Purpose / Role Perform the 3D modelling, design activities and prepare the 3D model, drawings assigned to him by the Chief Engineer, in full respect of Contract, Quality, Safety, and Environment requirements, within the Specific Time Schedule and Cost. Key aims and objectives Support Electrical Chief Engineer during the project development. Prime responsibilities and duties Prepare 3D Electrical Models and deliverables assigned, in line with the project schedule and Clients technical documentation and requirements Prepare plans and schematics for electrical systems Prepare layout and detailed drawings for electrical works, based on calculations and specifications Prepare and update sound and reliable MTOs, cable lists, and quantity estimates for electrical works Allied occasional duties Check of detail drawings produced by of external resources. Key internal interfaces Electrical Discipline Manager Electrical Chief Engineer Electrical Engineering Team Project Engineers/Project Engineering Managers Other Disciplines Engineers Key external interfaces Electrical Equipment & System Vendors Engineering Sub-contractors Core competencies Educational qualification : Bachelor degree / Diploma in Electrical Engineering Total years of Experience : 5 – 10 years Prime responsibility will be to develop 3D model for Electrical works using REVIT / SP3D software. 3D modelling of cable ladders, cable trays and cable routes in Industrial plants / Power stations. 3D modeling of electrical equipment such as transformers, motors, switchgear panels, lighting & small power distribution boards, light fixtures, junction boxes, switches, and sockets. Extract 2D drawings from 3D models and prepare for submission. Collaborate with multidisciplinary engineering teams and detect / raise / resolve clashes in 3D Models. Prepare Bill of Materials (BOM) for electrical items. Software REVIT SP3D AutoCAD Transferable competencies Time Management Teamwork Ability Proactivity
Role & responsibilities Civil designer -Taking responsibility for engineering of the assigned structures/foundation Modelling as per inputs & extracting /checking of General Arrangement & Detail Drawings Reporting to Lead Civil Designer Lead Civil Engineer/ Coordination with other disciplines & project Meeting the project schedules on submissions of Civil deliverables Ensuring all deliverables comply with quality as per FW /Client specifications & standards. Preferred candidate profile D.C.E /D.M.E with 4 to 10 years experience is preferable. Specialist Designer in 2D /3D Modelling & Detailing of Civil & Structural works Must have worked in AutoCAD /PDMS/TEKLA software in 2D/3D software of both Concrete and steel works Experience in at least one Oil & Gas project in Civil or Structural Must have sound technical knowledge in Civil or Structural Hands-on experience on model review/Clash check in SPR/Navis review platform is advantageous. Equipment foundation such as Heat Exchanger, Vertical & Horizontal vessels/drum, Columns/ Tower, Compressor & pumps Control room & Substation buildings. Experience in the production of deliverables such as General arrangement drawings for Civil & steel works, RC Detail drawings, Steel connection detail drawing, Review of Fabrication drawings, UG service lay outs & Isometric. Working experience in using Indian and any one of British or American standards for Civil & structural works on structural steel section & RC detailing is added advantage.
Role & responsibilities Provide civil/structural engineering expertise to a variety of Oil & Gas/ Petrochemical/ Refinery Projects. Perform FEED and detailed design engineering, analysis and calculations on more complex and demanding engineering tasks. Prepare clear and accurate detailed design calculations and analyses including design reports and procedures. Perform Structural Design and Analysis of concrete and steel structures. Should be on good on the application of Structural engineering software viz. STAAD PRO, SAP2000, Robot and MS Office for manual calculations to produce high-quality engineering as per Industry and Safety standards with minimum guidance Preparation of load combinations & Dynamic analysis of the structures. Knowledge and exposure to Onshore Industry Engineering standards & Codes - API, AISC, ASCE, BS, EURO, OSHA, ACI, AWS etc., Preferred candidate profile BE/B. Tech- Civil with 6 to 15 years of experience in FEED, Design & detail engineering of EPCM Projects of Oil & Gas, Refinery, and Petrochemicals. Demonstrated ability towards load calculation, structural analysis, sizing, and design and report preparation. Detailed design experience in steel & concrete structures, and different foundation systems. Review of structural calculations performed by junior structural engineers. Represent structural discipline in interdisciplinary reviews Education Bachelor's degree in civil engineering, or a related field. Master's degree in structural analysis is a plus Personal Attributes: High level of professionalism and integrity. Strong attention to detail and organizational skills. Ability to work independently as well as part of a team. Proactive and results-oriented mindset.
