Job Description We are looking for a Final Quality Inspector to check and approve the quality of finished castings before dispatch. The role requires experience in visual inspection, dimensional checking, and documentation. Key Responsibilities Perform visual inspection of CI and SG castings for surface defects, cracks, blow holes, etc. Conduct dimensional inspection using tools like Vernier, micrometer, and gauges Check castings as per drawing specifications and quality standards Prepare final inspection reports and mark OK / Not OK status Ensure that only approved parts go for dispatch or machining Report non-conformities and assist in rejection analysis Work closely with production and quality team to resolve issues Maintain inspection tools and follow safety and 5S practices Help during customer audits and third-party inspections Qualifications & Skills ITI / Diploma in Mechanical Engineering (or relevant field) 2–5 years of experience in quality inspection (foundry preferred) Good understanding of castings and machining drawings Able to use measuring instruments accurately Basic documentation and report writing skills Knowledge of NDT / hardness testing is an added advantage Must be detail-oriented , disciplined, and team-focused Job Types: Full-time, Permanent Pay: ₹18,000.00 - ₹21,000.00 per month Benefits: Cell phone reimbursement Schedule: Day shift Supplemental Pay: Performance bonus Yearly bonus
Position Overview The Marketing Executive will be responsible for promoting Impel Ferrocast’s products (castings, machined components, and engineering solutions), developing new business opportunities, maintaining strong customer relationships, and supporting the company’s growth in domestic and export markets. Key Responsibilities Business Development & Sales Identify and generate new leads in domestic and international markets. Develop relationships with OEMs, Tier-1 suppliers, and other target customers. Prepare and submit quotations, proposals, and technical-commercial offers. Negotiate terms of business and close sales orders. Customer Relationship Management Maintain strong relationships with existing customers. Act as the first point of contact for customer queries and requirements. Coordinate with internal teams (production, quality, logistics) to ensure on-time delivery and customer satisfaction. Market Research & Analysis Conduct market studies to identify new opportunities in the casting/engineering sector. Track competitor activities, pricing trends, and customer requirements. Provide regular reports to management on market developments. Marketing Activities Participate in trade shows, exhibitions, and industry networking events. Support digital marketing, branding, and promotional campaigns. Assist in preparing marketing materials such as brochures, presentations, and case studies. Documentation & Coordination Preparation of Quotes, Delivery Challans (DC) & Invoices. Prepare sales forecasts, MIS reports, and customer visit reports. Ensure timely submission of contracts, agreements, and customer documentation. Liaise with Accounts & Logistics for invoicing, dispatches, and payment follow-up. Qualifications & Skills Bachelor’s degree in Mechanical/Metallurgy/Industrial Engineering or Business/Marketing (preferred). 1–4 years of experience in marketing/sales (preferably in foundry, automotive, or engineering components industry). Strong communication, presentation, and negotiation skills. Knowledge of castings, machining, and engineering products will be an added advantage. Proficiency in MS Office, CRM tools, and email correspondence. Willingness to travel for customer visits and exhibitions (domestic & overseas). Key Competencies Result-oriented and target-driven approach. Strong problem-solving and analytical skills. Ability to work independently as well as in a team. Customer-centric mindset with excellent relationship-building ability. Compensation & Benefits Salary: As per industry standards & candidate profile. Performance-based incentives. Opportunities for professional growth and international exposure. Job Types: Full-time, Permanent Pay: ₹18,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Provident Fund Work Location: In person
