Position: Environmental Consultant Experience: 15 years Job Description for the position of Environment Consultant: Preparation of Environmental and Social Impact Assessment Collaborating with senior team members in the delivery of projects in environmental impact assessment, planning and management to a high standard, ensuring client satisfaction. Greenhouse gas emissions accounting (Scopes 1,2 and 3). Planning and executing environmental field works including marine ecological survey, soil, groundwater, air and noise sampling, data management and technical reporting. To be successful in this role, you will possess : Approximately 10 – 15 years’ experience in a consulting environment with demonstrated Middle East experience. Relevant tertiary qualification e.g., Environmental Science, Environmental Engineering, Environmental Management or similar. Experience in air dispersion modelling, noise modelling & effluent dispersion modelling will be an added advantage Good knowledge of Gulf environmental regulations, including permitting requirements and experience in obtaining permits from relevant agencies will be an added advantage Demonstrated track record in the planning, coordination, and management of environmental projects. Excellent technical writing, communication, and project management skills. Must be comfortable working in the field at remote locations, or on active construction site. Experience with presenting technical information to clients, stakeholders and/or regulators. Proven business development, networking and client relationship management skills. The ability to mentor, grow and develop junior team members to continue the successful growth of the team. This is a great opportunity for you to develop your career while being part of a well-established and growing organization. Show more Show less
Job Title : Functional Safety Expert Experience : 7-10 years Roles & Responsibilities Guide junior engineers in analysing and streamlining existing alarm systems to minimize unnecessary alarms. Help with data collection and analysis for Safety Integrity Level assessments in compliance with IEC 61511 standards. Participate in risk assessments workshops as scribe for recording all workshop activities. Help prepare and maintain documentation for alarm rationalization, SIL assessments, and cybersecurity measures as instructed. Assist in generating draft reports and recommendations for system improvements and security enhancements. Stay informed about the latest industry standards and regulations related to alarm management, functional safety, and cybersecurity through training and self-study. Candidate Specification Bachelor’s Degree level qualification is preferable in Instrumentation/Electronic engineering or similar Willingness to learn and adapt to new technologies and methodologies. Strong analytical and problem-solving abilities. Flexibility to travel for meetings and site visits where necessary. Excellent communication skills and interpersonal skills with good report writing,presentation, analytical, and computer skills.
Responsibilities: Participates as a team member in a specific phase of a broad engineering assignment Directs preparation of appropriate documentation for assigned projects Undertake activities and tasks assigned by the Lead Engineer with minimal or no supervision and guidance. These will typically comprise of: Preparation, checking and approval of philosophies, specifications, design drawings, studies, requisitions, technical evaluations and general Telecom system (PAGA, CCTV, LAN, Telephone, FOC, Radio, ACS) documentation. Review, checking and approval of third-party supplier drawings and documentation for all types of Telecom equipment. Developing enquiry documentation including MR, MTOs and man-hour estimates. Co-ordination meetings and liaison with home office, clients and suppliers. Supervision, support and guidance of subordinate engineers and designers. Inspection, checking and witness testing of telecom system equipment at suppliers’ works as necessary. Engineering support during construction and commissioning phase activities. Fully coherent in all international codes and standards Participate in site visits, project review meetings, design reviews and other workshops as required Participation in design reviews, value engineering / safety workshops Ensuring technical integrity of the Telecom deliverables for the project. Ensure compliance with the work scope and with applicable international standards and various Client standards. Ensuring that telecom design activities are carried out in stipulated period of the project. Maintaining the quality of the documentation as per approved quality procedures of Company and attending spot checks, internal/external audits etc. Skills / Qualifications: Engineering Degree in a relevant discipline (Electronics and Communication, Applied Electronics) Minimum 8 years Telecom experience in oil and gas projects (Offshore/Onshore). Experience in FEED, Detail design and EPC projects Good knowledge of discipline design/engineering with sufficient experience in different discipline areas Knowledge in CCTV, PAGA and Radio Coverage Study is preferred. Communication skill (excellent command on both spoken and written English) Computer skill (Microsoft Office)
