Manufacture the organization's products according to production specifications and schedules; volume, cost, and wastage targets; and quality standards. 1. Operate machines and production equipment safely and in accordance with instructions. 2. Load materials into production machines in a timely and efficient manner. 3. Remove, pack, and sort raw materials or finished products. 4. Collect, and dispose of garbage and production waste according to the organization's waste removal and recycling policies. 5. Clean production equipment and work areas to ensure adherence to health and safety requirements. Work complexity and business impact: Works under moderate supervision. Problems are typically of a routine nature, but may at times require interpretation or deviation from standard procedures. Communicates information that requires some explanation or interpretation. Geographical scope: local Typical minimum relevant experience required: 1-3 years. Requires basic knowledge of job procedures and tools obtained through work experience.
“ Plant Engineer for Engineer – Pulp, Energy & Circularity (PEC) | Services Business Area (based in Chennai, India)” Are you an enthusiastic, self-driven and result-oriented professional who wants to improve our customer’s performance forward? We are looking for “ Plant Engineer ” to be based in Chennai, India. You have an opportunity to be part of the team that delivers projects & services globally to pulp and energy industry. You will be handling AP (Asia Pacific) services cases of Boiler Retrofit/ Upgrade projects and time to time provide support to global projects coming from HQ based in Finland / Sweden. The successful candidate is expected to perform the following tasks; Must have a sound technical knowledge on Plant Design / Layout / Piping Design - Expert level in piping routing, layout, and support concepts. Expert level in E3D modelling who can be relied on all aspects of modelling related to equipment, piping, supports, ducts, extraction of drawings and reports, clash resolution, etc. Maintain log of unresolved operational issues associated with PDMS/E3D and update it to the lead Administrator for solution. Create Model Review file daily to enable Engineering & Project Management team to have a detailed Model Review. Routing studies and preparing sketches for Drafting and 3D modelling 3D modelling (piping, equipment and supports) in E3D Plot Plan / Equipment Layout – Prepare / check Piping GA’s – Prepare / check Isometrics – Prepare / check MTO preparation and checking Supports selection, preparation & checking of support drawings. Pipe support modelling in E3D. Review contract documents and identify requirements and scope of work for project execution. Feasibility studies, Concept, FEED, detail design and procurement support, construction, testing & commissioning. Hands on knowledge of 3D Model review software like Navis. The ideal candidate is expected to hold the following. Bachelor / Master’s Degree in Mechanical engineering. 5-8 years of experience in Boiler Pressure Parts detail engineering. Knowledge of ASME / EN / IBR codes and standards and familiarity with industry best practices related to Pressure Parts design engineering is a must. Working knowledge in engineering tools such as AutoCAD, E3D & Comos is a prerequisite for this position. Effective written and oral communication skills in English. Willingness to travel to client sites >25% of time is required for this position. We offer: We offer you a rewarding position in a global industry leader in pulp and energy industries with the possibilities to grow professionally. If this sounds like something you are looking for and you are ready to go forward in your career, send your application with your CV via the link provided latest by 20th June 2025. Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in serving our customers. Our more than 19,000 professionals work close to our customers and are committed to improving our customers’ performance – every day. The company has over 220 years of industrial history and a strong track record in continuous improvement and renewal. Valmet’s net sales in 2022 were approximately EUR 5.1 billion. Valmet’s shares are listed on the Nasdaq Helsinki and the head office is in Espoo, Finland. At Valmet, we enhance circularity and environmental efficiency and reduce CO2 emissions through the entire value chain. Valmet aims to enable fully carbon neutral production for its customers by 2030. Join the team! www.valmet.com/careers
Engineer for Pulp and Energy Business Line (based in Chennai, India) Are you the enthusiastic, self-driven and result-oriented professional who wants to move our customer’s performance forward? We are looking for “Engineer” to be based in Chennai, India. This position reports to “Senior Manager, Engineering, India”. In this position you will have an opportunity to carry out all engineering activities associated with Piping for all kinds of projects and also carry out Plant design modeling wherever required and to play a lead engineer role if nominated in coordinating, directing and carry out all activities of engineering. In this position, you will be required to, Develop and carryout engineering for piping including layout, support engineering, detailed design and associated engineering calculations. To carryout basic modeling of Boiler & evaporator area consisting of various Equipment’s, platform, structures and other items considering various aspects such as operation, maintenance etc. Access requirements, load data for structures, general arrangement drawings etc. To interface with COMOS, Mfile etc. To coordinate with all agencies for receipt of inputs and maintain schedule. To provide deliverables meeting the quality requirements. Managing and development of the reporting engineers/Designers. To succeed this role, you will need: Bachelor Degree in Mechanical engineering. 5-12 years of experience in relevant field. Knowledge of Codes & Standards, PDMS, E3D and AutoCAD. Effective written and oral communication skills in English. We offer: We offer you a rewarding position in a global industry leader in pulp, paper and energy industries with the possibilities to grow professionally. If this sounds like something you are looking for and you are ready to go forward on your career, send your application with your CV via the link provided latest by 15 Feb 2025 . When everything works together, Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in serving our customers. Our more than 19,000 professionals work close to our customers and are committed to improving our customers’ performance – every day. The company has over 220 years of industrial history and a strong track record in continuous improvement and renewal. Valmet’s net sales in 2022 were approximately EUR 5.1 billion. Valmet’s shares are listed on the Nasdaq Helsinki and the head office is in Espoo, Finland. Join the team! www.valmet.com/careers
