Hiring for Emulsion manufacturer in Chennai (Gummidipoondi) Note: No accomodation, cab and Food Shift based work Candidate Must able to travel by own Local candidates nearby factory location. Uthukottai, Palavakam, Pariyapalayam, Janapachatram, Ponneri and Kavarapetai is highly prederable Education Qualification: B.SC (Chemistry), Diplomo in Chemical Engineer, BE Chemical Enginerring Passed out yea r:2023- 2024 Experience :1 -2 Years Apprenticeship trainee CTC: 2.5 -3.5LPA (Depending on previous experience or interview performance) CTC includes (Variables+Fixed) Role & responsibilities Experience in emulsion / resins / adhesives reactor batch processing & basic trouble shooting. Able to run the reactors independently both in auto (SCADA / DCS) & manual mode. Able to manage team (at helpers level) & being a team player in the shifts. Others : SAP User experience, Quality Safety protocols inclined person. Taking batches as per the production planning with minimum batch cycle time. Timely escalation to shift in-charge and higher authorities in case of any machine related issue and cannot be resolved at individual level. Run batches as per the Production Plan within the SOPs and Quality parameters and benchmark yield. Ensure to check the correct raw material and correct quantity as per the SOP, before charging into the vessel. Responsible for all the operations with respect to the reactor, from ensuring utility, timely availability of raw material, ET preparation, charging of raw material, reactor processing as per SOP and downing. To take all batches by using Automation (except instructed for manual operation) and report any issue faced. Ensure to adhere and follow records as per QMS, Responsible Care and Zero-Defect norms. Maintain yield loss as per the forecast. Ensure to check the correct line-up of process fluids and utility (cooling & DM Hot & Cold, Stream, Stream, Air etc.) and double check that other reactor valves are in closed condition. Ensure that the generation and consumption of white water are recorded and fully consumed as per compatibility. Ensure safety of self and that of the co-workers. Always use and ensure usage of PPEs and maintain safe working environment. Report any unsafe act or condition to the shift in-charge. Ensure housekeeping and make sure that the Production area is well maintained. Immediately raise any issue that may lead to production loss to the shift in-charge. Implement and sustain 5S initiatives on the shop floor and support the team leader to set culture of compliances with regular checks and audits. Provide ideas for improvement/ innovation. *************Production Trainee or apprenticeship candidates also can apply************* Kindly go through entire details and then apply Thanks & Regards, RAMAMAGESHWARI Team Member Mailto: hrconnect@apmcindia.in Contact no: 9787836999

Role & responsibilities Kindly share the updated resume, If already shared then Reply back that you are Interested for the role and that you will attend the interview. Role Overview: The Senior Manager / Manager - Quality will be responsible for ensuring the highest quality standards across manufacturing processes, supplier quality, and finished products. The role requires expertise in Six Sigma, Lean Manufacturing, and Process Quality to drive continuous improvement and operational excellence. The individual will lead quality initiatives, implement best practices, and collaborate with cross-functional teams to maintain product integrity and customer satisfaction. Key Responsibilities: Quality Strategy & Implementation: Develop and execute a comprehensive quality strategy aligned with business goals. Process Quality Management : Drive process improvements using Lean, Six Sigma, and other quality methodologies to enhance efficiency and reduce defects. Supplier Quality Assurance: Establish robust supplier quality control mechanisms to ensure consistent raw material and component quality. Manufacturing Quality: Implement best practices in quality control and assurance to ensure defect-free production and compliance with industry standards. Continuous Improvement: Lead initiatives to enhance manufacturing excellence, reduce waste, and optimize production processes. Root Cause Analysis & Corrective Actions : Investigate quality issues, implement corrective and preventive actions (CAPA), and ensure problem resolution. Regulatory & Compliance: Ensure compliance with industry regulations, certifications, and internal quality standards. Team Leadership: Mentor and lead the quality team, fostering a culture of quality excellence and continuous learning. Customer Focus: Analyze customer feedback, address quality-related concerns, and drive improvements to enhance customer satisfaction. Certifications: Six Sigma (Black Belt/Green Belt), Lean Manufacturing, or equivalent certifications preferred. Skills: Strong expertise in Lean, Six Sigma, and quality management systems. Experience in supplier quality management and vendor audits. Proven track record of leading process quality improvements and waste reduction initiatives. Ability to drive change, implement best practices, and influence cross-functional teams. Strong problem-solving, analytical, and decision-making skills. Excellent communication and leadership abilities Thanks & Regards, Jensy, Email: recruiter@apmcindia.in Contact.No: 9585586622