We are hiring *CNC Machine Operators* to run and operate *VMC, Turning, HMC, and VTM machines*. The candidate will be responsible for operating the machines, maintaining quality, and supporting the production team. *Key Responsibilities* * Operate CNC machines (VMC / Turning / HMC / VTM) as per instructions. * Load and unload components safely into fixtures. * Follow setup provided by the Setter and run production as per cycle time. * Perform in-process inspection using Vernier, Micrometer, Bore Gauge, and other measuring instruments. * Maintain production log sheets and records. * Ensure machines, tools, and workplace are clean and in good condition. * Follow safety guidelines and report any abnormality to the Setter / Supervisor. *Requirements* * ITI / Diploma / Any technical qualification. * *1–3 years of experience* in CNC machine operation (VMC / Turning / HMC / VTM). * Basic knowledge of engineering drawings and measuring instruments. * Ability to work in shifts and handle repetitive production work. * Freshers with good technical knowledge may also apply. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹35,000.00 per month Benefits: Cell phone reimbursement Provident Fund Work Location: In person
We are hiring *CNC Machine Operators* to run and operate *VMC, Turning, HMC, and VTM machines*. The candidate will be responsible for operating the machines, maintaining quality, and supporting the production team. *Key Responsibilities* * Operate CNC machines (VMC / Turning / HMC / VTM) as per instructions. * Load and unload components safely into fixtures. * Follow setup provided by the Setter and run production as per cycle time. * Perform in-process inspection using Vernier, Micrometer, Bore Gauge, and other measuring instruments. * Maintain production log sheets and records. * Ensure machines, tools, and workplace are clean and in good condition. * Follow safety guidelines and report any abnormality to the Setter / Supervisor. *Requirements* * ITI / Diploma / Any technical qualification. * *1–3 years of experience* in CNC machine operation (VMC / Turning / HMC / VTM). * Basic knowledge of engineering drawings and measuring instruments. * Ability to work in shifts and handle repetitive production work. * Freshers with good technical knowledge may also apply. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹35,000.00 per month Benefits: Cell phone reimbursement Provident Fund Work Location: In person
Job Summary: The HMC Setter is responsible for setting up and preparing Horizontal Machining Centers (HMCs) for production operations according to machining programs, component drawings, and process plans. The role involves ensuring dimensional accuracy, machine efficiency, and adherence to quality standards throughout machining operations. Key Responsibilities: Set up Horizontal Machining Centers (HMCs) as per job requirements, drawings, and CNC programs. Load tools, fixtures, and workpieces; ensure proper alignment and zero setting. Verify program correctness and perform trial runs before full-scale production. Inspect the first-off component to confirm dimensional accuracy using measuring instruments (vernier, micrometer, bore gauge, height gauge, etc.). Make minor offset adjustments and ensure machining within specified tolerances. Coordinate with the programmer and quality team for dimensional verification and problem resolution. Ensure tool life monitoring and replace worn-out tools when required. Follow process sheets, job cards, and quality plans strictly during production. Maintain daily production and inspection records. Ensure machine cleanliness, lubrication, and proper maintenance as per schedule. Adhere to all safety and 5S standards on the shop floor. Support continuous improvement, productivity enhancement, and waste reduction activities. Qualifications & Skills: ITI / Diploma in Mechanical, Production, or Tool & Die Engineering. 2–5 years of hands-on experience as an HMC Setter in a machining or foundry-based industry. Knowledge of Fanuc / Siemens / Mitsubishi CNC controls. Ability to read and interpret engineering drawings and GD&T . Skilled in using precision measuring instruments and gauges. Familiarity with cutting tools, fixtures, and machining parameters. Basic understanding of CNC programming concepts preferred. Good coordination and communication skills. Key Attributes: Strong attention to detail and precision. Hands-on, proactive, and safety-conscious. Problem-solving mindset with focus on quality and productivity. Team player with a sense of responsibility and discipline. Willingness to work in shifts if required. Job Types: Full-time, Permanent Pay: ₹35,000.00 - ₹45,000.00 per month Work Location: In person
