546 Lab Testing Jobs - Page 7

Responsibilities: Assist in sample preparation & chemical testing Handling critical chemicals Maintain lab instruments & audit documents. Prepare and dilute KMnO solutions for analysis. Coordinate with management & HODs

Position- Lab Technician Location- Basti, (UP) Note : UP State Medical Faculty Registration is Mandatory Qualification Required- DMLT, BMLT, CMLT, Bvoc MLT Experience- 1- 5 years Role & responsibilities To perform assigned analytical testing procedures in an accurate, precise, and timely manner in the assigned lab. To perform routine and non-routine activities pertaining to laboratory testing and reporting and maintaining external and Internal Quality control Maintain required records and documentation. Follow the laboratory's procedures for specimen handling and processing, test analyses, reporting and maintaining records of patient test result. Analyze specimens using approved testing procedures as per SOP's, review and release test results. Adhere to the laboratory's quality control policies, instrument and procedural calibrations and follow safety guidelines as per established organization protocols. Preferred candidate profile: Qualification: DMLT, BMLT, CMLT, Bvoc MLT Experience: 1-5 Years

Role & responsibilities Manager technical is the In-charge of Analytical Division. He/She shall report to the SBU-head about all the activities in the Analytical Division. He/She shall look after all the operations of the Division under the guidance/ supervision of SBU-Head. He/She shall be responsible for the standardization and validation of the test methods. He/She shall be responsible for ensuring the availability of the reference material / working reference standard. He/She shall be responsible for assigning the jobs to the analyst as per their calibre. He/She shall be responsible for checking the calculation part and reporting of the results before sending for authorized signatory. He/She shall be responsible for the smooth operations of the equipments/Instruments. He/ She shall be responsible for signing the test certificate / test reports. He/ She shall be responsible for verifying the outside calibration certificates. He/She shall be responsible for the supervision of technical staff working under him/ her. He/She shall be responsible for filling the change control, deviation control, OOS, CAPA raised by technical department. He/She shall be responsible for the preparing / reviewing the scope as per requirements. He/She shall ensure that the glassware used in his / her section should be duly calibrated or verified as required. He/She shall be responsible for the qualification and calibration of new instruments/ equipment. He/She shall be responsible for the maintaining overall quality as per ISO/IEC 17025. He/She shall be responsible for all the relevant works of VP- Technical/GM Operation in his absence.

About Company RAKT Innovation is a healthcare company focused on improving blood banking services. It supports hospitals and clinics by ensuring safe, timely blood collection, storage, and distribution. The company emphasizes quality, compliance, and efficient donor and inventory management, while also promoting voluntary blood donation and strengthening public health infrastructure. Key Responsibilities: Receive, label, and process donor blood samples and units. Perform quality control procedures and maintain proper documentation. Maintain accurate records of all testing and component preparation. Store and inventory blood and blood components according to regulatory requirements. Monitor and maintain equipment, ensuring calibration and cleanliness. Comply with all safety procedures, infection control protocols, and laboratory best practices. Communicate with clinical and hospital staff regarding product availability and compatibility. Participate in internal and external audits, inspections, and staff training. Who Can Apply? Diploma or B.Sc. in Medical Laboratory Technology or equivalent is preferred 1-3 years of experience Ability to handle rejection and maintain motivation. Strong organizational skills and attention to detail. High school diploma or equivalent; a degree in business or healthcare is a plus What We Offer: Competitive base salary + performance-based incentives. Opportunities to grow within a mission-driven company.

Position - Trainee - Lab Technician Vacant Location - Saharanpur (UP) Note : Unpaid Internship for Six months Period. Role & responsibilities To perform assigned analytical testing procedures in an accurate, precise, and timely manner in the assigned lab. To perform routine and non-routine activities pertaining to laboratory testing and reporting and maintaining external and Internal Quality control Maintain required records and documentation. Follow the laboratory's procedures for specimen handling and processing, test analyses, reporting and maintaining records of patient test result. Analyze specimens using approved testing procedures as per SOP's, review and release test results. Adhere to the laboratory's quality control policies, instrument and procedural calibrations and follow safety guidelines as per established organization protocols. Qualification: - Pursuing DMLT/ BSc MLT Experience: - Fresher Interested candidates can share their CV at Jyoti1.lpl@lalpathlabs.com or WhatsApp: - 9817416906

