Lead the structural design of towers (traction, transmission, and communication) and power supply system equipment including transformer foundations, switchgear structures, and control building supports. Review and approve structural calculations, GA drawings, reinforcement detailing, and fabrication drawings. Perform structural analysis using software like STAAD Pro, ETABS, or similar tools. Coordinate with electrical, civil, and architectural teams to ensure integrated design solutions. Oversee geotechnical investigations and incorporate soil reports into foundation designs. Ensure designs meet applicable IS, Euro, or ASTM codes and customer technical specifications. Conduct value engineering and design optimization for cost-effective solutions. Guide a team of structural engineers and review their deliverables. Provide technical support during construction, including resolving site queries and conducting site inspections when necessary. Prepare and review technical documentation for tenders and project execution. Show more Show less

Experience : 1- 3 Years Collaborate and work in a team environment with Design, Applications, Test, Marketing, Manufacturing, Quality and Reliability in all aspects of new product development, production release to accomplish goals and objectives Work with process and package technology development to develop and qualify technologies for new product development Work closely with the global manufacturing facilities to address customer specific product quality, yield management and cost reductions issues on mature products. Scope of work could include product spins and derivatives Develop and implement Qualification plans Design sHTOL, dHTOL, ELFR, BHAST, and PTC boards to qualify Analog products. Perform evaluation, debug and characterization of integrated circuits to ensure they meet the product requirement specifications and manufacturing requirements Work with failure analysis (FA) to determine root cause of any reliability and qualification failures Work with planning team to ensure smooth device ramp post release to manufacturing (RTM). Qualify second source wafer fab, assembly / test (A/T) facility, and Bill of Materials (BOM) to ensure device continuity of supply. Perform test conversion, test time reduction, and yield improvements to achieve device entitlement operational transfer cost (OTC). Work with wafer fabrication, assembly & test sites to guarantee schedule, cost and quality Communicate weekly to management on status of each project Show more Show less

Job Title: Control Panel Manufacturing Workshop Supervisor Location: Turbhe navi Mumbai Department: Electrical / Manufacturing Reports To: Production Manager / Operations Manager Job Type: Full-time Job Summary: We are seeking a skilled and hands-on Workshop Supervisor to oversee the day-to-day operations of our control panel manufacturing workshop. The ideal candidate will be responsible for managing workshop staff, ensuring timely and high-quality production of electrical control panels, maintaining workflow efficiency, and ensuring adherence to safety and quality standards. Key Responsibilities: Supervise and coordinate daily activities of technicians and electricians in the workshop. Plan, schedule, and allocate work to meet production deadlines and project timelines. Read and interpret electrical schematics, panel drawings, and wiring diagrams. Ensure all control panels are assembled, wired, and tested in accordance with specifications and industry standards. Monitor the use of materials and manage inventory to prevent shortages or delays. Perform quality checks and ensure all products meet safety and functional requirements. Implement and maintain health and safety procedures within the workshop. Train and mentor team members to enhance their skills and performance. Collaborate with design, procurement, and project teams to resolve technical issues. Maintain production records, job cards, and progress reports. Qualifications and Experience: Diploma or Bachelor's degree in Electrical Engineering or related field. Minimum 5 years of hands-on experience in control panel manufacturing, with at least 2 years in a supervisory role. Strong knowledge of electrical standards (e.g., IEC, UL, NEC). Ability to read and understand technical drawings and schematics. Excellent leadership, communication, and organizational skills. Proficiency in using workshop tools and equipment. Knowledge of quality and safety standards applicable to electrical fabrication. Preferred Skills: Familiarity with PLCs, VFDs, motor starters, and industrial automation components. Experience with ERP systems and production tracking software. Lean manufacturing or continuous improvement experience is a plus. Show more Show less

Thorough knowledge and hands on experience of specification, fabrication, and erection techniques of piping, structural and equipment or complete gamut of Civil activities of the project in greenfield and brownfield projects. Hands on experience in managing interfaces of activities of Civil, Electrical and Instrumentation disciplines in the project. Experienced in managing large and complex Projects, Coordinates with key stakeholders like Client, Consultant, Sub Contractors, and Project Manager. Lead and direct Planning, Contracts, Procurement, and Execution team to complete the works and creates a detailed plan that outlines the resources, timeline, and budget for the project. Enforce safety standards and ensuring that all workers follow safety protocols. Responsible for acquiring and managing the resources needed to complete the project, including materials, equipment, and personnel. Plan and coordinate with subcontractors and multi-disciplinary teams to accomplish the scope without any clashes. So, this role requires excellent problem-solving and communication skills to manage tasks concurrently and sequentially. Review of the project status frequently, report to higher management and take course-corrective actions in the project as may be required. Must adopt to changing project requirements and deadlines and align the teams to prioritize the tasks and to optimize or share the resources to improve productivity. Specific responsibilities of the RCM must include: o Overseeing and managing the construction activities at the Project site, including coordinating with contractors and the project team. o Monitor the progress of the project and adjusts as needed to keep the project on track. o Identify and manage the risks that may impact the project, including developing contingency plans to mitigate potential problems. o Maintain accurate and up-to-date records of the project, including progress, delays, risks. o Responsible for managing costs of the project within budget and ensuring profitability as committed. o Lead the project team, providing direction and support to ensure that the project is completed successfully. o Must be a keen observer and heuristic in nature to build processes and systems. Active involvement in adoption and support to Digitalization. Show more Show less