Responsibilities: Experience in BIM Software (Civil3D & Navisworks) Knowledge of CAD/BIM standards. Must have experience on the use of computer aided drafting software, such as Civil 3D and AutoCAD etc. Good knowledge of Autodesk Navisworks, with experience of clash detection/Resolution and producing clash report. Prepare electrical MV & LV cable and substation drawings. Prepare telecom drawings. Prepare street lighting drawings. Prepare CCTV drawings. Prepare single line diagram & Load Schedule Drawings. Prepare Building wiring, lighting drawings. Work closely with BIM Lead and Design Leads to ensure the project’s compliance with the given policies and processes, and to ensure timely implementation and completion Works with BIM lead, Design Leads and Engineers to develop engineering drawings consisting of basic arrangements, layouts, flow sheets, assemblies, isometrics, component details from rough sketches and/or from general engineering and design information according to established standards and procedures, and to ensure timely implementation and completion. Using BIM software and tools to coordinate design documentation. Understand BIM modeling process and able to manage all BIM related activities from project start up to project completion Review each drawing for readability, presentation and adherence to standards, in accordance to company QA/QC process Good knowledge in content creation and able to create different types of parametric and non-parametric families Good knowledge in BIM, understand LOD requirements and BIM processes. Prepare technical drafting and modeling drawings for the infrastructure (Dry Utilities) Division. Collaboration and coordination with other disciplines on design changes and model development tasks. Liaise with Project Engineers on information requirements, project progress, and any potential delays. Utilizing Civil3D and Navisworks to coordinate interference/clash detection and resolutions. Creating engineering drawings based on concepts, sketches, and requirements. Contribute to the effective functioning of the team by identifying with and contributing to the team’s objectives, communicating and sharing knowledge. Supports wet utility team. Perform other responsibilities associated with this position as may be appropriate. Skills Requirements: Diploma or degree in civil engineering Minimum 8+ years of CAD drafting experience in Dry utilities projects Software experience required : Autodesk Civil 3D Navisworks AutoCAD Common Data Environment: BIM360 (Advantage)
Responsibilities: Experience in BIM Software (Civil3D & Navisworks) Knowledge of CAD/BIM standards. Must have experience on the use of computer aided drafting software, such as Civil 3D and AutoCAD etc. Prepare Potable water, Irrigation, Sewer & Strom water drawings. Good knowledge of Autodesk Navisworks, with experience of clash detection/Resolution and producing clash report. Work closely with BIM Lead and Design Leads to ensure the project’s compliance with the given policies and processes, and to ensure timely implementation and completion Works with BIM lead, Design Leads and Engineers to develop engineering drawings consisting of basic arrangements, layouts, flow sheets, assemblies, isometrics, component details from rough sketches and/or from general engineering and design information according to established standards and procedures, and to ensure timely implementation and completion. Using BIM software and tools to coordinate design documentation. Understand BIM modeling process and able to manage all BIM related activities from project start up to project completion Review each drawing for readability, presentation and adherence to standards, in accordance to company QA/QC process Good knowledge in content creation and able to create different types of parametric and non-parametric families Good knowledge in BIM, understand LOD requirements and BIM processes. Prepare technical drafting and modeling drawings for the infrastructure (Wet Utilities) Division. Collaboration and coordination with other disciplines on design changes and model development tasks. Liaise with Project Engineers on information requirements, project progress, and any potential delays. Utilizing Civil3D and Navisworks to coordinate interference/clash detection and resolutions. Creating engineering drawings based on concepts, sketches, and requirements. Contribute to the effective functioning of the team by identifying with and contributing to the team’s objectives, communicating and sharing knowledge. Supports wet utility team. Perform other responsibilities associated with this position as may be appropriate. Skills Requirements: Diploma or degree in civil engineering Minimum 8+ years of CAD drafting experience in Wet utilities projects Software experience required : Autodesk Civil 3D Navisworks AutoCAD Common Data Environment: BIM360 (Advantage)
