Hi, Sweco India is looking for a enthusiastic Project Controller for our Gurgaon/Bangalore office. Interested candidate may send their application to career@swecogroup.in please mention in subject line "application for Project controller". Responsibilities Experience of working in Project Portfolio Management i.e., Monitor/control overall performance of departmental Project KPIs. Assist Regional/Project Managers in making informed decisions by identifying project risks, ensuring alignment with revenue and profit goals. Supporting Field Managers to Track their Equipment KPI i.e. Revenue, Cost, profits etc., Take actions for smooth BAU. Create WBS, plan project activities, forecast and load resource in project plans. Monitor progress by analysing project schedules against project baselines and take corrective actions. Prepare and deliver monthly project reports providing insights on forecasting (prognosis) for multiple disciplines, comparing budget vs. actual costs and time, follow-up on ETC. Calculate project margin, assess risks based on KPI readings & check deviations. Perform financial administration in Deltek Maconomy (ERP) and handle project invoicing based on resources, materials etc. Time reporting for multiple subconsultants. Automating routing tasks using VBA/ power query. Qualifications MBA in Construction Management or Infrastructure Management or Project Management B.Tech in Civil/ Mechanical Required Skills Financial Management Invoicing and Budgeting Cost control and Project Control, EVM Risk Management Interactive Dashboards Coordinating International projects Analytical and communication skills Preferred Skills Good knowledge for the following software is important for the role: Power BI Advance Excel MS project/ Primavera Any ERP software knowledge, i.e. SAP, Maconomy, Ecosys etc. Experience 3 - 6 Years Show more Show less
Position- HVAC Engineer ROLE SUMMARY We are looking for Mechanical/HVAC Engineers with professional experience from similar industry to join our team in Gurgaon & work mainly in international projects preference to Swedish projects. WORK TASKS & RESPONSIBILITIES To work in close collaboration with skilled designers to create an optimal HVAC design including the preparation of basic design, calculations, details, specification within heating, ventilation, air conditioning, duct sizing/routing, chilled beam system Select equipment and prepare equipment and layouts accordingly Prepare calculations on said design, ensuring compliance with applicable standards You will be requested to think critically about solutions and designs You will be given the responsibility to ensure quality on your projects Evaluating design drawings, data, proposals, specifications and calculations for mechanical systems to satisfy target requirements throughout the design process and contribute to content and direction. Detail design of the system by preparing a 3D model and coordinating among the services for a clash free system. You will be expected to involve in researching, planning, designing and developing sustainable mechanical systems To work in both supervised and unsupervised environments ensuring that the technical content of all work carried out is correct and carried out in accordance within agreed timescales and within agreed budgets You will work in close collaboration with our Swedish colleagues overcoming obstacles and making elegant designs PROFESSIONAL QUALIFICATIONS AND EXPERIENCE REQUIRED A Graduate HVAC Engineer and have suitable experience working. Conversant with codes and standards Strong interpersonal / team working skills Consultancy environment experience Good knowledge of AutoCAD or MagiCAD and Revit. Significant previous experience of the preparation of schematic and layout drawings including supporting engineering calculations. Experience of working in 2-D and 3-D environment. Ability to communicate in a fluent and positive manner with other team members and to produce reports in plain English A big plus would be: Good experience of software’s like Revit, MagiCAD for AutoCAD, Solibri, Navisworks, Bluebeam, HAP and Cadium. Been working with Swedish design of HVAC systems such as ventilation, cooling, heating load calculation, AHU Sizing, HVAC Duct Sizing, Heat Load calculation, air flow calculation. Experience of 3-D coordination Knowledge of Swedish standards and regulations BIM360 PERSONAL COMPETENCIES NEEDED Tech savvy and aptitude for learning on the job Strong command of the English language Ability to work in Team environment and independently within a project team Self-critical and attention to detail Reliable and hardworking Sweco As workplace At Sweco, we offer exciting careers and emphasize personal development, accountability and independence in everything we do. We maintain a great social environment and provide many opportunities to influence your own development through targeted training, coaching and knowledge sharing. About Sweco: Sweco is the leading