9 Jobs in Phaltan, Maharashtra

DESCRIPTION Performs skilled activities which support manufacturing business needs. Selects and uses appropriate tools, machinery, and specialty equipment. Learns and understands the protocols of working safely with electricity and other energy sources with industrial equipment. May work independently and instruct or coach others. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident, or hazard. Comply with HSE standards, policies, procedures, and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality: Apply high standards of workmanship and craftsmanship. Support equipment uptime and downtime failure analysis. Perform work in accordance with diagrams, sketches, operation manuals, and specifications using various tools, measuring, and testing instruments. Provide feedback into the Preventive Maintenance system. Follow all process documentation and quality procedures. Raise issues to minimize cost and quality exposures. Perform quality inspections. Delivery: Fully proficient performing skilled activities expected by their roles in accordance with defined roles and responsibilities. Instruct and coach others and act as an informal resource for team members with less capability. Perform and document preventive, emergency, corrective, and predictive maintenance activities. Maintain clean and orderly work area, including routine housekeeping and machine cleaning tasks. Perform other miscellaneous duties as required to meet production goals. Work with peers and support staff to identify and reduce manufacturing constraints, solve problems, and improve processes. Participate in continuous improvement activities. Teamwork: Communicate effectively with the assigned team and all support teams. Complete training and personal development in line with business requirements. Participate actively with local Total Productive Maintenance (TPM) teams to improve quality, safety, process, material flow, and employee development. RESPONSIBILITIES Qualifications: Education, Licenses, Certifications: High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Competencies: Collaborates: Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively: Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus: Building strong customer relationships and delivering customer-centric solutions. Decision quality: Making good and timely decisions that keep the organization moving forward. Demonstrates self-awareness: Using a combination of feedback and reflection to gain productive insight into personal strengths and weaknesses. Drives results: Consistently achieving results, even under tough circumstances. Ensures accountability: Holding self and others accountable to meet commitments. Manages complexity: Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Nimble learning: Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. Health and Safety Fundamentals: Champions and models proactive health and safety behaviors by identifying, reporting, and participating in actions to improve health and safety to build an interdependent culture and contribute to an injury-free workplace. Controls Safety: Recognizes controls-related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment. Manufacturing Knowledge: Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Values differences: Recognizing the value that different perspectives and cultures bring to an organization. QUALIFICATIONS Experience: Requires significant relevant work experience or specialized skills obtained through education, training, or on-the-job experience. Knowledge/Skills: Good knowledge of Precision Grinding (OD and ID Grinding) and Machining processes. Awareness of CNC Programming (Fanuc and Siemens). Capability analysis, problem-solving approach, and continuous improvement methodology. Preferred experience in Unconventional Machining processes such as Electrical Discharge Machining and Abrasive Flow Machining. Knowledge of Tooling management (Procurement, Spare management, Localization, etc.). Willingness to work in all three shifts based on production plan. Good understanding of Work Instructions and other process planning documentation. Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2413133 Relocation Package Yes

