30 Jobs in Hadgaon

Experience of PLC & SCADA programming Understanding of P&IDs and Control Systems Site Visit based on project requirement PLC Programming (Ladder, ST,FBD) Experience with Profibus, Modbus, CAN implementation SCADA Development(GUI Designing, Scripting, SCADA Database Configuration) Experience with Codesys, TIA Portal, Studio 5000 PLC softwares Experience with WinCC, Factorytalk SCADA/HMI Softwares Experience in PLCs & SCADA tools from ABB, Siemens, Rockwell, etc Understanding of Controls and automation invovled in plant process Experience in calibration of field sensors, drives, motors, pumps,etc Involvement in budgeting and procurement of project related resources Good analytical, integration and debugging skills are necessary Very Good oral and written communication and multitasking skills are expected

Design & Development of Power Electronics products like Motor Drives & Power Converter like DC/DC, inverters etc. for Military applications, Technical Offer preparation, Binding Data Drawing and PLM release activity. Design of DC/DC converters & Drives, converter topology selection, simulations, Filter design, Conceptualizing products for Defence Applications, development and testing of Prototypes. Product ionization of prototypes Engineering of existing products to meet Military applications, Interaction with cross-functional design teams and vendors for sub system design. Conceptual design of new Power Electronics products from specification and its realization. Hands on design in power converters, drives or subsystems circuits like gate driver, power stacks etc. Experience in design or testing of Medium voltage 690VAC or above converter/drives would be good. Experience in design of Rugged Power Electronics converters or drive for Military applications. Experience in design selection of Electronics component and it best uses. Knowhow of detailed application engineering of product. Good in Technical acumen and problem solving and solution oriented skills. Hands on experience in controller board testing and debugging skills. Preferred Industries: Power Electronics product companies like: ABB, GE, APC, Eaton, Honeywell, Centum, Tata Power SED , EATON, SCHNEIDER ELECTRIC, Any EV segment Industries etc

Responsible for Design and Engineering for Electronics Sub assemblies which shall further be integrated with Electro-Mechanical and Hydraulic systems. Detailed understanding of customer requirements and preparation of System Requirement Specifications . Conceptualisation of Electronics Systems and subsystems . Component selection . Develop Schematics and associated design deliverables for Electronics/ Electricals sub assemblies using E-CAD tools Review and Validate Design of associated sub assemblies (Bought out/ In-house Developed) Preparation of Unit and System level harness drawings including implementation in 3D CAD environment. Support Business Development team with proposal Engineering and technical inputs. Coordination with customer for Design approvals from DRDO Labs / Armed forces Branches. Conceptualisation of enclosures wrt boundary conditions. Preparation of Harness routing and General Arrangement Drawings wrt EMI EMC aspects Major Expertise Expertise in Design of Electronics Control/Power System. Good understanding of Electronics and Electrical circuits . Military Applications and Standards

Assistant Manager/ Manager - Project Management (AELS) As a part of the AELS project management team, you will be responsible for planning, monitoring and realization of electronics sub-systems of multiple projects. The role involves the following responsibilities:- Monitoring progress on Concerto (Project Management Tool) and arranging periodic review meetings. Monitoring and controlling project cash flows Identifying risks and taking necessary actions for their mitigation Communication and coordination with customer for project related activities. Coordination with cross functional team to ensure progress as per plan and conflict resolution Cost Estimation for prospect orders Preparing and releasing periodic status updates The role would involve travel to customer location/ sites based on requirement Hands-on experience of MS Project would be an added advantage As a Manager, you would additionally be handling multiple projects and team management responsibility

