QC Welding Inspector

Job Description:

• Btech/Dipolima Degree, Min 8+ Experience, 5 Years in Oil & GAS as QC inspector in EPC Companies on contruction projcets.
• CSWIP 3.1 Qualified

• Job Description
• Reports to Project Quality Manager and to perform inspection before , during & after welding activities.
• Check the bevel preparation - root gap, bevel angle, root face & joint cleanliness
• Verification of approval of procedure, welder, consumables & calibration certification
• Verify Preheat & back purging requirements
• Verify Size & type of electrodes used as per WPS.
• Checking weather conditions, weld area to be covered properly & interpass temperature.
• Carrying out visual inspection as per code & specification requirement.,
• After completion of visual inspection of weld joint , offer for NDT and Monitoring & checking NDT requirements.
• Check for PWHT & Hardness requirements as per service & code requirements
• Identify repairs and ensure identified defects are repaired and re-NDT is performed & accepted.
• Knowledge on code & specification requirement - ASME B31.3 /B31.4/ B31.8 , ASME IX, ASME IIA/B/C & API 1104.
• Raise RFI to client as per ITP requirement & co-ordinate for inspection .
• Perform surveillance inspection and raise NCR if any non conformity observed.
• Prepare work procedure & ITP as per project specification & code requirement . Follow up with client for approval.
• Potential issues are to identified and take corrective action immediately.
• Aramco standards Knowledge

• Preferable
• Previous Saudi Aramco experience as QC Welding Inspector & Aramco-CBT EXAM-PID Welding passed record preferable.

*

Job Type: Full-time

Pay: Up to ₹170,000.00 per month

Work Location: In person