Role & responsibilities Complete the work as a Piping Stress Engineer for oil refinery projects, LNG plant projects, and/or gas processing plant projects: - PJ coordination in terms of stress analysis with client, other disciplines, piping layout engineers, engineering subcontractors etc... - Piping stress analysis as per relevant international codes and/or project specifications/guidelines - Control status and schedule for piping stress analysis activities - Check sub contractors engineering products - Prepare work instructions and procedures for stress analysis - Review vendors drawing - Review ISO drawing in terms of piping stress analysis - Piping support design Preferred candidate profile Bachelor's Degree in Mechanical Engineering from a recognized university - Minimum 5 years or more of experience as piping stress engineer in EPC firms - Knowledge of ASME B31.3 and other codes and standards such as ASME, API, MSS, NEMA etc...' - CAESAR II operation skills. - Navisworks operation skills. - Review and Analysis of piping systems connected to Pumps, Compressors, Heat Exchangers, Reactors, Air fin coolers, columns, Heaters, Coke drums, Tanks, Pressure vessels, Ejectors, Plate exchangers, Aluminum brazed plate exchangers, Jacketed Piping, PSVs, Underground Piping systems etc. - Support selection & developing special/miscellaneous piping support arrangements based on requirements of stress analysis. - Support strength verification for standard supports and special supports. - Preparation of index of Stress Critical Line List, stress Analysis reports and Documentation. - Vendor Document review and commenting for mechanical specialty items. - Preparing Structural Loading Data for Racks, Structures, Air cooler super structures etc. Platform Loading for Equipment's. - Preparation of the Specifications/Data-sheets for springs, expansion Joints, struts, Snubbers, sway brace & other specialty items. - Flange leakage analysis - Module/FPSO sea transportation analysis considering wave motion. - Fatigue analysis of piping system for module/FPSO.

Work as a Senior Machinery/Packaged Equipment Engineer handling various machinery and packaged equipment. The responsibilities and duties in the experience desire to cover the following aspects. Assisting equipment cost estimation for machineries and packaged equipment in EPC bidding task Preparing RFQ document package for machineries and packaged equipment Conducting technical bid evaluation of machineries and packaged equipment vendor quotation and preparing selected vendor recommendation Conducting machineries and packaged equipment vendor document review for technical assurance after placing order to the vendor Making engineering information and coordination with the other disciplines Key Responsibilities: Schedule planning/management of machineries or packaged equipment RFQ, technical bid evaluation, order placement, after order detailed engineering Ability to identify risks, ability to assess customer requirements and based which to coordinate the relevant equipment vendors and the customer. Ability of communication and collaboration with various parties involved in the project/trouble A high standard of English language ability both written and spoken Ability to use the Microsoft Office environment in all aspects of daily work Highly ethical - accountable for actions and statements High attention to detail and proactive follow up The willingness to take responsibility as delegated and make decisions at appropriate times within the authority level Striving for excellence in efficiency, safety and profitability Requirements: Bachelor's Degree in Mechanical Engineering from a recognized university Work experience of more than7 years for Engineering Design of industrial machinery or packaged equipment for Oil & Gas petrochemical facility, chemical, power plant.

Role & responsibilities Bachelor's degrees from a recognized university Work Experience of more than 5 years in total as International Oil and Gas EPC Contractor's home office Logistics Coordinator for Equipment and Material being sourced from international suppliers, required for plant facility. Duration of total experience could be less than 5 years, if it could be substituted by the below, but majority should be as Logistics Coordinator of EPC Contractor: - Logistics Coordinator of International Freight Forwarder - Maritime Engineer of Breakbulk Shipping Carrier - Transport Engineer of Heavy haul Transporter - Overall Logistics Planning and Control - Issue Project Shipping Specifications and Procedures - Project Shipping Execution both offshore and onshore Preferred candidate profile A high standard of English language ability both written and spoken. -Ability to use the Microsoft Office environment in all aspects of daily work. -Highly ethical - accountable for actions and statements. -The leadership qualities to lead, delegate tasks and organize the team. -Ability to understand and interpret complex problems and explain them to others. -High attention to detail and proactive follow up. -The willingness to take responsibility as delegated and make decisions at appropriate times within the authority level. -Striving for excellence in efficiency, safety and profitability. -Basic understanding for international trade terms and shipping terms as Logistics Coordinator. -Deep underling for the shipping execution for ocean transportation, air transportation, multimodal transportation, inland transportation, customs formalities and duty exemption scheme for Plant Facility. -Showing mutual trust and respect in all our working relationships. -Respecting diversity and encouraging cooperation and teamwork. -Committing to open, transparent, effective, two-way conversation.

