1023 Oil Jobs - Page 25

QC MANAGER-ARAMCO/NON- ARAMCO University Degree in (Mechanical) Engineering or similar and minimum Ten (10) or Engineering Diploma and minimum Twelve (12) years of direct work experience in Inspection & Testing. Of which, seven (7) or more years experience shall be in managing/supervision of construction QC activities related to the Contract scope of WORK. International certification as a Quality Auditor, or equivalent, for ISO 9001: 2015. Ability to interpret, audit, apply and exercise judgment on project QMS requirements and engineering standards.

WELDING INSPECTOR (CSWIP 3.1 /AWS CWI)-ARAMCO/NON- ARAMCO University Degree in an (Mechanical) Engineering or similar and minimum Six (6) or Engineering Diploma and minimum five (5) years of direct work experience in Inspection & Testing. Of which, three (3) or more years experience shall be in performing welding inspection & testing activities related to the Contract scope of WORK (Tanks, pressure vessels, etc). Current Certification of CSWIP 3.1 / AWS-CWI and demonstration of through knowledge of applicable Codes & Standards. Also demonstrate knowledge & understanding of ISO 9001: 2015 requirements and implementation.

QC INSPECTOR (API 653 CERTIFIED INSPECTOR)-ARAMCO University Degree in an (Mechanical) Engineering or similar and minimum Six (6) or Engineering Diploma and minimum five (5) years of direct work experience in Inspection & Testing. Of which, three (3) or more years experience shall be in performing mechanical inspection & testing activities related to the Contract scope of WORK (Tanks, pressure vessels, etc). Current Certification of API 653 and demonstration of through knowledge of applicable Codes & Standards. Also demonstrate knowledge & understanding of ISO 9001: 2015 requirements and implementation.

Start work with take 5. Checking of all press machine & its function. Hydro lick oil Level & its Leakage. Top force seal checking & condition. Reliving operator Observation & checking at your side. conditions of Previous material (Quality) & try to resolve the Running issue (Thickness Variation, Slurry Leakage, Operation related issue). Checking to trolley condition i.e. (trolleys condition will be ok). Proper training given to press Helper (safety related, press machine related Awareness etc). Good Coordination with inter-departments Providing necessary& safety related training to Press Machine Helper. Basic Knowledge on TPM Implementation of safety protocols Maintaining Shopfloor 5S. Compliances of Internal and external audits Knowledge on ISO/IMS standards

Role & responsibilities Literature survey • Formulation of lubricating oils, metal working fluids, industrial Speciality oils • Evaluation of raw materials • Testing of products as per ASTM, IP, ISI, DIN standards • Analysis of technical samples of products received from customers during various stages of usage and providing appropriate feedback to them. • Analysis of water samples to find its suitability for use with emulsifiable products like soluble cutting oils covering tests like ph, conductivity, total alkalinity, hardness, chloride, sulphate, T.D.S, c.o.d., microbial growth etc. • Performing the inspection and testing of regular production batches as per specifications. In case of non- conformance, finding the cause for failure and taking corrective actions. Raw materials, intermediates products and packaging materials also tested for quality. • Evaluation of various competitor samples for comparisons and 5research purpose. • To carry out, maintain and review calibration schedules of lab Equipments. • Performance of product developed as per ASTM, IP, ISI. • Scaling up from laboratory scale to pilot plant for Greases. • Preparation of standard specifications for quality check • Preparation of product data sheet • Preparation of material safety data sheet • Transfer of technology to production • Conduct successful trial at customers end • Modification in formulation on basis of experience during trials • Sourcing of raw materials • Substitutes / alternate raw materials in formulation • Preparation of manufacturing procedure for production with all details of controls such as temperature, reaction time, sequence of addition of raw materials, and intermediate control test (acid number, viscosity, water content, ph etc) • Preparation of specifications of raw materials used in formulations • Well versed with ISO 9000:2000 procedures and requirements Preferred candidate profile

