About The Role : 1. Preventive Maintenance: Plan preventive maintains in coordination with production team for Zero Breakdown and ensure 100% availability of machines and equipments. Drive technical changes in preventive maintenance by considering the breakdown maintenance. Verifying Preventive Maintenance check sheet on daily & weekly basis to ensure PM as per the plan Making machine /Equipment available for preventive maintenance as per plan. Verifying equipment inspection check sheets to identify abnormalities and taking the necessary action to overcome on that abnormalities by making required part available, installation of part & servicing of that equipment / machine. Doing MTBF (Mean Time Between Failure) & MTTR (Mean Time to Repair) analysis and taking counter measure actions Following and updating TBM calendar for timely basis inspection to increase the life of spare part and machine equipment. Should align all the plan according to Quality Systems Requirements Club visits of Manufacturere /AMC provider during PM schedule 2. Breakdown Maintenance Attending the major breakdown maintenance to understand the exact problem by doing why-why analysis for taking counter measures Guide for counter measure activity after breakdown analysis like, restoring the defective parts & removing the abnormalities, taking trail of equipment to ensure normal functioning of the equipment etc. Review and analyze the day to day breakdown report & providing guidance to team as and when required. Monthly review of break down report to understand the occurrence & root cause for reducing MTTR & increasing MTBF. Prepare / suggest counter measure to prevent occurrence of the same problem/abnormality & ensure Horizontally deployment of the same through maintenance engineer. Develop local service provider for small repair Job in accord with Purchase 3. Spares Management Identifying critical and non-critical spare parts & time to time updating the spare part list as per requirement. Management of Spare part for consumable spares, Wearing spares, electronic spares & electrical switch gears. Controlling consumption of consumable, spare part and stock items. Identification of Indigenous spare part for cost reduction 4. Cost Saving & Energy Conservation Reducing inventory and saving cost by converting imported to indigenous, refurbishing and reuse, developing local vendors & alternate sources, also by inventing newest technology useful for company Interacting with service engineers & doing market research to identify the low cost & long-life parts & materials to reduce the cost of material and parts. Reducing service cost by inhouse training of maintenance team. Identifying the power wastage & plan for energy conservation through reduction of energy consumption, reuse of energy, circuit modification, using natural resources & alternate energy efficient resources. 5. Modification & Upgradation Identifying absolute & old equipments, machinery, spare parts and upgrading them as per new technology Upgrade and improve absolute machines though system modification as per the customers requirements and KAIZEN. Modification of the machine for improving MTTR & MTBF through analysis of past breakdowns and week design identification. Providing advance tools like Bearing pooler, hydraulic Jack, hydraulic trollies, lifter, multi-function meters to reduce breakdown hours. Should have small team to perform all Kaizen ideas, suggestions safety requirements 6. Manpower Management & Training Prepare manpower plan & weekly shift schedule & Monitor shift wise manpower availability & take necessary actions in case of manpower shortage to avoid productivity loss. Identify & escalate disciplinary issues to eliminate further losses. Identification of technical & soft skill requirements to develop and train manpower accordingly. Training existing & new manpower on system implementation. 7. Vendor & Service Management Identify and develop compatible vendors for service solutions, Machine Upgradation, Tool Room requirements, electronic services and upgradation & coordinating with vendors on timely basis to resolve problems, changing parameters Taking follow-up for payment of vendor 8. System Implementation and documentation Implementing systems like QMS, IATF, TS, 5S, TPM, DWM. Preparing the documentation and presentation of the same as per Statutory Requirement, audit requirement, management review, value working. Reviewing and maintaining records of all maintenance related activities in SAP Comply and percolate the statutory reequipments like OSHAS, EMS, Safety, MSEB. Support in analysis of extracted IOT data and produce actionable insights for decision making Job Requirement The person should have experience of Min. 8 + yeear from Forging background. The person should be BE / Diploma - Electrical / Electronics.

