Job Summary: Maxima is looking for a hands-on Site Supervisor with a strong background in Instrumentation Installation and Commissioning to manage and oversee field execution at project sites. The candidate will ensure all installation and commissioning work is carried out as per approved drawings, safety norms, and project timelines, maintaining coordination between site teams, contractors, and the project office. Key Responsibilities: Supervise and coordinate day-to-day site activities for instrumentation installation and commissioning work. Ensure installation of instruments (transmitters, sensors, control valves, etc.), panels, JB wiring, and cable laying is done as per drawings and specifications. Assist in commissioning tasks such as loop checking, calibration, signal testing, and interfacing with PLC/DCS systems. Coordinate with client representatives, consultants, and contractors for work permits, inspections, and issue resolution. Maintain accurate records of daily progress, manpower, and materials. Ensure adherence to safety practices and use of appropriate PPE by all personnel on site. Identify site issues, delays, or material shortages and report promptly to the Project Manager. Conduct toolbox talks and ensure execution teams are briefed on the day’s scope of work. Support documentation activities like Red Markup drawings, test reports, and commissioning logs. Qualifications & Experience: Diploma or ITI in Instrumentation / Electrical Engineering (or related discipline). 5–10 years of hands-on experience in industrial instrumentation site work. Experience in oil & gas, chemical, power, water treatment, or similar process industries preferred. Ability to read P&IDs, loop diagrams, instrument layouts, and termination drawings. Experience supervising teams and coordinating with contractors and engineers. Skills & Competencies: Practical knowledge of instrumentation devices and field installation practices. Familiarity with control systems (PLC/DCS) and communication protocols (HART, Modbus). Strong supervision and team management abilities. Good communication skills to interact with clients and internal teams. Safety-conscious and detail-oriented approach. Working Conditions: Site-based role with extended working hours during commissioning. Must be willing to travel and stay at project sites for extended periods. Physically fit to work in industrial environments and heights if required. Job Type: Full-time Benefits: Cell phone reimbursement Commuter assistance Health insurance Internet reimbursement Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Shift availability: Day Shift (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person Application Deadline: 15/08/2025 Expected Start Date: 15/08/2025
Job Summary: Maxima is seeking skilled and dedicated Site Technicians to carry out Instrumentation Installation and Commissioning work at various project sites. The technician will be responsible for the proper installation, wiring, termination, and commissioning support of field instruments, ensuring compliance with engineering drawings and safety standards. Key Responsibilities: Install field instrumentation including transmitters, switches, sensors, and control valves as per drawings. Lay and terminate signal and power cables at junction boxes, marshaling panels, and control panels. Assist in performing loop checks, instrument calibration, and signal testing during commissioning. Follow instructions from Site Supervisor/Engineer and ensure work is executed safely and efficiently. Conduct field marking, tagging, and cable tray installation. Maintain tools and equipment in good working condition. Report material shortages, installation issues, or deviations from drawings to supervisors. Adhere strictly to site safety regulations and wear required PPE at all times. Assist in testing and troubleshooting instruments during pre-commissioning and commissioning stages. Qualifications & Experience: ITI / Diploma in Instrumentation, Electrical, or Electronics. 2–5 years of experience in field instrumentation work in industrial environments. Knowledge of basic instrumentation principles and field installation practices. Experience with pressure, temperature, flow, level instruments, and valves. Exposure to calibration tools and test equipment preferred. Skills & Competencies: Ability to read basic engineering drawings (P&IDs, cable schedules, hookup diagrams). Practical knowledge of wiring, termination, and loop checking. Good manual skills and attention to detail. Strong work ethic, discipline, and willingness to learn. Basic communication skills to interact with site teams and supervisors. Working Conditions: Site-based role with extended working hours depending on project stage. Travel and long-term stay at project sites across India. Must be physically fit and comfortable working in industrial conditions. Job Type: Full-time Benefits: Cell phone reimbursement Commuter assistance Health insurance Internet reimbursement Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person Application Deadline: 15/08/2025 Expected Start Date: 15/08/2025
Should have knowledge of PLC Programming, SCADA screen development and HMI interfacing. Recommend and implement improvement to Distributed Control Systems, PLC, and other control systems Provide ongoing site support, which may include site visit, installation and commissioning activities. Distributed Control System configuration, commissioning, startup, and tuning Distributed Control System, field instrumentation, and valve-related situations troubleshooting and problem resolution Configuration optimization of both batch and continuous process control Loop tuning Troubleshooting field instrumentation and valve application Interfaces to PLCs, drives, and various control bus networks Job Type: Full-time Pay: From ₹15,000.00 per month Benefits: Cell phone reimbursement Schedule: Day shift Supplemental Pay: Performance bonus Ability to commute/relocate: Madipakkam, Chennai - 600091, Tamil Nadu: Reliably commute or planning to relocate before starting work (Required) Education: Bachelor's (Preferred) Experience: total work: 1 year (Required) Language: English (Preferred) Application Deadline: 15/08/2025 Expected Start Date: 15/08/2025
