Responsible for performing engineering activities to support planning, designing, construction, maintenance, and alteration of buildings, highways, bridges, airports, dams, tunnels, water/sewage systems, power plants, and transportation system projects. Includes estimating and determining feasibility based on analysis of maps/aerial photographs, soil composition, terrain, hydrology, geology, and environmental impact studies. Discipline concerning highways, streets, transportation systems, drainage and flood control structures, surface and subsurface hydrologies, sewers, tunnels, railroads, airports and airways, geotechnical analysis, waterfronts, water and wastewater systems, water power and supply apparatus, wells, pumps, bridges, dams, irrigation structures, water purification apparatus, incinerators or site fire protection systems, exclusive of signifcant structures. Research, design and construction of fixed works, other than significant structures. Duties and Responsibilities Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. 3+ years of design experience in structural engineering. Minimum 2+ years of experience in UK Rail industry with experience in Station structures, platform, lineside infrastructure etc. Multi D coordination experience, on railway projects. Experience in leading a small team of Engineers and CAD. Experience in both Concrete and Steel design. RC detailing and BBS check experience. Design experience in general civils work like foundations(pile, raft, pad), retaining walls etc. Experience in design/assessment of Steel footbridge, stair and lift shaft.

Document and report non-compliance issues, including gaps in fire safety preparedness or design flaws. Documentation and Reporting: Prepare comprehensive audit reports detailing observations, findings, and recommendations for corrective actions. Present findings to management and provide actionable solutions for improvement. Training and Awareness: Conduct training sessions or workshops for staff on fire safety awareness and best practices. Collaborate with teams to foster a culture of safety and compliance. Coordination and Follow-up: Work with fire system vendors, maintenance teams, and facility management to resolve identified issues. Conduct follow-up audits to ensure implementation of recommended actions. Qualifications Bachelors degree in Fire Engineering, Safety Engineering, or a related discipline. Certification in fire safety auditing or related fields (e.g., NEBOSH, OSHA) is preferred. Minimum of 5 years of experience of experience (after Bachelors) in fire safety auditing or related roles, preferably in manufacturing industries. Strong knowledge of Indian fire safety laws, regulations, and standards (e.g., NBC, BIS codes). Proficiency in identifying fire safety design and operational deficiencies. Excellent analytical, problem-solving, and report-writing skills. Strong communication and interpersonal skills to effectively liaise with stakeholders. Willingness to travel extensively across India to conduct onsite audits. Key Competencies: Attention to detail and a methodical approach to audits. Ability to work independently and as part of a team. Commitment to maintaining high standards of safety and compliance. Preferred: Experience auditing large-scale or complex manufacturing facilities. Familiarity with emerging technologies in fire safety systems.

Job Description Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements.

5 to 10 Years of experience in wastewater/water industry. Awareness of pipe network design codes Experience in designing various mechanical components of wastewater treatment systems like ASP, MBBR, SBR, MBR, Digesters, Solids Handling systems, etc. Experience in designing Water Treatment systems including conventional and advance system (e.g., desalination systems). Experience leading the team on various design tasks/deliverables like- Developing the design of Wastewater Treatment Plants (including Sludge Treatment facilities and Odour Control facilities) and Water and Wastewater Networks. Water and wastewater mechanical equipment sizing and selection: Screens, Mixers, Conveyors, Sludge Thickeners and Centrifuges, Chemical dosing systems, etc. Preparing hydraulic calculations for pressurized/gravity systems. Pump and fan sizing/selection. Valve selection (including penstocks). Pipe sizing and material selection. Developing concept design, detail design, tender, and construction documentation in accordance with both, schedule, and budget. Preparing and reviewing design documents e.g., calculations, datasheets, specifications, pipe, and valve schedules. Supervision of 3d modeling and 2d drawing preparation. Good understanding of P&IDs and PFDs. Multidiscipline coordination. Undertake liaison with internal clients/customers/vendors to develop business relationships. Providing mentoring and support for junior engineers and cad technicians. Contribute to the production and delivery of concise high-quality technical documentation in English. Qualifications B.E./M.Tech. (preferred) in Mechanical Engineering field from a recognized university. Professional registration or licensure in their designated home office country or be in active pursuit of such registration.