Job Summary: The CMM Operator is responsible for performing precise dimensional inspections of machined and cast components using a Coordinate Measuring Machine (CMM) . The role involves programming, setup, and operation of CMM equipment to ensure all parts meet engineering drawings and customer specifications. Key Responsibilities: Operate and program the Coordinate Measuring Machine (CMM) using software such as PC-DMIS / Zeiss Calypso / Mitutoyo MCOSMOS (as applicable). Inspect components (raw, machined, and final) as per drawings, CAD models, and specifications. Create, modify, and validate CMM inspection programs for new and existing components. Record and document inspection results accurately in reports and databases. Analyze inspection data and highlight any dimensional deviations or non-conformances. Coordinate with production and quality teams to resolve measurement-related issues. Maintain calibration and cleanliness of the CMM equipment and related gauges. Support First Article Inspection (FAI), PPAP, and customer approval activities. Assist in training team members on CMM handling and measurement best practices. Follow all safety, quality, and 5S standards on the shop floor. Qualifications & Skills: Diploma / ITI / B.E. in Mechanical, Production, or Tool Engineering. 1–5 years of hands-on experience operating CMM machines in a manufacturing environment. Proficiency in CMM software (e.g., PC-DMIS, Calypso, MCOSMOS, or equivalent). Strong understanding of engineering drawings, GD&T, and tolerances . Experience with measurement instruments such as vernier calipers, micrometers, and height gauges. Knowledge of ISO 9001 and quality documentation practices. Good communication and analytical skills. Key Attributes: Strong attention to detail and precision. Analytical and methodical approach to problem-solving. Commitment to maintaining high quality and accuracy standards. Ability to work independently and in a team environment. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹35,000.00 per month Work Location: In person
Job Summary: The CMM Programmer is responsible for developing, validating, and maintaining CMM programs used for precise dimensional inspection of machined and cast components. The role requires expertise in CMM programming software, GD&T interpretation, and 3D model analysis to ensure that all parts meet customer and engineering requirements with the highest accuracy. Key Responsibilities: Create, modify, and optimize CMM programs using software such as PC-DMIS, Zeiss Calypso, Mitutoyo MCOSMOS , or equivalent. Perform first article, in-process, and final inspections using CMM and conventional instruments. Analyze 2D drawings and 3D CAD models to define appropriate inspection strategies and probing paths. Generate and maintain detailed inspection reports, deviation reports, and PPAP documentation . Ensure CMM inspection programs are standardized and stored with proper version control. Validate programs by performing trial runs and verifying results with reference standards. Collaborate with production, machining, and design teams to resolve dimensional and tolerance-related issues. Support fixture validation , layout inspection, and reverse engineering as needed. Monitor calibration status of measuring instruments and maintain equipment in proper condition. Train and guide CMM operators on running programs and interpreting results. Adhere to ISO, IATF, and customer-specific quality requirements. Qualifications & Skills: Diploma / B.E. / B.Tech in Mechanical, Production, or Tool Engineering. 2–6 years of hands-on experience in CMM programming and inspection . Proficiency in at least one CMM software (e.g., PC-DMIS, Calypso, MCOSMOS). Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) and engineering drawings. Experience in inspection of castings, machined parts, or tooling components. Familiarity with 3D CAD models (SolidWorks, CATIA, or AutoCAD). Good analytical, problem-solving, and documentation skills. Exposure to ISO 9001 / IATF 16949 quality systems preferred. Key Attributes: High attention to detail and precision measurement. Strong analytical thinking and technical problem-solving. Ability to work independently and in collaboration with cross-functional teams. Commitment to quality, accuracy, and continuous improvement. Job Types: Full-time, Permanent Pay: ₹40,000.00 - ₹50,000.00 per month Work Location: In person
Job Summary: The General Manager – Quality is responsible for leading and overseeing the entire quality function across all manufacturing operations, including incoming, in-process, and final inspection. The role ensures that all products consistently meet customer, statutory, and internal quality standards. The GM–Quality drives a culture of continuous improvement, zero defects, and customer satisfaction throughout the organization. Key Responsibilities:Strategic & Leadership: Define, implement, and maintain the organization’s Quality Management System (QMS) in line with ISO/IATF standards. Lead the quality team to achieve zero-defect manufacturing and high customer satisfaction. Establish and monitor quality KPIs (rejection rate, rework, customer complaints, etc.). Develop and implement quality strategies and policies aligned with business goals. Lead customer and third-party