We are Laxmi Organics Ltd looking candidate for Associate Manager Engineering (Instrumentation) based at Chiplun. Designation: Associate Manager Engineering (Instrumentation) Office Location: Chiplun Position description: To assist in project construction phase and operate & maintain instrumentation post project stabilization. Primary Responsibilities: • To assist project and contract team to install plant instrumentation in project scope. • To stabilize, operate and maintain instrumentation after completion of project. • Responsible to handle all project related activities like DCS commissioning, Field instrument erection, commissioning, and installation etc. • Implementation of capital projects with defining scope, cost estimate, selection, specifications, detail engineering documents, TBA, procurement of instruments and control systems. • Ensure availability of critical spares along with monitoring spares inventory Carrying out in house & external calibration of instruments as per schedule for proper functioning. Carry out & maintain safety interlocks & controlling instruments in working • Complete shutdown instrument maintenance within time limit. • Carry out instrument preventive maintenance as per schedule. • Check all received spares as per specification. • Check logbook & decide jobs on priority basis. • Carry out shutdown, break down, & preventive maintenance as per schedule to reduce plant break down. • Responsible for smooth operation of instruments. • Taking plant round & check instrument & write observation in daily report book. • Inspection & checking of gas detector system as per schedule. • Responsible to indent & inspect material as per specification. • Responsible to maintain daily logbook. • Responsible for monitoring of flammability & oxygen percentage in the work environment as per schedule. • Authorized to check safety of the instrument, if not stop the job • Implementation of operational controls as per requirement of the operation / activity • Ensure to follow safety norms to achieve zero accidents. • Report any near miss /incident or any non-compliance. • To participate in Root Cause Analysis of Various safety and process safety incidents, Monitor and ensure implementation of CAPA (Corrective Actions & Preventive Actions) • To Support Various Process safety and Responsible Care Initiatives • Report non-conformities and implementation of corrective actions • corrective actions to eliminate recurrence of incident etc. • To implement EHS systems procedures and practices as per ISO 9001, ISO 45001 and ISO 14001 & Responsible Care Management System. • To monitor and control project budget WBS elementwise. • To plan, monitor and control R&M Budget. • Look out all projects field instruments, DCS, PLC, SCADA erection, installation, and commissioning. Educational qualifications preferred Category: Bachelor's Degree Field specialization: Instrumentation & Control Degree: Bachelor of Engineering - BE, Bachelor of Technology - BTech Required work experience Industry: Chemical/Petrochemical Required Knowledge: Emerson/ Yokogawa DCS knowledge is must. Understanding of PLC, SCADA system. SAP-PM Module. Knowledge New instruments installation, green field projects, Maintenance, calibration, and ISO documentation of all Instrument Equipments is must. If you are interested for this positions, kindly share your CV on below email id. Email ID: viddhi.kharwa@laxmi.com/Telephone No: 91-22-4910444-ext.513

Laxmi Organic Industries Limited. We are chemical manufacturing industry, looking for candidates interested in Technician - Engineering (Mechanical) for Chiplun, Maharashtra. Job Title: Technician - Engineering (Mechanical) Group Company: Viva Life sciences Private Limited Designation: Technician - Engineering (Mechanical) Office Location: Chiplun. Position description: To identify and develop local vendors for spares and service support for the equipment such as Reactor, GLR, Heat Exchanges, Vacuum systems, pumps, Air compressor, DG srt, Chilling system, Brine system etc. Primary Responsibilities: Strategic: • To assist project and construction team to provide required support to refurbish/repair equipment. Operational: Focus & Action on Last Shift Pending issue To carry out routine maintenance work. Regular Maintenance. activity related to product changeover Pipeline & Hose connection activity To sustain 5S and TPM activity in workshop area. To report unsafe activities/ unsafe conditions to superiors To report any abnormality of equipment for predictive maintenance Marking and cutting of nonstandard size gaskets To ensure work area housekeeping after completion of job Chlorine, Ammonia toner changing work. Pipeline strainers, filters cleaning Focus & Action on Major Breakdown To carry out plant round(in designated focus area) to ensure smooth running of equipments. Preventive Maintenance of Equipments In-house repairing of graphite equipment In-house repairing of damaged graphite blocks Repairing of glass lined equipment. To report unsafe activities/ unsafe conditions to superiors To report any abnormality of equipment for predictive maintenance Marking and cutting of non-standard size gaskets To sustain 5S and TPM activity in workshop area. To ensure work area housekeeping after completion of job SRV calibration work Additional Responsibilities: Reporting Team Reporting Designation: Senior Manager - Engineering (Mechanical) Reporting Department: Engineering (MANF02) Educational qualifications preferred Category: Diploma Field specialization: Mechanical Degree: Diploma Academic score: Institution tier: Required Certification/s: Required Training/s: Required work experience Industry: Chemical, petrochemical industry Role: Years of experience: 5-7 Years in Chemical, Petrochemical Industry Required Knowledge: Knowledge of operations & maintenance of plant equipments such as MSGL Reactor, SS Reactor, Vacuum System, Centrifuge, ANF, Dryer, Centrifugal Pump, Metering Pumps, Air Blower, Heat Exchanger, Distillation Column, WHR System, MEE etc.. Knowledge of SAP-PM Module. Please note - Candidates should either be pursuing or willing to pursue a Diploma in Mechanical Engineering. If you are interested kindly share your cv on below email id. Email Id: viddhi.kharwa@laxmi.com Telephone no: 91-22-4910444-ext.513

