Job
Description
Candidate (RE) should be BE -Electrical or Mechanical from reputed collage / institution having 10-12 yrs of experience of handling site activities of Data Centre mainly to co-ordinate between Site team of client and Design team of consultant. The RE s shall be based at the Construction Site Offices. Office space including desk, chair, power and network connection shall be provided by the General Contactor (GC) while all other requirements shall be provided by CLIENTs MEP Consultant. The RE shall be Degree Qualified in their Discipline, hold membership of any Statutory or Trade Bodies required to practice that Discipline and have at least 10 years experience on Data Center Design & Construction Projects performing duties appropriate with those set out in this section. The primary role of the Resident Engineer is to ensure that all Works are executed in accordance with the requirements as set out in the contract, in particular that the Works are executed: In a good and workmanlike manner and in accordance with best building and engineering practice. In accordance with this Contract, Good Industry Practice and free from fault or defects, save for minor faults or defects which shall be dealt with in accordance with the defect s provisions of the Contract; So that materials and workmanship shall be of the respective kinds described in the Contract Documents. So as to fully comply with the Owner s requirements set out in the contract; So as to fully comply with applicable CLIENT and all Statuary Requirements, Design Codes, Building regulations, the Planning Permit, and the other Consents In addition:, Monitor and validate site operations by means of signed Inspection Reports containing photos; in relation to contract requirements, governing standards and quality of workmanship and materials; Liaise with CLIENT s Construction Management (CM), CLIENT DE, Owner s Engineer and Contractors Draw attention to any issues relating to safety and give instructions in an emergency; Attend benchmarking reviews in conjunction with the Contractor, the CLIENT s CM and agree to the Quality Standards to be achieved in the execution of the Works; Liaise with Site Staff as appointed by the Contractor; Participate in Site Coordination meetings; Obtain information on and become familiar with any CLIENT s Procedures and Standards applicable to the executions of the works and adhere to these in carrying out any services. Participate in the carrying out of independent audits of the Works as directed by the CLIENT s Team Conduct a weekly update call with CLIENT s DE and CM for progress updates and issue resolution; Participate in daily site walks with the relevant sub-Contractors; Maintain an up-to-date set of all design and production information on site; Monitor the preparation and certification of As-Built records and drawings, auditing 50% of Contractor supplied As-Built information for accuracy of content. Certification of the work completion report. Set up and maintain appropriate samples of products, finishes and workmanship as appropriate to establish and agree quality levels for site work; Check drawings for errors and discrepancies, maintain change management records. Inspections of Equipment s & MEP execution activities as per the agreed Inspection Test Plan and to release Mock up approvals issued by the Contractor. Take systematic site photographs at agreed intervals ensuring they are date-stamped; Provide Weekly Reports monitoring the performance of the works including compliance to quality standards and metrics on mock-ups / benchmarks, RFI s, Technical Submittals and Site Report immediately on the following during Inspection:, Performance of the Contractor where this is likely to adversely affect the Design, Quality of execution and schedule for the works; Actions or incidents likely to affect safety or security. Inspect the progress and quality of the works Attend site progress meetings and participate in reviewing progress and identifying information requirements Maintain a site diary with daily entries in sufficient detail to record the progress and circumstances of incidents which may affect the design, cost and schedule of the works and which may be called upon in adjudicating claims or other disputes; Witness sample taking and any site testing of materials, components, techniques and Workmanship Arranging and coordination with owner team set points / changes in set parameters . Witness the opening up of completed work to determine that it is in accordance with the contract documents; Make inspections of and report on sites of the extraction, fabrication and assembly of material s and components as appropriate; Make inspections of materials received at site Attend all site acceptance tests for Substation HV, MV, LV and other miscellaneous equipment s Attend all witness testing Assist with the review of shop drawings and submittals Liaise with power and telecommunication team to resolve the issues Respond to RFI s and Technical Submittals within one week of receipt. RE to : Record and report (by way of NCR report) on any material received at site or site work which is not in accordance with the design and requirements of the contract Attend all meetings with Statutory Authorities held on site and take minutes of same Participate in post completion review of the project to enable future improvements to design, procurement and administration Review completed spaces and develop punch-lists upon completion of each execution phase; Track modifications to the design; Track any actions likely to incur extra cost; Review methods of working; Track variations to procedures specified in the contract; Issue a Daily Site Diary including Photographs of the Works; Issue a Weekly Report including time stamped photographs; Raise Non-Conformance Reports in conjunction with the Discipline Subcontractor; Candidate (RE) should be BE -Electrical or Mechanical from