Engineering Consulting organization in Europe with Head Office in Stockholm, Sweden. We have around 22000 employees spread across in Sweden, Norway, Denmark, Germany, Netherlands, Belgium, UK, and many other European countries. Sweco has projects currently underway in some 70 Countries worldwide and has a net sales turnover of nearly € 2 Billion. Sweco is a multidisciplinary Engineering Consulting organization. Our service ranges from Architecture, City Master Planning, Smart City, Infrastructure, etc. and our scope of work ranges from feasibility study, concept design, detailed design and project management. Sweco India is a part of Sweco group and serves as engineering design centre for the Sweco group companies. We are not involved in projects in India. All our projects are from different Sweco companies in Europe. For more information, you may visit our official website: www.swecogroup.com to know more about us. Note:- Interested candidates can share their updated CV at career@swecogroup.in/nitesh.sharma@swecogroup.in Show more Show less
Role & responsibilities Mechanical Engineering, working in a Multidisciplinary Team, interfacing and coordinating with the other disciplines Water / Wastewater Treatment Design Providing Outline and Detailed Mechanical Design Deliverables, including; - Pumping Systems Design, Hydraulic calculations and Pump Selection - Pumping Station Design - General Arrangements - Piping and Fittings Design - Access and Lifting for Water / Wastewater Treatment Process Plant - Plant and Equipment Selection for Water / Wastewater Treatment Process - Developing P&IDs in conjunction with other design disciplines Participation in Design Review, Hazard Studies and Access Lifting and Maintenance Review Ensuring design output is completed in accordance with the agreed scope of works, timescales and budgets. Preferred candidate profile Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of design in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT or Plant 3D as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors
The Geospatial Expert position within the Digital Services & Solutions (DSS) Team at Sweco is located in Gurgaon and requires 5-10 years of experience. In this role, you will be involved in various projects including LiDAR Point Cloud Classification, Mobile Mapping Data Extraction, Drone Photogrammetry & Orthomosaic Generation, Topographic Mapping, 3D City Modelling, Infrastructure Mapping, Building Facade Extraction, Digital Elevation Models Creation, Power Line Mapping, Feature Digitization, and Asset Inventory. To be considered for this position, you should have a B.Tech degree in Geoinformatics or Civil Engineering and possess a strong command over TerraSolid Suite (TerraScan, TerraMatch, TerraModeler), MicroStation Connect Edition, and ContextCapture. Additionally, excellent English communication skills, both written and verbal, are required along with 5-8 years of relevant hands-on industry experience. If you are someone who is passionate about utilizing geospatial data for real-world solutions and enjoys working with cutting-edge technologies such as LiDAR, Mobile Mapping, and Drone Photogrammetry, this role is for you. Joining Sweco means collaborating with experts from Europe and contributing to projects that have a meaningful global impact. If you are interested in this opportunity, please send your CV to career@swecogroup.in. Feel free to tag someone you know who would be a perfect fit for this role and let's work together to shape a sustainable future at Sweco.,
Hi Everyone, We are looking for Tekla Steel Modeller & Detailer with experience in modelling, generation of Erection and shop drawing. The candidate will be working closely with various international clients on Industrial and Commercial projects. Job Location: Gurugram (on-site) Experience: 3-8 years Duties and Responsibilities: 1. Study and understand all the Structural drawings/ reference models/ contractual documents to learn the project scope of work and requirements. 2. Study and understand Architectural and MEP drawings/models. 3. Create 3D steel models coordinating with multiple disciplines. 4. Preparation of structural 2D Erection and Shop drawing using Tekla Structures. 5. Interpret and incorporate approval comments, design changes, and other revisions into the scope of the project. 6. Handle multiple projects. 7. Preparation of RFI’s related to projects. Skills/experience required: 1. Diploma / B. Tech. in Civil Engineering with a minimum of 3 years of professional experience. 2. Basic knowledge of Auto CAD is sound. Good knowledge of Tekla is a must. 3. Experience in working on the international project. Finnish experience is an added advantage. 4.Hand on experience in Idea statiCA is an add on advantage. 5. High achiever, with a desire for personal and professional growth. 6. Strong analytical skills. FEM competence is considered as a benefit. 7. Good and clear English communication.