You should have experience in BIM Software such as Civil3D & Navisworks and possess knowledge of CAD/BIM standards. It is required to have proficiency in computer-aided drafting software like Civil 3D, AutoCAD, and Autodesk Navisworks. Experience in clash detection/resolution and producing clash reports is essential. Your responsibilities will include preparing electrical MV & LV cable, substation drawings, telecom drawings, street lighting drawings, CCTV drawings, single line diagram & Load Schedule Drawings, building wiring, and lighting drawings. You will collaborate with the BIM Lead and Design Leads to ensure projects comply with policies and processes, and ensure timely implementation and completion. Working closely with BIM lead, Design Leads, and Engineers, you will develop engineering drawings, layouts, flow sheets, assemblies, isometrics, and component details. You will coordinate design documentation using BIM software and tools, manage BIM-related activities from project start to completion, and review drawings for adherence to standards. Your role will involve content creation, creating parametric and non-parametric families, understanding LOD requirements, and BIM processes. You will also prepare technical drafting and modeling drawings for the infrastructure (Dry Utilities) Division, coordinate with other disciplines on design changes, and liaise with Project Engineers on information requirements and progress. Utilizing Civil3D and Navisworks, you will coordinate interference/clash detection and resolutions, create engineering drawings based on concepts, sketches, and requirements, and contribute to the team's objectives and knowledge sharing. Additionally, you will support the wet utility team and perform other responsibilities as required. To qualify for this role, you should have a Diploma or degree in civil engineering and a minimum of 8+ years of CAD drafting experience in Dry utilities projects. Proficiency in Autodesk Civil 3D, Navisworks, AutoCAD, and BIM360 (Advantage) is necessary to excel in this position.,
Position: BIM Coordinator Education: Bachelor’s Degree in Architecture / Civil / Mechanical Engineering Experience: Minimum 10 years in BIM Software proficiency for Industrial Buildings, must have UAE Projects Experience Roles and Responsibilities: · Responsible for managing and coordinating the implementation of BIM Process and technologies. · Develop and execute a comprehensive BIM strategy for the project. · Extract isometrics, MTOs, 3D views, Sections etc. as required by Engineering Team · Attend Client Meetings, Present Overall BIM Model · Lead BIM Model reviews, Prepare comment resolutions and ensure timely completion of BIM Model · Manage Cost, Time and Quality of BIM Models in line with project requirements · Setup and manage project inside ACC platform. · Coordinates BIM activities across multiple disciplines. · Ensures consistent model data and adherence to BIM standards. · Manages project BIM team, fosters collaboration, and ensures consistent quality in delivery. · Resolves coordination issues and facilitates communication among team members. · Manages clash detection process and ensures clashes are addressed. · Provides technical support and expertise in specialized aspects of BIM. · Contributes to project optimization through specialized skills. Skills: · Good knowledge of software – Autodesk Revit, Autodesk Navisworks Manage, Autodesk AUTOCAD, ACC(BIM360), · Good knowledge of local and international BIM standards (ISO 19650)
Location : Chennai Experience Required : 8-12 years in MEP with at least 3 years in a leadership role in isometric drafting/modelling Job Summary The Isometrics Lead is responsible for the development, review and coordination of MEP and Fire Fighting drawings especially hands own experience in development of isometric drawings for MEP services. This role requires strong experience in interpreting P&IDs, MEP shop drawings, and 3D models (e.g., Revit, AutoCAD Plant 3D, Navisworks). The lead ensures isometric deliverables meet project standards and support successful field execution. Key Responsibilities Lead the preparation, review, and coordination of MEP and Fire Fighting isometric drawings for fabrication and installation. · Interface with design teams to extract piping layouts and details from P&IDs, 3D models, and shop drawings . Supervise and guide drafting/modelling teams in the generation of isometric drawings. Validate material take-offs (MTO) and ensure correct BOM (Bill of Materials) for procurement and fabrication. Coordinate with the site execution team to clarify drawing issues and implement redline/as-built changes. Conduct regular clash detection reviews using Navisworks or similar tools. Work with BIM teams to ensure alignment between isometric outputs and project BIM models. Maintain drawing control and ensure revision control on all issued isometric documents. Ensure compliance with MEP/FF codes , project specifications, and safety standards. Skills & Qualifications Degree/Diploma in Mechanical Engineering, or related discipline. Strong knowledge of MEP and Fire Fighting systems including pipe routing, valves, supports, and installation standards. Proficient in AutoCAD , Revit MEP , Plant 3D , and Navisworks . Experience in isometric drawing creation and MTO from models or drawings. Familiar with international standards (ASHRAE, NFPA, SMACNA, etc.). Ability to lead a team, coordinate across disciplines, and meet tight deadlines. Strong attention to detail and communication skills. Preferred Experience in large-scale infrastructure, commercial, or industrial MEP projects. BIM Level 2/3 project exposure. Knowledge of ISO and spool drawing preparation.