Engineer Specialist, Plant Engineering for Pulp, Energy & Circularity Business Area (based in Chennai, India) Are you the enthusiastic, self-driven and result-oriented professional who wants to move our customer’s performance forward by “Lead the way”? We are looking for “Engineer Specialist, Plant Engineering” to be based in Chennai, India. This position reports to “Manager, Engineering, India”. In this position you will have an opportunity to carry out all engineering activities associated with Plant Engineering for all kinds of projects and carry out Plant design modeling wherever required and to play a lead engineer role if nominated in coordinating, directing and carrying out all activities of engineering. In this position, you will be required to, Develop and carryout engineering for plant Engineering and associated engineering calculations related to Evaporator body, Tanks and Vessels. To carryout basic modeling of Boiler & evaporator area consisting of various Equipment’s, platform, structures and other items considering various aspects such as operation, maintenance etc. Access requirements, load data for structures, general arrangement drawings etc. To interface with COMOS, M File etc. To coordinate with all agencies for receipt of inputs and maintain schedule. To provide deliverables meeting the quality requirements. Managing and development of the reporting engineers/Designers. To succeed in this role, you will need: Mechanical Engineering Graduate with 10-15 years of Experience Minimum 5 years of exp. in detailing of Tanks and Vessels using software like AutoCAD, SolidWorks, etc., Exposure to ASME and EN codes. Exposure on software COMOS, M files, AutoCAD, E3D, Navis, PV Elite etc. Good communication skills in English. We offer: We offer you a rewarding position in a global industry leader in pulp, paper and energy industries with the possibilities to grow professionally. If this sounds like something you are looking for and you are ready to go forward on your career, send your application with your CV via the link provided latest by 5 Aug 2025. When everything works together, Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in serving our customers. Our more than 19,000 professionals work close to our customers and are committed to improving our customers’ performance – every day. The company has over 220 years of industrial history and a strong track record in continuous improvement and renewal. Valmet’s net sales in 2024 were approximately EUR 5.1 billion. Valmet’s shares are listed on the Nasdaq Helsinki and the head office is in Espoo, Finland. Join the team! www.valmet.com/careers
Engineer Specialist, Piping Engineering for Pulp and Energy Business Line (based in Chennai, India) Are you the enthusiastic, self-driven and result-oriented professional who wants to move our customer’s performance forward? We are looking for “Engineer Specialist, Piping Engineering” to be based in Chennai, India. This position reports to “Senior Manager, Engineering, India”. In this position you will have an opportunity to carry out all engineering activities associated with Piping for all kinds of projects and also carry out Plant design modeling wherever required and to play a lead engineer role if nominated in coordinating, directing and carry out all activities of engineering. In this position, you will be required to, Develop and carryout engineering for piping including layout, support engineering, detailed design and associated engineering calculations. To carryout basic modeling of Boiler & evaporator area consisting of various Equipment’s, platform, structures and other items considering various aspects such as operation, maintenance etc. Access requirements, load data for structures, general arrangement drawings etc. To interface with COMOS, Mfile etc. To coordinate with all agencies for receipt of inputs and maintain schedule. To provide deliverables meeting the quality requirements. Managing and development of the reporting engineers/Designers. To succeed this role, you will need: Mechanical Engineering Graduate with 10 - 15 years of Experience Minimum 5 years of exp. PDMS design tool (Currently working with PDMS) Piping Layout and Detail engineering with minimum 5 years exp. Detail engineering knowledge of Piping along with experience in support engineering Exposure to ASME and EN codes, Basic knowledge on flexibility analysis Good Communication skills in English We offer: We offer you a rewarding position in a global industry leader in pulp, paper and energy industries with the possibilities to grow professionally. If this sounds like something you are looking for and you are ready to go forward on your career, send your application with your CV via the link provided latest by 30 Oct 2024 . When everything works together, Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in serving our customers. Our more than 19,000 professionals work close to our customers and are committed to improving our customers’ performance – every day. The company has over 220 years of industrial history and a strong track record in continuous improvement and renewal. Valmet’s net sales in 2022 were approximately EUR 5.1 billion. Valmet’s shares are listed on the Nasdaq Helsinki and the head office is in Espoo, Finland. Join the team! www.valmet.com/careers