Job Title: Dental Technician – Crown & Implant Specialist (CAD/CAM) Location: Bangalore, Karnataka Job Type: Full-time Salary: ₹20,000 – ₹30,000 per month (based on experience) Language Requirement: Kannada (Mandatory) Company Overview: We are a leading dental practice/laboratory in Bangalore, committed to delivering high-quality prosthetic and restorative dental solutions. We take pride in our precision, efficiency, and use of modern dental technology to serve dentists and patients with the best possible outcomes. Job Description: We are seeking a skilled and detail-oriented Dental Technician specializing in crown and implant crown fabrication with hands-on experience in CAD/CAM technology . The ideal candidate should be proficient in working with a variety of dental materials and systems and must be able to communicate effectively in Kannada. Key Responsibilities: Design and fabricate crowns , bridges , and implant prostheses using CAD/CAM systems (e.g., Exocad, 3Shape). Operate and maintain dental milling machines and 3D printers. Wax-up, build-up, and finish ceramic/zirconia-based crowns and restorations. Collaborate with dentists for case planning, fit, and aesthetics. Ensure high precision, quality, and timely delivery of dental prostheses. Maintain clean and organized workspaces and follow lab protocols. Required Qualifications: Diploma or Certification in Dental Technology. Minimum 2 years of experience in crown and implant prosthetics preferred. Proficient in CAD/CAM software and systems . Strong understanding of dental anatomy, occlusion, and aesthetics. Knowledge of dental materials (zirconia, lithium disilicate, PMMA, etc.). Ability to communicate in Kannada fluently (mandatory). Preferred Skills: Experience with Exocad , 3Shape , or similar dental design software. Understanding of digital workflows and STL file handling. Excellent attention to detail and artistic skills. Team-oriented, responsible, and professional attitude. Benefits: Competitive salary based on experience. Opportunities for skill development and training. Supportive work environment with modern lab equipment. Work Location: On-site – Sujays Dental Care, 1st Block, 3rd Phase, Landmark: Opp. Kathriguppe, #55, Water Tank Rd,Banashankari 3rd Stage, Bengaluru, Karnataka 560085 Job Type: Full-time Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Health insurance Paid sick time Paid time off Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! POSITION PURPOSE/MISSION: Mechanical and electrical repair of equipment and cranes, including preventative maintenance and responding to breakdowns. Perform welding and fabrication work as needed. PHYSICAL REQUIREMENTS: Constant standing Occasional lifting up to 100 lbs., with some twisting and bending MINIMUM QUALIFICATIONS: High School Diploma or GED equivalent Basic mechanical and maintenance aptitude Ability to use basic math skills Ability to read and understand and follow operating and maintenance instructions Good written and verbal communication Ability to work well with other employees Proven ability to troubleshoot and problem-solve Demonstrated commitment to safe working behaviors including lockout, fall protection, confined space and mobile equipment operation PREFERRED QUALIFICATIONS: Basic knowledge of hydraulics, pneumatics, power transmission, machine installation, welding, and pipefitting Five plus years of mechanical and electrical repair experience Safety awareness training MAJOR ACCOUNTABILITIES: Mechanical and electrical repair of bailing, shearing, and crane equipment when a breakdown occurs Perform welding and fabrication work as needed Complete preventative maintenance as needed Other general repair work as needed Ensure a safe work environment and contribute to a highly engaging culture that fosters safety, continuous improvement, teamwork, and trust POSITION CHALLENGES: Ability to work in adverse environmental conditions that may include dirt, grease, heat and cold We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO). Show more Show less

Overview QSC thrives where innovative technology and compelling audio-visual experiences intersect. For over 50 years, QSC has pioneered the technology and solutions that enable digital collaboration and meeting experiences, live performance audio, themed entertainment, and immersive cinema for our customers and partners around the world. A globally recognized innovator in the design, engineering, and manufacture of category-leading high-performance loudspeakers, digital mixers, power amplifiers, audio processors, digital cinema solutions, video, and control products. The PCB Design Engineer will be responsible for the layout of complex printed circuit boards including Digital, Analog & Mixed Signal technology. Candidate must have well-developed competency in PCB design & manufacturing and should have designed 2- 8 layers with flat & hierarchical schematics. By joining the QSC team, you will own the PCB layout, work with Electrical, Mechanical, Manufacturing Engineers, and Project leaders to ensure designs are on schedule with high quality and reliability in our Bangalore Design Center. You will be exposed to a challenging, collaborative, fun, and innovative environment. We encourage employees to take ownership, to color outside the lines, and to imagine possibilities. Our culture is casual but dynamic, with cross-functional teams collaborating to create memorable audio-visual experiences that bring joy to people, wherever they are. At QSC, fun and hard work go hand in hand. Join us and make a difference in the way people experience movies, meetings, presentations, live performances, and much more. This position is based in Bengaluru, India. Responsibilities Design PCB layout from a range of products within the audio, video & control industry Manage all activities associated with components life cycle longevity, ECAD library management, and PCB layout design. Work collaboratively with the design engineering team in multiple US locations Work with the NPI team in USA and China/Mexico to ensure PCB release documentation is complete and improves products manufacturability both at QSC manufacturing and CM sites. Provide engineering support for EOL/LTB for components and materials. Define technical and program direction, priority, and processes necessary to support the manufacture of products and improvement of manufacturing processes. Work with the Manager and Senior Engineer of Hardware Engineering to develop, track, and communicate tasks to meet timing and feature/quality objectives for new product development and sustaining engineering projects. Work closely with New Product Development, Manufacturing, Quality, and Test Participates in design reviews and provides design feedback to peers and design partners. Performs other duties as assigned. Qualifications B.E in Electrical Engineering or equivalent 5+ years of work experience designing, building, testing analog and digital circuits and related subsystems, ideally in commercial or professional video or audio/video markets is preferable. Must have good experience with Schematic design, Footprint/library creation (both SMT & thru-hole components) using IPC Standards, PCB layout using manual and auto routing, good knowledge of SMT packages, generation of design files, involved in complete documentation package including BOMs, fabrication and assembly drawing. Experience working with Altium, Cadence tool and Hyperlynx for Signal Integrity should be an added advantage. Independently handled PCB Design for Multilayer, Flex and HDI boards Good understanding of PCB stack up requirements to finalize the same based on design complexity and design requirements. Experience in Power supply layout design i.e., AC/DC, DC/DC converter and Audio amplifier and well versed in blind, buried laser micro via and technologies. Experience in High-speed design like DDRx, PCIe, MIPI, LVDS interfaces, Audio and Video Design i.e., Cameras, LCD, HDMI and familiar with transmission line concepts. Worked on High-Speed signal routing for 28Ghz or more, different routing topologies for BGA packages, high speed bus routing, differential pairs, and impedance control routing to meet signal integrity. Experience in DFA, DFM, DFT and EMI - EMC standards as well as processes and design implementation Candidate will also work directly with PCB fabricators on technical questions and fabrication issues and responsible for mentoring junior designers, if needed. Excellent communication and problem-solving skills: issue identification, resolution, providing mentorship and guidance to team members. Ability to work in an environment where process and standards are often not well defined and to develop and work to standards where standards do not exist. Experience implementing hardware-software & embedded concepts (FPGAs, SoCs, device drivers, soft-core processors, microcontrollers, micro-code) Results-driven, self-motivated, and enthusiastic. Show more Show less

