Key Responsibilities: Assist in daily production planning based on available resources, manpower, and raw materials. Coordinate with stores, maintenance, and quality departments to ensure uninterrupted production flow. Monitor daily production activities and ensure execution as per defined schedules and targets. Analyze production output and suggest improvements to minimize downtime and enhance productivity. Maintain production logs, reports, and shift summaries with accurate and timely entries. Identify process bottlenecks and recommend corrective actions in coordination with the team. Ensure compliance with standard operating procedures (SOPs), safety norms, and quality parameters. Support the implementation of lean manufacturing practices and 5S methodology on the shop floor. Act as a key link between planning and shop floor teams for real-time updates and issue resolution. Qualifications & Skills: Diploma in Mechanical Engineering (DME) is mandatory. 1–3 years of experience in production or manufacturing operations preferred. Good understanding of manufacturing processes, machines, and tools. Proficient in MS Office and basic ERP software (preferred). Strong coordination, communication, and problem-solving skills. Ability to work in a team environment and handle pressure of production timelines. Job Types: Full-time, Permanent Pay: ₹16,000.00 - ₹24,000.00 per month Benefits: Internet reimbursement Leave encashment Provident Fund Schedule: Day shift Morning shift Supplemental Pay: Overtime pay Yearly bonus Work Location: In person
Key Responsibilities: Assist in daily production planning based on available resources, manpower, and raw materials. Coordinate with stores, maintenance, and quality departments to ensure uninterrupted production flow. Monitor daily production activities and ensure execution as per defined schedules and targets. Analyze production output and suggest improvements to minimize downtime and enhance productivity. Maintain production logs, reports, and shift summaries with accurate and timely entries. Identify process bottlenecks and recommend corrective actions in coordination with the team. Ensure compliance with standard operating procedures (SOPs), safety norms, and quality parameters. Support the implementation of lean manufacturing practices and 5S methodology on the shop floor. Act as a key link between planning and shop floor teams for real-time updates and issue resolution. Qualifications & Skills: Diploma in Mechanical Engineering (DME) is mandatory. 1–3 years of experience in production or manufacturing operations preferred. Good understanding of manufacturing processes, machines, and tools. Proficient in MS Office and basic ERP software (preferred). Strong coordination, communication, and problem-solving skills. Ability to work in a team environment and handle pressure of production timelines. Job Types: Full-time, Permanent Pay: ₹16,000.00 - ₹24,000.00 per month Benefits: Internet reimbursement Leave encashment Provident Fund Schedule: Day shift Morning shift Supplemental Pay: Overtime pay Yearly bonus Work Location: In person
Key Responsibilities: Develop and modify CNC programs for plasma cutting based on engineering drawings and design specifications. Operate CNC plasma cutting machines to cut metal parts accurately. Interpret technical drawings, blueprints, and CAD files to plan cutting sequences. Select proper cutting tools, gases, and machine settings for different materials and thicknesses. Load and unload metal sheets/plates safely and efficiently. Inspect finished products for quality, precision, and adherence to specifications. Perform routine machine maintenance and troubleshoot mechanical or programming issues. Maintain documentation of programs, production output, and machine logs. Coordinate with production and quality teams to meet delivery timelines. Adhere to all safety procedures and company standards. Qualifications and Skills: ITI / Diploma / Certification in Mechanical, Fabrication, or CNC Operation. Minimum 2–4 years of experience in CNC Plasma Cutting (programming and operation). Proficiency in CNC programming software such as AutoCAD, FastCAM, or similar. Strong knowledge of metals and cutting parameters for MS, SS, and aluminum sheets/plates. Ability to read and interpret mechanical drawings and CAD files. Hands-on experience with CNC machine maintenance and troubleshooting. Attention to detail and strong quality orientation. Physically fit and able to handle material manually if needed. Job Types: Full-time, Permanent Pay: ₹16,000.00 - ₹32,000.00 per month Benefits: Internet reimbursement Leave encashment Provident Fund Schedule: Day shift Morning shift Night shift Rotational shift Supplemental Pay: Overtime pay Yearly bonus Work Location: In person
Job Title: Boiler Operator Company: Hi-Tech Elastomers Ltd. Location: Rakanpur, Near Nilkanth Hotel, Kalol, Gandhinagar – 382721 Industry: Rubber Manufacturing Employment Type: Full-time / Permanent Job Summary: Hi-Tech Elastomers Ltd is seeking a skilled and safety-conscious Boiler Operator to manage and operate industrial boilers and related equipment in our rubber manufacturing facility. The ideal candidate should have hands-on experience in maintaining steam generation systems, ensuring smooth plant operations, and complying with all safety and statutory requirements. Key Responsibilities: Operate, monitor, and maintain steam boilers and associated systems. Perform routine checks of pressure, temperature, water level, and fuel levels. Maintain proper records/logbooks of operations, maintenance, and inspections. Ensure compliance with