Job Summary The Manager – Process and Methods Engineering is responsible for leading and optimizing industrial processes, enhancing operational efficiency, and driving continuous improvement initiatives across production systems. This role plays a strategic part in designing and implementing engineering methods and process controls that ensure productivity, quality, safety, and cost-effectiveness. Key Responsibilities Lead the development, standardization, and optimization of manufacturing and operational processes. Analyze current production and workflow systems to identify improvement opportunities in efficiency, quality, and cost. Implement lean manufacturing, Six Sigma, and other continuous improvement methodologies. Develop and maintain standard operating procedures (SOPs), work instructions, and process documentation. Collaborate with cross-functional teams (R&D, production, quality, maintenance, and supply chain) to align engineering processes with strategic goals. Drive automation, digitalization, and innovation in process improvement initiatives. Lead root cause analysis and problem-solving activities for process-related issues. Monitor and report key performance indicators (KPIs) for process efficiency, cycle times, and yield improvement. Oversee the training and development of engineers and technical staff within the methods and process engineering team. Key Skills And Competencies Strategic thinking with strong analytical and problem-solving skills. Leadership and team management abilities. Project management and cross-functional collaboration experience. Excellent communication and interpersonal skills. Strong attention to detail with a focus on quality and process control. Proficiency in engineering software (e.g., AutoCAD, SolidWorks, simulation tools). Desirable Certifications (Preferred But Not Mandatory) Six Sigma Green/Black Belt Lean Manufacturing Certification

Responsible for driving growth and expanding the BU’s market presence. This role involves identifying new business opportunities, building and maintaining relationships with clients, and collaborating with internal teams to develop strategies that meet market and client needs. Conduct market research to identify new business opportunities and understand market trends. Build and maintain strong relationships with clients and partners. Work with internal teams to develop strategies that align with market and client needs. Present business plans and strategies to company leaders and stakeholders. Track, identify, and add qualified prospects to the sales pipeline. Negotiate contract terms with clients and communicate with stakeholders. Monitor the progress of business initiatives and adjust plans as necessary. Track and report on the status of proposal components and business development activities. Strong understanding of market dynamics and industry trends. Excellent communication and negotiation skills. Ability to build and maintain relationships. Strategic thinking and problem-solving skills. Proficiency in using CRM software and other business tools. Bachelor's degree in Business, Marketing, or a related field. Experience Previous experience in defence background will help in business development, sales, or a related field is often required. This role is crucial for the growth and success of BU’s, as it helps in expanding the client base and increasing revenue

Job Description Responsible for Integrated Logistics Support (ILS)- Engineering support, repair and maintenance of the weapon systems supplied to the customer. Responsible for Joint Receipt Inspection (JRI), Installation and commissioning (I&C) of AD weapon system at multiple customer locations across the country. Planning and coordination with costumer for movement of equipment from factory to customer premises, all activities for JRI and I&C, ensure completion of the scope as per contract and obtain sign-off from customer. Manage team of engineers and technicians which will support in JRI, I&C and ILS of the supplied equipment, ensure their training on operation and maintenance of the equipment. Proactively plan regular check of the commissioned systems in consultation with the customer and ensure preventive maintenance as per specifications. Respond to any customer complaints or concerns immediately and ensure closure of complaints with appropriate sign off. Carry out any Defect Investigation required and ensure formal closure of defects in the customer channel. Assist internal training team for conduct of customer training on the supplied system. Conduct refresher training for the customer at site. Coordinate with internal stakeholders and business partners for any support required at site for JRI, I&C or ILS. Eligibility, Skills & Qualifications Ex Short Service Commissioned Indian Air Force officer (Squadron Leader) from Weapon Systems background with max 10 years of service. Degree in Engineering in Electronics or Telecommunication engineering. Experience in operation and maintenance of air defence weapon systems, radars. Technical skills and aptitude for in depth learning of new systems. Ability to lead a team of technicians from varied streams, located across the country, ensure their availability, technical training, administration, discipline and performance for ILS, JRI & I&C. Adept at planning and execution of projects in collaboration with internal stakeholders, managing constraints of time, cost and shared resources. Customer Relationship Management for streamlining processes and improve business relationship with customer. Soft skills for effective communication with customer ensuring organizational interest. Adept with MS office, projects, Power BI tools for planning, execution, reporting and communication. Medically and physically fit for regular travel across India to customer sites. Age- 35 years