Job description Position Summary: Responsible for overseeing and managing all piping activities within the India office. Leads the local engineering team, ensuring projects meet international standards, local regulations, deadlines, budgets, and quality and safety requirements. Education And Experience: BE/B.Tech degree- Mechanical/Chemical Engineer. Overall 20+ years of experience in the EPC and Detail Design Companies Oil & Gas/ Petrochemical/ Refinery/Power/Hydrogen Projects. Minimum experience 10 years as HOD or Lead Piping engineer with Leading and reputed Engineering EPC and Detail Design companies. Experience on Proposals, FEED, Detail Engineering, Site Support Construction & As- Built Phases of Project. Brownfield & Greenfield Project Execution Experience You have good past experience in working on SP3D, E3D/PDMS, Plant 3D softwares and Auto CAD. You are fluent in English. Problem-solving attitude; results-oriented Key Responsibilities: Team Management: Lead, motivate, and develop the local piping engineering and technical team. Project Supervision : Oversee piping design, engineering, procurement, ensuring compliance with standards (e.g., ASME, IS codes). Standards & Regulations: Ensure adherence to local and international codes; keep team updated on regulatory changes. International Collaboration: Coordinate with global teams and clients, facilitating effective communication. Quality & Safety Control: Implement and monitor Company quality and safety procedures; Cost & Schedule Management: Monitor project budgets and timelines; address deviations promptly. Innovation & Continuous Improvement: Promote new technologies and methodologies to optimize piping activities Skills & Competencies: Specify piping materials and components based on project requirements and industry standards. Manage day to day operations, short- and long-term objectives of IIEPL Piping department. Overall Responsibility for IIEPL Piping cost, schedule & budget control . Further develop and strengthen Piping department to meet IIEPL business objectives. Ensure workload planning & resource allocation to Incico jobs (Italy, Middle East & Local Indian jobs). Proactive attitude having knowledge of international codes & Standards . Extensive knowledge & application of ASME B31.1/ B31.3 and EN Codes . Manage Piping engineering works subcontracted to third party engineering agencies as and when required. Integrate Incico Work processes & department procedures in IIEPL Piping successfully. Review & approve key piping deliverables: - equipment layout, piping layout, GAD’s, Isometrics, stress reports, support drawings, MTO/BOM, etc. Through knowledge of 3D modelling processes, tools, and procedures. Should be able to guide the modelers for preparation of 3D models of Incico jobs. Responsible for quality control and technical accuracy of all deliverables from the IIEPL Piping team. Follow-up and verification of engineering, documentation and/or drawings. Study & analysis of client plot plan, design basis, SOW, Piping classes, wall thickness Calculations & technical specifications. Overview & response to Client/Vendor Technical Queries/Site Requests etc. Review of client stress and support design basis, 3D- design basis etc. High degree of familiarity with Navisworks for review of 3d models. Review of 3D model to ensure compliance of Clients / Project specifications, Maintenance and accessibility, constructability, critical piping flexibility , etc. Piping Manhour Estimation experience for Offers & Proposals & also on the Project. Experienced in preparing Piping Deliverable List & Schedule for the Project. Participate in client, Engineering sub-contractor, vendors, and other internal and external stake holders meeting. Participate in Incico internal project review status meetings & responsible for correct reporting of progress, delays, change notices, performance measurement, lessons learned and close-out. Conduct performance reviews and support staff development and training needs . Required to run a Skill Development Program in the IIEPL Piping Discipline: - To develop junior piping engineers/designers by providing them proper trainings. The trainings are to be aimed at developing Strong Fundamental Piping Layout Concepts. Shall share Lessons learned & Best practices from current & past projects so that the whole team learns from past mistakes and does not repeat them. Identify, develop & manage a team of Inhouse engineers comprising of Materials, Layout & Stress ( subject matter experts ).