safety regulations and statutory boiler operation requirements. Carry out preventive and corrective maintenance of boiler and auxiliaries. Identify and troubleshoot faults or issues with boiler systems. Coordinate with the production and maintenance teams to ensure uninterrupted steam supply. Ensure optimal and energy-efficient operation of the boiler systems. Handle emergency shutdowns and follow proper safety protocols. Qualifications and Experience: Must hold a valid Boiler Attendant Certificate (1st Class / 2nd Class) as per statutory norms. Minimum 3–5 years of experience in boiler operation in a manufacturing or rubber industry preferred. ITI / Diploma in Mechanical or relevant technical field is desirable. Familiarity with rubber industry operations will be an added advantage. Skills Required: Good knowledge of boiler controls, safety devices, and emergency procedures. Ability to read and interpret technical documents, pressure readings, and gauges. Strong problem-solving and troubleshooting skills. Basic knowledge of mechanical and electrical maintenance. Awareness of environmental and safety standards (e.g., IBR norms, pollution control). Work Conditions: Working in hot and humid conditions near the boiler room. Shift-based duty, including night shifts as per plant requirement. Benefits: Competitive salary as per industry standards. Statutory benefits including PF, ESIC, gratuity, and bonus. Uniform and safety gear provided by the company. Growth and training opportunities within the company Job Types: Full-time, Permanent Pay: ₹17,000.00 - ₹22,000.00 per month Benefits: Internet reimbursement Leave encashment Provident Fund Schedule: Day shift Morning shift Night shift Rotational shift Supplemental Pay: Overtime pay Yearly bonus Work Location: In person
Job Title: Boiler Operator Company: Hi-Tech Elastomers Ltd. Location: Rakanpur, Near Nilkanth Hotel, Kalol, Gandhinagar – 382721 Industry: Rubber Manufacturing Employment Type: Full-time / Permanent Job Summary: Hi-Tech Elastomers Ltd is seeking a skilled and safety-conscious Boiler Operator to manage and operate industrial boilers and related equipment in our rubber manufacturing facility. The ideal candidate should have hands-on experience in maintaining steam generation systems, ensuring smooth plant operations, and complying with all safety and statutory requirements. Key Responsibilities: Operate, monitor, and maintain steam boilers and associated systems. Perform routine checks of pressure, temperature, water level, and fuel levels. Maintain proper records/logbooks of operations, maintenance, and inspections. Ensure compliance with safety regulations and statutory boiler operation requirements. Carry out preventive and corrective maintenance of boiler and auxiliaries. Identify and troubleshoot faults or issues with boiler systems. Coordinate with the production and maintenance teams to ensure uninterrupted steam supply. Ensure optimal and energy-efficient operation of the boiler systems. Handle emergency shutdowns and follow proper safety protocols. Qualifications and Experience: Must hold a valid Boiler Attendant Certificate (1st Class / 2nd Class) as per statutory norms. Minimum 3–5 years of experience in boiler operation in a manufacturing or rubber industry preferred. ITI / Diploma in Mechanical or relevant technical field is desirable. Familiarity with rubber industry operations will be an added advantage. Skills Required: Good knowledge of boiler controls, safety devices, and emergency procedures. Ability to read and interpret technical documents, pressure readings, and gauges. Strong problem-solving and troubleshooting skills. Basic knowledge of mechanical and electrical maintenance. Awareness of environmental and safety standards (e.g., IBR norms, pollution control). Work Conditions: Working in hot and humid conditions near the boiler room. Shift-based duty, including night shifts as per plant requirement. Benefits: Competitive salary as per industry standards. Statutory benefits including PF, ESIC, gratuity, and bonus. Uniform and safety gear provided by the company. Growth and training opportunities within the company Job Types: Full-time, Permanent Pay: ₹17,000.00 - ₹22,000.00 per month Benefits: Internet reimbursement Leave encashment Provident Fund Schedule: Day shift Morning shift Night shift Rotational shift Supplemental Pay: Overtime pay Yearly bonus Work Location: In person
As a Mechanical Design Engineer with 12 years of experience, you will be responsible for creating 3D models and 2D detailed drawings using CAD software such as SolidWorks, AutoCAD, Creo, or similar. Your role will involve assisting in the design and development of mechanical components and assemblies, conducting tolerance analysis, and collaborating with cross-functional teams to bring innovative projects from concept to production. Your responsibilities will include participating in prototype development, testing, and design validation activities, supporting design changes and revisions, and ensuring adherence to design standards and best practices throughout the design lifecycle. You will contribute to the continuous improvement of products and design processes, utilizing your proficiency in CAD software and knowledge of engineering fundamentals. To excel in this role, you should hold a Bachelor's degree in Mechanical Engineering or a related field, along with 12 years of relevant work experience in mechanical design or product development. Your familiarity with manufacturing processes, basic knowledge of GD&T, DFM/DFA, and mechanical systems, as well as good problem-solving, analytical, and