Work as part of the Process Engineering Project Team with specific responsibility for: Process optimization. Preparation and Development of basis of design, heat and mass balance, process flow diagrams, P&IDs, equipment and instrument sizing and data sheet. Hydraulic calculation, thermal rating of shell & tube heat exchangers and pressure relieving calculation. Process simulation (HYSYS/Pro-II). Estimation of utility consumption. Preparation of operation manual. Managing to the overseas engineering centers. Interface & coordination design activities, managing to the process related parties, such as Client and the other EPC contractors. Requirements Bachelor's Degree in Chemical Engineering from a recognized university. Work experience of more than 10 years in all facets of Process Engineering Design of large Oil & Gas/Petrochemical facility development. Knowledge of the following design software packages: Process Simulation Software: PROII, HYSYS Thermal Rating Software: HTRI A high standard of English language ability both written and spoken. Ability to use the Microsoft Office environment in all aspects of daily work. Highly ethical - accountable for actions and statements. The leadership qualities to lead, delegate tasks and organize the team. Ability to understand and interpret complex problems and explain them to others. High attention to detail and proactive follow up. The willingness to take responsibility as delegated and make decisions at appropriate times within the authority level. Striving for excellence in efficiency, safety and profitability.

Responsible for HVAC mechanical, HVAC controls andPlumbing Design related works for international projects as described below: Preparation of basic HVAC systems planning and designspecifications, including presentation to Client. Supervision of detailed engineering and BIM worksexecuted by 3 rd party engineering / BIM modelling consultantsincluding engineering quality and schedule control. Engineering coordination work with other buildingsdisciplines engineers (e.g., Architectural, Structural) and with otherplant discipline engineers (e.g., Civil, Piping, Mechanical, EI). Procurement support work related to vendor selection,purchasing, and technical advising, such as for HVAC equipment/panels. Construction support work related to subcontractorselection, contracting, field engineering and trouble shooting. Other than Oil Gas experience, other industry experience will also beconsidered for candidates with experience in (a) international projects, (b) industrialbuildings (non-commercial bldgs), such as power / infrastructure field Requirements BachelorsDegree in Mechanical Engineering from a recognized university 10 Years relevant experience in EPC of large Oil Gas/Petrochemical facility development. A high standardof English language ability both written and spoken. Ability to usethe Microsoft Office environment in all aspects of daily work. Highly ethical -accountable for actions and statements. Experienced indesign or/and field supervision/engineering in international projects is anadvantage The leadershipqualities to lead, delegate tasks and organize the team. Ability tounderstand and interpret complex problems and explain them to others. High attentionto detail and proactive follow up. The willingnessto take responsibility as delegated and make decisions at appropriate timeswithin the authority level. Striving forexcellence in efficiency, safety and profitability. Understanding ofPlant engineering for Oil Gas, Plant drainage systems undergroundstructures, concrete foundation design etc. Knowledge of thefollowing design software packages. Mentoring andtraining of junior engineers / GETs within the department. Direct supervisionand checking of the work by designers will be required Showing mutualtrust and respect in all our working relationships. Respectingdiversity and encouraging cooperation and teamwork. Committing toopen, transparent, effective, two-way conversation. Benefits The JGCOperations Centre is a high standard office environment, generally clean andsafe. JGC require all staff to maintainsafe working practice at all times both within the office and when travellingon business assignment, observing all HSE procedures as instructed. ","Department":"CSA