Laxmi Organic Industries Limited. We are looking for candidates interested in Technical Associate-Quality for Chiplun. Job Title: Technical Associate-Quality Department: Quality Control/ Quality Assurance Location: Lote, Chiplun. Job Purpose Analysis of Raw material, water sample, Packing material In-process & Finished products Role and Responsibilities Operational: Daily analysis of water, In-process, Daily Finished product sampling and analysis Daily sampling of RM, In-process, Finished product. Dispatch of finished product dispatches of tanker, drum, bags sampling and analysis. Counter samples storage, retrieval, instruments cleaning Detection of abnormalities during analysis and report it to the concerned authority. Raw Material inspection, sampling and analysis. Result recording in SAP. HPLC and GC Data storage Packing material sampling and analysis. Checking of certificate of analysis Report any near miss /incident or any non-compliance To Support Various ISO, Process safety and Responsible Care Initiatives Responsible to compete any other assignment given by the senior. Deviation reporting and recording OOS reporting and recording. Required Knowledge (of any equipment / Tools and techniques / Software) GC, HPLC, UV, Titrimetric, Karl Fischer, Potentiometer, QESH Education Essential: M.Sc in Chemistry Preferred: M.Sc in Chemistry (Analytical, Organic, Inorganic) Experience Essential: 2-4 years in chemical industry Preferred: Experience in Pharmaceutical Industry If you are interested, kindly share your updated cv on below email id. Email Id: viddhi.kharwa@laxmi.com Telephone No: 91-22-4910444-ext.513

Laxmi Organic Industries Ltd. We are chemical manufacturing company, looking for candidates interested for Technical Associate - Quality Control for Dahej. Job Title: Technical Associate-Quality Control Department: Quality Control/ Quality Reporting to: Manager- Quality (QC) Functional Area: Quality Control Type of Job: Permanent Location: Dahej, Site IV Job Purpose: Analysis of Raw material, water sample, Packing material In-process & Finished products Role and Responsibilities Operational: Daily analysis of water, In-process, Daily Finished product sampling and analysis Daily sampling of RM, In-process, Finished product. Dispatch of finished product dispatches of tanker, drum, bags sampling and analysis. Counter samples storage, retrieval, instruments cleaning Detection of abnormalities during analysis and report it to the concerned authority. Raw Material inspection, sampling and analysis. Result recording in SAP. HPLC and GC Data storage Packing material sampling and analysis. Checking of certificate of analysis Report any near miss /incident or any non-compliance To Support Various ISO, Process safety and Responsible Care Initiatives Responsible to compete any other assignment given by the senior. Deviation reporting and recording OOS reporting and recording. Required Knowledge : GC, HPLC, UV, Titrimetric, Karl Fischer, Potentiometer, QESH Education Essential: M.Sc in Chemistry Preferred: M.Sc in Chemistry (Analytical, Organic, Inorganic) Experience Essential: 2-4 years in chemical industry Preferred: Experience in Chemical Industry Competencies / Skills Essential: Chemical reactions knowledge, Accuracy in analysis. Instrument breakdown knowledge Chemical hazardous control Communication Skills Quick Decision Observation If you are interested for this position, kindly contact on below email id. Email Id : ganesh.khandekar@laxmi.com Telephone no: 91-22-4910444-ext.511

Laxmi Organic Industries Limited. Role : Buyer Quantity : 2 Nos. Education : BE / DIPLOMA in Engineering Mechanical / Chemical / Electrical Experience : 3 to 5 Years Experience Industry : Manufacturing / B2B Keyworks : Preparation of RFQ/RFI, Comparative Statements, Sourcing, Negotiating, and Contracting, Knowledge of Complete P2P process, Preparation of Note for Approvals, Vendor Follow-ups, Payments follow-ups, Offer follow-ups. Skill Sets : Analytical skills, Maths skills, Handson to SAP, IT skills, E-Procurement Platforms If you are interested, kindly share your updated cv on below email id. Email Id: siddhi.pathak@laxmi.com Telephone No: 9125652023

Laxmi Organic Industries Limited. We are looking for candidates interested in Technical Associate-Quality for Dahej. Job Title: Technical Associate-Quality Department: Quality Control/ Quality Assurance Location: Dahej. Job Purpose Analysis of Raw material, water sample, Packing material In-process & Finished products Role and Responsibilities Operational: Daily analysis of water, In-process, Daily Finished product sampling and analysis Daily sampling of RM, In-process, Finished product. Dispatch of finished product dispatches of tanker, drum, bags sampling and analysis. Counter samples storage, retrieval, instruments cleaning Detection of abnormalities during analysis and report it to the concerned authority. Raw Material inspection, sampling and analysis. Result recording in SAP. HPLC and GC Data storage Packing material sampling and analysis. Checking of certificate of analysis Report any near miss /incident or any non-compliance To Support Various ISO, Process safety and Responsible Care Initiatives Responsible to compete any other assignment given by the senior. Deviation reporting and recording OOS reporting and recording. Required Knowledge (of any equipment / Tools and techniques / Software) GC, HPLC, UV, Titrimetric, Karl Fischer, Potentiometer, QESH Education Essential: M.Sc in Chemistry Preferred: M.Sc in Chemistry (Analytical, Organic, Inorganic) Experience Essential: 2-4 years in chemical industry If you are interested, kindly share your updated cv on below email id. Email Id: siddhi.pathak@laxmi.com Telephone No: 9125652023