Refers to the field of engineering dealing with the analysis and design of structures that support or resist loads. Commonly involved in the design and assessment of Railway and Highway bridges for UK Middle East and Australia Region. Duties and Responsibilities The candidate will be responsible for a variety of engineering tasks in the initial planning, design and modification phase of projects. Performing assessment of bridges to National Highways and Network Rail Structural analysis and Design of Bridges and Viaduct Structures, Flyovers, Underpasses, Culverts and Retaining walls. Experience with bridge and related structural design schemes. Experience in road and/or rail projects with UK, Middle East and Australia projects. Excellent technical skills design. Able to correlate and interpret the data shared by supporting interdisciplinary teams. Problem solving skills, able to propose alternative solutions for problems encountered. Experience in complete life cycle of a design project within Highway/Railway environment. Able to work in a diverse team spread across different geographical locations. Able to provide guidance to Entry level Engineers. Able to work under minimum guidance / Supervision. Able to handle multiple projects and lead highly capable design teams. Understanding in various software packages ideally including MIDAS, Autodesk Structural Bridge Design, LUSAS with experience in Finite Element Analysis preferred. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK) or Progressing towards Chartership with relevant experience is Preferred 6+ years of design experience in structural Engineering Minimum 3+ years of experience working in the rail and road bridges and associated structural engineering schemes assessment to detailed design. Exposure to International standards such as Euro Code, British Standards, AASHTO, AREMA, DMRB and Australian Standards

Performing end-to-end cash application activities for AECOM entities on specified region. Follow established policies, procedures, and management guidance. Manage the daily cash applications activities ensuring timeliness and meeting all required SLA. Work closely with the team, team lead/manager and relevant offshore and onshore teams within O2C Tower in reaching goals and accomplishing the team vision. Responsibilities & Duties Process and reconcile account receivables and remittances Work closely with customer and stakeholder teams to identify customers requirements and provide solutions. Collaborates with the collection and billing group for non-applied payments. Communicate to Accounts Payable Payroll, GL team for all non-AR transactions. Prepare end of day reports such as daily collections, bank reconciliation Perform periodic audits of the general ledger and other financial documents Address payment issues like double payments or other discrepancies (overpayments, short payments, forex adjustments, etc.) Process refund internally (supplier) and externally (client refunds) Unallocated payments research and identification Mailbox management Process monthly netting requests, monitor factoring payments, invoice offsets Perform month end closing of current AR period and opening of new period Engage in collection management processes as necessary Qualifications Minimum Requirements: Bachelors degree in Accounting/Finance or equivalent relevant courses. Advanced knowledge and understanding of accounting standards and procedures and internal controls. 3+ year of Proven experience as a cash applications or similar role Excellent skills in investigating/researching payment history/details Knowledge of billing procedures and collections Working knowledge of MS Office and databases Comfortable working with targets Patience and ability to manage stress Able to handle difficult or irate stakeholders Problem-solving skills Very keen to details Ability to work independently and contribute to broader team objectives Ability to multitask and manage time amid multiple deadlines Additional Information Interpersonal skills to communicate effectively with a wide range of positions within the organization. Good verbal and written communication skills; able to communicate in a clear, constructive, and professional manner. Strengthen relationships by creating and maintaining communication with internal/external stakeholders and/or team members; understand needs, resolve issues, and meet expectations. Cultural adaptability to cater clients in different regions. Actively look for ways to improve current process and ways of working Team player Ready to work on any shift (Early Bird (6 AM to 3 PM), Noon (12 Noon to 9 PM) and Night Shift (6 PM to 3 AM)) Amendable to work extended working hours on critical days (e.g. fiscal month end/quarter end/year end), Indian Holidays and Weekends as needed.

Performs complex BIM or Plant Data Centric assignments involving the use of multiple application platforms, such as Revit, Intergraph SmartPlant, Plant 3D, etc. software, to achieve set results and deadlines Duties and Responsibilities Works under limited supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements (objects within the drawing, doors, lights, etc.). Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. 6+ years' experience post qualification. Experience in Civil 3D software tool Work experience in ME Urban Infrastructure Design works (prefer Dry Utilities design experience in consulting firms) Preparing electrical drawings including SLD, schematic, Layout and 3D modelling for Electrical, Telecom, Street lighting networks. Good knowledge of Revit is added advantage Strong communication skills in English is desirable.