Work as part of Project Engineering Team, Under the work instruction of the Project Manager or Project Engineering Manager, he/ she assists a part of the following project management or engineering management duties. Issue necessary instruction to personnel assigned to the project. Prepare project procedures and project control plans. Control cost, schedule and revenue status of the project according to the established plan. Monitor and assess the performance of project activities in his/her responsibility. Propose corrective actions for any unsatisfactory situation and take action per the Project Managers or Engineering Managers instruction. Control HSE and Quality for his/her part of the project. Maintain communication and coordination among Client, Joint Venture partner, vendor, subcontractor and JGC internally according to the established procedures. Continuously monitor and assess the performance of his/her assigned scope from time to time. Initiate or inform superior of the need for corrective action promptly in all unsatisfactory situations. Accountable to the Project Manager or Project Engineering Manager. Requirements Bachelors Degree in Engineering from a recognized university or equivalent More than 5 years in EPC project engineering management or project management work experience for various overseas plant projects (gas processing, LNG, petroleum refining, petrochemical, chemical, nuclear power, etc.) Experience in coordination work in English with overseas customers, subsidiaries, licensors, vendors, contractors, etc. Negotiation and coordination with customers, vendors and sub-contractors Coordination with design and execution departments of internal and overseas subsidiaries Manage EPC execution elements such as costs, change claims and risks Management Operation and management of people, goods, money, and information ","Department":"Project

Work as part of the Process Engineering Project Team with specific responsibility for: Process optimization. Preparation and Development of basis of design, heat and mass balance, process flow diagrams, P&IDs, equipment and instrument sizing and data sheet. Hydraulic calculation, thermal rating of shell & tube heat exchangers and pressure relieving calculation. Process simulation (HYSYS/Pro-II). Estimation of utility consumption. Preparation of operation manual. Managing to the overseas engineering centers. Interface & coordination design activities, managing to the process related parties, such as Client and the other EPC contractors. Requirements Bachelor's Degree in Chemical Engineering from a recognized university. Work experience of more than 10 years in all facets of Process Engineering Design of large Oil & Gas/Petrochemical facility development. Knowledge of the following design software packages: Process Simulation Software: PROII, HYSYS Thermal Rating Software: HTRI A high standard of English language ability both written and spoken. Ability to use the Microsoft Office environment in all aspects of daily work. Highly ethical - accountable for actions and statements. The leadership qualities to lead, delegate tasks and organize the team. Ability to understand and interpret complex problems and explain them to others. High attention to detail and proactive follow up. The willingness to take responsibility as delegated and make decisions at appropriate times within the authority level. Striving for excellence in efficiency, safety and profitability. Benefits Covered under life insurance Covered under group medical insurance (Self, Spouse, Children & Parents)

Role & responsibilities Work experience of more than 5 years in all facets of Civil Engineering Design of Oil & Gas petrochemical facility development. Work as part of the Civil Engineering Project Team with specific responsibility for: - Underground drainage design - Roads, pavings, trenches design - Concrete foundation design Building design capability will be considered as additional skill Preferred candidate profile A high standard of English language ability both written and spoken. Ability to use the Microsoft Office environment in all aspects of daily work. Highly ethical - accountable for actions and statements. The leadership qualities to lead, delegate tasks and organize the team. Ability to understand and interpret complex problems and explain them to others. High attention to detail and proactive follow up. The willingness to take responsibility as delegated and make decisions at appropriate times within the authority level. Striving for excellence in efficiency, safety and profitability. Understanding of Plant engineering for Oil & Gas, Plant drainage systems & underground structures, concrete foundation design. Knowledge of the following design software packages Mentoring and training of junior engineers GETs within the department. Direct supervision and checking of the work by designers will be required Showing mutual trust and respect in all our working relationships. Respecting diversity and encouraging cooperation and teamwork. Committing to open, transparent, effective, two-way conversation.