Laxmi Organic Industries Limited. We are looking for candidates, interested in Technical Associate - R&D for Mahape. Job Title: Technical Associate - R&D Department: R&D Reporting to: Manager/Sr. Manager -R&D Functional Area: Synthesis lab Location: Mahape, Maharashtra Job Purpose: As a part of finalised organisation policy, the organisation decided to develop the process for synthesis of different chemical intermediate and Speciality chemical intermediate/products. The core deliverables of these candidates will be 1) Develop process for the synthesis of new products/intermediate/speciality chemical intermediates/products. 2) Synthesize and Validate process for new products/intermediate. 3) Prepare efficient/advanced infrastructure for development and purification of new products and /intermediate. 4) Subsequent scale-up and tech-transfer to scale-up/projects /operations team. Role and Responsibilities Setting up and conducting experiments, including preparing samples, performing tests, and collecting data. Setting up the required set up (Fractional distillation) for purification of products. Troubleshooting technical issues that arise during experiments. Recording and organizing experimental data/observations and drawing conclusion in a laboratory information management system (LIMS) OR batch sheets. Analyzing data to identify the reaction trends and patterns. Preparing required reports based on experimental findings. Sharing experimental observations and discussing technical inputs with seniors. Co-ordinate with ADL team members for collection of analytical reports and record results in batch sheets. Maintaining and calibrating laboratory equipment. Performing routine maintenance and troubleshooting of equipment. Communicating technical information clearly and concisely. Should have knowledge of recovery and recycling techniques to make the process robust. Executing housekeeping of working area and lab equipment. Maintaining required spare availability of lab equipment for better uninterrupted performance. Ensuring compliance with safety regulations and procedures in the laboratory. Properly disposing of hazardous waste using required PPEs under the guidance of senior team members. Performing consecutive process Validation experiments to prove consistency and reproducibility and demonstration experiment to scale-up/operation/project team. Should be a part of team for demonstration of three consecutive batches at pilot/plant scale. Required Knowledge (of any equipment / Tools and techniques /Software) He should have sound knowledge in the process development of new products/intermediate/specialty chemical intermediates. He should have experience in handling of different chemistries like Chlorination, Bromination, nitration, hydrogenation, Diazotization, Grignard, sulphonation, fluorination etc. He should have knowledge of handling different gaseous reagents, pyrophoric reagents/catalysts. He should be aware of Chem-darw and Chem-sketch software. He should be aware of isolation of impurities by using column chromatography/flash chromatography. He should have sound knowledge in data interpretation. He should have skill to recovery and recycle of solvents and reagents. Knowledge to treat effluent streams and its control limits. Knowledge on chemical reactions and process hazard. Education & Experience Education Essential: Masters degree in chemistry Preferred: M.Sc. (Organic Chemistry) Experience Essential: Total 2-6 years of industrial work experience in process development of new products/intermediate/specialty chemical intermediates. Preferred: Minimum 2 years experience in process development of new products/intermediate/specialty chemical intermediates. Competencies / Skills Essential : Proficiency in relevant laboratory techniques and equipment. Strong analytical data interpretation and problem-solving skills. Strong organizational and time management skills. Good communication and interpersonal skills. Ability to work independently and as part of a team. Ability to work in the shifts and co-ordination with team members. Familiar with Chem-darw and Chem-sketch software. Preferred : Experience in process development of new products/intermediates. Experience/Exposure in the purification of liquid/solid product by fractional distillation/conventional technique. If you are interested, kindly share your updated cv on below email id. Email id: viddhi.kharwa@laxmi.com | Telephone No: 91-22-4910444-ext.513

Laxmi Organic Industries Limited We are looking for candidates interested in Technical Associate - Electrical for Dahej. Total Experience 6-8 years with Supervisory License Job Title: Technical Associate Electrical Department: Engineering Reporting to: Sr. Manager Electrical & Instrumentation Functional Area: Electrical Location: Dahej Site IV Job Purpose : Maintaining normal & optimum operation of the plant (field and panel) Role and Responsibilities Strategic : Responsible to prepare the relevant shut down activities & Carrying out the jobs as per requirement. Operational: To check the status of the following day to day. a. Power factor reading. b. Status of all the drives parameters in the panel. Ensure that the preventative maintenance of transformer, PCC, MCC,IMCC, Turbines & all electrical drives is carried out Ensure that the readings of MSEB meter are correct. Ensure DG Set always in healthy condition by taking trials & always be available during power failure. Prepare purchase requisition as per requirement. Complete QESH & RC activity like audit, incident & documentation within time. Responsible for evolution of daily power consumption & if deviations take corrective action. Responsible for Carrying out all activities by following safety norms. Responsible for execution of the work as per preventive maintenance schedule Ensure to follow safety norms to achieve zero accidents To participate in Root Cause Analysis of Various safety and process safety incidents, Monitor and ensure implementation of CAPA ( Corrective Actions & Preventive Actions) Reporting any near miss /incident or any non compliance To Support Various Process safety and Responsible Care Initiatives Implementation of operational controls as per requirement of the operation / activity Responsible to complete any other assignment given by the senior Knowledge of HT & LT breakers, relay coordination, Required Knowledge Awareness of consequences of departures from standard procedures QESH Education Essential: Diploma in Electrical Engineering Preferred: Experience Essential:6-8 yrs with Supervisory License If you are interested for this position, kindly share your updated cv on below email id. Email Id: viddhi.kharwa@laxmi.com Telephone No: 91-22-4910444-ext.513