Position : AC Technician Salary : 450USD - 550USD + Service charge Benefits : Food, accommodation, and medical benefits provided by the company. Requirements: - Must have 3 years experience in Reputed Resorts or Hotel as a AC technician Immediately joining Interested visit our office with original passport Swagatham Resource Management India Pvt Ltd No: 14 Sarathy Nagar 1st main road, Velachery, Chennai - 600 042 Time : 9am to 5pm [ Monday to Sunday] Contact HR - Swetha # 7305457998 / Sowmiya # 7845228682 ( Feel free to call us for any clarification )

Department : Estates Reporting To: Assistant Director - Estates Position Summary An HVAC engineer designs, implements, and maintains heating, ventilation, and air conditioning (HVAC) systems. They work with other professionals to ensure that the systems are: Energy-efficient, environmentally sustainable, and in line with the project goals and architectural plan. Duties / Responsibilities Roles and Responsibilities: HVAC Engineer / Supervisor Responsible for the maintenance, installation, and repair of heating, ventilation, and air conditioning (HVAC) systems and equipment. Their responsibilities include: Managing projects: Scheduling work, prioritizing jobs, and ensuring projects are completed on time Maintaining equipment: Inspecting equipment, performing repairs, and operating HVAC maintenance equipment Maintaining records: Keeping records of work orders, inventory, and expenditures Designing systems: Designing air flow control systems and modifications to existing systems Reviewing plans: Reviewing plans and specifications for new construction to ensure compatibility with existing equipment Providing technical assistance: Providing technical assistance to mechanics when requested Preparing reports: Preparing biweekly, monthly, quarterly, and annual reports Maintaining inventory: Maintaining inventory of parts and tools Training employees: Training employees on maintenance and repair procedures and standard safety practices Desired Qualification & Skills Bachelor's degree / Diploma in a relevant field. Prior experience of 3-5 Years in an educational setting is highly desirable. Working knowledge of MEP services, Engineering Technical specs & drawings It is an essential staff position hence those who are ready to stay on campus/ready to work in shifts need to apply.

The HVAC Technician plays a critical role in ensuring excellence in hvac technician operations. This position requires strong expertise in industry best practices, problem-solving abilities, and the capability to work collaboratively Required Candidate profile Responsibilities include managing key processes, analyzing performance metrics, and optimizing workflows to enhance efficiency. Additionally, the HVAC Technician must stay updated with the latest

URGENT HIRING // Car Evaluation Engineers (Field Job) Preferred Background: Service Advisor Body-Shop Advisor Travel Allowance Car Technician Car Mechanic Car Evaluator Inspection Engineer Car Surveyor Motor Claim Mandatory Requirements: Should have a valid Driving License for both two and four-wheeler. Should Know how to drive a Car (Manual & Automatic). Should have a personal two-wheeler. Should be ok with a Field Job. What drives us? Imagine: a single tap on your phone unlocks a world that transforms your entire car ownership journey, covering every milestone - from finding your perfect match to keeping it running smoothly, to selling it later. That's the future we're building at CARS24. Our mission is to ensure car ownership is stress-free. We want our customers to focus on the open road, not roadside worries. We're building a one-stop shop - a Super App for all their car needs, powered by technology, data science, and deep customer insights. We are already one of the largest Autotech companies in the world, but we are not stopping here. We aim to grow 10x in the next five years. What will you drive? Perform comprehensive vehicle inspections at customer sites, adhering to the highest standards of productivity and precision. Kick off daily operations with the first inspection by 9:00 AM sharp. Efficiently manage communications, ensuring all client interactions happen within specified timelines. Complete detailed reports and document findings in our proprietary system for all inspections conducted within allocated time slots. Navigate a daily route covering a 35-45 km radius, executing an average of 6 vehicle inspections per day. Who are we looking for? A motivated professional with a robust work ethic, ready to thrive in a dynamic, fast-paced environment. An owner of a two-wheeler with adeptness in operating manual and automatic vehicles. A holder of a valid drivers licence. Possess excellent observational, analytical, and reporting skills. Skilled in communication and interpersonal interactions, capable of delivering high-quality customer service. If this message catches your eye, consider it a green light from the cosmos.PS - Before you shift gears, make sure we're on the same track by connecting with a CARS24 insider. This could be a Launchpad to your destiny. Interested candidates can share their CV's at aayush.kharkwal@cars24.com or whatsapp at 9625316330 and can come directly for a face to face interview. .