Electrician with ITI / Diploma in EEE for doing panel wiring, glanding, termination work etc. Should be able to read the wiring diagram. Job Type: Full-time Pay: ₹10,000.00 - ₹22,000.00 per month Work Location: In person Expected Start Date: 15/08/2025
Job Purpose: To install, assemble, calibrate, and maintain instrumentation and control systems in compliance with engineering drawings, technical specifications, and safety standards. Key Responsibilities: Read and interpret P&IDs, engineering drawings, and isometric diagrams for instrumentation works. Install, fit, and align instruments such as transmitters, gauges, controllers, and sensors on pipelines, vessels, and equipment. Carry out tubing work (SS / copper), impulse line routing, and fitting of valves, manifolds, and fittings. Assist in the calibration and functional testing of instruments before and after installation. Ensure proper support, clamping, and identification of instrument lines and cables. Coordinate with instrument engineers and supervisors during installation, commissioning, and maintenance activities. Maintain tools, materials, and consumables required for instrumentation works. Follow plant/site safety rules and ensure safe working practices. Troubleshoot and repair instrumentation fittings in case of leaks or alignment issues. Record and report work completion, non-conformities, and material requirements to supervisors. Skills and Qualifications: ITI / Diploma in Instrumentation, Electrical, or related trade. Proven experience as an Instrument Fitter in industrial projects (oil & gas, chemical, power, or manufacturing). Ability to read and interpret technical drawings and specifications. Hands-on experience with tube bending, swaging, and fitting of compression fittings. Knowledge of instrumentation standards (ISA, ISO) and safety requirements. Good communication and teamwork skills. Physical Requirements: Ability to work in outdoor/plant environments. Comfortable with climbing, standing for long hours, and handling tools. Job Types: Full-time, Permanent, Contractual / Temporary Contract length: 12 months Pay: ₹750.00 - ₹900.00 per day Benefits: Food provided Health insurance Provident Fund Work Location: In person
Job Purpose: To assist instrument fitters, welders, and technicians in installation, maintenance, and repair of instrumentation systems, ensuring smooth workflow and compliance with site safety standards. Key Responsibilities: Assist in carrying tools, materials, and equipment required for instrumentation works. Support instrument fitters and welders during installation of instruments, tubing, and supports. Help in preparation of work areas, cleaning, and basic assembly tasks. Perform simple tasks such as cutting, grinding, threading, or holding instruments/tubes under supervision. Ensure proper handling and storage of tools, fittings, and consumables. Maintain cleanliness and orderliness at work sites. Follow instructions from supervisors and senior technicians. Comply with safety regulations, use PPE, and follow site work permits. Skills and Qualifications: Minimum 10th pass / ITI preferred. Basic knowledge of tools and handling. Ability to follow instructions and work in a team. Willingness to learn instrumentation-related skills. Physically fit and able to work in industrial/site conditions. Physical Requirements: Ability to lift, carry, and move tools and materials. Comfortable working at heights or confined spaces as required. Job Types: Full-time, Permanent, Contractual / Temporary Contract length: 12 months Pay: ₹400.00 - ₹600.00 per day Benefits: Food provided Health insurance Provident Fund Work Location: In person
Job Purpose: To install, assemble, calibrate, and maintain instrumentation and control systems in compliance with engineering drawings, technical specifications, and safety standards. Key Responsibilities: Read and interpret P&IDs, engineering drawings, and isometric diagrams for instrumentation works. Install, fit, and align instruments such as transmitters, gauges, controllers, and sensors on pipelines, vessels, and equipment. Carry out tubing work (SS / copper), impulse line routing, and fitting of valves, manifolds, and fittings. Assist in the calibration and functional testing of instruments before and after installation. Ensure proper support, clamping, and identification of instrument lines and cables. Coordinate with instrument engineers and supervisors during installation, commissioning, and maintenance activities. Maintain tools, materials, and consumables required for instrumentation works. Follow plant/site safety rules and ensure safe working practices. Troubleshoot and repair instrumentation fittings in case of leaks or alignment issues. Record and report work completion, non-conformities, and material requirements to supervisors. Skills and Qualifications: ITI / Diploma in Instrumentation, Electrical, or related trade. Proven experience as an Instrument Fitter in industrial projects (oil & gas, chemical, power, or manufacturing). Ability to read and interpret technical drawings and specifications. Hands-on experience with tube bending, swaging, and fitting of compression fittings. Knowledge of instrumentation standards (ISA, ISO) and safety requirements. Good communication and teamwork skills. Physical Requirements: Ability to work in outdoor/plant environments. Comfortable with climbing, standing for long hours, and handling tools. Job Types: Full-time, Permanent, Contractual / Temporary Contract length: 12 months Pay: ₹750.00 - ₹900.00 per day Benefits: Food provided Health insurance Provident Fund Work Location: In person
