Financial Planning & Analysis Job Level: Deputy Manager / Manager Location : Adibatla, Hyderabad Qualification & Experience: CA/CMA/MBA with 6-8 years of post-qualification experience Job Responsibilities: Preparation & Tracking of Annual Operating Plan (AOP) Preparation of monthly MIS with detailed analysis on Revenue & Cost (Rate variance, Volume variance) Detailed analysis of working capital on monthly basis. Preparation of Forecast/Estimates on quarterly basis for P&L and Balance sheet Preparation for Board & Leadership meetings Facilitate financial reviews with business groups and work with functional leads to ensure the effective finance and cost management Review of GL and Cost center accounting Support BD & Program teams for the new businesses Work with cross functional teams on the business reasons for the Cost & Revenue variances Support in statutory audits on the Revenue & Cost analysis Sharing of monthly Dash boards like TOC, Finance score card, Corporate reports etc. Rate forecast for the new proposals Essential Requirements: Interpersonal and communication skills with the ability to interact with functional leads Working knowledge of Manufacturing industry Experience developing financial reports and metrics Advanced technical skills in Excel, Power point presentation Show more Show less
Engineer/Sr. Engineer - Methods/Process/Manufacturing Engineering Qualification: BE/BTech/MTech - Mechanical (Equivalent streams) Experience: 2 - 7 years Work Location : Jigani, Bengaluru Roles & Responsibilities: Preparation & release of process planning documents like MIS, Route card, PD, MOS, HWI, visual aids and other engineering documents for approved projects to implement FPQ / FAI as per the agreed timelines. Raise indent to purchase department for procurement of raw materials, consumables, cutters, hand tools or CAPEX equipment required during FAI / LSP. Prepare & release the requirement generation documents like EBOM, PBOM, SAP BOM. Update for FPQ / FAI as per timelines. Study & implement continuous improvement activities related to raw materials, consumables, cutters, cycle time reductions, suggestions for process, design improvements in the respective programs. Knowledge of GD&T requirements, CATIA, 3D VIEWER, MS OFFICE, SAP working on MM, BOM and routing creations. Candidates should have knowledge on Composites manufacturing process.
The Executive Ground Control Systems position based in Bangalore requires candidates with a B.Tech / M.Tech in CSE / ECE only. The ideal candidate should have 2-3 years of experience in HMI, QT, and QML. Key responsibilities for this role include: - Proficiency in C/C++ programming on QT and IDE - Experience in Windows and Linux development - Developing GUI / HMI using QT and QML - Exposure to model-based development If you meet the educational qualifications and experience requirements, and have a strong background in the mentioned technologies, this role could be a great fit for you.,
As a Senior Executive in Electronics Hardware Design, you will be responsible for the design, development, testing, and qualification of products according to the defined technical specifications of defence projects. Your key responsibilities will include designing Analog & Digital circuits, especially Microprocessor & Microcontroller based circuits. You should have experience in schematic design using tools like ORCAD, Altium, or similar equivalents. Additionally, you will be involved in component selection & codification, as well as understanding and reviewing layout tools such as Orcad or Altium. To excel in this role, you should possess knowledge of communication protocols like UART, USB, Ethernet, I2C, and SPI. A basic understanding of computers and their peripherals will also be beneficial. Desirable attributes for this position include familiarity with COM Express, PCIe, HDMI, FPGA, VME, VPX Form factor, and surveillance systems. This position is based in Electronic City, Bengaluru, and requires educational qualifications of B.E./ B.Tech/ M.E./ M.Tech with a desired work experience of 2 to 6 years. If you are looking for a challenging role where you can contribute to cutting-edge defence projects, this opportunity is for you.,
Role – Quality Assurance - Unmanned Aerial Vehicles Location : Bengaluru Educational Qualification : B.Tech / M.Tech (Electrical / Electronics ) Only Exp Level : 2 – 4 Years Responsibilities: Final inspection of a UAV System and clearance for dispatch. Supporting on field activities for UAV flight testing and monitoring for any deviations and providing feedback. Execution/Inspection of Functional testing (FT) at module level and system level of UAV. Identify and document non-conformances. Responsible for conduction of Root cause analysis (RCA) and take Corrective actions (CA) on time Reviewing ATPs (Acceptance Test Plans) and other documents to meet testing criteria. Strong knowledge of AS9100D and adherence to the process followed as per QMS (Quality Management Systems) and support in conducting Internal audits and follow up for closure of audit findings Awareness of IPC/WHMA 620 standard to monitor Harness fabrication. Troubleshooting the problems encountered with strong knowledge of the UAV systems. Strong knowledge of Harness, Avionics and interface of the system (UAS). Strong Knowledge on Problem Solving tools like 5Why, 7QC tools and 8D Problem solving technologies. Support conducting MRB meetings and initiation of actions taken like SCRAP, RTV etc. Monitoring the daily process activities and maintaining data/report on daily basis. Ready to support different locations (within Bangalore) based on the requirements. Excellent written and verbal communication skills. Strong analytical and problem-solving abilities.