Minimum Number of years : 8-10 years Qualification : BE Rules & Responsibilities 1 Should be well versed in International and Utility standards, especially TAQA/ADDC/AADC/ TRANSCO etc, having a wide knowledge in developing HV, MV, LV, substations, pumping stations, etc. 2 Should have good understanding of substations (primary and distribution) and pumping stations. 3 Should be abreast with latest industry trends with various equipment used in power system. 4 Should possess strong communication skills and should be able to interface with other disciplines as well as understanding client requirements and provide quick solutions. 5 should have in-depth knowledge of various software used in Electrical Engineering like ETAP, PSS Sincal, Dialux, and in addition shall have a good command on MS Office tools like Excel, Word and PowerPoint. 6 Should be able to perform well as a team and coordinate with other disciplines. 7 Should demonstrate his/her experience having worked with major utilities in the UAE, especially in the emirate of Abu Dhabi. 8 Should be able to perform all engineering studies such as load flow, short circuit, motor starting, arc flash, harmonic studies, 9 Should be able to perform all engineering calculations such as earthing calculations, lightning risk assessment, lighting calculations, cable sizing, transformer sizing, generator sizing, switchgear sizing, ac and dc ups and battery sizing. 10 Should be able to perform calculations and prepare earthing and lightning layout drawings. 11 Should be able to develop single line diagrams, protection diagrams, schematic diagrams, general arrangement drawings, load schedules, cable schedules, etc. 12 Should be able to prepare layout drawings such as earthing and lightning layouts, cable routing layouts, cable tray routing layouts, small power and lighting layouts, equipment layouts, etc. 13 Should be able to prepare reports, bill of quantities, scope of work, specifications, data sheet and other construction documents. 14 Should be involved in carrying out tender analysis and preparation of technical and commercial bid evaluation reports. 15 Should be able to review technical submittals and shop drawings from contractor/vendor.
Minimum Number of years : 8-10 years Qualification : B.E Roles & Responsibilities Should be well versed in International and Utility standards, especially TAQA/ADDC/AADC/ TRANSCO etc, having a wide knowledge in developing HV, MV, LV, substations, pumping stations, etc. Should have good understanding of substations (primary and distribution) and pumping stations. Should be abreast with latest industry trends with various equipment used in power system. Should possess strong communication skills and should be able to interface with other disciplines as well as understanding client requirements and provide quick solutions. should have in-depth knowledge of various software used in Electrical Engineering like ETAP, PSS Sincal, Dialux, and in addition shall have a good command on MS Office tools like Excel, Word and PowerPoint. Should be able to perform well as a team and coordinate with other disciplines. Should demonstrate his/her experience having worked with major utilities in the UAE, especially in the emirate of Abu Dhabi. Should be able to perform all engineering studies such as load flow, short circuit, motor starting, arc flash, harmonic studies. Should be able to perform all engineering calculations such as earthing calculations, lightning risk assessment, lighting calculations, cable sizing, transformer sizing, generator sizing, switchgear sizing, ac and dc ups and battery sizing. Should be able to perform calculations and prepare earthing and lightning layout drawings. Should be able to develop single line diagrams, protection diagrams, schematic diagrams, general arrangement drawings, load schedules, cable schedules, etc. Should be able to prepare layout drawings such as earthing and lightning layouts, cable routing layouts, cable tray routing layouts, small power and lighting layouts, equipment layouts, etc. Should be able to prepare reports, bill of quantities, scope of work, specifications, data sheet and other construction documents. Should be involved in carrying out tender analysis and preparation of technical and commercial bid evaluation reports. Should be able to review technical submittals and shop drawings from contractor/vendor
