Job Title: Bus Driver Company: Velmurugan Heavy Engineering Industries Pvt Ltd Location: Sengipatti, Thanjavur Employment Type: Full-Time Job Description: We are looking for an experienced and responsible Bus Driver to transport employees safely to and from our facility. Key Responsibilities: Safely operate the company staff bus on assigned routes. Follow all traffic and company safety rules. Conduct daily vehicle checks and report any maintenance issues. Maintain cleanliness and basic upkeep of the vehicle. Ensure timely pickup and drop of employees. Requirements: Valid Heavy Vehicle Driving License . Minimum 5 years of experience driving heavy vehicles or staff buses. Good knowledge of traffic rules and road safety. Physically fit and punctual. Willing to work in shifts, if required. Direct Walk-in Interview: Venue: Velmurugan Heavy Engineering Industries Pvt Ltd, SF No: 90-95, Trichy - Tanjavur Expressway NH 83, Near Yagappa International Residential School Sengipatti, Thanjavur, Tamil Nadu 613402, Time: 10 am onwards Note: Bring original license, ID proof, and experience certificates Job Type: Full-time Pay: From ₹20,000.00 per month Benefits: Health insurance Leave encashment Provident Fund Schedule: Day shift Work Location: On the road Expected Start Date: 11/06/2025
Job Title: Bus Driver Company: Velmurugan Heavy Engineering Industries Pvt Ltd Location: Sengipatti, Thanjavur Employment Type: Full-Time Job Description: We are looking for an experienced and responsible Bus Driver to transport employees safely to and from our facility. Key Responsibilities: Safely operate the company staff bus on assigned routes. Follow all traffic and company safety rules. Conduct daily vehicle checks and report any maintenance issues. Maintain cleanliness and basic upkeep of the vehicle. Ensure timely pickup and drop of employees. Requirements: Valid Heavy Vehicle Driving License . Minimum 5 years of experience driving heavy vehicles or staff buses. Good knowledge of traffic rules and road safety. Physically fit and punctual. Willing to work in shifts, if required. Direct Walk-in Interview: Venue: Velmurugan Heavy Engineering Industries Pvt Ltd, SF No: 90-95, Trichy - Tanjavur Expressway NH 83, Near Yagappa International Residential School Sengipatti, Thanjavur, Tamil Nadu 613402, Time: 10 am onwards Note: Bring original license, ID proof, and experience certificates Job Type: Full-time Pay: From ₹20,000.00 per month Benefits: Health insurance Leave encashment Provident Fund Schedule: Day shift Work Location: On the road Expected Start Date: 11/06/2025
Job title - Safety Engineer Department name - Safety Reporting to Head – QHSE Purpose To ensure a safe working environment by implementing and enforcing safety procedures, conducting risk assessments regularly, and providing training to employees to achieve zero harm in all processes of an organization. Tasks / Roles and Responsibilities 1. Ensuring adherence to all safety guidelines, policies, and procedures related to heavy fabrication processes, including welding, cutting, lifting, and material handling. 2. Identifying potential hazards in the workplace, evaluating risks associated with various fabrication activities, and developing/implementing control measures. 3. Creating and updating safety policies, procedures, and training programs to address specific hazards and ensure a safe working environment. 4. Educating employees on safe work practices, hazard identification, emergency procedures, and the proper use of safety equipment. Conducting thorough investigations into accidents and near misses, determining root causes, and implementing corrective actions to prevent future occurrences. 5. Keeping accurate records of safety training, inspections, audits, incidents, and corrective actions. 6. Staying up-to-date on relevant safety regulations and ensuring the company complies with all applicable laws and standards. 7. Ensuring safe lifting and rigging procedures are followed during material handling and equipment movement. 8. Ensuring all equipment is properly maintained, inspected, and used according to manufacturer guidelines 9. Developing and implementing emergency response plans, conducting drills, and ensuring employees are prepared to respond to various emergencies. 