Role & responsibilities Shall receive the piping spools and Structural components at the Blast cleaning Shop. Should be knowledgeable on Surface Preparation Standard ( e.g., SA 2.5) Tracking & managing the Automatic & manual Shot blasting facility, Executing Primer and subsequent coats of paint as per specifications. Ensuring quality of blasting &proper DFT application of paints. Dispatch of painted components to Storage Yard with tracking Preferred candidate profile Perks and benefits

Role & responsibilities Work Experience in Petrochemical/Oil & Gas industries or Power projects is mandatory. Basic overview knowledge of P&ID or Line Schedule to understand insulation requirement. Must have experience in supervising the insulation works (2+ years). Must have knowledge of all the insulation types & its specifications. Must have experience in inspection, modification, repair , optimized usage of insulation materials and its reconciliation. Planning and Preparation of Schedule for insulation works & monitoring. Co-ordination with vendor, client and other inter discipline team for the smooth execution of insulation works. Must know the inspection procedure & measurement methods for insulation works. Preferred candidate profile Perks and benefits

Role & responsibilities Academically good, sound in Construction Knowledge and with a go getter attitude. Report to the E&I Lead for all construction activities and is based at site. Must have good interpersonal and leadership skills to lead a team to achieve set project targets and to ensure the effective performance of the team. Minimum of 6-9 years of experience in construction of instrumentation works in Oil and Gas Industries, out of which minimum 5-8 years should be in installations of major project equipment and systems. This should include Calibration, Erection, cable laying, instrumentation piping and tubing works. Knowledge of Loop checking, hydro/pneumatic testing and commissioning of complete Field Instrumentation and Control System will be an added advantage. Planning-Material & Installation, Cost control, Reconciliation activities of Instrumentation works. Instrumentation and Control system works including PLC/DCS and SCADA system for large refinery, petrochemicals and pipeline projects. Independently Handling Instrumentation scope of works in Refinery process plant experience, with track record for HSE leadership. Prior experience in role of Instrumentation Engineer for more than 5 Years, with on Time Delivery inside an operating plant or other 'brownfield' environment with a focus on minimizing disruption of ongoing operations. To complete the CCR/ SSR and plant works for large refineries and petrochemical projects, with delivery of the Project within the Budgeted Cost and Time. Candidate should have extensive knowledge and experience in project/activity scheduling and interpreting cost reports for cost control tracking and intervention. Experience in the interpretation and application of National and other relevant International codes and standards. Equipment erection, plant cable laying, testing and commissioning of all Instrumentation equipment. Co-ordination among the various disciplines at site, engineering team, vendors, Sub-contractors, PMC for timely release of work fronts and execution of Instrumentation works in line with scheduled targets. Planning of material, resources, execution, cost control and reconciliation activities of Instrumentation works with Subcontractor, central planning and PMC. Ensure to achieve the project objectives in line with HSES, quality, cost and schedule requirements. Be proactive to avoid problems that may impact schedule or budget. Front analysis and daily, weekly and monthly plan and targets. Experience in scheduling of projects to meet project milestones and maintain construction resources to acceptable levels. Monitor progress of field activities to ensure scheduling milestones and understanding critical path for delivery on committed dates. Review sub-contractors work performance and drive focus on Quality of Work and a Strong Safety Culture. Ensure all Project Safety management (PSM) and Management of Change (MOC) requirements. Strict monitoring of field design modifications and scope changes and ensure forwarding appropriate documentation to the central planning team. Active coordination with Site, proactively anticipate and resolve problems encountered in the field to prevent costly rework or retesting. Preferred candidate profile

Role & responsibilities Production Engineer / Quality Engineer Preferred candidate profile

Role & responsibilities Sales&marketng Preferred candidate profile Perks and benefits