reputed collage / institution having 10-12 yrs of experience of handling site activities of Data Centre mainly to co-ordinate between Site team of client and Design team of consultant. The RE s shall be based at the Construction Site Offices. Office space including desk, chair, power and network connection shall be provided by the General Contactor (GC) while all other requirements shall be provided by CLIENTs MEP Consultant. The RE shall be Degree Qualified in their Discipline, hold membership of any Statutory or Trade Bodies required to practice that Discipline and have at least 10 years experience on Data Center Design & Construction Projects performing duties appropriate with those set out in this section. The primary role of the Resident Engineer is to ensure that all Works are executed in accordance with the requirements as set out in the contract, in particular that the Works are executed: In a good and workmanlike manner and in accordance with best building and engineering practice. In accordance with this Contract, Good Industry Practice and free from fault or defects, save for minor faults or defects which shall be dealt with in accordance with the defect s provisions of the Contract; So that materials and workmanship shall be of the respective kinds described in the Contract Documents. So as to fully comply with the Owner s requirements set out in the contract; So as to fully comply with applicable CLIENT and all Statuary Requirements, Design Codes, Building regulations, the Planning Permit, and the other Consents In addition:, Monitor and validate site operations by means of signed Inspection Reports containing photos; in relation to contract requirements, governing standards and quality of workmanship and materials; Liaise with CLIENT s Construction Management (CM), CLIENT DE, Owner s Engineer and Contractors Draw attention to any issues relating to safety and give instructions in an emergency; Attend benchmarking reviews in conjunction with the Contractor, the CLIENT s CM and agree to the Quality Standards to be achieved in the execution of the Works; Liaise with Site Staff as appointed by the Contractor; Participate in Site Coordination meetings; Obtain information on and become familiar with any CLIENT s Procedures and Standards applicable to the executions of the works and adhere to these in carrying out any services. Participate in the carrying out of independent audits of the Works as directed by the CLIENT s Team Conduct a weekly update call with CLIENT s DE and CM for progress updates and issue resolution; Participate in daily site walks with the relevant sub-Contractors; Maintain an up-to-date set of all design and production information on site; Monitor the preparation and certification of As-Built records and drawings, auditing 50% of Contractor supplied As-Built information for accuracy of content. Certification of the work completion report. Set up and maintain appropriate samples of products, finishes and workmanship as appropriate to establish and agree quality levels for site work; Check drawings for errors and discrepancies, maintain change management records. Inspections of Equipment s & MEP execution activities as per the agreed Inspection Test Plan and to release Mock up approvals issued by the Contractor. Take systematic site photographs at agreed intervals ensuring they are date-stamped; Provide Weekly Reports monitoring the performance of the works including compliance to quality standards and metrics on mock-ups / benchmarks, RFI s, Technical Submittals and Site Report immediately on the following during Inspection:, Performance of the Contractor where this is likely to adversely affect the Design, Quality of execution and schedule for the works; Actions or incidents likely to affect safety or security. Inspect the progress and quality of the works Attend site progress meetings and participate in reviewing progress and identifying information requirements Maintain a site diary with daily entries in sufficient detail to record the progress and circumstances of incidents which may affect the design, cost and schedule of the works and which may be called upon in adjudicating claims or other disputes; Witness sample taking and any site testing of materials, components, techniques and Workmanship Arranging and coordination with owner team set points / changes in set parameters . Witness the opening up of completed work to determine that it is in accordance with the contract documents; Make inspections of and report on sites of the extraction, fabrication and assembly of material s and components as appropriate; Make inspections of materials received at site Attend all site acceptance tests for Substation HV, MV, LV and other miscellaneous equipment s Attend all witness testing Assist with the review of shop drawings and submittals Liaise with power and telecommunication team to resolve the issues Respond to RFI s and Technical Submittals within one week of receipt. RE to : Record and report (by way of NCR report) on any material received at site or site work which is not in accordance with the design and requirements of the contract Attend all meetings with Statutory Authorities held on site and take minutes of same Participate in post completion review of the project to enable future improvements to design, procurement and administration Review completed spaces and develop punch-lists upon completion of each execution phase; Track modifications to the design; Track any actions likely to incur extra cost; Review methods of working; Track variations to procedures specified in the contract; Issue a Daily Site Diary including Photographs of the Works; Issue a Weekly Report including time stamped photographs; Raise Non-Conformance Reports in conjunction with the Discipline Subcontractor; All interviews are conducted either in person or virtually, with video required. Job Description Candidate (RE) should be BE -Electrical