10. Conducting regular safety audits and inspections to identify potential hazards and ensure compliance with safety regulations Job requirements (education, experience, additional qualifications) Education : · Bachelor’s degree / ME Industrial safety/ B.Sc. Fire and safety / ADIS, Diploma in industrial fire and safety. · NEBOSH IGC and IOSH are preferred · Mechanical Engineering degree is an added advantage Experience: Minimum 5 years of experience in industrial safety management system and Legal compliances related to the TN factories act and TNPCB norms Mandatory Skills: · Critical job risk assessment for heavy manufacturing · Knowledge about 5s and basic firefighting techniques · Knowledge of the audit of ISO 45001 and ISO 14001. Preferred Skills: · Contract management safety. · ESG motive and implementation · Energy management KPIs: · Low LTI ( Loss time injury) / Low TRIR ( Total reportable incident rate) · Zero accidents and Zero near misses · On-time documentation · No NC/Observations on Audits concerning safety · Records as per the legal requirements Interested candidates, please share your updated Resume with careers@velmurugan.in Job Type: Full-time Pay: From ₹30,000.00 per month Benefits: Provident Fund Schedule: Day shift Supplemental Pay: Yearly bonus Work Location: In person Expected Start Date: 07/07/2025
Job title: Draftsman - Mechanical Experience: Minimum 2 to 5 years in a fabrication or heavy engineering environment Education: Diploma/BE/BTech - Mechanical Engineering Work Location: Thanjavur, Tamil Nadu (Local candidates preferred) Purpose To support the design and production teams by preparing accurate 2D/3D fabrication drawings, layout plans, and detailed assembly drawings for pressure vessels, storage tanks, structural steel, and skid-mounted packages in compliance with relevant codes and client requirements. Tasks / Roles and Responsibilities Prepare 2D and 3D fabrication drawings, general arrangement (GA) drawings, and layout plans for heavy engineering components, including pressure vessels, storage tanks, skids, and structural assemblies. Generate detailed shop drawings and Bill of Materials (BOM) for production use. Create and modify models using AutoCAD, SolidWorks, and PV Elite for pressure vessels and structural elements. Perform basic simulation and structural checks using STAAD.Pro as required. Revise drawings based on design changes, production feedback, or site modifications. Ensure all drawings comply with ASME, IS, and client-specific codes and standards. Maintain drawing records, revision history, and support documentation. Coordinate with design, production, quality, and procurement teams for smooth project execution. Job requirements (education, experience, additional qualifications) Education : Diploma / B.E. / B.Tech in Mechanical Engineering or a related discipline. Experience: Minimum 2–5 years of experience in a drafting/design role in a fabrication or heavy engineering environment. Mandatory Skills: Hands-on experience with AutoCAD and SolidWorks. Working knowledge of PV Elite and STAAD.Pro. Good understanding of fabrication practices, GD&T, welding symbols, and material standards. Familiarity with ASME Section VIII, IS 2825, IS 800, and MBMA standards. Ability to read and interpret technical drawings and engineering documents Preferred Skills: Experience in oil & gas, process, or power sector design. Exposure to shop floor practices and inspection procedures. Communication skills in Tamil and English. Capability to interact with clients, vendors, and internal departments. Work Location: Thanjavur, Tamil Nadu (Local candidates preferred) Interested candidates may share their resume to [email protected] Job Type: Full-time Pay: Up to ₹25,000.00 per month Benefits: Provident Fund Work Location: In person Expected Start Date: 04/08/2025