Laxmi Organic Industries Limited. We are chemical manufacturing industries looking for candidates interested in Associate Manager - Engineering CPP Job Title: Associate Manager Engineering CPP Department: CPP Reporting to: General Mananger - CPP Functional Area: CPP Type of Job: Permanent Location: Dahej Site IV Job Purpose (why job exists / what it must achieve) To ensure smooth functioning and running of the CPP with designed Parameters. To maintain BTG & Its related auxiliaries in Operational & Healthy Condition. Role and Responsibilities Responsible for All Boiler, CHP, DM, Turbine Operation & Maintenance during shift To supervise & delegate Jobs to field operators, Fireman, Helpers to maintain all Boilers Physical round in CPP after shift taken over and observe abnormalities if any To check trends in DCS panel of critical parameters Ensure safety by monitoring safety equipment, identifying potential issues and taking appropriate steps to suspend operations and repair the problem To Maintain & operate the CPP efficiently within operating norms To Maintain 22 and 55 TPH FBC boiler along with TG through DCS panel Logging of all critical readings in Logbook To Maintain steam pressure as per load demand from process To Monitor & Maintain all deaerator parameters within specified range To Monitor & Maintain all water quality parameters within specified range To Monitor Condensate return & DM water consumption To Monitor chemical stock for Boiler To Monitor DM water quality To Monitor Bed Material stock for Boiler To Maintain housekeeping in Boiler area To monitor compressor for Boiler within specified range To maintain ash handling system in the boiler area To maintain ESP system in boiler area To carry out cleaning activities in boiler & prepare boiler for annual shutdown passing To carry out deaerator cleaning in annual shutdown passing To Monitor & Maintain Steam Trap & its functionality operating in Boiler area & steam Header To Monitor & maintain operation of CHP plant To Carry out TPM activities Repair Boiler related valves, Guages, Guage Glass and other boiler parts as needed. To Maintain various records and reports relative to steam plant operations Supervise team of assistant operators and mechanics by delegating repair, maintenance and monitoring tasks, scheduling jobs, providing appropriate instruction and giving constructive feedback on performance Operate valves and adjusts controls to set specified fuel feed, draft openings, water level, and steam pressure of boiler. Manage the boiler and other related machinery, ensuring it is always functional and safe Reporting of any abnormalities/operational deviations immediately to Reporting Manager To maintain inventory for boiler To maintain daily reports for Steam & power generation. Execution Of PM, BD, SD maintenance notification & orders through SAP To Monitor & maintain predictive maintenance of all Boiler critical equipment To Maintain equipment History Prepare Monthly reports for boiler utilities To maintain ISO & RC documentation Safety permit implementation To schedule & implement shut down activities as per plan & Timeline Measurement of fabrication bills & service bill clearance from SAP Maintaining equipment History Documentation of all the operation & maintenance records and preparing monthly maintenance reports Required Knowledge (of any equipment / Tools and techniques / Software) SCADA Software QESH Education & Experience Education Essential: B.E. Mech with BOE First Class Certificate Preferred: Experience of High Pressure AFBC boiler / Process Boiler / Waste Heat Boiler / Incinerator Operation along with 10 MW back pressure turbine. Experience Essential: 6-8 Years in CPP operations Preferred: BOE with 6-8 yrs in CPP of 10 MW unit Competencies / Skills Essential: Sound knowledge of BTG operations Knowledge of BTG Safety Alertness Knowledge of SAP Preferred: Critical thinking Communication Skills If you are interested for this position kindly share your updated cv on below email id. Email Id: ganesh.khandekar@laxmi.com. Telephone No: 91-22-49104444/ Extn. 513

Laxmi Organic Industries Ltd. We are chemical manufacturing company, looking for candidates interested for Technical Associate - Quality Assurance for Dahej. Job Title: Technical Associate-Quality (QA) Department: Quality Control/ Quality Assurance Reporting to: Sr.Manager-Quality (QA) Functional Area: Quality Assurance Type of Job: Permanent Location: Dahej, Site IV Job Purpose: Execution, implementation and review of QA procedures. Role and Responsibilities Operational: Online plant round for inspection of finished product packing and to identify gap as per IMS system. Area / Equipment cleaning visual inspection and packing clearance. Review of BMR & MFR for QA head approval. Its master and control. Issuance, receipt and review the batch manufacturing record (BMR) and change over cleaning record. Review of batch record and analytical record for release finished product batch release. Finished product label issuance and reconciliation. Assist during the internal /external audits. Preparation of Annual product quality review. Local / export dispatch labels /shipping mark review and provide clearance for labelling of dispatch consignment. Export / Local dispatch verification as per FG dispatch release checklist. Logging of deviations / OOS / customer complaint and Participate in investigation. Work with proactive approach to minimise OOS and customer complaints. Deviations / QA observation communication to concern manger and CAPA follow-up. Report any near miss /incident or any non-compliance. To Support Various ISO, Process safety and Responsible Care Initiatives Responsible to compete any other assignment given by the senior. Required Knowledge : IMS system, GMP, deviations management, Failure investigation, IPQA, QMS Documentation. Education Essential: M.Sc. in Organic / In-organic / Industrial Chemistry Preferred: M.Sc. Experience Essential: 4-5 years in chemical industry Preferred: Experience in Pharmaceutical Industry & Bulk drugs Competencies / Skills Essential: - In-process Quality Assurance (IPQA) knowledge, - QMS documentation skills - Team Player - Communication Skills - Quick Decision - Observation If you are interested for this position, kindly share your updated cv on below email id. Email id: viddhi.kharwa@laxmi.com Telephone no: 91-22-4910444-ext.513