audits; ensure compliance with all relevant quality standards. Drive initiatives for continual improvement , process control, and cost reduction. Mentor and develop quality engineers, inspectors, and technicians. Operational: Oversee incoming, in-process, and final inspection activities to ensure product conformity. Review and approve control plans, inspection plans, and process validation documents . Ensure robust implementation of root cause analysis (RCA) and corrective/preventive actions (CAPA) for non-conformances. Coordinate with production, design, and maintenance teams for quality improvement and problem resolution. Manage calibration of all measuring instruments, gauges, and CMMs. Ensure traceability and documentation for all quality records, test reports, and certifications. Lead supplier quality management activities including supplier audits and material approval. Monitor and respond to customer complaints and feedback , ensuring timely resolution and preventive measures. Implement and promote 5S, Kaizen, SPC, and Lean manufacturing practices within the quality function. Qualifications & Skills: B.E. / B.Tech in Mechanical, Production, Metallurgical, or Industrial Engineering (Master’s degree preferred). 10+ years of experience in quality management, including at least 5 years in a senior leadership role in foundry, machining, or automotive components manufacturing . In-depth knowledge of ISO 9001, IATF 16949, and customer-specific requirements . Strong understanding of casting, machining, and metallurgical processes . Expertise in GD&T, CMM inspection, SPC, PPAP, APQP, FMEA, and MSA . Proven track record in leading audits and achieving customer approvals. Excellent analytical, problem-solving, and leadership skills. Strong communication and interpersonal abilities. Proficiency in MS Office, ERP systems, and quality data analysis tools. Key Attributes: Strategic thinker with hands-on leadership approach. High commitment to quality excellence and continuous improvement. Strong decision-making ability under pressure. Excellent team management and mentoring capability. Customer-focused, proactive, and process-driven mindset. Job Types: Full-time, Permanent Pay: ₹40,000.00 - ₹50,000.00 per month Work Location: In person
Job Summary: The Production Engineer is responsible for planning, coordinating, and controlling all manufacturing processes to ensure that production targets are achieved efficiently, on time, and within quality and cost standards. The role involves optimizing resources, maintaining process quality, and supporting continuous improvement initiatives across the plant. Key Responsibilities: Plan and execute daily production activities to meet customer and dispatch schedules. Monitor production processes and ensure adherence to standard operating procedures (SOPs). Coordinate with design, quality, and maintenance departments for smooth workflow and timely problem resolution. Optimize manpower, machine, and material utilization to improve productivity. Identify process bottlenecks and implement corrective actions to minimize downtime and rework. Ensure all production data is recorded accurately and reported in ERP / JobBoss or other systems. Support the introduction of new products, tooling, and process improvements. Maintain shop floor discipline, safety, and housekeeping (5S compliance). Collaborate with the quality team to ensure parts meet customer specifications and quality standards. Drive cost reduction initiatives and participate in Kaizen and continuous improvement programs. Support preventive maintenance activities for machines and tools. Qualifications & Skills: Diploma / B.E. / B.Tech in Mechanical, Production, or Industrial Engineering. 2–3 years of experience in a production environment (preferably in a foundry, machining, or fabrication setup). Strong understanding of manufacturing processes, process flow, and production planning. Familiarity with quality tools (5S, Lean, Kaizen, TPM, etc.). Ability to read and interpret engineering drawings. Good communication and leadership skills. Proficiency in MS Office and ERP systems (e.g., JobBoss or similar). Knowledge of safety standards and best practices in production operations. Key Attributes: Hands-on, proactive, and result-oriented approach. Strong problem-solving and analytical skills. Ability to manage teams and coordinate across departments. Focused on productivity, quality, and on-time delivery. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹35,000.00 per month Work Location: In person