Job title: Draftsman - Mechanical Experience: 2 to 5 years in a fabrication or heavy engineering environment Education: Diploma/BE/BTech - Mechanical Engineering Work Location: Thanjavur, Tamil Nadu Purpose To support the design and production teams by preparing accurate 2D/3D fabrication drawings, layout plans, and detailed assembly drawings for pressure vessels, storage tanks, structural steel, and skid-mounted packages in compliance with relevant codes and client requirements. Tasks / Roles and Responsibilities Prepare 2D and 3D fabrication drawings, general arrangement (GA) drawings, and layout plans for heavy engineering components, including pressure vessels, storage tanks, skids, and structural assemblies. Generate detailed shop drawings and Bill of Materials (BOM) for production use. Create and modify models using AutoCAD, SolidWorks, and PV Elite for pressure vessels and structural elements. Perform basic simulation and structural checks using STAAD.Pro as required. Revise drawings based on design changes, production feedback, or site modifications. Ensure all drawings comply with ASME, IS, and client-specific codes and standards. Maintain drawing records, revision history, and support documentation. Coordinate with design, production, quality, and procurement teams for smooth project execution. Job requirements (education, experience, additional qualifications) Education: Diploma / B.E. / B.Tech in Mechanical Engineering or a related discipline. Experience: Minimum 2–5 years of experience in a drafting/design role in a fabrication or heavy engineering environment. Mandatory Skills: Hands-on experience with AutoCAD and SolidWorks. Working knowledge of PV Elite and STAAD.Pro. Good understanding of fabrication practices, GD&T, welding symbols, and material standards. Familiarity with ASME Section VIII, IS 2825, IS 800, and MBMA standards . Ability to read and interpret technical drawings and engineering documents Preferred Skills: Experience in oil & gas, process, or power sector design. Exposure to shop floor practices and inspection procedures. Communication skills in Tamil and English. Capability to interact with clients, vendors, and internal departments. Work Location: Thanjavur, Tamil Nadu (Local candidates preferred) Interested candidates may share their resume at careers@velmurugan.in
Job Title: Machining In-Charge Experience: Minimum 10 years of experience in heavy engineering/fabrication industries Education: Diploma or Bachelor’s Degree in Mechanical Engineering or Production Engineering Work Location: Thanjavur, Tamil Nadu Purpose To manage the complete machining operations both in-house and outsourced, ensuring timely delivery, quality compliance, cost control, and process optimization. This includes managing machine shop manpower, machine utilization, vendor development, drawing interpretation, tool selection, and stage inspections in a heavy engineering manufacturing environment Roles and Responsibilities 1. Outsourcing Responsibilities · Identify and develop competent machining vendors for heavy engineering components. · Evaluate vendor capabilities jointly with QA/QC team. · Get quotations, perform comparative analysis, and negotiate machining component rates. · Plan and control outsourcing lead time within budget. · Maintain comprehensive records of outsourced components. · Ensure quality adherence to drawings/QAP during the outsourced machining process. · Expedite outsourced machining and fabrication components for timely delivery. · Conduct stage inspections and validate vendor quality as per standards. · Review and optimize machining vendor performance periodically. 2. In-House Machining Responsibilities · Plan manpower and allocate work effectively across all current and future machines: VTL Lathe Radial Drilling Machine Magnetic Drilling Machine (Core Cutter) Universal Drilling Machine Band Saw Cutting Machine Tube / Pipe Bending Machine · Monitor and control operator overtime judiciously. · Ensure preventive maintenance and functionality of all machines with the Maintenance Department's support. · Ensure timely calibration and maintain calibration records of machines, tools, and instruments. · Identify cost-effective sources for spares, tools, and critical consumables. · Support machine installation, including foundation and civil work coordination for new machines. · Maintain updated machine manuals and tooling catalogs. · Oversee adherence to dimensional tolerances and machining standards. · Guide jig/fixture/template preparation for complex machining processes. 