Responsible for Engineering and Design of Electronics Sub-Assemblies which shall be integrated to Electro-Mechanical-Hydraulics Systems for Defence Applications. Develop Schemes and associated design deliverables for electronics / electrical sub-assemblies using E-CAD tools Review and validate design of associated sub-assemblies (Bought Out / In House Developed) Responsible for preparation of unit and system level harness drawings including implementation in 3D CAD environment. Support review of engineering work before release for manufacturing. Support business development team in proposal engineering w.r.t. technical inputs. Responsible for technical coordination, Approvals from Customer including DRDO Labs / Armed Forces Branches. Major Expertise Expertise in Design of Electronics Control/ Power Systems, Very Good Understanding of Electronics/ Electrical Schemes, Military applications and standards,

The Accounts Executive is responsible for supporting the day-to-day accounting operations within the manufacturing company. This role involves assisting with financial record-keeping, transaction processing, account reconciliations, and reporting. The ideal candidate will have a strong understanding of accounting principles, excellent attention to detail, and the ability to work effectively in a fast-paced manufacturing environment Transaction Processing Process invoices, purchase orders, and receipts with accuracy and timeliness. Ensure proper coding and documentation of all financial transactions. Record and reconcile bank deposits and payments. Handle vendor invoice processing including verification, matching, and coding after performing a 3-way Match. Process employee expense claims in accordance with company policy. Accounts Payable (AP) & Accounts Receivable (AR) Assist with maintaining accurate accounts payable records. Prepare and process payments to vendors on a timely basis. Respond to vendor inquiries and resolve payment discrepancies. Assist with maintaining accurate accounts receivable records. Track customer payments and assist with collection efforts. Bank Reconciliation Perform daily and monthly bank reconciliations. Identify and resolve any discrepancies between bank statements and company records. General Ledger Maintenance Assist in maintaining the accuracy of the general ledger. Post journal entries as needed. Assist with month-end and year-end closing processes. Perform reconciliations of key balance sheet accounts. Financial Reporting & Analysis Assist in the preparation of financial reports (e.g., P&L, Balance Sheet). Support with variance analysis and identify potential issues. Prepare schedules and reports as required by the Finance Manager. Compliance Adhere to all relevant accounting standards, regulations, and company policies. Maintain confidentiality of financial information. Support in GST/ TDS/TCS reconciliations and return fillings. Other Duties Provide support to the finance team as required. Assist with ad-hoc projects and tasks as needed. To be familiar with all company policies and programs and follow them. To actively participate in the company safety programs to achieve the yearly safety goals. Internal Use Only Salary Global Terms of Use and Privacy Statement Carefully read the BorgWarner Privacy Policy before using this website. Your ability to access and use this website and apply for a job at BorgWarner are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the geographical area where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms. Career Scam Disclaimer BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their national ID numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities. Show more Show less

Inspection/ testing of electronic Component/ sub-assemblies as per Defence standards I policies I customer approved documents Preparation & review of QC documentation as per QAP I Defence guidelines Coordination with customer I inspection agencies for inspection coverage I inspection clearance note Understanding of environmental/ type testing requirement as per Defence standard Assessment & Analysis of defects observed during testing Coordination with manufacturing/design/ procurement / project team for smooth execution during testing Recording & presenting the data related to quality improvement of product assemblies Basic knowledge of ERP systems, Root cause analysis Preparation of Quality control Plans and quality documentation for electronics units/systems Knowledge of Quality Management System Show more Show less

Skill Sets BE/B tech in Electrical/Electronic Engineering with 4 yrs to 8 yrs of experience in maintenance. Experience In Electro-mechanical Systems In Defence Industry Preferred. Handling the currently running and new project/work front. Job Duties/ Responsibilities Installation, Commissioning and warranty / CAMC Support of Defence systems at customer location/site. Installation and commissioning of the system. Undertake preventive and corrective maintenance of system. Integration and trials of systems followed by JRI/OSAT. Project management activities. Department activities Addressing customer needs during the service life of supplied systems. Through Life Support services includes installation and commissioning, warranty Extension, comprehensive annual maintenance contracts, Repair and services, upgrade solution. Show more Show less