Role & responsibilities Work as part of the Structural Engineering Team with specific responsibilities & Complete the work as a Structural lead engineer of pipe-rack, equipment supporting structure, shelter, platform, miscellaneous support, lifting & transportation and those foundation for oil refinery projects, LNG plant projects, and/or gas processing plant projects: Coordination in terms of structural engineering with client, other disciplines, piping & structural layout engineers, engineering subcontractors etc,. Prepare design specification, standard drawing, work instructions and procedures. Plan structural layout at the initial stage of engineering and update as per requirements and instructions on stick-built or module structures. Structural analysis as per relevant international codes and/or project specifications/guidelines. Control design status and schedule for structural activities. Control cost (man-hour and BQ) for structural activities. Check engineering subcontractors products(3D model, MTO data, design drawing, calculation notes and foundation loading data etc,.) Review vendors drawing and other disciplines drawing. Review 3D model and coordinate structural layout with other disciplines and engineering subcontractors to avoid clashes. Coordination design changes with other disciplines, engineering subcontractor to minimize impact. Communication and coordination with steel fabricators, construction subcontractors and engineering subcontractors. Preferred candidate profile Bachelor's Degree in Structural/Civil Engineering from a recognized university. Experience in design of Onshore & Offshore structures with Area Lead Capability for large oil & Gas / Petrochemical facilities. (Modular Engineering Experience is necessary) Work experience of more than 10 years in all facets of plant structural engineering and design of stick-built /module (onshore and offshore) large Oil & Gas / petrochemical facility development. Knowledge of structural engineering input and output. Knowledge of international code and standards (such as AISC, ASCE, ACI, PIP, Euro and BS etc,.) for steel and concrete structural design. Knowledge of international code and standards (such as ASCE, UBC etc...) for wind load and seismic load. Knowledge of transport analysis of module structure. Knowledge of standard international styles of business communication and experience in the preparation of business and technical documentation. Knowledge of plant facilities (Piping, Electrical, Instrument, Equipment etc.) in oil refinery projects, LNG plant projects, and/or gas processing plant projects. Knowledge of design information of plant facilities (Piping, Electrical, Instrument, Equipment etc,.) in oil refinery projects, LNG plant projects, and/or gas processing plant projects. STAAD PRO operation skills. Basic knowledge of 3D modeling philosophy. Calculation knowledge of connection capacity. Navisworks operation skills. MS office operation skills.

Minimum 10 years of experiencein electrical detailed engineering, FEED and proposal/estimation works andincluding 1 year in engineering/supervisor works at construction sitepreferably in the field of Oil & Gas and Chemicals Workas part of the Electrical Engineering Team with specific responsibilityfor: 1) Overall engineeringexecution for electrical system 2) Preparation of job executionplan, and control/manage quality, bill of quantities, engineering schedule andwork hours 3) Review of input for design 4) Coordination work withinterface disciplines, such as Civil, Piping, Instrument, Building, HSE,Painting, Insulation and others. 5) Manage engineeringsub-contractor (outsource) 4) Coordination work with Client,Vendors, engineering subcontractors and others 5) Design, Prepare, review/checkand approve the following drawings/deliverables: Equipment/materialand design specification, data sheet, calculation Layoutsfor substation, cable way, power/control, lighting, earthing, telecommunication Schematicwiring and connection diagram Detailedelectrical installation drawings Cable andDrum schedule One LineDiagram/Protection & Metering Diagram Systemstudy/Protection relay setting list Inquirypackage, including Requisition for electrical equipment/materials Technicalbid evaluation report 6) Prepare technicalcorrespondence and query to Client 7) Preparation ofEquipment/Material selection and MTO (Material Take-Off) 8) Vendor document review forelectrical and other disciplines 9) Field Engineering work inConstruction site/Module fabrication yard 10) Other necessary work requested/instructed by supervisors Requirements Knowledge of structural engineering input and output. Knowledge of international code and standards (such as AISC, ASCE, ACI, PIP, Euro and BS etc...) for steel and concrete structural design. Knowledge of international code and standards (such as ASCE, UBC etc...) for wind load and seismic load. Knowledge of transport analysis of module structure. Knowledge of standard international styles of business communication and experience in the preparation of business and technical documentation. Knowledge of plant facilities (Piping, Electrical, Instrument, Equipment etc.) in oil refinery projects, LNG plant projects, and/or gas processing plant projects. Knowledge of design information of plant facilities (Piping, Electrical, Instrument, Equipment etc.) in oil refinery projects, LNG plant projects, and/or gas processing plant projects. STAAD PRO operation skills. Calculation knowledge of connection capacity. Navisworks operation skills. MS office operation skills. Direct supervision and checking of the work by junior staff will be required at times. Showing mutual trust and respect in all our working relationships. Respecting diversity and encouraging cooperation and teamwork. Committing to open, transparent, effective, two-way conversation. Benefits Covered under life insurance Covered under group medical insurance (Self, Spouse, Children & Parents) ","Department":"Electrical