We are looking candidate for Technical Associate-Instrument based at Dahej (Gujrat). Position description: To ensure & optimize smooth operation of all instruments. Role & responsibilities Strategic: Carrying out in house & external calibration of instruments as per schedule for proper functioning. Operational: Carry out & maintain safety interlocks & controlling instruments in working Complete shutdown instrument maintenance within time limit. Carry out instrument preventive maintenance as per schedule. Check all received spares as per specification. Check log book & decide jobs on priority basis. Carry out shutdown, break down, & preventive maintenance as per schedule to reduce plant break down. Responsible for smooth operation of instruments. Taking plant round & check instrument & write observation in daily report book. Inspection & checking of gas detector system as per schedule. Responsible to indent & inspect material as per specification. Responsible to maintain daily log book. Responsible for monitoring of flammability & oxygen percentage in the work environment as per schedule. Authorized to check safety of the instrument, if not stop the job Authorized to change faulty instruments in consultation with Dy. Manager- Instrument. Implementation of operational controls as per requirement of the operation / activity Guide the operators in implementation of QESH & RC systems. Ensure to follow safety norms to achieve zero accidents Report any near miss /incident or any non-compliance To participate in Root Cause Analysis of Various safety and process safety incidents, Monitor and ensure implementation of CAPA ( Corrective Actions & Preventive Actions) To Support Various Process safety and Responsible Care Initiatives Report non-conformities and implementation of corrective actions Responsible to complete any other assignment given by the senior Required Knowledge (of any equipment / Tools and techniques / Software) Field instruments, DCS, PLC, & SCADA single loop, duel loop control system Education & Experience Education Essential: Diploma in Instrumentation / Electronics & Communication Experience Essential:3-5 yrs Competencies / Skills Job Knowledge Innovation Observation. Communication skills Listening Motivation Team work. Promptness. Knowledge of erection & commissioning. if you are interested & your profile is suitable please share your updated resume on siddhi.pathak@laxmi.com/9125652023

Laxmi Organic Industries Limited. We are listed chemical manufacturing company looking candidates for Technical Associate - Manufacturing (Panel Operator) for Dahej. We are looking for candidates from Gujarat only. Designation: Technical Associate - Manufacturing (Panel Operator) Office Location: Dahej Position description: To ensure the smooth running of the production process Primary Responsibilities: Operational: Follow all the instructions as per the Standard operating procedure Ensuring that all the effluents are sent to ETP ( Effluent Treatment Plant) Monitoring and controlling all the process parameters safely Operate the DCS Ensure to follow safety norms to achieve zero accidents and zero breakdown To participate in Root Cause Analysis of Various safety and process safety incidents, Monitor and ensure implementation of CAPA (Corrective Actions & Preventive Actions) To Support Various Process safety and Responsible Care Initiatives Report any near miss / incident or any non compliance Responsible to complete any other assignment give by the seniors People Related Maintaining the communication between the Field Officer and the Shift Incharge Conduct the safety talk for the Contract labours and the helpers Conducting and Attending all the safety meetings and training programs Educational qualifications preferred Bachelor of Engineering - BE, Bachelor of Technology Btech- Chemical Engineering Experience: 4 to 6 years Required Certification/s:5 Basic of DCS, QESH Required Competencies: Knowledge of Basic chemistry Safety awareness Communication Skills Team work Knowledge regarding the process Observation Problem solving ability If you are interested for this positions, kindly share your CV on below email id. Email ID: viddhi.kharwa@laxmi.com Telephone No: 91-22-4910444-ext.513

Laxmi Organic Industries Limited. We are looking for candidates interested for Technical Associate - Turbine for Dahej. Job Title: Tech Associate Turbine Department: Engineering Location: Dahej Site IV Job Purpose Maintaining normal & safe operation of the Back pressure Turbine and its auxiliaries Role and Responsibilities Strategic: Responsible for operation and maintenance activity of Turbine and its auxiliaries from DCS and as well field. Operational: Responsible for safe operation of turbine and its auxiliaries. He should be well versed with the field activities and as well DCS operation of Turbine and its auxiliaries. Cold, warm and hot start ups of the turbine. Must be well versed with Turbine protection and interlocks. He must maintain both the DCS and field operations of the turbine. Maintain all the operational parameters as per the OEM. Maintain and check the quality of steam and condensate. Maintain and check the quality of the Turbine oil as per OEM standards. Maintain the Housekeeping and equipment cleaning of his area. Coordinate with SI and Maintenance dept in carrying out the Turbine activities. Maintain the log as per the shift requirement. Coordinate with SI and Boiler DCS in safe operation of the Turbine. Should involve in the shutdown activities of the turbine and its auxiliaries. Should be well versed with all the safety, protection and interlocks of turbine. Ensure the Zero leakage of steam, water and oil. Coordinate with other colleagues for shift smooth operation Ensure the maximum safe power generation maintaining all the parameters within the operating range. Should operate the equipments as per the standard SOP only. Do not bypass the protection and interlocks. Should have the knowledge of Turbine heat rate and efficiency. Required Knowledge Awareness of consequences of departures from standard procedures QESH Education & Experience Essential: Diploma in Mechanical Engineering Experience Essential: 6-8 yrs with Turbine field and DCS operation Preferred: Handled Siemens Back pressure turbine of 10 MW capacity Competencies / Skills Essential: Observation Communication skills Listening Teamwork Self-initiative. Job Knowledge Creativity Interpersonal skills Planning/organizing People Management Leadership Motivation Problem solving attitude If you are interested kindly share your resumes on below email id. Email Id: viddhi.kharwa@laxmicom Telephone No: 91-22-4910444-ext.513