Job Summary: The Quality Control Engineer is responsible for ensuring that all products and processes meet the company’s quality standards and customer specifications. This role involves conducting inspections, analyzing data, identifying defects or nonconformities, and implementing corrective actions to maintain consistent quality throughout the production cycle. Key Responsibilities: Inspect incoming raw materials, in-process components, and finished products as per drawings and specifications. Conduct dimensional and visual inspections using gauges, micrometers, calipers, and CMM (if applicable). Prepare and maintain inspection reports, test records, and quality documentation. Ensure adherence to quality standards such as ISO 9001 and customer-specific requirements. Identify, record, and report non-conformities; assist in root cause analysis and corrective/preventive actions (CAPA). Work closely with the production and maintenance teams to address quality issues on the shop floor. Support process audits, internal audits, and supplier quality evaluations. Monitor calibration of measuring instruments and maintain traceability records. Participate in continuous improvement activities and implement quality control techniques such as 5S, Kaizen, and SPC. Communicate effectively with customers and internal teams regarding quality-related matters. Qualifications & Skills: Diploma / B.E. / B.Tech in Mechanical, Production, or Metallurgical Engineering. 1–5 years of experience in Quality Control / Quality Assurance (preferably in a manufacturing or foundry setup). Strong knowledge of engineering drawings, GD&T, and material standards. Hands-on experience with inspection tools and measuring instruments. Familiarity with ISO documentation and quality management systems. Good analytical, problem-solving, and communication skills. Proficiency in MS Office, ERP/JobBoss, or similar software preferred. Key Attributes: Attention to detail and commitment to accuracy. Strong teamwork and coordination skills. Positive attitude with a focus on continuous improvement. Ability to handle pressure and meet deadlines. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹35,000.00 per month Benefits: Provident Fund Work Location: In person
Job Summary: The HMC Setter is responsible for setting up and preparing Horizontal Machining Centers (HMCs) for production operations according to machining programs, component drawings, and process plans. The role involves ensuring dimensional accuracy, machine efficiency, and adherence to quality standards throughout machining operations. Key Responsibilities: Set up Horizontal Machining Centers (HMCs) as per job requirements, drawings, and CNC programs. Load tools, fixtures, and workpieces; ensure proper alignment and zero setting. Verify program correctness and perform trial runs before full-scale production. Inspect the first-off component to confirm dimensional accuracy using measuring instruments (vernier, micrometer, bore gauge, height gauge, etc.). Make minor offset adjustments and ensure machining within specified tolerances. Coordinate with the programmer and quality team for dimensional verification and problem resolution. Ensure tool life monitoring and replace worn-out tools when required. Follow process sheets, job cards, and quality plans strictly during production. Maintain daily production and inspection records. Ensure machine cleanliness, lubrication, and proper maintenance as per schedule. Adhere to all safety and 5S standards on the shop floor. Support continuous improvement, productivity enhancement, and waste reduction activities. Qualifications & Skills: ITI / Diploma in Mechanical, Production, or Tool & Die Engineering. 2–5 years of hands-on experience as an HMC Setter in a machining or foundry-based industry. Knowledge of Fanuc / Siemens / Mitsubishi CNC controls. Ability to read and interpret engineering drawings and GD&T . Skilled in using precision measuring instruments and gauges. Familiarity with cutting tools, fixtures, and machining parameters. Basic understanding of CNC programming concepts preferred. Good coordination and communication skills. Key Attributes: Strong attention to detail and precision. Hands-on, proactive, and safety-conscious. Problem-solving mindset with focus on quality and productivity. Team player with a sense of responsibility and discipline. Willingness to work in shifts if required. Job Types: Full-time, Permanent Pay: ₹35,000.00 - ₹45,000.00 per month Work Location: In person
