Position: Quality Control Engineer. (JSW/SAI Ref: Quality Technician & Quality Inspector) Designation: Jr Engineer/ Staff Experience: 03 to 06 Years Value Stream: Quality Composite Material- Incoming, Assembly, Integration and Testing. Educational Qualification: Diploma in Mechanical Engineering Job Description: Quality Control Execution, Inspection, Testing of UAV sub-assemblies and Assemblies Job Responsibility: Quality Inspection of Material/ item being received at incoming stage, Assembly, Integration and testing of UAV (experience in LV / Missile is also acceptable). Experience in composite prepreg layup, vacuum bagging and aerospace structural assembly. Knowledge of Special Processes (Painting, Heat Treatment, etc) Development of Quality Data Pack related to Material, BOI and Detail Parts including development of inspection plans/procedures/WI and methods suitable for mass production. Knowledge of AIT processes and related Quality In-process. Performing Assembly Inspection of metallics and composites as per Inspection plan. Planning, Scheduling and Executing daily inspection activities. Knowledge of AS9102 & AS9100 standards, ERP System Management, PLM, NADCAP, ISMS, EHS, OHSAS is essential. Capture deviations during inspections, preparing NCR and performing RCA along with implementation of Corrective action. Hands on experience of measuring instruments required for inspection of detail parts, assembly, composites, 3D printed parts and standard BOI. Knowledge of reports review and verification. Cross Functional Work Experience to collaborate and mitigate problems. Strong knowledge in RCA tools, CAPA expected. Knowledge of QC tools and related Quality In-process. Preparation of final documentation for customer as per pre-defined format. Exposure to Customer, regulatory Clearances and audit processes. Basis knowledge about APQP, PPAP, FAI, PFMEA, including basic knowledge NDT, DT and Special Processes.
JOB DESCRIPTION (JD06) Position: Quality Control Engineer. (JSW/SAI Ref: Quality Technician & Quality Inspector) Designation: Jr Engineer/ Staff Experience: 03 to 05 Years Value Stream: Quality Incoming, Assembly, Integration and Testing Educational Qualification: Diploma in Electrical & Electronics OR Electronics & Communication Job Description: Quality Control Execution, Inspection, Testing of UAV sub-assemblies and Assemblies Job Responsibility: Quality Inspection of Material/ item being received at incoming stage, Assembly, Integration and testing of UAV (experience in LV / Missile is also acceptable). Development of Quality Data Pack related to Material, BOI and Detail Parts including development of inspection plans/procedures/WI and methods suitable for mass production. Knowledge of AIT processes and related Quality In-process. Handson experience of Harness manufacturing and PCB integration as per IPC/WHMA-A-620 and IPC-A-610. Performing final testing/ Pre-Functional Test as per Acceptance Test Plan and maintain inspection record. Planning, Scheduling and Executing daily inspection activities. Capture deviations during inspections, preparing NCR and performing RCA along with implementation of Corrective action. Cross Functional Work Experience to collaborate and mitigate problems. Strong knowledge in RCA tools, CAPA expected. Knowledge of MIL-STD/ JSS for conducting Environmental and EMI/EMC testing. Experience in clearances of Ground Handling Equipment and Ground Support Equipment and its associated assemblies. Preparation of final documentation for customer as per pre-defined format. Basic knowledge of Materials, BOI, Standard Items, LRUs, PCBs and Detail parts and its Quality clearances. Experience in Operation of Test Equipment's, Electronic Testing, CMM, Other 3D Measurement Exposure to Customer, regulatory Clearances and audit processes. Basis knowledge about APQP, PPAP, FAI, PFMEA, including basic knowledge NDT, DT and Special Processes. Work Experience in ERP, PLM and related production systems for management of Quality execution.
