Ballestra India is looking for passionate individuals willing to associate themselves with the growing organization in India. Roles & Responsibilities: Analysis of the contractual scope of work giving evidence of any critical area to the engineering disciplines involved. Participation to Hand-Over meeting, Kick-Off meetings. Coordination of periodical engineering coordination meetings with interested parties (process and detail engineering departments, customers, suppliers). Definition with the technical disciplines of the project document list. Coordination with the project manager and the planner for engineering activities planning to be included in the project schedule. Support to the technical disciplines in defining the battery limits of the engineering sub-contracts. Coordination of the correct flow of technical information to support the technical disciplines of the interested parties (internal departments, customers, suppliers) for carrying out the normal engineering processes and solving problems through calls and/or weekly meetings. Support to technical disciplines for particular review activities (e.g. 3D Model review); Preparation of project coordination documentation (e.g. project engineering plan, environmental data, equipment list); Support to the planner for monitoring the delivery time of the planned documentation to meet the project deadlines. Support to the project manager in monitoring the engineering manhours spent (actual vs planned) and definition of the manhours to finish (forecast) with the technical disciplines. Support to the technical departments during the engineering phase of the equipment suppliers. In case of complex packages, direct coordination of the technical interface between internal departments and suppliers. Monitoring of the completion of the technical documentation and the document lists (both project document list and equipment supplier document list), in coordination with the document controller. Coordination of local expertise contractors, where applicable and according to the project structure. Coordination of external companies for the certification activity (e.g. EAC Declarations), where applicable; Coordination of external companies for engineering activity (e.g. structural design, civil design); Support to site activities for the resolution of technical problems that may arise in the construction and commissioning phases, the collection of the as-built documentation, the possible management of the punch list after the plant acceptance Other Significant Role Requirements: Languages: excellent knowledge of written and spoken English. Personal skills: passion for one's work, organizational skills, planning and control of activities, result-oriented, "problem solving", ability to teamwork. Availability to travel to meet Customers, Suppliers, Site team during the year if required by the Project.

Ballestra India is looking for passionate individuals willing to associate themselves with the growing organization in India. Role Purpose: Development of Process Control documents with respect to P&IDs, Process Specification. Understanding Instrumentation Details, Electrical Schematics, Communications Network Architecture, to include in the Process Control documents. Knowledge on Multiple PLC - SCADA Platforms, Understanding the communication Protocols, Deep understanding of PLC logic functions. Review of Vendor documents, Customer specifications, and suggest the Standards. Ability to travel to the site in order to discuss with the customer and other stakeholders about the PLC/DCS-based Automation solutions. Essential Functions & Responsibilities: Process Controls Document Preparation I.e. Control Philosophy, Operation sequence Chart, Cause and Effect, interlock list, Alarm list etc. Preparation of Closed control loops and Control Logic Diagrams for plant operations Coordination with other engineering departments, Supporting Package equipment procurement, Interface and networking Concept for Offsite Control System Understanding fundamentals of fluid mechanics and Functions of Equipment i.e, Pumps, Blowers, and instruments Vendor Document Review and coordinating with the vendor to include required controls and safety requirements in process documents. Coordinating with the Automation Engineer for the implementation of Controls as per the Standards and Requirements. Participate in Process Design Review Meeting, P&ID Review meetings and provide input, understanding requirements in terms of Process Controls Attend HAZOP, SIL, and Meetings and provide inputs in terms of Process Controls. Conduct Controls Design reviews on the Projects, along with Process and other department team members. Understanding the customer requirement and developing Standard and Customized Template logics, Screens, faceplate etc, based on the requirement Knowledge of electrical circuits, PLC Panel Drawings, LV motor control centres, the interface of Drives to PLCs, etc. Knowledge of industrial communication protocols like Profinet, Profibus, Ethernet IP, and Modbus is a must. Conducting FAT/SAT for PLC/DCS systems Softwares with Internal and External customers. Specification/MR for I&C (DCS, PLC Field Devices, Final Control Elements, etc.) Other Significant Role Requirements: Lead internal initiatives aimed at collaborating with the cross-functional teams proactively to seek relevant details Proven ability to follow a set of procedures and standards, providing suggestions to new Concepts from established standards Excellent written and verbal communication skills (including liaising, reporting, documentation, and presentations) Experience in working on Cascade Process loops, PID, Recipe Calculations, and complex Algorithms Proven ability to quickly shift focus from one technical issue to another based on the customer's requirement and commitment. Maintaining Standard Process Controls Document Database. Coordinating with Vendors for the PLC/DCS SAT testing and requirements.

