371 Detail Design Jobs - Page 5

Project: DPR Preparation for Interception & Diversion and STP Works across 21 ULBs in Bihar under SBM 2.0 InitiativeRole & responsibilities (Immediate Joining Requirement) About the Role : BLG has been appointed as the Consultant by the Urban Development & Housing Department (UDHD), Govt. of Bihar to prepare Detailed Project Reports (DPRs) for Interception & Diversion and Sewage Treatment Plant (STP) works for 21 Urban Local Bodies (ULBs) under the Swachh Bharat Mission (SBM 2.0) . We are looking for a Team Lead/Project Manager to be based in Patna , who will lead the DPR preparation, coordinate with stakeholders, and ensure high-quality deliverables. Key Responsibilities : Lead end-to-end DPR preparation for sewerage and STP projects. Supervise design, engineering, and planning activities for I&D works and STPs. Review and finalize hydraulic, structural, and process designs prepared using standard design software tools . Ensure DPRs comply with CPHEEO guidelines, SBM 2.0 requirements, and state regulatory standards. Coordinate with government officials, contractors, and other stakeholders. Prepare progress reports, presentations, and technical documentation for submission. Essential Qualifications & Skills Required: B.E./B.Tech in Civil Engineering (mandatory). 10+ years of overall experience in infrastructure/wastewater projects. Minimum 3 years of design experience in sewerage / STP projects. Proficiency in design software (e.g., SewerCAD, AutoCAD, STAAD, or similar). Strong project management and client coordination skills. Excellent communication, reporting, and leadership abilities. Resident of Patna, Bihar (mandatory). Preferred Qualifications: Masters in Environmental Engineering . Prior experience in DPR preparation under SBM/AMRUT/JICA/ADB-funded projects.

• Should be able to perform process & utility calculations • P&ID development and Line list • Equipment sizing and specifications (i.e. Vessels, pumps & packages ) • Review of vendor documents & TBA preparation Required Candidate profile • Lead & mentor a small team of junior engineers • Interacting with client & vendors • Interacting with project & other disciplines • Proficient in Hysis & Aspen plus

## Exciting Job Opportunities at Changepond Technologies for Mechanical Design Engineer with experience in Solidworks design tool to join our Chennai team. Position - Mechanical Design Engineer Exp - 03yrs - 08yrs Qualification - B.E / B. Tech (Mechanical, Automobile) Interview Mode - Direct F2F Interview (Tool Test) Work Location - Chennai (Siruseri IT Park) Notice Period - Immediate to 15days (Max 30days) Company profile - https://www.changepond.com/ Job Description: Strong experience in Mechanical Engineering basics, Design and Calculation CAD tools : Strong in Solidworks, Autodesk Inventor, AutoCAD and basics of PDM CAD Skill : Expert in Modeling, Weldment, assembly, sheet metal & Detailing design. Knowledge of Structural design , GD&T , BOM, Welding standard must. Good understanding of Design requirement. Good communication skills Applicants with CREO experience are not eligible for this role. Note:- We encourage interested candidates to submit their updated CV's to samuel.thomas@changepond.com (Mention design tool & Experience range in Subject line, Example:- Solidworks - 3+yrs). You may reach us at 044 - 4748 0051 between 10:00 AM and 6:30 PM for any assistance. We will be conducting direct face-to-face discussions only (Monday - Friday). There will be NO virtual interview option available. We would greatly appreciate your help in sharing this opportunity with your friends and colleagues. Don't miss this opportunity to kick-start your professional journey with us...!!! Disclaimer: This is a mass email. Please disregard if your profile is not a suitable match !!!

Pressure part detailing involves creating detailed engineering drawings for components subjected to internal pressure, such as those found in boilers, pressure vessels, and heat exchangers. This process ensures accurate fabrication and assembly of these critical parts by specifying dimensions, tolerances, materials, weld details, and other relevant information. Key aspects of pressure part detailing: Understanding Codes and Standards: Pressure part detailing adheres to specific codes and standards like ASME (American Society of Mechanical Engineers) and IBR (Indian Boiler Regulations), ensuring safety and compliance. CAD Software Proficiency: Detailers utilize 3D CAD software like AutoCAD, SolidWorks, or Solid Edge to create detailed 2D drawings and 3D models. Component Specifics: Drawings include precise dimensions, tolerances, material specifications, weld details (e.g., weld type, size, and location), and any necessary supports or attachments. Bill of Materials (BOM): A comprehensive BOM is created, listing all components, materials, quantities, and relevant information for procurement and fabrication. Clear and Concise Drawings: Detail drawings must be clear, unambiguous, and easy to understand for fabrication and assembly, minimizing errors.