Position : Production Technician (Electrical & Electronics) Value Stream : Assembly (PCB) Experience : 3-5 Years. Educational Qualification : Diploma in Electronics, Electrical Engineering or a related technical field. Job Description : The Production Technician (Electrical & Electronics) is responsible for assembling of PCB modules for installation on UAV including interpretation of schematics, handling of components with ESD safety. Able to assemble, inspect and repair Printed Circuit Boards (PCB) to ensure reliable electronic circuit. Responsibility PCB Assembly & Rework: Assemble and rework surface-mount (SMT) and through-hole components on PCBs using precision tools and hot air rework stations. Perform trace repair, pad reconstruction, and jumper wire installation. Soldering & Desoldering: Perform manual soldering and desoldering of PCB components. Testing & Troubleshooting: Conduct functional and continuity testing of PCB assemblies. Diagnose and resolve faults such as shorts, opens, and signal integrity issues. Inspection & Quality Control: Carry out visual inspections to verify solder quality, component placement, and overall PCB integrity. Ensure compliance with IPC-A-610, AS9100, and customer-specific quality standards. Documentation & Reporting: Maintain records of test results, rework activities and inspection findings. Update technical documentation to reflect modifications, repairs and component changes. Compliance & Safety: Follow ESD protection protocols, safety standards requirements during all PCB handling and repair activities. Collaboration & Support Coordinate with design engineers, quality teams, and production staff to resolve technical issues and support continuous improvement. Workstation Hygiene & Efficiency Maintain a clean, organized, and ESD-safe workstation in accordance with 5S and lean manufacturing principles. Ensure proper care and calibration of tools, equipment, and rework stations. Skill Set Requirement PCB Assembly & Rework : Skilled in assembling and reworking PCBs with through-hole and SMD components. Proficient in soldering, desoldering, trace repair, and jumper wire installation using IPC-7711/7721 standards. Schematic & Layout Interpretation : Able to read and understand PCB layouts, electrical schematics, and wiring diagrams with accuracy. Component & Connector Handling : Experienced in handling electronic components and aviation-grade connectors with proper ESD precautions. Testing & Troubleshooting : Proficient in using multimeters, oscilloscopes, and ATE for fault diagnosis and signal integrity checks. Tool Proficiency : Hands-on experience with soldering irons, hot air stations, reflow ovens, microscopes, and ESD-safe tools.
Position : Production Technician (Electrical & Electronic) Value Stream : Assembly Experience : 3-5 Years. Educational Qualification : Diploma in Electrical/ Electronic Engineering / Mechatronics / Aerospace Engineering. Job Description : The Production Technician is responsible for the assembly, integration, testing of electrical and electronic systems in unmanned aerial vehicles (UAVs). This role demands a high level of technical proficiency, attention to detail and a commitment to quality and safety standards. Responsibility Electrical System Integration: Execute precise installation and routing of electrical harnesses for avionics, propulsion control, payload interfaces, and onboard power systems. PCB Assembly and Diagnostics: Assemble, inspect, and validate PCBs used for various UAV systems. Perform rework and functional testing of PCBs. Navigation Sensor and Payload Installation: Integrate and calibrate electrical interfaces for UAV sensors and mission-critical payloads including EO/IR, SAR, GNSS (Global Navigation Satellite System) , INS (Inertial Navigation system), ADU (Air Data Unit) and data link modules. Ground Systems Integration (GDT, GCS, ADT): Configure and maintain electrical connectivity for Ground Data Terminals (GDT) , Ground Control Stations (GCS) , and Airborne Data Terminal (ADT) systems supporting telemetry, command uplink and real-time video downlink operations. System-Level Troubleshooting: Conduct fault isolation and diagnostics on electrical subsystems using multimeters, oscilloscopes, and automated test equipment. Flight Readiness and Ground Testing Support: Assist in pre-flight electrical validation and ground control system setup. Collaboration and Continuous Improvement: Work closely with engineers, quality inspectors, and fellow technicians to resolve issues and improve processes. Participate in root cause analysis and contribute to corrective actions. Skill Set Requirement Experienced UAV Technician: Skilled UAV Electrical and Electronics Technician with hands-on experience in the assembly and integration of electrical and electronic components onboard Unmanned Aerial Vehicle (UAV). Wiring Harness Fabrication and Installation: Proficient in fabricating and installing aerospace-grade wiring harnesses. Skilled in routing and securing cables on UAV structure. PCB Integration and Component Handling: Experienced in integrating and mounting PCBs into UAV systems, ensuring proper mechanical fit and electrical connectivity. Knowledge of IPC-A-610 standards for PCB assembly and inspection. Electrical Testing and Diagnostics: Skilled in using tools such as multimeters, oscilloscopes, LCR meters, and continuity testers to verify circuit integrity and diagnose faults. Repair and Rework of Electrical Systems: Capable of identifying and repairing damaged wires, connectors, and PCB components. Proficient in desoldering, re-soldering, and connector re-termination. Tool Proficiency and Safety Compliance: Hands-on experience with crimping tools, wire strippers, heat guns, torque tools, electronic test equipment. Documentation & Reporting: Ability to fill work completion logs accurately and clearly. Understands the importance of documentation, traceability and compliance in UAV electrical systems.