Essential Functions & Responsibilities: Functions as Project lead for full scope of PCS and oversees technical aspects from end to end of Ballestra projects. Develops plot plan for FEED /Feasibility or new plant engineering from geographical survey. Able to self work on AutoCAD 2D for any modifications of plot plan. Understands EPCM methodologies and works with cross functions to control the project schedule, budgeted hours and quality. Manages project approvals for critical deliverables, able to thoroughly review the detailing engineering deliverables Accountable to resolve technical problems for all value streams engineering Understands clients needs; identifies and addresses design parameters and problems; develops and implements solutions. Interface with other area leads, Senior Engineers, Project Engineers and Project Managers. Prepare the document list. Make a first material estimate starting from P&ID. Design the critical piping routing taking into consideration aspects such as accessibility, maintainability, safety and material costs. Co-ordinate technical activities performed inside or outside the Company. Performs Inter-discipline & discipline QA/QC and engineering compliance checks on all work performed by themselves or junior engineers within the group. Review and management of project and general specifications, engineering procedures and engineering policy. Need to participate in internal/external kick-off meeting and progress meeting with client. Train / mentor engineers. Experience The candidate shall have: 15-20 years experience as piping specialist for chemical/Fertilizer/Process plants Diverse working experience in Technical project management, conceptual and detailed design, and construction. Experienced in estimation of engineering hours. Experienced in preparation and finalisation of general layout & plot plan. Define basis of stress analysis & verification of results Well acquainted with technical approvals. Knowledge of Interdisciplinary Work Processes/Interface/Deliverables Development of Work Breakdown Structure/Activities List Familiarity with codes, standards, regulations and practices applicable to the design and construction of onshore and offshore structures/production facilities Software Knowledge : Office package, Navisworks Manage , any 3D modelling software experience(Cadworx preferred), Autocad 2D for Layout generation is mandatory. Education: Engineering in Mechanical/Chemical. Advantageous to have Piping/Plant engineering Certification/diploma

Ballestra is looking for expert consultants who have excellent knowledge working on plant engineering for any of the following types of plants. - Sulphuric acid plants - Phosphoric acid plants - NPK/DAP or other Fertilizers - Anhydrous Hydrogen Choloride plant - Detergent or soap plant This role will require consulting throughout the project execution for large volume plant engineering. The Candidate shall be subject matter expert in any of the above areas and shall be able to help engineers and designers to drive the appropriate output on engineering of layout, plot plan, general arrangement, 3D model, Isometrics, MTO, Foundation layout or other engineering deleiverables. Preffered to relocate to Bangalore but open for Remote work. Share your profile to discuss more details.

