344 Metallurgy Jobs - Page 6

We are looking for Process Engineers from Metal Industry. 1.Flash Smelting Furnace (FSF) Process 2. Copper Smelting & Refining 3. Pyrometallurgy & Extractive Metallurgy 4. Process Optimization & Control 5. Heat & Mass Balance Calculations 6. Slag & Matte Handling 7. Process Safety & Risk Management 8. Root Cause Analysis (RCA) 9. Gas Handling & Emission Control 10. Material & Energy Flow Analysis 11. PLC / DCS Operation & Monitoring 12. Commissioning & Troubleshooting PSC & AF Anode Furnace (AF) Operations 2. Copper Smelting & Refining 3. Pyrometallurgy & Extractive Metallurgy 4. Process Optimization & Control 5. Slag & Matte Handling 6. Heat & Mass Balance Calculations 7. Gas Handling & Emission Control 8. Oxygen & Air Injection Systems 9. Root Cause Analysis (RCA) 10. Process Safety & Risk Management 11. PLC / DCS Operation & Monitoring 12. Commissioning & Troubleshooting 13. SOP Development & Compliance SAP Refinery 1. Copper Electrorefining Process 2. Sulphuric Acid Plant (SAP) Refinery 3. Electrolysis & Cathode Production 4. Precious Metal Recovery (Gold, Silver, PGMs) 5. Anode & Cathode Quality Control 6. Impurity Removal & Purification 7. Acid & Electrolyte Management 8. Energy & Material Balance Calculations 9. Refractory & Equipment Maintenance 10. PLC / DCS Operation & Monitoring 11. Environmental & Emission Control 12. Safety & Compliance Standards 13. Root Cause Analysis (RCA) 14. Commissioning & Troubleshooting

Key Responsibilities: Production & Process Control Resource & Material Management Maintenance & Equipment Health Quality Assurance Cost Control & Efficiency Manpower & Team Management Compliance & Safety Reporting & Coordination

Key Responsibilities Supports the execution of fixed equipment asset strategies across complex process facilities. Participates in the Management of Change (MOC) process and provides support for facilities turnaround planning/execution scope related to material evaluations. The position shall support mechanical equipment fitness for service assessments in accordance with API codes and standards as well as providing support for Root Cause Investigations and other equipment related incidents. Supporting cross functional teams comprised of inspections, technical, operations, and maintenance. Actively works to maintain open and clear communication between Reliability group, Process and Design Engineering, Operations, and Project Services. Participates in the planning and development of engineering work packages for plant turnarounds and capital projects. Supports and updates plant corrosion/Damage Mechanism Reviews as part of the PHA process, Metallurgical Reviews, and Risk-Based Inspection (RBI) plans. Develops and reviews technical specifications relating to materials and corrosion. Mentors inspectors, engineers, and others in materials technologies such as materials selection, welding and fabrication, and corrosion control. Provides guidance on maintenance scope tasks including weld procedures reviews for materials requirements, post-weld heat treat, hydrogen bake-out, and welding applications, and requested Positive Materials Identification (PMI) testing reviews. Provide technical oversight and second level review of inspection findings and recommendations, asset strategy adjustments, and interpretation of inspection data. Required Qualifications Bachelor’s degree materials engineering/sciences from a recognized (AICTE) university . Minimum of 5 years’ experience in materials and corrosion engineering Preferred Qualifications Industry experience in supporting asset integrity or materials engineering practices within a complex oil and gas operating environment. Knowledge of refinery and LNG process technologies will be highly regarded

Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE) WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1 Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2 Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required Facilitate the sharing of technical expertise across projects including archival of project documents Provide and/or participate in training for resources assigned to the project Perform conceptual layout work Develop design details, prepare / extract drawings and check the deliverables prior to release Ensure coordination with engineers within the discipline and with other disciplines Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any Participate in formal engineering review processes Review vendor drawings and documents including archival and inputs to other disciplines Represents the discipline during site visit / client meetings as felt necessary by PE/PM Support technology team/ Project team for development and automation works as required

Production Supervisor in mechanical engineering and 3–4 years of experience in a manufacturing ,The candidate will have working knowledge of furnace operations, heat treatment, and metallurgy, along with strong communication skills, discipline.

