103 Substation Design Jobs - Page 3

CAD-SLD-HT & LT Panels & DBs, Cable tray, Power, Lighting, Earthing, SS. ELV-CCTV, ACS, PA system, Power, Raceway. IS/IEC Code/ Local EB Rules Co-ordination- Architecture, MEP Mail communication

Role & responsibilities: Lead the primary engineering design for high-voltage (HV) and extra-high voltage (EHV) substations (e.g., 220kV, 400kV, 765kV). Prepare and review layouts, general arrangement (GA) drawings, equipment sizing, grounding and earthing, and cable routing. Coordinate with multi-disciplinary teams including protection, civil, and project management teams to ensure design integration. Review client technical specifications and ensure alignment with applicable standards (e.g., IEC, IEEE, IS). Support procurement by preparing technical specifications for equipment and participating in technical bid evaluations. Liaise with clients, vendors, and stakeholders for design approvals and issue resolution. Maintaining a strong understanding of relevant standards, regulations and industry best practices. Preferred candidate profile The candidate should be having experience of detailed substation design engineering of minimum 220 KVA.

Qualifications Minimum Qualification : B.E. / B. Tech. in Electrical / Electrical & Electronics Engineering Experience : 8-12 years (Must have experience in design aspects of Primary Engineering / Secondary Engineering in Substations / Power Distribution Projects) Job Description Objective: As Design Lead (Primary), the person shall be capable of reviewing & executing Primary Engineering Activities for AIS / GIS Substation Projects covering multiple geographical domains. He must have good knowledge in Layout Engineering in Substation Projects. He shall facilitate the modellers in development of BIM 3D Model for Substations. In addition, she / he has to coordinate with other departments including Inter-departmental checks covering, Electrical, Civil/ Structural, MEP and others. The Design Lead (Primary) shall be required to provide support for the engineering activities covering the full cycle of works from pre-bid engineering to support during commissioning and warranty periods and to extend support to site team. She / He shall lead a team of Design Engineers and Draughtspersons to manage the Engineering activities within budget, deliver on time and maintaining a high quality of engineering. Key Responsibilities: Timely Delivery of Engineering Drawings & Documents • Ensure deliveries are aligned to Project Schedule • Seek and obtain spatial requirements and details of cut-outs and openings from the Design Lead (Secondary) and incorporate into relevant Drawings • Review primary drawings by Design Engineers & Draughtspersons & checking of design & sizing calculations of primary engineering electrical equipment and obtaining approvals from the client • Review of Vendor deliverables pertaining to Primary Engineering • Capable of Multitasking and deliver multiple things on time • Estimate and Plan man-hour requirements • Review BOQ and submit to contracts team and providing technical clarifications • Coordinate with multiple disciplines for ensuring inter-departmental checks • Provide support & clarifications to the Site Execution team • Check pre-award evaluation of vendors (w.r.t. technical specifications requirement of the client) and forward the validation document to Supply Chain Management • Inspect equipment from the finalized vendor after submission of validation document of the vendor • Clarify issues w.r.t. the design & requirements of the client to the Site Execution Team • Collect inputs for project details (plot details, feeder arrangements etc.) from client & Project Engineering Manager Sensitivity: LNT Construction Internal Use • Coordinating with Operations team and informing Design specifications for obtaining approval • Collect inputs for project details (General Arrangement Drawings) from Vendors • Check deliverables such as Equipment layouts, Cable Routing Layout, Cable Tray Layout, Earthing Layout, lighting Layout, Lightning Protection Layout • Provide support to secondary team for reviewing Vendor drawings • Submit requirement of man-hours for undertaking & reviewing of design & drawings of the project Technical Expertise: The Design Lead (Primary) is required to have an overall knowledge of equipment layouts and necessary calculations. The Design Lead (Primary) should also have detailed knowledge of Substation equipment and their Layouts. Furthermore, she / he should have the understanding of primary engineering activities covering SLD Preparation, Layout Engineering, Earthing, Cable Routing, Lighting, Lightning Protection, Cable Tray Routing etc. He should be capable of performing design & sizing calculations of Busbar, UPS, DG, LT Transformer, Earthing Conductor, calculations (Short circuit force, Sag tension, CCC etc.). The Design Lead (Primary) is required to have knowledge on National and International Codes and Standards. The Design Lead (Primary) is required to understand and interpret the contractual technical requirements and facilitate the Project Teams as and when required. In addition, the Design Lead (Primary) should also have an overall understanding of the interdisciplinary (Civil & Structural, Mechanical and Instrumentation) design aspects of electrical equipment. Additional Information Experience in design engineering for AIS/GIS Substation upto 400 KV is preferred We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our peoples ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.