JOB Details: Operation and Maintenance Mechanical press maintenance CNC/VMC machine maintenance TBM/Preventive Maintenance Kindly Send the Updated resume to proceed further for interviews Thanks & Regards, Jensy, Team Member Email: recruiter@apmcindia.in Whats App: 9585586622

Role & responsibilities Inspection & testing of incoming Raw Materials Final laboratory testing of on-line/Finished Goods; Quality Control data maintenance and data control; Environmental testing including ambient air, and water analysis Co-ordinate production to solve the online process issue Cleared approved FG lots for customer dispatches in LIMS & SAP. Co-ordination with Material control and logistics for procurement of material and dispatch of material Coordination with production for inspection of finished goods Coordination with Maintenance department for repair, calibration and maintenance of Lab Equipments Preferred candidate profile

JOB PURPOSE: The job role of a Quality manager is to actively ensure that the plants have appropriate capabilities and relevant implementation plans to deliver quality products to the customer to achieve company objectives. PRINCIPAL ACCOUNTABILITIES:(BUSINESS/PEOPLE/CUSTOMER/ PROCESS) • Responsible for analysis of Gypsum and Gypsum based raw materials • Tactical and explicit knowledge on chemical and physical analysis of raw materials and finished products • Handling of materials as per the standard safety methods. • Pass on legal compliance inspections and standards by Zone scorp as well as Group • Plant efficiency Net saleable Yield - Yield based on Budget • Plant efficiency Availability - Process stop efficiencies (Process related availability loss) compared to Budget Variable cost reduction: Board weight reduction, Energy reduction and Paper grammage reduction. • Perform training to relevant plant personnel for the elimination of losses. • Doing vertical and horizontal projects. • Doing HLQA (High level quality Assurance) matrix. • Chemical analysis i.e, Gravimetric, Volumetric (EDTA) and using latest instruments like • Handling instruments like X-ray analyser, Spectra Photometer, Flame Photo meter, pH meter etc. • Conducting physical analysis with test like fineness by using Blains apparatus, setting time by VICAT Apparatus, Compressive strength etc. • Should have basic familiarity with Ms Office. • Flexibility in working hours will be required to work. • Ensuring zero quality complaints by devising control methods. • Connect with customers to resolve the complaints pertaining to quality. • Connect with potential suppliers to check the quality of raw material.

Overview Roles: Boiler & ETP Maintenance ETP Mechanical Boiler Utility Utility Maintenance Plant Maintenance Chilling Plant Boiler House Thanks & Regards, Jensy, Email: recruiter@apmcindia.in Contact.No: 9585586622

Role & responsibilities Understand the Complete manufacturing process/ flow/ machines of the plant. Achieve shift, daily, weekly and monthly production targets of the plant (OR). Proper System bookings of the Production and Maintain proper production log books Ensure Manning for all machines in every shift to achieve production output requirements. Achieve Productivity (OEE) Targets for the machines by way of eliminating the losses. Ensure Finished Goods Availability in Warehouse all the time. Ensure First time right Production batches (Quality). Adhere to all quality standards in the manufacturing process (Mfg Area, Plodder area, Packing area, RM & PM Quality standards & in FG area). Ensure safe working place environment (Ensure proper 5S, Hygiene, No Spillages, Machine Guarding, Electrical safety standards) Ensure waste reduction in RM and PM during manufacturing production (Cost Reduction). Improve the safety behaviors of the employees by way of role modelling. Ensure Preventive Maintenance & Autonomous Maintenance SOP in spirit in the plant. Carry projects for OEE Improvement on the specific OEE Losses along with Maintenance team. Carry Quality Improvement Projects along with Quality Team for specific Quality Problems in the plant. Ensure Multi Skilling of Employees in the plan to mitigate skill gap problem. Achieve harmonious employee connect by way of Reward, Recognition, Motivation and personal connect to achieve highest levels of Productivity, Manning Issues, Skill Issues. Preferred Qualifications: Prior experience in any FMCG INDUSTRY or any manufacturing Industry Only Female