GlaxoSmithKline Pharmaceuticals Limited is looking for Senior Principal Engineer to join our dynamic team and embark on a rewarding career journey Lead the design, development, and implementation of complex engineering projects, ensuring that they are completed on time, within budget, and to the required quality standards Provide technical guidance and mentorship to engineers and other technical staff, helping to build a high-performing team and supporting the development of individual team members Collaborate with other departments, including product management, operations, and quality assurance, to ensure that engineering projects align with the company's overall strategy and goals Evaluate and select technologies and tools for use in engineering projects, taking into account factors such as scalability, security, and performance Oversee the testing and deployment of engineering projects, ensuring that they are thoroughly tested and meet all required specifications before release Monitor and evaluate the performance of engineering projects, identifying opportunities for improvement and making recommendations for future enhancements Experience leading a team of engineers, with strong leadership and management skills Excellent communication and interpersonal skills Skills Application Programming Interface (API) Security, Data Engineering, Data Integration, RESTful API Design, Software Development Life Cycle (SDLC), System Designs, Version Control, Web Development

1. Ensure quality of installation at Project Sites. 2. Effectively mobilize available resources and strive for on time project completion. 3. Equipment Testing for performance with reference to design and specifications. 4. Ensure smooth handing-over projects, complete with all documentation, drawings, manuals, measurements, test reports, test certificates etc Qualifications: BE in Electrical Engg

Work with Us. Change the Word. At AECOM, we're deivering a better word. Whether improving your commute, keeping the ights on, providing access to cean water, or transforming skyines, our work heps peope and communities thrive. We are the word's trusted infrastructure consuting firm, partnering with cients to sove the words most compex chaenges and buid egacies for future generations. There has never been a better time to be at AECOM. With acceerating infrastructure investment wordwide, our services are in great demand. We invite you to bring your bod ideas and big dreams and become part of a goba team of over 50,000 panners, designers, engineers, scientists, digita innovators, program and construction managers and other professionas deivering projects that create a positive and tangibe impact around the word. We're one goba team driven by our common purpose to deiver a better word. Join us. Job Summary AECOM is seeking a highy skied FAB Expert Space Management to ead the panning, aocation, and optimization of space within semiconductor fabrication (FAB) faciities. This roe invoves ensuring efficient utiization of ceanroom areas, equipment ayouts, materia fow, and support spaces whie maintaining compiance with industry standards. The idea candidate wi work cosey with process engineers, architects, and faciity panners to deveop ayouts that enhance operationa efficiency, safety, and sustainabiity. Responsibiities: Pant Layout, Space Panning & Layout Optimization: Deveop overa pant ayout for semi-conductor projects ensuring compiance to the statutory requirements. Deveop and optimize space ayouts for ceanrooms, sub-fabs, utiities, and supporting infrastructure ensuring compiance to O&M and EHS requirements. Ensure efficient aocation of equipment, process toos, and materia fow pathways. Maximize space utiization whie maintaining fexibiity for future expansions or modifications. Faciity Coordination & Design Integration: Coordinate with process engineers to aign space requirements with production needs. Ensure proper separation of process zones, hazardous materia areas, and cean storage spaces. Coaborate with process, civi, architects, structura engineers, and MEP teams to aign space panning with faciity design. Coaborate with the MEPF teams to ensure compiance with ceanroom cassification requirements (ISO 14644) and contamination contro strategies. Pan for utiities, access corridors, and ogistics fow to minimize production disruptions. Faciitate ergonomic and accessibiity considerations for operators and maintenance personne. Cash Coordination for interference free design Reguatory Compiance & Safety Considerations: Ensure compiance with oca authority reguations, fire codes, and industry safety standards. Address environmenta and sustainabiity considerations, incuding energy efficiency and waste management. Work with permitting agencies to secure approvas for space-reated modifications. Project Documentation: Deveop Pant Layout, space panning reports, GA drawings, and 3D modes to communicate ayout designs. Assist in feasibiity studies and cost-benefit anaysis for space utiization strategies. Preparation and updation of pant / system ayouts for AHJ approvas Support commissioning and vaidation of space ayouts before faciity operations begin. Quaifications Bacheors or Masters degree in Chemica Engineering, Architecture, Industria Engineering, Mechanica Engineering, Faciity Panning, or a reated fied. 15 + years of experience in FAB faciity panning, space management, or semiconductor manufacturing environments. Hands-on experience in ceanroom ayout panning, materia handing systems, and factory automation. Additiona Information Soft Skis: Strong anaytica and probem-soving abiities. Exceent communication and coordination skis with cross-functiona teams. Abiity to manage mutipe projects and adapt to fast-paced environments. Technica Skis: Experience in greenfied and brownfied FAB projects. Knowedge of sustainabiity best practices in semiconductor manufacturing. Famiiarity with oca authority reguations for space panning and faciity approvas. Proficiency in AutoCAD, Revit, BIM, and other faciity panning toos. Understanding of buk gases, speciaty gases, chemicas, ceanroom cassifications, HVAC requirements, contamination contro and MEP requirements. Famiiarity with Lean manufacturing, Six Sigma, and process optimization techniques.