Objective: As the Design Lead Civil & Structural, the person is required to strictly adhere to the schedule of the ongoing projects. He shall also be responsible for adherence to the resource allocated, for self & subordinates, for the project (man-hours) for smooth & timely completion by checking of the designs, drawings and other deliverables for the projects. In addition, he shall be directly responsible for ensuring submission of deliverables, on time, to the clients. The Design Lead shall be required to provide support for the engineering activities covering the full cycle of works from pre-bid engineering to support during commissioning and warranty periods and to extend support to site team. She / He shall lead a team of Engineers and drafts persons to manage the Engineering activities within budget, deliver on time and maintaining a high quality of engineering. Key Responsibilities: Collecting inputs for project details (plot details, feeder arrangements etc.) from client & Project Engineering Manager Collecting inputs for project details (General Arrangement Drawings) from Vendors • Preparing civil & structural deliverables such as buildings, Gantry, equipment structures, drainage systems, Cable trenches, roads etc. • Submission of requirement of man-hours for undertaking & reviewing of design & drawings of the project Reviewing of BOQ and submission to contracts team and providing technical clarifications Reviewing of design & drawings, made by Design Engineers & Draughtsperson & checking of design & calculations and obtaining approvals from the client Coordination with multiple disciplines for ensuring inter-departmental checks • Providing support & clarifications to the Site Execution team Checking of pre-award evaluation of vendors (w.r.t. technical specifications requirement of the client) and forwarding the validation document to Supply Chain Management Clarification of conflict w.r.t. the design & requirements of the client to the Site Execution Team Technical Expertise: The Design Lead is required to have an overall knowledge of RCC & Steel Structures, Outdoor Gantry & equipment Structures, Transformers, Site grading, other outdoor services like drainage system, roads, cable trenches, etc. She / He is also required to have hands on experience of design Software viz. STAAD Pro., ETABs, AUTOCAD, REVITT & TEKLA. The Design Lead should also have detailed knowledge of Substation equipment and their Layouts. Furthermore, she / he should have the basic and detailed understanding of civil & structural drawings, GA drawings of equipment & gantry towers, foundation for transformers & other electrical equipment in Substation & Transmission Lines.

Ability to draw projects as per the requirement in line with given instructions. Perform the required design tasks within the allocated time respecting the deadline with quality output. Be familiar with applicable codes & standards. Strong working knowledge of Micro station/ Building Designer/AutoCAD and 3D drafting tools. Full knowledge of project filing system and working knowledge on document management system. Be passionate about drafting. Good communication skills, both in presentation and documentation with command in English

Good working knowledge on design of control, protection, metering, and monitoring systems for LV/ MV/ HV/ EHV substations from concept design to construction drawings. Working knowledge on T&D functions w.r.t construction in coordination with other engineering disciplines. Working knowledge on control, protection, metering, and monitoring systems pertaining to control & protection schemes, CT/ PT calculations, relay setting calculations etc. Strong Knowledge of SAS system, IED relays, IEC61850, and interface with SCADA and communication Familiar with relevant codes & standards International electro-technical commission (IEC), IEEE, BS (British Standards), Regional Standards, Quality and Metrology Organization (SASO), SEC standards etc. Strong understanding and working knowledge of design software – DIGSI, PCM600, MICOM AGILE, Envista, SEL, Building Designer, MicroStation, AutoCAD etc. Be passionate about protection systems and the power environment. Be a creative leader in design and project management. Have excellent technical skills and be able to mentor staff in their own development and the development of projects. Good communication skills, both in presentation and documentation with a good command over English.