Role Quality Assurance - Unmanned Aerial Vehicles Location : Bengaluru Educational Qualification : B.Tech / M.Tech (Electrical / Electronics ) Only Exp Level : 2 4 Years Responsibilities: Final inspection of a UAV System and clearance for dispatch. Supporting on field activities for UAV flight testing and monitoring for any deviations and providing feedback. Execution/Inspection of Functional testing (FT) at module level and system level of UAV. Identify and document non-conformances. Responsible for conduction of Root cause analysis (RCA) and take Corrective actions (CA) on time Reviewing ATPs (Acceptance Test Plans) and other documents to meet testing criteria. Strong knowledge of AS9100D and adherence to the process followed as per QMS (Quality Management Systems) and support in conducting Internal audits and follow up for closure of audit findings Awareness of IPC/WHMA 620 standard to monitor Harness fabrication. Troubleshooting the problems encountered with strong knowledge of the UAV systems. Strong knowledge of Harness, Avionics and interface of the system (UAS). Strong Knowledge on Problem Solving tools like 5Why, 7QC tools and 8D Problem solving technologies. Support conducting MRB meetings and initiation of actions taken like SCRAP, RTV etc. Monitoring the daily process activities and maintaining data/report on daily basis. Ready to support different locations (within Bangalore) based on the requirements. Excellent written and verbal communication skills. Strong analytical and problem-solving abilities. Show more Show less
We have an excellent opportunity for PPC engineer in our company Tata Advanced Systems. Below are the job details. Role : PPC Engineer (Contractual Role) Please note only candidate interested for contractual role can apply. Location: Vemagal, Kolar District Qualification: B.E/B.tech-Mechanical / Electronics/Electrical Total exp: 3-7 years Skills Required: Knowledge on planning skills, scheduling and Tracking. Knowledge on PPC process Knowledge on mechanical and Electronics components. Experience in SAP/ERP Job responsibilities : Developing and Implementing Production Schedules: Creating and maintaining production plans and schedules based on factors like demand forecasts, available resources, and customer orders. Coordinating with Various Departments: Collaborating with production, procurement, inventory, and quality control teams to ensure smooth workflow and timely execution of production activities. Analyzing Production Data: Tracking and analyzing production data to identify bottlenecks, inefficiencies, and areas for improvement in the production process. Maintaining Accurate Records: Keeping detailed records of production schedules, inventory levels, production costs, and other relevant data. Interested candidate who are keen to explore in PPC and have have experience in same can apply.
Production Supervisor Qualification: Diploma Experience: 2 to 6 years Job Description 1. Understanding the monthly/daily plan as per IMS and make sure targets are met. 2. Ensuring work practices such as CLC, Andon, PTAB etc. processes are being followed as per the documents and safety Requirement. 3. Ensuring Optimum resource utilization (Machine, Material and space) & continuous improvements (Kaizen, Poka yoke , Inventory control) 4. Publish the daily reports and highlight the areas of concern 5. Implement/track production activity, ensure that products meet quality standards as described into the work documents.