Position : Production Technician (Mechanical) Value Stream : Assembly Experience : 3-5 Years. Educational Qualification : Diploma in Mechanical Engineering/Mechatronics/Aerospace Engineering. Job Description : The Production Technician is responsible for executing high-precision manufacturing and assembly operations of Unmanned Aerial Vehicle (UAV) . The role demands strong technical skills, attention to detail and adherence to aerospace quality and safety standards. Responsibility Interpretation of Technical Drawings: Understand and interpret GD&T and complex assembly drawings to ensure accurate fabrication and assembly. Identify tolerances, fits and critical dimensions during assembly operations. Execute Manufacturing & Assembly Operations: Carry out manufacturing and assembly tasks by strictly following work instructions, engineering drawings and production plans. Ensure all components and assemblies meet dimensional and functional specifications. Integration of Flight Control Surfaces: Perform installation and alignment of flight control surfaces including servo control adjustments. Ensure smooth and accurate movement of control systems as per OEM standards. Structural Assembly and Fastening Operations: Execute structural assembly processes involving sealants, fasteners, riveting. Ensure proper torque, alignment, and bonding of components to maintain structural integrity. Quality Compliance: Ensure all work is executed in alignment with defined quality compliance protocols and approved assembly procedures. Collaboration and Continuous Improvement: Work closely with engineers, quality inspectors, and fellow technicians to resolve issues and improve processes. Participate in root cause analysis and contribute to corrective actions. Maintain Workstation Hygiene and Safety: Keep the assigned workstation clean, organized, and compliant with safety and 5S standards. Support a lean and efficient work environment by maintaining tools and equipment properly. Skill Set Requirement Mechanical Assembly, Maintenance & Aerodynamics Proficient in assembling UAV airframes, propulsion systems and payload mounts with a strong ability to diagnose and repair mechanical failures. Bonding & Surface Preparation: Experienced in preparing UAV surfaces and structures for bonding and applying adhesives and sealants. Tool Handling and Precision Drilling & Fastening: Hands-on experience in hole drilling , countersink (CSK) drilling , riveting and fastening using aerospace-grade tools and techniques. Skilled in operating various hand tools and attachments including pneumatic and electric tools, torque wrenches, and precision measuring instruments. Technical Drawing Interpretation & Metrology Knowledge: Understanding of Geometric Dimensioning & Tolerancing (GD&T) and the ability to read and interpret complex assembly and engineering drawings. Familiarity with measuring instruments like vernier calipers, micrometers, height gauges, and dial indicators for dimensional inspection Documentation & Reporting: Ability to interpret work instructions and fill out work completion logs accurately and clearly.
Position : Production Supervisor Designation : Sr. Engineer/Engineer Value Stream : Electrical/Electronics Assembly Educational Qualification : BE/B Tech/Diploma Electrical/Electronics/Aerospace Engineering. Experience : BE/BTECH :3-5 Years. Diploma: 8-12 yrs Job Description : A Production Supervisor is responsible for overseeing the actual production flow within the shop floor. This includes managing work distribution, tracking Plan vs. Actual performance, maintaining 5S standards, and ensuring workplace safety. The role also involves close coordination with supporting departments such as Planning, Maintenance, Quality, and Stores to ensure timely execution of production activities as per the defined schedule. Job Responsibilities: Shift Planning & Workforce Allocation Develop and manage weekly shift schedules aligned with production forecasts, ensuring balanced shift rotation and optimal utilization of manpower across workstations. Daily Operational Leadership Conduct structured shift opening meetings to communicate daily production plans, quality objectives, and safety protocols, ensuring team alignment and readiness. Production Monitoring & Issue Resolution Oversee real-time progress at each assembly station, proactively identifying bottlenecks and coordinating timely resolution of technical or process-related issues. Quality & Compliance Management Ensure full compliance with AS9100, NADCAP, and QMS standards; lead audit preparations and effectively close non-conformities and observations with proper documentation and root cause analysis. Cross-Functional Coordination Collaborate with PPC, Maintenance, Quality, and Stores departments to resolve operational challenges, streamline material flow, and maintain uninterrupted production continuity. Continuous Improvement Proficient in lean tools such as 5S, Kaizen, Poka-Yoke. Promote continuous improvement through lean principles, effective utilization of equipment and workforce. Fostering autonomy of machines and equipment to enhance operational efficiency. Team building and Skill enhancement Facilitate team-building initiatives and skill enhancement programs to foster collaboration, growth, and high-performance culture. Job Skill Set Requirements: UAV Electrical Systems Expertise Hands-on experience in electrical and electronic systems UAVs including integration, testing and troubleshooting of flight control, power generation system, datalink system etc. Ground Control & Communication Systems Proficient in the assembly, configuration of Ground Control Stations (GCS) and Ground Data Terminals (GDT). Strong