JOB DESCRIPTION: 1. Milkoscreen Instrument - Service 2. Trail & Demo 3. Installation & Training to customers 4. Exhibition Participation 5. Preventive maintenance and Breakdown 6. Target Achievement as per KRA/KPI 7. Travel to customer sites as required for on-site troubleshooting, maintenance, and support Key Skills required : 1. Electronics Tool handling 2. Basic Electronics 3. Soldering & Component Handling 4. Troubleshooting & Fault Finding 5. Circuit tracing Soft skill also required: MS-Excel, MS-Office, Computer Proficiency, etc. Non-Technical Skills required : 1. Good Communication Skill 2. Customer Handling 3. Ready for extensive travelling (In case required-Across India) 4.Report preparation and data entry for ongoing trials and service calls. 5.Reminder for Service contract expiry and renewal 6.Deliver a high level of Customer Satisfaction as well as achieve/exceed the financial target through promotion of AMC & Sale of spares. Experience: 0 - 6 Years Education Required: Diploma & B. Tech/BE in (Electronics / Electrical /Instrumentation) Gender: Only Male Candidates Required Location: Baramati, Maharashtra Job Type: Full-time Remarks: 2 wheeler and Driving License is Mandatory Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Health insurance Internet reimbursement Leave encashment Provident Fund Schedule: Day shift Monday to Friday Morning shift Education: Diploma (Preferred) Willingness to travel: 100% (Preferred) Work Location: Remote

DESCRIPTION Job Summary ON-SITE ROLE The Level II Electrician performs electrical maintenance and machine support tasks to ensure manufacturing equipment remains functional, efficient, and compliant with safety standards. This role requires intermediate-level knowledge and hands-on experience in maintaining CNC HMCs and industrial automation systems. The electrician applies sound electrical and mechanical skills, contributes to preventive and predictive maintenance programs, and actively supports continuous improvement and cost-saving initiatives. Key Responsibilities Health, Safety & Environment (HSE) Comply with all Cummins HSE policies, procedures, and regulatory standards. Immediately report any hazards, incidents, or injuries. Use required PPE and follow safe work practices. Participate in HSE training and improvement initiatives. Recognize and mitigate potential environmental impacts of maintenance activities. Quality Apply high standards of workmanship and attention to detail. Conduct equipment inspections and diagnose failures. Perform maintenance in accordance with schematics, manuals, and specifications. Provide feedback and updates to the Preventive Maintenance (PM) system. Follow quality procedures and perform quality inspections. Delivery & Operational Support Perform electrical maintenance, troubleshooting, and repairs on manufacturing equipment, especially CNC HMC machines. Conduct preventive, corrective, emergency, and predictive maintenance. Schedule and perform maintenance around production timelines. Ensure compliance with all electrical codes and industrial standards. Document maintenance activities, parts usage, and support parts procurement and localization. Teamwork & Continuous Improvement Work closely with production and support teams to reduce downtime and improve equipment reliability. Participate in TPM and Kaizen activities. Train and mentor junior maintenance staff. Contribute to SOP creation, automation enhancements, and backup management of industrial software. RESPONSIBILITIES Core Competencies Collaborates – Works effectively with cross-functional teams. Communicates Effectively – Tailors communication to diverse audiences. Customer Focus – Aligns maintenance actions with internal customer needs. Decision Quality – Makes sound decisions promptly. Drives Results – Delivers outcomes consistently, even under pressure. Nimble Learning – Learns from both success and failure to improve. Values Differences – Embraces diverse perspectives to strengthen collaboration. Technical Competencies Health and Safety Fundamentals – Practices proactive safety and fosters a safety culture. Controls Safety – Applies safe practices when working with electrical, hydraulic, and pneumatic systems. Electrical System Troubleshooting – Diagnoses and repairs control systems and electrical faults. Factory Automation & Control Systems – Uses Siemens TIA Portal V17–19 for automation support. Machine Programming – Understands Siemens CNC (Sinumerik 1 and 828) systems. Manufacturing Knowledge – Applies understanding of manufacturing equipment and processes. Education, Licenses & Certifications High School Diploma or equivalent required. Technical Diploma or Degree in Mechatronics, Industrial Maintenance, or related field preferred. Relevant safety or maintenance certifications (e.g., OSHA, CNC machining) are an advantage. Must meet licensing requirements for export control/sanction compliance (if applicable). QUALIFICATIONS Experience 3–5 years of hands-on maintenance experience in a manufacturing environment, especially on CNC HMCs. Prior experience with machines such as MAG, MAKINO, MAZAK is preferred. Knowledge of equipment used in cylinder block and cylinder head manufacturing is a plus. Technical Knowledge Electrical and mechanical system diagnostics and repair (spindles, bearings, pumps, motors, etc.). Understanding of Siemens CNC platforms, ATLAS COPCO nut runners, laser marking systems, Marposs gauging, vision systems, and traceability systems (CMES). Familiar with predictive maintenance tools, IPC ghost backups, PLC/CNC program backups, and I4.0 technologies. Proficiency in reading technical drawings, including pneumatic, lubrication, electrical, and mechanical schematics. Soft Skills Effective communication and teamwork. Detail-oriented with strong problem-solving skills. Time management and ability to prioritize multiple tasks. Capable of preparing reports and sharing maintenance performance metrics (MIS). Working Conditions Willingness to work flexible hours and overtime as needed. Ability to lift heavy components and work in confined or elevated areas. Adherence to all Cummins safety standards and protocols. Self-motivated with a proactive, positive work attitude. Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2414865 Relocation Package Yes