Job Description Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in serving our customers. Our more than 19,000 professionals work close to our customers and are committed to improving our customers performance every day. The company has over 220 years of industrial history and a strong track record in continuous improvement and renewal. Valmets net sales in 2022 were approximately EUR 5.1 billion. Valmets shares are listed on the Nasdaq Helsinki and the head office is in Espoo, Finland. Position- Global Supplier Quality engineer Job summary- This position is an individual contributor role. This position conducts supplier quality related activities including support to new product introduction with exiting and new supplier. Performing supplier qualification and re-qualification audits, supplier process development and audit, product audit. Drive supplier and product quality improvement. The role will work harmoniously together with Global cross function team mainly engineering and sourcing etc. Conduct the supplier site inspection, identify the Non conformities and plan the corrective action/Root cause analysis (RCA)with supplier on repetitive NCs Training to suppliers on Global quality procedures and harmonisation of Global procedures. Assign the Inspection plan to item/ PO line based on Claims data, past Supplier performance and Rejection trends. Monitor and Review Sample Evaluations (SEVAL)/Pilot lot inspection, Plant Feedbacks, and supplier Corrective actions. Root cause Analysis on Claims/failed parts and monitor the supplier corrective actions/RCA. Drive and facilitates the continuous improvement efforts at supplier to better control of Nonconforming products Support the supplier related corrective actions (CAR) ,verification and monitor effectiveness of actions, New supplier or part development. Qualifications Educational Qualification Bachelors of Engineering Mechanical or production engineering Professional Experience- 5 to7 years, Preferred experience in Valve industries or Casting and machining industries. Hand on experience in Operating the CMM (about 3 years) is desirable. In depth knowledge of GD&T, can understand drawing related with parts of mechanical. Preferred the specialized and experienced dimension controlling in the machined industry. Communicate proficiently verbally and written in English. Can work with cross functional team environment. Preferable Certified internal Auditor ISO 9001:2015 Experience in root cause analysis/problem solving, 8D etc Working knowledge of materials and specifications ASME, API,ANSI,ISO Familiar with knowledge in CS and SS Casting and Machining. Good PC skills including MS office-Excel,Word,PPT. experience in SAP/Orcle/ Powerapps/ Power BI Willing to travel at supplier locations Job Location- Lucknow UP ( Supplier site location) Valmet is where the best talent from a wide variety of backgrounds comes together. With over 19,000 professionals around the world, we are the leading global developer and supplier of technologies, automation and services for the pulp, paper and energy industries, and serve an even wider base of process industries with our automation systems and flow control solutions. Our commitment to moving our customers performance forward requires creativity, technological innovations, service know-how and above all, teamwork. Join the team! www.valmet.com/careers,
Are you an enthusiastic, self-driven, and result-oriented professional who wants to help improve our customers’ performance? We are looking for a Senior Engineer, Service, Sales Support to join our team in Mumbai, Godrej Two. In this role, you will: Key Responsibilities: 1. Provide best technical advice to the sales and service team and customers to develop, sell, and successfully implement product or service solutions that will meet the customer’s needs. 2. Good knowledge of valve spares and should have worked in spares support or service team. 3. Shall be able to understand and interpret customer specification and Prepare techno commercial quotations & meet customer requirements, expectations and delivery times. 4. Timely Response to customer enquiries and clarification post offer submission. 5. Support service team, sales, distributers and channel partners 6. Manage complaints and issues regarding customer orders, liaising where necessary with sales, service, finance and operations to solve order issues. 7. Liaise with product management to ensure that products and services are modified, configured, and offered according to customer needs. 8. Works independently to complete given tasks and activities, solving daily technical sales issues. 9. Processing orders, handle post order activities as Drawings, Quality plans and help the support function for smooth execution and invoicing of the order Experience & Skills: 6–8 years of experience in the spares business and valve industry. Strong knowledge of valve and accessory selection and sizing. Familiarity with e-tendering processes and customer-specific tender documentation. Understanding of commercial terms, GPC documents, and financial instruments (LC/SBLC/Bank Guarantees). Experience in finance, logistics, and import/export operations. Knowledge of Incoterms and international trade requirements. Proficiency in Microsoft Office tools (Excel, PowerPoint, etc.). Excellent communication skills in English. Qualification: B.Tech in Instrumentation Engineering or Mechanical Engineering. Why Join Valmet? At Valmet, we combine world-class technology with a strong focus on people. We believe in sustainability, innovation, and teamwork – and we know our employees are our most valuable assets. Here, you’ll have the opportunity to grow, make an impact, and help shape the future of the industry. When everything works together – Valmet is where the best talent comes together. With over 19,000 professionals globally, we are the leading developer and supplier of technologies, automation, and services for the pulp, paper, and energy industries. We also serve a broader range of process industries with our automation systems and flow control solutions. Ready to move your career forward? Apply now at www.valmet.com/careers
Are you ready for the next step in your career We are looking for a Manager, Compensation & Benefits for our Asia Pacific region to join Valmets Compensation and Benefits team. This is an exciting opportunity for an experienced Compensation & Benefits professional to work for a forward-looking company. As a region Compensation & Benefits manager, you are responsible for high-quality implementation of our global C&B processes in Asia Pacific. Your responsibilities would be to: - Develop, implement, and administer global and country-level compensation and benefits programs according to business needs and ensure local regulatory requirements and compliance are met. - Implement Valmet Global Compensation & Benefits guidelines, processes, tools, and projects in the region in cooperation with operational HR and business management to serve business needs. - Lead the integration of compensation and benefits programs following M&A/integration deals or setting up new operations. - Participate in global C&B process development as a member of the global C&B network, bring regional view and best practices to the attention of global C&B. - Provide process support, advice, and training for operational HR in the region regarding all C&B processes and practices. - Prepare and distribute information on C&B policies to raise awareness and spread knowledge. Your location will be Valmet Office in Laem