Senior Executive Engineer – Primary Engineering The future of clean energy is in our hands. Join us and make it your job to see these ideas come to life. Without electricity, our world of devices, machines, and systems would stand still. Our Electrical engineers get them up and running. In this process, they enjoy thinking outside of the box, are open to new things, and curious about the latest trends. Join our team and become a contributor to the design of new products that will change the world of tomorrow! Working together for the future. You’ll be leading a team of 3-4 engineers to deliver Customer interface primary engineering activities. You’ll be working for multiple projects / substations in India and abroad. You’ll be working for High Voltage Manufacturing Hub. What you need to make real what matters. You are an Electrical Engineer with 5-7 years of work experience You have hands-on experience in design and engineering for Substations (Air Insulated Substation / Gas Insulated Substation) You are proficient with Microsoft Excel and well versed with 3D CAD tools like AutoCAD, Primtech etc. You've sound technical knowledge and in depth understanding of international and Indian standards. You've hands on design experience for multiple projects in substation design and have deep understanding of customer specification for several customers. Make your mark in our exciting world at Siemens Energy India Limited We are looking forward to receiving your online application. Please ensure you finish all the areas of the application form, to the best of your ability to help us review your suitability for the role About us We’re Siemens Energy. A collection of over 377,000 minds building the future, one day at a time. We're dedicated to quality and equality and we welcome applications that reflect the diversity of the communities we work in. Bring your curiosity and imagination and help us shape tomorrow. The job location is Pune, but you’ll also get to visit other locations as per business need, so you’ll need to go where this journey takes you.

Major Role and Responsibility: Candidate shall have worked on Detail Engineering of AIS and GIS Substation/Switchyard (66 kV, 132 kV, 220 kV). 400 kV and higher voltage shall be added advantage. Candidate should be aware on CEA, CBIP, IS, IEC, NEC and NFPA guidelines. Candidate should have CTU (PGCIL), STU (GETCO, MSETCL, RJVNPL, KPTCL, UPPTCL etc.) requirement. Candidate should have worked on key SLD, metering & protection SLD, substation plan and elevation, erection key diagram, clearance diagram etc. layout. Candidate should have worked on earthing system design in accordance with IEEE 80 standard. Candidate have experience on working ETAP, CDEGS or equivalent software would be preferred. Candidate should have worked on DSLP (direct storke lightning protection) and lightning risk assessment in line with IEEE 998, Dr. Rezvig Method, IEC 62305 method. Candidate should have worked on auxiliary transformer sizing, DG sizing, battery and battery charger sizing, UPS sizing. Candidate should have knowledge of Protection coordination studies for Switchyard. Candidate should have worked on cable schedule, cable sizing calculation, interconnection schedule. Candidate should have experience of technical procurement support management including technical specifications, offer review, technical bid analysis, vendor document review. Candidate have worked on Owners Engineering on Substation projects shall be added advantage. Candidate have working experience on Solar PV Plant, wind farm, BESS, green hydrogen facility design shall be added advantage. Candidate should have worked on auxiliary power system SLD, load list preparations on Substation. Candidate should have worked on main control room building equipment plan, cable trench layout, earthing layout, lightning protection etc. aspect. Additional Skills Candidate should have BE- Electrical or ME- Electrical degree. Good communication skills. Project Management Skills.

The Big Picture: The PV Design Engineer will provide Solar PV, C&I, Utility or substation design engineering support throughout the design phase of the project. What you ll do: Youll generate Photovoltaic designs using AutoCAD, including site plans, property plans, array layouts, electrical single and three-line drawings, and equipment elevations. Must Haves: 12-18 months of Design experience in any industry and preferably from ELECTRICAL academic is great to have. Ability to learn and adapt to new concepts/ systems quickly. Ability to handle multiple tasks and meet deadlines. Comfortable working in a fast-moving dynamic environment Ability to work under minimal supervision and resolve issues independently based on project/company standards. Great to Have: Experience or certification in AutoCAD, PVSyst, and or other cad-based software platforms would be a plus. Experience in 2D drafting / 3D modeling software would be a great fit. Skill Sets we require: Critical thinker and problem-solver Good time-management skills Great interpersonal and communication skills. Ability to Meet Deadlines Proven ability to handle multiple projects simultaneously, with an eye for prioritization.