Role & responsibilities esponsible for Design and Engineering for Electronics Sub assemblies which shall further be integrated with Electro-Mechanical and Hydraulic systems. Detailed understanding of customer requirements and preparation of System Requirement Specifications . Conceptualisation of Electronics Systems and subsystems . Component selection . Develop Schematics and associated design deliverables for Electronics/ Electricals sub assemblies using E-CAD tools Preparation of Unit and System level harness drawings including implementation in 3D CAD environment. Support Business Development team with proposal Engineering and technical inputs. Coordination with customer for Design approvals from DRDO Labs / Armed forces Branches. Conceptualisation of enclosures wrt boundary conditions. Preparation of Harness routing and General Arrangement Drawings wrt EMI EMC aspects Preferred candidate profile Major Expertise: Expertise in Design of Electronics Control/Power System. Good understanding of Electronics and Electrical circuits . Military Applications and Standards

Plan and schedule the work and is responsible for the progress and quality of deliverables Follows company procedures and established standards to prepare engineering deliverables from rough sketches to the highest quality and standards. Develop 3D modeling in S3D/E3D/BOCAD/PDMS/PDS/TEKLA of offshore platform structures - jacket, deck, living quarters, bridges and all appurtenances Participate in 3D modeling review activity interfacing with multidiscipline Develop structural library/catalogue/database for project scope of work Liaison with multidiscipline for clash resolution Review and prepare structural deliverables such as detail and design drawings, As-built drawings & 3D model. Review, check and comment structural requirements in other inter-discipline drawings. Providing advice on constructability issues and safety in design Responsible for maintaining the standard of drawings produced. Qualifications and experience: IIT/Diploma in Engineering (Civil) with 10 to 15+ years of experience in detailing work & 3D modeling work of offshore oil & gas projects, fixed wellhead platforms jacket, pile foundations, deck and appurtenances structures, FPSO modules and development of detailed design drawings Execute 3D modeling activities both in SP3D/BOCAD/PDMS/E3D/TEKLA (Concept, FEED, technical study & detailed design) as well as design and drafting activities in 2D software AutoCAD/Microstation Capability in drawing extraction/draft generation for 2D drawing development Working knowledge of standard offshore international and national industry standards and specifications To work without direct supervision and to be able to provide advice and direction to other designers Participate in Offshore platform Surveys, prepare survey checklist in line with project scope of work Proficient in AutoCAD/Micro station packages for design and drafting, MTO/Weight Control Report preparation Proficient in Smart Plant 3D and Smart Sketch, PDS and Frameworks Plus. Familiar with BOCAD/PDMS/E3D/TEKLA and other steel detailing packages Good working knowledge of 2D and 3D systems and their capabilities (SP3D, PDMS, E3D, PDS, TEKLA, AutoCAD, Microstation). Maintain good communication with discipline team and inter discipline. Good knowledge of Steel and Fabrication practices, interface with yard engineering, development of fabrication friendly detailing Experience in quality control aspects and guiding the team with proper checking procedures Handling site queries, interface with multi-discipline while detailing process Special requirements: Expert/Hands on experience in 3D modeling, drawings extraction, MACRO development and detail drawings development through AutoCAD/Microstation for Offshore process platforms/Wellhead platforms Jacket/Deck/ pile foundations/appurtenances structures

As an experienced professional with 7 to 15 years of expertise in detail design of Electrical Systems for Industrial Buildings, you will be responsible for utilizing your in-depth knowledge and skills to create efficient and effective electrical layouts. Your role will involve interpreting project requirements, developing detailed design plans, and ensuring compliance with industry standards and regulations. You will collaborate closely with other team members, including engineers and architects, to integrate the electrical system design seamlessly within the overall project scope. Your contribution will be critical in optimizing the functionality and reliability of the electrical systems, while also considering factors such as safety, energy efficiency, and cost-effectiveness. In addition to your technical proficiency, you will need to demonstrate strong problem-solving abilities, attention to detail, and a proactive approach to identifying and addressing potential design challenges. Your communication skills will also be essential, as you will be required to effectively liaise with clients, contractors, and stakeholders to ensure project requirements are met and expectations are exceeded. Overall, this role offers a dynamic and rewarding opportunity for a seasoned professional to showcase their expertise in electrical system design within the context of Industrial Buildings. If you are looking for a challenging yet fulfilling career path that allows you to make a tangible impact in the built environment, this position may be the perfect fit for you.,

The Lead Engineer Analyzer is responsible for developing detailed design drawings, engineering calculations, and bill of materials based on customer specifications. Working closely with the project engineer, you will ensure that the package is approved by EPCs and end-users. In this role, you will be focused on the detailed engineering and design of Liquid & Gas Analyzer Systems, which includes Analyzer Houses, Sample systems, Cabinets, Racks, and more. Your responsibilities will involve generating engineering calculations for various parameters such as stream composition, flash points, dew points, sample lag times, and power consumptions. You will also prepare specifications for components of Analyzer Systems including HVACs, Electrical Panel Boards, Valves, Pipes, and more. Additionally, you will be evaluating supplier quotes for technical feasibility and ensuring they meet project requirements. Designing all aspects of the Analyzer Shelter, such as Structural Design, UPS, HVAC, Grounding, Fire & Gas systems, Lighting, Electrical Utilities, and more will be a key part of your role. You will also support customers on technical aspects to obtain timely approval of engineering documentation. As a Lead Engineer Analyzer, you will lead technical clarification meetings with EPCs and end-users, providing resolutions to any issues that may arise. Your expertise in Design Engineering Skills, Analytical Practices, and Process Analytical Standards will be essential in meeting the satisfaction of EPCs and end-users. Adherence to QMS/QHSE requirements and Company Compliance Policy is crucial, along with conducting business ethically in compliance with laws and regulations. Qualifications: - Graduate in Engineering Required Skills: - Minimum 6-12 years of experience in Design & Engineering of On-Line Process Analyser Systems - Familiarity with Process Analytical Engineering Standards, Procedures, Applications, and Best Practices for On-Line Process Analyser Systems.,