Work with Us. Change the Word. At AECOM, we're deivering a better word. Whether improving your commute, keeping the ights on, providing access to cean water, or transforming skyines, our work heps peope and communities thrive. We are the word's trusted infrastructure consuting firm, partnering with cients to sove the word’s most compex chaenges and buid egacies for future generations. There has never been a better time to be at AECOM. With acceerating infrastructure investment wordwide, our services are in great demand. We invite you to bring your bod ideas and big dreams and become part of a goba team of over 50,000 panners, designers, engineers, scientists, digita innovators, program and construction managers and other professionas deivering projects that create a positive and tangibe impact around the word. We're one goba team driven by our common purpose to deiver a better word. Join us. Roe Description: The Senior Associate Director/Deputy Head of Rais wi be responsibe for supporting the Head of rais and EC senior management in deivery and operations and hep them to buid up and grow the headcount of our India team. This incudes interviewing seecting and onboarding the right candidates. Lead the team supporting our Rai projects. This is a senior roe within AECOM which requires strong technica understanding of the Rai sector. Great eadership abiity and the abiity to gain the confidence and trust of major cients. The abiity to identify the most appropriate soutions to a wide range of projects, incuding promoting innovative ideas is an important requirement of the roe. Roes and Responsibiities: Deveops technica soutions to a wide range of difficut probems. Works under ony genera direction. Independenty determines and deveops approach to soutions. Experience in Rai Market – overa. Experience in UK, UAE, US, Canada, Midde East (preferred). Shoud be knowedgeabe in rai design services, associated reguations and technica standards. Capabe of working on as own initiative, as an overa responsibiity and accountabiity for assigned work. Must be a team payer and possess strong interpersona skis. Must be abe to make decisions, act on own initiative and operate in a pro-active way. Maintains affiiation with professiona societies to keep abreast of current technoogies. Coaborating with other senior management to formuate strategy for Business Continuity and requirements. Enhance the communication channe between businesses, Support functions and management. Impementation of important poicy and processes. Interface between Support functions and Business. Impement efficient process and mechanism for streamine working between businesses and support functions. Oversee the adoption of new technoogy soutions in the businesses. Reguar reporting to senior management about the performance and issues and suggest improvements. : Abiity to buid consensus and reationship among business eads, management and empoyees. Exceent communication and infuencing ski. Good in Business Negotiation and peope management. A strong manageria acumen and famiiarity with business administration principes. Prioritizing and deegating task abiity. Abe to introduce new processes and improve existing processes and get buy in from a. Must have eadership skis/abiity. Roes required peope with good stress toerance. Abiity to get the job done. Quaifications Quaifications: Master of Engineering degree (or equivaent education) in an appropriate engineering discipine from an accredited coege or university. Appicants must have more than 15 years of experience in Civi Engineering, UK/Midde East/US/experience, which woud be desirabe but are not essentia. Abe to see the “bigger picture” and take a birds-eye view of projects Abiity to work to deadines and under pressure. Accountabiity for assigned work. Accuracy & precision of work. Wiingness to earn and deveop. Strong probem-soving skis Enthusiastic and Sef-motivated. Additiona Information

Designation- Mechanical Technician Industry - Oil & Gas Industry Qualification - ITI, Diploma (only) Experience - Freshers 0 to 1 years Location - Dubai (Abuthabi) Salary - 30000 Rs Employment Visa Contact HR Keerthana - 9566533925 Required Candidate profile Candidates should compleate Diploma Mechanical He Should have Mechanical background Min 0 to 1 years Experience Please send your resume whatsapp to - 9566533925