SUMMARY Automobile Industry Experienced Car Inspector and Maintenance Technician We are seeking a skilled and experienced Car Inspector and Maintenance Technician with a minimum of 5 years of experience in the automobile industry. The ideal candidate will have a strong background in car inspection, repair, and maintenance, with a preference for those with GCC experience. Proficiency in Arabic language is required, and candidates must possess the necessary educational documents. Requirements Minimum of 5 years of experience in the automobile industry Proven experience in car inspection, repair, and maintenance GCC experience preferred Proficiency in Arabic language Educational documents Benefits Good Salary Free Accommodation 2 years employment visa flight ticket

Responsibilities: Perform repairs and maintenance on equipment Provide technical services during field service calls Ensure timely installation and commissioning of systems

SUMMARY Mechatronic Technician We are in search of a Mechatronic Technician to become a part of our team and undertake the role of maintaining, diagnosing, and fixing mechanical, electrical, and electronic systems in commercial vehicles. The perfect candidate will be responsible for ensuring the secure and effective operation of these vehicles by carrying out repairs on systems, components, and accessories, in accordance with manufacturer guidelines and safety procedures. Adherence to safety protocols and regulations is vital to guarantee vehicle safety and compliance. Furthermore, maintaining comprehensive records of maintenance, repairs, and inspections is a crucial aspect of this position. Key Responsibilities: Maintenance, diagnosis, and repair of mechanical, electrical, and electronic systems in commercial vehicles Carrying out repairs on commercial vehicle systems, components, and accessories following manufacturer guidelines and safety procedures Adhering to safety protocols and regulations to ensure vehicle safety and compliance Maintaining detailed records of maintenance, repairs, and inspections for commercial vehicles Requirements Requirements: Completion of vocational training as an Automotive Mechatronics Technician for Commercial Vehicles, Agricultural and Construction Machinery Mechatronics Technician (m/f/d), or a similar technical qualification Minimum of 2 years of hands-on experience in the repair and maintenance of commercial vehicles (excluding passenger vehicles) Strong problem-solving abilities Team player Class B driver's license Age below 40 years old

SUMMARY Job Title: Mechatronic Technician We are in search of a Mechatronic Technician to become a part of our team and undertake the responsibility of maintaining, diagnosing, and fixing mechanical, electrical, and electronic systems in commercial vehicles. The ideal candidate will ensure the secure and effective operation of these vehicles by performing repairs on systems, components, and accessories following manufacturer guidelines and safety procedures. Adherence to safety protocols and regulations is essential to guarantee vehicle safety and compliance. Furthermore, maintaining detailed records of maintenance, repairs, and inspections is a crucial aspect of this position. Key Responsibilities: Perform maintenance, diagnosis, and repair of mechanical, electrical, and electronic systems in commercial vehicles Execute repairs on commercial vehicle systems, components, and accessories in accordance with manufacturer guidelines and safety procedures Adhere to safety protocols and regulations to ensure vehicle safety and compliance Maintain comprehensive records of maintenance, repairs, and inspections for commercial vehicles Requirements Requirements: Completion of vocational training as an Automotive Mechatronics Technician for Commercial Vehicles, Agricultural and Construction Machinery Mechatronics Technician (m/f/d), or a similar technical qualification At least 2 years of practical experience in repairing and maintaining commercial vehicles (excluding passenger vehicles) Strong problem-solving abilities Ability to work effectively in a team Possession of a Class B driver's license Age below 40 years old

At Reliance Industries Limited, we are committed to driving innovation, excellence, and sustainability across diverse industries. As one of India’s largest and most dynamic conglomerates, we offer exciting career opportunities for individuals who are passionate, forward-thinking, and ready to contribute to our vision of building a brighter tomorrow. We are looking for talented professionals to join our team and be a part of our journey toward shaping the future. Job Description 1. Interact with customers on handset, other Mobility/Fixed devices related issues 2. Troubleshoot devices’ defects 3. Handle devices’ related queries 4. Record job entry in Customer Relationship Management portal 5. Upgrade software of devices. 6. Assemble / dismantle smartphones (unibody/duo body. 7. Repair handsets by changing screen, speaker, mic, camera etc. 8. Repair handsets by PCB swap, sub-PCBA/charging connecter replacement etc. 9. Deposit of cash collected through service. 10. Verify devices for exchange 11. Inspection of FTTx devices 12. Job role requires travel to various touch points as planned/as & when required. 13. Train/Support/Supervise extended service touch points at own stores and engage them in Device Service Delivery 14. Adhoc responsibilities include mandatory participation in activities rolled out from time to time viz. attending to the complaint calls pertaining to SLP devices & related support systems at own sites & sites, Out-calling due for recharge base; coaching set of Jio Associates and enhancing their participation & productivity (sell-out & activation. Skills 1. Customer focus 2. Good communication skills 3. Problem solving 4. Spares operations knowledge 5. Handset repairs knowledge of CRM systems Experience Required 0 - Years Education 10+2/ITI/Diploma/Certification in Device Care Location : Dahod Thanks & Regards, Hitanshi Arora Talent Acquisition Team Reliance Industries Limited 9510439221 arora.hitanshi@ril.com