Primary Responsibilities: Be able to lead the deliveries end to end Prepare detail design documents based on HLD. Consult with System Analyst, Subject Master Expert, users to evaluate business requirements, evaluate existing or proposed systems, and prepare detailed technical design document from which programs will be written Walk-thru the technical design document with SA/SME/QA group and support team Review the details design & develop or modify the existing batch or online modules programs Ensuring timely deliveries for all assigned tasks Participation in Design reviews, Test Case reviews, and Production Support readiness reviews for new releases Support QA, UAT and Release phases of the project via defect analysis, change maintenance, etc. Adhere to all quality requirements Be able to work independently Comply with the terms and conditions of the employment contract, company policies and procedures, and any and all directives (such as, but not limited to, transfer and/or re-assignment to different work locations, change in teams and/or work shifts, policies in regards to flexibility of work benefits and/or work environment, alternative work arrangements, and other decisions that may arise due to the changing business environment). The Company may adopt, vary or rescind these policies and directives in its absolute discretion and without any limitation (implied or otherwise) on its ability to do so #Nic #NJP Required Qualifications: Undergraduate degree or equivalent experience 5+ years of IT experience in AS400 technologies Hands-on experience in DB2/400 Experience in RxClaim core adjudication area Solid knowledge and hands-on experience in SYNON Solid knowledge of SQL Proven ability to ensure timely deliveries for all assigned tasks Proven ability to participate in Design reviews, Test Case reviews, and Production Support readiness reviews for new releases Proven ability to support QA, UAT and Release phases of the project via defect analysis, change maintenance, etc. Proven ability to adhere to all quality requirements Proven ability to work independently Proven good communication and presentation skills Proven good attitude and self-motivated Adaptable to work in evening shift (11:30 am 8.30 pm or 2:30 pm 12:00 am) Proficiency with AI-powered development tools such as GitHub Copilot or AWS Code Whisperer or Googles Codey (Duet AI) or any relevant tools is expected. Candidates should be adept at integrating these tools into their workflows to accelerate development, improve code quality, and enhance delivery velocity. Expected to proactively leverage AI tools throughout the software development lifecycle to drive faster iteration, reduce manual effort, and boost overall engineering productivityAt UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes an enterprise priority reflected in our mission.

Handle the design & engineering activity of electrical substations. Coordinate with internal teams, clients, & stakeholders to understand project requirements & objectives. Develop project plans, schedules/ budgets for substation design projects. Required Candidate profile Bachelor's degree in Electrical Engineering or related field. Master's degree preferred. Minimum of 5 years of exp in electrical engineering, with a focus on substation design & technical reviews.

We are looking for a creative and detail-oriented Interior Architect who is passionate about crafting spaces. The ideal candidate will have a strong artistic vision, technical expertise, and excellent interpersonal skills.

Technical Skills : Basic knowledge of processes related to Oil & Gas./Refinery/Petrochemicals Line sizing including liquid and vapor line sizing. Pump Hydraulic calculations including NPSH & head calculations. Relief valve sizing based on APL STD 520/521. Developing /updating process flow diagrams including Heat & Mass balance calculations. Developing/updating P&IDs Equipment sizing & preparing process datasheets for Heat Exchangers, Atmospheric storage tanks, Distillation columns, Pumps, Compressors, Filters, Dryers , package units(e.g, N2 , generation plant, Fired heaters, Compressed air plants, Steam boiler, Water treatment plants) Preparing instrument process data sheets for pressure, flow, temperature & level instruments. Preparing other process drawings/calculations such as utility summary, line list, equipment list, electrical load list. Participating in HAZOPs and safety studies Lead and contribute to the development, review, and optimization of process engineering designs for oil and gas facilities, adhering to industry standards and regulations. Conduct process simulations, feasibility studies, and risk assessments to ensure efficient and safe operations. Software/System Skills: ASPEN,HYSYS,HTFS,FLARENET Understanding of codes and standards like API,ASME,BS, ANSI,TEMA Special Skills : Good Communication in English (Written & Spoken) and Presentation Skills. Experience in Multi Discipline engineering environment. Provide technical guidance and mentorship to junior engineers, fostering their professional growth and development. Stay abreast of emerging technologies, best practices, and industry trends in process engineering for the oil and gas sector.