SUMMARY SAP MM (Material Management) Developer Location: Bangalore(Onsite) Experience Range: 2+ Years Must-have: The candidate should have 2 years of relevant experience in SAP MM Development Job Description We are seeking an Application Developer with expertise in SAP MM (Material Management) to join our team. In this role, you will be responsible for designing, constructing, and configuring applications to meet business process and application requirements. You will collaborate with team members to understand project needs, develop application features, and ensure that the solutions align with business objectives. Additionally, you will be involved in testing and troubleshooting to enhance application performance and user experience, while continuously seeking opportunities for innovation and improvement in application development. Roles & Responsibilities Independently perform and become a Subject Matter Expert (SME). Actively participate and contribute to team discussions. Provide solutions to work-related problems. Assist in documenting application processes and workflows. Engage in code reviews to ensure quality and adherence to best practices. Professional & Technical Skills Must-Have Skills: Proficiency in SAP MM Materials Management. Strong understanding of application development methodologies. Experience with the integration of SAP MM with other modules. Familiarity with data management and reporting tools. Ability to troubleshoot and resolve application issues efficiently. Additional Information The candidate should have a minimum of 2 years of experience in SAP MM Materials Management. This position is based at our Bangalore office. A 15-year full-time education is required.

Role Will Include, But Not Be Limited To Model building and drawings of building services elements for Electrical services like lighting power, earthing and lightning protection systems, schematics, schedules, etc 3D model of physical substation in Microstation/AutoCAD/Revit and preparing 2D/3D drawings Basic electrical design calculations, QA/QC procedures Attention to quality and technical correctness Smooth coordination with other Mechanical, Structural and Architectural services Work within time limits to complete deliverables on time, Candidate Specification Have ITI or Diploma in Electrical & Electronics Engineering Must have working experience in Electrical modelling for building services using Microstation/AutoCAD/Revit as a software, Must have experience in substation projects/Oil & Gas projects Experience in MicroStation,AutoCAD and Revitis must Experience in western power Substation projects will be preferred Be familiar with preparation of layout drawings and schematic diagrams for electrical services Exposure to British & GCC standards Have good written & verbal communication skills Be able to work without the help of mark-ups Exposure to platforms like BIM360 or Project wise preferred Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute, Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments We embrace agility, flexibility and trust, Location(s): Bengaluru, KA, IN Noida, UP, IN Mumbai, MH, IN Contract Type: Permanent Work Pattern: Full Time Market: Energy Discipline: Electrical Job Ref: 8961 Recruiter Contact: Abhimanyu M S

Role Will Include, But Not Be Limited To Model building and drawings of building services elements for Electrical services like lighting power, earthing and lightning protection systems, schematics, schedules, etc 3D model of physical substation in Microstation/AutoCAD/Revit and preparing 2D/3D drawings Basic electrical design calculations, QA/QC procedures Attention to quality and technical correctness Smooth coordination with other Mechanical, Structural and Architectural services Work within time limits to complete deliverables on time, Candidate Specification Have ITI or Diploma in Electrical & Electronics Engineering Must have working experience in Electrical modelling for building services using Microstation/AutoCAD/Revit as a software, Must have experience in substation projects/Oil & Gas projects Experience in MicroStation,AutoCAD and Revitis must Experience in western power Substation projects will be preferred Be familiar with preparation of layout drawings and schematic diagrams for electrical services Exposure to British & GCC standards Have good written & verbal communication skills Be able to work without the help of mark-ups Exposure to platforms like BIM360 or Project wise preferred Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute, Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments We embrace agility, flexibility and trust, Location(s): Bengaluru, KA, IN Noida, UP, IN Mumbai, MH, IN Contract Type: Permanent Work Pattern: Full Time Market: Energy Discipline: Electrical Job Ref: 8961 Recruiter Contact: Abhimanyu M S