The candidate should have background in Design and engineering of electrical and electronic system for mission critical equipment. The candidate should have knowledge of wiring harness and wiring chart generation in tools like E3, Solidworks or AutoCad. The candidate should have knowledge of MIL standards like JSS55555, MIL461, BR3021, EED-Q, etc The candidate should have understanding of sensors and instrumentations The candidate should have expertise in electrical panel design, selection of components, layout development. The candidate should have good interpersonal skills, team player, ready to travel as per project requirements The candidate should have understanding of VME, Vxworks, PLC, SCADA, LINUX. The candidate should be well versed with simulation tools like Pspice, Matlab, Simulink, The candidate should be well versed in making unit level scheme, bill of material, general arrangement drawing, acceptance test procedure. The candidate should be well versed in making system level scheme, bill of material, cable layout. Show more Show less

Knowledge about manufacturing processes and vendor database. Responsible to source, negotiate and purchase materials from both local and oversea vendors. Evaluate vendor’s quotation to ensure that they are in line with the technical and commercial specifications required for the project. Advise internal and external on issues regarding purchasing Terms & Conditions. Responsible for daily operational purchasing needs such as planning, issuing and following up on Purchase Orders delivery and shipment schedules. Resolve supply, quality, service and invoicing issues with vendors. Responsible for implementing internal procurement strategies to cater to high delivery and short lead time requirements Undertake any other ad-hoc duties as assigned Willing to travel to suppliers place for expediting activities Show more Show less

Areas Of Exposure/ Work Background Candidate should have experience in installation / commissioning of mechanical, electro-mechanical and electro-hydraulic systems. Knowledge of defense systems is most preferred. Candidate should have experience in undertaking fault diagnosis, testing / trials, preventive and break-down maintenance, system level integration at sites. Candidate should be able to demonstrate abilities in identifying areas of improvements and process modifications to enhance operational efficiencies of machine, equipments and processes. Candidate should be able to prepare SOPs, perform inspections, testing, installation, commissioning, maintenance and troubleshooting of mechanical, electro-mechanical and hydraulic systems. Candidate should have good communication skills, team building and management traits, analytical and problem solving abilities. Candidate should have strong aptitude to interact and build network with customer agencies. Candidate should have ability to efficiently manage spares logistics to sites. Job Duties/Responsibilities Installation/ commissioning of mechanical, electro-mechanical and hydraulic systems. Troubleshooting and repair of mechanical, electro-mechanical and hydraulic systems. Undertake preventative maintenance and corrective maintenance of systems. Manage technical teams, coordinate administrative support, and logistics requirements to support site teams. Show more Show less

EMI/EMC test engineer for Environmental test laboratory Operation of electronics test equipment for EMI/EMC testing Review of calibration reports, release of test reports Use of Lab Information management system Failure analysis & Documentation Knowledge of Test standards: MIL 461 or equivalent international standards, ISO/IEC-17025, ISO 9001/ AS9100 Knowledge of NABL Procedures & guidelines required Troubleshooting of equipment required for testing Preparation of test procedures for EMI/EMC testing Knowledge and familiarity with EMI/EMC Instrument & maintenance (i.e. r eceivers, power amplifier, oscilloscopes, Function generator, signal generator, DMM, Clamp meter ESD Simulator, etc) Review test reports and maintain the integrity of all technical records Interfacing with Customer inspection agencies and with internal functions for smooth conduct of testing Show more Show less

Primary Work as an individual contributor as well as guide the team members (in MES DDC) Contribute to design and development of mechanical and structural components and systems of Mast Hoisting Gear (MHG) . Ensure all designs comply with industry standards, safety regulations, and client specifications Conduct detailed analysis and simulations to validate design integrity and performance Collaborate with cross-functional teams, including manufacturing, quality assurance, project management and through-life support. Coordinate among different departments and/or internal/external laboratories to perform experimental work. Perform literature or web survey, read and understand literatures and various standards to address design / R&D requirement Prepare, review and approve design documents, drawings, and specifications. P reparing drawings with an understanding of manufacturing process and releasing the drawings in PLM. Resolving Design Changes and Non Conformity Willing to travel to any place across India to visit vendor / customer / test facility Secondary Prior experience of working with PLM. Awareness of CMMI Level V for design and developmental project is preferred I dentify and develop skill sets required for ongoing / future design projects Areas Of Exposure/ Work Background Desired – Machine Design, Strength of Materials, FEA using Hypermesh and Ansys Mechanical, CAD (UG NX), FEA Fundamentals, Mechanics of Materials, Mechanical Vibration Preferred – Design and Analysis of Structure, Systems Engineering, PLM, Theory of Machines, Optimisation – Topology / Topography / Shape / Size, Design of Experiments (DOE) Show more Show less