Hi Everyone, We are looking for Tekla Steel Modeller & Detailer with experience in modelling, generation of Erection and shop drawing. The candidate will be working closely with various international clients on Industrial and Commercial projects. Job Location: Gurugram (on-site) Experience: 3-8 years Duties and Responsibilities: 1. Study and understand all the Structural drawings/ reference models/ contractual documents to learn the project scope of work and requirements. 2. Study and understand Architectural and MEP drawings/models. 3. Create 3D steel models coordinating with multiple disciplines. 4. Preparation of structural 2D Erection and Shop drawing using Tekla Structures. 5. Interpret and incorporate approval comments, design changes, and other revisions into the scope of the project. 6. Handle multiple projects. 7. Preparation of RFIs related to projects. Skills/experience required: 1. Diploma / B. Tech. in Civil Engineering with a minimum of 3 years of professional experience. 2. Basic knowledge of Auto CAD is sound. Good knowledge of Tekla is a must. 3. Experience in working on the international project. Finnish experience is an added advantage. 4.Hand on experience in Idea statiCA is an add on advantage. 5. High achiever, with a desire for personal and professional growth. 6. Strong analytical skills. FEM competence is considered as a benefit. 7. Good and clear English communication. Show more Show less
We are looking for a Mechanical Engineer to provide technical mechanical engineering support, ensuring that projects are delivered to high standards and within agreed timelines. Your Purpose As a Mechanical Engineer, you’ll play a key role in the design and delivery of mechanical systems, collaborating with multidisciplinary teams to ensure project success. You’ll focus on developing innovative solutions for water and wastewater treatment processes, while maintaining a commitment to health, safety, and operational excellence. What You’ll Be Doing Design mechanical and hydraulic systems for water treatment plant processes, ensuring compliance with statutory and company standards. Lead the design of pumping systems, including pump calculations, pump selection, and pipework design. Design mechanical building services and integrate package plants (e.g., screens, filters, chemical dosing systems). Develop and integrate bespoke solutions within existing treatment processes. Design mechanical equipment for hazardous areas, ensuring DSEAR compliance. Contribute to the development of standard products and industrialized package solutions. Implement AW Engineering standards and ensure designs align with project outcomes. Ensure all designs meet project timescales, budget, and quality standards, escalating issues when necessary. Balance capital and maintenance expenditure to optimize project value. Foster a collaborative environment by working closely with internal teams and external stakeholders. Ensure mechanical designs meet the “safe to operate” requirements, prioritizing health and safety compliance. Provide technical expertise and safety advice to design teams, contractors, and others to ensure successful project outcomes. Comply with all relevant mechanical standards, including LOLER, PUWER, PSSR2000, and CDM. Qualifications and Experience Required Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of design in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT or Plant 3D as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Principal Duties and Main Activities See also AW@One Role Profile Key points: A minimum of HND (or equivalent) in Mechanical Engineering. Extensive experience in mechanical design, particularly in hydraulic and mechanical systems. A strong understanding of modular build and construction processes. Proven ability to design and deliver innovative mechanical solutions for water sector projects. Knowledge of electrical control, instrumentation, and switchgear systems. Excellent collaboration skills, with the ability to work effectively with multidisciplinary teams. A proactive approach to continuous improvement and problem-solving.
We’re looking for a Process Engineer to join our team offshore, helping lead the way in innovative and sustainable water infrastructure engineering. Your Purpose As a Process Engineer, you will provide technical direction and guidance to process engineers, ensuring the effective and efficient delivery of process design for water infrastructure projects. You’ll be responsible for reviewing and ensuring that process design deliverables meet required standards, specifications, and project outcomes. This role provides the opportunity to work remotely while leading a team to shape the future of water infrastructure through sustainable, innovative design. What You’ll Be Doing Lead process design delivery for water infrastructure projects, ensuring compliance with safety, technical, and quality standards. Review process design deliverables, including mass balances, hydraulic calculations, P&IDs, and process flow diagrams, ensuring technical accuracy. Collaborate with multidisciplinary teams to ensure timely design reviews and adjustments. Mentor and develop junior process engineers, fostering professional growth and the adoption of best practices. Ensure designs comply with relevant health, safety, and environmental standards, including hazardous area compliance (DSEAR). Contribute to continuous improvement, driving innovation in design and digital technologies. Support stakeholder management and supplier coordination to ensure design acceptance and successful project delivery. Champion sustainability and carbon reduction in design practices to enhance natural capital. Qualifications and Experience Required Minimum B. Tech / M. Tech in Environmental/Chemical Engineering from an institution of repute. Extensive knowledge and experience of design in the water and municipal wastewater industry. Including Biological Treatment processes. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in MS Office Software including Excel. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Principal Duties and Main Activities See also AW@One Role Profile Key points: A degree in Chemical, Mechanical, or Process Engineering (or equivalent experience). Ideally chartered or working towards chartered status. Strong experience in the water sector, particularly in process design and capital projects. In-depth knowledge of process design standards, regulations, and environmental requirements. Proven ability to mentor and develop junior engineers. Experience in a Design & Build environment is beneficial, but not essential. Familiarity with health, safety, and environmental management in water infrastructure projects. Strong leadership, communication, and decision-making skills, with a focus on collaboration and continuous improvement. A commitment to sustainability and reducing the environmental impact of engineering solutions. A proactive approach to learning and development, with a keen interest in embracing new technologies and improving efficiency. A commitment to safety, ensuring all designs comply with CDM regulations and health and safety practices.