Role & responsibilities Supervise and coordinate daily production activities on the shop floor. Ensure that production targets are met in terms of quantity, quality, and time. Monitor the use of raw materials and minimize wastage. Maintain accurate production records and reports. Implement and maintain SOPs (Standard Operating Procedures). Ensure compliance with GMP (Good Manufacturing Practices) and HACCP standards. Coordinate with the Quality Assurance and Maintenance teams to resolve any production-related issues. Train and guide operators and production staff for optimum performance. Maintain a safe and clean working environment by enforcing procedures, rules, and regulations. Assist in inventory management and ensure timely requisition of materials. Monitor equipment performance and ensure regular preventive maintenance is scheduled. Requirements: Education: Bachelors degree or diploma in Mechanical Engineering, Industrial Engineering, Food Technology, or related field. Experience: 210 years in production or manufacturing operations within the FMCG industry. Skills: Strong understanding of production processes and systems Knowledge of quality and safety standards (GMP, ISO, HACCP) Leadership and team management capabilities Good communication and problem-solving skills Proficiency in MS Office and production software (ERP/MES preferred) Preferred Qualifications: Prior experience in any FMCG INDUSTRY

Role & responsibilities of Mixers / Carbon transfer System / Bale Cutters in any reputed Tyre Industry with corresponding knowledge in Hydraulics for maintenance of Mixers with added knowledge in Extrduers/ 4 roll Calender is also favorable. Preferred candidate profile He will be assigned as section Manager taking responsibilities of all mechanical maintenance activities related to Mixers / Carbon transfer systems having abilities to manage his team of engineers and workmen available .He should have the knowledge on all corresponding Hydraulics related matters pertaining to Mixers in order to troubleshoot and resolve breakdowns, Carrying out systematic Preventive/ Breakdown maintenance in order to ensure equipment availability in good health at all times for production. All down times to be achieved below target levels so as to ensure no loss of production by ensuring good reliability and consistency of all equipment. Manage and maintain documents as per IATF 16949 requirements

Role & responsibilities The Production Manager is responsible for overseeing the day-to-day operations of the production floor in manufacturing environment. The role involves managing a team of production operators, ensuring that production targets are met in a timely and efficient manner while maintaining the highest standards of safety, quality and regulatory compliance. production activities, in shifts, to ensure production process runs efficiently. Ensure production schedules are adhered to and adjust workflows when necessary to meet production / service output deadlines. Monitor shift / daily production output, troubleshoot production-related problems and implement effective solutions quickly. Escalate 4M related gaps to Factory Manager. and engagement, assign tasks to team members according to skills and production needs.performance reviews and provide feedback to staff, recognizing good performance and addressing any issues or concerns. Ensure that all products are manufactured in compliance with established quality standards & regulatory requirements Preferred candidate profile

For a Coated Fabrics Plant Head role, here are the key Roles & Responsibilities you should expect: Plant Operations Oversee endtoend coated fabric manufacturing (PVC, PU) Maintain production schedules and output as per targets Ensure equipment (coaters, laminators, dryers) is properly run and maintained Technical & Quality Oversight Maintain coating quality standards and adherence to QMS Lead trials for new products or coating formulations Ensure compliance with safety, quality, and environmental norms Team Leadership – Lead and train production, engineering, and QA teams – Maintain discipline, productivity, and multiskill training Cost & Efficiency Optimization – Monitor material usage, waste, and energy efficiency – Identify and implement process improvements (5S, Kaizen, Lean) New Product Development & Technical Support – Develop new coating applications and collaborate with R&D – Provide technical support to sales and marketing as required Language - Tamil***