As a Chemist , you will be responsible for conducting chemical analyses, experiments, and research in our laboratory. Your primary duties will include performing quality control tests, developing and validating analytical methods, analyzing raw materials and finished products, and documenting findings. This role requires a strong understanding of chemical principles, hands-on experience with laboratory instrumentation, and a meticulous approach to ensure accuracy and compliance. Responsibilities Laboratory Analysis & Testing: Perform routine and non-routine chemical tests and analyses on raw materials, in-process samples, and finished products using various analytical techniques and instrumentation (e.g., HPLC, GC, UV-Vis, Karl Fischer, Titration, pH meter, FTIR specify relevant instruments ). Conduct quantitative and qualitative analyses to determine composition, purity, and other chemical properties. Ensure all tests are performed accurately, efficiently, and in accordance with standard operating procedures ( SOPs ). Quality Control & Assurance: Monitor product quality at various stages of production to ensure compliance with established specifications and quality standards. Identify deviations, out-of-specification results, and non-conformities, and report them promptly. Participate in root cause analysis for quality issues and support corrective and preventive actions ( CAPA ). Method Development & Validation (if applicable): Develop, optimize, and validate new analytical methods for testing various substances. Verify the accuracy, precision, and robustness of existing analytical methods. Instrumentation Maintenance & Calibration: Perform basic maintenance and calibration of laboratory instruments to ensure their optimal performance and accuracy. Troubleshoot instrument malfunctions and coordinate with service engineers for repairs. Documentation & Reporting: Accurately record all experimental data, observations, and results in lab notebooks and designated systems. Prepare detailed analytical reports, certificates of analysis (CoA), and summaries of findings. Maintain organized laboratory records and documentation for audit purposes. Safety & Compliance: Strictly adhere to all laboratory safety protocols, chemical handling procedures, and waste disposal guidelines. Ensure compliance with Good Laboratory Practices ( GLP ), Good Manufacturing Practices ( GMP if applicable in pharma/food), and other relevant regulatory requirements ( e.g., ISO standards ). Maintain a clean and organized laboratory workspace. Research & Development Support (if applicable for R&D roles): Assist in research projects, experimental design, and data interpretation for new product development or process improvement.

Preparation and Standardization of Volumetric solutions. Knowledge about capa analysis and customer audits Handling to instrument such as GC, HPLC, KF, PH Meter Sampling of Raw materials and Finish Goods. Maintain QC instruments ISO Documentation.

IET Bhaddal Technical Campus, Ropar is looking for LAB TECHNICIAN to join our dynamic team and embark on a rewarding career journey Assist with testing and calibrating lab equipment in preparation for specific tasks Analyze retrieved data and prepare reports for laboratory management Experience in data collection and interpretation as well as the storage and retrieval of samples in a laboratory setting.

Alembic Group is looking for Senior Executive - Digi Labs to join our dynamic team and embark on a rewarding career journey Leading the full audit cycle by checking tax compliance, verifying financial records, and inspecting accounts. Analyzing the results of the audit and presenting possible solutions for ineffective financial practices to management. Evaluating company accounting procedures, payroll, inventory, and tax statements to guide financial policymaking. Conducting risk assessments to recommend aversion measures and cost savings. Following up with management to ensure remediations are implemented into the company's financial practices. Supervising junior auditing personnel and implementing their research work into the auditing process. Preparing and reviewing annual audit memorandums. Researching applicable federal and state laws and regulations to ensure the company's books are compliant.

Profile: Medical Lab Incharge Onsite and Permanent Job description: Roles and Responsibilities: - Authorize release of test report based on the Buyers protocol & test methods - On time responds to Buyers & clients queries, emails and calls - Responsible for reviewing revisions, updates on test parameters, protocols and regulations, etc. and circulating these to the concerned lab team - Training lab staff as per updated, revised protocol received from clients and brands - Support team to develop capability on new test parameters as received in buyer protocol - Training & Supervising the handling, operating and maintenance of test equipment. - Supervising preparation and maintenance of document as per requirement of ISO 17025 - Monitor accuracy of ILC/ PT programs and timely delivery of Test results and Test reports - To monitor NABL and Buyers/ clients accreditation process & correlation activities - Responsible for efficient operations of testing lab. - Responsible for on-time delivery of test reports and maintaining TAT - Responsible for development of new test methods required as per revisions and updates - Seek approvals for revision of test reports, Invoices - Ensure AMC/ CMC for test instruments, Calibration tools, standard reference materials are in place. - Coordinate with QM/ Quality executive to respond and resolve customer complaints / claims, non-conformances and in the corrective and preventive action This job opening was posted long time back. It may not be active. Nor was it removed by the recruiter. Please use your discretion.