Job Summary: The CMM Operator is responsible for performing precise dimensional inspections of machined and cast components using a Coordinate Measuring Machine (CMM) . The role involves programming, setup, and operation of CMM equipment to ensure all parts meet engineering drawings and customer specifications. Key Responsibilities: Operate and program the Coordinate Measuring Machine (CMM) using software such as PC-DMIS / Zeiss Calypso / Mitutoyo MCOSMOS (as applicable). Inspect components (raw, machined, and final) as per drawings, CAD models, and specifications. Create, modify, and validate CMM inspection programs for new and existing components. Record and document inspection results accurately in reports and databases. Analyze inspection data and highlight any dimensional deviations or non-conformances. Coordinate with production and quality teams to resolve measurement-related issues. Maintain calibration and cleanliness of the CMM equipment and related gauges. Support First Article Inspection (FAI), PPAP, and customer approval activities. Assist in training team members on CMM handling and measurement best practices. Follow all safety, quality, and 5S standards on the shop floor. Qualifications & Skills: Diploma / ITI / B.E. in Mechanical, Production, or Tool Engineering. 1–5 years of hands-on experience operating CMM machines in a manufacturing environment. Proficiency in CMM software (e.g., PC-DMIS, Calypso, MCOSMOS, or equivalent). Strong understanding of engineering drawings, GD&T, and tolerances . Experience with measurement instruments such as vernier calipers, micrometers, and height gauges. Knowledge of ISO 9001 and quality documentation practices. Good communication and analytical skills. Key Attributes: Strong attention to detail and precision. Analytical and methodical approach to problem-solving. Commitment to maintaining high quality and accuracy standards. Ability to work independently and in a team environment. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹35,000.00 per month Work Location: In person
Job Summary: The CMM Programmer is responsible for developing, validating, and maintaining CMM programs used for precise dimensional inspection of machined and cast components. The role requires expertise in CMM programming software, GD&T interpretation, and 3D model analysis to ensure that all parts meet customer and engineering requirements with the highest accuracy. Key Responsibilities: Create, modify, and optimize CMM programs using software such as PC-DMIS, Zeiss Calypso, Mitutoyo MCOSMOS , or equivalent. Perform first article, in-process, and final inspections using CMM and conventional instruments. Analyze 2D drawings and 3D CAD models to define appropriate inspection strategies and probing paths. Generate and maintain detailed inspection reports, deviation reports, and PPAP documentation . Ensure CMM inspection programs are standardized and stored with proper version control. Validate programs by performing trial runs and verifying results with reference standards. Collaborate with production, machining, and design teams to resolve dimensional and tolerance-related issues. Support fixture validation , layout inspection, and reverse engineering as needed. Monitor calibration status of measuring instruments and maintain equipment in proper condition. Train and guide CMM operators on running programs and interpreting results. Adhere to ISO, IATF, and customer-specific quality requirements. Qualifications & Skills: Diploma / B.E. / B.Tech in Mechanical, Production, or Tool Engineering. 2–6 years of hands-on experience in CMM programming and inspection . Proficiency in at least one CMM software (e.g., PC-DMIS, Calypso, MCOSMOS). Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) and engineering drawings. Experience in inspection of castings, machined parts, or tooling components. Familiarity with 3D CAD models (SolidWorks, CATIA, or AutoCAD). Good analytical, problem-solving, and documentation skills. Exposure to ISO 9001 / IATF 16949 quality systems preferred. Key Attributes: High attention to detail and precision measurement. Strong analytical thinking and technical problem-solving. Ability to work independently and in collaboration with cross-functional teams. Commitment to quality, accuracy, and continuous improvement. Job Types: Full-time, Permanent Pay: ₹40,000.00 - ₹50,000.00 per month Work Location: In person
Job Summary The Junior Accounts Executive will support the finance and accounts department in maintaining accurate financial records, handling daily accounting tasks, and assisting in statutory compliance. The role requires strong attention to detail and knowledge of accounting principles. Key Responsibilities Maintain day-to-day accounting records including purchase, sales, payments, and receipts entries. Prepare and handle invoices, debit/credit notes, and related documentation. Assist in reconciliation of bank statements, vendor/customer accounts, and ledger scrutiny. Support month-end closing activities and preparation of MIS reports. Assist in GST compliance: data preparation, filing support, and documentation. Support TDS workings and filing processes. Coordinate with internal departments for accounting data and documents. Manage petty cash and ensure proper documentation. Maintain records for audits and assist auditors when required. Ensure compliance with company accounting policies and statutory guidelines. Skills & Requirements Bachelor’s degree in Commerce (B.Com / M.Com) or equivalent. 