Position : Sr. HVAC & Plumbing Engineer Location : Chennai Education: Diploma/bachelor’s degree in mechanical engineering Experience: 10 - 12 years in Design of HVAC and Plumbing Systems of Industrial Buildings, must have UAE Consultancy Experience Roles and Responsibilities : · Lead all HVAC and Plumbing design activities, ensuring designs and deliverables comply with project requirements, local authority regulations and international standards. · Cooling Load calculations, Ventilation calculations, Pressurization calculations · Design Chilled Water System, Chiller Plant, Smoke Management System · Carry out Pump head calculation, ESP Calculation, Cooling Load Calculations, Duct Heater Sizing, Fan Sizing, Pump sizing · Carry out water supply demand calculations, Drainage pipe sizing, Drainage flow calculations · Design Plumbing system, Central Hot Water System · Develop, review technical documents, including system design, specifications, and drawings · Develop solutions, design options, techno commercial comparisons · Ensure compliance with regulatory standards, oversee project teams. · Carry out technical analyses and feasibility studies · Prepare detailed design, general arrangement layouts, sections, piping isometrics · Prepare and issue specifications, data sheets, and other construction documents ensuring compliance with technical requirements. · Prepare of Design Reports, Basis of Design etc. · Review shop drawings, review supplier drawing submittals and performs technical bid analyses. · Review and resolve technical queries (TQ) and manage changes · Ensure coordination with other project components and disciplines. · Provide technical guidance to CAD Designers, BIM Modelers, and Engineers Skills: Experience in Industrial building design Hands on experience in use of Local and International standards in calculations (ASHRAE, UPC, IPC, ASPE etc.) Proficient in HAP software, ASHRAE Duct fitting Data base usage Good knowledge of Authority submission requirements – Dubai Municipality, Estidama, Trakhees, Greed Building etc.
Position : Sr. HVAC & Plumbing Engineer Location : Chennai Education: Diploma/bachelor’s degree in mechanical engineering Experience: 10 - 12 years in Design of HVAC and Plumbing Systems of Industrial Buildings, must have UAE Consultancy Experience Roles and Responsibilities : · Lead all HVAC and Plumbing design activities, ensuring designs and deliverables comply with project requirements, local authority regulations and international standards. · Cooling Load calculations, Ventilation calculations, Pressurization calculations · Design Chilled Water System, Chiller Plant, Smoke Management System · Carry out Pump head calculation, ESP Calculation, Cooling Load Calculations, Duct Heater Sizing, Fan Sizing, Pump sizing · Carry out water supply demand calculations, Drainage pipe sizing, Drainage flow calculations · Design Plumbing system, Central Hot Water System · Develop, review technical documents, including system design, specifications, and drawings · Develop solutions, design options, techno commercial comparisons · Ensure compliance with regulatory standards, oversee project teams. · Carry out technical analyses and feasibility studies · Prepare detailed design, general arrangement layouts, sections, piping isometrics · Prepare and issue specifications, data sheets, and other construction documents ensuring compliance with technical requirements. · Prepare of Design Reports, Basis of Design etc. · Review shop drawings, review supplier drawing submittals and performs technical bid analyses. · Review and resolve technical queries (TQ) and manage changes · Ensure coordination with other project components and disciplines. · Provide technical guidance to CAD Designers, BIM Modelers, and Engineers Skills: Experience in Industrial building design Hands on experience in use of Local and International standards in calculations (ASHRAE, UPC, IPC, ASPE etc.) Proficient in HAP software, ASHRAE Duct fitting Data base usage Good knowledge of Authority submission requirements – Dubai Municipality, Estidama, Trakhees, Greed Building etc.