Pattern Shop Supervise and manage all activities related to the pattern shop, including wood, metal, and plastic pattern making. Review and interpret technical drawings, foundry process requirements, and product specifications to guide pattern development. Coordinate with design, production, and quality teams to ensure pattern accuracy and readiness for casting. Maintain pattern inventory, ensuring proper tagging, storage, and documentation. Plan and schedule pattern repairs, modifications, and new pattern developments. Monitor the performance of pattern shop personnel and ensure adherence to safety and quality standards. Optimize the pattern-making process to reduce lead time and improve casting quality. 2. Mould & Core Assist in preparing and maintaining moulds and cores for casting processes. Support the moulding team in cleaning and preparing the moulding equipment. Assist in the assembly and disassembly of moulds and cores for casting. Monitor core-making processes and ensure quality standards are met. Report any defects or issues with moulds and cores to senior staff. 3. Melting Shop Assist in the operation of melting furnaces to produce molten metal. Monitor furnace conditions to maintain proper temperature and composition. Ensure proper material handling for metal scrap, alloys, and other inputs. Help with the maintenance of melting equipment and report any issues. Assist in casting metal into moulds for the next stage of production. 4. Maintenance Assist in routine maintenance of machinery and equipment to ensure proper functioning. Perform basic troubleshooting and repairs on production equipment and systems. Support preventive maintenance tasks , such as lubricating machines, cleaning, and replacing worn parts. Monitor equipment performance and report any abnormalities or breakdowns. Help with the installation and calibration of new machines or systems. Ensure the cleanliness and organization of maintenance tools and spare parts. Assist senior technicians in conducting regular inspections of equipment and systems. Ensure compliance with safety standards and company policies during maintenance activities.

-Ability to understand design documents for new product development/ project development. - Verification & Validation -Integration & field testing -Review & Reporting -Technical Document

Drive the strategic vision, growth, and profitability of the Nickel Alloy business unit. To scale the current unit from 150TPA to 500TPA. Degree in Metallurgy or related engineering discipline. Required Candidate profile Metallurgy background is essential; deep knowledge of high-performance alloys and their applications is highly valued. Proven track record in R&D, business development, and P&L responsibility.

Customer enquiry review including Quality planning, Order engineering and preparation of Quality plan. Quality plan preparation, CITP (Customer inspection & test Plan). Support to qualification of new product & process. Support to make to Customer Inspection Test Plan (CITP). Dimension capability study. Fare Knowledge of ASTM/ASME specification. Knowledge of NTD test & Laboratory test. EHS Responsibility Follow EHS guidelines and procedures, reporting hazards and potential improvement areas and participating in improving their work environment. Work according to Alleima Safety Principles towards the vision of zero harm. AUTHORITY & ACCOUNTABILITY Authority: Stop any process if product quality does not meet with customer / specification requirements and inform to concern stakeholders. Do not release order in PPC system till the customer requirements not proper clarity Accountability: To fulfil the customer requirements & Alleima internal requirement. REQUIRED COMPETENCIES Ability to work in team & flexibility. Communication skill Process & specification knowledge (ASME/ASTM/EN standards and client s spec) Auditing skill. Root cause analysis skill. EDUCATION Diploma/BE Mechanical or Metallurgy Engineer