Responsibilities: * Lead design team, manage projects from concept to launch. * Collaborate with cross-functional teams * Ensure compliance with industry standards & client requirements * Oversee design coordination, management & review processes

Primary Responsibilities: Be able to lead the deliveries end to end Prepare detail design documents based on HLD. Consult with System Analyst, Subject Master Expert, users to evaluate business requirements, evaluate existing or proposed systems, and prepare detailed technical design document from which programs will be written Walk-thru the technical design document with SA/SME/QA group and support team Review the details design & develop or modify the existing batch or online modules programs Ensuring timely deliveries for all assigned tasks Participation in Design reviews, Test Case reviews, and Production Support readiness reviews for new releases Support QA, UAT and Release phases of the project via defect analysis, change maintenance, etc. Adhere to all quality requirements Be able to work independently Comply with the terms and conditions of the employment contract, company policies and procedures, and any and all directives (such as, but not limited to, transfer and/or re-assignment to different work locations, change in teams and/or work shifts, policies in regards to flexibility of work benefits and/or work environment, alternative work arrangements, and other decisions that may arise due to the changing business environment). The Company may adopt, vary or rescind these policies and directives in its absolute discretion and without any limitation (implied or otherwise) on its ability to do so Required Qualifications: Undergraduate degree or equivalent experience 5+ years of IT experience in AS400 technologies Hands-on experience in DB2/400 Experience in RxClaim core adjudication area Solid knowledge and hands-on experience in SYNON Solid knowledge of SQL Proven ability to ensure timely deliveries for all assigned tasks Proven ability to participate in Design reviews, Test Case reviews, and Production Support readiness reviews for new releases Proven ability to support QA, UAT and Release phases of the project via defect analysis, change maintenance, etc. Proven ability to adhere to all quality requirements Proven ability to work independently Proven good communication and presentation skills Proven good attitude and self-motivated Adaptable to work in evening shift (11:30 am 8.30 pm or 2:30 pm 12:00 am) Proficiency with AI-powered development tools such as GitHub Copilot or AWS Code Whisperer or Googles Codey (Duet AI) or any relevant tools is expected. Candidates should be adept at integrating these tools into their workflows to accelerate development, improve code quality, and enhance delivery velocity. Expected to proactively leverage AI tools throughout the software development lifecycle to drive faster iteration, reduce manual effort, and boost overall engineering productivityAt UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes an enterprise priority reflected in our mission.

Job Role : Design Lead Solar (Civil / Structural) Minimum Qualification : B.E. / B. Tech in Civil / Structural Engineering Experience: Experience : 8 - 12 years (Must have experience in design aspects of Solar PV Power Plants / Power Distribution Projects) Objective: As Design Lead (Civil / Structural), the person shall be capable of reviewing & executing Engineering Activities of Civil/Structural Engineering of Solar PV Power Plants. He / She shall facilitate the modellers in development of BIM 3D Model for PV Solar Power plants. In addition, she / he has to coordinate with other departments including Inter-departmental checks covering Electrical, Instrumentation, MEP and others. The Design Lead (Civil / Structural ) shall be required to provide support for the engineering activities covering the full cycle of works from pre-bid engineering to commissioning and O&M and to extend support to site team when ever required. She / He shall lead a team of Design Engineers and Draughts Persons to manage the Engineering activities within budget, deliver on time and maintaining a high quality of Engineering. Role & responsibilities: Timely Delivery of Engineering Drawings & Documents Ensure deliveries are aligned to Project Schedule Review drawings by Design Engineers & Draughts Persons. Checking of design & sizing calculations of engineering electrical equipment and obtaining approvals from the client Review of Vendor deliverables pertaining to Engineering Capable of Multitasking and deliver multiple things on time Estimate and Plan man-hour requirements Review BOQ and submit to contracts team and providing technical clarifications Coordinate with multiple disciplines for ensuring inter-departmental checks Provide support & clarifications to the Site Execution team Check pre-award evaluation of vendors (w.r.t. technical specifications requirement of the client) and forward the validation document to Supply Chain Management Inspect equipment from the finalized vendor after submission of validation document of the vendor Clarify issues w.r.t. the design & requirements of the client to the Site Execution Team Collect inputs for project details (Soil report, boundary coordinates, Topo Survey etc.) from client & Section Head Coordinating with Operations team and informing Design specifications for obtaining approval • Collect inputs for project details (General Arrangement Drawings) from Vendors Provide support to Electrical DC, AC & Instrumentation for reviewing Vendor drawings Submit requirement of man-hours for undertaking & reviewing of design & drawings of the project Design deliverables like Module mounting structure design, GA Drawing, Control room, Inverter room civil & Structural drawings & document, Solar Plant Civil infrastructure drawings and design. Technical Expertise: Design Lead shall have technical expertise in Engineering activities for civil & structural covering control room buildings, transformer foundations, outdoor equipment foundations, inverter rooms, grading, roads and drainage, outdoor steel structures and miscellaneous works related to the Solar Power Plant. Design Lead shall be able to review Vendor engineering documents with respect to Civil & Structural design. The Design Lead (Civil / Structural) is required to understand and interpret the contractual technical requirements and facilitate the Project Teams as and when required

experience in Basic Engineering, Front End Engineering Design(FEED), Design & Detailed Engineering of Static Equipment's for Oil & Gas refinery, Petrochemical,Specialized in Pressure Vessel Columns, Heat exchanger, Mounded Bullets, Expert PV Elite,

Plan for designing GA, Assembly, part drawings, technical specifications and BOM for multiple projects with the time line. Review the Technical details of various equipment’s Focus on new product development for various segment such as Automobile