Role & responsibilities We are seeking an experienced and detail-oriented Senior Instrumentation Engineer with 7 to 10 years of expertise in Material Requisition (MR), Field Instrument Specifications, Datasheet Preparation, Technical Bid Evaluation (TBE), and Vendor Document Review (VDR). Candidates with additional experience in Control Valve MR, TBE, and VDR will be given preference. Key Responsibilities: Prepare Material Requisitions (MRs) for a wide range of field instrumentation including pressure, temperature, flow, level transmitters, switches, and analyzers. Develop and review instrument datasheets and technical specifications in accordance with project, client, and international standards. Perform Technical Bid Evaluations (TBE) for field instruments and control valves (globe, butterfly, ball, segmental, etc.). Evaluate vendor offers for technical compliance with specifications, project documentation, and applicable standards. Review and comment on Vendor Documents (VDR) for field instruments and control valves, ensuring timely turnaround and quality compliance. Coordinate with vendors and procurement to resolve technical queries during the pre- and post-order stages. Interface with Process Engineers for control valve sizing and selection. Ensure correct selection of control valves considering process data, noise levels, cavitation, rangeability, body/trim materials, and actuator sizing. Support FAT, SAT, and vendor meetings as necessary. Adhere to international codes and standards (ISA, API 6A/6D, IEC, ASME, etc.) and ensure compliance with SIL and hazardous area classifications. Mentor junior engineers and contribute to continuous improvement of departmental processes and standardization. Requirements: Bachelors Degree in Instrumentation / Electronics / Control Engineering or related field. 7–10 years of relevant experience in instrumentation engineering within EPC/EPCM projects. Strong expertise in field instrument and control valve selection, sizing, and procurement processes. Solid knowledge of international standards (ISA, IEC, API, ASME, ANSI). Proficient in reading and interpreting P&IDs, instrument data sheets, and loop diagrams. Experienced in handling complete instrumentation procurement cycles — MR, TBE, VDR. Excellent communication and coordination skills with multidisciplinary teams and vendors. Preferred candidate profile

Role & responsibilities We are seeking an experienced S3D Modeler specializing in Instrumentation to join our Engineering team. The successful candidate will be responsible for creating and maintaining accurate Smart 3D (S3D) models related to instrumentation systems for industrial and plant design projects, ensuring compliance with industry and client standards. Key Responsibilities: Develop and maintain 3D models of instrumentation systems using Intergraph Smart 3D (S3D) software. Model field instrumentation, junction boxes, cable trays, tubing, and instrument supports in S3D. Coordinate and integrate with piping, electrical, mechanical, and civil disciplines within the 3D environment. Generate and extract instrument location plans, cable tray layouts, loop routing, and isometrics from the model. Ensure that all modeling work aligns with project requirements, specifications, and client standards. Update and revise models as per engineering markups and design changes. Interface with the Instrumentation Design Engineer for technical inputs and clarifications. Support clash detection and resolution processes using S3D and other design tools. Maintain quality and accuracy of the model database, including component tagging and metadata. Assist in preparing material take-offs (MTOs) and BOQs from the S3D model. Requirements: Diploma or Degree in Instrumentation Engineering or a related technical field. 47 years of experience in instrumentation design/modeling, with strong proficiency in Intergraph Smart 3D (S3D) . Hands-on experience in large-scale oil & gas, petrochemical, or industrial plant projects. Understanding of instrumentation standards such as ISA, IEC, and project-specific requirements. Ability to read and interpret P&IDs, loop diagrams, and vendor drawings. Experience working in a multi-discipline 3D environment. Preferred candidate profile

Role & responsibilities Having rich experience of construction execution, related to High pressure piping in refinery and petrochemical industry. Oversee the design, installation, and execution of high-pressure piping systems. Oversee the Installation and execution of high-pressure piping systems. Ensure compliance with EIL/IOCL standards, safety regulations, and project specifications . Coordinate with cross-functional teams to meet project deadlines. Conduct site inspections and provide technical guidance. Review and approve technical documents, drawings, and material specifications . Manage and resolve technical issues that arise during execution. Prepare project status reports and present updates to stakeholders. Implement quality control measures to ensure the integrity of piping systems. Identification of Loop for High Pressure piping & conduct hydrotesting safely and as per standards. Having knowledge of Grayloc installation & handling. Strong knowledge of ASME, ANSI, API, and other piping codes . Having Knowledge in AutoCAD and piping design software. Proven experience in project management and execution . Excellent analytical and problem-solving skills . Strong leadership and communication abilities . Skills Required: Technical Documentation Site Inspection & Compliance Safety Standards & Regulations Leadership & Team Coordination Preferred candidate profile