AECOM is seeking a Designer - Civil 3D to be based inBengaluru, KA, India. Candidates will be responsible for the following activities: Civil 3D and CAD Specialist with 2+ yearsof experience in the Water utilitiesfield. Works under general supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements. Candidate must have working experience in Civil 3D and AutoCAD tools in Utility projects. Good knowledge in common Data Environment(CDE) such as project wise, BIM 360, ACC. Experience with developing reports and presentations. Excellent interpersonal and communication skills for individual interactions and in group settings. Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, able to work independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team.

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position.

The responsibilities of this position include, but are not limited to: Undertaking design and planning activities on maritime projects - container terminals, mining/bulk, oil/gas, marinas, ports and harbors, offshore wind, coastal resiliency and development schemes Independently prepare calculations, drawings, and specifications and documents, and oversee the development of technical deliverables prepared by junior structural engineers. Oversee the work of junior structural engineers. Perform quality control review of design calculations or drawings. Participate in the development of technical scope and design fee estimates in response to RFPs. Lead and coordinate marine team with other in-house and subconsultant engineering disciplines as needed. Participate in interdisciplinary review of project deliverables. Work alongside a project manager to ensure technical and business-related successes of projects. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK) 15+ year's experienceas a Structural Engineer with a focus in ports, marine and waterfront projects Experience with computer analysis and design software such as SAP 2000, RISA 3D, STAAD.Pro, SAFE Experience with AutoCAD and Revit Excellent oral and written communication skills

Civil 3D and CAD Specialist with 6+ yearsof experience in the Water utilitiesfield. Candidate should be proficient enough in handling Civil 3D software. Candidate should have experience working on Pressure Pipe Networkand Gravity Network in Civil 3D. Should know, preparation of Plan & Profiles for the underground utilities. Proficiency in AutoCAD (latest versions & its tool sets) and Civil 3D Plan, coordinate, and execute work in a safe, timely, cost-effective, and compliant manner. Research and follow jurisdictional requirements unique to each project. Review and draft rough sketches, drawings, etc. as provided by the Project Engineer and/or BIM Manager. Determine scale and perform mathematical calculations that require knowledge of geometry, algebra, trigonometry, fractions, percentages, ratios, and proportions. Ability to adapt to different cultures and working environments to build rapport with customers. Experience in using written and spoken English within a business environment. Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, able to work independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team