3. Design Interpretation & Tolerancing Standards Responsibilities · Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accurate interpretation and execution of machining drawings. · Review and implement ISO 2768 standards for general tolerances in CNC machining processes. · Train and guide the machining team on the principles of tolerancing and design intent to reduce ambiguity in part manufacturing. · Coordinate with the design and QA/QC teams to resolve tolerance-related issues and ensure manufacturability. · Ensure all machining processes align with industry-standard tolerance guidelines and dimensional quality requirements. Job requirements (education, experience, additional qualifications) Education: Diploma / Bachelor’s Degree in Mechanical Engineering or Production Engineering Experience: Minimum 10+ years in a machining role within heavy engineering/fabrication industries, with exposure to both outsourcing and in-house machine shop operations. Mandatory Skills: · Strong knowledge of machining processes and tools. · Ability to interpret technical drawings, GD&T, and tolerance fits. · Vendor development and rate negotiation skills. · Experience with stage inspections and QAP implementation. · Knowledge of ERP systems, Excel, and Word. · Familiar with ISO procedures and safety standards. Preferred Skills: · Exposure to quality control methods. · Understanding of welding and fabrication interface requirements. · Good leadership and team coordination skills. · Vendor networking in the local industrial area. Interested candidates may share their resume with careers@velmurugan.in
📢 We are hiring! Position: Draftsman – Mechanical Location: Thanjavur, Tamil Nadu (Local candidates preferred) Experience: Fresher or Min. 2 years in Fabrication/Heavy Engineering Qualification: Diploma / BE /B.Techh – Mechanical Skills Required: ✔️ AutoCAD & SolidWorks ✔️ PV Elite & STAAD.Pro ✔️ Fabrication, GD&T, Welding Symbols, Material Standards ✔️ Knowledge of ASME Sec VIII, IS 2825, IS 800, MBMA 📞 Interested candidates can reach out at 98427 56547
Job Opening – Draftsman (Mechanical) Position: Draftsman - Mechanical Education: Diploma/BE/BTech - Mechanical Engineering Skills Required: AutoCAD & SolidWorks Certification Experience: Freshers Preferred Location: Thanjavur (Local candidates preferred) Purpose To support the design and production teams by preparing accurate 2D/3D fabrication drawings, layout plans, and detailed assembly drawings for pressure vessels, storage tanks, structural steel, and skid-mounted packages in compliance with relevant codes and client requirements. Tasks / Roles and Responsibilities Preparing mechanical drawings and designs using AutoCAD & SolidWorks Supporting design team in fabrication and production drawings Ensuring accuracy and quality of drafting work Prepare 2D and 3D fabrication drawings, general arrangement (GA) drawings, and layout plans for heavy engineering components, including pressure vessels, storage tanks, skids, and structural assemblies. Generate detailed shop drawings and Bill of Materials (BOM) for production use. Create and modify models using AutoCAD, SolidWorks, and PV Elite for pressure vessels and structural elements. Perform basic simulation and structural checks using STAAD.Pro as required. Revise drawings based on design changes, production feedback, or site modifications. Ensure all drawings comply with ASME, IS, and client-specific codes and standards. Maintain drawing records, revision history, and support documentation. Coordinate with design, production, quality, and procurement teams for smooth project execution. Work Location: Thanjavur, Tamil Nadu (Local candidates preferred) Interested candidates may share their resume to [email protected] Job Type: Full-time Pay: From ₹15,000.00 per month Benefits: Provident Fund Work Location: In person Expected Start Date: 01/09/2025
We are Hiring – NDT Technician Industry: Heavy Engineering Manufacturing Work Location: Thanjavur, Tamil Nadu Position: NDT Technician Experience: Minimum 1–2 years Qualification: NDT Certification mandatory Key Responsibilities: Carry out NDT inspections (UT, MT, PT, etc.) as per quality standards Ensure defect identification and reporting in welding/fabrication components Maintain inspection records and support QA/QC activities Adhere to industry safety and quality procedures Requirements: ✔Min. 1–2 years of experience in NDT inspection ✔ Mandatory UT Level II certification ✔ Experience in the heavy engineering/fabrication industry preferred Work Location: Thanjavur, Tamil Nadu Interested candidates can apply with their updated CV to [email protected] / contact 98427 56547 Job Type: Full-time Pay: From ₹15,000.00 per month Benefits: Provident Fund Work Location: In person