Overview You don't have to be an employee long before you understand the SSOE difference. It goes back to our history of reinventing ourselves for new markets, serious rates of growth year after year, and being ahead of the curve in technology. Those are the achievements of a company that rewards talent and effort in ways that mean the most to the individual. When you work at SSOE, you work with the best and you're a part of something bigger than yourself. And providing the best possible workplace for our employees gives us a competitive advantage-helping us attract and retain top talent and drive better business results. Responsibilities The following duties are typical of the position but are not all encompassing. Responsibilities include those required to deliver quality service on schedule and within budget in a team environment. Performs a variety of routine engineering assignments under the direction of a supervisor with increasing responsibility based on performance. Works under the direction of a supervisor on specific and limited portions of a broader assignment that requires some supervision. Ability to read P&IDs, pull the necessary data and transfer to equipment & piping design utilizing standard design techniques and use industry best practices. Drafts interpretation of own design into completed working drawings and applies engineering fundamentals to design. Performs routine calculations related to Machine design. Study SSOE and client’s CAD standard and demonstrate attention to detail. Organizes and maintains project design records. Organize maintenance spare parts and structure them in client’s SAP system. Communicates with supervisor concerning progress or problems in an assigned task. Qualifications What You Will Bring: Diploma or certification in mechanical discipline from an accredited institute. Autodesk Inventor 3D and AutoCAD 2D experience mandatory. Plant 3D experience is a plus. 5-7 years of experience in design field. Experience with Material Handling equipment, packaging equipment, ductwork systems, fabrication weldments. Experience with SAP system is a plus. Must have excellent written and verbal communication skills. Should be familiar with international codes and standards (preferably USA codes). Willing to work in the late evening hours to attend meetings with US counterpart & as per project requirement. Additional Perks Offered A collaborative and supportive culture where you’re not just a number—you’re a critical and highly valued member of our team! Hybrid work module As part of a multidisciplinary team, you will experience exciting projects from start to finish and interface directly with some of the most forward-thinking clients in the world. A mindset of continuous learning where you are encouraged to ask questions, bring fresh ideas to the table, and pursue your professional development goals. A diversity of market sectors, project types, and geographic locations that help insulate your career from economic ups and downs. A formal career path and real opportunities for advancement. A holistic approach to compensation and benefits that supports your physical and mental health, encourages work-life balance, and empowers your career advancement and financial success. SSOE – The Best of Both Worlds At SSOE, Our Growth Trajectory Allows Us To Offer The Opportunities Normally Associated With a Large Firm While Embracing The Collaborative And Supportive Culture Often Found In Smaller Firms. As a Member Of The SSOE Team, You Will Work On Exciting And Diverse Projects For Fortune 100 Clients Around The Globe, Supported By The Best Technology For The Task At Hand. You Will Experience Our Employee-centric Culture That Strives To Offer a Healthy Balance, Flexible Working Arrangements, Direct Access To Leadership At All Levels, And a Mindset Of Continuous Learning. Once You Experience The SSOE Difference, You’ll Understand The Why Behind Our Metrics 28% - of our employees have been with SSOE for 10 years or more. 15% - percentage of employees with tenure exceeding 15 years. 99% - our CEO’s approval rating on Glassdoor. 98% - portion of our clients who say they would recommend us to a colleague #process-position Show more Show less

Job Area: Engineering Services Group, Engineering Services Group > PWB Design General Summary: The successful candidate will operate as a member of the Corporate Engineering unit, PWB CAD department, and will be able to provide PWB design solutions for a variety of design types. For exampleProduct Test Engineering (PTE) designs - (UFLEX/IFLEX Probe cards, 93K DIB, Bench boards and Daughter Cards, Socketed and Solder down, HTOL, etc.) with multiple DUT sites up to 32X. Emulator designs - large/high density digital designs having high layer counts (24-34 layers) and containing several FPGA's (>1500 pins) along with very high-speed digital signals. Reference handset designs - 'form factor accurate' (FFA) circuit boards. These boards require mastery in digital processors, RF and radio circuits as well as power control devices. Experience with micro-vias (stacked), sequential lamination stack-ups and design rules using .5mm pitch and smaller packages. Responsibilities include working with US and India teams to provide PWB design solutions for high performance electronic assemblies for Mobile, Modem and IOT. Specific tasks include daily use of PWB CAD design software to perform placement and routing activities to meet mechanical and electrical design constraints and requirements. Exchange of electronic file transfers to/from mechanical and electrical engineers to ensure compliance to fit, form and function as well as power and signal integrity requirements. Creating fabrication and assembly drawings and working with internal teams and external suppliers to support PWB fabrication and assembly. The candidate will interface with internal staff and outside partners in the fast-paced execution of a variety of multi-disciplined projects. Leadership skills are expected on all projects to help direct, capture and interface with outside consultants. The candidate is expected to have proficiency on Mentor Xpedition, Mentor PADS and Cadence Allegro PWB design software and is expected to have multiple years of experience in developing PWB design solutions for a variety of design types and working with internal teams and external suppliers to support PWB fabrication and assembly. Minimum Qualifications: Associate's degree in Electrical Engineering, Computer Science, Mathematics, or related field and 5+ years of PCB layout handling or related work experience. OR High School diploma or equivalent and 7+ years of PCB layout handling or related work experience. 6-9 years actively involved in PWB design for high-density electronics packaging.6-9 years experience in a PWB design role designing consumer-grade mobile phones utilizing latest generation processor chips.Design for Manufacture (DFM) analysis experience utilizing Valor and/or CAM350 tools. Design experienceRF, Analog, High-speed digital circuits - DDR2, 3 & 4, HDMI, PCIe, SATA, MIPI, USB 2,3.x, GigE, ATE Platforms93K, uFlex and iFlex.Expected to possess a strong understanding and demonstrated application of PWB design principles, practices and standards.Able to perform complex and difficult PWB design tasks requiring extensive skill and knowledge of fabrication and assembly process capabilities and limitations.Develops solutions to a variety of complex problems and proposes PWB design trade-offs to the engineering design team for resolution and implementation.Determine PWB design trade-offs necessary to meet design requirements and produce high quality cost effective PWBs that meet schedule objectives.Understands the requirements driving PWB technology and process trends and their application to Qualcomm designs.Maintain technical coordination with Engineering and Manufacturing. Resolve PWB design issues with fabrication and assembly vendors.Participate and provide input into process improvement, PWB and DFM checklists and guidelines.Participates in determining objectives of assignment and plans, schedules and arranges own activities in accomplishing objectives.Experience working with on-board EMI shielding cans.Experience with IDF/EMN file exchange between mechanical and HW teams.Understands project goals and individual contribution toward those goals.Effectively communicates with project peers and engineering personnel via e-mail, web meetings, and instant messaging including status reports and illustrative presentation slides.Interact and collaborate with other internal PWB designers for optimal product development processes and schedule execution.Effectively multitasks and meets aggressive schedules in a dynamic environment.Prepare and deliver design reviews to project team.Possess excellent verbal and written communication skills.Leadership skills to help direct, prioritize, and clearly set project tasks per schedule. Communicate milestones and directions to outside team members.