Must have requirements: Managed 10 to 20 members previously- Capable to do Performance management, Objective setting, Work planning and allocation or other leadership activities Minimum 2 years of plant engineering experience from any of chemical/ fertilizer/ detergent/soap /surfactants industries. Technically sound with plant engineering(Basic engineering and layout engineering) and able to manage designers and engineers Good Communication and flexibility to adopt. Role requires 60% on technical work Essential Functions & Responsibilities: Functions as Engineering team lead and oversees technical aspects from end to end of Ballestra projects. Develops plot plan for FEED /Feasibility or new plant engineering from geographical survey. Able to self work on AutoCAD 2D for any modifications of plot plan. Understands EPCM methodologies and works with cross functions to control the project schedule, budgeted hours and quality. Manages project approvals for critical deliverables, able to thoroughly review the detailing engineering deliverables Accountable to resolve technical problems for all value streams engineering Understands clients needs; identifies and addresses design parameters and problems; develops and implements solutions. Interface with other area leads, Senior Engineers, Project Engineers and Project Managers. Co-ordinate technical activities performed inside or outside the Company. Performs Inter-discipline & discipline QA/QC and engineering compliance checks on all work performed by themselves or junior engineers within the group. Review and management of project and general specifications, engineering procedures and engineering policy. Need to participate in internal/external kick-off meeting and progress meeting with client. Coach and develop team, set objectives, performance management etc. Able to create planning and scheduling documents for multiple projects, resource management and KPI management of quality and ontime delivery. Experience The candidate shall have: 15-20 years experience as piping specialist Diverse working experience in Technical project management, conceptual and detailed design, and construction. Experienced in estimation of engineering hours. Experienced in preparation and finalisation of general layout & plot plan. Knowledge of Interdisciplinary Work Processes/Interface/Deliverables Development of Work Breakdown Structure/Activities List Familiarity with codes, standards, regulations and practices applicable to the design and construction of onshore and offshore structures/production facilities Software Knowledge : Office package, Navisworks Manage , any 3D modelling software experience(Cadworx preferred) Education: Engineering in Mechanical/Chemical.

Ballestra India is looking for passionate individuals willing to associate themselves with the growing organization in India. Roles & Responsibilities: Proven practical skills in Planning, forecasting, and scope management for Engineering Resource allocation and working in strict collaboration with Engineering Management, Project control department discipline specialist, project manager, and management control. As additional responsibility, the role requires performing document control activities. Note this is Resource planner linked to Engineering and not with HR function, Dont apply if you belong to HR function. Must have working skill in Advanced Excel or Power BI. Maintain and develop the Company OBS with relevant Engineering roles and resources. Develop the long/middle-term workload with a high schedule level (department level) and prepare a report. Define different scenarios based on prevision works intake. Develop a low/middle-term workload at a high level (department level) for the hot project (next 6 months' order intake in the proposal phase), including estimating the workload for an external subcontractor. Verify over/under allocation for resource/role/department. Monthly produce the workload report that includes active jobs, proposals, and prospect Production and issue of formal workload monthly reports Provide statistical data for management reviews. Internally he/she will report to the Engineering Manager and will interface with multiple stakeholders (Director, discipline specialist, discipline leader, project manager, project control, management control) and external engineering companies to maintain and program forecast manhours to achieve the greatest organizational value without under- or over-utilizing any one resource.

Don't apply if you are not having min 5 years of experience in Plant engineering and Expertise with Cadworx and AutoCAD 2D. Job Location: Bangalore A mandatory tool test(Cadworx/AutoCAD 2D) will be conducted after profile gets shortlisted Essential Functions & Responsibilities: Essential to be fully aware of plant engineering principles for 3D-modelling and Pipe routing following industry standards. Expected to work on detailed engineering deliverables under the guidance of Senior professionals and capable to produce any of the below documentation: 3D model 3D structural modelling 2D steel structural drawings Above ground foundation drawings Underground routing drawing Nozzle orientation drawing Special pieces drawing/documents Piping arrangement drawings Piping sketches Material take-off Supports drawings and MTO (material take off) Experience The candidate shall have: 5+ years experience as plant engineering Expert in 3D modelling using Cadworx, 2D drafting using AutoCAD 2D Capable to manage Cadworx Data Base Expert in 3D modeling/finalizing of logical and physical supports in piping model. Education: Engineering in Mechanical/Chemical. PG Diploma in Piping is preferable but not mandatory.