Job Title : Isometrics Lead – MEP/Fire Fighting (FF) Location : Chennai Experience Required: 8-12 years in MEP with at least 3 years in a leadership role in isometric drafting/modelling Job Summary The Isometrics Lead is responsible for the development, review and coordination of MEP and Fire Fighting drawings especially hands own experience in development of isometric drawings for MEP services. This role requires strong experience in interpreting P&IDs, MEP shop drawings, and 3D models (e.g., Revit, AutoCAD Plant 3D, Navisworks). The lead ensures isometric deliverables meet project standards and support successful field execution. Key Responsibilities Lead the preparation, review, and coordination of MEP and Fire Fighting isometric drawings for fabrication and installation. Interface with design teams to extract piping layouts and details from P&IDs, 3D models, and shop drawings. Supervise and guide drafting/modelling teams in the generation of isometric drawings. Validate material take-offs (MTO) and ensure correct BOM (Bill of Materials) for procurement and fabrication. Coordinate with the site execution team to clarify drawing issues and implement redline/asbuilt changes. Conduct regular clash detection reviews using Navisworks or similar tools. Work with BIM teams to ensure alignment between isometric outputs and project BIM models. Maintain drawing control and ensure revision control on all issued isometric documents. Ensure compliance with MEP/FF codes, project specifications, and safety standards. Skills & Qualifications Degree/Diploma in Mechanical Engineering, or related discipline. Strong knowledge of MEP and Fire Fighting systems including pipe routing, valves, supports, and installation standards. Proficient in AutoCAD, Revit MEP, Plant 3D, and Navisworks. Experience in isometric drawing creation and MTO from models or drawings. Familiar with international standards (ASHRAE, NFPA, SMACNA, etc.). Ability to lead a team, coordinate across disciplines, and meet tight deadlines. Strong attention to detail and communication skills. Preferred Experience in large-scale infrastructure, commercial, or industrial MEP projects. BIM Level 2/3 project exposure. Knowledge of ISO and spool drawing preparation
Senior Piping Engineer Job Purpose: As a Senior Piping Engineer, you will lead and support piping design and engineering activities for complex multidisciplinary projects. You will ensure safe, cost-effective, and timely delivery of piping systems in compliance with international codes, client specifications, and quality standards. Key Responsibilities: Lead and execute piping engineering activities in all project phases (FEED, Basic, Detail Engineering, and EPCM). Prepare and review piping design documents: PFDs, P&IDs, isometrics, MTOs, layouts, and support details. Ensure compliance with relevant codes (ASME, API, EN, ISO), standards, and client requirements. Involve direct stress analysis, pipe routing, material specification, and support design. Coordinate with other engineering disciplines (civil, mechanical, process, E&I) and project stakeholders. Guide and mentor junior engineers and designers. Participate in design reviews, HAZOPs, constructability reviews, and client meetings. Support procurement and construction activities including technical bid evaluations, vendor document reviews, and site clarifications. Monitor project progress, manage technical risks, and report to project management. Requirements: Bachelor’s or master’s degree in mechanical engineering or a related discipline. 8+ years of experience in piping engineering, preferably within industrial or oil & gas sectors. Proficiency/Command in design software (AutoCAD Plant 3D, E3D, Caesar II, Navisworks, etc.). Solid understanding of piping materials, specifications, and stress analysis. Knowledge of international design codes and practices. Strong communication skills in English. Ability to work independently and as part of a multidisciplinary team. Preferred Qualifications: Familiarity with EPCM project execution and modular design. Previous experience in a consultancy or engineering services environment.