Roles and Responsibilities: - Authorize release of test report based on the Buyers protocol & test methods - On time responds to Buyers & clients queries, emails and calls - Responsible for reviewing revisions, updates on test parameters, protocols and regulations, etc. and circulating these to the concerned lab team - Training lab staff as per updated, revised protocol received from clients and brands - Support team to develop capability on new test parameters as received in buyer protocol - Training & Supervising the handling, operating and maintenance of test equipment. - Supervising preparation and maintenance of document as per requirement of ISO 17025 - Monitor accuracy of ILC/ PT programs and timely delivery of Test results and Test reports - To monitor NABL and Buyers/ clients accreditation process & correlation activities - Responsible for efficient operations of testing lab. - Responsible for on-time delivery of test reports and maintaining TAT - Responsible for development of new test methods required as per revisions and updates - Seek approvals for revision of test reports, Invoices - Ensure AMC/ CMC for test instruments, Calibration tools, standard reference materials are in place. - Coordinate with QM/ Quality executive to respond and resolve customer complaints / claims, non-conformances and in the corrective and preventive action

Profile: Medical Lab Incharge Onsite and Permanent Job description: Roles and Responsibilities: - Authorize release of test report based on the Buyers protocol & test methods - On time responds to Buyers & clients queries, emails and calls - Responsible for reviewing revisions, updates on test parameters, protocols and regulations, etc. and circulating these to the concerned lab team - Training lab staff as per updated, revised protocol received from clients and brands - Support team to develop capability on new test parameters as received in buyer protocol - Training & Supervising the handling, operating and maintenance of test equipment. - Supervising preparation and maintenance of document as per requirement of ISO 17025 - Monitor accuracy of ILC/ PT programs and timely delivery of Test results and Test reports - To monitor NABL and Buyers/ clients accreditation process & correlation activities - Responsible for efficient operations of testing lab. - Responsible for on-time delivery of test reports and maintaining TAT - Responsible for development of new test methods required as per revisions and updates - Seek approvals for revision of test reports, Invoices - Ensure AMC/ CMC for test instruments, Calibration tools, standard reference materials are in place. - Coordinate with QM/ Quality executive to respond and resolve customer complaints / claims, non-conformances and in the corrective and preventive action

Profile: Medical Lab Incharge Onsite and Permanent Job description: Roles and Responsibilities: - Authorize release of test report based on the Buyers protocol & test methods - On time responds to Buyers & clients queries, emails and calls - Responsible for reviewing revisions, updates on test parameters, protocols and regulations, etc. and circulating these to the concerned lab team - Training lab staff as per updated, revised protocol received from clients and brands - Support team to develop capability on new test parameters as received in buyer protocol - Training & Supervising the handling, operating and maintenance of test equipment. - Supervising preparation and maintenance of document as per requirement of ISO 17025 - Monitor accuracy of ILC/ PT programs and timely delivery of Test results and Test reports - To monitor NABL and Buyers/ clients accreditation process & correlation activities - Responsible for efficient operations of testing lab. - Responsible for on-time delivery of test reports and maintaining TAT - Responsible for development of new test methods required as per revisions and updates - Seek approvals for revision of test reports, Invoices - Ensure AMC/ CMC for test instruments, Calibration tools, standard reference materials are in place. - Coordinate with QM/ Quality executive to respond and resolve customer complaints / claims, non-conformances and in the corrective and preventive action

Roles and Responsibilities: - Authorize release of test report based on the Buyers protocol & test methods - On time responds to Buyers & clients queries, emails and calls - Responsible for reviewing revisions, updates on test parameters, protocols and regulations, etc. and circulating these to the concerned lab team - Training lab staff as per updated, revised protocol received from clients and brands - Support team to develop capability on new test parameters as received in buyer protocol - Training & Supervising the handling, operating and maintenance of test equipment. - Supervising preparation and maintenance of document as per requirement of ISO 17025 - Monitor accuracy of ILC/ PT programs and timely delivery of Test results and Test reports - To monitor NABL and Buyers/ clients accreditation process & correlation activities - Responsible for efficient operations of testing lab. - Responsible for on-time delivery of test reports and maintaining TAT - Responsible for development of new test methods required as per revisions and updates - Seek approvals for revision of test reports, Invoices - Ensure AMC/ CMC for test instruments, Calibration tools, standard reference materials are in place. - Coordinate with QM/ Quality executive to respond and resolve customer complaints / claims, non-conformances and in the corrective and preventive action