Work as part of the Instrumentation Engineering Team with specific responsibility for: Overall engineering execution for I&C design. Coordination work with interface disciplines, such as Civil, Piping, Electrical, Building, HSE, Painting, Insulation and others. Coordination work with Client, Vendors, engineering subcontractors and others. Coordination work to align design interface among internal other teams such as field device, system, analyzer, construction, etc. Prepare, Check and Approve technical bid evaluation report. Design, Prepare, Review and Approve the following drawings/deliverables as majority: - P&ID - Instrumentation design philosophy, ICSS design philosophy, architecture and system configuration - Process Control Narrative and Co-use & Effect - Instrument Index and I/O list - Instrument Data Sheet - Instrument and Valve Calculation Sheet - Data sheet for Online Analyzer and Custody Metering - Instrument Building / Room Layout (Cabinet Layout), Instrument Plot Plan Drawing - Cable Schedule & Cable Layout Drawing - Instrument Wiring and Connection Diagram - Construction Typical Drawing - Field Installation Hook-ups - Preparation of Inquiry package, including Requisitions Prepare technical correspondence and query to Client Preparation of Equipment/Material selection and MTO (Material Take-Off) Vendor document review and approval Field Engineering work in Construction site/Module fabrication yard Other necessary work requested/instructed by supervisors Requirements Bachelors Degree in Electrical/Electronics or similar categories from a recognized university Minimum 12+ years in I&C Engineering Design of LNG, Chemical, Petrochemical and Oil & Gas. Knowledge and experience with Instrument and Control engineering work. Knowledge and experience with IEC and North American codes and international standards and material. Familiarity with Instrument construction material and installation practices. Experience of field engineering in construction site and/or Module Fabrication yard (Preferable). Technical Knowledge and experience with SPI tools and 3D modeling such as PDMS/S3D model. Benefits Covered under life insurance Covered under group medical insurance (Self, Spouse, Children & Parents) Lucrative job offer ","Department":"Instrumentation Department

Role & responsibilities Work as part of the Engineering Team with specific responsibilities & Complete the work as a 3D Designer for oil refinery projects, LNG plant projects, and/or gas processing plant projects: PJ coordination in terms of plot plan and piping layout with client, other disciplines, engineering subcontractors etc.,. Preparing plot plan / piping layout as per relevant international codes and/or project specifications/guidelines. Control status and schedule for piping layout activities. Review vendors drawing. Check deliverables and/or 3D Model submitted from Engineering Subcontractors. Preferred candidate profile Bachelor's Degree or Diploma in Mechanical Engineering from a recognized university. Work experience of more than 10+ years in all facets of Piping Engineering Design of large Oil & Gas/Petrochemical or EPC Projects. Knowledge of ASME B31.3 and other codes and standards such as ASME etc,. Check and/or review of plot plan / piping layout. Navisworks operation skills. Check and/or review of structural loading data for pipe-racks, structures, etc,. Check and/or review of nozzle orientation, platform arrangement for equipment. Check and/or review of LC/LG arrangement. S3D/E3D/AP3D operation skills