We are looking for an Electrical Engineer to provide technical mechanical engineering support, ensuring that projects are delivered to high standards and within agreed timelines. Your Purpose As an Electrical Engineer, you will be responsible for delivering electrical engineering designs, managing technical documents, and ensuring compliance with safety and quality standards. This role offers a dynamic and challenging environment where you’ll apply your expertise to water and wastewater projects, focusing on control systems, electrical installations, and power supply design. What You’ll Be Doing Produce technical deliverables including schedules, data sheets, engineering calculations, and specifications for subcontracts. Design electrical systems for water and wastewater treatment plants, including control, monitoring, and telemetry systems. Develop electrical installation designs, ensuring compliance with safety standards, including for hazardous areas. Support the development of incoming electrical supply systems, ensuring reliability and efficiency. Collaborate with the supply chain and provide technical bid analysis for their designs. Ensure all work meets technical standards, adhering to the MAS requirements and challenging when necessary. Drive excellence in health and safety by applying CDM regulations and creating safe designs. Maintain quality and consistency in all engineering technical documents and deliverables. Work closely with senior engineers and discipline heads to ensure thorough checking and approval of technical deliverables. Communicate effectively across teams to ensure technical excellence and escalate any potential issues to the Technical Manager. Collaborate with engineers and technical managers to ensure smooth project interfaces and share best practices. Qualifications and Experience Required Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of design in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT or Plant 3D as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Principal Duties and Main Activities See also AW@One Role Profile Key points: A degree or higher technical qualification in Electrical Engineering or a relevant discipline. Solid experience in a project engineering environment, with a strong understanding of electrical design and project delivery. A proven ability to design and administer electrical projects, particularly for water sector assets. Excellent knowledge of electrical systems for water and wastewater treatment, including instrumentation and power supply design. Strong communication and collaboration skills, with the ability to liaise effectively with internal and external stakeholders. Excellent problem-solving skills and the ability to apply practical experience to complex challenges. Experience in applying CDM regulations and ensuring safety standards are adhered to in designs. A proactive approach to learning and development, with a keen interest in embracing new technologies and improving efficiency. A commitment to safety, ensuring all designs comply with CDM regulations and health and safety practices.
We're looking for a Process Engineer to join our team offshore, helping lead the way in innovative and sustainable water infrastructure engineering. Your Purpose As a Process Engineer, you will provide technical direction and guidance to process engineers, ensuring the effective and efficient delivery of process design for water infrastructure projects. You'll be responsible for reviewing and ensuring that process design deliverables meet required standards, specifications, and project outcomes. This role provides the opportunity to work remotely while leading a team to shape the future of water infrastructure through sustainable, innovative design. What You'll Be Doing Lead process design delivery for water infrastructure projects, ensuring compliance with safety, technical, and quality standards. Review process design deliverables, including mass balances, hydraulic calculations, P&IDs, and process flow diagrams, ensuring technical accuracy. Collaborate with multidisciplinary teams to ensure timely design reviews and adjustments. Mentor and develop junior process engineers, fostering professional growth and the adoption of best practices. Ensure designs comply with relevant health, safety, and environmental standards, including hazardous area compliance (DSEAR). Contribute to continuous improvement, driving innovation in design and digital technologies. Support stakeholder management and supplier coordination to ensure design acceptance and successful project delivery. Champion sustainability and carbon reduction in design practices to enhance natural capital. Qualifications and Experience Required Minimum B. Tech / M. Tech in Environmental/Chemical Engineering from an institution of repute. Extensive knowledge and experience of design in the water and municipal wastewater industry. Including Biological Treatment processes. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in MS Office Software including Excel. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Principal Duties and Main Activities See also AW@One Role Profile Key points: A degree in Chemical, Mechanical, or Process Engineering (or equivalent experience). Ideally chartered or working towards chartered status. Strong experience in the water sector, particularly in process design and capital projects. In-depth knowledge of process design standards, regulations, and environmental requirements. Proven ability to mentor and develop junior engineers. Experience in a Design & Build environment is beneficial, but not essential. Familiarity with health, safety, and environmental management in water infrastructure projects. Strong leadership, communication, and decision-making skills, with a focus on collaboration and continuous improvement. A commitment to sustainability and reducing the environmental impact of engineering solutions. A proactive approach to learning and development, with a keen interest in embracing new technologies and improving efficiency. A commitment to safety, ensuring all designs comply with CDM regulations and health and safety practices.