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: The Qualcomm Self-Driving Team is looking for a vehicle tech that has experience working with ADAS and self-driving technologies. The ideal candidate will be familiar with vehicle sensor retrofits, creatively implementing mounting racks, installing vehicle logging system hardware, wiring, and technical troubleshooting. This candidate must also be able to perform vehicle maintenance and will work with the engineering team on calibration and data collection tasks. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. The candidate will be working as part of the Fleet team. Supporting all autonomous vehicle related activities. Focus on understanding all the hardware system architecture and sensor integration of our test fleet. Atleast 2-3 yrs of experience in Python development Exposure to ADAS Track inventory and project assets. Understanding Linux PC system setup and configuration. IP network setup and management. Perform diagnosis and repair of the vehicles electrical system, simple mechanical tasks and potential software issues (with guidance) Fabricate and installation and/or modify existing prototype components/fixtures Install sensor, test equipment, and other components in the vehicles in accordance with engineering specifications, standards, and/or test procedures Candidate will provide l ab support across the organization. This includes system h/w commissioning, bring up, networking, cabling, and racking as well as working with other support organizations as needed (IT, Lab org, proto) The candidate will need to be able to drive a car/vehicle. Drivers license should be in good standing. Support and travel for trade shows or weekend testing is expected. Data collection will be part of the duties which includes bring up of and basic trouble shooting of the vehicle stack. Candidate should have some basic general mechanical understanding. Record keeping of performed tasks. Communicate directly with engineers and other technicians to ensure a high level of technical support Minimum Qualifications: Highschool or some college 3+ years related lab and or field work experience. Technician/mechanic Valid driver license with clean record Good technical and mechanical ability Automotive electrical understanding Basic computer- Linux/Windows experience Preferred Qualifications: Experience in customer interaction for support, demo and trial. Advanced driver training of advantage Electrical knowledge and training Basic scripting in phyton Good understanding of QXDM, ADB, and/ or other logging and troubleshooting tools is a must. Willing to travel and weekend work Good communication skills and team player attitude with sense of urgency and responsibility is must. Experience in customer interaction for support, demo and trial. Expertise in wireless and wireline sensors (setup and installation) is Preferred

Job Title : Draftsman – Structural / Mechanical Location : Gandhidham, Gujarat Department : Engineering / Design Industry : Steel Plant / Manufacturing / Heavy Engineering Experience : 2 – 5 Years (or as per company requirement) Job Summary We are seeking a skilled Draftsman to join our engineering team at the steel plant in Gandhidham. The ideal candidate will be responsible for creating detailed 2D and 3D drawings for structural, mechanical, or plant layouts based on engineering specifications using AutoCAD or similar software. Key Responsibilities Prepare technical drawings , layout plans , and fabrication details for steel structures, piping, conveyors, and equipment supports. Convert conceptual designs and calculations into detailed engineering drawings. Work closely with project engineers, site teams, and vendors for drawing approvals and modifications. Maintain proper documentation and version control of all drawings. Ensure drawings comply with IS codes , industry standards , and company practices. Perform site measurements and update “As-Built” drawings as required. Coordinate with fabrication and erection teams for drawing clarifications. Key Skills & Software Proficiency AutoCAD (2D essential; 3D preferred) Knowledge of SolidWorks Basic understanding of steel plant layouts , mechanical components, and structural detailing Familiarity with fabrication tolerances and shop drawing practices Good communication and documentation skills Qualifications ITI / Diploma in Mechanical, Civil, or Draftsmanship 2–5 years of experience in a steel plant or industrial project environment Candidates with experience in steel structure drafting will be preferred Show more Show less

Your Job Koch Engineered Solutions (KES) is hiring a Sr. Manufacturing Engineer to support capital projects and assist in operational efforts to further support our international teams and global initiatives. This role will be responsible for global capital equipment acquisition to include developing the scope of work, financial justification, vendor qualification, approvals, and project implementation. They will also work to improve operational efficiencies and develop cross-functional coordination through multiple manufacturing sites. What You Will Do Lead capital equipment projects Drive best practices through continuous improvement projects Design and implementation of automation and digital transformation Improve manufacturing efficiencies and reduce manufacturing costs through lean and continuous improvement Provide training to cross-functional groups and lead process improvement teams on a global scale Lead product development projects and coordinate multiple manufacturing site capabilities 25-50% travel required including global travel Who You Are (Basic Qualifications) Requirements: Bachelor’s degree or higher in Mechanical Engineering, Mechatronics Engineering, Electronics Engineering or 8 years experience as a Manufacturing Engineer 8+ years manufacturing experience to include engineering, capital equipment, project management, automation, continuous improvement, cost reduction, quality, machining, welding, sheet metal fabrication, heavy fabrication, and assembly Strong communication and team building skills. English language proficiency required What Will Put You Ahead Master’s Degree in a related engineering field Project Management Experience CNC Programming Experience Robotic Programming Experience Process Simulation Development Experience Experience leading initiatives within a Lean Manufacturing environment to develop and execute continuous improvement efforts Experience using 2D and 3D modeling software Experience using PowerBI Experience using CAM/CAD software Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Who We Are At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. KOCH is an Equal Opportunity Employer. Show more Show less