Responsible for Architectural and Overall Building Engineering Management related works of Sub Station, Control room, Administration Building, Warehouses, PEB Buildings and Shelters for international projects as described below: Planning of the overall Building EPC execution strategy and its implementation as a leader of the building engineering team, in consultation with JGC HQ (Yokohama) Lead Engineer. Preparation of basic architectural planning and design specifications, including presentation to Client. Supervision of detailed engineering and BIM works executed by 3rd party engineering / BIM modelling consultants including engineering quality and schedule control. This may include visits to BIM consultants office, likely in an Indian city. Review and approval of Architectural drawings issued by 3 rd party engineering sub-contractor. Client coordination and Client comment resolution. Engineering management work to lead integrate the overall building engineering among each building discipline (Structural and MEP) engineers. Engineering coordination work among other plant discipline engineers (e.g Civil, Piping, Mechanical, E&I). Procurement support work related to vendor selection, purchasing, and technical advising for building procurement items such as structural steel, HVAC equipment/panels, Power panels and Fire alarm panels in consultation with respective discipline engineers & JGC HQ (Yokohama) Building Engineer Construction support work related to subcontractor selection, contracting, field engineering and trouble shooting. This may include visits to site. Requirements 5+ years experience in Building Architectural design work of Plant / Non-Plant Buildings including some experience in Overall Building Engineering management (Experienced in design or/and field supervision/engineering in international projects is an advantage) Business level communication skills of oral and written English. Showing mutual trust and respect in all our working relationships. Respecting diversity and encouraging cooperation and teamwork. Committing to open, transparent, effective, two-way conversation Mentoring and training of junior engineers / GETs within the department. High attention to detail and proactive follow up Work location shall be India based.

Role & responsibilities Work as part of Project Engineering Team, Under the work instruction of the Project Manager or Project Engineering Manager, he/ she assists a part of the following project management or engineering management duties. Issue necessary instruction to personnel assigned to the project. Prepare project procedures and project control plans. Control cost, schedule and revenue status of the project according to the established plan. Monitor and assess the performance of project activities in his/her responsibility. Propose corrective actions for any unsatisfactory situation and take action per the Project Manager's or Engineering Manager's instruction. Control HSE and Quality for his/her part of the project. Maintain communication and coordination among Client, Joint Venture partner, vendor, subcontractor and JGC internally according to the established procedures. Continuously monitor and assess the performance of his/her assigned scope from time to time. Initiate or inform superior of the need for corrective action promptly in all unsatisfactory situations. Accountable to the Project Manager or Project Engineering Manager. Preferred candidate profile Bachelor's Degree in Engineering from a recognized university or equivalent More than 5 years in EPC project engineering management or project management work experience for various overseas plant projects (gas processing, LNG, petroleum refining, petrochemical, chemical, nuclear power, etc.) Experience in coordination work in English with overseas customers, subsidiaries, licensors, vendors, contractors, etc. Negotiation and coordination with customers, vendors and sub-contractors Coordination with design and execution departments of internal and overseas subsidiaries Manage EPC execution elements such as costs, change claims and risks Management Operation and management of people, goods, money, and information

Role & responsibilities Work as a Senior Machinery/Packaged Equipment Engineer handling various machinery and packaged equipment. The responsibilities and duties in the experience desire to cover the following aspects. -Being responsible for the engineering of industrial machinery and packaged equipment throughout EPC, and lead, delegate tasks and organize the team -Assisting equipment cost estimation for machinery and packaged equipment in EPC bidding task -Preparing RFQ document package for machinery and packaged equipment -Conducting technical bid evaluation of machinery and packaged equipment vendor quotation and preparing selected vendor recommendation -Conducting machinery and packaged equipment vendor document review for technical assurance after placing order to the vendor -Making engineering information and coordination with the other disciplines -Coordination and negotiation with customers Preferred candidate profile Bachelor's Degree in Mechanical Engineering from a recognized university Work experience of more than 10 years for Engineering Design of industrial machinery or packaged equipment for Oil & Gas / petrochemical facility, chemical, power plant. -Schedule planning/management of static equipment RFQ, technical bid evaluation, order placement, after order detailed engineering -Ability to identify risks, ability to assess customer requirements and based which to coordinate the relevant static equipment vendors and the customer. -Ability of communication and collaboration with various parties involved in the project/trouble -A high standard of English language ability both written and spoken -Ability to use the Microsoft Office environment in all aspects of daily work -Highly ethical - accountable for actions and statements -High attention to detail and proactive follow up -The willingness to take responsibility as delegated and make decisions at appropriate times within the authority level -Striving for excellence in efficiency, safety and profitability