We are looking for an Electrical Engineer to provide technical mechanical engineering support, ensuring that projects are delivered to high standards and within agreed timelines. Your Purpose As an Electrical Engineer, you will be responsible for delivering electrical engineering designs, managing technical documents, and ensuring compliance with safety and quality standards. This role offers a dynamic and challenging environment where you'll apply your expertise to water and wastewater projects, focusing on control systems, electrical installations, and power supply design. What You'll Be Doing Produce technical deliverables including schedules, data sheets, engineering calculations, and specifications for subcontracts. Design electrical systems for water and wastewater treatment plants, including control, monitoring, and telemetry systems. Develop electrical installation designs, ensuring compliance with safety standards, including for hazardous areas. Support the development of incoming electrical supply systems, ensuring reliability and efficiency. Collaborate with the supply chain and provide technical bid analysis for their designs. Ensure all work meets technical standards, adhering to the MAS requirements and challenging when necessary. Drive excellence in health and safety by applying CDM regulations and creating safe designs. Maintain quality and consistency in all engineering technical documents and deliverables. Work closely with senior engineers and discipline heads to ensure thorough checking and approval of technical deliverables. Communicate effectively across teams to ensure technical excellence and escalate any potential issues to the Technical Manager. Collaborate with engineers and technical managers to ensure smooth project interfaces and share best practices. Qualifications and Experience Required Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of design in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT or Plant 3D as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Principal Duties and Main Activities See also AW@One Role Profile Key points: A degree or higher technical qualification in Electrical Engineering or a relevant discipline. Solid experience in a project engineering environment, with a strong understanding of electrical design and project delivery. A proven ability to design and administer electrical projects, particularly for water sector assets. Excellent knowledge of electrical systems for water and wastewater treatment, including instrumentation and power supply design. Strong communication and collaboration skills, with the ability to liaise effectively with internal and external stakeholders. Excellent problem-solving skills and the ability to apply practical experience to complex challenges. Experience in applying CDM regulations and ensuring safety standards are adhered to in designs. A proactive approach to learning and development, with a keen interest in embracing new technologies and improving efficiency. A commitment to safety, ensuring all designs comply with CDM regulations and health and safety practices.
Company Description Sweco is at the forefront of the green transition, planning and designing the sustainable communities and cities of the future. With the collective knowledge of 22,000 architects, engineers, and other specialists, we co-create solutions with our clients to tackle urbanisation, harness the power of digitalisation, and promote sustainability in our societies. Sweco is Europe's leading engineering and architecture consultancy, with sales of approximately SEK 29 billion (EUR 2.5 billion). The company is listed on Nasdaq Stockholm. Role Description This is a full-time on-site role for a Senior Process Engineer based in Bengaluru South. The Senior Process Engineer will be responsible for designing and optimizing processes, developing process simulations, conducting risk assessments, and ensuring compliance with industry standards. Daily tasks may include evaluating systems and processes to ensure efficiency, troubleshooting issues, and collaborating with other engineers and specialists to implement solutions. The Senior Process Engineer will also be expected to lead and mentor junior engineers. Qualifications Strong experience in process design and optimization Proficiency in developing process simulations and conducting risk assessments In-depth knowledge of industry standards and compliance requirements Excellent problem-solving skills and attention to detail Ability to work collaboratively with a team and lead projects Strong communication and interpersonal skills Relevant experience in the engineering sector Bachelor's or Master's degree in Chemical Engineering, Process Engineering, or a related field Experience in green transition and sustainability projects is a plus
🚨 We're Hiring! I'm excited to share that we're looking for motivated Landscape Architect to join our team at Sweco India! If you're passionate and carrying below skillset or know someone who might be a great fit? Please feel free to tag or share! Job location- Gurugram Education- Bachelors or Masters degree in Landscape architecture or Civil engineering •Minimum 2 years of experience, the more experience the beƩer •Must master the Civil 3D software •Speaks and writes fluently in English. •Education in land planning or similar to be able to work in 3D. •Proficient in GIS (for making maps) •Proficient in Adobe programs as Illustrator, Photoshop, InDesign •Previous experience with infrastructure, specifically rail. •Competence in using the ProjectWise tool •Previous experience working in projects in Sweden.