Senior Mechanical Static Engineer, Oil & Gas. Role : A Senior Mechanical Static Engineer is responsible for the design, Detailing and Drafting of static mechanical equipment. This includes: · Perform design and engineering of static equipment such as pressure vessels, shell & tube heat exchangers, air coolers, storage tanks, and columns. · Prepare technical specifications, datasheets, material requisitions, and evaluation of vendor offers. · Review and approve vendor drawings and documents. · Ensure compliance with applicable codes and standards (e.g., ASME, API, PED, EN, TEMA). · Coordinate with other engineering disciplines (process, piping, structural, etc.) and ensure alignment across deliverables. · Support procurement, fabrication, inspection, and construction activities. · Participate in design reviews, HAZOPs, and technical meetings with clients and vendors. · Conduct technical evaluations and resolve technical queries from vendors and site teams. · Provide input to project scheduling and progress reporting. Key Responsibilities: Design & Engineering · Develop and review mechanical design specifications for static equipment. · Ensure designs comply with international codes (e.g., ASME, API, PED). · Perform mechanical calculations (wall thickness, nozzle loads, etc.). Project Execution · Experienced in Basic, FEED and detailed engineering phases. · Oversee vendor document reviews and ensure compliance with project specs. · Coordinate with other disciplines (process, piping, civil, etc.). Leadership & Mentoring · Guide junior engineers. · Serve as a technical authority on static equipment issues. Qualifications: · Bachelor’s /master’s degree in mechanical engineering. · 8–15+ years of relevant industry experience. · Professional certifications (e.g., PE, API 510/570) are a plus preferable. Typical Industries: · Oil & Gas (upstream and downstream).
Position : Senior Instrumentation Engineer Industry : Oil & Gas Experience Level : 10 to 15 Years Key Responsibilities: Design, specification, and selection of instrumentation and control systems for upstream, midstream, and downstream oil & gas projects. Develop P&IDs, instrument index, data sheets, loop diagrams, wiring diagrams, and hook-up drawings. Instrument index, I/O lists, loop diagrams , Instrument datasheets and specifications , Control system architecture , Cable schedules and hookup drawings Perform instrument sizing and selection for pressure, flow, level, and temperature measurements. Review and approve vendor documents and technical specifications. Support HAZOP, SIL, and other safety studies. Interface with process, mechanical, electrical, and control system teams. Lead instrumentation discipline in multi-discipline project teams. Provide technical guidance to junior engineers and designers. Ensure compliance with industry codes (API, ISA, IEC, NEC, etc.) and client standards. Requirements: Bachelor's degree in Instrumentation, Electrical, or Electronics Engineering. Minimum 8 years of experience in instrumentation design and engineering within the oil and gas sector. Strong knowledge of control systems (DCS, PLC, ESD, F&G). Proficiency in Smart Plant Instrumentation (SPI), IN tools, or equivalent. Familiar with international standards (ISA, IEC, API). Strong project management and communication skills.
Senior Process Engineer – Oil & Gas Role Summary: A Senior Process Engineer in the Oil & Gas sector leads and oversees the design, development, optimization, and troubleshooting of process systems involved in the exploration, production, refining, and transportation of oil and gas. Key Responsibilities: Lead process engineering activities for upstream (E&P), midstream, or downstream projects. Develop and review PFDs, P&IDs, heat and material balances, and process simulations (using HYSYS, Aspen Plus, etc.). Design and specify process equipment (separators, heat exchangers, compressors, etc.). Perform process safety analysis (HAZOP, LOPA, SIL assessments). Evaluate process performance and recommend improvements for efficiency and safety. Collaborate with multidisciplinary teams (mechanical, instrumentation, operations). Ensure compliance with industry standards (API, ASME, ISO) and company procedures. Provide technical mentorship to junior engineers and support project management. Assist in commissioning, start-up, and troubleshooting of new and existing facilities. Typical Requirements: Education : Bachelor’s or master’s degree in Chemical Engineering. Experience : 8–15+ years in oil & gas process engineering (upstream, midstream, or downstream). Software : Proficient in simulation tools (HYSYS, Aspen HYSYS, PRO/II, Pipesim). Certifications : PE License or chartered status is preferred. Skills : Strong knowledge of process design, fluid dynamics, thermodynamics, and safety regulations.