Profile: Medical Lab Incharge Onsite and Permanent Job description: Roles and Responsibilities: - Authorize release of test report based on the Buyers protocol & test methods - On time responds to Buyers & clients queries, emails and calls - Responsible for reviewing revisions, updates on test parameters, protocols and regulations, etc. and circulating these to the concerned lab team - Training lab staff as per updated, revised protocol received from clients and brands - Support team to develop capability on new test parameters as received in buyer protocol - Training & Supervising the handling, operating and maintenance of test equipment. - Supervising preparation and maintenance of document as per requirement of ISO 17025 - Monitor accuracy of ILC/ PT programs and timely delivery of Test results and Test reports - To monitor NABL and Buyers/ clients accreditation process & correlation activities - Responsible for efficient operations of testing lab. - Responsible for on-time delivery of test reports and maintaining TAT - Responsible for development of new test methods required as per revisions and updates - Seek approvals for revision of test reports, Invoices - Ensure AMC/ CMC for test instruments, Calibration tools, standard reference materials are in place. - Coordinate with QM/ Quality executive to respond and resolve customer complaints / claims, non-conformances and in the corrective and preventive action

Individual who performs laboratory tests, prepares samples, produces accurate & reliable data. They follow procedures, adhere to safety guidelines, maintain equipment. They contribute to the collection of valid results in a laboratory environment.Role & responsibilities

Key Responsibilities: Perform pickups and deliveries across assigned locations in Bangalore Collect documents, parcels, and materials as per operational needs. Assist with dispatch, stock movement, and inter-departmental coordination. Maintain proper documentation of deliveries and receipts. Ensure timely and accurate handover of items to concerned personnel. Support the team in urgent errands, including bank, pharmacy, or vendor visits. Communicate efficiently with supervisors and team members. Follow company protocols and maintain confidentiality of documents/items. Handle the vehicle (bike/scooter) responsibly and ensure its upkeep (if applicable). Requirements: Mandatory Documents: Valid Aadhaar Card Valid Driving License or Learning License (for two-wheeler) Skills & Qualities: Good knowledge of Bangalore local geography and routes Ability to work under pressure and manage time effectively Punctual, honest, and reliable Basic communication skills (Hindi/Marathi preferred) Preferred: Prior experience in delivery, field operations, or support roles.

We are seeking a detail-oriented and analytical Quality Engineer to join our team. The ideal candidate will be responsible for ensuring that products and processes meet established quality standards through effective planning, monitoring, and continuous improvement initiatives. You will collaborate with cross-functional teams to identify root causes, implement corrective actions, and drive quality improvements throughout the organization. Role & responsibilities 1. Pre-Delivery Checks Mix Design Approval: Confirm the concrete mix design is approved and matches the project specification (e.g., M20, M25). Raw Material Quality: Verify the quality and test reports of cement, aggregates, water, and admixtures. Batching Plant Audit: Inspect calibration of batching plant, weigh scales, and proper storage of materials. 2. During Delivery (Transit Mixer) Slump Test: Ensure workability using a slump cone test . Temperature Check: Measure concrete temperature Transit Time: Confirm concrete is poured within 90 minutes from batching. Visual Inspection: Check for segregation, consistency, and homogeneity. 3. On-Site Tests Cube Casting: Take 6 cubes per batch (commonly) for compressive strength tests (e.g., 7-day, 28-day). Slump Recheck (if delay): Perform another slump test if concrete is delayed. Placement Supervision: Ensure proper pouring, vibration, and compaction. 4. Post-Pouring Curing Check: Monitor curing methods Cube Testing: Ensure lab tests are done on time and results recorded. Documentation: Maintain batch tickets, test reports, delivery notes. 5. Segregation A Quality Engineer Should be able to identify the causes like excessive vibration , high slump, improper handling. Recommend the preventive measures like correct batching , proper transportation , placement techniques . Inspect for segregation during pouring and compacting . Ensure corrective actions are taken if segregation is observed . Preferred candidate profile . Bachelors degree or above in Civil Engineering or related field . Demonstrated experience in a similar role . Excellent computer skills, previous experience with project management software . Strong analytical skills, with keen attention to detail . Strong communication skills, both written and verbal . Able to work to agreed deadlines and timescales . Demonstrated knowledge of health and safety guidelines . Good problem-solving abilities

Role & responsibilities Reviewing slides & Validation of test reports of the Laboratory Ensuring Control on TAT, Consumption, Lab Expenses, OT and Inventory management Supervises day to day administration of the Laboratory Zero NCs in various Lab Audits like NABL, CAP, ISO9000 & Clinical Trials Maintaining the cost of operations within budget Ontime release of reports with 100% accuracy Employee Retention No Pre-Analytical Errors Smooth cross-functional coordination Preferred candidate profile: Qualification : MD Pathology/ DCP/ DNB Experience : 0 4 Years