Primary Work as an individual contributor as well as guide the team members Contribute to design and development of mechanical and structural components and systems. Ensure all designs comply with industry standards, safety regulations, and client specifications Conduct detailed analysis and simulations to validate design integrity and performance Collaborate with cross-functional teams, including manufacturing, quality assurance, project management and through-life support. Coordinate among different departments and/or internal/external laboratories to perform experimental work. Perform literature or web survey, read and understand literatures and various standards to address design / R&D requirement Prepare, review and approve design documents, and specifications. Preparing drawings with an understanding of manufacturing process and releasing the drawings in PLM. Resolving Design Changes and Non Conformity Willing to travel to any place across India to visit vendor / customer / test facility Secondary Prior experience of working with PLM. A wareness of CMMI Level V for design and developmental project is preferred Identify and develop skill sets required for ongoing / future design projects. Areas Of Exposure/ Work Background Desired – Design and analysis of Structure, Machine Design, Strength of Materials, Theory of Machines, CAD (UG NX), System Integration, Hydraulics and Pneumatics, FEA Fundamentals, Geometric Dimensioning and Tolerances, Basic Manufacturing Process (Steel Machining and Welding) Preferred – Systems Engineering, Multi-Body Dynamics (MBD) Simulation using Adams / Excel / MotionSolve, PLM, Basic Electrical, FEA using Hypermesh and Ansys Mechanical Show more Show less

Group Company ACG Pam Pharma Technologies Pvt. Ltd. Primary Responsibilities Strategic and planning Understanding customer requirement, concept generation, Proposal making and costing of the enquiry. Standardization of the solutions offered for future requirements. Functional Design: Concept generation, layout preparation, design & cycle tie calculations, meeting with CFT for proposal approval, preparing costing sheet. Meeting with suppliers for B/O item selection and finalization. Visiting customer sites for input collection for making proposals. Offering proposed solution to customer within defined timelines, Close coordination with design & assembly teams during execution of the project and guide them as per proposed solution, Key Result Areas On-time submission of proposal. FTR proposal submission. Key Interfaces BE Mechanical with 4 -6 Years of Experience in proposal making, pre-sales activity. Competencies Show more Show less

Group Company ACG Pam Pharma Technologies Pvt. Ltd. Primary Responsibilities Strategic and planning Understanding customer requirement, concept generation, Proposal making and costing of the enquiry. Standardization of the solutions offered for future requirements. Functional Design: Concept generation, layout preparation, design & cycle tie calculations, meeting with CFT for proposal approval, preparing costing sheet. Meeting with suppliers for B/O item selection and finalization. Visiting customer sites for input collection for making proposals. Offering proposed solution to customer within defined timelines, Close coordination with design & assembly teams during execution of the project and guide them as per proposed solution, Key Result Areas On-time submission of proposal. FTR proposal submission. Key Interfaces BE Mechanical with 4 -6 Years of Experience in proposal making, pre-sales activity. Competencies Show more Show less