0 to 2 years of accounting experience (Freshers with good academic knowledge may apply). Knowledge of GST/TDS and Indian accounting standards preferred. Experience using accounting software (e.g., Tally ERP/Prime, ERP, SAP). Proficient in MS Excel & basic analytical skills. Good communication and coordination abilities. Strong sense of responsibility, accuracy, and confidentiality. Personal Attributes Positive attitude and willingness to learn. Good time management and deadline-oriented. Team player with problem-solving mindset. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Provident Fund Work Location: In person
Job Summary The Junior Accounts Executive will support the finance and accounts department in maintaining accurate financial records, handling daily accounting tasks, and assisting in statutory compliance. The role requires strong attention to detail and knowledge of accounting principles. Key Responsibilities Maintain day-to-day accounting records including purchase, sales, payments, and receipts entries. Prepare and handle invoices, debit/credit notes, and related documentation. Assist in reconciliation of bank statements, vendor/customer accounts, and ledger scrutiny. Support month-end closing activities and preparation of MIS reports. Assist in GST compliance: data preparation, filing support, and documentation. Support TDS workings and filing processes. Coordinate with internal departments for accounting data and documents. Manage petty cash and ensure proper documentation. Maintain records for audits and assist auditors when required. Ensure compliance with company accounting policies and statutory guidelines. Skills & Requirements Bachelor’s degree in Commerce (B.Com / M.Com) or equivalent. 0 to 2 years of accounting experience (Freshers with good academic knowledge may apply). Knowledge of GST/TDS and Indian accounting standards preferred. Experience using accounting software (e.g., Tally ERP/Prime, ERP, SAP). Proficient in MS Excel & basic analytical skills. Good communication and coordination abilities. Strong sense of responsibility, accuracy, and confidentiality. Personal Attributes Positive attitude and willingness to learn. Good time management and deadline-oriented. Team player with problem-solving mindset. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Provident Fund Work Location: In person
Job Summary The Mastercam/Design Engineer will be responsible for CNC programming, machining process planning, and developing machining models from casting drawings. The role requires strong knowledge of Mastercam software, machining operations, CNC tooling, and foundry-related dimensional considerations. Key Responsibilities Develop CNC machining programs using Mastercam for milling & turning operations. Prepare machining models considering casting allowances, machining stock, draft angles, and shrinkage factors. Review and interpret 2D/3D customer drawings & GD&T requirements. Perform CAM simulation to validate program accuracy and toolpath optimization. Design fixtures, jigs, and tooling required for machining operations. Create detailed machining process sheets and setup instructions. Optimize toolpath, feeds & speeds to reduce machining cycle time. Collaborate with the machining shop to ensure smooth program implementation. Address machining issues and modify programs as required for quality improvement. Work closely with foundry/casting team to ensure dimensional feasibility and machining ease. Maintain program database and revision control according to internal standards. Skills & Technical Requirements Diploma/Degree in Mechanical Engineering or equivalent. 2–4 years of experience in CNC Programming / CAM Design. Strong working knowledge of Mastercam (mandatory). Understanding of casting processes (sand casting, machining allowances, datum selection). Hands-on knowledge of CNC machining, tooling & fixture design. Experience with GD&T and tolerance stack-ups. Proficient in 3D CAD software like SolidWorks / Creo / UG NX (any) Problem-solving and root-cause analysis skills (machining accuracy & quality issues). Good communication and coordination ability with internal teams. Personal Attributes Detail-oriented with a strong technical mindset. Ability to work independently & meet production deadlines. Team player with positive attitude and continuous learning approach. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹45,000.00 per month Benefits: Cell phone reimbursement Provident Fund Work Location: In person