Develop Concept, Preliminary, Detailed design, related calculations specification and documentation. Develop and analyse hydraulic models. Use the design knowledge to optimise and develop options for the storm drainage schemes. Multi Discipline coordination s and coordination s with LPOs and Clients. Develop sustainable solutions and try for carbon low designs working towards NetZero. Experience of CDE- ProjectWise, BIM 360, MS teams, SharePoint sites etc Develop/Check 3D models/ drawing, components and interface between design and BIM software s. Experience with Utility Clash analysis and Clash resolution Developing, improving design tools, checklists and coordination with GTC digital teams. Support in team development and skill enhancement. Apply AtkinsR alis Quality, Safety & Environmental (QSE) standards and Business Management System (BMS). Embrace digital engineering and promoting innovative engineering design solutions. Requirement: bachelors degree/masters degree in engineering from an institute of repute. 10+ years of experience in the Water & Wastewater Industry. Wet utilities design (storm, foul water, Potable water and TSE) for UK, Ireland Middle East and other regions. Middle East Work experience desired. Familiarization of Middle East Standards. Experience of major Infrastructure projects at Master plan, Concept and Detailed Design stages. Hands on experience of various software s like Microdrainage, CivilStorm, Sewergems/Watergems etc Working knowledge of BIM platforms like Civil3D, Microstation and/or Open Roads/ Inroads/ MX Road, Revit. Navisworks etc Clear knowledge of work procedures, and ability to brief project team. Good written and verbal English language communication skills. Positive Attitude and eagerness to learn and use new water related design software s, tools and processes for automation and digital efficiency as per the project and business requirement. Ability to work effectively with colleagues, seniors, team members and clients. A team player and work in collaboration. Chartered member or working towards chartership (ICE, CIWEM or equivalent). What We Can Offer You: Varied, interesting and meaningful work. A hybrid working environment with flexibility and great opportunities. Opportunities for training and, as the team grows, career progression or sideways moves. An opportunity to work within a large global multi-disciplinary consultancy on a mission to change the ways we approach business as usual. Why work for AtkinsR alis We at AtkinsR alis are committed to developing its people both personally and professionally. Our colleagues have the advantage of access to a high ranging training portfolio and development activities designed to help make the best of individual s abilities and talents. We also actively support staff in achieving corporate membership of relevant institutions. Meeting Your Needs: To help you get the most out of life in and outside of work, we offer employees Total Reward . Making sure youre supported is important to us. So, if you identify as having a disability, tell us ahead of your interview, and we'll discuss any adjustments you might need.

Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required Facilitate the sharing of technical expertise across projects including archival of project documents. Provide and/or participate in training for resources assigned to the project Perform conceptual layout work Develop design details, prepare / extract drawings and check the deliverables prior to release Ensure coordination with engineers within the discipline and with other disciplines Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any Participate in formal engineering review processes Review vendor drawings and documents including archival and inputs to other disciplines Represents the discipline during site visit / client meetings as felt necessary by PE/PM. Support technology team/ Project team for development and automation works as required.

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager Assist in the compilation and delivery of monthly engineering status reports Participate in and contribute to design reviews Represent the discipline in the project engineering coordination meetings Prepare and/or review project procedures, standard specifications and design criteria Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects Perform conceptual and detailed engineering design Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required Provide and/or coordinate training for resources assigned to the project Work to ensure the implementation of safety in design Ensures measurement of progress on all contracts for reporting and progress claim purposes. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership Support technology team/ Project team for development and automation works as required. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. Manage performance data of reportees and provide periodic feedback. Provides resource loading forecast to TL. Keeps records of learning s during the project and provides inputs to PM during job closure report. Prepare technical specifications/ bid evaluation/ technical recommendation where required Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Accountability Communication Teamwork

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager Assist in the compilation and delivery of monthly engineering status reports Participate in and contribute to design reviews Represent the discipline in the project engineering coordination meetings Prepare and/or review project procedures, standard specifications and design criteria Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects Perform conceptual and detailed engineering design Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required Provide and/or coordinate training for resources assigned to the project Work to ensure the implementation of safety in design Ensures measurement of progress on all contracts for reporting and progress claim purposes. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership Support technology team/ Project team for development and automation works as required. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. Manage performance data of reportees and provide periodic feedback. Provides resource loading forecast to TL. Keeps records of learning s during the project and provides inputs to PM during job closure report. Prepare technical specifications/ bid evaluation/ technical recommendation where required Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager Assist in the compilation and delivery of monthly engineering status reports Participate in and contribute to design reviews Represent the discipline in the project engineering coordination meetings Prepare and/or review project procedures, standard specifications and design criteria Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects Perform conceptual and detailed engineering design Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required Provide and/or coordinate training for resources assigned to the project Work to ensure the implementation of safety in design Ensures measurement of progress on all contracts for reporting and progress claim purposes. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership Support technology team/ Project team for development and automation works as required. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. Manage performance data of reportees and provide periodic feedback. Provides resource loading forecast to TL. Keeps records of learning s during the project and provides inputs to PM during job closure report. Prepare technical specifications/ bid evaluation/ technical recommendation where required Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity

Manage heat treatment operations, ensure quality and safety standards, optimize processes, oversee production schedules, and lead team for efficient and compliant operations.