Role & responsibilities : A Service Engineer provides technical support and maintenance services, troubleshooting, repairing, and maintaining equipment, while interacting with clients to address technical issues and ensure customer satisfaction . Preferred candidate profile: The Person Passed Out ITI, Electrical / Electronics /12th Pass with Electric / Electronics / Panel Repairing. The Person is required for Elect/ Electronics or Machine Tools. Perks and benefits: Official SIM + Annual Increment + Conveyance as per company norms. (if any) for Site Going.

Role & responsibilities Perform preventive and corrective maintenance on mechanical systems and equipment to ensure optimal performance. Troubleshoot, diagnose, and repair mechanical failures to minimize downtime and improve system reliability. Conduct regular inspections and condition monitoring to detect issues before they lead to breakdowns. Ensure all maintenance work adheres to safety standards and complies with regulatory requirements. Maintain accurate maintenance logs, manage spare parts inventory, and support cost-effective maintenance practices.

Aster DM HealthCare Global Centre is looking for Technician to join our dynamic team and embark on a rewarding career journey. Conducting electrocardiogram (EKG), phonocardiogram, echocardiogram, and stress tests by using electronic equipment. Ensuring cardiology patients are comfortable by answering any questions they have about the tests. Recording the results of cardiological tests and consulting with the physician on duty to schedule any follow-up tests. Assisting physicians during non-evasive cardiological procedures by monitoring the patients' heart rates and alerting the physicians to any readings outside normal ranges. Maintaining cardiological equipment and supplies with daily cleanings and adjustments. Recording supply inventory levels and restocking the supply storeroom accordingly. Troubleshooting problems with cardiological equipment and reporting any malfunctions to superiors. Staying up-to-date with cardiological developments by attending conferences and participating in research projects

Job Summary & Dimensions 1 . Installation and Setup : Unpacking, Install and configure industrial vending machines at client sites. Ensure all machines are set up according to company standards and client specifications. 2 . Maintenance and Repair: Keep a track of Machines installed that are under warranty and past warranty. Attend Service requests on short notice onsite to ensure seamless working and operations of the machines. Perform routine maintenance to ensure machines are operating efficiently. Diagnose and repair any mechanical or software issues that arise. Respond promptly to service requests and minimize machine downtime. 3. Remote Client Support: Attend phone calls while the customers are onsite using the machines. Provide technical support and training to clients on the usage and maintenance of vending machines. Address client concerns and troubleshoot issues both on-site and remotely. 4. Inventory Management: Monitor and manage spare parts inventory to ensure availability for maintenance and repairs. Coordinate with the purchase team for timely procurement of parts. 5. Reporting and Documentation: Enter Call Logs, Service requests, report problems, and any updated information relevant to customer in Salesforce. Maintain detailed service records and logs of maintenance activities. Provide regular reports on machine performance and service activities. B. MINIMUM REQUIREMENTS 1. Bachelors in Engineering Mechanical / Electrical / Electronics / Computer Science 2. 5-7 years experience as Service Engineer / Technician in Machine tools /relevant industry with Vending Machines 3 . Self-assured pro-active personality who can work independently and flexibly. 4 . Excellent computer skills. 5. Good communicator with strong interpersonal skills 6 . Willingness to travel country on business trips lasting several days - 50% Travel 7. Fluency in English, Hindi, Marathi 8 . Self Transport with valid driving Licence in India.