Responsibilities & Duties Role includes assisting Team Lead and supervising a team, resolving complex issues, and driving process improvements to enhance efficiency and accuracy The position acts as a critical support role to the Team Lead, ensuring adherence to internal controls and compliance with organizational policies. Performing end-to-end Billing activities and follow established policies, procedures, and management guidance. Manage the daily activities by ensuring timeliness and meeting all required SLA. Work closely with the team, team lead/manager and relevant offshore and onshore teams within O2C Tower in reaching goals and accomplishing the team vision. Collaborate with internal/external stakeholders to ensure invoices are submitted to the clients timely and accurately. Distribute invoices to external clients through various distribution platforms e.g. mail, email, and client portal uploads. Respond to inquiries and escalate issues and concerns to the Team Lead for timely resolution. Participate in governance meetings with Operations Team and/or clients. Provide guidance and training to team members to improve productivity and performance Supervise the processing of various Billing types (T&M, Lumpsum, Percentage etc.). Review and resolve escalated issues related to billing with the Onshore team. Generate, review, and analyze weekly, and monthly revenue reports. Assist in month-end and year-end closing activities related to accounts receivable. Identify trends in discrepancies and propose preventive measures. Collaborate with the Team Lead to identify opportunities for process improvements and implement best practices. Partner with IT and finance teams to optimize ERP systems for enhanced Billing processes. Serve as a point of contact for internal and external stakeholders regarding process queries. Address critical issues and recommend resolutions to the Team Lead within the prescribed turn-around time. Perform transition-related activities such as process training & desktop procedures creation. Contribute in various and simultaneous process improvement initiatives to streamline processes and improve customer experience. Support the Team Lead in report preparation by providing analysis and recommendation within established guidelines and procedures. Contribute specialized expertise to different assigned projects and may provide key updates to Team Lead and Manager. Assist in process trainings and knowledge transfers for new hires and may perform peer reviews as needed. Perform various billing tasks in compliance with service level agreement, process, policies, and procedures. Manage complex billing transactions and perform quality review of invoices. Monitor assigned projects and collaborate with Stakeholders to ensure invoices are submitted to the clients timely and accurately. Assess identified issues and collate documentation to assist in investigating and in resolving common and recurring issues Maintain the SOP/DTP of current processes and incorporate documentation updates as required. Assist junior team members to address process related concerns Qualifications Bachelors degree in finance & accounting or any Business-related course. 6 to 8 years of relevant professional experience in Billing, Accounts Receivable, or Order-to-Cash. Excellent communications skills in both written and spoken English. Advanced proficiency in MS Applications (Word, Excel, Outlook, PowerPoint) and Adobe application. Advanced knowledge and understanding of accounting standards and procedures and internal controls. Experience working with ERP, i.e. Oracle Systems or SAP is preferred. Previous experience in process migration/transition is preferred. Experience working in Shared Services or BPO is preferred. Additional Information Ability to effectively communicate and collaborate within a varied audience and internal and external customers. (Communication) Ability to maintain good customer relationship with the ability to initiate ways to improve customer support customer experience (Customer Service) Ability to be thorough and meticulous in completing assigned tasks and with the ability to propose ways to prevent or eliminate errors, discrepancies & issues. (Attention to Detail) Ability to identify and resolve moderate and complex issues by applying best practices and technical expertise and may recommend solutions for unique scenarios. (Problem Solving) Ability to work in fast-paced environment and maintain efficiency and productivity while adjusting to changes in work structure, process, and requirements. (Adaptability)

Builds analytic and design skills. Conducts engineering design under the supervision of an experienced engineer. Creates designs, calculations, sketches, diagrams, schematic drawings, and final working drawings under the supervision of an experienced engineer. Collects and analyzes data under the supervision of an experienced engineer. Uses computer software as a tool for solving basic engineering problems. Performs work in accordance with agreed upon budget and schedule under supervision.

Responsibilities & Duties Role includes assisting Team Lead and supervising a team, resolving complex issues, and driving process improvements to enhance efficiency and accuracy The position acts as a critical support role to the Team Lead, ensuring adherence to internal controls and compliance with organizational policies. Performing end-to-end Billing activities and follow established policies, procedures, and management guidance. Manage the daily activities by ensuring timeliness and meeting all required SLA. Work closely with the team, team lead/manager and relevant offshore and onshore teams within O2C Tower in reaching goals and accomplishing the team vision. Collaborate with internal/external stakeholders to ensure invoices are submitted to the clients timely and accurately. Distribute invoices to external clients through various distribution platforms e.g. mail, email, and client portal uploads. Respond to inquiries and escalate issues and concerns to the Team Lead for timely resolution. Participate in governance meetings with Operations Team and/or clients. Provide guidance and training to team members to improve productivity and performance Supervise the processing of various Billing types (T&M, Lumpsum, Percentage etc.). Review and resolve escalated issues related to billing with the Onshore team. Generate, review, and analyze weekly, and monthly revenue reports. Assist in month-end and year-end closing activities related to accounts receivable. Identify trends in discrepancies and propose preventive measures. Collaborate with the Team Lead to identify opportunities for process improvements and implement best practices. Partner with IT and finance teams to optimize ERP systems for enhanced Billing processes. Serve as a point of contact for internal and external stakeholders regarding process queries. Address critical issues and recommend resolutions to the Team Lead within the prescribed turn-around time. Perform transition-related activities such as process training & desktop procedures creation. Contribute in various and simultaneous process improvement initiatives to streamline processes and improve customer experience. Support the Team Lead in report preparation by providing analysis and recommendation within established guidelines and procedures. Contribute specialized expertise to different assigned projects and may provide key updates to Team Lead and Manager. Assist in process trainings and knowledge transfers for new hires and may perform peer reviews as needed. Perform various billing tasks in compliance with service level agreement, process, policies, and procedures. Manage complex billing transactions and perform quality review of invoices. Monitor assigned projects and collaborate with Stakeholders to ensure invoices are submitted to the clients timely and accurately. Assess identified issues and collate documentation to assist in investigating and in resolving common and recurring issues Maintain the SOP/DTP of current processes and incorporate documentation updates as required. Assist junior team members to address process related concerns Qualifications Bachelors degree in finance & accounting or any Business-related course. 6 to 8 years of relevant professional experience in Billing, Accounts Receivable, or Order-to-Cash. Excellent communications skills in both written and spoken English. Advanced proficiency in MS Applications (Word, Excel, Outlook, PowerPoint) and Adobe application. Advanced knowledge and understanding of accounting standards and procedures and internal controls. Experience working with ERP, i.e. Oracle Systems or SAP is preferred. Previous experience in process migration/transition is preferred. Experience working in Shared Services or BPO is preferred. Additional Information Ability to effectively communicate and collaborate within a varied audience and internal and external customers. (Communication) Ability to maintain good customer relationship with the ability to initiate ways to improve customer support customer experience (Customer Service) Ability to be thorough and meticulous in completing assigned tasks and with the ability to propose ways to prevent or eliminate errors, discrepancies & issues. (Attention to Detail) Ability to identify and resolve moderate and complex issues by applying best practices and technical expertise and may recommend solutions for unique scenarios. (Problem Solving) Ability to work in fast-paced environment and maintain efficiency and productivity while adjusting to changes in work structure, process, and requirements. (Adaptability)