Job Purpose: To perform high-quality welding and fabrication of small-bore tubing, instrument supports, brackets, and related assemblies for instrumentation and control systems, ensuring compliance with engineering specifications, safety standards, and quality requirements. Key Responsibilities: Carry out welding of stainless steel, carbon steel, and alloy materials for instrumentation works (e.g., tubing, impulse lines, brackets). Perform TIG (GTAW) welding on small-bore piping and tubing as per drawings and WPS (Welding Procedure Specification). Fabricate and install supports, trays, and mounting structures for instruments and tubing. Read and interpret isometric drawings, P&IDs, and fabrication sketches. Ensure proper fit-up, alignment, and finishing of weld joints. Conduct visual inspections and maintain weld quality to meet project/QC standards. Coordinate with instrument fitters and supervisors for installation works. Maintain tools, welding machines, and consumables in good working condition. Follow all site safety rules, including hot work permit procedures. Record work completion and report material requirements or issues to supervisors. Skills and Qualifications: ITI / Diploma in Welding or related trade. Proven experience as a TIG Welder in industrial projects (oil & gas, petrochemical, power, or manufacturing). Strong knowledge of welding procedures, symbols, and quality standards. Skilled in welding thin-wall SS tubing and small-bore piping. Familiarity with QA/QC inspection requirements (WPS, PQR, WPQ). Ability to work independently and as part of a team. Good knowledge of safety requirements for hot works. Physical Requirements: Ability to work in plant/site conditions, including confined spaces and heights. Comfortable with handling welding machines, grinders, and other tools. Job Types: Full-time, Permanent, Contractual / Temporary Contract length: 12 months Pay: ₹700.00 - ₹900.00 per day Benefits: Food provided Health insurance Provident Fund Work Location: In person
Job Purpose: Responsible for installing, maintaining, and repairing electrical systems and equipment to ensure safe and reliable operation in compliance with electrical codes and safety standards. Key Responsibilities: Read and interpret electrical drawings, wiring diagrams, and circuit layouts. Install, repair, and maintain electrical systems, wiring, lighting, motors, control panels, and equipment. Conduct preventive and corrective maintenance on electrical systems. Perform troubleshooting and fault-finding on electrical circuits and equipment. Ensure proper earthing, grounding, and cable terminations. Test electrical systems using appropriate tools (multimeter, megger, etc.) to verify functionality and safety. Comply with electrical codes, standards, and company safety policies. Support other departments during equipment installation and commissioning. Maintain logs, records, and reports of electrical works carried out. Respond promptly to breakdowns and emergencies to minimize downtime. Skills and Qualifications: ITI / Diploma in Electrical or related field. Proven experience as an Electrician in industrial environment. Knowledge of electrical standards (IE Rules, NEC, IEC). Hands-on experience in wiring, conduit installation, and cable management. Ability to troubleshoot and repair electrical faults independently. Awareness of lockout-tagout (LOTO) and electrical safety practices. Good teamwork and communication skills. Physical Requirements: Ability to work in shifts, at heights, or in confined spaces if required. Comfortable handling tools, ladders, and electrical equipment. Job Types: Full-time, Permanent, Contractual / Temporary Contract length: 12 months Pay: ₹750.00 - ₹900.00 per day Benefits: Food provided Health insurance Provident Fund Work Location: In person
Job Purpose: To plan, coordinate, and execute instrumentation and control system projects from design through commissioning, ensuring technical compliance, timely delivery, and cost effectiveness while meeting client and safety requirements. Key Responsibilities: Prepare project execution plans, schedules, and resource requirements for instrumentation works. Review and interpret P&IDs, datasheets, hook-up drawings, control logic, and vendor documents. Coordinate with engineering, procurement, and construction teams to ensure smooth project execution. Supervise installation, testing, and commissioning of instruments, control systems, and field devices. Manage subcontractors, site engineers, and technicians to ensure quality and timely completion of works. Participate in FAT, SAT, loop checking, and system integration testing. Ensure compliance with project specifications, QA/QC procedures, and HSE standards. Handle client communication, attend project review meetings, and resolve technical queries. Track project progress, monitor costs, and prepare periodic status reports. Support documentation, as-built drawings, and project handover activities. Skills and Qualifications: Bachelor’s Degree in Instrumentation / Electronics / Control Engineering. 3–7 years of experience in instrumentation project execution (oil & gas, petrochemical, power, or industrial automation). Strong knowledge of instrumentation systems (DCS, PLC, transmitters, sensors, control valves, analyzers, etc.). Familiarity with international standards (ISA, IEC, ISO, NEC). Hands-on experience in installation, calibration, and commissioning. Strong leadership, planning, and communication skills. Ability to manage multiple tasks and teams under tight deadlines. Physical Requirements: Willingness to work at project sites and travel as required. Ability to work extended hours during commissioning and project deadlines. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Health insurance Provident Fund Work Location: In person