We are Hiring – NDT Technician Industry: Heavy Engineering Manufacturing Work Location: Thanjavur, Tamil Nadu Position: NDT Technician Experience: Minimum 1–2 years Qualification: NDT Certification mandatory Key Responsibilities: Carry out NDT inspections (UT, MT, PT, etc.) as per quality standards Ensure defect identification and reporting in welding/fabrication components Maintain inspection records and support QA/QC activities Adhere to industry safety and quality procedures Requirements: ✔Min. 1–2 years of experience in NDT inspection ✔ Mandatory UT Level II certification ✔ Experience in the heavy engineering/fabrication industry preferred Work Location: Thanjavur, Tamil Nadu Interested candidates can apply with their updated CV to careers@velmurugan.in / contact 98427 56547 Job Type: Full-time Pay: From ₹15,000.00 per month Benefits: Provident Fund Work Location: In person
We are Hiring – NDT Technician Position: NDT Technician Industry: Heavy Engineering Manufacturing Experience: Minimum 2 years Qualification: NDT Certification mandatory Work Location: Thanjavur, Tamil Nadu Key Responsibilities: Carry out NDT inspections (UT, MT, PT, etc.) as per quality standards Ensure defect identification and reporting in welding/fabrication components Maintain inspection records and support QA/QC activities Adhere to industry safety and quality procedures Requirements: Minimum 2 years of experience in NDT inspection Mandatory UT Level II certification Experience in the heavy engineering/fabrication industry preferred Interested candidates can apply with their updated CV to careers@velmurugan.in / 98427 56547
Role Overview: As an NDT Technician at our Heavy Engineering Manufacturing company in Thanjavur, Tamil Nadu, you will be responsible for conducting NDT inspections such as UT, MT, PT, etc. in accordance with quality standards. Your role will involve identifying and reporting defects in welding and fabrication components, maintaining inspection records, and providing support for QA/QC activities. It is crucial to strictly adhere to industry safety and quality procedures to ensure the integrity of our products. Key Responsibilities: - Carry out NDT inspections (UT, MT, PT, etc.) as per quality standards - Ensure defect identification and reporting in welding/fabrication components - Maintain inspection records and support QA/QC activities - Adhere to industry safety and quality procedures Qualifications Required: - Minimum 2 years of experience in NDT inspection - Mandatory UT Level II certification - Experience in the heavy engineering/fabrication industry preferred If you meet the qualifications and are interested in this position, please send your updated CV to careers@velmurugan.in or contact 98427 56547.,
As a Crane Operator at Velmurugan Heavy Engineering Industries Pvt Ltd in Sengipatti, Thanjavur, you will be responsible for operating EOT (Electric Overhead Travelling) or mobile cranes in the heavy engineering manufacturing facility. Your key responsibilities will include: - Operating cranes to lift, move, and position heavy materials and equipment safely. - Following load charts and lifting plans accurately. - Conducting daily inspection and basic maintenance of crane equipment. - Adhering to all safety regulations and company procedures. - Coordinating with riggers and supervisors for efficient lifting operations. To qualify for this role, you must meet the following requirements: - Hold a valid Crane Operator License / Certification. - Have a minimum of 5 years of experience operating EOT or mobile cranes in an industrial setting. - Possess a good understanding of crane safety, load handling, and hand signals. - Be physically fit, alert, and safety-conscious. - Be willing to work in shifts if required. The company, Velmurugan Heavy Engineering Industries Pvt Ltd, offers benefits such as health insurance, leave encashment, and Provident Fund. The work schedule is in the day shift, with a yearly bonus provided. The work location is on the road, and the expected start date for this full-time position is 15/06/2025. If you are interested, you can attend the direct walk-in interview at the following venue: Velmurugan Heavy Engineering Industries Pvt Ltd, SF No: 90-95, Trichy - Tanjavur Expressway NH 83, Near Yagappa International Residential School Sengipatti, Thanjavur, Tamil Nadu 613402, Time: 10 am onwards Make sure to bring your original license, ID proof, and experience certificates.,