Skill required: IX Intelligent Asset Management Operations - Asset Data Management Designation: Asset Performance Mgmt Senior Analyst Qualifications: Any Graduation Years of Experience: 5 to 8 years What would you do? Role:I&E Design Engineer The Instrumentation and Electrical Designs Engineer is a member of Client's Facilities Designs Engineering team providing instrumentation, controls, and electrical designs support to Client s Refining and Liquified Natural Gas (LNG) assets. This role is responsible for supporting the troubleshooting, analysis and development of I&E engineering solutions for Clients complex process facilities. The I&E Designs Engineering team provides remote technical support for operations, turnaround scope development, and projects. What are we looking for? Bachelor's degree in instrumentation or electrical engineering (B.E./B.Tech.) from a deemed/recognized (AICTE) universityMinimum of 3-10 years relevant experience performing I&E Reliability Engineering in an Oil & Gas operating environmentKnowledge of Safety Instrumented Functions Knowledge of refinery and LNG process technologies will be highly regarded Roles and Responsibilities: Provide instrumentation, controls, and electrical engineering support process units within Client's complex process facilities. This will require collaboration with Operations, Maintenance and Technical functions within Client's assets. Leverage expertise and knowledge of electrical power systems and codes, instrumentation and control design, safety instrumented systems, process control systems, field instrument selection and sizing, equipment procurement, field construction and repair practices, process safety information, management of change work process and process control and monitoring to coach and develop team. Support the management of change process for instrumentation, controls and electrical design packages and associated changes. Utilize Client and Industry Engineering Standards for Safety in Designs Support the design, troubleshooting, analysis and installation of distributed control systems instrumentation, safety instrumented systems (SIS), analyzers, electrical power distribution systems, rotating equipment control and monitoring systems, PLC control & instruments, HART instruments, field measurement instruments, and other oil & gas process technology equipment. Provide active remote support working with Operations and other technical teams to scope instrumentation and electrical repairs and troubleshoot issues in process plants. Support implementation of solutions through Routine Maintenance, Turnaround execution and project construction and startup. Develop and manage Engineering Work Orders for projects including instrumentation and electrical equipment repair, equipment replacement and upgrades, and support for large complex projects and turnarounds. Develop purchase specifications for engineered instrumentation and electrical equipment that ensures the equipment meets company and industry standards and manage the technical fabrication and factory acceptance testing requirements for procuring equipment. Qualifications Any Graduation

JPC REQ--- Sales & Service.---0-2 YEARS ---CHENNAI & BANGALORE--PERM---21K PM---Prafful Singh ---TOSHBRO MEDICALS----Vikas

**Position Title:** Service Engineer (Preferred North India candidate) **Location: ** Chandigarh (PAN INDIA) **Roles & Requirement 1-5 years Experience Segment: Cardiology, Neurology, Urology Products: ECG, MPM, TMT, EEG, EMG, PSG, Holmium Laser, Thulium Fiber Laser and Morcellator Diploma/Degree in Biomedical or Electronics Good Experience in servicing, installation, repairing and maintenance in medical devices/equipment's. **Application Process: ** Interested candidates should submit their resume to recruitment@allengersglobal.com or WhatsApp: 8288806351 Only shortlisted candidates will be contacted for further consideration.

SUMMARY Electrician Job Opportunity About the Company: Our client is a professional staffing and recruitment agency dedicated to bringing skilled professionals from non-EU countries to Germany. We specialize in ensuring that these professionals receive full German vocational recognition and acquire the necessary language skills to excel in the German workforce. Our program serves as the bridge to overcome all barriers, facilitating the integration of non-EU professionals into the German job market. Experience: We are seeking individuals with two years or more of experience as Electricians, including Industrial electricians, Housing electricians, or Residential electricians. Job Responsibilities: Install, maintain, and repair industrial electrical systems for machinery and equipment. Set up wiring, circuit breakers, panels, and lighting systems. Perform regular inspections and preventive maintenance. Diagnose and repair electrical faults using specialized testing equipment. Ensure all electrical work complies with German electrical codes and safety standards. Follow safety guidelines and protocols in the workplace. Maintain detailed records of repairs, maintenance, and inspections. Report safety concerns or system inefficiencies to management. Collaborate with engineers, technicians, and other team members for project execution. Requirements ITI or Diploma in Electrical Engineering (B.Tech graduates are NOT eligible). Minimum of 2-5 years of industrial electrical work experience. Age Limit: 18-35 years Experience with high-voltage systems and automated machinery. Ability to read and interpret electrical schematics, blueprints, and PLCs. Familiarity with German electrical regulations is a plus. Valid electrician license (if required in Germany). Proficiency in English or German (preferred). Strong troubleshooting and problem-solving skills. Willingness to relocate and work in Germany. Benefits Attractive Salary & Benefits: Competitive pay and excellent benefits. Career Growth: Long-term opportunities with renowned German companies. International Experience: Gain valuable experience in a dynamic and high-tech industry. Job Security: Stable employment with ongoing professional development opportunities. Cutting-Edge Work: Work with high-voltage systems and automated machinery.