understanding of UAV datalink and communication systems including SATCOM, C-band, S/L-band, and UHF-band technologies. Navigation Systems Hands-on experience on UAV navigation equipment such as INS (Inertial Navigation system), GNSS (Global Navigation and Satellite System, ADU (Air Data System), Magnetometer, AIS (Aircraft Identification System) etc. Understanding of UAV automatic landing systems such as infrared (IR) landing, laser-guided landing, DGPS (Differential Global Positioning System)-based landing and real-time kinematic (RTK) navigation. Payload Integration & Diagnostics Knowledge of payload systems including Synthetic Aperture Radar (SAR), Inverse SAR (ISAR), Forward Looking Infrared (FLIR) and DAY camera, ELINT (Electronic Intelligence and COMINT (Communication Intelligence). Experienced in payload installation, configuration and fault diagnosis. Telemetry & Downlink Data Analysis Skilled in analyzing telemetry data for fault identification and performance evaluation. Experienced in power-on testing of UAV including sensor calibration and payload configuration. Technical Interpretation & Assembly Processes Strong ability to interpret complex assembly drawings, GD&T symbols, and technical documentation; experienced in various assembly processes including sealant application, riveting, welding, and fastener installation. PCB Assembly & Wiring Harness Proficient in wiring harness layout, bonding, grounding, and electrical routing. Knowledge of IPC standards (IPC-A-600, IPC-7711/7721) to design, inspect and repair PCBs. UAV Power Generation and Battery Systems Strong understanding of UAV power generation architecture including alternators, rectifiers, converters, and distribution units. Experienced in diagnosing power-related faults and ensuring stable electrical supply to avionics, payloads and propulsion systems. Practical experience in managing battery workshops, including maintenance of dry & liquid batteries.
Position : Production Supervisor Designation : Sr. Engineer/Engineer Value Stream : Mechanical/Structural Assembly Educational Qualification : BE/B Tech/Diploma Mechanical/Aerospace Engineering. Experience : BE/BTECH :3-5 Years. Diploma: 8-12 yrs Job Description : A Production Supervisor is responsible for overseeing the actual production flow within the shop floor. This includes managing work distribution, tracking Plan vs. Actual performance, maintaining 5S standards, and ensuring workplace safety. The role also involves close coordination with supporting departments such as Planning, Maintenance, Quality, and Stores to ensure timely execution of production activities as per the defined schedule. Job Responsibilities: Shift Planning & Workforce Allocation Develop and manage weekly shift schedules aligned with production forecasts, ensuring balanced shift rotation and optimal utilization of manpower across workstations. Daily Operational Leadership Conduct structured shift opening meetings to communicate daily production plans, quality objectives, and safety protocols, ensuring team alignment and readiness. Production Monitoring & Issue Resolution Oversee real-time progress at each assembly station, proactively identifying bottlenecks and coordinating timely resolution of technical or process-related issues. Quality & Compliance Management Ensure full compliance with AS9100, NADCAP, and QMS standards; lead audit preparations and effectively close non-conformities and observations with proper documentation and root cause analysis. Cross-Functional Coordination Collaborate with PPC, Maintenance, Quality, and Stores departments to resolve operational challenges, streamline material flow, and maintain uninterrupted production continuity. Continuous Improvement Proficient in lean tools such as 5S, Kaizen, Poka-Yoke. Promote continuous improvement through lean principles, effective utilization of equipment and workforce. Fostering autonomy of machines and equipment to enhance operational efficiency. Team building and Skill enhancement Facilitate team-building initiatives and skill enhancement programs to foster collaboration, growth, and high-performance culture. Skill Set Requirement: UAV Systems Expertise Hands-on experience on UAV with strong knowledge of structural and airframe systems including flight controls, propulsion, hydraulic and pneumatic systems. Propulsion & Engine Handling Well-versed in UAV propulsion system integration and performance tuning. Practical experience in assembly, calibration and maintenance of engines for UAVs. Flight Control & Servo Mechanisms Carry out integration of flight control surfaces with the airframe, including servo control rod adjustments to ensure optimal system alignment. Fabrication & Structural Repairs Skilled in repair techniques of UAV structure and parts. Capable of executing structural repairs in line with aerospace standards. Technical Interpretation & Assembly Processes Strong ability to interpret complex assembly drawings, GD&T symbols, and technical documentation. Experienced in various assembly processes including sealant application, riveting, welding and fastener installation. Aircraft Weighing & CG Analysis Knowledge of UAV weight and balance procedures. Capable of interpreting weight-balance sheets and configuring center of gravity (CG) data for flight readiness. Fixture & Tooling Knowledge Familiar with various categories of assembly fixtures, including their qualification, usage and preventive maintenance practices to ensure tooling reliability and accuracy. Knowledge of aviation POL (Petroleum, Oil, Lubricant) management Handling, storage and usage of fuels and lubricants in compliance with safety and operational standards for UAV ground and flight operations.