Job Overview We are seeking a motivated and technically skilled Intermediate Piping Engineer to join our engineering team. The successful candidate will be responsible for the design, layout, and coordination of piping systems in accordance with project requirements, industry standards, and client specifications. This role requires both technical proficiency and the ability to collaborate effectively within multidisciplinary teams. Key Responsibilities Develop and review piping layouts, isometrics, and support plans in coordination with other disciplines. Perform equipment nozzle orientation, pipe routing, and support location identification. Ensure compliance with applicable codes and standards (e.g., ASME B31.3, B31.1, EN, API). Prepare and check material take-offs (MTOs) and bill of materials (BoMs). Interface with mechanical, civil/structural, and instrumentation teams to resolve design issues. Support piping stress engineers by providing layout and support information. Participate in model reviews and client meetings. Provide technical support during construction, commissioning, and startup phases. Ensure timely delivery of quality documents in accordance with project schedules. Education And Experience: - BE/B.Tech degree- Mechanical with minimum 8 years piping design experience OR Diploma in Mechanical Engg. with minimum 10 years piping design experience Industry Experience - Oil & Gas/ Petrochemical/ Refinery/Power/Hydrogen/LNG Role experience - Piping Design Engineer with leading & reputed Engineering EPC companies. Detail Design Engineering Experience Excellent experience of working on E3D/PDMS/ESAPRO. A tool test in Incico India Office will be conducted with you to check your knowledge. AutoCAD 2D Knowledge is highly preferred. You are fluent in English (Professional Level). Skills & Competencies: - Ability to read & understand engineering documentation (P&ID, site- plot plan, isometrics, plan & section views , vendor drawings, etc.) Develops Piping layouts and 3D model designs for the projects using information provided in the form of data sheets, design basis Process Flow Diagrams/P&ids, Line Lists, Specifications, etc. Equipment & Piping 3D modelling for process equipment, tanks/vessels, valves, instruments, pipe, pipe supports and structural steel. Knowledge of Economic Piping & Equipment layout with focus on safety, accessibility, operability, maintenance ability & constructability. Knowledge of various Piping fittings & valves, end connection types, piping materials, inline components, piping speciality items , etc. Understanding of different type of piping systems and their specific requirements e.g high pressure, steam, flare, relief piping, tank yard, rack piping, utility cooling water, etc. Understanding of special process requirements e.g free draining, no-pocket, sloped, 2-phase lines etc. Strong understanding of pipe support types & use as per pipe span & flexibility requirements. Run 3D model reviews. High degree of familiarity with Navisworks. Extraction & Preparation of Equipment Layout Drawings, Piping General Arrangement drawings, plans/sections . Load Sketches & Input to civil team for Piping loads. Generates detailed piping isometrics extracted . Create bills of material (MTO) for the materials of construction required for the fabrication and/or installation of equipment and piping. Interdisciplinary coordination and updating of comments. Capability in the preparation of Pipe support details & layouts etc in both 2D and 3D environment. Interface with stress and pipe support engineers, construction, and suppliers during the preparation of piping design layouts. Review & comments on Vendor documents. To ensure Quality of piping deliverables issued by proper flow check, yellow line check P&id & 3D model clash detection analysis. Knowledge of ASME/EN and other Engineering codes, Environmental regulation, Local and National Codes and Regulations.
Identify different stress packages through review of P&IDs / Line Designation tables. Performs piping flexibility analysis (static and dynamic) for critical piping systems during preliminary design and detailed design phase of Project. Dynamic analysis capabilities including modal, harmonic and response spectrum analysis. Evaluate Stress, Displacement, Forces and moments on restraints for support design and Evaluate piping loads with in allowable nozzle loads. Perform analysis for sustained, thermal and multiple operating cases, occasional (viz winds, seismic, relief, hammer etc.) Perform pipe stress analysis for different equipment like Steam turbine, Compressors, Centrifugal Pumps, tanks, exchangers, heaters, columns, etc. Measure the effects of support settlement, safety relief valves, seismic loads, thermal cycle loads and wind. Analysis capabilities for Jacketed Piping system, Expansion joints piping system etc. Flange Leak Check. Provide pipe loading information to Civil/Structure. Resolve high pipe loads on equipment nozzles. Nozzle Flexibilities (WRC) and Stresses. Resolve high secondary stresses in piping. Perform pipe support design & calculations for statically and dynamically loaded supports. Selection of spring hangers, snubbers, struts, expansion bellows for pipe supports. Preparation and interpretation/review of stress calculations of relatively complex nature in high seismic zones. Locate and identify pipe supports on isometrics along with type of supports. Evaluation of local stresses via code cases. Support structure calculations using tools like STADD. Review and sign-off piping isometrics considering flexibility and supporting. Prepare complete documentation of the stress analysis and support design. Participates in reviewing and checking designs, drawings and data from suppliers. Review piping isometrics considering flexibility and supporting. Knowledge of design codes and standards applicable for Pipe Stress Analysis design work. Must be experienced in preparing/developing/maintaining the Standard Pipe Support Catalogue on the Project. Highly experienced in preparing Special Support Sketch/Drawing/Details from scratch & completing them with complete details/annotations for Construction/Fabrication of the support at site as per Client expectations. Update Master Specifications for pipe supports e.g. updating span tables, etc. Previous experience in SS, Alloy (High temp piping) & vibration susceptible piping suspports. Work with Structural Designers to incorporate pipe support details into structural drawing sets where applicable. Pipe Support MTO (steel, brackets, bolts, clips, etc.)preperation Good Communication Skills in English. Should be able to communicate within international projects. Able to communicate with supervising designers, other discipline designers and technical specialists to obtain technical information as required. Team player and willing to receive direction.