or Mechanical from reputed collage / institution having 10-12 yrs of experience of handling site activities of Data Centre mainly to co-ordinate between Site team of client and Design team of consultant. The RE s shall be based at the Construction Site Offices. Office space including desk, chair, power and network connection shall be provided by the General Contactor (GC) while all other requirements shall be provided by CLIENTs MEP Consultant. The RE shall be Degree Qualified in their Discipline, hold membership of any Statutory or Trade Bodies required to practice that Discipline and have at least 10 years experience on Data Center Design & Construction Projects performing duties appropriate with those set out in this section. The primary role of the Resident Engineer is to ensure that all Works are executed in accordance with the requirements as set out in the contract, in particular that the Works are executed: In a good and workmanlike manner and in accordance with best building and engineering practice. In accordance with this Contract, Good Industry Practice and free from fault or defects, save for minor faults or defects which shall be dealt with in accordance with the defect s provisions of the Contract; So that materials and workmanship shall be of the respective kinds described in the Contract Documents. So as to fully comply with the Owner s requirements set out in the contract; So as to fully comply with applicable CLIENT and all Statuary Requirements, Design Codes, Building regulations, the Planning Permit, and the other Consents In addition:, Monitor and validate site operations by means of signed Inspection Reports containing photos; in relation to contract requirements, governing standards and quality of workmanship and materials; Liaise with CLIENT s Construction Management (CM), CLIENT DE, Owner s Engineer and Contractors Draw attention to any issues relating to safety and give instructions in an emergency; Attend benchmarking reviews in conjunction with the Contractor, the CLIENT s CM and agree to the Quality Standards to be achieved in the execution of the Works; Liaise with Site Staff as appointed by the Contractor; Participate in Site Coordination meetings; Obtain information on and become familiar with any CLIENT s Procedures and Standards applicable to the executions of the works and adhere to these in carrying out any services. Participate in the carrying out of independent audits of the Works as directed by the CLIENT s Team Conduct a weekly update call with CLIENT s DE and CM for progress updates and issue resolution; Participate in daily site walks with the relevant sub-Contractors; Maintain an up-to-date set of all design and production information on site; Monitor the preparation and certification of As-Built records and drawings, auditing 50% of Contractor supplied As-Built information for accuracy of content. Certification of the work completion report. Set up and maintain appropriate samples of products, finishes and workmanship as appropriate to establish and agree quality levels for site work; Check drawings for errors and discrepancies, maintain change management records. Inspections of Equipment s & MEP execution activities as per the agreed Inspection Test Plan and to release Mock up approvals issued by the Contractor. Take systematic site photographs at agreed intervals ensuring they are date-stamped; Provide Weekly Reports monitoring the performance of the works including compliance to quality standards and metrics on mock-ups / benchmarks, RFI s, Technical Submittals and Site Report immediately on the following during Inspection:, Performance of the Contractor where this is likely to adversely affect the Design, Quality of execution and schedule for the works; Actions or incidents likely to affect safety or security. Inspect the progress and quality of the works Attend site progress meetings and participate in reviewing progress and identifying information requirements Maintain a site diary with daily entries in sufficient detail to record the progress and circumstances of incidents which may affect the design, cost and schedule of the works and which may be called upon in adjudicating claims or other disputes; Witness sample taking and any site testing of materials, components, techniques and Workmanship Arranging and coordination with owner team set points / changes in set parameters . Witness the opening up of completed work to determine that it is in accordance with the contract documents; Make inspections of and report on sites of the extraction, fabrication and assembly of material s and components as appropriate; Make inspections of materials received at site Attend all site acceptance tests for Substation HV, MV, LV and other miscellaneous equipment s Attend all witness testing Assist with the review of shop drawings and submittals Liaise with power and telecommunication team to resolve the issues Respond to RFI s and Technical Submittals within one week of receipt. RE to : Record and report (by way of NCR report) on any material received at site or site work which is not in accordance with the design and requirements of the contract Attend all meetings with Statutory Authorities held on site and take minutes of same Participate in post completion review of the project to enable future improvements to design, procurement and administration Review completed spaces and develop punch-lists upon completion of each execution phase; Track modifications to the design; Track any actions likely to incur extra cost; Review methods of working; Track variations to procedures specified in the contract; Issue a Daily Site Diary including Photographs of the Works; Issue a Weekly Report including time stamped photographs; Raise Non-Conformance Reports in conjunction with the Discipline Subcontractor; Qualifications & Requirements All interviews are conducted either in person or virtually, with video required.