Role & responsibilities Develop & Execute Strategic Procurement Plans Manage Supplier Relationships & Negotiate Contracts Conduct Market Analysis to Identify Cost -Saving Opportunities Ensure Timely Delivery of Materials & Services Implement & Maintain Procurement Policies and Procedures Collaborate with Cross-Functional Teams to Optimize Supply Chain Processes. Monitor and Report on Procurement metrics & performance Desirable: Proven Track Record of Successful Supplier Negotiation & Relationship Management Strong Analytical and Problem-Solving Skills Excellent Communication and Interpersonal Abilities Preferred candidate profile

Role & responsibilities SAP must. Strong Analytical and Problem-Solving Skills Excellent Communication and Interpersonal Abilities Preferred candidate profile

Role & responsibilities Minimum 15 years of experience in a thermal power plant with a strong background in C&I systems. 2. Extensive experience working with Siemens PLC systems (S7300/400, PCS7). 3. Proven experience in field instrumentation (transmitters, sensors, etc.) and actuator commissioning. Skills: 1. Proficiency in Siemens PLC programming and troubleshooting. 2. Strong understanding of field instruments and their integration with control systems. 3. Excellent knowledge of control systems, process automation, and instrumentation. 4. Ability to work independently in shift operations and under pressure. 5. Strong problem solving skills and attention to detail. Additional Competencies: 1. Good communication and teamwork skills. 2. Ability to interact with multidisciplinary teams and manage vendor relationships. 3. Familiarity with safety standards and best practices in the power generation sector. Preferred candidate profile Key Responsibilities Operation & Maintenance: 1. Responsible for the operation and maintenance of control and instrumentation systems in a thermal power plant. 2. Perform preventive, corrective, and breakdown maintenance of Siemens PLC systems and related automation equipment. 3. Monitor and ensure proper functioning of DCS, PLC, and other C&I systems during shift operations. Shift Operations: 1. Manage and oversee shift operations, ensuring smooth functioning of C&I systems and coordinating with other departments (electrical, mechanical, and operations teams). 2. Act as a point of contact during shifts for any technical issues related to instrumentation and control systems. PLC & Automation: 1. Experience with Siemens PLC programming, modification, and system integration. 2. Analyze and optimize control loops, implementing changes and improvements to enhance plant performance and efficiency. Commissioning: 1. Plan, execute, and document commissioning activities for new C&I equipment and systems, ensuring proper functionality in line with project specifications. 2. Collaborate with contractors and vendors during the installation and commissioning phases. Field Instruments & Actuators: 1. Expertise in the installation, calibration, testing, and commissioning of field instruments including temperature, pressure, flow, and level transmitters. 2. Lead the commissioning and troubleshooting of electrical and pneumatic actuators used in valve operations and other control systems. 3. Diagnose and rectify faults in field instrumentation, ensuring minimum downtime. Documentation & Reporting: 1. Maintain accurate logs of shift activities, maintenance work, and equipment performance. 2. Prepare reports on system health, incidents, and corrective actions taken. Preferred candidate profile