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 2-6years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 2-6years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 6+ years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 6+ years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 8+ years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Roles and Responsibilities Strong understanding of substation design principles, electrical equipment, and relevant standards. Develop and create 3D models of Substation AIS Equipment like CB, DS & ES, CT, CVT, LA, BPI, Al. Tube, Clamps & Connectors, Lattice structure for bus and line gantry etc. using PRIMTECH 3D Modelling of Power Transformers, Outdoor and Indoor GIS, Hybrid GIS, Reactors, GIS Hall, Control Building, Substation overall layout etc. using PRIMTECH 3D. Create accurate layouts of substations, considering space constraints, safety clearances, and interconnections. Manage and update the 3D model throughout the project lifecycle, ensuring consistency and accuracy. Preparation of BOQ for cables, trays, clamps & connectors, insulator hardware, disc insulators, BPI etc. using PRIMTECH 3D. Hands on experience on Simulation of Substation Sag tension Calculation, Short Circuit force calculation, Lightning protection calculation, cantilever force calculation, Clearance diagram preparation etc. using PRIMTECH 3D. Communicate with clients to understand their needs and provide visualizations of the substation design. Experience of making prototype GA using given templates and vendor GA drawing using PRIMTECH 3D is highly required. Preparation of As Built drawings, Construction Drawings, field red markup drawing update etc. using PRIMTECH 3D. Work closely with other engineers and designers, including electrical engineers, civil engineers, and mechanical engineers, to ensure a cohesive design. Demonstrate proficiency in PRIMTECH software and other relevant CAD software like AutoCAD, Revit, and Micro station, Solid Works etc. will be preferable. Prepare and maintain documentation related to the 3D model, including drawings, specifications, and reports. Skills Key Skills required: 3D Modeling PRIMTECH Software Substation Design Electrical Engineering CAD Software (AutoCAD, Revit, MicroStation) Project Management Communication Problem-Solving S tention to DetailS Desired Candidate Profile A bachelor's degree/diploma in electrical engineering or related discipline. Experience in Power Plant and Substation field. Minimum 2 to 4 years of Experience in Substation GIS Design. MS-Office, Auto CAD, MS-Project Perk & Benefit: 5 Days Working Flexible working Meal Allowance Work Location: Pune.

Roles and Responsibilities Strong understanding of substation design principles, electrical equipment, and relevant standards. Develop and create 3D models of Substation AIS Equipment like CB, DS & ES, CT, CVT, LA, BPI, Al. Tube, Clamps & Connectors, Lattice structure for bus and line gantry etc. using PRIMTECH 3D Modelling of Power Transformers, Outdoor and Indoor GIS, Hybrid GIS, Reactors, GIS Hall, Control Building, Substation overall layout etc. using PRIMTECH 3D. Create accurate layouts of substations, considering space constraints, safety clearances, and interconnections. Manage and update the 3D model throughout the project lifecycle, ensuring consistency and accuracy. Preparation of BOQ for cables, trays, clamps & connectors, insulator hardware, disc insulators, BPI etc. using PRIMTECH 3D. Hands on experience on Simulation of Substation Sag tension Calculation, Short Circuit force calculation, Lightning protection calculation, cantilever force calculation, Clearance diagram preparation etc. using PRIMTECH 3D. Communicate with clients to understand their needs and provide visualizations of the substation design. Experience of making prototype GA using given templates and vendor GA drawing using PRIMTECH 3D is highly required. Preparation of As Built drawings, Construction Drawings, field red markup drawing update etc. using PRIMTECH 3D. Work closely with other engineers and designers, including electrical engineers, civil engineers, and mechanical engineers, to ensure a cohesive design. Demonstrate proficiency in PRIMTECH software and other relevant CAD software like AutoCAD, Revit, and Micro station, Solid Works etc. will be preferable. Prepare and maintain documentation related to the 3D model, including drawings, specifications, and reports. Skills Key Skills required: 3D Modeling PRIMTECH Software Substation Design Electrical Engineering CAD Software (AutoCAD, Revit, MicroStation) Project Management Communication Problem-Solving S tention to DetailS Desired Candidate Profile A bachelor's degree/diploma in electrical engineering or related discipline. Experience in Power Plant and Substation field. Minimum 2 to 4 years of Experience in Substation GIS Design. MS-Office, Auto CAD, MS-Project Perk & Benefit: 5 Days Working Flexible working Meal Allowance Work Location: Pune.