Overview You don't have to be an employee long before you understand the SSOE difference. It goes back to our history of reinventing ourselves for new markets, serious rates of growth year after year, and being ahead of the curve in technology. Those are the achievements of a company that rewards talent and effort in ways that mean the most to the individual. When you work at SSOE, you work with the best and you're a part of something bigger than yourself. And providing the best possible workplace for our employees gives us a competitive advantage-helping us attract and retain top talent and drive better business results. SSOE is currently seeking a Mid-Level Structural Engineer to join our growing structural team. Projects will vary in size, nature and scope, but include Industrial, manufacturing, Commercial, healthcare and Institutional projects. Experience with BIM software package including Revit Structures as well as structural analysis and design software package including RISA-3D, RISA Connection and RISA Foundation is required. Experience in structural analysis, design and detailing of steel, rcc, masonry, joist, cold-formed and pre-cast structures is required. Responsibilities The following duties are typical of the position but are not all encompassing. Responsibilities include those required to deliver quality service on schedule and within budget in a team environment. Collect information from all available sources in order to prepare accurate and complete designs and drawings. Study of input data from Section Manager & Laying out of GLRS & LLRS in schematic design stage. Preparation of drawings & schedules using Indian and foreign codes. American codes are preferred. Preparing designs predominantly Steel structures, for industrial plants, factories, warehouses etc. Preparing designs with various construction materials including masonry, joist, cold-formed and pre-cast. Performing design work in Revit software and review of 3D models. Attending review meetings and suggest necessary changes for the design and development of projects. Preparation of BOQ, specifications etc. Checking shop drawings/fabrication drawings. Preparation of Monthly, Weekly and Daily plan and Monitoring the project progress and highlighting critical issues as and when required. Feedback to Management & Client with necessary reports. Coordination with global offices and also with the internal departments like Plant Layout, Mechanical & Product teams for obtaining inputs, clarifications, interface checking and loadings. Qualifications What You Will Bring: Bachelor’s Degree in Civil or Structural Engineering (Master’s Degree preferred). Experience with analysis and design of structural steel and concrete structures of significant complexity utilizing structural analysis & design software RISA and Revit. Good working knowledge of Building Codes and standards (e.g. IBC, ASCE7 etc.) as well as AISC & ACI Materials Codes & other referenced standards. Strong desire to develop new designs / technology. Enthusiastic, able to work well under pressure. Excellent interpersonal and analytical skills. Self-starter and goal oriented. Attention to details and strong sense of responsibility. Team-player– Willing to work in the late evening hours to attend meetings with US counterpart & as per project requirement. Fluent in English. Ability to work well and be a contributor in a dynamic team environment Additional Perks Offered A collaborative and supportive culture where you’re not just a number—you’re a critical and highly valued member of our team! As part of a multidisciplinary team, you will experience exciting projects from start to finish and interface directly with some of the most forward-thinking clients in the world. A mindset of continuous learning where you are encouraged to ask questions, bring fresh ideas to the table, and pursue your professional development goals. A diversity of market sectors, project types, and geographic locations that help insulate your career from economic ups and downs. A formal career path and real opportunities for advancement. A holistic approach to compensation and benefits that supports your physical and mental health, encourages work-life balance, and empowers your career advancement and financial success. SSOE – The Best of Both Worlds At SSOE, Our Growth Trajectory Allows Us To Offer The Opportunities Normally Associated With a Large Firm While Embracing The Collaborative And Supportive Culture Often Found In Smaller Firms. As a Member Of The SSOE Team, You Will Work On Exciting And Diverse Projects For Fortune 100 Clients Around The Globe, Supported By The Best Technology For The Task At Hand. You Will Experience Our Employee-centric Culture That Strives To Offer a Healthy Balance, Flexible Working Arrangements, Direct Access To Leadership At All Levels, And a Mindset Of Continuous Learning. Once You Experience The SSOE Difference, You’ll Understand The Why Behind Our Metrics 28% - of our employees have been with SSOE for 10 years or more. 15% - percentage of employees with tenure exceeding 15 years. 99% - our CEO’s approval rating on Glassdoor. 98% - portion of our clients who say they would recommend us to a colleague Show more Show less

Your Job We are seeking a highly skilled and detail-oriented Associate Design Engineer who is specialized in CAD tools (preferably UG-NX) and PLM software (preferably Teamcenter/ECTR). As a key member of our engineering team, you will be responsible for creating and modifying 3D models and drawings using Siemens NX software, managing data within Teamcenter, and collaborating with cross-functional teams to support product design and development processes. The ideal candidate will possess a strong technical background in mechanical engineering, excellent CAD skills, and a deep understanding of product lifecycle management. Our Team This team provides, Gage and fixture , Application tooling , Tester system and Product support services to Datacom and Specialty Solutions Division stakeholders who are located at Molex sites across the globe. The position will be part of this engineering team at Molex India Business Services. What You Will Do Utilize Siemens NX software to develop 3D models and assemblies of mechanical components, ensuring accuracy, precision, and adherence to design specifications. Collaborate with design engineers to interpret technical drawings, sketches, and specifications, and convert them into detailed 3D models and 2D drawings. Create and maintain engineering documentation, including bills of materials (BOMs), engineering change orders (ECOs), and release packages, within Teamcenter. Manage and organize CAD files, ensuring proper version control and data integrity within Teamcenter. Support design reviews and participate in cross-functional meetings to provide technical insights and recommendations for design improvements. Perform tolerance analysis and verification of parts and assemblies to ensure fit, form, and function. Conduct design feasibility studies, identifying potential issues or constraints and proposing solutions to optimize product design. Collaborate closely with manufacturing and production teams to address design-related issues, resolve manufacturing discrepancies, and support the development of efficient manufacturing processes. Stay updated with industry trends, advancements, and best practices related to CAD modeling, NX software, and Teamcenter usage, and apply them to enhance design efficiency and quality. Perform other related duties as assigned by management. Who You Are (Basic Qualifications) Bachelor of Engineering in Mechanical 1-3 years design experience of electromechanical products – components and assemblies Good knowledge and understanding of fixtures, locating and clamping devices, guides and aligners based on project needs Good understanding of manufacturing process such as molding, sheet metal tooling, fabrication of components and assembly processes Proficient in using solid modeling software (Siemens NX) to generate 3D models & 2D drafting Strong English verbal and written communication skills that demonstrate the ability to express complex technical concepts clearly and concisely Proficient with Microsoft Word, Excel, and Power Point Good interpersonal skills to work effectively with others and in a team Good Exposure to GD& T Ability to work independently, manage multiple tasks simultaneously, and meet project deadlines. What Will Put You Ahead Should possess good knowledge in Product design, Electromechanical & machined components 1-3 years in Design Engineering function engaged in design modification and sustenance of Gage & fixture, tooling background Proficient in Siemens NX, Team Center and PLM/PDM Material and manufacturing knowledge of plastic, Electromechanical & machined components At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Who We Are {Insert company language from Company Boilerplate Language Guide} At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Show more Show less

Awareness of all fabrication standards ASME, PED, DIN AWS etc. Knowledge about the vendor development Cost and budget calculation knowledgeNDT awareness Knowledge of latest welding technology & all welding process like GTAW ,SAW ,SMAW, FCAW, GMAW Required Candidate profile Increase production, assets capacity & flexibility while minimizing unnecessary costs and maintaining current quality standard Be responsible for production output, product quality & on-time delivery

Position Overview: The Fitting Technician at will be responsible for managing the entire lab operations, ensuring precise fitting of spectacles according to customer orders, and coordinating with various teams to meet delivery timelines. The ideal candidate will be detail-oriented, with strong organizational skills and the ability to maintain high standards of quality and efficiency. Min 2 years of fitting experience required.