Role Objective The Instrumentation Senior 3D Modeler is responsible for providing expert-level support in the development, coordination, and management of detailed 3D models for instrumentation systems in industrial plant design. The position requires a high degree of technical proficiency with AVEVA E3D, combined with in-depth knowledge of instrumentation engineering, to ensure accurate and integrated design solutions that comply with project requirements, industry standards, and safety regulations Key Responsibilities Lead the creation, management, and coordination of detailed 3D instrumentation models using AVEVA E3D. Interpret and convert engineering documentation (P&IDs, datasheets, layout drawings) into accurate and integrated 3D models. Collaborate proactively with cross-disciplinary teams (piping, electrical, mechanical) to ensure consistent and clash-free design integration. Execute and supervise clash detection processes, coordinating with relevant disciplines for resolution. Ensure compliance with project specifications, engineering codes, and client requirements. Maintain and regularly update the 3D model database to reflect design changes and progress. Mentor junior modelers and contribute to their technical development within the team. Deliver high-quality engineering outputs such as layout drawings, isometric drawings, and detailed 3D views. Skills and Qualifications Minimum of 15 years of experience in 3D modeling with a focus on instrumentation for industrial plants. Extensive hands-on experience with AVEVA E3D software. Deep understanding of instrumentation systems, diagrams, and plant layout practices. Strong analytical skills and ability to resolve complex design issues independently. Solid knowledge of relevant industry standards and regulations (e.g., ISA, IEC). Excellent interpersonal and communication skills; experience working in multidisciplinary teams. Fluent in English; knowledge of Italian is considered a plus. Bachelors degree in a technical or engineering field is required; a Master’s degree is preferred.
Role Objective The Instrumentation Senior 3D Modeler is responsible for providing expert-level support in the development, coordination, and management of detailed 3D models for instrumentation systems in industrial plant design. The position requires a high degree of technical proficiency with AVEVA E3D, combined with in-depth knowledge of instrumentation engineering, to ensure accurate and integrated design solutions that comply with project requirements, industry standards, and safety regulations Key Responsibilities Lead the creation, management, and coordination of detailed 3D instrumentation models using AVEVA E3D. Interpret and convert engineering documentation (P&IDs, datasheets, layout drawings) into accurate and integrated 3D models. Collaborate proactively with cross-disciplinary teams (piping, electrical, mechanical) to ensure consistent and clash-free design integration. Execute and supervise clash detection processes, coordinating with relevant disciplines for resolution. Ensure compliance with project specifications, engineering codes, and client requirements. Maintain and regularly update the 3D model database to reflect design changes and progress. Mentor junior modelers and contribute to their technical development within the team. Deliver high-quality engineering outputs such as layout drawings, isometric drawings, and detailed 3D views. Skills and Qualifications Minimum of 15 years of experience in 3D modeling with a focus on instrumentation for industrial plants. Extensive hands-on experience with AVEVA E3D software. Deep understanding of instrumentation systems, diagrams, and plant layout practices. Strong analytical skills and ability to resolve complex design issues independently. Solid knowledge of relevant industry standards and regulations (e.g., ISA, IEC). Excellent interpersonal and communication skills; experience working in multidisciplinary teams. Fluent in English; knowledge of Italian is considered a plus. Bachelors degree in a technical or engineering field is required; a Master’s degree is preferred. .