Function as a team lead / system designer & contributing to the hardware design, development, testing & qualification of the product as per defined technical specifications of defence projects. End to End product development & system lifecycle. Requirement gathering, system architecture design, system validation, EMI-EMC Testing. Experience of Schematic design using in ORCAD, Altium or equivalent tool Component selection & codification Understanding & review of the layout tools Orcad / Altium Knowledge of UART, USB, Ethernet, I2C, SPI Protocols Basic knowledge of the computers & its peripherals Military system development background
Key Responsibilities Perform tuning, configuration, installation, upgrading, and patching of database server and replication software to ensure seamless system performance and security. Evaluate new database features and products for potential implementation to optimize performance, reliability, and compatibility with existing infrastructure. Establish and maintain backup and recovery policies and procedures to ensure business continuity and prevent data loss in case of failures. Implement and manage database security, including user roles and privilege assignments to restrict unauthorized access and maintain data integrity. Conduct database and replication software tuning and performance monitoring to enhance operational efficiency and minimize downtime. Analyze database logs to identify and resolve potential performance issues before they escalate and impact system functionality. Execute capacity planning to accommodate future database growth and changes in alignment with business needs and technology upgrades. Provide general troubleshooting and consultation on SQL tuning and PL/SQL optimization to assist development teams with efficient database queries. Collaborate with development and IT teams to ensure database efficiency by optimizing indexes, query performance, and storage utilization. Work in coordination with helpdesk teams for database monitoring, upgrades, and activity planning to maintain system health and security. Configure, optimize, and maintain database backup and restoration processes ensuring quick recovery and minimal impact in case of failures
Responsibilities: WebLogic Installation, Upgrade & Patch Management – Ability to install WebLogic, perform upgrades, and apply critical/security patches across environments. Performance Tuning & Optimization – Expertise in tuning JVM, Work Managers, thread pools, and other WebLogic parameters for optimal performance. Store-and-Forward (SAF) Agents – Ability to configure, monitor, and troubleshoot SAF agents for reliable messaging. Data Sources Configuration & Tuning – Advanced understanding of JDBC connection pools, multi-data sources, and performance tuning. Thread Dump, Heap Dump & GC Analysis – Capability to capture and analyze JVM thread/heap dumps, and optimize garbage collection. WLST (WebLogic Scripting Tool) & Automation – Proficiency in WLST scripting, automation for deployments, and environment management. Advanced Troubleshooting of Environment & Application Issues – Diagnose and resolve complex multi-tier problems impacting applications and servers. Application Deployment & Management – Experience in deploying EAR, WAR, and JAR files, version management, and rollback strategies. Monitoring & Diagnostics Tools – Expertise in using WebLogic Console, Oracle Enterprise Manager, and third-party tools for proactive monitoring and alerting. Qualifications: Bachelor's degree in engineering, computer science, IT or MCA Minimum 3 years of experience in WebLogic administration, configuration, and troubleshooting. Strong expertise in WebLogic installation, tuning, and performance optimization on RHEL. Experience with load balancing, clustering, JDBC connection pools, and multi-pool tuning.
Experience of 3 yrs plus in software development using C++ and QT Work experience in Qt and QML for GUI development. Good Knowledge in OOPS, Multi-threading & Libraries Good knowledge in networking platforms TCP / IP / UDB Good knowledge in Linux platform
Quality Inspector (QA/QC) Education & Experience: Diploma with 2 - 5 years Work Location: Jigani, Bengaluru Key Responsibilities: 1. Candidates should have knowledge in Aerospace Manufacturing, handling instruments & inspection methods for receiving, in-process & final inspections, calibrated instruments process & stamping activities. 2. Good knowledge on RCCA, CAPA, 7QC tools, GD&T, Kaizen, Calibration & handling Internal Audits 3. Adherence to Quality Management System in accordance with AS9100 & AS9102 requirements.
Quality Inspector (QA/QC) Education & Experience: Diploma with 2 - 5 years Work Location: Jigani, Bengaluru Key Responsibilities: 1. Candidates should have knowledge in Aerospace Manufacturing, handling instruments & inspection methods for receiving, in-process & final inspections, calibrated instruments process & stamping activities. 2. Good knowledge on RCCA, CAPA, 7QC tools, GD&T, Kaizen, Calibration & handling Internal Audits 3. Adherence to Quality Management System in accordance with AS9100 & AS9102 requirements.