Role & responsibilities Prepare and execute the commissioning, trial run, acceptance testing and inspection/measurements works defined by the Lead Electrical Com Eng and the Commissioning Manager. Participate in site meetings by arrangement with Lead Electrical Com Eng and the Commissioning Manager. Utilize all available tools and aids to achieve the goals of his/her assignment and, as well, to strive for continuous product improvements and cost reduction. Prepare, manage, perform, coordinate and monitor the commissioning of the specified systems in a safe and timely manner Perform commissioning as per specifications, engineering documents taking into account the safety instructions, environmental protection measures and local regulations. Organize and supervise the safe operation of the plant (site rules, safety regulations, shift plan, shift log, etc.) from system turnover from Installation until COD by arrangement with Lead Electrical Com Eng and the Commissioning Manager. Facilitate the turnover of systems from Installation to commissioning and from commissioning to the customer in accordance with current procedure/work instruction by arrangement with Lead Electrical Com Eng and the Commissioning Manager. Work off the open item lists of systems under his/her responsibility by arrangement with the Lead Electrical Com Eng and the Commissioning Manager. Ensure the commissioning, operation, quality record and feedback documentations are issued. Hand over the commissioning, quality and feedback documentation and software (originals) with a document list to the Lead Electrical Com Eng and the Commissioning Manager for compiling and release. Ensure that commercial and technical deviations are reported with a corresponding quality record and that the same are followed up until their completion by arrangement with the Commissioning Manager / Site Manager. Keep a diary to record daily work, occurrences, problems, special information, etc. plus a list of pending items and maintain logbooks of commissioning records and operational events as specified in the work instructions by arrangement with the Lead Electrical Com Eng and the Commissioning Manager. Provide, by assignment completion, a Site Report and forward the same to the Lead Electrical Com Eng and the Commissioning Manager. Provide, on request, technical experience feedback to project engineering departments during debriefing meeting(s) to be organized by the project. Manage the handling and inspection of the commissioning test equipment. Organize the return of all commissioning test equipment as soon as possible by arrangement with the Lead Electrical Com Eng and the Commissioning Manager. Implement of the necessary EHS procedures within the scope of the discipline works to include preparation of method statements, risk analyses, safety walks, toolbox talks etc. Ensure within the scope of the discipline works that subcontractors are in compliance with the EHS requirements at the site. The technical expert during pre-commissioning and commissioning of the Electrical Systems Responsible for the commissioning and pre-commissioning of the Electrical Systems Organizes generator tests with customer Perform necessary investigations and/or escalations to avoid repeat trips. Establish testing materials and gap between needs and availability. Execute and support all required testing i.e. Functional loop checks, protection secondary injections, generator short circuit and open circuit test , synchro, load testing. Preferred candidate profile

Role & responsibilities eview and evaluate the applicable codes, standards and specifications based on projects requirement. Participate in Management Review Meeting. Prepare minutes of meetings. Review, and monitoring of the Project Quality Plan implementation and its compliance with the specific project requirements, technical specifications, and the applicable codes and standards. Document review sheets shall be prepared for each the site related QA&QC documents. Review all site material inspection acceptance and non-conformance reports (NCR). Handling NCR, surveillance issues and keeping track records. Monitoring RFI (Request for Inspections) status and support Site Manager in daily coordination Review, approval, and monitoring of the implementation of Inspection and Test Plan (ITP). Review and approval for field QC documents like Request For Inspection, Field Inspection & Testing Report Forms etc. Review and approval for WPS, PQR. Review and approval of NDT, PWHT, Hydro test procedures. Review & approval of material and equipment storage and preservation procedure. Review of QA/QC involvement in the Method Statement and Job Safety Analysis (JSA). Review of and keep up to date Punch list status. Review of Calibration Certificates. Review of ECC / CCC and Turn Over Packages and regularly monitor status / completion. Witness of WQT Organizing QA/QC Training program. Planning, organizing & leading the periodical AUDIT (as per ISO 9001: 2008). Attend daily, weekly and monthly meeting. Establish direct communication with Contractors QM Stay informed about changes in regulations and standards, ensure that the project complies with all applicable laws and regulations. Preferred candidate profile