Role & responsibilities Work experience of more than 8 years in all facets of Civil Engineering Design of Oil & Gas petrochemical facility development. Work as part of the Civil Engineering Project Team with specific responsibility for: - Underground drainage design - Roads, pavings, trenches design - Concrete foundation design Building design capability will be considered as additional skill Preferred candidate profile A high standard of English language ability both written and spoken. Ability to use the Microsoft Office environment in all aspects of daily work. Highly ethical - accountable for actions and statements. The leadership qualities to lead, delegate tasks and organize the team. Ability to understand and interpret complex problems and explain them to others. High attention to detail and proactive follow up. The willingness to take responsibility as delegated and make decisions at appropriate times within the authority level. Striving for excellence in efficiency, safety and profitability. Understanding of Plant engineering for Oil & Gas, Plant drainage systems & underground structures, concrete foundation design. Knowledge of the following design software packages Mentoring and training of junior engineers GETs within the department. Direct supervision and checking of the work by designers will be required Showing mutual trust and respect in all our working relationships. Respecting diversity and encouraging cooperation and teamwork. Committing to open, transparent, effective, two-way conversation.

Role & responsibilities Work as part of the Structural Engineering Team with specific responsibilities & Complete the work as a Structural lead engineer of pipe-rack, equipment supporting structure, shelter, platform, miscellaneous support, lifting & transportation and those foundation for oil refinery projects, LNG plant projects, and/or gas processing plant projects: Coordination in terms of structural engineering with client, other disciplines, piping & structural layout engineers, engineering subcontractors etc,. Prepare design specification, standard drawing, work instructions and procedures. Plan structural layout at the initial stage of engineering and update as per requirements and instructions on stick-built or module structures. Structural analysis as per relevant international codes and/or project specifications/guidelines. Control design status and schedule for structural activities. Control cost (man-hour and BQ) for structural activities. Check engineering subcontractors products(3D model, MTO data, design drawing, calculation notes and foundation loading data etc,.) Review vendors drawing and other disciplines drawing. Review 3D model and coordinate structural layout with other disciplines and engineering subcontractors to avoid clashes. Coordination design changes with other disciplines, engineering subcontractor to minimize impact. Communication and coordination with steel fabricators, construction subcontractors and engineering subcontractors. Preferred candidate profile Bachelor's Degree in Structural/Civil Engineering from a recognized university. Experience in design of Onshore & Offshore structures with Area Lead Capability for large oil & Gas / Petrochemical facilities. (Modular Engineering Experience is necessary) Work experience of more than 10 years in all facets of plant structural engineering and design of stick-built /module (onshore and offshore) large Oil & Gas / petrochemical facility development. Knowledge of structural engineering input and output. Knowledge of international code and standards (such as AISC, ASCE, ACI, PIP, Euro and BS etc,.) for steel and concrete structural design. Knowledge of international code and standards (such as ASCE, UBC etc...) for wind load and seismic load. Knowledge of transport analysis of module structure. Knowledge of standard international styles of business communication and experience in the preparation of business and technical documentation. Knowledge of plant facilities (Piping, Electrical, Instrument, Equipment etc.) in oil refinery projects, LNG plant projects, and/or gas processing plant projects. Knowledge of design information of plant facilities (Piping, Electrical, Instrument, Equipment etc,.) in oil refinery projects, LNG plant projects, and/or gas processing plant projects. STAAD PRO operation skills. Basic knowledge of 3D modeling philosophy. Calculation knowledge of connection capacity. Navisworks operation skills. MS office operation skills.