Position: NDT Technician Industry: Heavy Engineering Manufacturing Location: Thanjavur, Tamil Nadu Job Description We are looking for an experienced NDT Technician to join our Quality team. The ideal candidate must have hands-on experience in Ultrasonic Testing (UT) and hold valid NDT certifications. Candidates with PCN certification will be given added preference. Key Responsibilities Perform NDT inspections UT on welding and fabrication components as per applicable quality standards. Identify, interpret, and report defects accurately. Maintain detailed inspection records and support QA/QC documentation. Ensure strict adherence to safety, quality, and industry procedures. Assist in continuous improvement of inspection and testing processes. Requirements Minimum 2 years of experience in NDT inspection (with strong focus on UT Level II ). UT Level II certification is mandatory. PCN certification will be an added advantage. Experience in heavy engineering / fabrication industry preferred. Strong understanding of welding processes, codes, and standards. Qualification BE / B.Tech in Mechanical Engineering OR Diploma in Mechanical Engineering (DME) Interested candidates may share their updated CV to [email protected] or contact 98427 56547 . Walk-in Interview – NDT Technician Date & Time: 03 October 2025 (Friday) @ 10:00 AM Venue: Velmurugan Heavy Engineering Industries Pvt Ltd SF NO 90-95, Trichy–Thanjavur Expressway, National Highway 83, Sengipatti, Thanjavur – 613402 Landmark: Next to Gnanam School of Business Contact: 98427 56547 Website: https://velmurugan.in Job Type: Full-time Pay: From ₹25,000.00 per month Work Location: In person
We Are Hiring – Graduate Engineer Trainee (GET) - Mechanical Industry: Heavy Engineering Manufacturing Work Location: Thanjavur, Tamil Nadu Position: Engineer Trainee Job Description We are looking for Mechanical Engineering Freshers (2025 Batch) to join as Engineer Trainee in our Heavy Engineering Manufacturing industry. Eligibility: BE – Mechanical Engineering (2025 Passed out) Diploma – Mechanical Engineering (2025 Passed out) 70% and above preferred Local candidates will be given preference Key Responsibilities Learn and support production, quality, and engineering operations. Gain hands-on exposure in manufacturing, fabrication, and heavy engineering processes. Assist in process improvements, documentation, and technical problem-solving. Ensure adherence to safety and quality standards. Walk-in Interview : Date & Time: 03 October 2025 (Friday) @ 10:00 AM Venue: Velmurugan Heavy Engineering Industries Pvt Ltd SF NO 90-95, Trichy–Thanjavur Expressway, National Highway 83, Sengipatti, Thanjavur – 613402 Landmark: Next to Gnanam School of Business Contact: 98427 56547 Website: https://velmurugan.in Job Type: Full-time Pay: From ₹18,000.00 per month Benefits: Provident Fund Work Location: In person
Position: NDT Technician Industry: Heavy Engineering Manufacturing Location: Thanjavur, Tamil Nadu Job Description We are looking for an experienced NDT Technician to join our Quality team. The ideal candidate must have hands-on experience in Ultrasonic Testing (UT) and hold valid NDT certifications. Candidates with PCN certification will be given added preference. Key Responsibilities Perform NDT inspections UT on welding and fabrication components as per applicable quality standards. Identify, interpret, and report defects accurately. Maintain detailed inspection records and support QA/QC documentation. Ensure strict adherence to safety, quality, and industry procedures. Assist in continuous improvement of inspection and testing processes. Requirements Minimum 2 years of experience in NDT inspection (with strong focus on UT Level II ). UT Level II certification is mandatory. PCN certification will be an added advantage. Experience in heavy engineering / fabrication industry