Role & responsibilities Site Supervision Oversee daily civil works at the site, ensuring adherence to design and safety norms. Monitor and coordinate site activities related to foundations, RCC, steel structures, flooring, drainage, etc. Ensure timely execution as per project schedules. Quality Assurance Check the quality of materials and workmanship as per specifications. Raise quality issues and corrective actions with contractors and site engineers. Labour & Contractor Management Manage workforce and subcontractors on-site. Allocate work and ensure targets are met. Maintain discipline and safety among site workers. Measurement & Documentation Record daily work progress, labour deployment, and material consumption. Prepare and maintain site diaries, checklists, and inspection records. Assist in bill checking and quantity surveying. Safety Compliance Ensure all workers follow safety protocols and use PPE. Report unsafe acts or near misses immediately. Coordination Liaise with project engineers, vendors, and consultants for smooth execution. Attend site meetings and update progress. Key Skills Required Technical Skills Knowledge of civil engineering basics (RCC, masonry, shuttering, concreting, etc.) Familiarity with industrial building codes and standards. Reading and interpreting civil drawings (layout, structural, architectural). Tools & Software MS Excel for reporting. AutoCAD (viewing plans). Leveling instruments (Dumpy Level, Theodolite). Soft Skills Strong communication and interpersonal skills. Leadership and decision-making at site level. Time management and multitasking ability. Regulatory/Compliance Knowledge Basic knowledge of labour laws and site safety regulations. Familiarity with statutory norms (Factory Act, Pollution Board norms, etc.) Educational Qualification Diploma or ITI in Civil Engineering (minimum) Bachelor's degree in Civil Engineering is a plus but not mandatory for supervisor roles. Desirable Certifications Safety Supervisor Certification (e.g., from NSDC or DISH). First Aid or Fire Safety Training.

Role & responsibilities Develop and implement strategic business growth initiatives Identify and pursue new business opportunities across diverse markets Build and maintain relationships with potential and existing clients Analyze market trends and competitive landscapes Create comprehensive business proposals and presentations Collaborate with cross-functional teams to align business development strategies Preferred candidate profile

Role & responsibilities Understand our product/services technical features, functionalities and benefits. Study customer needs, pain points and business challenges and create a customised sales proposal with the sales team. Conduct product demonstrations to showcase key features and functionalities and address technical questions and concerns from customers. Provide pre-sales support by answering technical inquiries and participating in sales meetings. Liaise with the engineering or technical team to address technical concerns or requirements. Develop and deliver technical documentation, including user manuals, technical specifications and product training sessions. Collaborate with internal teams to gather technical requirements and ensure the successful implementation of solutions. Provide post-sales support to customers, including technical troubleshooting and customer training, ensuring their satisfaction with the product or service. Give active feedback and insights from the market to the product development and marketing team. Participate in sales meetings, trade shows and industry events to promote our products or services. Stay updated on industry trends, market dynamics and competitor offerings. Preferred candidate profile

Role & responsibilities 1 Lead a role is Project Engineer 2 Need to Conduct and Do the APQP Meeting and Activity 3 Day to Day interaction with Customer 4 Execute the project plan 5 Need Good Interaction with Internal CFT and All the Team 6 Supplier Negotiation skills and Time plans 7 Costing of part and Moulds added advantage 8 Knowledge in plastic moulding industries and Mould Manufacturing 9 Capable to handle the ECN/ECR 10 Knowledge of VAVE activity 11 Process knowledge / SPM Development knowledge 12 Knowledge of Plastic Raw materials 13 PPAP , Quality plan and drawing reading skills 14 To Be hands on Microsoft Office Excel , Word, PPT, .. 15 SPM Part or product write up of process and sequences and understand the SPM Concepts 16 Communication skills Speak & Write English Tamil Speak & Understand Hindi Preferred candidate profile