Job Title : Civil Site Engineer Location:- Phaltan Qualification:-Diploma/Degree in Civil Experience: Minimum 4 years in civil construction site engineering Shift:- General Job Description: We are seeking an experienced Civil Site Engineer to oversee and manage construction activities on-site. The ideal candidate will have a strong background in civil engineering, with expertise in coordinating project execution, ensuring compliance with safety standards, and maintaining quality control. Responsibilities include supervising contractors and laborers, interpreting and implementing project plans and drawings, conducting site inspections, and ensuring timely completion of projects within budget. The Civil Site Engineer will collaborate with project managers, architects, and clients to resolve any on-site issues and optimize workflows. Strong knowledge of construction methods, materials, and regulations is essential. Proficiency in using site management software and good communication skills are required to lead the team effectively and report progress to stakeholders. Interested candidates kindly contact on:-9226650996 Job Types: Full-time, Permanent Pay: ₹35,000.00 - ₹450,000.00 per month Experience: Civil Site Engineer: 4 years (Preferred) Location: Phaltan, Maharashtra (Preferred) Work Location: In person Application Deadline: 30/06/2025 Expected Start Date: 25/06/2025

DESCRIPTION The CNC Machine Operator is responsible for operating manual and automated CNC machines in a manufacturing environment to meet quality and productivity standards. This role requires adherence to safety protocols, quality procedures, and production targets while maintaining a clean and organized work area. The operator works with limited guidance and collaborates with cross-functional teams to ensure smooth operations. Key Responsibilities Health, Safety & Environmental (HSE) Immediately stop work and report any major injury hazards or incidents. Comply with all HSE standards, policies, procedures, and regulations. Use appropriate personal protective equipment (PPE). Participate in HSE training and promote a culture of safety and environmental responsibility. Identify and correct hazards within control and capability. Minimize environmental impact through responsible work practices. Quality Follow standard work procedures, including Statistical Process Control (SPC), poka-yoke, and visual standards. Perform quality inspections and identify non-conforming materials. Raise quality issues to minimize cost and exposure. Ensure compliance with all quality documentation and processes. Delivery Operate CNC machines (e.g., Mazak, Grob, MAG) to manufacture and assemble products to meet customer specifications. Achieve production goals and maintain required cycle times. Perform routine housekeeping and machine maintenance tasks. Remain flexible and perform additional duties as needed to meet production targets. Collaborate with peers and support teams to identify and address equipment issues. Teamwork Communicate effectively with team members and support staff. Complete required training and personal development activities. Actively contribute to continuous improvement in quality, safety, and process efficiency. RESPONSIBILITIES Core Competencies Communicates Effectively – Clearly conveys information tailored to different audiences. Courage – Willing to address difficult issues and speak up when necessary. Drives Results – Consistently meets or exceeds performance goals. Ensures Accountability – Takes responsibility for actions and outcomes. Health and Safety Fundamentals – Promotes and models safe work behaviors. Manufacturing Knowledge – Applies knowledge of manufacturing processes to improve operations. Values Differences – Appreciates and leverages diverse perspectives and backgrounds. Qualifications High school diploma or certificate of completion of secondary education or equivalent experience. This position may require licensing for compliance with export controls or sanctions regulations. QUALIFICATIONS Skills and Experience Minimum 3–4 years of experience operating CNC machines in an industrial setting. Experience with Mazak, Grob, and MAG machines is preferred. Willingness and ability to work in rotational shifts. Intermediate knowledge of manufacturing processes and machine operations. Strong attention to detail and commitment to quality. Ability to work independently and as part of a team in a fast-paced environment. Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2415018 Relocation Package Yes