Job Responsibilities : Lead Technical Services department, effective operational excellence and contribute meaningfully to the Technical functionsof the company; Support safe and reliable process operations by carrying out trouble shooting , capacity enhancement , operations flexibility studies using best in class techniques / simulations & Process SafetyManagement (PSM), Job Accountabilities HSE: Lead teams for risk assessment, review of HAZOP recommendations and apprise Head CTS, conduct ReSOP observations in the field and correct behavioural environment Conduct in house QRA & review QRA conducted by external agency, MIS & Regulatory compliance: Coordination & Preparation of DGH & other regulatory reports in a timely manner, Collate data of oil / gas production from wells & extend the required support for improvement measures, Collate data of processes at onshore terminal for problem solving & debottlenecking, Management of Change MOC : Coordinate & Guide for MOC at site including review of proposals; conductingHAZOP ; reviewing design specification / material specifications of new systems & pipelines; completing MOC close out cycle in coordination with site teams, Process Engineering :Extending the required support for conceptualise engineering for minorprojects, Development/ Review of P&ID, Coordinate CoEteams on sharing of technical information with respect to design / process data & trends etc; Set up new experiments / review of Lab Results, Audit Compliances: Participating in audit process ; Execute audit recommendations; Prepare Audit close out reports, Technical Support: Coordinate team for simulation in HYSIS, PIPESIM, OLGA PHAST & Other Simulation Packages Education Requirement : Bachelor Degree in Chemical / Petroleum Engineering Master Degree in engineering / specialised degree in E&P related subject is an added advantage, Experience Requirement : Minimum 10 Years of experience out of which 5 years in E&P with exposure to onshore & offshore operations, Skills & Competencies : Should be able to coordinate a team to provide technical support for On-shore & Off-shore operations,

Role Will Include, But Not Be Limited To Model building and drawings of building services elements for Electrical services like lighting power, earthing and lightning protection systems, schematics, schedules, etc 3D model of physical substation in Microstation/AutoCAD/Revit and preparing 2D/3D drawings Basic electrical design calculations, QA/QC procedures Attention to quality and technical correctness Smooth coordination with other Mechanical, Structural and Architectural services Work within time limits to complete deliverables on time, Candidate Specification Have ITI or Diploma in Electrical & Electronics Engineering Must have working experience in Electrical modelling for building services using Microstation/AutoCAD/Revit as a software, Must have experience in substation projects/Oil & Gas projects Experience in MicroStation,AutoCAD and Revitis must Experience in western power Substation projects will be preferred Be familiar with preparation of layout drawings and schematic diagrams for electrical services Exposure to British & GCC standards Have good written & verbal communication skills Be able to work without the help of mark-ups Exposure to platforms like BIM360 or Project wise preferred Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute, Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments We embrace agility, flexibility and trust, Location(s): Bengaluru, KA, IN Noida, UP, IN Mumbai, MH, IN Contract Type: Permanent Work Pattern: Full Time Market: Energy Discipline: Electrical Job Ref: 8961 Recruiter Contact: Abhimanyu M S

Support, coordinate, and contribute to different and new Regulatory Affairs projects and Regulatory IT systems across the regions. Contributes to training and training documentation creation of new regulatory systems and newcomer act as SME (Subject Matter Expert) or Champion Coordinate and support Country Audit & Inspection readiness. Define/confirm regional reg. approaches for upcoming local product changes. Engage in compliance and data governance and quality initiatives, focusing on data cleansing and monitoring processes to support automation and AI. Support update management through document localization (RIMS local repository). Collaborate with cross-functional teams to define regional regulatory strategies for product changes. Serve as internal International Regulatory Affairs point of contact for TA and RQS operations. Performs a range of routine or even non-routine assignments to solve problems of low to moderate complexity that require working knowledge and experience in own job discipline. Led efforts in VV processes and regulatory requirements, focusing on compliance and data governance. Monitors and create reports on compliance with the defined data quality standards. Who You are: 6 or more years of experience in regulatory affairs field. Know-how in regulatory and understanding of regulatory affairs business processes. Ability to execute assigned task, time management skills & proactive communication approach. Drive process excellence, ensure compliance. Ability to effectively design, prioritize, keep information confidential, escalate issues, manage time effectively, gain alignment and successfully execute processes. Gain visibility in duplicating or contradicting processes to eliminate or adapt them as needed to increase quality & speed execution. Ability to focus on implementing measurements and taking corrective actions on processes management. Ability to interact, acquire know-how, emphasize team learning & plan apprenticeships with experienced colleagues. To create clear, easy-to-follow work schedules with specific requirements and deadlines to maintain high standards with optimal efficiency. Be comfortable, understand how to assess & evaluate the impact of change within a team/organization. Effectively prioritizes competing tasks in a fast-paced and dynamic environment. High proficiency in English. Effective time management skills to multi-task several initiatives with demonstrated ability to achieve success.

