6 Business Sustainability Jobs

As a Control Room Engineer/Lead Desk Engineer/Lead FGD/Switchyard Engineer at Adani Power Limited (APL), your primary responsibility will be to monitor and operate plant systems, including Boiler, Turbine, Generator, BOP, switchyard, and transformer area to ensure their optimal performance. You will be in charge of executing necessary start-up and shut-down procedures and maintaining a close observation of plant parameters to respond promptly to any deviations. In addition, you will be responsible for handling plant emergencies related to Boiler-Turbine-Generator (BTG) and switchyards, and coordinating responses effectively to minimize operational impact. Your role will also involve performing and monitoring Flue Gas Desulfurization (FGD) operations, maintaining equipment, promoting energy conservation, and ensuring environmental compliance. You will play a crucial part in promoting energy conservation across all activities, focusing on Specific Oil Consumption (SOC), Auxiliary Power Consumption (APC), Demineralized (DM) Water usage, and Heat Rate. Moreover, it will be essential for you to monitor critical chemistry parameters to ensure environmental compliance and operational efficiency. To ensure business sustainability, you will need to adhere to IMS, AWMS, DISHA, CHETNA guidelines within the department, maintain safety of personnel and equipment through proper training and adherence to safety protocols, follow Permit to Work (PTW) systems and Standard Operating Procedures (SOPs), and report any defects or problems in the plant to the shift in charge promptly. Additionally, you will be expected to contribute to the digitization and automation processes by executing comprehensive strategies to optimize operational efficiency, implementing automation solutions, and driving process and system improvements by adopting newer technologies and innovative ideas. To qualify for this role, you must hold a BE/B.Tech degree in Mechanical or Electrical Engineering or a related field from a recognized institution with a minimum of 3+ years of experience in power plant operations, particularly with a focus on thermal power plants. Previous experience in the power generation industry, specifically with thermal power plants, is highly preferred for this position.,

As a Team Lead Electrical Boiler/Turbine/Generator at Adani Power Limited (APL), your primary responsibility will be overseeing the electrical maintenance operations of the Boiler, Turbine, and Generator (BTG) unit. You will play a crucial role in ensuring the reliability and efficiency of all BTG equipment while upholding stringent safety and compliance standards. Embracing technological advancements through Digitalisation and automation will be key aspects of your role, along with fostering a culture of continuous improvement and team development. Your responsibilities will include planning and monitoring proper electrical maintenance for BTG in alignment with strategic plans, executing maintenance systems to prevent future issues, monitoring equipment testing parameters and reports, managing shutdowns and maintenance projects, troubleshooting equipment failures, and implementing various methodologies like RCA, MoC, FMEA, ZFO, and technical audits to maintain high operational standards. Additionally, you will be involved in budget preparation, spares inventory monitoring, overseeing improvement projects, managing business associates performance, handling purchase requests, ensuring timely completion of PM, CM, and condition monitoring, and participating in cross-site knowledge sharing to contribute to overall maintenance practices. You will play a vital role in ensuring business sustainability by adhering to safety protocols, compliance standards, and legal requirements. Spearheading Digitalisation and automation projects, embracing new technologies for system improvement, promoting a positive workplace culture, engaging with team members and business associates, managing manpower efficiently, and encouraging knowledge sharing will also be part of your responsibilities. To qualify for this role, you should hold a BE/B.tech in Electrical Engineering or a related field, with a Master's degree preferred. With 13+ years of experience in electrical maintenance within power generation or a related heavy industry, including expertise in the maintenance of BTG equipment, you will be well-equipped to excel in this position. Join Adani Power Limited and be a part of a dynamic team committed to operational excellence, innovation, and sustainable business practices.,

As a Head FQA at Adani Power Limited (APL), your role is crucial in driving operational excellence and reliability of plant systems through strategic planning and quality assurance processes. You will be responsible for managing quality, overseeing maintenance, implementing inspection checks, and ensuring high-quality standards during overhauls and equipment installations. Your leadership will play a key role in fostering a high-performance culture and continuous improvement within the department. Your responsibilities will include developing and executing strategic plans to ensure the healthiness and availability of all systems, implementing Root Cause Analysis to minimize boiler tube leakages, monitoring inspection checks to prevent failures, and overseeing regular maintenance activities. You will also be tasked with implementing quality assurance protocols, managing the department's budget, ensuring compliance with guidelines and legal requirements, and leading digitization and automation efforts to optimize operational efficiency. To excel in this role, you should possess a Bachelor's or Master's degree in Mechanical/Electrical/Civil Engineering or a related field, along with at least 15 years of experience in quality assurance/control, preferably in the power generation or related heavy industries. Candidates with a background in operational excellence and quality management systems will be preferred for this position. Your success in this role will depend on your ability to engage and develop your team, drive innovation and process improvements, collaborate with key stakeholders both internally and externally, and ensure adherence to safety protocols and legal requirements. By leading by example, fostering employee engagement, and promoting a culture of continuous improvement, you will contribute to the overall success and sustainability of Adani Power Limited.,