DESCRIPTION Job Summary: The Electrician Level II is responsible for performing electrical maintenance, troubleshooting, and support activities across manufacturing equipment and plant systems. This role ensures the availability, reliability, and safety of machinery and control systems through proactive maintenance, repairs, and continuous improvement initiatives. Working with limited supervision, the technician applies deep technical knowledge of electrical, control, and mechatronic systems while adhering strictly to safety, quality, and environmental standards. Key Responsibilities: Health, Safety & Environment (HSE): Identify and immediately report hazards and incidents. Comply with HSE policies and wear required PPE. Promote a safety-first culture by proactively addressing unsafe conditions and participating in safety audits, risk assessments, LOTO, and training. Quality: Maintain high standards of workmanship. Follow maintenance SOPs and quality procedures. Provide feedback for preventive maintenance (PM) plans and conduct equipment failure root cause analysis. Perform inspections and tests to ensure work meets Cummins quality standards. Maintenance & Repair: Conduct preventive, corrective, predictive, and emergency maintenance on CNC HMCs and other manufacturing machinery. Troubleshoot electrical, mechanical, hydraulic, pneumatic, coolant, and lubrication systems. Ensure timely documentation of maintenance activities and support spare part planning, procurement, and inventory with the CIP team. Technical Operations: Support control system development, sensor applications, and automation upgrades using tools such as Siemens TIA Portal, SCADA, and MES systems. Manage software backups (e.g., IPC Ghost images, PLC/CNC programs). Work on cost-saving and green energy initiatives (I4.0 automation, energy-efficient systems, etc.). Team Collaboration & Continuous Improvement: Communicate effectively across maintenance, production, and support teams. Mentor junior team members and document key learnings via SOPs and One Point Lessons. Engage in Kaizen, TPM, and CI activities to drive productivity, safety, and reliability improvements. RESPONSIBILITIES Competencies: Health and Safety Fundamentals Safety Controls & System Security Electrical System Troubleshooting Factory Automation & Machine Programming Controls Networking & Engineering Knowledge Manufacturing Knowledge & Sensor Technology Collaborates & Communicates Effectively Customer Focus & Drives Results Decision Quality & Nimble Learning Values Differences Required Education, Licenses, and Certifications: Minimum: High school diploma or equivalent. Preferred: Diploma or Degree in Mechatronics, Electrical, Electronics, or Controls Engineering. Export control regulations may apply depending on the plant location. Experience Requirements: External Candidates: 3–5 years of hands-on experience in electrical and mechanical maintenance in a manufacturing setting, specifically with CNC Horizontal Machining Centers (HMCs). Internal Candidates: 5–10 years of relevant experience, ideally with exposure to ignition SCADA, SQL databases, MES, and TPM systems. QUALIFICATIONS Key Technical Skills: Industrial Automation & PLC Systems: Siemens (Sinumerik 1, 828), Allen Bradley, Mitsubishi, Fanuc, Omron PLC Programming Tools: TIA Portal V15.1–V19, SIMATIC Manager, RS Logix 500, GX Works Sensors & Instrumentation: Cognex, IFM, Leuze, Zenon, SIGMA Software Digital Communication Protocols: Ethernet/IP, Profibus, Profinet, RS232, CC-Link Drives: Siemens G120, Mitsubishi VFDs CNC Machine Systems: MAG, MAZAK, MAKINO, Desoutter Nut Runners, Nagel Honing, GUDEL Gantry Equipment Knowledge: APCs, ATLAS COPCO tools, VISION systems, washing machines, TOX leak testers, Marposs gauges Additional Tools: CMES, IPC backups, SCADA, MES, calibration tools, laser marking, pump/motor systems Soft Skills: Effective communication Team leadership and mentoring Strong documentation and MIS reporting Time and task management under pressure Proactive mindset and self-motivation Working Conditions: Flexible to work multiple shifts and overtime. Capable of lifting heavy components and working in confined spaces. Committed to upholding Cummins Safety Policy, TPM, 5S, and continuous improvement culture. Preferred Qualifications: Experience in cylinder block/head machining and test cell equipment Exposure to energy conservation initiatives and predictive maintenance techniques Certifications in CNC machining, safety (e.g., OSHA), or industrial automation Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2414948 Relocation Package Yes