preferred. Strong understanding of welding processes, codes, and standards. Qualification BE / B.Tech in Mechanical Engineering OR Diploma in Mechanical Engineering (DME) Interested candidates may share their updated CV to careers@velmurugan.in or contact 98427 56547 . Walk-in Interview – NDT Technician Date & Time: 03 October 2025 (Friday) @ 10:00 AM Venue: Velmurugan Heavy Engineering Industries Pvt Ltd SF NO 90-95, Trichy–Thanjavur Expressway, National Highway 83, Sengipatti, Thanjavur – 613402 Landmark: Next to Gnanam School of Business Contact: 98427 56547 Website: https://velmurugan.in Job Type: Full-time Pay: From ₹25,000.00 per month Work Location: In person
Job Title: Machining In-Charge Experience: Minimum 10 years of experience in heavy engineering/fabrication industries Education: Diploma or Bachelor’s Degree in Mechanical Engineering or Production Engineering Work Location: Thanjavur, Tamil Nadu Purpose To manage the complete machining operations both in-house and outsourced, ensuring timely delivery, quality compliance, cost control, and process optimization. This includes managing machine shop manpower, machine utilization, vendor development, drawing interpretation, tool selection, and stage inspections in a heavy engineering manufacturing environment Roles and Responsibilities 1. Outsourcing Responsibilities · Identify and develop competent machining vendors for heavy engineering components. · Evaluate vendor capabilities jointly with QA/QC team. · Get quotations, perform comparative analysis, and negotiate machining component rates. · Plan and control outsourcing lead time within budget. · Maintain comprehensive records of outsourced components. · Ensure quality adherence to drawings/QAP during the outsourced machining process. · Expedite outsourced machining and fabrication components for timely delivery. · Conduct stage inspections and validate vendor quality as per standards. · Review and optimize machining vendor performance periodically. 2. In-House Machining Responsibilities · Plan manpower and allocate work effectively across all current and future machines: VTL Lathe Radial Drilling Machine Magnetic Drilling Machine (Core Cutter) Universal Drilling Machine Band Saw Cutting Machine Tube / Pipe Bending Machine · Monitor and control operator overtime judiciously. · Ensure preventive maintenance and functionality of all machines with the Maintenance Department's support. · Ensure timely calibration and maintain calibration records of machines, tools, and instruments. · Identify cost-effective sources for spares, tools, and critical consumables. · Support machine installation, including foundation and civil work coordination for new machines. · Maintain updated machine manuals and tooling catalogs. · Oversee adherence to dimensional tolerances and machining standards. · Guide jig/fixture/template preparation for complex machining processes. 3. Design Interpretation & Tolerancing Standards Responsibilities · Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accurate interpretation and execution of machining drawings. · Review and implement ISO 2768 standards for general tolerances in CNC machining processes. · Train and guide the machining team on the principles of tolerancing and design intent to reduce ambiguity in part manufacturing. · Coordinate with the design and QA/QC teams to resolve tolerance-related issues and ensure manufacturability. · Ensure all machining processes align with industry-standard tolerance guidelines and dimensional quality requirements. Job requirements (education, experience, additional qualifications) Education: Diploma / Bachelor’s Degree in Mechanical Engineering or Production Engineering Experience: Minimum 10+ years in a machining role within heavy engineering/fabrication industries, with exposure to both outsourcing and in-house machine shop operations. Mandatory Skills: · Strong knowledge of machining processes and tools. · Ability to interpret technical drawings, GD&T, and tolerance fits. · Vendor development and rate negotiation skills. · Experience with stage inspections and QAP implementation. · Knowledge of ERP systems, Excel, and Word. · Familiar with ISO procedures and safety standards. Preferred Skills: · Exposure to quality control methods. · Understanding of welding and fabrication interface requirements. · Good leadership and team coordination skills. · Vendor networking in the local industrial area. Interested candidates may share their resume with careers@velmurugan.in