Exp in protection and control systems for AIS & GIS substations Ability to create and interpret one-line and three-line diagrams, protection schemes, control circuits,panel designs Proficient in preparing wiring diagrams, cable schedules, (BOM)

Electrical/Civil/Structural Design Engineer for Substation Projects with proficiency in AutoCAD and MicroStation. Location : Saudi and Hyderabad

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Requirements Overall 6+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Must have exp in BOQs and drawings.To prepare accurate quantity take offs. Knowledge on technical indices for buildings, tower &substation structures .Strong in MS Excel .Must have worked on transmission lines .BTech Civil Must . Required Candidate profile Must -BTech Civil .EXp in Civil Estimation and Design of Substation Projects .Exp in Review of Tender Documents .Must have done extensive projects in transmission lines .

Responsibilities: * Create single line diagrams & cable schedules. * Perform earthing calculations & lighting designs. * Design electrical systems using Dialux software. * Calculate loads, select transformers & cables.

Min. 5 years of experience in designing of Switchyard min. 132kV, • Prepare and Timely deliver construction layouts, Prepare Substation Design Calculations, Review Vendor Equipment Documents

Main responsibilities i. Understanding of complete Switchyard / Substation design & drawings including but not limited to (SLD / Layout / EKD / Cable Trench layout / Building GA / Earthing Layout / LV-HT Switchgear etc.). ii. Understanding of various interfaces with other disciplines like civil-electrical-mechanical. iii. Hands on experience in various electrical design calculations involved in switchyard / Substation. iv. To lead the single complete switchyard / substation. v. To understand & follow the technical specification of Switchyard / Substation. vi. Progress tracking and maintaining the Master Document List for Switchyard / Substation vii. Preparing and maintaining drawings and records. viii. Daily updating of project work to reporting manager. Profile & Eligible Criteria At least overall 5-10 years and above experience in Switchyard engineering Minimum educational qualification should be B.E or B.Tech in Electrical Engineering. Candidate must be ; Aware of all major equipment's & drawings & design documents involved in Switchyard / Substation. Must have hands on experience in switchyard/Substation design. Must be conversant with basic tools like Auto-cad / MS-office etc.

Good know how on design of electrical systems for LV/ MV/ HV/ EHV substations from base design, detail design to IFC stages. Working knowledge on T&D functions w.r.t construction contractors in coordination with other engineering disciplines. Working knowledge on preparation of Equipment Layouts (GIS, switchgear, transformer, capacitor bank etc.), Trays, duct banks & tunnel layouts, Lighting, Shielding & earthing, AC/DC auxiliary system design etc. Familiar with relevant codes & standards International electro-technical commission (IEC), IEEE, BS (British Standards), Saudi Standards, Quality and Metrology Organization (SASO), SEC standards etc. Strong understanding and working knowledge of design software – CDEGS, Dialux, Building Designer, MicroStation, AutoCAD etc. Fair understanding of 3D tools, 3D modelling and DMS. Be passionate about electrical systems and the power environment. Be a creative leader in design and project management. Have excellent technical skills and be able to mentor staff in their own development and the development of projects. Good communication skills, both in presentation and documentation with a command over English.

Hiring for Civil & structural design-- with one of the developer company in power transmission. Location - North India. Must have experience in Substation design or switchyard design. Capability of layout engineering for AIS & GIS substation project with relevant engineering calculations along with Structure and Civil Engineering Calculations: Candidate should have experience of designing of High Voltage substations up to 400 & 765 kV. Candidate should have knowledge of AIS and GIS systems. Candidate having knowledge of Transmission line will be an added advantage. In depth understanding of EHV equipment's & its support structures arrangements Capability of understanding Secondary foundations and building Engineering