We are chemical manufacturing company looking candidate for Technical Associate-R&D Synthesis Education & Experience M.Sc. (Chemistry) Preferred: Position / Job Title Technical associate- R &D -Synthesis Function Research & Development Reporting to Assistant Manager R & D Work Experience 3-5 years relevant Experience in R &D Key Responsibilities 1.Conduct Laboratory trials for development of new products. 2.Ensure Documentation of the Process developed and finding or any new discoveries that arise during the research work. 3.Submitting reports and write-ups in an efficient and timely manner. 4.Practicing and monitoring health and safety at all times, including correct handling, storage and disposal of all types of chemicals. 5.Ensure safety to achieve zero accident 6.Ensuring the housekeeping of the working area as per the GLP. Must knowledge of reaction: Chlorination Bromination, hydrogenation, nitration, fluorination, Must Equipment experience: Autoclave-Rotavapour If your are interested and your profile is suitable please share your CV on ganesh.khandekar@laxmi.com.

We are chemical manufacturing company looking candidate for Deputy General Manager - Logistics based at Dahej. Position description: Head of Site Logistics (DGM) ensures smooth logistics operations at site covering inbound / outbound TM, WM, Tank Farms, Tech material stores, filling, packaging operations etc. Roles & Responsibilities: Manage and oversee the daily operations of site logistics operations (bulk+packaged), including inbound / outbound TM, WM, Tank Farm operations, Tech Materials Management, Filling and Packing operations etc. All modes of transportation. Drive/lead implementation of group Supply Chain strategic initiatives on the site to improve the efficiency, reduce costs, and increase customer satisfaction. Acting as Subject Matter Expert, continuously Monitor, analyze and report site logistics performance and identify areas for improvement and implement corrective actions. Initiate and lead digital initiatives in Site Logistics operations Systematically monitor, evaluate and improve the performance of 3rd party service providers, contractors; build a robust process to manage 3PL/Contractors at site; handle non-conformance service issues; use regular audits and benchmarking techniques. Ensure compliance with all relevant regulations, including customs regulations, transportation regulations, and environmental regulations. Implement strong Transport and Distribution Safety procedures in line with Responsible Care Distribution code Manage and mentor a team of logistics professionals, providing guidance and support to ensure their success. Prepare and present reports to senior management on logistics performance, including metrics, trends, and forecasts. Primary Responsibilities: Expert knowledge of SAP OTC, TM, WM. Experience with international logistics, including customs regulations and international trade compliance. Education & Experience: Essential: Degree in Engineering + MBA (SCM /Ops) or equivalent by experience in Production, Bulk and Filling operations, having a high exposure into SCM, SLO process and information technology Preferred: CPIM / APICS certified Essential: 15 yrs+ Supply Chain Management, Logistics (Transportation / Warehousing / Site Logistics) in Chemicals manufacturing setup in India. Preferred: Experience in logistics procurement, operational vendor management, tank farm operations, handling of liquid bulk, gas, engineering stores in systems driven online environment. Production, process management in areas related to this job, Good knowledge of IT / automation process capabilities for site logistics operations Competencies / Skills: Essential: Expert understanding of site logistics and physical operations process Thorough understanding of Chemicals supply chain & logistics end-to-end processes Applied experience in end-2-end supply chain and/or site logistics process management. Applied continuous improvement methodologies & project management experience Preferably already gained project leadership experience Good knowledge on automation and technology Excellent communication, negotiation skills and conflict management Strong analytical and problem-solving thinking Initiative, pro-active, self-motivated Strong customer and service-oriented behavior People Management: Internal: Production Team Quality Control Team Marketing SOP Planner External Transporters Port Logistics If you are interested & your profile is suitable please share your cv on vishakha.jadhav@laxmi.com or call on 49104444 EXT 513

Role & responsibilities Coordination with Detailed engineering Consultant for Mechanical and Piping. Review Mechanical Data sheets for Rotating and Fabricated Equipment including Package items. Technical discussions with various disciplines like process, operations, technical services, civil, electrical, instrumentation for the finalization of the Enquiry specs of packages Review Piping, fittings, and valve Specification Checking and preparation/estimate of Bill of Material for piping & insulation. Review of mechanical design - general arrangement drawings, Nozzle orientation. Develop key engineering deliverables for mechanical and piping disciplines. Cost Estimation of Projects including Budgeting & scheduling of project mechanical equipment and piping system. Prepare Purchase Requisitions in SAP. Coordination with Contractor for Piping fabrication, erection and monitoring. Coordination with contractor for Equipment erection, installation and Alignment. Monitor the progress, update project status and path forward on weekly basis to project management team. Daily Planning and reporting of Contractor progress to PMO and Line manager. Participate in Project Meetings to resolve open technical issues. Checking the contractor bills of Mechanical, Piping and Insulation and recommending for approval. Participate in HAZOP. 3D Modelling and review with respect to maintainability, construability and operations & safety Develop Spare philosophy with plant maintenance and include in the scope of vendor. Expedite vendors to get deliveries of equipment & piping as per project schedule. Provide Pre-Commissioning and commissioning Support. Vendor documentation and handover of equipment and packages to maintenance department. Preferred candidate profile Should have a career journey in Site execution of Mechanical equipment, piping, etc in chemical/ petrochemical plants/projects in medium to large size projects. Project Coordination with DEC. Brownfield and Greenfield Project Experience must. Good planning and analytical skills Conversant with ASME ,TEMA, API , NFPA, OISD Codes and Standards, Hands-on with ERP SAP and procurement procedures Critical personality attributes viz. Good Leadership qualities, Interpersonal Skills. Should be able to work with team Good Communication skills