You are being offered a role as a Graduate Engineer Trainee (GET) - Mechanical in the Heavy Engineering Manufacturing industry at Thanjavur, Tamil Nadu. As an Engineer Trainee, your main responsibilities will include: - Learning and supporting production, quality, and engineering operations. - Gaining hands-on exposure in manufacturing, fabrication, and heavy engineering processes. - Assisting in process improvements, documentation, and technical problem-solving. - Ensuring adherence to safety and quality standards. To be eligible for this position, you should have completed BE or Diploma in Mechanical Engineering in the 2025 batch with a preference for candidates who have scored 70% and above. Local candidates will be given preference. The company organizing a Walk-in Interview on 03 October 2025 (Friday) at 10:00 AM at the following venue: Velmurugan Heavy Engineering Industries Pvt Ltd SF NO 90-95, TrichyThanjavur Expressway, National Highway 83, Sengipatti, Thanjavur 613402 Landmark: Next to Gnanam School of Business Contact: 98427 56547 Website: [Velmurugan Heavy Engineering Industries Pvt Ltd](https://velmurugan.in) This is a full-time position with benefits including Provident Fund. The work location is in person.,
Job Title: Engineer - Draftsman Tasks / Roles and Responsibilities Create and update 3D models and 2D drawings using CAD software (SolidWorks/AutoCAD). Develop detailed drawings, including BOMs and fabrication drawings. Create fabrication-ready drawings, including dimensions, tolerances, weld symbols, and material specifications. Collaborate with production, quality teams to ensure feasibility and accuracy. Ensure adherence to GD&T, drafting standards, and internal guidelines. Support reverse engineering and continuous improvement activities. Optimize material usage and contribute to cost reduction through efficient designs. Analyze fabrication drawings to determine material requirements. Prepare nesting and cutting plans using software like OMNIWIN. Coordinate with procurement and production teams to ensure material availability and cutting feasibility. Optimize material usage and reduce scrap through intelligent nesting techniques. Update and maintain records of cutting plans and material usage reports. Ensure cutting plans are aligned with job priority, machine capacity, and delivery schedules. Implement continuous improvement in cutting operations through feedback and process analysis. Job requirements (Education, Experience, Additional qualifications) Education: B.E./B.Tech in Mechanical Engineering. Experience: 2+ years of experience in 3d model/Design/cutting plan preparation/nesting/Material Planning in fabrication, structural & heavy engineering industries. Mandatory Skills: Proficiency in SolidWorks, AutoCAD, and drafting standards. Strong understanding of GD&T (Geometric Dimensioning & Tolerancing). Knowledge of fabrication processes like welding, Rolling, bending, and machining. Strong knowledge of fabrication drawings and material standards. Understanding of CNC cutting processes (plasma, laser, oxy-fuel). Strong knowledge of raw material sizes and standard plate dimensions. Preferred Skills: Exposure to FEA/simulation tools (e.g., Solidworks Simulation). Basic project management and documentation skills. Experience in material optimization techniques. Exposure to ERP(Axpert) systems. Strong SolidWorks knowledge for drawing interpretation. Awareness of safety standards in material handling and cutting. Understanding of manufacturing and assembly constraints. EOHS - Awareness and participation in EOHS Programs / Initiatives Good knowledge on ISO 9001:2015 and basics on ISO 14001: 2015 & ISO 45001:2018 standards Mandatory Certification: Autocad, Solidworks Work Location: Sengipatti, Thanjavur, Tamil Nadu (Local candidates preferred) Both male and female candidates can apply. Interested candidates may submit their resumes to [email protected] or contact 98427 56547 for more information. Job Type: Full-time Pay: From ₹20,000.00 per month Benefits: Provident Fund Work Location: In person