We are looking for a Mechanical Engineer to provide technical mechanical engineering support, ensuring that projects are delivered to high standards and within agreed timelines. Your Purpose As a Mechanical Engineer, you'll play a key role in the design and delivery of mechanical systems, collaborating with multidisciplinary teams to ensure project success. You'll focus on developing innovative solutions for water and wastewater treatment processes, while maintaining a commitment to health, safety, and operational excellence. What You'll Be Doing Design mechanical and hydraulic systems for water treatment plant processes, ensuring compliance with statutory and company standards. Lead the design of pumping systems, including pump calculations, pump selection, and pipework design. Design mechanical building services and integrate package plants (e.g., screens, filters, chemical dosing systems). Develop and integrate bespoke solutions within existing treatment processes. Design mechanical equipment for hazardous areas, ensuring DSEAR compliance. Contribute to the development of standard products and industrialized package solutions. Implement AW Engineering standards and ensure designs align with project outcomes. Ensure all designs meet project timescales, budget, and quality standards, escalating issues when necessary. Balance capital and maintenance expenditure to optimize project value. Foster a collaborative environment by working closely with internal teams and external stakeholders. Ensure mechanical designs meet the safe to operate requirements, prioritizing health and safety compliance. Provide technical expertise and safety advice to design teams, contractors, and others to ensure successful project outcomes. Comply with all relevant mechanical standards, including LOLER, PUWER, PSSR2000, and CDM. Qualifications and Experience Required Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of design in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT or Plant 3D as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Principal Duties and Main Activities See also AW@One Role Profile Key points: A minimum of HND (or equivalent) in Mechanical Engineering. Extensive experience in mechanical design, particularly in hydraulic and mechanical systems. A strong understanding of modular build and construction processes. Proven ability to design and deliver innovative mechanical solutions for water sector projects. Knowledge of electrical control, instrumentation, and switchgear systems. Excellent collaboration skills, with the ability to work effectively with multidisciplinary teams. A proactive approach to continuous improvement and problem-solving.
As an HVAC Engineer at Sweco, you will play a crucial role in creating optimal HVAC designs for international projects, with a focus on Swedish projects. Your responsibilities will include: - Collaborating closely with skilled designers to develop HVAC designs, including basic design preparation, calculations, details, and specifications within heating, ventilation, air conditioning, duct sizing/routing, and chilled beam systems. - Selecting equipment and preparing layouts accordingly, ensuring compliance with applicable standards. - Thinking critically about solutions and designs, and ensuring quality on your projects. - Evaluating design drawings, data, proposals, specifications, and calculations for mechanical systems to meet target requirements. - Detailing the system by preparing a 3D model and coordinating among services for clash-free systems. - Researching, planning, designing, and developing sustainable mechanical systems. - Working in supervised and unsupervised environments to ensure technical accuracy within agreed timescales and budgets. - Collaborating closely with Swedish colleagues to overcome obstacles and create elegant designs. Qualifications and Experience required for this role include: - Graduation in HVAC Engineering with relevant experience. - Familiarity with codes, standards, and consultancy environments. - Proficiency in AutoCAD, MagiCAD, and Revit, with experience in 2D and 3D environments. - Strong interpersonal and team-working skills, along with the ability to communicate effectively. - Experience with software like Revit, MagiCAD, Solibri, Navisworks, Bluebeam, HAP, and Cadium. - Knowledge of Swedish HVAC system design standards and regulations, BIM360, and 3D coordination. Personal competencies needed for this role are: - Tech-savvy with a willingness to learn on the job. - Strong command of the English language. - Ability to work both independently and in a team environment. - Self-critical with excellent attention to detail. - Reliable and hardworking.,
Your Purpose As a Civil Engineer, you will focus on the development of civil designs for non-infrastructure water assets. You’ll be responsible for ensuring the successful design and delivery of projects while contributing to the drive for sustainability, innovation, and efficiency. This offshore role offers a unique opportunity to be a key player in delivering complex water projects, improving water supply systems and infrastructure. What You’ll Be Doing Develop civil designs for water-sector assets, including concrete structures, steelwork, and masonry. Apply British Standards, Eurocodes, and relevant guidance to design pipes and structures. Produce clear and concise design sketches for integration into 3D models. Contribute to specifications, proposals, work scope, and project schedules. Participate in design development from feasibility studies to detailed designs. Prepare and review Design Risk Assessments, ensuring health and safety compliance in all stages of the design process. Support project management with