Role & responsibilities Generate process engineering data for various products by carryout Material & Energy balance along with Reaction, Heat & Mass transfer & Separation studies, drive efficiencies. Carryout Technology transfer for In-house developed molecule / Externally acquired technology. R&D-Validate new process, Suggestion for plant suitability, Witness R&D demo batches. Preparing Variable cost, as per R&D Technical package and its validation during piloting. Support during Piloting. Guide/Support operations team during piloting & commercial plant commissioning/stabilization, at various plant locations, after handover from project execution team. Prepare Basic Engineering Package & Detail Engineering Package. Generate useful Process engineering data from Piloting batches for scale up & commercialization of the new process & improvement of existing process. Carryout process simulation in Aspen plus for process designing & equipment sizing. Carryout HAZOP studies. Prepare Capex for the designated project. Co-ordination & tracking with various disciplines such as process, mechanical, civil, electrical instrumentation, throughout the project execution phase. Highlight areas of concern coming in way of completion of project. Coordination with Detail Engineering Consultant during detail engineering phase. Experience in process simulation in ASPEN Plus / HYSYS / ASPEN EDR Carryout thermal design of heat exchangers, hydraulics, distillation columns design, chilled water and chilled brine systems, vacuum systems. Interact with Vendors for equipment procurement, technical queries. Should have experience in selection of instruments and DCS. Preferred candidate profile Have understanding on fluorine-based chemicals. Have process design exposure in handling AHF & Specialty chemicals. Generation of Process Engineering & Scale up data / documents. Understanding of Process safety w.r.t AHF. Understand process simulation & use of Aspen Plus simulation tool. Basic Engineering & Detail engineering documents. HAZOP study, PSSR. Procurement Till Technical Bid Analysis stage and GAD approvals Pre-Commissioning and Commissioning, Batch Validation for Repeatability and Reproducibility.

Role & responsibilities Lead SAP S/4HANA On-Premise from a Basis perspective. Install, configure, and maintain SAP S/4HANA systems and related components (e.g., Fiori, HANA DB, SAP Gateway, Solution Manager). Perform daily SAP Basis administration for S/4HANA systems, including monitoring, backups, health checks, and log analysis. Proactive planning of hardware/system/patch etc upgrade for optimal performance of SAP system landscape Manage SAP HANA database performance, patching, and housekeeping activities. Apply SAP support packages, kernel upgrades, and system patches. Monitor and manage transport requests across SAP systems. Perform system refreshes, client copies, and support system copies. Manage users, roles, and authorizations in coordination with the internal team. Coordinate with functional and development teams for system performance issues and transport planning. Implement technical changes in non-production and production environments following change control procedures. Maintain and update technical documentation, including architecture diagrams, process documents, and landscape inventories. Ensure system security and compliance with audit policies and internal controls. Work with vendors or SAP support to resolve issues via OSS notes and service requests. Manage system copies, backups/restores, client copies, and transports. Perform SAP kernel upgrades, patching, support package installations, and system refreshes. Design and manage high availability (HA) and disaster recovery (DR) configurations as per business need Implement security best practices including SAP roles/authorizations, SSO, and SSL. Integrate third-party systems and ensure compatibility across all SAP components. Collaborate with SAP functional and development teams to support technical requirements. Create and maintain technical documentation, landscape diagrams, and standard operating procedures. Conduct root cause analysis and resolve Basis-related issues. Ensure compliance with SAP standards and system audit requirements. Administration of Redhat Linux environment for SAP Preferred candidate profile Bachelors degree in computer science, Information Technology, or related field. 8+ years of hands-on experience as an SAP Basis consultant. Deep expertise in HANA database administration and optimization. Strong knowledge of operating systems (Linux/UNIX), networking, and system virtualization. Proficiency with tools such as SAP Solution Manager, SAP Maintenance Planner, and SAP HANA Cockpit. Experience with SAP landscape management (LaMa) is a plus. SAP certifications (e.g., SAP Certified Technology Associate System Administration – SAP S/4HANA) are an advantage. Experience on Redhat Linux administration Added advantage if Experience with SAP S/4HANA upgrades or conversion projects. Knowledge of SAP BTP (Business Technology Platform) integration. Experience with hybrid deployments (cloud/on-premises landscapes). Migration from on premise to SAP RISE platform