Role & responsibilities Work with NPD to ensure Overall Execution of NPD Prototype Projects as per New Product Launch Plan Collaborate with NPD, AE, Purchase, Supplier and Manufacturing to achieve FTR in Product Monitor the existing manufacturing process and work on its Continual Improvement Design Review to identify the manufacturing issues and make the necessary technical discussion with Engineering before approving of Drawing. Responsible for Execution of New Product Jigs and Fixtures Concept Design and Development Perform Root Cause Analysis and resolve problems Ability to generate Cost saving ideas Preferred candidate profile

About Us We are a global climate technologies company engineered for sustainability. We create sustainable and efficient residential, commercial and industrial spaces through HVACR technologies. We protect temperature-sensitive goods throughout the cold chain. And we bring comfort to people globally. Best-in-class engineering, design and manufacturing combined with category-leading brands in compression, controls, software and monitoring solutions result in next-generation climate technology that is built for the needs of the world ahead. Whether you are a professional looking for a career change, an undergraduate student exploring your first opportunity, or recent graduate with an advanced degree, we have opportunities that will allow you to innovate, be challenged and make an impact. Join our team and start your journey today! BE/BTech – Mechanical 2-3 Years of experience in Product Design and Development of compressor or any other rotating machines applied primarily in Refrigeration/ Air conditioning or Biogas Processing Systems. Hands on experience in handling mid to complex projects demanding high proficiency in Mechanical Design/Thermal Engineering. Very keen on creativity and Innovation and self-motivated to drive innovation proficient in applying the technical understanding and design principles to the product design and should be able to correlate with actual product testing. Broad knowledge of Manufacturing processes and typical assembly and fabrication methods with some emphasis on comprehension of current practices. Experience in manufacturing process ability to corelate manufacturing requirements with design is must Excellent communication and interpersonal skills, well conversant with presentation through MS Tools. Excellent command over English language both written and verbal, High on problem solving decision making, positive attitude team player, creative affinity to learn new things. Key Responsibilities Individual contributor – handle project from start to end with complete project ownership. Develop 3D solid models and assemblies of design components. Interact with other design team members to meet and optimize product design requirements. Adherence to quality process. On time delivery quality of the deliverables. Assume additional roles and responsibilities as required. Capable of handling multiple projects. Communicate and coordinate results with the team members. Collaboratively work with other teams. Willing to learn is critical. Drive various organizational initiatives. Person will be handling all Engineering change requests/Notifications independently. Skill Requirements Software skills: Autodesk inventor, Vault & AutoCAD (expert level), Aware of PDM Practices. Knowledge of strong modelling and drafting practices. Good knowledge of refrigeration and air conditioning and equipment’s involved in the systems. Good drawing reading and understanding abilities. Respect company’s values and ethics. Good communication skills are desirable. Prior working experience in global engineering environment is preferred. Our Commitment to Our People Across the globe, we are united by a singular Purpose: Sustainability is no small ambition. That’s why everything we do is geared toward a sustainable future—for our generation and all those to come. Through groundbreaking innovations, HVACR technology and cold chain solutions, we are reducing carbon emissions and improving energy efficiency in spaces of all sizes, from residential to commercial to industrial. Our employees are our greatest strength. We believe that our culture of passion, openness, and collaboration empowers us to work toward the same goal - to make the world a better place. We invest in the end-to-end development of our people, beginning at onboarding and through senior leadership, so they can thrive personally and professionally. Flexible and competitive benefits plans offer the right options to meet your individual/family needs. We provide employees with flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Together, we have the opportunity – and the power – to continue to revolutionize the technology behind air conditioning, heating and refrigeration, and cultivate a better future. Learn more about us and how you can join our team! Our Commitment to Inclusion & Belonging At Copeland, we cultivate a strong sense of inclusion and belonging where individuals of all backgrounds, and with diverse perspectives, are embraced and treated fairly to enable a stronger workforce. Our employee resource groups play an important role in culture and community building at Copeland. Equal Opportunity Employer Copeland is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Show more Show less

About The Role We are seeking an experienced and proactive Planning Manager / Head to lead and support critical functions in our Planning Department, focusing on GFBD (Granulation, Fluid Bed, Drying) projects. The ideal candidate will bring expertise in production planning, vendor coordination, and cross-functional collaboration, especially in the pharmaceutical machinery domain. Key Responsibilities Drive the development of detailed Bar Charts and Flowcharts for production schedules Leading the team. Lead planning for Raw Material and Bought-Out Components based on GADs and BOMs Coordinate Control Panel IO list preparations Evaluate and negotiate Job Work Costing (Laser Cutting, Press Work, Electropolishing, etc.) Prepare and verify Packing Lists and Process Charts Manage sourcing and procurement of Fabricated and Machined Components Develop cost estimates and manage purchase indents through ERP systems Identify and onboard New Vendors for fabrication, machining, and labor-intensive tasks Conduct periodic planning reviews to ensure production timelines are met What We’re Looking For 🎓 Qualification: B.E. – Mechanical Engineering (Mandatory) 🕒 Experience: 12–18 years in Planning/Production (Pharmaceutical machinery experience is a strong advantage) 📍 Location Preference: Candidates residing in Thane or Mumbai 🧠 Key Skills ERP and AutoCAD proficiency Strong understanding of BOM, fabrication processes, and vendor management Excellent negotiation and communication skills ✅ Behavioral Traits Strong leadership potential Detail-oriented with a commitment to deadlines Positive and proactive work attitude Why Join Gansons? Work with one of India’s most respected engineering firms in the pharmaceutical sector Contribute to high-impact projects with global relevance Grow within a professional and technically strong team Show more Show less