Role & responsibilities Bachelor's degrees from a recognized university Work Experience of more than 10+ years in total as International Oil and Gas EPC Contractor's home office Logistics Coordinator for Equipment and Material being sourced from international suppliers, required for plant facility. Duration of total experience could be less than 5 years, if it could be substituted by the below, but majority should be as Logistics Coordinator of EPC Contractor: - Logistics Coordinator of International Freight Forwarder - Maritime Engineer of Breakbulk Shipping Carrier - Transport Engineer of Heavy haul Transporter - Overall Logistics Planning and Control - Issue Project Shipping Specifications and Procedures - Project Shipping Execution both offshore and onshore Preferred candidate profile A high standard of English language ability both written and spoken. -Ability to use the Microsoft Office environment in all aspects of daily work. -Highly ethical - accountable for actions and statements. -The leadership qualities to lead, delegate tasks and organize the team. -Ability to understand and interpret complex problems and explain them to others. -High attention to detail and proactive follow up. -The willingness to take responsibility as delegated and make decisions at appropriate times within the authority level. -Striving for excellence in efficiency, safety and profitability. -Basic understanding for international trade terms and shipping terms as Logistics Coordinator. -Deep underling for the shipping execution for ocean transportation, air transportation, multimodal transportation, inland transportation, customs formalities and duty exemption scheme for Plant Facility. -Showing mutual trust and respect in all our working relationships. -Respecting diversity and encouraging cooperation and teamwork. -Committing to open, transparent, effective, two-way conversation.

Role & responsibilities Work as part of the Instrumentation Engineering Team with specific responsibility for: Overall engineering execution for I&C design. Coordination work with interface disciplines, such as Civil, Piping, Electrical, Building, HSE, Painting, Insulation and others. Coordination work with Client, Vendors, engineering subcontractors and others. Coordination work to align design interface among internal other teams such as field device, system, analyzer, construction, etc. Prepare, Check and Approve technical bid evaluation report. Design, Prepare, Review and Approve the following drawings/deliverables as majority: - P&ID - Instrumentation design philosophy, ICSS design philosophy, architecture and system configuration - Process Control Narrative and Co-use & Effect - Instrument Index and I/O list - Instrument Data Sheet - Instrument and Valve Calculation Sheet - Data sheet for Online Analyzer and Custody Metering - Instrument Building / Room Layout (Cabinet Layout), Instrument Plot Plan Drawing - Cable Schedule & Cable Layout Drawing - Instrument Wiring and Connection Diagram - Construction Typical Drawing - Field Installation Hook-ups - Preparation of Inquiry package, including Requisitions Prepare technical correspondence and query to Client Preparation of Equipment/Material selection and MTO (Material Take-Off) Vendor document review and approval Field Engineering work in Construction site/Module fabrication yard Other necessary work requested/instructed by supervisors Preferred candidate profile Bachelor's Degree in Electrical/Electronics or similar categories from a recognized university Minimum 10+ years in I&C Engineering Design of LNG, Chemical, Petrochemical and Oil & Gas. Knowledge and experience with Instrument and Control engineering work. Knowledge and experience with IEC and North American codes and international standards and material. Familiarity with Instrument construction material and installation practices. Experience of field engineering in construction site and/or Module Fabrication yard (Preferable). Technical Knowledge and experience with SPI tools and 3D modeling such as PDMS/S3D model.

Role & responsibilities The following tasks will be carried out in accordance with the Information Management Plan prepared by IM Manager. (1) Analyze Client's information handover requirements (including analysis and evaluation of their data models and Client's Information handover target system) (2) Coordination with internal and external parties to ensure data collection with necessary quality (including preparation of data flow, workflow, and procedures) (3) Creation of Template for data collection from Vendors (4) Creation of integration plan of information systems, such as Hexagon and Aveva authoring tools, that need to be used for data collection and storage (5) Control the budget and man-hour required for Information Management activities including Information Handover to Client (6) Provide work instructions to the Data Manager (including quality check of his deliverables) Preferred candidate profile Bachelor's Degree in Mechanical /Chemical Engineering / Computer Science from a recognized university Minimum 8+ years experience of information handover to process plant owner company as a part of EPC project execution for more than 2 EPC projects Deep understanding and skills of the following fields; (1) Information management (2) IT systems used in a Process Plant EPC project (3) IT systems used in a process plant owner company for operation and maintenance activities (4) Basic knowledge about network technology, cloud services, such as Microsoft Azure, O365, AWS and cybersecurity (5) Basic Database skills, such as Oracle and MSSQL (6) Technical writing skills (7) Basic knowledge about CFIHOS RDL