The Sales & Marketing Executive will be responsible for business development, customer management, and sales growth for cast iron and SG iron castings. The role involves coordinating with internal teams to ensure customer satisfaction, on-time delivery, and repeat business. Key ResponsibilitiesSales & Business Development Develop new customers for Cast Iron and SG Iron castings across automotive, industrial, pump, valve, and infrastructure sectors. Manage and grow existing customer accounts. Prepare and submit quotations, costings, and technical-commercial proposals. Follow up on enquiries, RFQs, and purchase orders. Achieve assigned monthly and annual sales targets. Customer Coordination Act as the primary contact for customers regarding orders, deliveries, quality concerns, and technical clarifications. Coordinate with production, planning, quality, and logistics teams to ensure on-time delivery (OTD) . Handle customer complaints and support corrective and preventive actions (CAPA). Marketing & Market Intelligence Conduct market research to identify new business opportunities and industry trends. Monitor competitor activities, pricing trends, and market demands. Participate in customer audits, technical meetings, and exhibitions as required. Reports to be Prepared Daily Customer Visit / Interaction Report Enquiry & Quotation Status Report Monthly Sales Performance Report OTD (On-Time Delivery) Coordination Report Customer Feedback & Complaint Report Market Development & New Lead Generation Report Qualifications & Experience Diploma / Degree in Mechanical / Metallurgical Engineering or related field. 2–8 years of experience in sales & marketing of cast iron / SG iron castings (preferred). Ability to understand drawings, specifications, grades, and foundry processes. Strong communication, negotiation, and presentation skills. Proficiency in MS Office and CRM tools. Preferred Skills Experience handling OEMs and Tier-1 customers. Knowledge of foundry quality systems, PPAP, and customer audits. Strong customer relationship management and coordination skills. Willingness to travel for customer visits and business development. Job Types: Full-time, Part-time, Permanent Pay: ₹20,000.00 - ₹28,000.00 per month Benefits: Cell phone reimbursement Provident Fund Work Location: In person
The Sales & Marketing Executive will be responsible for business development, customer management, and sales growth for cast iron and SG iron castings. The role involves coordinating with internal teams to ensure customer satisfaction, on-time delivery, and repeat business. Key ResponsibilitiesSales & Business Development Develop new customers for Cast Iron and SG Iron castings across automotive, industrial, pump, valve, and infrastructure sectors. Manage and grow existing customer accounts. Prepare and submit quotations, costings, and technical-commercial proposals. Follow up on enquiries, RFQs, and purchase orders. Achieve assigned monthly and annual sales targets. Customer Coordination Act as the primary contact for customers regarding orders, deliveries, quality concerns, and technical clarifications. Coordinate with production, planning, quality, and logistics teams to ensure on-time delivery (OTD) . Handle customer complaints and support corrective and preventive actions (CAPA). Marketing & Market Intelligence Conduct market research to identify new business opportunities and industry trends. Monitor competitor activities, pricing trends, and market demands. Participate in customer audits, technical meetings, and exhibitions as required. Reports to be Prepared Daily Customer Visit / Interaction Report Enquiry & Quotation Status Report Monthly Sales Performance Report OTD (On-Time Delivery) Coordination Report Customer Feedback & Complaint Report Market Development & New Lead Generation Report Qualifications & Experience Diploma / Degree in Mechanical / Metallurgical Engineering or related field. 2–8 years of experience in sales & marketing of cast iron / SG iron castings (preferred). Ability to understand drawings, specifications, grades, and foundry processes. Strong communication, negotiation, and presentation skills. Proficiency in MS Office and CRM tools. Preferred Skills Experience handling OEMs and Tier-1 customers. Knowledge of foundry quality systems, PPAP, and customer audits. Strong customer relationship management and coordination skills. Willingness to travel for customer visits and business development. Job Types: Full-time, Part-time, Permanent Pay: ₹20,000.00 - ₹28,000.00 per month Benefits: Cell phone reimbursement Provident Fund Work Location: In person