Role & responsibilities Manage R&D for extraction of metals from ores following by refining by employing different techniques such as chemical purification, solvent extraction and other efficient methods. Preferred candidate profile Well experienced in hydrometallurgy and purification of metal-based chemicals., either in R&D OR actual production

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Ability to Learn Communicates Effectively Job Knowledge Technical Knowledge

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity

Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity

Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity

The Construction Engineer is responsible for overseeing and coordinating the project works contractors and maintaining the project performance goals. He coordinates work efforts and ensures activities are sequenced in accordance with the project schedule. A construction engineer must be a competent person in the construction business so that he accurately evaluates the methods and performance in all respects of the particular scope elements of the project for which he is accountable. Experience Minimum 5 10 years of onsite experience on major projects under any sector Infrastructure, Real Estate, Power, Steel or Chemical Involvement in at least 2 significant major project similar in size and scope as delivered by TCE Qualification Postgraduate or graduate in an engineering discipline Post graduate degree/diploma in construction management (preferable) Key Responsibilities 1. Monitors overall job site health, safety and environment performance and verifies that contractors are protecting their workers at the job site. 2. Responsible for construction supervision and contract administration including supervision of contractors and their subcontractors for assigned portions of the project. 3. Assists in the coordination of the design deliverables to support continuous and efficient construction. 4. Job site point of contact for all contractors in his assigned area of the project. 5. Plans and chairs project safety meetings, assists with incident investigations and reporting, and participates in TCE safety programs and initiatives. 6. Communicates the identification, management and resolution of deficiencies and non-conformance to the Construction Manager. 7. Assists with construction estimating, scheduling, reporting, cost control, measurement verification and invoice certification for all work being performed by the contractor in his assigned area of the project. 8. To lead complete Bill Certification process, Measurement of Quantities, resolution of extra scope for assigned construction area or structure or domain or discipline. Enforce Change Management and Request for Information (RFI) management process 9. During absence of the Construction Manager, act as administrative spokesperson. 10. Assist with the development and review of construction related information for the purpose of proposals and other related business improvement activities. 11. Participate in and provide construction input for project constructability plans. 12. To provide inputs for daily, weekly and monthly progress reports, track contractor s asking rates for major construction activities, to workout catch up plans suit to site conditions 13. Assist the Construction Manager to address site issues and developorimplement a remedy. 14. Assist in coordinating between constructions and commissioning and establishing an effective handover policy. 15. Ensures that Project safety plan and project quality plan is strictly implemented 16. Provides inputs for planning and billing activities

Highly skilled and experienced Casting & Machining Inspection Professional. Responsible for ensuring the quality of castings and machined components meet drawings, specifications and industry standards. Handson experience of CMM inspection. Responsibilities Operate CMM machine using established programs, as well as creating new programs using Calypso software. Perform dimensional inspection on product using CMM, calipers, micrometers, and height gauges. Perform visual and dimensional inspection on product per procedures. Perform first piece inspection and in-process inspections. Strong background concerning the usage and care of precision measuring tools and equipment. Ability to effectively read and understand blueprints, engineering documents, inspection manuals and procedures. Strong background programming and operating coordinate measuring machines (CMM). Strong metrology, blueprint reading, and GD interpretation skills. Must have practical experience performing in-process and final inspections. Must have experience using various mechanical inspection tools, such as micrometers and calipers. Maintain accuracy and attention to detail at all times and complete tasks in a timely manner. Knowledge of dimensional, visual and mechanical inspection processes. Proficiency using Microsoft Word and Excel. Able to apply common sense understanding to carry out work instructions furnished in written, oral or diagram form. Deal with issues involving several concrete variables in standardized situations. Ability to work with little supervision and make intuitive decisions when general instruction is given. Ability to work effectively with others in a team environment. Work closely with cross functional team design, manufacturing team to resolve discrepancies , improve part and optimize process. Analyse measurement data to identify trend , anomalies , and areas of improvement. Basic Qualifications Diploma or Bachelor s degree in mechanical engineering, Production, Metallurgy, or related field. Minimum 7 years of experience in quality control, CMM inspection, preferably in casting and machining industries. Strong knowledge of casting and machining processes GD & T and materials. Proficiency in inspection techniques, including visual and dimensional. Travel & Work Arrangements/Requirements Working in shift as per the requirement. Key Competencies Good Knowledge of GD & T, GA Drawing, codes & Standards (ASME, ASTM, ISO & IS etc.) Knowledge of Casting. Knowledge of machining process. Good communication skills with internal departments. What we Offer We are all owners of the company! Stock options (Employee Ownership Program) that align your interests with the companys success. Yearly performance-based bonus, rewarding your hard work and dedication. Leave Encashments Maternity/Paternity Leaves Employee Health covered under Medical, Group Term Life & Accident Insurance Employee Assistance Program Employee development with LinkedIn Learning Employee recognition via Awardco Collaborative, multicultural work environment with a team of dedicated professionals, fostering innovation and teamwork.