As a candidate for the position, your main responsibility will involve leading and supervising all laboratory operations related to environmental sampling, chemical analysis, and quality control of Air, Water, Soil, and plant biological parameters in accordance with ISO/IEC 17025:2017 standards. You will be tasked with developing and validating analytical methods for various samples, ensuring calibration and maintenance of analytical instruments, as well as leading the NABL accreditation process. Additionally, you will need to maintain inventory, prepare reports, and plan field monitoring activities. Furthermore, you will be expected to execute digitization strategies, implement automation solutions, and ensure business sustainability by adhering to various guidelines and maintaining safety protocols. Data management, analysis, and reporting will also be a crucial part of your role, where you will compile, analyze, and interpret environmental data to identify trends and prepare technical reports and presentations for stakeholders. To qualify for this position, you should hold an M.Sc. in Environmental Science, Chemistry, or a related field, along with at least 8 years of experience in environmental lab and field monitoring, including team leadership.,

As an Electrical Maintenance Lead at Adani Power Limited, a part of the esteemed Adani Group, your primary responsibility will be executing electrical maintenance activities for Balance of Plant (BoP) and Coal Handling Plant (CHP) systems, ensuring uninterrupted operations. Your role will involve conducting Annual Overhauling (AOH) and Comprehensive Overhauling (COH) to enhance system integrity and performance, managing resources such as business associates, and ensuring compliance with safety and legal standards to drive operational efficiency and business sustainability. Your key responsibilities will include: - Leading electrical BoP/CHP maintenance activities, including systems like RO Plant, Sea Intake, FGD, Hydrogen plant, DM plant, Conveyor belts, Crusher house, and Stacker Reclaimers, to ensure continuous operational reliability. - Developing and updating Standard Operating Procedures (SOPs), Job Safety Analyses (JSAs), and Standard Maintenance Plans (SMPs) for BoP/CHP and associated areas. - Implementing improvement projects and executing preventive, predictive, and corrective maintenance strategies to minimize downtime and extend equipment life. - Overseeing annual overhauling, managing maintenance during outages, troubleshooting equipment failures, and conducting equipment failure analysis. - Monitoring equipment performance, ensuring compliance with contractual obligations, and completing preventive and corrective maintenance activities in a timely manner. - Managing the condition and availability of all BoP/CHP equipment, inventory management, spares development, and testing of electrical equipment. - Implementing IMS, AWMS, DISHA, ABEM, and CHETNA guidelines, maintaining compliance with legal and statutory requirements, and ensuring the safety of personnel and equipment. - Executing comprehensive digitalization strategies, implementing process and system improvements, and monitoring data from digital systems to identify trends and opportunities for improvement. Key Qualifications and Experience: - Educational Qualification: BE/B.Tech in Electrical Engineering or a related field. - Work Experience: 11+ years of experience in electrical maintenance within power plants or heavy industries, preferably with experience in the power generation industry, specifically with BoP/CHP operations. In this role, you will play a critical part in ensuring the operational efficiency, reliability, and sustainability of electrical systems at Adani Power Limited. If you are a seasoned professional with a strong background in electrical maintenance and a passion for driving excellence in the power generation industry, we invite you to join our dynamic team and contribute to our ongoing success.,

You will be responsible for ensuring the availability and optimal performance of Control & Instrumentation (C&I) systems related to the Balance of Plant (BoP) area. This role involves strategic planning and execution of maintenance activities, coordination with other departments to enhance productivity, adoption of new technologies, and managing budgetary and manpower resources. Your main responsibilities will include: - Developing and executing strategic and tactical plans to ensure 100% availability of control and instrumentation systems related to Fire Alarm, CHP, Water Circuit, AHP, RO, CCTV, PA systems, and auxiliaries. - Regularly scheduling back-ups of Programmable Logic Controller (PLC) systems. - Monitoring and ensuring timely completion of Belt weigher and WT Weighbridge calibrations. - Coordinating with other departments to minimize delays and enhance productivity. - Implementing ZFO (Zero Forced Outage) and striving for zero human error. - Ensuring implementation and adherence to FMEA, MOC, RCA, and other safety and compliance directives. - Conducting short-term and long-term planning for routine maintenance and unit overhaul. - Overseeing plant improvement projects for system reliability and plant performance improvement. In addition, you will also be responsible for: - Preparing, reviewing, and managing section budget including CAPEX identification/implementation in alignment with organizational objectives. - Managing manpower within the section to align with budgetary constraints and operational needs. - Overseeing spares and inventory management, focusing on the development of indigenous spares for cost optimization. - Monitoring financial performance and implementing cost-saving measures. You will need to ensure adherence to IMS, AWMS, DISHA, and CHETNA guidelines within the department, as well as compliance with all legal and statutory requirements relevant to the department. Foster a culture of safety and compliance to achieve zero incidents. Leading and executing comprehensive digitization strategies, implementing automation solutions, reviewing and implementing process and system improvements, adopting newer technologies, and innovative ideas will also be part of your responsibilities. You will participate in the recruitment process to attract and retain skilled personnel for the C&I maintenance team, drive and enhance employee engagement and retention, lead, inspire, and mentor the team to foster a high-performance culture, and ensure proper succession planning within the team. Key stakeholders you will engage with include internal departments such as Environment & Sustainability, Operations & Maintenance, Security, Stores, and external stakeholders like Vendors and Business Associates. Qualifications: - Educational Qualification: Bachelor's degree in C&I or Electronics & Communication or equivalent degree. - Work Experience: 15+ years of experience in maintenance and operations, preferably in the power or heavy industries. Experience in power generation, with exposure to BoP operations, is preferred.,