Chabang, Chonburi, Thailand, or Chennai, India as the next priority. To be successful in this role, you should: - Have a relevant educational background, for example: Minimum of bachelor's degree in human resource, business management, or related field of education. Post-graduation is an added advantage. - Typically, have 10 years of work experience in the Human Resources field, out of which 5 years in a Compensation & Benefit position for any multi-country region (preferably Asia Pacific region), supporting a global business in a multi-cultural environment. - Possess solid expertise and a keen interest in Compensation and Benefits aspects for various kinds of roles (including manufacturing environment C&B matters). - Have excellent motivation and attitude, and the ability to achieve results under pressure. - Demonstrate strong analytical and problem-solving skills. - Have excellent written and spoken English skills along with effective communication and presentation skills. - Be willing and able to travel within the region as needed. - Possess networking skills and an ability to quickly build relationships and achieve results both individually and as part of a team. - Have relevant IT skills, for example MS Office with strong MS Excel skills. Any other relevant HR systems/tools are an added advantage. We offer: In addition to a competitive salary and benefits, we offer you a rewarding position in a high professional team supporting you with a global industry leader and a truly global network of colleagues as well as opportunities to learn, grow, and progress in your career! If you are interested and need further information, please contact Director, Compensation & Benefits, Minna Salla-Huttunen at +358 40 722 2824 preferably on Thursday, September 26, 2024, at 10:00-11:00 EET or Friday, September 27, 2024, at 9:00-10:00 (EET). We are looking forward to hearing from you. Please fill out our electronic application form and submit by 6 Oct 2024 at the latest. Additional information: We will review all applications when the deadline closes on 6 Oct 2024. The shortlisted candidates will be invited to a short online video interview. Following this, we plan to conduct further interviews, possibly face-to-face. You may visit our website www.valmet.com to know more about our organization Valmet. Valmet is where the best talent from a wide variety of backgrounds comes together. With 19,000 professionals around the world, we are the leading global developer and supplier of technologies, automation, and services for the pulp, paper, and energy industries. Our commitment to moving our customers" performance forward requires creativity, technological innovations, service know-how, and above all, teamwork.,
The position is mainly responsible for providing technical quotation and documentation support to the Sales team. You will work with different stakeholders in the organization to gather the documentation requirements of customers and ensure compliance with the documents. These documents will then be submitted for approval to the customer and clearance for manufacturing. Collaboration with Product Managers will be necessary to determine business needs and solutions. Understanding the techno-commercial proposal in line with customer technical requirements, commercial conditions of sales, and delivery times is crucial. Addressing customer techno-commercial queries and issues in a timely manner is also part of the role. Additionally, you will be responsible for generating installed base reports and spare part agreement proposals, as well as preparing SPIR in concurrence with the sales office. Providing product technical engineering information to customers and agents will be a key aspect of the job. Furthermore, you will need to review and handle portal enquiries of key customers. Knowledge in sizing and selection will be an added advantage. In terms of the network, you will collaborate with Operations, Engineering, Product Lines, FC Services, Customers, and agents. The ideal candidate should have a Bachelor's degree in engineering from a reputed institute and a minimum of 7-8 years of working experience in application or quotation preparation. Valves experience would be preferable. Knowledge of commercial terms and conditions of sales, Incoterms, international trade & finance requirements, as well as commercial documents such as LC/SBLC/Bank Guarantees, is required. Experience in finance and logistics related activities in ERP systems is necessary. Experience in supporting international sales offices through a centralized support team is preferred. Proficiency in Microsoft Office, Excel, and PowerPoint is essential. Good communication skills in English are required. The candidate must be motivated, proactive, assertive, and confident. Ability to work under pressure, systematic, independent, and creative thinking are essential qualities. Strong communication and team-player skills are necessary. Being customer and results-oriented is crucial. Flexibility in working hours and the ability to work in a multi-cultural and multi-language atmosphere are important. The candidate must be open to travel internationally as required and have exposure to plant/operations processes. Valmet is a global developer and supplier of technologies, automation, and services for the pulp, paper, and energy industries. With over 19,000 professionals worldwide, teamwork, creativity, technological innovations, and service know-how are valued. If you are looking to work with the best talent from diverse backgrounds, join our team at www.valmet.com/careers.,
Manufacture the organization's products according to production specifications and schedules; volume, cost, and wastage targets; and quality standards. 1. Operate machines and production equipment safely and in accordance with instructions. 2. Load materials into production machines in a timely and efficient manner. 3. Remove, pack, and sort raw materials or finished products. 4. Collect, and dispose of garbage and production waste according to the organization's waste removal and recycling policies. 5. Clean production equipment and work areas to ensure adherence to health and safety requirements. Work complexity and business impact: Works under moderate supervision. Problems are typically of a routine nature, but may at times require interpretation or deviation from standard procedures. Communicates information that requires some explanation or interpretation. Geographical scope: local Typical minimum relevant experience required: 1-3 years. Requires basic knowledge of job procedures and tools obtained through work experience.