Sr. Mgr AGM DGM - Hot Refining : AboutCMR: CMRGreen Technologies Limited formerly known as Century MetalRecycling Limited is Indias largest producer of Aluminium and Zincdie-casting alloys with a combined annual capacity of over approx 4, 18, 000MT per annum. Since its inception in 2006, it has maintained its fast-pacedgrowth by leveraging latest technology and continuous improvement. CMR, which recycles aluminium scrap to make alloy, has 28-30 percent marketshare in India and is nearly three times larger than its nearestcompetitor. We are having strong presence at PAN India level (North, West & South) with 13 manufacturing units, 5000 strong workforce andsupplies to major automotive industry in India including tier one OEMslike Maruti Suzuki , Honda Cars , Bajaj Auto , Hero MotoCorp and Royal EnfieldMotors . Position/Designation: LeadOperations- Hot Refining JobBand/Designation: C / AGM/ DGM No.of Posts: 1 (One) Department: Operations- Hot Refining Reportingto: Plant Head Qualification:Essential: - Candidate should have fulltime Bachelor's degree in Mechanical/ Metallurgy or alliedEngineering, from reputed institute. Desired:- Masters degree in Metallurgy or in OperationManagement. Essential:- Minimum12 + years of experience in Hot Refining in Aluminium Industries. where in 3+years of experience in Hot refining in a managerialrole. Desired:- Experience withBillet/Slab DC casting will be added advantage and should be expert inHydraulics. Experience inWrought alloys is preferable. Project workingExperience is additional weightage. JobProfile Ensureavailability of manpower, material and machine for the plant and supervise theachievement of production. Carryout daily reviews with supervisors to understand and calibrate production, ongoing challenges and provide solutions for improvement. Approvedaily work plans for the shop floor to achieve production targets. Superviseand coordinate with maintenance lead to ensure availability and healthiness ofmachine and ensure maintenance schedules are followed. Involvedwith supervisors in Improvement projects & quality circles. Contributeto new alloy developing process. Review5 weeks mix plan with unit PPC & find out constraints which we have faceduring making alloy as per mix plan. Coordinatewith quality and sales and marketing team to address customer related issues. Ensuremonthly data reconciliation for production, cost, dross reconciliation, manpower. Ensuresafety of the workplace in accordance with EHS norms. CoreCompetencies: Metallurgy Processengineering Quality standards Costconsciousness Effectivecommunication Teamwork Knowledge sharingand learning Planning andorganisation Executionexcellence Resultsorientation General Age -32- 45years. CTC 19 LPAapprox. Candidate shouldnot be frequent job changer. Notice Period-Joining period Max 30 Days. We can buy notice period, if required Location It is a project stage at Tirupati, Andhra Pradesh. It is 35 kms fromTirupati, 15 Kms from Srikalahasthi, 20 Kms from Venkatagiri.

Excellent knowledge of production planning and quality control principles Working knowledge of MS Office and ERP systems Excellent communication abilities Strong regard for product quality and safety standards