About the Role: We are seeking a skilled and experienced engineering professional for fabrication projects involving pressure vessels, tanks, piping systems, structures, steel stacks, and welded assemblies. Key Responsibilities: Prepare preliminary drawings for bid submissions and technical proposals Perform fabrication engineering tasks, including calculations, material selections, and technical recommendations Develop and produce technical drawings, fabrication plans, and documentation in line with project specifications and industry standards Required Technical Expertise: Strong knowledge and application of the following codes and standards: API 620 and API 650 ASME Section VIII, Division 1 CSA B31.1 and B31.3 Solid understanding of key fabrication shop processes: Plate rolling, bending, and forming Welding (including associated constraints, WPS, and inspection protocols) Machining and finishing processes Ideal Candidate Profile: Experienced engineer specializing in the design and fabrication of welded assemblies, tanks, piping systems, and structural components, Steel Stack Demonstrated ability to work autonomously, manage priorities, and deliver accurate, high-quality technical documentation within short lead times Prior experience in industrial sectors such as energy, mining, oil & gas, or chemical processing Qualifications/Skills: B.Tech/M.Tech in Mechanical Engineering or a relevant technical degree SolidWorks, Inventor, Nastran, PV Elite , AutoCAD Strong organizational and communication skills Work Experience: 5+ Years of experience in static/ dynamic equipment design Industry: Energy, Mining, Oil & Gas, Industrial Processing Show more Show less

Position: Tekla Structures Trainer Location: Ahmedabad Job Summary: We are seeking a skilled and passionate Tekla Structures Trainer to provide professional training to individuals or teams in steel detailing using Tekla Structures. The ideal candidate will have extensive hands-on experience with Tekla Structures and a strong ability to teach both fresher and experienced professionals through a structured training approach. Job Description: Conduct structured training sessions on Tekla Structures (basic to advanced levels). Teach steel detailing, 3D modeling, drawing generation, import and export of deliverables. Develop and update training materials, manuals, and exercises. Provide hands-on guidance and real-world project examples. Assess trainee performance and provide constructive feedback. Customize training programs based on trainee needs or project requirements. Stay updated with the latest Tekla versions and industry standards. Support onboarding and skill development of new team members. Collaborate with project and technical teams to align training with company workflows. Offer post-training support to ensure practical application of learned skills. Educational Qualification: Diploma or Degree in Civil Engineering, Structural Engineering, or a related field. Experience: Minimum 5 years of hands-on experience in Tekla Structures. Strong background in steel detailing and structural modeling. Prior experience in training, mentoring, or teaching is highly preferred. Technical Skills: Proficient in Tekla Structures (modeling, detailing, drawing creation, and reports). Knowledge of fabrication and construction standards. Familiarity with related software (AutoCAD, Revit, Navisworks) is an advantage. Soft Skills: Excellent communication and presentation skills. Ability to explain complex concepts in a simple and clear manner. Patience and adaptability to different learning speeds. Strong organizational and assessment skills. If interested, please share resume on rajik.sharma@stridelysolutions.com Show more Show less

This role is for one of Weekday's clients Min Experience: 15 years Location: Ahmedabad JobType: full-time Education: B.E. Electrical / Any masters in Electrical Requirements About the role Greetings from Synergy Resource Solutions, a leading HR Management Consultancy. Our client is a global leader in water technology and services for industrial and infrastructure markets. With a focus on solving water scarcity through desalination, water reuse, and zero liquid discharge (ZLD), they have executed over 2,000 projects across 60 countries. Leveraging the experience and knowhow gained over 40 years handling some of the most difficult to treat waters, they help some of the world's most recognized companies reduce their water and carbon footprint, ultimately reducing water risk. Your duties and job responsibilities will include but not be limited to the following : Study & understand the allocated work. including the following input documents Project PID's Design plan for E & C Department & refer customer spec independently and as necessary, & solicit clarification as deemed necessary Obtain & review input documents from the upstream disciplines, such as datasheets and /or drawings for instruments, packaged equipment, Project submittal schedule Job Description: To facilitate the design of Electrical and control system drawings for project assigned in collaboration with the designer/ drafter of the department resources & ensure that the designs meet the expectations of requirement and outputs are error free. The dwg s include but not limited to Develop a detailed IO list, control system architecture design Oversee the design of Skid / Field instrument JBs, PLC control panels complete with schematics, module wiring, terminal wiring , panel layout, instrument connection diagrams, and Bill of Materials list for al designs Develop Single Line diagrams ( MV & LV), control schematic for Motor control centers & other equipment Solicit quotes for MCC & other equipment as applicable Select & prepare datasheets & facilitate designs for Variable frequency drives- both free standing and panel mounted types Select & prepare datasheets & Develop heat tracing designs calculations & facilitate these designs for installation on skids/ interconnecting piping For projects involving power systems, undertake Power System studies - Load flow, short circuit, grounding studies, Design of power systems, SWGR, Transformers, MV VFD, LV VFD, MV Switchgear, LV MCC, VFDs, Cable trays, cable design, lighting, lightning protection, UPS, grounding design , UPS & Battery systems, DG Sets, Work along with Mechanical engineering department for Cable Tray Routing, Grounding/ Earthing design, including Layout drawings Lighting layout design & Lighting calculation & Review all drawings and designs, including BOM for accuracy & validation of parts Use check lists to verify the drawings, perform engineering release of documents Upload materials (to the SAP system) to be procured to facilitate manufacturing Undertake vendor quotes review & make a purchase recommendation Use sub vendor dwgs for proper integration with the balance of plant design Review & reconcile the design that has been developed Undertake drawing revisions. This may involve cross discipline necessitated changes, or customer comments Maintain all records per ISO-9000 Facilitate performance reviews of designers/ drafters working on projects Team handling Skill Requirements: Skilled in Electrical & Control systems design, Working knowledge of ISA, NEC, NEMA, UL, NFPA, IEC, CE, API & other equivalent international standards Proficiency in using AutoCad Electrical, MS Word & Excel MS Office or the Ability to become proficient in MS Office Familiar with the implementation of process instrumentation and control systems, electrical engineering as applicable to power/process industries Experience in design & engineering of PLC / HMI, DCS & control systems Experience in power or petroleum or process industries Ability to communicate effectively with customers/suppliers Excellent written and verbal communication skills Attend the customer / vendor interface meetings Maintain positive attitude and good organizational skills Capability to work in teams across the company locations Willingness to work extra hours when situation requires Ability to plan and manage multiple projects Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Participate in interdepartmental meetings as needed to facilitate the integration of design across disciplines Provide technical support during fabrication and/or other site queries as required during fabrication, assembly & startups/ commissioning Provide support to other employees in the department as required Follow the ISO requirements, departmental and company procedures To undertake specialized assignments as allocated by management from time to time Show more Show less