You will be responsible for supporting the Sales and Quotation team in order handling, shipping, invoicing, and documentation. Your main responsibilities will include: - Working closely with the Sales and Quotation team to transfer orders to various ERP Systems, ensuring accuracy and compliance with customer requirements and contract documents. - Following up with the factory on order status, coordinating material readiness, and ensuring efficient deliveries. - Liaising with the factory and Country Sales Office to arrange logistic requirements and ensure compliance with shipment terms. - Coordinating with factories to prepare shipping documents, packing lists, and ensure logistics compliances. - Collaborating with the accounting department to prepare invoices and trade finance documents in accordance with contracts. - Providing freight cost estimation and shipment information to the Sales and Quotation team as needed. - Verifying factory or suppliers" invoicing against SAP Purchasing Orders. - Generating reports for Sales Projection, Finished Goods, Accounts Receivable, and providing information to management. - Maintaining accurate records of all sales reports. - Updating customer records in the ERP system and handling the claim process. You will need to interact with various stakeholders, including supply centers, distributors, finance, sales, and sales support teams, customers, and agents. To be successful in this role, you should have: - A Bachelor's degree or Diploma in Engineering from a reputable institute. - Experience in finance and logistics-related activities in ERP systems such as SAP. - Knowledge of Incoterms, international trade, and finance requirements. - Experience in supporting international Sales offices through a centralized support team. - Proficiency in commercial documents such as LC/SBLC/Bank Guarantees. - Minimum 3 years of relevant experience and 5 years overall experience. - Ability to work in a demanding environment and under pressure. - Good knowledge of Microsoft Office, Excel, and PowerPoint. - Strong communication skills in English, with knowledge of European languages like German or French being an advantage. You should be motivated, proactive, assertive, and confident, with a systematic and independent work approach. Additionally, you should be a strong team player with a customer and results-oriented mindset, flexibility in working hours, and the ability to work in a multicultural and multilingual environment.,
Are you an enthusiastic, self-driven, and result-oriented professional who wants to help improve our customers’ performance? We are looking for a Engineer, Service, Sales Support to join our team in Vadodara. In this role, you will: Key Responsibilities: 1. Provide best technical advice to the sales and service team and customers to develop, sell, and successfully implement product or service solutions that will meet the customer’s needs. 2. Good knowledge of valves, actuator spares and should have worked in spares support or service team. 3. Shall be able to understand and interpret customer specification and Prepare techno commercial quotations & meet customer requirements, expectations and delivery times. 4. Timely Response to customer enquiries and clarification post offer submission. 5. Support service team, sales, distributers and channel partners 6. Manage complaints and issues regarding customer orders, liaising where necessary with sales, service, finance and operations to solve order issues. 7. Liaise with product management to ensure that products and services are modified, configured, and offered according to customer needs. 8. Works independently to complete given tasks and activities, solving daily technical sales issues. 9. Processing orders, handle post order activities as Drawings, Quality plans and help the support function for smooth execution and invoicing of the order Experience & Skills: 3–5 years of experience in the spares business and valve industry. Strong knowledge of valve and accessory selection and sizing. Familiarity with e-tendering processes and customer-specific tender documentation. Understanding of commercial terms, GPC documents, and financial instruments (LC/SBLC/Bank Guarantees). Experience in finance, logistics, and import/export operations. Knowledge of Incoterms and international trade requirements. Proficiency in Microsoft Office tools (Excel, PowerPoint, etc.). Excellent communication skills in English. Qualification: B.Tech in Instrumentation Engineering or Mechanical Engineering.