Role & responsibilities Complete and detailed electrical designing and engineering of kW and MW-scale PV plants (ground mount & roof top) Designing and calculation of DC and HT/ LT AC systems Designing and calculation of up to 220 kV substation Designing and calculation of power transmission and distribution systems Designing and calculation of switchgear, transformer systems, electrical rooms/ enclosures Cable sizing, routing and loss calculation Designing and calculation of electrical safety, protection, earthing, metering, etc. systems UPS and battery sizing Developing key single line diagrams (SLD), plant layout diagrams, interconnection diagrams, etc. Designing of control logic diagrams and schematics Designing SCADA and PLC systems Evaluation and due diligence of various bids/ RFPs/ queries for development and EPC of power plants Project planning, manpower estimation, scheduling and budgeting, If needed Development of specifications, bill of quantities, and cost estimation Floating of inquiry for electrical supply and works Evaluation and negotiation on quotations/ proposals/ bids from suppliers and contractors Knowledge and compliance with IS codes/ IEC standards for electrical designing Coordination with clients, management, project teams, own/ other design teams, support teams such as procurement, etc. throughout the project cycle Tools: AutoCAD, PVSyst , PV*SOL, SolidWorks, HelioScope Technical skills required Knowledge of IS codes/ IEC standards for electrical designing AutoCAD, PVSyst, PV*SOL, SolidWorks, HelioScope

Job Description: To ensure Offshore / Subsea Pipeline & Subsea Cable design integrity is not compromised while managing the execution of the project. Must have minimum 5 years & above experience in executing Concept Study, Front End Design engineering for Offshore / Subsea Pipeline & Subsea Cable design activities in line with latest DNV Code of standard, including co-ordination with the various discipline groups Job Responsibilities: Duties will include the following: Experience in preparation of Offshore / Subsea Pipeline & Subsea Cable Design documents independently in compliance with latest DNV codes of standards and complete the design activities within specified schedule & budget. Shall work under the supervision of Lead engineer for the project with effective communication with Engineers and Designers. Should be able to guide Engineers & Designers on technical and non-technical issues towards effective solutions. Capable of executing multiple tasks and delivering it efficiently within specified schedule. Experience in working on Offshore / Subsea Pipeline & Subsea Cable design activities (Mandatory Requirement) such as; Preparation of Offshore / Subsea Pipeline & Subsea Cable Basis of Design document Offshore / Subsea Pipeline and Subsea Cable Route selection studies Offshore / Subsea Pipeline Coating Selection studies. Offshore / Subsea Pipeline Wall thickness design as per DNV OS F 101 (Latest code) Offshore / Subsea Pipeline Expansion Analysis On-Bottom Stability studies for Offshore / Subsea Pipeline & Subsea Cable (As per DNV RP F 109 latest DNV Code and hands-on experience in executing DNVs STABLELINES Software). Offshore / Subsea Pipeline FREE span analysis (As per DNV RP F 105 latest DNV Code and hands-on experience in executing DNVs FATFREE Software). Offshore / Subsea Pipeline Cathodic protection studies (As per Latest DNV RP F 103). Offshore / Subsea Pipeline Crossing analysis using CAESAR software Subsea Cable Crossing Analysis using ORCAFLEX Software Offshore / Subsea Pipeline crossing support design. On-bottom roughness analysis of Offshore / Subsea Pipeline using SAGE PROFILE / ABAQUS software On-bottom roughness analysis of Subsea cable using ORCAFLEX software Offshore / Subsea Pipeline and Riser protection studies as per DNV RP F 107 & As per Latest DNV Codes. Riser Flexibility stress analysis including VIV studies. Riser Fatigue design studies (As per Latest DNV Codes) Offshore / Subsea Pipeline laying and Riser installation studies using OFFPIPE / ORCAFLEX software Subsea Cable Installation analysis using ORCAFLEX Software. Offshore / Subsea Pipeline Upheaval and Lateral Buckling analysis (Detail Global Buckling Analysis using ABAQUS FEM software is preferred). Preparation of Offshore / Subsea Pipeline Material and Construction specifications. Construction and Procurement support. Shall have experience in preparation of Material requisition, Technical bid evaluation and Purchase requisitions. Offshore / Subsea Pipeline & Subsea Cable Material, Construction associated Cost estimation. Specific knowledge on Waves machines and Structural dynamics related to Offshore Pipeline / Subsea cable analysis & Design is must Platform approach drawings Alignment sheets Riser / J Tube General arrangement drawings Offshore Pipeline & Subsea Cable crossing drawings Technical discussions with the client, project manager and other discipline leads to resolve the project issues. Preparation of other technical reports as required by the project. Quality Assurance Responsible for working within the provisions and guidelines of the Worley Quality Assurance system relevant to the Oil & Gas Business Unit Safety Responsible for personal safety & safe working practices for the Oil & Gas Business Unit. Preferred Experiences Working experience in an engineering consultancy in a multidiscipline environment. 10 + Years design experience in the Offshore Pipeline & Subsea cable Design with experience in FEED and detailed design of Oil and Gas pipelines. Good knowledge of relevant international codes & standards e.g. DNV, API, ASME, NACE, BS etc. Good communication and technical writing skills in English language. Coming out with creative solutions to optimize work delivery and an avid learner. Ability to work under tight deadlines and prioritization of work to achieve them. Good Team Player Computer skills particularly in the use of DNV Software, STABLINES & FATFREE, CEASER, ORCAFLEX, SAGE PROFILE software and knowledge of MS Office, Mathcad, C & C++ language etc. Hands on experience in ABAQUS Finite Element Software is essential.