Job Responsibilities: User and Group Management including LDAP and Container Platforms Deploy, Configure, and Maintain Systems including container images and services File System & Security Attributes (ACLs, encryption on host and containers) Monitoring and Resource Management for Linux and Containers Control Boot Process and System Services including container runtimes Network & Security Management (firewall, SELinux, container security) Storage Management including LVM, SAN, and container persistent volumes (PVCs) Advanced Security and Patch Management (hardening Linux & containers) Virtualization & Container Operations (managing VMs, Docker/OpenShift lifecycle)
Senior Executive (Purchase) Position Title : Senior Executive – Purchase Department : Supply Chain (Purchase) Location : Bangalore Role Purpose: To support the Assistant Manager – Purchase in executing procurement activities for the MRO facility, ensuring timely sourcing, cost-effective purchasing, and compliance with company policies and regulatory requirements. The role involves vendor coordination, RFQ management, PO processing, and follow-up for on-time delivery of materials and services. Key Responsibilities: Assist in executing the purchase process as per the procurement plan. Float inquiries, prepare comparative statements, and support negotiation with vendors. Coordinate with suppliers for timely submission of quotations and clarifications. Prepare and process Purchase Orders (POs) in ERP/SAP system. Follow up with vendors for timely delivery and documentation. Maintain updated records of suppliers, quotations, and contracts. Assist in vendor evaluation and performance tracking. Support in maintaining compliance with quality, statutory, and company procurement guidelines. Coordinate with internal departments (Stores, Engineering, Finance, Quality) for smooth procurement cycle. Highlight delays, risks, or deviations to the Assistant Manager for corrective actions. Key Skills & Competencies: Good knowledge of procurement processes and vendor management. Basic understanding of aviation/aerospace MRO material procurement will be preferred. Strong negotiation, communication, and interpersonal skills. Proficiency in MS Office and ERP/SAP systems. Ability to work under timelines and manage multiple priorities. Qualifications & Experience: Graduate in Commerce/Science/Engineering. MBA/PG Diploma in Materials Management/Supply Chain preferred. 3–5 years of relevant experience in procurement (aviation/aerospace/MRO industry preferred). Key Performance Indicators (KPIs): On-time purchase order processing. Vendor response and delivery adherence. Cost savings achieved through negotiations. Accuracy of procurement documentation. Compliance with procurement policies and audit requirements
Shift In-Charge – MRO Department : Production and Maintenance Location : Bengaluru Role Overview The Shift In-Charge is responsible for leading and managing all maintenance operations during assigned shifts within the MRO facility. This role requires extensive experience in heavy aircraft maintenance, prior certifying authority, and proven supervisory capability. The Shift In-Charge ensures that aircraft maintenance activities are completed safely, efficiently, and in compliance with regulatory requirements, while coordinating manpower, resources, and workflows across teams. Key Responsibilities Lead and manage all maintenance activities during the assigned shift, ensuring timely execution of tasks. Supervise and coordinate teams of technicians, mechanics, and certifying staff across multiple work packages. Ensure compliance with OEM manuals, regulatory standards, and organizational procedures. Monitor shift progress, resolve technical issues, and provide guidance to certifying staff. Allocate manpower and resources effectively to meet maintenance schedules. Verify and sign off maintenance documentation where required, ensuring accuracy and compliance. Report shift progress, issues, and resource utilization to the Production Manager. Ensure strict adherence to safety, quality, and environmental standards within the MRO. Support audits, inspections, and continuous improvement initiatives. Qualifications & Experience Degree or Diploma in Aeronautical / Mechanical / Electrical / Avionics Engineering (or equivalent). Minimum 12 years of experience in an MRO environment working on heavy aircraft. At least 5 years of certifying aircraft experience. Minimum 3 years in a supervisory role, managing teams in a maintenance environment. Strong knowledge of heavy aircraft systems, maintenance practices, and regulatory compliance. Prior C130J experience would be an advantage Skills & Competencies Proven leadership and shift management skills. Excellent technical knowledge and troubleshooting capability. Strong planning and resource allocation abilities. Effective communication skills for coordination with staff, engineers, and management. Ability to make quick, safe, and compliant decisions under pressure. Commitment to safety, quality, and continuous improvement. Microsoft office
Position Title : Senior Executive – Stores Departmen t: Supply Chain (Stores) Location : Bangalore Reports To : Assistant Manager – Stores Role Purpose: To support the Assistant Manager – Stores in managing day-to-day store operations including receiving, storage, preservation, issuance, and dispatch of materials in the MRO facility. Ensure proper inventory control, documentation, and compliance with company and regulatory requirements. Key Responsibilities: Assist in receipt, verification, and proper storage of incoming materials. Ensure proper tagging, labeling, and binning of parts and consumables. Support issue of materials against approved requests/indents. Coordinate with Purchase, Quality, and User departments for smooth material flow. Update stock records in ERP/SAP system on a real-time basis. Assist in maintaining stock accuracy and conducting periodic cycle counts/physical verification. Monitor shelf-life items and initiate timely actions for renewal or disposal. Support bonded, customer-owned, and scrap material handling as per laid-down procedures. Ensure compliance with aviation regulatory standards, safety, and audit requirements. Highlight discrepancies, shortages, or non-conformances to the Assistant Manager – Stores. Key Skills & Competencies: Knowledge of storekeeping processes, inventory control, and material handling. Understanding of aviation/aerospace MRO stores management will be preferred. Good ERP/SAP knowledge for inventory transactions. Strong coordination and communication skills. Ability to work systematically with accuracy and attention to detail. Qualifications & Experience: Graduate in Commerce/Science/Engineering. Diploma/Certification in Materials Management/Supply Chain preferred. 3–5 years of relevant experience in stores/warehouse operations (aviation/aerospace/MRO industry preferred). Key Performance Indicators (KPIs): Accuracy of receipts and issues. Stock record accuracy and variance control. Compliance with regulatory and audit requirements. On-time support to maintenance and other departments. Effective space utilization and safety in stores.