HSE Manager, Customer Projects and sites and social responsibility in Global Supply (based in Chennai, India) Are you the enthusiastic, self-driven and result-oriented professional who wants to move our customer’s performance forward by “Leading the way”? We are looking for a “HSE Manager” to be based in Chennai, India. This position reports to “Director or Manager, HSE, Customer Projects and sites” and in matrix to the India country HSE manager. In this position you will have an opportunity to secure health, safety, environmental and social responsibility implementation and development of our Global Customer projects and construction sites in India, Indonesia and some other Asian countries. We are seeking a dynamic team player to join our team. In this position, you will be required to , Provide project HSE manager and engineer services in nominated EPC and high-risk EPS sales and delivery projects, including readiness for ad hoc and pre-planned site presence even for longer durations. Provide on-site safety officer services in nominated large shutdown work and short projects. Train and coach Valmet project and site organizations, including partners contracted as supervisors for site work, on Valmet project and site HSE management and social responsibility process and practices. Identify and coordinate the HSE partner network Arrange Sub-contractor HSE Days Participate in sub-contractor audits and lead site HSE audits. Ensure HSE incidents on customer sites are investigated and communicated and lead serious incident investigations. Contribute to developing Valmet project and site HSE management and social responsibility process and practices. Any other relevant tasks assigned by the manager. To succeed this role, you will need: Knowledge and skills: Technical competence in customer site HSE management practices including risk identification and mitigation especially in EPC projects. Incident investigation skills. Knowledge of multi-site ISO 14001, 45001 and 9001 management system standards, as well as internal auditing skills. Excellent verbal and written communication skills in English. Other languages are merited. Working knowledge of Microsoft Office-Suite, Power BI, M-Files, Sharepoint and Teams. Behaviors: HSE role model with integrity and a strong moral compass. Communicates transparently with clarity and authority. Influences and negotiates to find solutions and achieve results. Builds strong networks and engagement towards priorities. Decision making skills, right decisions on time Experience & education: Graduate in Mechanical Engineer or Occupational safety diploma with minimum 5-7 years experience Several years’ experience in muti-cultural customer project and site HSE work. We offer: We offer you a rewarding position in a global industry, leader in pulp, paper and energy industries with the possibility to grow professionally. If this sounds like something you are looking for and you are ready to go forward on your career, send your application with your CV via the link provided latest by 15 Sep 2025 . When everything works together, Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in serving our customers. Our more than 19,000 professionals work close to our customers and are committed to improving our customers’ performance – every day. The company has over 220 years of industrial history and a strong track record in continuous improvement and renewal. Valmet’s net sales in 2024 were approximately EUR 5.1 billion. Valmet’s shares are listed on the Nasdaq Helsinki and the head office is in Espoo, Finland. Join the team! www.valmet.com/careers
Engineer Specialist, Pressure Parts for Pulp and Energy Business Line (based in Chennai, India) Are you the enthusiastic, self-driven and result-oriented professional who wants to move our customer’s performance forward? We are looking for “Engineer Specialist, Pressure Parts” to be based in Chennai, India. This position reports to “Manager, Engineering, India”. In this position you will have an opportunity to prepare detail design drawings for pressure parts, equipment & structures (for example Furnace panels, superheater elements, equipment or structures) from engineering specifications. In this position, you will be required to, Prepare detail drawings and 3D Model through Engineering tools (e.g., AutoCAD, SW & E3D) Understand/study the inputs clearly before start detail design. Understand the applicable codes and standards (ASME, EN & IBR) Follow & ensure all points in guidelines list before handing over check prints to lead engineer Double check the detail drawings before handing over to lead engineer. Maintenance of check prints and COPQ man hours Time Schedule and quality of deliverables need to be achieved. Uploading drawings into M-file, (if required) To succeed this role, you will need: Bachelor’s degree in mechanical engineering. Min.10 years of experience in relevant field. Knowledge of Codes & Standards, E3D, Solid work and AutoCAD. Minimum 5 years of exp. Solid works / E3D design tool (Currently working with SW/E3D) Boiler internal piping Layout and Detail engineering with minimum 5 years exp. Detail engineering knowledge of Pressure parts & support structures engineering Effective written and oral communication skills in English. We offer: We offer you a rewarding position in a global industry, leader in pulp, paper and energy industries with the possibility to grow professionally. If this sounds like something you are looking for and you are ready to go forward on your career, send your application with your CV via the link provided latest by 15 September 2025. When everything works together, Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in serving our customers. Our more than 19,000 professionals work close to our customers and are committed to improving our customers’ performance – every day. The company has over 220 years of industrial history and a strong track record in continuous improvement and renewal. Valmet’s net sales in 2024 were approximately EUR 5.1 billion. Valmet’s shares are listed on the Nasdaq Helsinki and the head office is in Espoo, Finland. Join the team! www.valmet.com/careers