Skill - Qual+ Quant (Energy / Infrastructure / Healthcare / TMT) Responsibilities- Supporting our clients on multiple industries including Energy Infrastructure, Healthcare, Metal Mining, Retail, Oil Gas, FIG Preparing pitch books, information memorandums, industry studies, company profiles, company focused discussion documents related to various industries Preparing financial analysis including trading/ transaction comparable, operational/ financial benchmarking etc. Meet project timelines and quality of deliverables in a manner to ensure high client satisfaction Conducting analysis performing quality control check of the outgoing reports / packs Other activities include structuring deliverables developing new capabilities / new research products Demonstrate strength and experience in client / requester relationship building and management, information / knowledge needs assessment Required Background- Post-Graduation in Finance or equiv. qualification (CFA, MBA (finance), CA or equiv.) Minimum 4-8 years of experience in the Investment banking space Strong statistical and analytical skills to assess the economic performance / analysis of companies and industries for clients The candidate should have the ability to work independently and possesses the management / leadership skills to run the research on a day-to-day basis Excellent written and spoken communication skills with experience in Client handling Working knowledge of databases such as Bloomberg, Capital IQ, Thomson Research, FactSet etc. Should be well versed with MS Office suite specially Microsoft Excel, Word and Power Point

Skill Set - Qual + Quant Responsibilities- Supporting our clients on multiple industries including Consumer, Industrials, Telecom, Real Estate, Infrastructure, Healthcare, Metal Mining, Retail, Oil Gas, FIG, Services Preparing financial analysis including trading/ transaction comparable, operational/ financial benchmarking, valuation analysis, etc. Preparing pitch books, Information memorandum (IMs), industry research, deals peers screening, company profiles and company focused discussion documents related to various industries. Meeting project timelines and quality of deliverables in a manner to ensure high client satisfaction Conducting quality control check of the outgoing reports / packs Engaging client independently on calls and e-mails Scoping the new projects, structuring deliverables/new research products Producing high quality informative and visually appealing presentations and deck Demonstrating strength and experience in client / requester relationship building and management, information / knowledge needs assessment Required Background- MBA/ CFA/ CA with 5-8 years of experience in the Investment banking space Experience of working Investment banking projects, including Financial Benchmarking, Trading Transaction Comps, Modelling Sanity , Pitch book / IM support and company profiles. Macro-economic and industry overviews with experience working across various industries. Target identification, Trading and Transaction comps o Benchmarking, Ratio analysis. Should be able to work independently, with minimal guidance and support. Prior experience in handling clients directly through calls / mails. Excellent written and spoken communication skills . Should be well versed with MS Office suite specially Microsoft Excel, Word, and Power Point . Working knowledge of database such as Bloomberg, CapitalIQ, Factset, Thomson, etc

Develop, build and or validate complex project financial models to evaluate various project investment scenarios. The models would comprise project cash flows modelling, debt capacity modelling and also tax equity modelling relevant to US power and infrastructure projects Independently able to structure models in discussion with onshore bankers following a suggestive approach and execute with excellent quality to ensure high client satisfaction Additionally, should be able to prepare deal related memos i.e. credit approval memos, investment memorandums etc. Demonstrate strength and flair in client/requester relationship building and management, information/knowledge needs assessment Required Background: MBA/ CFA/ CA with 4+ years of Power including Renewable Energy like Solar and Wind Energy projects or infrastructure projects in an investment banking division of a bank, boutique firm, KPO, consultancy, or advisory firm Strong analytical and statistical skills to assess and understand project investment structures, government regulations/ policies and industry, to prepare models and related assumptions The candidate should be self-starter and should be able to work independently Excellent written and spoken communication skills MS Office skills MS Excel should excellent along with proficiency in MS PowerPoint and MS Word.