Production Manager – MRO Position Summary The Production Manager – MRO is responsible for planning, directing, and controlling all maintenance and production activities on the shop floor to ensure safe, efficient, and timely execution of aircraft maintenance, repair, and overhaul work. This role ensures compliance with regulatory requirements, customer commitments, and organizational standards while driving productivity, cost control, and continuous improvement. Key Responsibilities: Operations & Production Management Lead, manage, and oversee daily aircraft maintenance and shop floor activities, ensuring adherence to schedules and turnaround times (TAT). Allocate manpower, equipment, and tooling resources effectively to maximize productivity. Ensure compliance with OEM manuals, regulatory authority guidelines(DGCA/EASA/FAA/Defense standards), and quality systems. Monitor and control workflow to prevent delays, reduce rework, and meet delivery deadlines. Coordinate with planning, engineering, quality, and logistics teams to ensure smooth operations. People & Leadership Supervise, train, and mentor engineers, technicians, and shop supervisors. Ensure a culture of safety, accountability, and continuous improvement. Lead daily production meetings, communicating priorities and resolving bottlenecks. Motivate teams to meet performance and safety standards. Compliance & Safety Ensure strict adherence to safety procedures, airworthiness requirements, and environmental standards. Implement and monitor compliance with regulatory requirements, customer contracts, and company policies. Support internal and external audits by regulatory authorities and customers. Ensure continuous improvement Cost & Resource Management Control production costs by efficient use of manpower, materials, and equipment. Track KPIs related to turnaround time, cost per man-hour, and rework rates. Provide regular performance reports to senior management. Continuous Improvement Drive Lean, Six Sigma, and other productivity improvement initiatives. Identify and implement process improvements to reduce downtime and enhance efficiency. Introduce best practices in scheduling, maintenance execution, and resource utilization. Qualifications & Experience Bachelor’s degree in Aeronautical / Mechanical / Industrial Engineering (or equivalent). 10–15 years of experience in aircraft MRO/Airline/Defense operations, with at least 5 years in a supervisory/managerial role OR An Aircraft Maintenance Engineer with 10 years certifying experience Strong knowledge of aircraft maintenance processes, tools, and regulatory requirements (DGCA/FAA/EASA/Defense). Proven track record of managing production teams in an MRO/Airline/Defence environment. Microsoft Office Skills & Competencies Strong leadership and team management skills. Excellent problem-solving and decision-making ability. Effective communication and interpersonal skills. High focus on safety, quality, and compliance. Ability to manage multiple priorities in a high-pressure environment. Proficiency in ERP/MIS systems related to MRO operations.
Production Planning Engineer Department: Engineering & Planning ( PPCES ) Coordinates With: Production, QA, Technical Services, and Supply Chain Objective: To plan and monitor daily and weekly maintenance activities, ensuring optimal manpower and resource utilization for efficient execution. Key Responsibilities: Prepare daily/weekly plans and task dashboards. Calculate man-hours and support manpower resource allocation. Conduct daily coordination meetings with stakeholders. Issue and control task cards and ERP-linked work orders. To make sure pre-loads are checked and confirmed as per tasks assigned. Deliverables: Daily & Weekly Maintenance Plans Task Dashboards Resource Utilization Reports Controlled Task Cards Qualifications: Education: B.E/AME Experience: 2–6 years in production planning (ERP experience preferred) Key Competencies: Strong planning and execution skills ERP and data management proficiency Ability to coordinate across departments