Role & responsibilities: a) Ensure safety of Human, equipment and environment. b) Comply the standard of requirement for AIMS (Arkema Integrated Management System) and corporate standards & policies c) Execute Instrumentation maintenance tasks of DCS, PLC, Analysers & Field Instrumentation etc. with quality. d) Improve safety of Peroxides in transport -- implement best practices. e) Knowledge in Emerson DCS, Siemens PLC for trouble shooting and maintenance work. f) Review Maintenance activities and prioritize critical jobs. Carried out scheduled and chance-based maintenance of instrumentation equipment. g) Ensure compliance to standards, procedures and best practices. h) Conduct regular troubleshooting and root cause analysis. i) Facilitate and support for minor projects j) Assist Manager in spares inventory management to maintain stock levels & issuing spares for job execution. k) Assist Manager in Shutdown planning, budgeting and execution. l) Carry out risk assessment and adhere to all the safety norms in routine and shutdown jobs. m) Participate reliability & integrity studies as identified. n) Implementation of recommendation. o) Execute PM as per schedules. p) Carry out regular plant visit to identify potential failure. q) Maintain History/records. r) Preparation of maintenance KPIs of Instrumentation. s) Maintain IMS documents for Instrumentation maintenance. Providing technical guidelines, training to subordinates.

Hiring for DCS Operator for a French based MNC at Cuddalore location.

We are looking for an experienced Oil Chemistry Specialist to oversee quality control, process optimization, and energy efficiency in our chemical plant . The ideal candidate must have strong expertise in Pal oil & its derivatives such as PFAD, PKFAD, RBD Stearin, Hard Stearin, and Hard PFAD and their splitting (hydrolysis) and distillation processes . Key Responsibilities: Monitor and optimize splitting (hydrolysis) and distillation processes for palm oil derivatives. Ensure quality control of oils and fatty acid products through lab testing and process checks. Analyze fatty acid composition, IV (Iodine Value), SV (Saponification Value), FFA (Free Fatty Acids), and moisture levels . Work closely with the production team to improve plant efficiency, reduce losses, and optimize energy consumption . Troubleshoot process deviations and suggest corrective actions for maintaining product consistency. Ensure compliance with industry quality standards (ISO, GMP, etc.) . Collaborate with maintenance and operations teams to enhance equipment performance and minimize downtime. Develop and implement cost-saving initiatives related to raw materials and utilities. Train plant personnel on best practices for oil processing, quality control, and safety protocols . Familiar with SAP QM Module for the entire Quality Process Management of Product dossier/ Standards/ All Quality Records Required Qualifications & Experience: Bachelors degree in Oil technology, preferably from HBTI Kanpur 5+ years of experience in chemical plant operations, focusing on palm oil processing and derivatives . Strong knowledge of splitting, distillation, refining, and fractionation processes . Hands-on experience with process control, quality testing, and energy optimization . Proficiency in analytical testing techniques (GC, HPLC, titration, etc.) for oils and fatty acids. Preferred Skills: Expertise in fatty acid processing, glycerin recovery, and quality enhancement . Ability to identify and implement process improvements for cost and energy savings. Strong troubleshooting skills for chemical plant operations . Experience in working with plant utilities (steam, vacuum, heat exchangers, etc.) . Excellent communication and coordination skills with production and maintenance teams. Why Join Us? Opportunity to work in a state-of-the-art chemical plant with cutting-edge oil processing technologies. Be part of a high-performing team focused on quality and operational excellence. Contribute to cost and energy efficiency initiatives for a more sustainable operation.