Role & responsibilities Role & responsibilities: Reviewing slides & Validation of test reports of the Laboratory Ensuring Control on TAT, Consumption, Lab Expenses, OT and Inventory management Supervises day to day administration of the Laboratory Zero NCs in various Lab Audits like NABL, CAP, ISO9000 & Clinical Trials Maintaining the cost of operations within budget Ontime release of reports with 100% accuracy Employee Retention No Pre-Analytical Errors Smooth cross-functional coordination Preferred candidate profile: Qualification : MD Pathology/ DCP/ DNB Experience : 0 4 Years

Role & responsibilities Role & responsibilities: Reviewing slides & Validation of test reports of the Laboratory Ensuring Control on TAT, Consumption, Lab Expenses, OT and Inventory management Supervises day to day administration of the Laboratory Zero NCs in various Lab Audits like NABL, CAP, ISO9000 & Clinical Trials Maintaining the cost of operations within budget Ontime release of reports with 100% accuracy Employee Retention No Pre-Analytical Errors Smooth cross-functional coordination Preferred candidate profile: Qualification : MD Pathology/ DCP/ DNB Experience : 0 4 Years

shroffsfoundation is looking for Lab Technician to join our dynamic team and embark on a rewarding career journeyAssist with testing and calibrating lab equipment in preparation for specific tasksAnalyze retrieved data and prepare reports for laboratory managementExperience in data collection and interpretation as well as the storage and retrieval of samples in a laboratory setting.

Role & responsibilities Location: Baddi Reports To: GM Department: Research & Development Job Summary: We are looking for a dynamic and skilled R&D Manager to oversee the development of innovative and high-quality cosmetic and personal care products. The ideal candidate should have hands-on experience in formulation development, strong knowledge of cosmetic regulations, and the ability to lead projects from concept through commercialization. Key Responsibilities: Product Development: Lead the formulation and development of skincare, haircare, and personal care products, ensuring alignment with brand goals and consumer expectations. Project Management: Manage multiple R&D projects, timelines, and deliverables across various product categories. Formulation & Testing: Supervise lab trials, stability studies, performance testing, and scale-up processes. Documentation & Compliance: Prepare and maintain formulation records, product dossiers, and ensure regulatory compliance (BIS, FDA, EU, etc.). Raw Material Evaluation: Source and evaluate new raw materials in collaboration with procurement and suppliers. Team Supervision: Manage and mentor junior chemists, technicians, and interns within the R&D lab. Cross-functional Coordination: Collaborate with marketing, QA/QC, production, and packaging teams to ensure product feasibility and quality. Innovation & Trends: Stay updated with market trends, consumer insights, and technological advancements to fuel innovation. Qualifications & Experience: Bachelors or Masters degree in Cosmetic Technology, Chemistry, Pharmaceutical Sciences, or related field. 5–8 years of hands-on experience in the cosmetic or personal care industry. Solid understanding of formulation chemistry, manufacturing processes, and cosmetic regulations. Proficiency in managing lab operations, stability testing, and product documentation. Preferred Skills: Experience in natural/organic/clean beauty product development. Familiarity with global cosmetic ingredient standards and labeling regulations. Strong organizational, analytical, and communication skills.

Competencies Overall Feedback To ensure PTCED output and its production related activities.To Control CED/Paint defects due to Process.To perform the various lab testing required for PTCED.To Coordinate and provide supporting hand to customers (Internal and External.To Monitor and control absenteeism on line by planning of cell members leave.To find cost effective solution for the consumable Items by monitoring, suggesting, implementing I4 ideas/Kaizens.To create a conducive environment for safe and engaged working.To maintain safety of Equipments by monitoring safety interlocks.Hands on experience of handling PTCED line, Knowledge of Paint shop Equipments like spray guns, pumps, blowers, burners.Understanding of ED/Paint defects and Troubleshooting.Knowledge of Manufacturing process and Supplier processes.Knowledge of TPM.Knowledge of Quality tools and systems.Knowledge of Best practices in Industry Preferred Industries Manufacturing Education Qualification Diploma; Bachelor of Engineering General Experience 3-7 Years Critical Experience System Generated Core Skills System Generated Secondary Skills

Organize and conduct uric acid detection camps in clinics.do the screening with the help of automated machines for uric acid. DMLT Degree is a must. preferred immediate joiner. Connect us on 8657885651 or email: hr2@saarathihealthcare.com Required Candidate profile Degree in DMLT or similar is a must. Preferred Male candidate. Fixed Salary + TA Perks and benefits Get Travel allowance