DESCRIPTION Technical specialist and primary customer support contact to diagnose and execute complex repairs to engine products at the customer’s site. Key Responsibilities Establishes and continually develops productive customer relations and ensures prompt and efficient attention to customer needs. Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete complex repairs at customer site. Performs preventative maintenance activities as per documented schedules and standards on engines and related components in the field. Escalates unresolved issues to product specialists or supervisor. Coaches and develops technicians and/or apprentices and transfers knowledge and experience to others; may provide work direction; may review repair plans, parts lists, etc. Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens. Identifies additional sales and service opportunities with customer. Completes training in line with skill and business requirements. Maintains service vehicle and tools for cleanliness and proper operation. Ensures adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues/incidents to site management and to their supervisor. RESPONSIBILITIES Qualifications & Experience Engineering in Electrical & Electronics preferred. Over 10 years of field experience in electrical, electronics, and controls, including electrical panels. Experience with diesel engines and after-treatment systems. Education, Licenses, Certifications Apprentice Trained Engine Technician (Preferred) Vocational diploma from relevant technical institution Locally valid driving permit This position may require licensing for compliance with export controls or sanctions regulations. Competencies Communicates effectively : Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus : Building strong customer relationships and delivering customer-centric solutions. Develops talent : Developing people to meet both their career goals and the organization’s goals. Manages complexity : Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Manages conflict : Handling conflict situations effectively, with a minimum of noise. Self-development : Actively seeking new ways to grow and be challenged using both formal and informal development channels. Health and Safety Fundamentals : Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Diagnostics Application : Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided workflows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking. Electronic Service Tool Application : Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution. Engine Systems Interactions : Interprets and analyzes the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair. Product Repair and Maintenance : Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition. Service Documentation : Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done. Technical Escalation : Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner. Values differences : Recognizing the value that different perspectives and cultures bring to an organization. QUALIFICATIONS Experience Significant field service work experience Expert level knowledge of and/or experience with engine products Customer service experience Experience providing technical advice and coaching to more junior technicians (preferred) Knowledge/Skills Familiarity with various types of controllers used in Cummins engines. Proficiency with software tools like INSITE, INPOWER, SiDia. Capability to handle Mechanical & FAE (Quantum) Engines. Good knowledge of various fuel systems like PT Fuel, HPI, HPCR, MCRS, and ATS and their functions. Ability to understand engine wiring diagrams and CAN communications. Knowledge of various applications is an advantage. Good communication and presentation skills. Should have visibility/thought to bring AI technologies under training. Job Service Organization Cummins Inc. Role Category Hybrid Job Type Technician ReqID 2412631 Relocation Package No

DESCRIPTION GPP Database Link (https://cummins365.sharepoint.com/sites/CS38534/) Job Summary: As part of a formal skilled trades training program, assists site Machinist skilled trades to learn and develop tool room skills in a manufacturing environment under direct guidance. Apprentice will be required to successfully complete and document specified classes and a minimum quantity of on the job training hours. Learns and understand the protocols of working safely with electricity and other energy sources with industrial equipment. Key Responsibilities: Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Learns and applies high standards of workmanship and craftsmanship. Support equipment uptime and downtime failure analysis. Performs supervised work in accordance with diagrams, sketches, operation manuals and specifications using various tools, measuring and testing instruments. Provide feedback into the