communication skills will be essential for success. While not mandatory, experience with FEA or simulation tools, exposure to PLM systems like Windchill or Teamcenter, and basic knowledge of ISO/ASME design standards would be advantageous. In return, we offer you the opportunity to work on innovative projects in a collaborative and growth-focused work environment, along with training and development programs, competitive compensation, and a comprehensive benefits package including health insurance, leave encashment, paid sick time, and provident fund. If you are looking for a challenging yet rewarding career as a Mechanical Design Engineer, we encourage you to apply and be part of our dynamic team dedicated to driving excellence in product design and development. (Note: This is a full-time, permanent position with day shift and morning shift schedules, along with performance bonuses and yearly bonuses. The work location is in person.),
Job Title: Mechanical Design Engineer (1–2 Years Experience) Location: [Insert Location] Department: Engineering / R&D Employment Type: Full-time Experience Required: 1–2 years Job Summary: We are seeking a passionate and detail-oriented Mechanical Design Engineer with 1–2 years of hands-on experience in product design and development. The ideal candidate should be proficient in CAD software, understand engineering fundamentals, and be eager to contribute to innovative projects from concept to production. Key Responsibilities: Create 3D models and 2D detailed drawings using CAD software (SolidWorks, AutoCAD, Creo, or similar). Assist in the design and development of mechanical components and assemblies. Conduct tolerance analysis and material selection based on project requirements. Collaborate with cross-functional teams including electrical, manufacturing, and quality departments. Participate in prototype development, testing, and design validation activities. Support design changes, revisions, and documentation control processes. Follow design standards, best practices, and company procedures throughout the design lifecycle. Contribute to continuous improvement of products and design processes. Requirements: Bachelor’s degree in Mechanical Engineering or a related field. 1–2 years of relevant work experience in mechanical design or product development. Proficiency in CAD software (e.g., SolidWorks, AutoCAD, Creo, CATIA, or similar). Basic knowledge of GD&T, DFM/DFA, and mechanical systems. Familiarity with manufacturing processes such as machining, sheet metal, injection molding, etc. Good problem-solving, analytical, and communication skills. Ability to work independently as well as part of a team. Nice to Have (Optional): Experience with FEA or simulation tools. Exposure to PLM systems (e.g., Windchill, Teamcenter). Basic knowledge of ISO/ASME design standards. What We Offer: Opportunity to work on innovative projects. Collaborative and growth-focused work environment. Training and development programs. Competitive compensation and benefits package. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Health insurance Leave encashment Paid sick time Provident Fund Work Location: In person
Job Summary: We are seeking a detail-oriented and experienced Blasting & Painting Production Engineer to oversee surface preparation and coating activities in line with project specifications and industry standards. The ideal candidate will ensure all blasting and painting operations are performed efficiently, safely, and with high quality, contributing to the overall success of the fabrication or maintenance projects. Key Responsibilities: Plan, coordinate, and supervise blasting and painting production activities as per project schedules. Ensure compliance with client specifications, international standards (e.g., SSPC, NACE, ISO), and safety regulations. Prepare work method statements, inspection & test plans (ITP), and process documentation. Monitor surface preparation quality including cleanliness, anchor profile, and environmental conditions. Oversee the application of paints/coatings (airless spray, brush, roller) and ensure proper film thickness, coverage, and curing. Manage and coordinate with subcontractors, painters, blasters, and QA/QC teams. Review and maintain production records, daily reports, material consumption, and progress tracking. Conduct toolbox talks, risk assessments, and ensure safe work practices. Participate in audits, inspections, and client walk-downs. Troubleshoot issues in coating defects (blistering, peeling, overspray, etc.) and propose corrective actions. Coordinate with procurement for paint and consumables based on production needs. Qualifications: Bachelor’s Degree / Diploma in Mechanical Engineering, Industrial Engineering, or related field. Minimum [X] years of relevant experience in blasting and painting operations in shipbuilding, oil & gas, fabrication, or heavy industry. Familiarity with international coating standards such as SSPC, NACE, ISO 8501, and ASTM. Certification such as NACE Coating Inspector (Level 1/2) or equivalent is an advantage. Strong knowledge of various types of coatings, surface preparation methods, and equipment. Excellent leadership, communication, and team coordination skills. Proficient in MS Office and reporting tools. Work Environment: On-site role; may require working in shifts and outdoor/industrial environments. PPE and safety compliance required at all times. May involve travel to project locations or yards. Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹40,000.00 per month Benefits: Internet reimbursement Provident Fund Work Location: In person