Engineer Specialist, CSA for Pulp and Energy Business Line (based in Chennai, India) Are you the enthusiastic, self-driven and result-oriented professional who wants to move our customer’s performance forward? We are looking for “Engineer Specialist, CSA” to be based in Chennai, India. This position reports to “Manager, CSA Engineering, India”. In this position you will have an opportunity to carry out Design and Detailing of Boiler, Evaporator, Pipe Rack and Auxiliary Structures using STAAD. Sound knowledge in the Steel Structural Design concepts and in the connection design are essential. In this position, you will be required to: Execute the engineering for Steel Structures including Steel layout, Design and Detail Engineering and associated engineering calculations. Carryout the Structural Design using Stadd Modelling for Boiler, Evaporator, Pipe Rack and Auxiliary Structures Structures according to various countries design codes. Execute the detail Engineering of the above said structures Coordinate with inter disciplines of the organization based on the project requirement Deliver the Outputs on schedule with Quality Managing and development of the reporting engineers/Designers Participating and conducting the Meetings based on the work requirement Follow the organizational procedures and practices during the execution To succeed this role, you will need: Bachelor / Master’s Degree in Civil / Structural engineering. 6-15 years of experience in relevant field. Knowledge of Indian and International Design Codes & Standards Sound Knowledge in the Steel Structural Design Concepts and connection Design Rich Experience in Stadd Experience in Tekla, Auto CAD (additional values) Good written and oral communication skills in English. We offer: We offer you a rewarding position in a global industry leader in pulp, paper and energy industries with the possibilities to grow professionally. If this sounds like something you are looking for and you are ready to go forward on your career, send your application with your CV via the link provided latest by 15 Apr 2025 When everything works together, Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in serving our customers. Our more than 19,000 professionals work close to our customers and are committed to improving our customers’ performance – every day. The company has over 220 years of industrial history and a strong track record in continuous improvement and renewal. Valmet’s net sales in 2022 were approximately EUR 5.1 billion. Valmet’s shares are listed on the Nasdaq Helsinki and the head office is in Espoo, Finland. Join the team! www.valmet.com/careers
Assistant Engineers for Pulp, Energy circularity in Services engineering (based in Chennai, India) Are you an enthusiastic, self-driven and result-oriented professional who wants to improve our customer’s performance forward? We are looking for “ Assistant Engineer ” to be based in Chennai, India. You have an opportunity to be part of the team that delivers projects & services globally to pulp and energy industry. You will be handling Global services cases of Boiler Retrofit/ Upgrade projects and time to time provide support to global projects coming from HQ based in Finland / Sweden. The successful candidate is expected to perform the following tasks; Capable of performing complete basic and detailed engineering for air pollution control equipment and other systems like Wood Handling and ESP retrofit/upgrade projects. Provide necessary support to sales team on estimation, preliminary drawing preparation and queries during sales phase. Prepare drawings and 3D Model and other engineering documentation with the help of engineering tools (e.g., AutoCAD, SolidWorks / E3D). Understand/study the documentation inputs clearly and raise any discrepancies/ variations before beginning the design work. Follow the Time Schedule and quality of deliverables need to be achieved. The ideal candidate is expected to hold the following. Bachelor / Master’s Degree in Mechanical engineering. 3-5 years of experience in Air pollution equipment's engineering. Working knowledge in engineering tools such as AutoCAD, Solid Works & E3D is a prerequisite for this position. Effective written and oral communication skills in English. Willingness to travel to client sites >25% of time is required for this position. We offer: We offer you a rewarding position in a global industry leader in pulp and energy industries with the possibilities to grow professionally. If this sounds like something you are looking for and you are ready to go forward in your career, send your application with your CV via the link provided latest by 20th September 2025 When everything works together Valmet is where the best talent from a wide variety of backgrounds comes together. With 19,000 professionals around the world, we are the leading global developer and supplier of technologies, automation and services for the pulp, paper and energy industries, and serve an even wider base of process industries with our automation systems and flow control solutions. Our commitment to moving our customers’ performance forward requires creativity, technological innovations, service know-how – and above all, teamwork. Join the team! www.valmet.com/careers
Engineer for Pulp, Energy circularity in Services engineering (based in Chennai, India) Are you an enthusiastic, self-driven and result-oriented professional who wants to improve our customer’s performance forward? We are looking for “ Engineer ” to be based in Chennai, India. You have an opportunity to be part of the team that delivers projects & services globally to pulp and energy industry. You will be handling Global services cases of Boiler Retrofit / Upgrade projects and time to time provide support to global projects coming from HQ based in Finland / Sweden. The successful candidate is expected to perform the following tasks; Diploma / bachelor’s degree in mechanical engineering. 5-8 years of relevant experience, preferably in the pulp and Energy industry. Design, develop, and document mechanical systems and components for Valmet’s products, particularly in the pulp, paper, and energy sectors. Create and manage 3D models and detailed engineering drawings. Ensure designs meet performance, quality, and safety standards. Participate in design reviews and support product lifecycle from concept to commissioning. Maintain documentation in line with engineering schedules and budgets. Provide necessary support to sales team on estimation, preliminary drawing preparation and queries during sales phase. Working knowledge in engineering tools such as AutoCAD, Solid Works and E3D is a prerequisite for this position. Understand/study the documentation inputs clearly and raise any discrepancies/ variations before beginning the design work. Follow up and expedite the work process from the start to end and liaise with all the departments for timely completion and smooth workflow. Review all the in-house drawings and sub-contractor documentation and make sure