SUMMARY Aluminum Foreman Job Summary: We are seeking an experienced Aluminum Foreman to oversee and coordinate the daily activities of our aluminum fabrication team. The ideal candidate will ensure adherence to safety regulations and quality standards, plan work assignments, provide training to team members, manage inventory, and communicate effectively with project managers and clients. Responsibilities: 1. Supervise and coordinate daily activities of the aluminum fabrication team. 2. Ensure compliance with safety regulations and quality standards in all operations. 3. Plan and schedule work assignments to optimize productivity and efficiency. 4. Conduct regular inspections of work sites and equipment to ensure proper functioning. 5. Provide training and mentorship to team members to enhance their skills and performance. 6. Manage inventory and order materials as needed for ongoing projects. 7. Communicate effectively with project managers and clients regarding project progress. 8. Resolve any issues or conflicts that arise during the fabrication and installation processes. 9. Maintain accurate records of work performed and materials used. 10. Implement process improvements to enhance operational efficiency Requirements Proficient in aluminum fabrication and installation techniques. 5+ years of working experience as an ALUMINUM FOREMAN Strong leadership and team management skills. Excellent problem-solving and analytical abilities. Knowledge of safety regulations and quality control processes. Effective communication and interpersonal skills. Ability to read and interpret technical drawings and specifications. Familiarity with project management software and tools. Strong organizational and time management skills. Benefits 2 years employment visa Good Salary Accommodation flight ticket

As an Engineer for Mechanical Maintenance in our Pipe Plant at Jhagadia, you will be responsible for overseeing all mechanical maintenance operations within the plant. This includes ensuring that all machinery and equipment are maintained and functioning optimally, and that all maintenance activities are carried out in accordance with established safety standards and procedures. Plan, schedule, and execute preventive maintenance programs for all mechanical systems, including pumps, compressors, motors, conveyors,Troubleshoot and repair mechanical equipment failures promptly to minimize downtime. Conduct root cause analysis on mechanical failures and recommend corrective actions. Perform regular inspections of machinery to detect and rectify mechanical issues before they lead to equipment breakdowns. Oversee the installation, testing, and commissioning of new mechanical equipment. Identify and implement improvements to mechanical systems to enhance performance, energy efficiency, and safety. Maintain detailed records of maintenance activities, repairs, and inspections. Prepare and submit reports on equipment performance, maintenance costs, and downtime analysis.Provide technical guidance and training to junior maintenance staff on mechanical maintenance techniques and procedures.Ensure that all mechanical systems comply with health, safety, and environmental regulations. Ensure the availability of spare parts for critical machinery. Manage inventory of mechanical parts, tools, and equipment.

Roles and Responsibilities Install, maintain, repair elevators and moving walkways to ensure smooth operation. Conduct routine maintenance tasks such as lubrication, adjustment, and inspections to prevent breakdowns. Troubleshoot issues with elevator systems using fault finding techniques and technical knowledge. Collaborate with other technicians to resolve complex problems or complete projects efficiently. Maintain accurate records of work performed, including repairs made and parts used.