Looking for challenging role? If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time? At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you? Siemens Energy India Limited, is seeking a responsible, professional, and self-motivated individual to join the Gas Turbine R&D, Gurgaon as “Gas Turbine – Combustion Mechanical design engineer”. This position provides an exciting opportunity to work in a fast-paced, dynamic, global product development & service environment. Your new role – challenging and future- oriented: Responsible for designing of Gas Turbine Combustion and casing components (e.g., combustion liner, nozzles, transition duct, fuel piping system, exit diffusers, casing etc.) to meet full spectrum of design requirements (functionality, robustness, cost effectiveness, manufacturing requirements and technology, assembly requirements and service requirements) Applies appropriate methods which focus on robust design, like tolerance stack up, GD&T, analysis, standards, and design rules. Create and finalize the design concept working closely with FEA analyst, HT engineer, Aero-designer to do the design changes from conceptual design to final product design. Technical checking of Engineering drawings/PMI and BOM of Gas Turbine components. Development of innovative design solutions. Controls risk of design changes with appropriate methods like FMEA, QFD. Creates, evaluates, reviews technical documents, e.g. purchasing specification, working specification, check lists, standard part calculations. Execute/support technical reviews, risk assessments, serviceability, and fault report considerations. Explore cost reduction opportunities. We don’t need superheroes, just super minds: Bachelor, master’s or PHD in mechanical engineering/design from recognized college/university At least 8 years of work experience with mechanical design exposure in an engineering organization. Experience in Gas Turbine combustion component will be preferred. Basic Knowledge of mechanical design, strength of material, thermodynamics, heat transfer. Desirable to have of knowledge of Gas turbine combustion principles, thermo-acoustics, aero-design principles, emissions etc. Basic mechanical integrity knowledge with ability to perform simple hand calculations. Working experience to apply GD&T and tolerance stack up. Sound knowledge of manufacturing/assembly/fabrication processes Exposure to CAD software (UG-NX preferred), SAP, PLM, CPD Teamcenter, MS Office. Good communication skill in English language (Verbal & Written). Strong inter-personal skills i.e., team player, quick learner, imaginative, innovative etc. We’ve got quite a lot to offer. How about you? This role is based at Site (Gurgaon). You’ll also get to visit other locations in India and beyond, so you’ll need to go where this journey takes you. In return, you’ll get the chance to work with teams impacting entire cities, countries – and the shape of things to come. We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow. Show more Show less

SUMMARY Welder We are seeking a dedicated welder to contribute to our company's success by maintaining machinery that fabricates and repairs metal structures, tools, and equipment. The ideal candidate will be responsible for completing welding and gas cutting tasks within specified timeframes while strictly adhering to safety protocols. Additionally, the welder will be expected to undertake fitting tasks assigned by the Maintenance Supervisor, maintain a clean and organized work area, and ensure compliance with safety regulations. Embracing the company's vision and actively participating in waste reduction efforts are also crucial aspects of this role. Key Responsibilities: Perform welding and gas cutting tasks within specified timeframes while adhering to safety protocols Execute fitting tasks assigned by the Maintenance Supervisor Maintain a clean and organized work area to hygiene standards Utilize correct techniques and specialized machinery for welding materials Inspect welded surfaces, structures, and components to identify errors Enforce strict safety regulations and monitor machinery usage and temperature Weld components in various positions and embrace the company's vision Actively participate in waste reduction and comply with company policies and procedures Support and promote the highest standards of hygiene within our company's Group Requirements Requirements: Key Technical Skills & Knowledge: Proficiency in various welding techniques, including TIG, MIG, arc, and oxy-fuel welding Familiarity with manual and mechanical welding techniques Ability to work independently Education/Qualification: Trade certificate in welding from a recognized institute Experience: Minimum of 3 years of experience as a welder

Job Title: R&D Engineer – Solar Outdoor Lights Location: [Chennai, Tamil Nadu] Company: Swaaadle Tech Pvt Ltd Department: Research & Development Employment Type: Full-Time ⸻ About Us At Swaaadle Tech Pvt Ltd, we are revolutionizing outdoor lighting with sustainable, solar-powered innovations. Our focus is on combining cutting-edge solar technology, durable materials, and smart energy systems to create world-class outdoor lighting solutions for urban, rural, and commercial applications. We are now seeking a dynamic R&D Engineer to lead the development of next-generation solar-powered outdoor lighting systems. ⸻ Role Overview The R&D Engineer will be responsible for researching, designing, prototyping, and validating new and innovative solar lighting products. The ideal candidate should be passionate about renewable energy, product innovation, and problem-solving, with a strong background in electrical, electronic, or renewable energy systems. ⸻ Key Responsibilities • New Product Development: Design and develop solar outdoor lighting products including solar bollards, streetlights, floodlights, and garden lights. • System Design & Integration: Develop complete systems including solar panels, MPPT charge controllers, batteries, LEDs, sensors (PIR/LDR), and enclosures. • Prototype Development: Build and test functional prototypes, iterate designs based on performance and cost analysis. • Technology Scouting: Stay updated on new technologies in solar PV, batteries, LED lighting, and IoT integration. • Product Optimization: Improve existing product lines for performance, reliability, manufacturability, and cost efficiency. • Testing & Validation: Conduct rigorous lab and field testing for luminance, autonomy, ingress protection (IP rating), thermal management, and structural durability. • Cross-functional Collaboration: Work closely with design, procurement, manufacturing, and quality teams to ensure product feasibility and scalability. • Documentation: Maintain thorough design documentation, BOMs, technical datasheets, and compliance reports (e.g., IEC, BIS, IP standards). • Vendor Coordination: Evaluate and collaborate with component suppliers and fabrication partners. ⸻ Required Qualifications • Bachelor’s or Master’s degree in Electrical, Electronics, Renewable Energy, or related engineering discipline. • 3–5 years of hands-on R&D experience in the solar or LED lighting domain. • Strong knowledge of solar photovoltaic systems, lithium/ LiFePO4 batteries, drivers, and thermal design. • Experience with embedded electronics or control systems (preferred: microcontrollers, sensors, timers, dimming protocols). • Familiarity with CAD tools for circuit and enclosure design (e.g., Altium, Eagle, SolidWorks, AutoCAD). • Working knowledge of relevant standards: IEC, BIS, RoHS, IP ratings, IK ratings, etc. ⸻ Preferred Skills • Exposure to smart/IoT-enabled lighting systems. • Understanding of life cycle analysis and sustainability in product development. • Prototyping and lab testing experience, including using oscilloscopes, multimeters, and lux meters. • Analytical thinker with strong problem-solving and debugging skills. ⸻ What We Offer • Opportunity to work on impactful renewable energy products. • A collaborative work culture focused on innovation and sustainability. • Competitive salary and performance-based incentives. • Professional growth opportunities through training and project leadership. Show more Show less