the right/ accurate/ latest drawings go to fabrication. we have close cooperation with colleagues and customers in different places in the world, it is important that you have good knowledge of English Willingness to travel to client sites >25% of time is required for this position. We offer: We offer you a rewarding position in a global industry leader in pulp and energy industries with the possibilities to grow professionally. If this sounds like something you are looking for and you are ready to go forward in your career, send your application with your CV via the link provided latest by 20th September 2025 When everything works together Valmet is where the best talent from a wide variety of backgrounds comes together. With 19000 professionals around the world, we are the leading global developer and supplier of technologies, automation and services for the pulp, paper and energy industries, and serve an even wider base of process industries with our automation systems and flow control solutions. Our commitment to moving our customers’ performance forward requires creativity, technological innovations, service know-how – and above all, teamwork. Join the team! www.valmet.com/careers
Category Manager for GS PROC Category Management (based in Pune or Chennai , India) Are you the enthusiastic, self-driven and result-oriented professional who wants to move our customers’ performance forward? We are looking for “GS PROC Category Management” to be based in Pune, India. This position reports to “ Manager, Category Management , GS PROC Category Management”. In this position you will have the opportunity to (1) lead the assigned category within Global Supply, (2) develop and maintain category strategies with the company's overall business objectives in close collaboration with the Business Areas, (3) build and lead cross-functional category teams and (4) collaborate with key stakeholders to ensure cost-effective supply base of products and services though optimal supplier performance. In this position, you will be required to, Strategic Category Management Develops and executes category strategies together with BA stakeholders in alignment with growth targets keeping enhanced focus on Cost Competitive Countries Sourcing (CCC) Leads a matrix category team with a balanced mix of commercial, technical, and regional expertise. Conducts supplier, industry, and market research to inform sourcing strategies and decisions. Collaborates with internal stakeholders to identify category needs and opportunities. Supplier Development & Management Ensures supplier base capable to develop quality, delivery, cost (QDC) as well as capacity and demand challenges for category Manages Partner and Key suppliers, acting as the main commercial contact. Promotes design-to-cost initiatives and supplier-led innovation. Shares supplier and cost information transparently across functions. Builds strong stakeholder support for category initiatives and sourcing strategies Category Management Excellence Conducts competitive tenders and negotiations to achieve cost savings and favorable contractual terms with the leverage of group purchasing volumes, and focus on world-wide supplier base and Cost Competitive Countries Sourcing (CCC) Active collaboration with sourcing teams for category strategy execution and ensure contract compliance. Ensures quality of Category Management master data in all relevant systems and environments to support accurate reporting and development of category KPIs. Risk Management & Compliance Identifies and mitigate supply chain risks proactively. Ensures compliance with sourcing policies, approval processes, and ISO standards Maintains accurate supplier and item data and improve category KPIs. Leadership & Continuous Improvement Drives continuous improvement in sourcing processes and tools To succeed in this role, you will need: Bachelor’s or Master’s Degree in Engineering, Economics or related field. Min. 7 years of experience in Procurement or in relevant fields of engineering / product management Strong analytical skills, strategic acumen and cost rationalization mindset with the ability to interpret data and make data-driven decisions to drive cost-efficient procurement activities.Strong interpersonal skills including knowledge in managing matrix teams and stakeholders with geographically and culturally diverse setup. Effective communication and collaboration skills Results-oriented strategic mindset and high accountabilityExperience/Expertise in Castings & Forging and/or similar production methods is a strong asset. English language, written and spoken, is mandatory Willingness for travelling We offer: A rewarding position in a global industry leader in pulp, paper and energy industries with the possibilities to grow professionally. If this sounds like something you are looking for and you are ready to go forward on your career, send your application with your CV via the link provided latest by 30th Sep 2025. Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in serving our customers. The company has over 220 years of industrial history and a strong track record in continuous improvement and renewal. Valmet’s net sales in 2023 were approximately EUR 5.1 billion. Valmet’s shares are listed on the Nasdaq Helsinki and the head office is in Espoo, Finland. At Valmet, we enhance circularity and environmental efficiency and reduce CO2 emissions through the entire value chain. Valmet aims to enable fully carbon neutral production for its customers by 2030. Join the team! www.valmet.com/careers
Manufacture the organization's products according to production specifications and schedules; volume, cost, and wastage targets; and quality standards. 1. Operate machines and production equipment safely and in accordance with instructions. 2. Load materials into production machines in a timely and efficient manner. 3. Remove, pack, and sort raw materials or finished products. 4. Collect, and dispose of garbage and production waste according to the organization's waste removal and recycling policies. 5. Clean production equipment and work areas to ensure adherence to health and safety requirements. Work complexity and business impact: Works under moderate supervision. Problems are typically of a routine nature, but may at times require interpretation or deviation from standard procedures. Communicates information that requires some explanation or interpretation. Geographical scope: local Typical minimum relevant experience required: 1-3 years. Requires basic knowledge of job procedures and tools obtained through work experience.