Job Responsibilities: 1. On-Site Maintenance and Repairs : Conduct regular inspections, maintenance, and repairs on a wide range of oil and gas equipment, including fuel dispensers and other types of equipment at retail outstations like Petrol pumps, to ensure their optimal performance and minimize downtime. 2. Troubleshooting : Diagnosing and troubleshooting complex technical issues that may arise during the operation of equipment, utilizing a deep understanding of the specific systems and processes involved in our industry. 3. Installation and Commissioning : Assisting with the installation, configuration, and commissioning of new equipment (fuel dispensers and other types of equipment at retail outstations like Petrol pumps), ensuring that it operates according to specified guidelines and safety standards. 4. Customer Support: Providing technical support and guidance to clients or customers, addressing their concerns, and offering solutions to maximize the efficiency and safety of their operations. 5. Safety Compliance : Ensuring that all work performed adheres to industry safety standards and regulations, and identifying potential safety hazards or risks to prevent accidents and promote a secure working environment. 6. Documentation and Reporting: Maintaining detailed records of service activities, including maintenance schedules, repairs performed, and any modifications made, and providing comprehensive reports to supervisors or management as required. 7. Training and Knowledge Sharing: Attending training sessions or workshops to enhance the understanding of equipment operations, maintenance procedures, and safety protocols. 8. Field Operations Coordination : Collaborating with other team members, including engineers, technicians, and project managers, to coordinate field operations, prioritize tasks, and ensure timely and effective resolution of technical issues. 9. Adherence to Company Policies : Following company policies and protocols, including those related to quality control, health, safety, and environmental protection, to uphold the organization's reputation and maintain high operational standards. Requirements: 1. Diploma, BTech (Mechanical or Electrical or Electronics or Instrumentation) with Fresher. 2. Ability to work in flexible timings and to adapt to changing work schedules. 3. Basic Knowledge of computers (E-Mail handling, MS Office, Excel, etc.) 4. Must have their own bike.

Brief Summary The primary responsibility of this role is to handle the repair of both sold and unsold pieces of jewellery received from the Finished Goods Department. The Repairs Executive will ensure that all repairs are carried out efficiently, accurately, and in accordance with company standards. The ideal candidate should have 1-2 years of experience in jewellery manufacturing or repair. Brief Job Description (just an indicative list and not limited to the following) 1. Receive sold and unsold jewellery pieces from the Finished Goods Department for repair. 2. Inspect and assess the condition of each piece to determine the necessary repairs. 3. Perform repairs on jewellery items, including but not limited to cleaning, polishing, stone setting, resizing, and re-plating, using appropriate tools and techniques. 4. Ensure that repairs are completed within the specified timeframe and meet the quality standards set by the company. 5. Maintain accurate records of all repairs, including details of the work performed, materials used, and any additional charges. 6. Communicate with the Customer Order and Repairs Manager regarding the status of stock repairs, providing regular updates on progress and completion. 7. Coordinate with other departments, such as the Finished Goods Department and the Quality Assurance team, to resolve any issues or concerns related to repairs. 8. Assist in the organization and management of repair inventory, ensuring that necessary tools and supplies are available for the repair process. 9. Adhere to all safety procedures and guidelines while handling jewellery pieces and using repair equipment. 10. Provide excellent customer service by addressing customer inquiries and concerns regarding repairs in a timely and professional manner. Skill Required 1. 1-2 years of experience in jewellery manufacturing or repair. 2. Strong knowledge of jewellery repair techniques, tools, and materials. 3. Attention to detail and excellent hand-eye coordination for delicate repair work. 4. Ability to work independently and efficiently in a fast-paced environment. 5. Good communication skills to effectively interact with team members and customers. 6. Basic computer skills for maintaining repair records and communicating via email. 7. Strong problem-solving skills and the ability to handle multiple tasks simultaneously. Thanks & Regards, Ankita Ghadigaonkar Assistant Manager Human Resources M: 88283 00920 E: ankita.ghadigaonkar@orra.co.in A: HOUSE OF ORRA, Plot B26, off New Link Road, Andheri (W), Mumbai 400053

Position - Technician / Sr. Technician / Technical Assistant / Sr. Technical Assistant Mechanical Assembly Checks to test as per document Rework of Mechanical assembly parts Integration of assembly parts Support Lean and Health and Safety Initiatives. Provide support and feedback to quality and manufacturing engineering Fabricate or modify parts, using shop equipment. Verify dimensions and clearances of parts to ensure conformance to blueprint specifications, using instruments, such as micro meters, callipers, and height gauges.

Responsibility: Plan the project, distribute and monitor the performance of installation engineers - Supervise and control the tasks of new installation and modernizations Assembly - Supervise the execution the WIP jobs, materials, assemblies and documentation. Ensure Process implementation and improvements (Pull, Site readiness, Audits etc) Regular follow up on site updates and WIPs. Maintain a communication channel with Customers for resolving and closing the issues. Impart training and ensure availability of trained resources (direct and subcontractor) through planning. Lead and train the installation and subcontractor team - Work proactively to avoid fire fighting and control cycle time. Subcontractor development and ensure they follow the Company rules related to Safety and Quality