Performing basic architectural calculations. Preparing specifications, reports and related data tables. Maintaining liaison with design and drafting groups. Preparing, reviewing, and approving drawings as required. Under the direction of the Supervising Architect, may independently perform advanced technical assignments of various complexities within approved schedules and budgets. May coordinate technical and administrative activities with employees in other disciplines and other departments participating on an assigned project. May assist in the training and evaluation of assigned architectural and design/drafting personnel. May review and approve conceptual designs. May assist in the development of new architectural methods and techniques. Performing basic architectural/engineering calculations. Qualifications A Bachelor of Architecture is required Applicants are required to have between 8-12 years of experience in Architecture, Middle East/US/UK experience would be desirable but are not essential. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Should have good skills in software like Autodesk Revit, AutoCAD, MicroStation and other related design software Should have basic transport architecture experience and should have worked in Workplace interiors. Should be keen to learn and develop new methods and software. Proven ability in delivering projects under tight timelines. Responsible for providing architectural guidance, calculations, analysis, studies and recommendations for a specialized segment of the Architectural Discipline within the schedules and budget of an assigned project. May manage various size groups of architects, designers and/or specialists. May work on modest size projects and/or assist Project Architectural or Engineering Managers with higher grades.

Job brief Responsible for ensuring timely and accurate processing of timesheet corrections and missing timesheets.. This role involves managing timesheet discrepancies, supporting HRO , employees and project teams on OTA entries reconciliation processes, collaborating with internal and external stakeholders to resolve issues. The position is integral to maintaining up-to-date OTA or timesheet records and ensuring compliance with financial policies. Follow established policies, procedures, and management guidance. Manage the daily end to end OTA activities ensuring timeliness and meeting all required SLA. Work closely with the team, team lead/manager and relevant offshore and onshore teams within OTA Tower in reaching goals and accomplishing the team vision. Responsibilities & Duties Accurately post and process the missing timesheet correction and time adjustments across regions in ERP systems. Process review and reconciliation of the missing timesheets a Investigate and OTA discrepancies such as missing timesheets, oracle adjustments. Collaborate with internal teams (e.g., PA, billing) and customers to address payment issues. Document and escalate unresolved discrepancies as needed. Assist in month-end close activities, including cash reconciliation and reporting. Generate and analyze accounts receivable reports to identify trends or irregularities. Support audits by providing relevant payment and cash application records. Identify opportunities to improve cash application processes and contribute to the implementation of best practices. Work with IT and finance teams to optimize system functionalities for cash application. Act as a point of contact for customer payment inquiries and related issues. Coordinate with treasury and bank teams for payment-related clarifications Qualifications Bachelors degree in accounting/finance or equivalent relevant courses. 4+ years of relevant professional experience in cash application Advanced knowledge and understanding of accounting standards and procedures and internal controls. Proven experience as a cash applications or similar role Excellent skills in investigating/researching payment history/details Knowledge of billing procedures and collections Proficiency knowledge of MS Office and databases Comfortable working with targets Patience and ability to manage stress Able to handle difficult or irate stakeholders Problem-solving skills Very keen to details Ability to work independently and contribute to broader team objectives Ability to multitask and manage time amid multiple deadlines Additional Information Strong analytical and problem-solving abilities Interpersonal skills to communicate effectively with a wide range of positions within the organization. Good verbal and written communication skills; able to communicate in a clear, constructive, and professional manner. Strengthen relationships by creating and maintaining communication with internal/external stakeholders and/or team members; understand needs, resolve issues, and meet expectations. Cultural adaptability to cater clients in different regions. Actively look for ways to improve current process and ways of working Team player Amendable to work extended working hours on critical days (e.g. fiscal month end/quarter end/year end), Region Holidays and Weekends as needed.