Prepare indents for FB section as per the consumption pattern, and keep proper track of breakages, and maintain consumption reports and costs of department Ensure implementation of company discipline at site Adhere to proper food hygiene and storage practices Ensure complete care and handling in relation to catering service and buffet equipment Observe and enforce safe working practices with all subordinate staff Follow all safety rules and procedures as per the site requirements Ensure that equipmentand materials are not left unattended Key Responsibilities Food Operations Ensure that all the service deliveries are carried out as per the terms and conditions agreed upon with the client Initiate development of new menus, upgrade old menus and special event menus Develop new ideas for promotions, festivals and other special events Ensure that safety and hygiene policy is strictly followed at site Carry out operational audits to check for confirmation to laid down processes and policies Communication and Client Retention Stay in close communication with the client for all issues regarding services, additional business, new initiatives and hygiene and prepare documents of the same Ensure that the branding policy is rolled out and followed as per the specifications Ensure 100% client retention Timely addresses of all issues with pertaining to the client and the operations Cost Management Coordinate with the Purchase department to understand and forecast the cost trends and revisions Develop suitable operational strategies to address increase in costs Analyse the operational cost centreand provide solutions to increase the efficiencies in site Qualifications: Experience in a high pressure catering environment, preferably in a commercial or industrial environment Understanding of electronic cash register systems and basic bookkeeping Computer literacy Sound communication skills Work scheduling and planning skills Leadership skills Well-groomed and able to represent Sodexo in a professional manner Customer focused Organized and self-motivated Creativity and an eye for detail Team Working Collaboration

Prepare indents for FB section as per the consumption pattern, and keep proper track of breakages, and maintain consumption reports and costs of department Ensure implementation of company discipline at site Adhere to proper food hygiene and storage practices Ensure complete care and handling in relation to catering service and buffet equipment Observe and enforce safe working practices with all subordinate staff Follow all safety rules and procedures as per the site requirements Ensure that equipmentand materials are not left unattended Key Responsibilities Food Operations Ensure that all the service deliveries are carried out as per the terms and conditions agreed upon with the client Initiate development of new menus, upgrade old menus and special event menus Develop new ideas for promotions, festivals and other special events Ensure that safety and hygiene policy is strictly followed at site Carry out operational audits to check for confirmation to laid down processes and policies Communication and Client Retention Stay in close communication with the client for all issues regarding services, additional business, new initiatives and hygiene and prepare documents of the same Ensure that the branding policy is rolled out and followed as per the specifications Ensure 100% client retention Timely addresses of all issues with pertaining to the client and the operations Cost Management Coordinate with the Purchase department to understand and forecast the cost trends and revisions Develop suitable operational strategies to address increase in costs Analyse the operational cost centreand provide solutions to increase the efficiencies in site Qualifications: Experience in a high pressure catering environment, preferably in a commercial or industrial environment Understanding of electronic cash register systems and basic bookkeeping Computer literacy Sound communication skills Work scheduling and planning skills Leadership skills Well-groomed and able to represent Sodexo in a professional manner Customer focused Organized and self-motivated Creativity and an eye for detail Team Working Collaboration

1. To ensure 100% uptime of HT line and in case of any breakdown to coordinate with concerned persons for the rectification of the faulty line HT line. 2. To ensure the on time preventive maintenance of VCB/SF6 ensuring all safeties are operational. 3. Cleaning Inspection after Racking out of VCB (Complete Panel Shutdown mandatory). 4. Contact Gap Checking. 5. Servicing of draw out mechanism. 6. Replacement of defective parts (VCB Spares to be supplied by the IFMS Provider). 7. Checking of Manual motorized operation of VCB. 8. Contact Timing Checking. 9. Conducting annual preventive maintenance of AVR/Transformer unit including dehydration test. 10. Routine Tests shall be carried out on each unit as per IS: 2026. These tests shall consist of following- (a) Physical Examination (b) Insulation Resistance (c) High Voltage Tests (d) No-Load Current (e) No-Load Losses (f) Load Losses Efficiency (g) Induced Voltage Test (h) Output Voltage Test (i) Provision for earthing (j) Winding Resistance (k) Ratio Polarity test (l) Dielectric strength of oil. Qualifications: Knowledge of Rating and Diagram Plate ; HT Substations, Lifting Lugs, Oil level gauge; Air release plug; Drain cum Filter Valve, Explosion vent pipe, Silica gel breather ; DG Synchronization.'

Ensure completion of all schedules and capturing of abnormalities through Schedule monitoring during their watch. Suggesting on Purchase of electrical material as required to Executive technical Maintaining correct tool procedure Responsibilities Read the log book. Check the HSD tank level note down in the log book. Check the LTPCC feeders. And DGs Auto/manual positions Check the all relay position tap changer position. Check up the DG set water level, oil level and check up the specific gravity of battery (weekly once). Battery condition to be monitored. Check up the Transformer oil level (Oil temp, Winding temp, silica gel color) Record the readings twice in shift. Run D.G. on idle run daily once. Check up the capacitor bank always to maintain the unity. Note down the P.F readings in the log book. In 2nd shift at 6pm switch on the utility lights, Chiller plant, out side street lights and total plant lighting operation trouble shooting. Carry out the PM schedules /break downs works rectification on that day programs. Ensure that log sheets are up dated in the same time.