You will be responsible for leading Instrumentation Installation and Commissioning projects across industrial facilities. Your key responsibilities will include: - Planning and managing end-to-end execution of instrumentation installation and commissioning projects. - Coordinating with engineering, procurement, and site execution teams to ensure timely delivery of project milestones. - Leading site teams to ensure adherence to drawings, specifications, and safety protocols. - Supervising installation of field instruments, control panels, junction boxes, cabling, and signal testing. - Overseeing commissioning activities including loop checks, functional tests, calibration, and integration with control systems (PLC/DCS/SCADA). - Liaising with clients, consultants, and subcontractors to manage expectations, site issues, and approvals. - Maintaining and monitoring project schedules, budgets, risk assessments, and progress reports. - Ensuring compliance with industry standards (e.g., ISA, IEC), and Maxima's quality and safety guidelines. - Preparing and submitting documentation such as ITPs, FAT/SAT reports, and commissioning protocols. - Supporting handover and final acceptance with all necessary documentation and client sign-offs. Qualifications & Experience: - Bachelors degree in Instrumentation Engineering, Electrical Engineering, or equivalent. - 8-12 years of relevant experience in project execution of instrumentation systems, preferably in oil & gas, power, pharma, or process industries. - Proven track record managing site activities from installation through commissioning. - Strong knowledge of industrial instrumentation (transmitters, analyzers, control valves, etc.). - Familiarity with control systems (PLC, DCS) and communication protocols (HART, Modbus, Profibus). - Experience in working with EPC firms, OEMs, and client representatives. - PMP certification (preferred but not mandatory). Skills & Competencies: - Project management and leadership skills. - Technical expertise in instrumentation and control systems. - Excellent communication and interpersonal skills. - Strong organizational and time management capabilities. - Problem-solving mindset and ability to work under pressure. - Proficient in MS Project, AutoCAD, and project documentation tools. Working Conditions: - Willingness to travel to project sites (domestic and/or international). - Ability to work in industrial environments and follow all HSE guidelines. Please note that the job type is full-time with benefits such as cell phone reimbursement, commuter assistance, health insurance, internet reimbursement, and provident fund. The work schedule is during the day shift with a performance bonus. The work location is in person. If you are interested, you can speak with the employer at +91 9500026069. The application deadline is 15/05/2025, and the expected start date is also on 15/05/2025.,
Key Responsibilities Prepare detailed electrical designs and drawings using AutoCAD Electrical (schematic wiring diagrams, control panel layouts, wiring layouts, single-line diagrams etc.). Generate and maintain Bill of Materials (BOMs) for electrical components, control panels, cables, and other related parts. Design electrical control panels: LTC panels, MCC panels, VFD/drive panels, power distribution, maybe switchgear. Ensure designs comply with relevant safety, regulatory, and industry standards (e.g. IEC, IS, local norms), especially for panels and wiring. Coordinate with other departments: mechanical, production/fabrication teams, procurement, QA to ensure design feasibility and assembly. Revise drawings and designs per feedback / changes during manufacturing or from clients. Support testing, installation, commissioning (or at least handover to production / field teams) of the electrical systems. Maintain proper documentation: design documents, revision history, version control of drawings, testing or quality check documents. Possibly involvement in costing / quoting (estimating component costs based on BOMs), ensuring designs are cost-efficient. Qualifications / Skills Required Diploma / BE / B.Tech in Electrical Engineering, Electrical & Electronics, or similar discipline. Good proficiency in AutoCAD Electrical (2D and possibly 3D). Experience in designing electrical panels, wiring, schematics, layout design. Familiarity with electrical components: switches, relays, MCCBs, contactors, PLCs etc. Understanding of standard electrical practices: cable sizing, load calculation, grounding/earthing, safety norms. Ability to read and interpret client / project / site requirements, drawings, electrical / mechanical interfaces. Works well with cross-functional teams and communicate clearly: procurement, mechanical, production. Attention to detail and accuracy (to avoid errors in wiring, safety, compliance). Probably 1-3 years (or more) of experience in similar role, depending on level. Desirable Exposure to PLC / VFD / automation control panels. Knowledge of industry-specific standards or regulations. Experience with other design tools (EPLAN, SolidWorks Electrical etc.) might be a plus. Ability to manage multiple projects / timelines. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹20,000.00 per month Benefits: Cell phone reimbursement Health insurance Provident Fund Work Location: In person