Role Objective The Instrumentation Senior Engineer is responsible for leading the engineering and development of instrumentation systems for industrial plant projects. Acting as Instrumentation Project Leader, the engineer manages technical activities with increasing autonomy, ensuring compliance with project requirements, company procedures, and safety and quality standards, while respecting schedule and budget constraints. Key Responsibilities Review and comment on PFDs and P&IDs with regard to instrument representation. Prepare and review general and detailed instrumentation specifications. Develop material requisitions for instruments and bulk materials. Conduct technical bid evaluations of vendor proposals. Support package specialists with material requisitions, clarifications, and document reviews. Review and approve vendor documentation and coordinate integration with other disciplines. Provide input to related departments (e.g., cable interfaces, loads and dimensions, piping connections). Develop instrumentation design documents and technical layouts. Prepare 2D layouts for instrument and junction box arrangements, cable routing, pneumatic equipment, etc. Instruct the Automation & Control team on cabling, earthing, and grounding design. Prepare instrument hook-ups and material take-offs. Attend Factory Acceptance Tests (FATs) and manage punch lists for key instrumentation packages. Interface directly and independently with clients, vendors, and project teams. Participate in coordination meetings and site visits to gather or deliver engineering data. Support pre-commissioning, commissioning, and start-up activities as required. Skills and Qualifications Masters degree in a relevant technical or engineering discipline. Minimum of 10 years' experience in a similar role within an engineering company. Strong knowledge of P&IDs, schematic diagrams, and wiring diagrams. Familiarity with 3D modeling software is considered a plus. Strong organizational and interpersonal skills; ability to manage priorities across diverse teams. Proactive attitude, team-oriented mindset, and eagerness to learn. Fluent in English (spoken and written). Willingness to travel both in Italy and internationally for short or extended periods. Career Development The role offers clear opportunities for professional growth within the Instrumentation & Automation discipline. The Instrumentation Senior Engineer will be exposed to cross-functional project environments, international client interfaces, and evolving engineering challenges. Progression paths may include technical leadership roles, discipline coordination, or project engineering management, supported by continuous learning and development initiatives.
Job description Job Overview We are seeking a motivated and technically skilled Intermediate Piping Engineer to join our engineering team. The successful candidate will be responsible for the design, layout, and coordination of piping systems in accordance with project requirements, industry standards, and client specifications. This role requires both technical proficiency and the ability to collaborate effectively within multidisciplinary teams. Key Responsibilities Develop and review piping layouts, isometrics, and support plans in coordination with other disciplines. Perform equipment nozzle orientation, pipe routing, and support location identification. Ensure compliance with applicable codes and standards (e.g., ASME B31.3, B31.1, EN, API). Prepare and check material take-offs (MTOs) and bill of materials (BoMs). Interface with mechanical, civil/structural, and instrumentation teams to resolve design issues. Support piping stress engineers by providing layout and support information. Participate in model reviews and client meetings. Provide technical support during construction, commissioning, and startup phases. Ensure timely delivery of quality documents in accordance with project schedules. Education And Experience: - BE/B.Tech degree- Mechanical with minimum 8 years piping design experience OR Diploma in Mechanical Engg. with minimum 10 years piping design experience Industry Experience - Oil & Gas/ Petrochemical/ Refinery/Power/Hydrogen/LNG Role experience - Piping Design Engineer with leading & reputed Engineering EPC companies. Detail Design Engineering Experience Excellent experience of working on E3D/PDMS/ESAPRO. A tool test in Incico India Office will be conducted with you to check your knowledge. AutoCAD 2D Knowledge is highly preferred. You are fluent in English (Professional Level) . Skills & Competencies: - Ability to read & understand engineering documentation (P&ID, site-plot plan, isometrics, plan & section views, vendor drawings, etc.) Develops Piping layouts and 3D model designs for the projects using information provided in the form of data sheets, design basis Process Flow Diagrams/P&ids, Line Lists, Specifications, etc. Equipment & Piping 3D modelling for process equipment, tanks/vessels, valves, instruments, pipe, pipe supports and structural steel. Knowledge of Economic Piping Equipment layout with focus on safety, accessibility, operability, maintenance ability & constructability. Knowledge of various Piping fittings & valves, end connection types, piping materials, inline components, piping speciality items, etc. Understanding of different type of piping systems and their specific requirements e.g high pressure, steam, flare, relief piping, tank yard, rack piping, utility cooling water, etc. Understanding of special process requirements e.g free draining, no-pocket, sloped, 2-phase lines etc. Strong understanding of pipe support types & use as per pipe span & flexibility requirements. Run 3D model reviews. High degree of familiarity with Navisworks. Extraction & Preparation of Equipment Layout Drawings, Piping General Arrangement drawings, plans/sections. Load Sketches & Input to civil team for Piping loads. Generates detailed piping isometrics extracted. Create bills of material (MTO) for the materials of construction required for the fabrication and/or installation of equipment and piping. Interdisciplinary coordination and updating of comments. Capability in the preparation of Pipe support details & layouts etc in both 2D and 3D environment. Interface with stress and pipe support engineers, construction, and suppliers during the preparation of piping design layouts. Review & comments on Vendor documents. To ensure Quality of piping deliverables issued by proper flow check, yellow line check P&id & 3D model clash detection analysis. Knowledge of ASME/EN and other Engineering codes, Environmental regulation, Local and National Codes and Regulations.