Position : Senior Executive / Assistant Manager Production Location : Gummidipoondi SIPCOT, Tamil Nadu Qualification : B.E. / B.Tech Mechanical Engineering Experience : 6–12 Years (Preferably in Technical / Industrial / Commercial Textiles) Roles & Responsibilities (R&R): Production Management Plan, schedule, and execute daily production activities for coated fabric lines. Monitor productivity, efficiency, and output against defined KPIs. Ensure optimum utilization of man, machine, and materials. Process Control & Optimization Implement and monitor coating process parameters to ensure consistent quality. Identify process bottlenecks and apply continuous improvement tools (Kaizen, 5S, QCC). Design & Technical Interface Coordinate with design/R&D team for product development or customization. Interpret design drawings and implement technical changes in production processes. Quality Assurance Ensure adherence to quality standards in line with product and customer requirements. Collaborate with QA/QC for root cause analysis and corrective actions for non-conformities. Team & Shift Management Lead and guide shop floor teams, manage shifts, allocate tasks, and ensure discipline. Conduct training for operators on machinery, safety, and quality standards. Documentation & Reporting Maintain daily production reports, downtime logs, and MIS reports. Ensure documentation related to SOPs, process parameters, and audits is up to date. Maintenance Coordination Liaise with the maintenance team for timely machine servicing and breakdown resolution. Provide feedback for preventive maintenance planning. Compliance & Safety Ensure adherence to statutory, environmental, and workplace safety norms. Implement safe practices in coating and handling chemicals or solvents, if applicable.

Role & responsibilities * Basic level of PLC programming on Allen-Bradley and Siemens platform . * At least 4 years of experience in SW and HW fault-finding in Allen-Bradley and Siemens environment including servo drives. * Up keeping of Extruder/Mixing and Stock area machines through PM / horizontal implementation of preventive actions. * Up keeping of Extruder/Mixing and Stock area machines through PM / horizontal implementation of preventive actions. Ensure the 100 % of PM activity in Mixing /Extruder area

To develop the business of a designated product group through a set of dealers in the territory. • Manage the commercials like collection, credit notes, C forms etc. • Ensure quality merchandising and stocking in dealer and sub-dealer networks. • Implement schemes and other Business Development Activities in the territory. • To achieve set targets. • Ensure proper service to all dealers. • Map small projects in his territory and ensure the range is sold into these projects. • To develop relationships with industry influencers like Architect/Interior designers/Plumbing consultants/Plumbers etc.

Role & responsibilities Preferred candidate profile

Role & responsibilities Analyze industry, market trends and consumer behaviour for respective category Leverage the above and develop product roadmap & long term go-to-market strategy Managing product portfolio - pricing, promotions, and inventory to optimize category performance Ownership of P&L, Sale planning (enablers), Inventory Management & Marketing to achieve goals, Product NPI Collaborating with various teams like product development, marketing, sales and to identify and implement new products, services and marketing Stakeholder Management - HQ team, Quality, Sales Channels, Marketing, Finance, SCM, AS and CS Drive discussions on innovative ideas and best practices across teams & competition, fostering a culture of continuous improvement and innovation. Conduct market research to identify new trends, product opportunities, and competitive offerings. Drive impactful social media campaigns, leveraging analytics and trend analysis to enhance brand visibility. Drive Product Life Cycle Management including determining product positioning & messaging, pricing strategies, product launches, consumer demand forecasting, competitor tracking, develop channel strategy and manage channel conflicts, market sensing & action for sellout management Preferred candidate profile

Role & responsibilities Utility Operations & Maintenance: Perform routine preventive and corrective maintenance on utility equipment such as: Boilers (steam generation systems) Air compressors Chillers and HVAC systems Cooling towers Pumps and motors Water treatment (RO, DM, Softener plants) Effluent and Sewage Treatment Plants (ETP/STP) Monitor utility performance and ensure optimal operation with minimal downtime. Maintain operating logs, checklists, and equipment history records. 2. Troubleshooting and Repairs: Diagnose faults and coordinate repairs during equipment breakdowns. Maintain spares inventory and ensure availability of critical components. Liaise with external vendors or OEMs for major repairs or service contracts. 3. Compliance & Documentation: Ensure utilities are operated in compliance with environmental and safety regulations (e.g., GPCB, CPCB, Boiler Act). Maintain documentation for audits including ISO, GMP, or internal quality systems. Support energy audits and implement energy-saving initiatives. 4. Safety & Best Practices: Follow and promote plant safety standards and maintenance SOPs. Participate in root cause analysis (RCA) for incidents and equipment failures. Conduct safety inspections and support permit-to-work (PTW) procedures.