preparation of Engineering Project Plans and liaising with stakeholders. Review technical designs with the Technical Manager before construction to ensure quality and accuracy. Engage with teams from various disciplines to optimise project delivery. Proactively suggest innovative processes and solutions to improve design efficiency and reduce carbon impact. Qualifications and Experience Required M Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of design in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT or Plant 3D as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Key points: A BEng or MEng/MSc degree in Civil or Structural Engineering. Working towards Chartered Engineer status (MICE or MIStructE). Strong experience in structural calculations for water industry assets and familiarity with design software (TEDDS, Staad Pro, Autodesk Robot). Competence in reinforced concrete design, steelwork specification, and understanding of masonry design. Experience in civil engineering design for water systems, including pipework, ground engineering, and service reservoir design. Good written and verbal communication skills, with an ability to collaborate across teams. Strong interest in learning, innovation, and continuous development. A solid understanding of health, safety, and welfare requirements in design. A proactive approach to learning and development, with a keen interest in embracing new technologies and improving efficiency. A commitment to safety, ensuring all designs comply with CDM regulations and health and safety practices.
Your Purpose As a Civil Engineer (Infrastructure), you will design and deliver water and wastewater infrastructure projects, focusing on applying engineering principles to provide practical, value-for-money solutions. You’ll collaborate with multidisciplinary teams to produce high-quality designs and ensure that all work meets safety, technical, and environmental standards. This role offers the opportunity to work remotely, leading projects from feasibility through to construction and providing expertise in pipeline and infrastructure design. What You’ll Be Doing Deliver clean water and wastewater infrastructure projects, applying engineering principles to produce innovative, cost-effective designs. Oversee the design and coordination of multidisciplinary teams to deliver pipeline designs, including pressure and gravity flow systems. Conduct design development from feasibility studies, optioneering, and detailed design through to final delivery. Prepare and review design documentation, including Impact and Commissioning plans, ensuring compliance with technical standards and specifications. Ensure designs are safe and in compliance with all relevant health, safety, and environmental regulations, including the preparation of Health and Safety Files. Assist in responding to technical queries and propose practical solutions to site challenges. Contribute to project delivery, managing sub-consultants, and ensuring designs are produced on time, within scope, and on budget. Participate in site surveys, risk assessments, and mitigation planning, ensuring designs align with site conditions. Work closely with internal and external stakeholders to ensure smooth project execution and foster collaborative relationships. Qualifications and Experience Required M Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of design in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT or Plant 3D as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Key points: A degree in Civil Engineering (or equivalent experience). Experience in the design of pipeline projects within the water and wastewater industry. Strong knowledge of pipeline construction techniques, materials, and their applications. Familiarity with computer-aided design and modelling tools. Experience in preparing design risk assessments and managing design quality. Excellent written and verbal communication skills, with the ability to collaborate effectively across multidisciplinary teams. A commitment to health, safety, and environmental compliance. An enthusiasm for continuous learning and applying innovative solutions in design. Experience in managing project design outputs and working within a Design & Build environment is advantageous. A proactive approach to learning and development, with a keen interest in embracing new technologies and improving efficiency. A commitment to safety, ensuring all designs comply with CDM regulations and health and safety practices.
Sr. BIM 3D Modeller - Job Description (India) The position is open at our India office working with our UK based teams. We have openings for Senior BIM 3D Modeller with a minimum of five (5) years of experience in Mechanical Engineering and Design. As a member of team, you will be responsible for carrying out the CAD Drawing development and 3D Modelling for UK Water projects. You will be working under the direction of the Team Manager, Project Managers and Lead Design Engineers. Qualifications and Experience Required Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of CAD Drawing development and 3D Modelling in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT, Civil 3D, Plant 3D, Navisworks as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Principal Duties and Main Activities BIM 3D Modeller, working in a Multidisciplinary Team, interfacing and coordinating with the other disciplines Water / Wastewater Treatment 3D Model Creation Providing Outline and Detailed 3D Design Models Developing P&IDs Participation in Design Review, Hazard Studies and Access Lifting and Maintenance Review Ensuring design output is completed in accordance with the agreed scope of works, timescales and budgets.