Job Description Responsible for Integrated Logistics Support (ILS)- Engineering support, repair and maintenance of the weapon systems supplied to the customer. Responsible for Joint Receipt Inspection (JRI), Installation and commissioning (I&C) of AD weapon system at multiple customer locations across the country. Planning and coordination with costumer for movement of equipment from factory to customer premises, all activities for JRI and I&C, ensure completion of the scope as per contract and obtain sign-off from customer. Manage team of engineers and technicians which will support in JRI, I&C and ILS of the supplied equipment, ensure their training on operation and maintenance of the equipment. Proactively plan regular check of the commissioned systems in consultation with the customer and ensure preventive maintenance as per specifications. Respond to any customer complaints or concerns immediately and ensure closure of complaints with appropriate sign off. Carry out any Defect Investigation required and ensure formal closure of defects in the customer channel. Assist internal training team for conduct of customer training on the supplied system. Conduct refresher training for the customer at site. Coordinate with internal stakeholders and business partners for any support required at site for JRI, I&C or ILS. Eligibility, Skills & Qualifications Ex Short Service Commissioned Indian Air Force officer (Squadron Leader) from Weapon Systems background with max 10 years of service. Degree in Engineering in Electronics or Telecommunication engineering. Experience in operation and maintenance of air defence weapon systems, radars. Technical skills and aptitude for in depth learning of new systems. Ability to lead a team of technicians from varied streams, located across the country, ensure their availability, technical training, administration, discipline and performance for ILS, JRI & I&C. Adept at planning and execution of projects in collaboration with internal stakeholders, managing constraints of time, cost and shared resources. Customer Relationship Management for streamlining processes and improve business relationship with customer. Soft skills for effective communication with customer ensuring organizational interest. Adept with MS office, projects, Power BI tools for planning, execution, reporting and communication. Medically and physically fit for regular travel across India to customer sites. Age- 35 years Show more Show less

Key Responsibilities Lead and manage overall project with special focus on electronics part of the project from initiation to completion - Study & response to RFP, SOTR, TSP, TNC, etc. Coordinate with cross-functional teams, including design, manufacturing, quality assurance, quality control & Stores. Develop project plans, timelines, budgets, and resource allocation. Identify and mitigate project risks and ensure compliance with industry standards. Work closely with clients and stakeholders to understand requirements and provide regular updates. Ensure proper documentation of project progress, reports, and technical specifications. Study & provide input to Supply chain group for procurement and vendor management for electronic components and services. Drive process improvements and best practices in project execution. Utilize project management tools (MS Project, Concerto etc.) to track progress & Enterpise resource planning tool to expedite the project. Ensure adherence to regulatory and safety standards (IEC, ISO, etc.). Show more Show less

The candidate should have background in Design and engineering of electricaland electronic system for mission criticael quipment. The candidate s hould have knowledge of wiring harness and wiring c hart generation in tools like E3 , Solidworks or AutoCad. The candidate should have knowledge of MIL s tandards like JSS55555, MIL461, BR3021, EEO-C, etc The candidate s hould have understanding of s ensors and in s trumentations The candidate should have expertise in electricalpanedl esign,selection of components,layout development. The candidate should have good interpersonalskills, team player , ready to traveal s per project requirements The candidate should have understanding ofVME,Vxworks, PLC,SCADA, LINUX. The candidate should be wellversed with simulation tools like Pspice,Matlab, S imulink, 9 , The candidate s hould be wellversed in making unit Levelscheme, billof material,generaal rrangement drawing,acceptance test procedure. The candid a te s hould be wellve rse d in m a king system Level sc heme , bill o f materi a , cable layout. Show more Show less