Preventive Maintenance system. Follows all process documentation and quality procedures. Raises issues to minimize cost and quality exposures. Performs quality inspections. Delivery Attends classes required to build basic tool room skills and knowledge to qualify as a Machinist. Completes all required on the job training hours. Repairs and maintains manufacturing equipment and other miscellaneous duties within their capabilities . Assists with preventive, emergency, corrective and predictive maintenance activities. Maintains clean and orderly work area, including routine housekeeping and machine cleaning tasks. Identify and reduce manufacturing constraints Solve problems and improve processes Participate in continuous improvement activities Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively with local Total Productive Maintenance (TPM) teams in ways to improve quality, safety, process, material flow, and employee development. RESPONSIBILITIES Competencies: Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Controls Safety - Recognizes controls related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Tool and Fixture Design - Selects work-piece-holding devices capable of effectively holding parts and products during a manufacturing process to secure their position to meet functional requirements. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications: High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience: Minimal or no work experience required. QUALIFICATIONS The candidate is expected to be able to handle the following tasks on shopfloor of a high production machine shop. The candidate should have a 2-3 years experience in machine shop and should have an engineering diploma in Mechanical / Automobile CNC programming - Fanuc and Siemens CNC machine operating Honing Machine operating Fixture setup change Tool change Basic GD&T knowledge Machine shop production Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2412825 Relocation Package Yes

DESCRIPTION Key Responsibilities: Fixture PM Compliance Execution as per schedule Setting Fixture runout PM and Process Check sheet Monitoring / Revising based on history / Lesson learned from failure Maintaining all machines Process parameter back ups Attending Daily ME related breakdown& Communication to team Identify the Critical spares Provide support in the installation and commissioning activities May be responsible for the Re layout & VPI /VPCR Ensure safe working and maintaining the safe work environment Following MOC / MCR / TCR for all and any process change Working towards RFT improvements & reduction rejection, retry Project support for M/C Inspection , Installation Support, Closer of open points Good Knowledge on PFD, PFMEA,SWI, Control plan & Process parameter and updating With CFT inputs Day to day line support to resolve the Tool issue , process issue ,rejection ,RFT ,OEE, Process capability , fixture maintenance Preparing RCA / WHY -WHY Analysis / FTA 7 Step Problem solving 6S- DMAIC Handling IATF Internal and external audits carryout Cycle time study Carryout Process validation Handling HSEMS Audit and machine guarding support on set up changer over Capacity and utilization calculations Preparing MRM monthly pack RESPONSIBILITIES Competencies: Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Decision quality - Making good and timely decisions that keep the organization moving forward. Demonstrates self-awareness - Using a combination of feedback and reflection to gain productive insight into personal strengths and weaknesses. Drives results - Consistently achieving results, even under tough circumstances. Ensures accountability - Holding self and others accountable to meet commitments. Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Controls Safety - Recognizes controls related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications: Diploma in Mechanical Engineering Experience: Minimum 7 to 9 years of experience QUALIFICATIONS Required Skills Proficiency in Machining mechanical maintenance is added advantage. Hands on experience in Pneumatic & Hydraulic system Trouble shooting and maintaining Knowledge of Basic mechanical setting, alignments, R&R , MSA Short term & Long term capability calculations (Minitab) Laser Welding knowledge Good communication skills to interact with suppliers & engineering team Good communication & presentation skill. Good analytical skill for any technical issues Computer proficiency (Word, PowerPoint, Excel). Multitasking along with follow-up with vendors to get the work done on priority. Capable to ready the prints and drawings & Making markup drawings Think different - Kaizen / 6s / continues improvements Handling of Cobots & Robot teaching , Welding process Fixture Runout setting Working on Tooling down time & process related improvements Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2413319 Relocation Package Yes