Your Purpose As a Civil Engineer, you will focus on the development of civil designs for non-infrastructure water assets. You'll be responsible for ensuring the successful design and delivery of projects while contributing to the drive for sustainability, innovation, and efficiency. This offshore role offers a unique opportunity to be a key player in delivering complex water projects, improving water supply systems and infrastructure. What You'll Be Doing Develop civil designs for water-sector assets, including concrete structures, steelwork, and masonry. Apply British Standards, Eurocodes, and relevant guidance to design pipes and structures. Produce clear and concise design sketches for integration into 3D models. Contribute to specifications, proposals, work scope, and project schedules. Participate in design development from feasibility studies to detailed designs. Prepare and review Design Risk Assessments, ensuring health and safety compliance in all stages of the design process. Support project management with preparation of Engineering Project Plans and liaising with stakeholders. Review technical designs with the Technical Manager before construction to ensure quality and accuracy. Engage with teams from various disciplines to optimise project delivery. Proactively suggest innovative processes and solutions to improve design efficiency and reduce carbon impact. Qualifications and Experience Required M Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of design in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT or Plant 3D as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Key points: A BEng or MEng/MSc degree in Civil or Structural Engineering. Working towards Chartered Engineer status (MICE or MIStructE). Strong experience in structural calculations for water industry assets and familiarity with design software (TEDDS, Staad Pro, Autodesk Robot). Competence in reinforced concrete design, steelwork specification, and understanding of masonry design. Experience in civil engineering design for water systems, including pipework, ground engineering, and service reservoir design. Good written and verbal communication skills, with an ability to collaborate across teams. Strong interest in learning, innovation, and continuous development. A solid understanding of health, safety, and welfare requirements in design. A proactive approach to learning and development, with a keen interest in embracing new technologies and improving efficiency. A commitment to safety, ensuring all designs comply with CDM regulations and health and safety practices.
Your Purpose As a Civil Engineer (Infrastructure), you will design and deliver water and wastewater infrastructure projects, focusing on applying engineering principles to provide practical, value-for-money solutions. You'll collaborate with multidisciplinary teams to produce high-quality designs and ensure that all work meets safety, technical, and environmental standards. This role offers the opportunity to work remotely, leading projects from feasibility through to construction and providing expertise in pipeline and infrastructure design. What You'll Be Doing Deliver clean water and wastewater infrastructure projects, applying engineering principles to produce innovative, cost-effective designs. Oversee the design and coordination of multidisciplinary teams to deliver pipeline designs, including pressure and gravity flow systems. Conduct design development from feasibility studies, optioneering, and detailed design through to final delivery. Prepare and review design documentation, including Impact and Commissioning plans, ensuring compliance with technical standards and specifications. Ensure designs are safe and in compliance with all relevant health, safety, and environmental regulations, including the preparation of Health and Safety Files. Assist in responding to technical queries and propose practical solutions to site challenges. Contribute to project delivery, managing sub-consultants, and ensuring designs are produced on time, within scope, and on budget. Participate in site surveys, risk assessments, and mitigation planning, ensuring designs align with site conditions. Work closely with internal and external stakeholders to ensure smooth project execution and foster collaborative relationships. Qualifications and Experience Required M Minimum B. Tech / M. Tech from an institution of repute. Extensive knowledge and experience of design in the water industry. An appreciation of the implications of works on the environment and knowledge of sustainable solutions, water and wastewater processes and health and safety legislation. The ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs. Proficiency in AutoCAD, REVIT or Plant 3D as well as MS Office Software. Strong interpersonal / team working skills, with a good working relationship with all levels of the organisation, clients and contractors Key points: A degree in Civil Engineering (or equivalent experience). Experience in the design of pipeline projects within the water and wastewater industry. Strong knowledge of pipeline construction techniques, materials, and their applications. Familiarity with computer-aided design and modelling tools. Experience in preparing design risk assessments and managing design quality. Excellent written and verbal communication skills, with the ability to collaborate effectively across multidisciplinary teams. A commitment to health, safety, and environmental compliance. An enthusiasm for continuous learning and applying innovative solutions in design. Experience in managing project design outputs and working within a Design & Build environment is advantageous. A proactive approach to learning and development, with a keen interest in embracing new technologies and improving efficiency. A commitment to safety, ensuring all designs comply with CDM regulations and health and safety practices.