Job Role : Project Engineering Manager Substation (MEP) Reports to (Job Role) : Head of Engineering Substation (MEP) Reported by (Job – Role) : Draughtsperson Education : B.E. / B. Tech. in Mechanical Engineering Minimum Qualification : 10 -15 years. Predominantly in Mechanical Engineering aspects of Power transmission industry (Preference) and Considerable experience in leading and executing projects (5 – 6 projects) Objective / Purpose As a Project Engineering Manager – MEP, the person is primarily responsible for facilitating coordination between multi-disciplines and also ensure that the engineering activities of the project takes place within stipulated time within the margins (w.r.t. both quality & cost). She / He shall also be required to incorporate of optimizations for the delivery of the project with a positive margin. She / He is required to be responsible for the approval of detailed design engineering for a project by coordination with several disciplines (Substation, Structural, Civil & Instrumentation) for design purposes. The Manager shall also be responsible for work allocation (man-hours allotment) for different roles required for a project. Key Responsibilities: • Coordination with multi-disciplines (Civil, Structural, Electrical) for understanding and communicating of requirements of client and providing clarifications • Undertaking Detailed Heat Load calculations and Reviewing of designs, calculations & drawings (as submitted by Draughtsperson) and ensuring their timely submissions after obtaining approvals from customer • Clarification of issues w.r.t. vendors and ensuring timely delivery of materials at project site • Enabling & reviewing of accurate estimation in terms of quantity for submission of Bill of Materials • Reviewing of critical issues and procedural delays w.r.t. design aspects of equipment and extending support to Site Execution teams • Settling procurement issues and extending support to Supply Chain management for ensuring order finalization for Vendor Engineering • Extending support for BOQ, review of pre-bid offers and technical submissions & providing post-tender clarifications (after clarification from vendors) to the contracts team • Reviewing of Vendor evaluation (w.r.t. technical specification requirement of the client) • Responsible for ensuring Manufacturing Clearance by undertaking and facilitating necessary communication with suppliers • Communicating & clarifying deliverable list from the client and obtaining resource requirement for project • Inspection of HVAC & Fire-fighting equipment of Substation Technical Expertise: The Project Engineering Manager shall have major designing experience and knowledge of ancillary mechanical equipment selection – HVAC (Package Air Conditioning units, Duct-able Splits, AHU, VRV type AC units, Chillers, Cooling towers, Centrifugal fans, Tube Axial Fans, Ducting, Grills, Dampers, Insulation) & Firefighting (Pumps, Smoke detectors, Heat detectors, GI & MS piping, gas suppression system, HVW System). Furthermore, the Manager is required to have understanding of leading and execution of projects (for state / central / private) utilities with suitable optimization considerations. Finally, the she / he should have detailed knowledge of the equipment to be installed and the market conditions for vendor engineering. Operating Network: Internally: Head of Engineering, Inter-discipline Heads, Project Execution team, Supply Chain Management team, Quality team, Contracts team Externally: Customers (Engineering team), Client (Project Management team), Vendors (Engineering & Quality team) Key Value Drivers • On-Time Delivery (Schedule Adherence) • Savings Generated (Quality & Cost Optimization) • Skill Development • Digitalization • Standardization (Eliminating Inefficiency) • Productivity (Man-Hours allotted) • Strike Rate of Bids Submitted Software Skills Required: Awareness of HAP (Hourly Analysis Program) for HVAC and Calnut & FHC (Fluid Hydraulic Calculation) for Fire-fighting equipment for reviewing purposes

Job Role : Project Engineering Manager Substation / Renewable Reports to (Job Role) : Head of Engineering Reportee (Job Role) : Design Lead (Solar AC), Design Lead (Solar DC), & Vendor Engineering Lead - Solar Minimum Qualification : B.E. / B. Tech. in Electrical / Electrical & Electronics Engineering Experience : 15+ years (Must have experience predominantly in design aspects of Substation Construction and leading Engineers in execution of multiple projects) Objective: As a Project Engineering Manager, the person shall ensure that the engineering activities of the project takes place within stipulated time (w.r.t. both quality & cost). She / He shall ensure the adherence to L2 schedule during execution of the project. She / He shall work on optimizations / alternate proposals / solutions for quick delivery of the project with a positive margin. She / He shall perform inter-discipline coordination (Civil, Structural, MEP & Instrumentation). The PEM shall perform work allocation and man-hours allocation of different roles in the project. Key Responsibilities: Coordinate with Project Planning Manager and ensure deliveries are aligned to Project Schedule Conduct regular project review meetings and ensure adherence to schedule Conduct internal review meetings for resource optimization, allocation and enhance productivity Review of designs, calculations & drawings and ensure their timely submissions after obtaining approvals from customer Clarification of issues w.r.t. vendors and ensuring timely delivery of materials at project site Capable of Multitasking and deliver multiple things on time Clarification to inter discipline Managers for sorting out issues w.r.t. design aspects of the equipment Enable & review accurate estimation in terms of quantity for submission of Bill of Materials Review critical issues and procedural delays w.r.t. design aspects of equipment and extend support to Site Execution teams Ensure BIM implementation in the projects Settle procurement issues and extend support to Supply Chain management for ensuring order finalization for Vendor Engineering Technical Expertise: The Project Engineering Manager shall have overall expertise in both primary engineering & secondary engineering for substation projects. The Manager is required to have thorough understanding in design aspects of SolarPV Project . He shall be well versed in Solar AC and Solar DC designs and interfaces between Civil, MEP & Instrumentation and Secondary engineering activities like Schemes, Wiring Diagrams, SCADA & Control System. The PEM is required to have understanding of leading and execution of projects for different geographies / clients / utilities. She / he should have detailed knowledge of the equipment to be installed and the market conditions for vendor engineering. The PEM is required to understand and interpret the contractual technical requirements and facilitate the Project Teams as and when required.