Position Summary: We are seeking a qualified and experienced Safety Officer to oversee and enforce safety protocols across our oil & gas projects, both onshore and offshore . The role involves ensuring compliance with national and international safety standards, promoting a strong safety culture, and reducing risk through proactive measures and continuous monitoring. Key Responsibilities: General (Onshore & Offshore): Implement and enforce company HSE policies, procedures, and legal compliance. Conduct regular safety inspections, audits, and risk assessments (HIRA, JSA). Ensure adherence to Permit-to-Work (PTW) systems for high-risk activities. Conduct incident/accident investigations and root cause analyses. Organize safety inductions, toolbox talks, and emergency drills. Monitor use of PPE and ensure compliance among all personnel. Maintain safety logs, reports, training records, and documentation. Support emergency response planning and execution. Onshore Operations: Supervise construction, maintenance, and shutdown activities. Monitor excavation, scaffolding, heavy lifting, and confined space work. Ensure hazardous materials (HAZMAT) are handled per MSDS guidelines. Coordinate with contractors and ensure safety compliance across teams. Offshore Operations: Oversee helicopter landing zone safety and offshore personnel transfer. Conduct platform and vessel safety drills (fire, abandon ship, man overboard). Inspect lifesaving equipment, SCBAs, lifeboats, and fire systems. Monitor marine safety practices and oil spill response protocols. Liaise with offshore emergency response teams and marine safety authorities. Qualifications & Experience: Bachelors Degree (B.E./B.Tech) Diploma in Industrial Safety / NEBOSH IGC or equivalent certification. Minimum 35 years of experience in HSE roles within the Oil & Gas sector. Experience in both onshore and offshore operations is preferred. Valid Offshore Survival (BOSIET) and Medical Certification (as applicable). Knowledge & Skills: Strong understanding of OSHA, ISO 45001, API, OISD, and other HSE standards . Excellent communication, training, and interpersonal skills. Ability to work in remote and challenging environments. Proficient in incident investigation tools and HSE reporting software.

SAFETY ENGINEER 8 years experience Previous experience in Kuwait is preferred Safety Engineers- Job Description The HSE Engineers will be reporting to the HSE Manager and shall ensure the safe execution of the construction activities of the project in respective work sites. The HSE engineer is responsible for the following ? To ensure the fulfilment of all the HSE Requirements as per KOC HSE Procedures and requirements ? Responsible for the safe execution of all the works at respective work site ? Conducting overall Toolbox Talk on a weekly basis before starting the work ? To ensure required PPE to all the employees those who are entering the work site. ? To ensure regular and proper HSE Trainings, HSE awareness programs, Toolbox meeting for the workers. ? To coordinate, assist and conduct HSE Audits on each site on regular basis ? Coordination with KOC/PMC HSE representatives and assist during their site visits. ? Ensure implementation of all the HSE Recommendations provided by the KOC/PMC HSE representatives during their site visits. ? Ensure implementation of all the HSE Recommendations from the KOC/PMC HSE representatives after their Inspections or Audits ? Maintaining proper HSE records and ensure proper updating ? Instructing & educating the HSE Officers about the importance of safety requirements and procedures on regular basis ? Coordination with PMC HSE Team for the regular site inspections and auditing. ? To attend and clear the HSE issues raised by KOC/PMC HSE Team and site representatives in coordination with the construction supervisors at site. ? Responsible for the safe execution of sup-contract work (if any) in coordination with the respective subcontractor's HSE Officer ? Control & ensure the availability of PPE for the employees at site, newcomers, and visitors on each site/store. ? Proper HSE Reporting to KOC about the Accidents, Incidents, First Aid, Near Miss, SOC and Trainingsetc. on Monthly or Weekly basis as required. ? To ensure safe execution of the project in compliance to the KOC HSE standards & procedures ? Confirm The number of HSE officers shall be in accordance with HSEMS guidelines for Contractors