Key Responsibilities Thorough knowledge and hands on experience of piping specification, fabrication, and erection techniques Development of Piping Schedule in line with master Schedule & Front release plan in consultation with E&P. Estimation of Resources & reduction of rework; productivity improvement. Manage the construction activities and execute the construction works in line with the approved contract schedule and specifications. Develop and implement the requirements of the Construction Execution Plan. Ensure adherence to the project/corporate HSE procedures and maintaining a safe working environment. Responsible for generating regular progress reports for review by Management. Monitoring subcontractor and vendor performance and contributes to project evaluation of these in project close-out reports. Ensure that the construction areas are constructed to international quality standards and agreed budget, schedule, and construction sequence. Knowledge on Implementation of construction work pack (CWP) is preferred, Ensure compliance of manuals, procedures, and systems. Manage the Piping Construction team creating an atmosphere of cooperation and team spirit. Develop the staff so that every supervisory position has a Deputy able to stand in for absences and rotation leave. Identifying and mentoring high potential personnel and recent college/university graduates and allowing training time. Representation in all meetings with clients and subcontractors responsibly Ensure healthy & cordial relations with clients throughout project. Cost Control & Billing Certification (Client & Subcontractors) for Piping Co-ordination with Material & Consumable Procurement. Reconciliation of Material and Billing quantity. Preferred candidate profile

Role & responsibilities Responsible for performing piping design activities using CAD modelling (E3D / S3D) and 2D (AutoCAD /MicroStation) drafting systems. • Hands on exp. of SP3D / E3D Modelling, Support Modelling & related drawings. MTO extraction from SP3D/E3D 3D tool Required Candidate profile Responsible for performing piping design activities using project approved in house” 3D CAD modelling (E3D / S3D) and 2D (AutoCAD / MicroStation) drafting systems Preferred candidate profile

Role & responsibilities Position: BRANCH MANAGER (SALES) MALE Desired Qualification: Graduate in Engineering / Diploma with 8 to 10 Years experience Job Overview: We are looking for a Branch Manager to lead our Vadodara branch. You will be responsible for managing daily operations, leading the team, growing business, and ensuring excellent customer service. Key Responsibilities: Team Management: Hire, train, and manage branch staff. Set goals and monitor performance. Business Growth: Achieve targets for savings accounts, loans, and other banking products. Cross-sell insurance, mutual funds, etc. Customer Service: Ensure smooth service and resolve customer issues quickly. Operations & Compliance: Handle day-to-day branch operations. Ensure compliance with banking rules and internal policies. Audit & Risk: Maintain proper records. Get high ratings in audits. Local Marketing: Build relationships in the local market to bring in new customers. ASSISTANT MANAGER (SALES) MALE Desired Qualification: Graduate in Engineering / Diploma with 5 to 8 Years of experience Job Overview: We are looking for an energetic and responsible Assistant Manager to support daily operations, team coordination, and business targets at our Delhi location. You will help the Manager run the team, ensure smooth processes, and meet performance goals. Key Responsibilities: Team Support: Assist the Manager in supervising staff, setting targets, and ensuring smooth day-to-day functioning. Customer Service: Handle customer queries and complaints with professionalism and ensure high satisfaction. Sales & Business Growth: Support in achieving sales targets for products or services. Help in cross-selling and upselling. Operations: Ensure timely completion of reports, data entry, and backend support work. Compliance & Reporting: Maintain proper records and follow company policies. Support audit and quality checks Position: SALES ENGINEER MALE Desired Qualification: Graduate in Engineering / Diploma with 1 to 3 Years of experience Job Overview: We are looking for a Sales Engineer who can combine technical knowledge with strong sales skills to promote and sell our products/services. You will work with clients to understand their needs, recommend solutions, and support the sales process from start to finish. Key Responsibilities: Product Knowledge: Understand technical details of products and explain them to customers. Client Interaction: Meet with clients, understand their requirements, and offer suitable solutions. Sales Targets: Achieve monthly/quarterly sales goals by identifying and converting leads. Presentations & Demos: Give product demos, presentations, and training to clients. Quotations & Proposals: Prepare technical proposals and pricing based on client needs. After-Sales Support: Provide basic technical support and ensure customer satisfaction after the sale. Preferred candidate profile