Role Summary: Assystem is seeking a strategic and technically strong Head of Engineering to lead the Detailed Design Engineering function for Railway Projects . This role is responsible for delivering high-quality design outputs, ensuring commercial performance, and maintaining strong client relationships. The ideal candidate will bring leadership experience in rail systems or infrastructure design with a focus on P&L ownership, invoicing, and client-facing delivery. Role & Responsibilities: Lead the engineering design function for railway infrastructure and systems projects. Manage end-to-end delivery of detailed design packages in alignment with project scope, schedule, and quality requirements. Drive profitability through full P&L ownership, budget control, and resource optimization. Oversee invoicing cycles and ensure accurate billing and cash flow alignment. Act as the principal engineering liaison for clients, ensuring satisfaction and alignment with project goals. Support pre-contract activities, proposals, and technical strategy development. Mentor and lead multidisciplinary engineering teams across various project phases. Key Qualifications & Skills: Bachelors or Masters in Electrical, Civil, Electrical, Mechanical. 20+ years experience in railway infrastructure or systems design. Strong understanding of rail engineering standards and regulatory frameworks. Demonstrated experience managing P&L, invoicing, and commercial performance of projects. Proven ability to manage client relationships in complex, high-value engineering environments. Familiarity with railway design tools and platforms (e.g., Bentley, AutoCAD Rail, BIM). Strong leadership, communication, and organizational skills.

The successful candidate will lead, develop, and deliver projects through various stages of design from feasibility to planning/detailed design and onto construction. You will ensure the successful delivery of projects by working collaboratively within a multi-disciplinary environment. You will supervise project teams in the production of feasibility studies, detail design and construction drawings, specifications, and technical reports. It will be your responsibility to carry out technical reviews and check design work carried out by other team members. Additionally, you will be involved in the production and review of designs for projects in accordance with relevant design standards and codes. Embracing digital engineering and promoting innovative engineering design solutions will be a key aspect of your role. You will also act as a mentor to other team members, potentially with line management responsibility. Managing projects to programme and budget and liaising with clients to discuss technical solutions in the delivery of civil engineering to stakeholders, including technical and non-technical clients, both in projects and at the tender stage, will also be part of your responsibilities. Furthermore, you should be able to lead and contribute to winning work through the production of fees, scopes, and quality answers in response to client tenders. RESPONSIBILITIES You will be responsible for leading and production of highway engineering designs and construction drawings independently for various UK schemes using relevant standards. You will be active on a number of projects at any given time and will be supported by a team of experienced and developing technical staff of various grades, to whom you will provide guidance and support as appropriate. Your role will involve contributing to all types of projects, ensuring that your projects are delivered to the budget, programme, and technical standards while meeting QA, CDM, Sustainability, and HSE requirements. Internal client liaison, assisting in the preparation of fee proposals, recruitments, and financial control of projects when acting as a package manager will also be part of your responsibilities. You will need to mentor, support, train, and encourage young engineers and technicians to manage their own learning to develop their skills and improve their performance. QUALIFICATIONS You should be able to demonstrate comprehensive knowledge of and experience in UK highway design, including road geometry, road restraint systems, site clearance, pavement, signages, and road markings. Advanced level proficiency in relevant design software such as Civil 3D, Open Roads, MX, PDS/Key Line and Sign, AutoCAD, and ProjectWise is required. Proficiency in the use of standard office software is essential. You should be capable of producing technical specifications and reports, have experience in work package management, resource management, liaison with clients, co-professionals, and design teams, and possess excellent written and verbal communication skills. DESIRED SKILLS Project management and financial management skills are desired for this role. QUALIFICATIONS A bachelor's or post-graduate degree in Civil Engineering or equivalent with 6-12 years of post-graduate experience in highway design is required. Working towards a recognized professional qualification is also necessary.,