Position : Senior Electrical Engineer – Oil & Gas Qualification: BE-EEE Experience : 10-15 Years - Oil & Gas Experience. Job Summary: We are seeking a highly skilled and experienced Senior Electrical Engineer to lead and manage electrical engineering activities for oil and gas projects. The ideal candidate will have a strong background in the design, development of electrical systems in hazardous environments, ensuring compliance with industry codes and safety regulations. Key Responsibilities: Lead and supervise electrical engineering design for oil and gas facilities (e.g., substations, MCCs, power distribution, grounding, lighting, and cathodic protection). Develop and review technical specifications, data sheets, load calculations, and single-line diagrams. Oversee and participate in FEED, detailed engineering, and EPC phases of projects. Perform power system studies: load flow, short circuit, arc flash, relay coordination, and motor starting analysis. Ensure all electrical designs meet IEC, IEEE, NEC, API, NFPA, ATEX, and other relevant standards. Collaborate with multidisciplinary teams (mechanical, instrumentation, process, civil) to ensure integrated project delivery. Conduct site surveys, inspections, and commissioning support for both greenfield and brownfield projects. Review vendor documents, ensure technical compliance, and assist in procurement activities. Provide technical guidance and mentorship to junior engineers. Interface with clients, consultants, and regulatory bodies as needed. Experience with HV/MV/LV systems, generators, UPS, VFDs, switchgear, and motor controls.
Job Purpose: As a Senior Piping Engineer, you will lead and support piping design and engineering activities for complex multidisciplinary projects. You will ensure safe, cost-effective, and timely delivery of piping systems in compliance with international codes, client specifications, and quality standards. Key Responsibilities: Lead and execute piping engineering activities in all project phases (FEED, Basic, Detail Engineering, and EPCM). Prepare and review piping design documents: PFDs, P&IDs, isometrics, MTOs, layouts, and support details. Ensure compliance with relevant codes (ASME, API, EN, ISO), standards, and client requirements. Involve direct stress analysis, pipe routing, material specification, and support design. Coordinate with other engineering disciplines (civil, mechanical, process, E&I) and project stakeholders. Guide and mentor junior engineers and designers. Participate in design reviews, HAZOPs, constructability reviews, and client meetings. Support procurement and construction activities including technical bid evaluations, vendor document reviews, and site clarifications. Monitor project progress, manage technical risks, and report to project management. Requirements: Bachelor’s or master’s degree in mechanical engineering or a related discipline. 10+ years of experience in piping engineering, preferably within industrial or oil & gas sectors. Proficiency/Command in design software (AutoCAD Plant 3D, E3D, Caesar II, Navisworks, etc.) Solid understanding of piping materials, specifications, and stress analysis. Knowledge of international design codes and practices. Strong communication skills in English. Ability to work independently and as part of a multidisciplinary team. Preferred Qualifications: Familiarity with EPCM project execution and modular design. Previous experience in a consultancy or engineering services environment.
Position: Senior Electrical Engineer – Oil & Gas Qualification: BE-EEE Experience: 10-15 Years - Oil & Gas Experience. Job Summary: We are seeking a highly skilled and experienced Senior Electrical Engineer to lead and manage electrical engineering activities for oil and gas projects. The ideal candidate will have a strong background in the design, development of electrical systems in hazardous environments, ensuring compliance with industry codes and safety regulations. Key Responsibilities: Lead and supervise electrical engineering design for oil and gas facilities (e.g., substations, MCCs, power distribution, grounding, lighting, and cathodic protection). Develop and review technical specifications, data sheets, load calculations, and single-line diagrams. Oversee and participate in FEED, detailed engineering, and EPC phases of projects. Perform power system studies: load flow, short circuit, arc flash, relay coordination, and motor starting analysis. Ensure all electrical designs meet IEC, IEEE, NEC, API, NFPA, ATEX, and other relevant standards. Collaborate with multidisciplinary teams (mechanical, instrumentation, process, civil) to ensure integrated project delivery. Conduct site surveys, inspections, and commissioning support for both greenfield and brownfield projects. Review vendor documents, ensure technical compliance, and assist in procurement activities. Provide technical guidance and mentorship to junior engineers. Interface with clients, consultants, and regulatory bodies as needed. Experience with HV/MV/LV systems, generators, UPS, VFDs, switchgear, and motor controls. Provide technical guidance and mentorship to junior engineers. Interface with clients, consultants, and regulatory bodies as needed. Should be able to develop single line diagrams, protection diagrams, schematic diagrams, general arrangement drawings, load schedules, cable schedules, etc. Should be able to prepare layout drawings such as earthing and lightning layouts, cable routing layouts, cable tray routing layouts, small power and lighting layouts, equipment layouts, etc.