Serves as lead engineer on mid- to large size projects. Provides specialized technical input to studies and design for staff's specific area of expertise. Approves and signs off on work. Provides technical expertise for studies and design efforts. Presents complex technical solutions to clients. Performs quality control reviews of work developed by others. Participates in development of technical proposals. Provides estimates for the engineering budget and schedule to meet requirements on large projects.

Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision.

This role will be responsible for performing the end-to-end processes of billing which includes invoice creation & credit note cancellation servicing at least one or more region. Responsibilities & Duties Collaborate with internal/external stakeholders to ensure invoices are submitted to the clients timely and accurately. Distribute invoices to external clients through various distribution platforms e.g. mail, email, and client portal uploads. Respond to inquiries and escalate issues and concerns to the Team Lead for timely resolution. Participate in governance meetings with Operations Team and/or clients. May perform other moderately complex periodic and adhoc tasks as assigned by the Billing Team Leader or Billing Manager. Address critical issues and recommend resolutions to the Team Lead within the prescribed turn-around time. Propose alternatives in identified issues and assist in investigating and in resolving common and unusual issues. Perform transition-related activities such as process training & desktop procedures creation. Contribute in various and simultaneous process improvement initiatives to streamline processes and improve customer experience. Participate in audit-related activities. Support the Team Lead in report preparation by providing analysis and recommendation within established guidelines and procedures. Contribute specialized expertise to different assigned projects and may provide key updates to Team Lead and Manager. Assist in process trainings and knowledge transfers for new hires and may perform peer reviews as needed. Perform various billing tasks in compliance with service level agreement, process, policies, and procedures. Manage complex billing transactions and perform quality review of invoices. Monitor assigned projects and collaborate with Stakeholders to ensure invoices are submitted to the clients timely and accurately. Assess identified issues and collate documentation to assist in investigating and in resolving common and recurring issues Maintain the SOP/DTP of current processes and incorporate documentation updates as required. Assist junior team members to address process related concerns. Qualifications Bachelors degree in finance & accounting or any Business-related course. 4-5 years of relevant professional experience in Billing, Accounts Receivable, or Order-to-Cash. Excellent communications skills in both written and spoken English. Intermediate to Advanced proficiency in MS Applications (Word, Excel, Outlook, PowerPoint) and Adobe application. Advanced knowledge and understanding of accounting standards and procedures and internal controls. Experience working with ERP, i.e. Oracle Systems or SAP is preferred. Previous experience in process migration/transition is preferred. Experience working in Shared Services or BPO is preferred. Additional Information Ability to effectively communicate and collaborate within a varied audience and internal and external customers. (Communication) Ability to maintain good customer relationship with the ability to initiate ways to improve customer support customer experience (Customer Service) Ability to be thorough and meticulous in completing assigned tasks and with the ability to propose ways to prevent or eliminate errors, discrepancies & issues. (Attention to Detail) Ability to identify and resolve moderate and complex issues by applying best practices and technical expertise and may recommend solutions for unique scenarios. (Problem Solving) Ability to work in fast-paced environment and maintain efficiency and productivity while adjusting to changes in work structure, process, and requirements. (Adaptability)

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Qualifications Minimum Requirements Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Overall 7+ years of work experience is preferred.