Job Description: To ensure Offshore / Subsea Pipeline & Subsea Cable design integrity is not compromised while managing the execution of the project. Must have minimum 5 years & above experience in executing Concept Study, Front End Design engineering for Offshore / Subsea Pipeline & Subsea Cable design activities in line with latest DNV Code of standard, including co-ordination with the various discipline groups Job Responsibilities: Duties will include the following: Experience in preparation of Offshore / Subsea Pipeline & Subsea Cable Design documents independently in compliance with latest DNV codes of standards and complete the design activities within specified schedule & budget. Shall work under the supervision of Lead engineer for the project with effective communication with Engineers and Designers. Should be able to guide Engineers & Designers on technical and non-technical issues towards effective solutions. Capable of executing multiple tasks and delivering it efficiently within specified schedule. Experience in working on Offshore / Subsea Pipeline & Subsea Cable design activities (Mandatory Requirement) such as; Preparation of Offshore / Subsea Pipeline & Subsea Cable Basis of Design document Offshore / Subsea Pipeline and Subsea Cable Route selection studies Offshore / Subsea Pipeline Coating Selection studies. Offshore / Subsea Pipeline Wall thickness design as per DNV OS F 101 (Latest code) Offshore / Subsea Pipeline Expansion Analysis On-Bottom Stability studies for Offshore / Subsea Pipeline & Subsea Cable (As per DNV RP F 109 latest DNV Code and hands-on experience in executing DNVs STABLELINES Software). Offshore / Subsea Pipeline FREE span analysis (As per DNV RP F 105 latest DNV Code and hands-on experience in executing DNVs FATFREE Software). Offshore / Subsea Pipeline Cathodic protection studies (As per Latest DNV RP F 103). Offshore / Subsea Pipeline Crossing analysis using CAESAR software Subsea Cable Crossing Analysis using ORCAFLEX Software Offshore / Subsea Pipeline crossing support design. On-bottom roughness analysis of Offshore / Subsea Pipeline using SAGE PROFILE / ABAQUS software On-bottom roughness analysis of Subsea cable using ORCAFLEX software Offshore / Subsea Pipeline and Riser protection studies as per DNV RP F 107 & As per Latest DNV Codes. Riser Flexibility stress analysis including VIV studies. Riser Fatigue design studies (As per Latest DNV Codes) Offshore / Subsea Pipeline laying and Riser installation studies using OFFPIPE / ORCAFLEX software Subsea Cable Installation analysis using ORCAFLEX Software. Offshore / Subsea Pipeline Upheaval and Lateral Buckling analysis (Detail Global Buckling Analysis using ABAQUS FEM software is preferred). Preparation of Offshore / Subsea Pipeline Material and Construction specifications. Construction and Procurement support. Shall have experience in preparation of Material requisition, Technical bid evaluation and Purchase requisitions. Offshore / Subsea Pipeline & Subsea Cable Material, Construction associated Cost estimation. Specific knowledge on Waves machines and Structural dynamics related to Offshore Pipeline / Subsea cable analysis & Design is must Platform approach drawings Alignment sheets Riser / J Tube General arrangement drawings Offshore Pipeline & Subsea Cable crossing drawings Technical discussions with the client, project manager and other discipline leads to resolve the project issues. Preparation of other technical reports as required by the project. Quality Assurance Responsible for working within the provisions and guidelines of the Worley Quality Assurance system relevant to the Oil & Gas Business Unit Safety Responsible for personal safety & safe working practices for the Oil & Gas Business Unit. Preferred Experiences Working experience in an engineering consultancy in a multidiscipline environment. 10 + Years design experience in the Offshore Pipeline & Subsea cable Design with experience in FEED and detailed design of Oil and Gas pipelines. Good knowledge of relevant international codes & standards e.g. DNV, API, ASME, NACE, BS etc. Good communication and technical writing skills in English language. Coming out with creative solutions to optimize work delivery and an avid learner. Ability to work under tight deadlines and prioritization of work to achieve them. Good Team Player Computer skills particularly in the use of DNV Software, STABLINES & FATFREE, CEASER, ORCAFLEX, SAGE PROFILE software and knowledge of MS Office, Mathcad, C & C++ language etc. Hands on experience in ABAQUS Finite Element Software is essential.

Role Summary: The Head of Engineering will lead the detailed design function for water infrastructure projects, ensuring high-quality technical delivery, client satisfaction, and financial performance. This role combines engineering leadership with commercial oversight, including responsibility for project P&L, invoicing, and client interaction Role & responsibilities: Lead and oversee detailed engineering design activities for water and wastewater projects. Ensure compliance with engineering standards, regulatory requirements, and client specifications. Manage project P&L, drive profitability, and support budget planning and control. Oversee project invoicing cycles and ensure accurate and timely billing. Act as primary engineering contact for key clients; maintain strong working relationships. Support proposal development and resource planning for upcoming opportunities. Mentor and develop engineering teams across multiple project locations. Key Qualifications & Skills: Bachelors or Masters in Civil or Environmental Engineering. 20+ years experience in water infrastructure design. Strong commercial awareness; hands-on experience with P&L and financial reporting. Demonstrated client management and stakeholder engagement capabilities. Proficiency in design software (AutoCAD, Civil 3D, BIM, etc.) and digital collaboration tools. Strong leadership, team development, and communication skills.