Job Objective Primary Responsibilities Product Ideation/Enhancement: Conducting customer visits to understand need based on new technologies, emerging trends, enhanced features, possible areas of product creations and conduct detailed analysis for finding possible ideas for new Products/enhancements Converting ideas to possible features or functionality of the product and sharing detailed possible description of the product with NPD Ensures Benchmarking with latest technologies, New Processes and New Specification needed by the product and takes action to bridge the gap Responsible for monitoring milestones planned in the product development cycle by coordinating with responsible departments like design, NPD and keeping track on time and costs, organizing for alpha / beta testing Accountable for Product launch and communication Product Strategy Responsible for defining TTM strategies, identifying Market positioning, product positioning, defining value selling features, price positioning Mapping competition strategy analysis to understand our product positioning and come up with proactive strategy to counter the same. Also, identifies unexplored Markets Understanding the gap for feasibility with respect to formulation Formulates sales and marketing strategies including branding, trade shows, reference building, and overall creating conditions for sale Business Expansion & Customer Management Ensuring that the product is well received by the market and performs optimally under the user conditions To keep track of all complaints in coordination with Sales and Marketing for the product and ensure good reference of the product in the market place till creation of defined first reference Ensuring standardization of the product by passing on the first set of comments for pilot batch and share the same with Design/NPD Ensuring that the sales force is adequately trained on Product knowledge to handle enquiries and value sell on USP’s of the Product. Coordinate with Marketing and support with technical inputs while preparing New Product Promotion material Ensure proper Pharma related documentation and certification as per regulatory guidelines Scope Of Decision Making Works under direction from the level above on the market trends as per emerging technologies, Customer requirements Takes decisions on idea generation and suggestion to NPD and creation of TTM strategy post approval and development of the product Key Result Areas Key Interfaces Key Customers Served: Internal: Sales & Marketing, Design, Projects, Assembly External: Customers Educational And Experience Requirements MBA/PGDM Marketing B.E/ B.Sc/B. Pharm Exposure in pharmaceutical/consumer brand management will be useful Technical Competencies & Personas ACG Product Knowledge Communication Has the candidate displayed any of the Values (Caring/Collaborative/Progressive) during the discussions? Good knowledge of Pharma Industry Understanding of the product and its application and the production value chain Technical Knowledge (Manufacturing) Technical Knowledge (ACG E product related) Product Management - Market Knowledge, Business Acumen Show more Show less

Summary : Responsible for monitoring connected machines from Smart Connected (IIOT) platform, analysing & identifying abnormal behaviours, and driving issue resolution through assigning Service Tickets & monitoring KPIs. Essential Duties And Responsibilities Understand the functioning & major assemblies of the machines onboarded on IIOT platform. Responsible for the configuring modules on IIOT Platform Responsible for the creating alerts on IIOT Platform for monitoring critical events on the machines Responsible for regular monitoring of machine dashboards & KPIs. Utilise analytical tools like PowerBI, MS Excel to derive insights. Analyse the reports, graphs & alerts from platform to identify abnormal behaviour on the machines. Create & assign Service Tickets to regional Service SPOC to attend the abnormality observed. Prepare weekly reports on observations, actions taken & status updates. Participate in customer meetings to understand requirements and customer feedback. Track improvement in KPIs and support in preparing Use Cases. Regularly sharing reports with customers Provide feedback to improve usability of the IIOT platform. Internal process Adherence to business rules and regulations, ACGE guidelines, ISO, Rules/regulations, etc. Integrate customer feedback with our existing business process and contribute to CA/PA. Adherence to confidentiality agreement People development Cross Knowledge sharing with internal team members Experiential learning with service engineers Train regionals service engineers Key Result Areas Response time to critical observations Quality of observations & insights captured from the platform. Impact of Service Tickets on Machine KPIs. Revenue generated per service ticket. Requirements Diploma/B.Tech (Mechanical/Electronics/Electrical) 1 to 3 years of experience in Data Analysis or Operational Excellence Experience in creating documents like progress trackers, reports, case studies, etc. Excellent problem-solving and analytical skills Excellent communication and interpersonal skills Travel Flexibility – up to 15% travel to ACG/Customer plants. Show more Show less

Experience of PLC & SCADA programming Understanding of P&IDs and Control Systems Site Visit based on project requirement PLC Programming (Ladder, ST,FBD) Experience with Profibus, Modbus, CAN implementation SCADA Development(GUI Designing, Scripting, SCADA Database Configuration) Experience with Codesys, TIA Portal, Studio 5000 PLC softwares Experience with WinCC, Factorytalk SCADA/HMI Softwares Experience in PLCs & SCADA tools from ABB, Siemens, Rockwell, etc Understanding of Controls and automation invovled in plant process Experience in calibration of field sensors, drives, motors, pumps,etc Involvement in budgeting and procurement of project related resources Good analytical, integration and debugging skills are necessary Very Good oral and written communication and multitasking skills are expected Show more Show less