Laxmi Organic Industries Limited. We are chemical manufacturing industries looking for candidates interested in Associate Manager Engineering (Boiler & Utility) Designation: Associate Manager Engineering (Boiler & Utility) Office Location: Chiplun Experience: 6 to 9 yrs Position description: To assist in project construction phase and operate & maintain utilities post project stabilization. Primary Responsibilities: • To assist project and construction team to install plant utilities in project scope. • To stabilize, operate and maintain utilities after completion of project. • Co-ordinate with OEMs and internal vendor for civil foundation, installation, Performance trial, Stabilization, Spare part management of all OSBL utilities. • To ensure all vendors follow safety norms set by an organization so that there will be zero incident during project execution and post stabilization phase. To carry TBT, To identify unsafe condition • To assist Utility Manager to implement EHS systems procedures and practices as per ISO 9001, ISO 45001 and ISO 14001 & Responsible Care Management System. • To co-ordinate with Utility Manager to ensure compliance of legal and other requirements through Compliance Management System as well as assessment & evaluation procedures • To furnish required technical input to develop PM Module for all utilities. To prepare AS-IS and TO-BE report containing details such as equipment technical specifications, criticality of equipmen • To co-ordinate with Sr. Manager Mechanical to prepare annual R&M Budget at equipment level, develop monitoring & control mechanism to ensure actual expenses limit within plan budget. • To initiate various energy conservation initiatives to optimize consumption of utilities such as steam, water, electricity, effluent and R&M expenses. • To add-on automation initiatives time to time to eliminate/minimize manual intervention in equipment operation & maintenance with the help of IOT, DCS control, Electronic monitoring devices etc. • Implementation of PSM system and check effectiveness of the same • To furnish required inputs to develop training module to upgrade technical, safety, financial effectiveness of down-line. • To assist Utility Manager to develop SOPs of equipment operation and Maintenance, 5S Plan, Mechanical integrity & Reliability Plan. • Preparation of MIS and Reports of Utility department. • To monitor and control project budget WBS element-wise. • To plan, monitor and control R&M Budget. • To assist in Liaisoning with the local statutory authorities such as DISH, CCOE, MPCB, IBR and maintain good Rapport • Provide technical inputs for conducting audits, Inspection and risk assessment studies such as HAZOP, work place risk assessments • Identification of Manpower required and deploy them accordingly Additional Responsibilities: Reporting Team Reporting Designation: Reporting Department: Engineering (MANF02) Educational qualifications preferred Category: Bachelor's Degree Field specialization: Mechanical Engineering Degree: Bachelor of Engineering - BE, Bachelor of Technology - BTech Academic score: Institution tier: Required Certification/s: Required Training/s: Required work experience Industry: Role: Years of experience: Key Performance Indicators: Required Competencies: Required Knowledge: Operation & Maintenance of utilities such as Boiler, Chilling System, Compress Air System, PSA Nitrogen System, DG Sets, Cooling Tower etc. MIQA and Reliability Engineering. SAP-PM Module. IOT and other Automation technologies used in utility maintenance. If you are interested for this position kindly share your updated cv on below email id. Email Id: ganesh.khandekar@laxmi.com. Telephone No: 91-22-49104444/ Extn. 513

We are looking for a candidate for the position of General Manager- Engineering , based at Mahad, Maharashtra . Job Purpose: To lead the Engineering function of LOIL Mahad Cluster. To ensure smooth & cost-efficient maintenance activities of all Engineering sub functions like Utility, Mechanical, Electrical, Instrumentation etc to ensure maximum uptime of the plants Role and Responsibilities Planning and effecting predictive & preventive maintenance schedules through SAP with proactive steps to reduce the down time of plant & utility equipment to increase machine up time & equipment reliability. Conversant with MTTR, MTBF processes. Proactively identifying the areas of obstruction / breakdowns and taking steps to rectify the equipment through application of troubleshooting tools. Taking corrective measures for process enhancement Preparing annual maintenance budget and adhering to the budget with proper tracking mechanism Compliance and documentation for ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007, OMS and PSM checklist Carrying out advance planning for resource mobilization, manpower deployment and rendering technical support; ensuring the execution of site projects within time, cost & budgetary parameters Anchoring on-site project activities to ensure completion of project within the time & cost parameters and effective resource utilisation to maximise the output Leading, mentoring & monitoring the performance of the team members to ensure efficiency in process operations and meeting of individual & group targets. Creating and sustaining a dynamic environment that fosters development opportunities and motivates high performance amongst team members Ensure timely statutory compliance of Engineering activities. Required Knowledge : CPP/Process boiler, Chilling system, Cooling towers, Glass lined Equipment, Filters, dryers, furnace. Education: BE / B.Tech. Mechanical Experience: Essential: Min 16 years Competencies / Skills Exposure to TPM, Good engineering practises, Reliability, Sustainability Brown field projects. Having Knowledge of SAP MM, PM (Planning, Scheduling) modules and permit systems based on SAP. Experience in handling site projects, Good negotiation skill Keen interest in project management, tendering, business development and executive relationship. Administrative skills of handling multiskilled manpower & material planning for execution of work. An effective communicator with excellent relationship, management skills and strong analytical, problem solving & organizational abilities. Preferred: Employee with below competencies Experience in hazardous chemical batches& continuous processes. Must have handle different type of MOC mainly, glass lined, graphite and SS. Exposure to the maintenance of various Equipments like CSTR, PFR, crystallizers, various filters and dryers Exposure to various utilities mainly CPP, process boilers, chilling systems with various brine solutions. Basic Business Excellence activities like 5S, Kaizen, Six Sigma, Lean Management, TPM, TQM, Energy Conservation etc. People Management: Eternal: Engineering Team, Customer Departments, Unit Leadership, SLT. External: Vendors, Govt. Agencies If you are interested and meet the eligibility criteria, please share your updated resume at vishakha.jadhav@laxmi.com or contact us at 022 49104444, Ext. 513 .