Pipe Fitter in an Interior Fit-Out context are distinct from those in heavy industrial or construction projects, focusing specifically on the mechanical systems within a commercial or residential space being completed or renovated (e.g., offices, high-end retail, restaurants, apartment buildings). This role emphasizes precision, coordination with aesthetic finishes, and work on medium-to-low pressure systems, often in HVAC and specialized plumbing. Pipe Fitter Responsibilities in Interior Fit-Out1. HVAC and Mechanical Systems Installation Chilled/Hot Water Piping (Hydronic Systems): Installing and connecting the piping network for HVAC systems, including chilled water supply and return lines, hot water heating lines, and condensate drain piping. Terminal Unit Connections: Connecting piping to key terminal units within the fitted-out space, such as Fan Coil Units (FCUs) , Air Handling Units (AHUs) , and Variable Refrigerant Flow (VRF) systems. Boiler and Chiller Hookups: Installing and connecting pipes and fittings to mechanical room equipment (boilers, pumps, expansion tanks, and sub-meters) that serve the fit-out area. Ductwork and Insulation: While often separate, coordinating with HVAC technicians and ensuring proper installation of pipe insulation to meet energy efficiency and anti-condensation requirements. 2. Specialized Plumbing and Utility Installation Domestic Water Systems: Fabricating and installing specialized domestic water supply piping (hot and cold) to kitchens, restrooms, and utility areas, using materials like copper, galvanized, or PEX, based on fit-out specifications. Drainage Systems (Limited Scope): Installing floor drains, connecting specialized drainage for commercial kitchen equipment, or installing new drain lines where the fit-out dictates a change in fixture location. Gas/Fuel Piping: Installing and testing piping for natural gas or propane that may be required for commercial kitchen equipment (e.g., ovens, cooktops) or specialized mechanical equipment. 3. Precision, Aesthetics, and Coordination Spatial Planning: Working in close collaboration with interior designers and general contractors to ensure pipe routing is hidden, fits within tight ceiling plenums, walls, and floor voids, and avoids aesthetic clashes. Penetration Management: Carefully managing and sealing all pipe penetrations through fire-rated walls, floors, and ceilings to maintain fire separation integrity. Quality Finishes: Ensuring all exposed piping (if part of an industrial/exposed design) is fabricated, joined, and finished to a high aesthetic standard. System Testing: Conducting hydrostatic, pneumatic, and pressure tests on all newly installed piping segments to certify them as leak-free and compliant before walls and ceilings are closed up. 4. Documentation and Safety Drawing Compliance: Strictly adhering to MEP (Mechanical, Electrical, and Plumbing) coordination drawings and red-lining any field modifications for As-Built documentation. Code Adherence: Ensuring all work complies with specific local building codes and plumbing standards relevant to the commercial or residential facility. Site Safety: Maintaining a clean and safe work area, which is particularly critical in finished or partially-finished fit-out environments. Job Type: Full-time Pay: Up to ₹40,000.00 per month
Fit-Out Duct Installers Fabrication, Measurement and Interpretation Blueprint Analysis: Reading and accurately interpreting detailed HVAC shop drawings, reflected ceiling plans (RCPs) , and MEP coordination drawings to determine duct routing, size, and layout within the confined space of a fit-out. Fabrication: Measuring, cutting, shaping, and fitting various duct materials—including Galvanized Iron (GI), Pre-Insulated (PI) panels, and flexible ducts —using hand and power tools to create elbows, transitions, offsets, and straight runs. Support Installation: Marking and installing supporting structures, such as trapeze hangers, threaded rods, and brackets , ensuring they are correctly positioned, level, and strong enough to safely support the entire duct system according to SMACNA standards (Sheet Metal and Air Conditioning Contractors' National Association). 2. Installation and Sealing Assembling Ductwork: Assembling and securing duct sections and fittings, often working in tight ceiling plenums and elevated areas. Airtight Sealing: Crucially, sealing all duct joints and seams meticulously with approved sealants (e.g., mastic or specialized tape) to prevent air leakage, which is vital for system efficiency and code compliance. Insulation: Installing the specified thermal and acoustic insulation and vapor barriers around the ductwork to prevent energy loss and condensation, coordinating with other trades to prevent damage to the insulation. Accessory Installation: Installing necessary duct accessories, including Volume Control Dampers (VCDs) for air balancing, Fire Dampers (FDs) for safety, and access doors for future maintenance and inspection. 3. Coordination and Finishing Trade Coordination: Working actively with other site trades (Electricians, Plumbers, and Fire Suppression teams) to resolve clashes and ensure duct runs do not obstruct other essential systems or structural elements. Terminal Installation: Installing grilles, registers, diffusers, and linear slots onto the ductwork, ensuring they are perfectly aligned with the architectural ceiling and wall finishes for aesthetic completeness. Air Balance Preparation: Ensuring all installed VCDs and access points are ready for the HVAC Technician to conduct the final Testing, Adjusting, and Balancing (TAB) procedures to achieve the correct airflow rates (CFM). Quality and Safety: Adhering to all site-specific safety protocols, local building codes, and HVAC installation standards to guarantee a safe, durable, and highly efficient air distribution system. Job Type: Full-time Pay: Up to ₹40,000.00 per month
Pipe Fitter in an Interior Fit-Out context are distinct from those in heavy industrial or construction projects, focusing specifically on the mechanical systems within a commercial or residential space being completed or renovated (e.g., offices, high-end retail, restaurants, apartment buildings). This role emphasizes precision, coordination with aesthetic finishes, and work on medium-to-low pressure systems, often in HVAC and specialized plumbing. Pipe Fitter Responsibilities in Interior Fit-Out1. HVAC and Mechanical Systems Installation Chilled/Hot Water Piping (Hydronic Systems): Installing and connecting the piping network for HVAC systems, including chilled water supply and return lines, hot water heating lines, and condensate drain piping. Terminal Unit Connections: Connecting piping to key terminal units within the fitted-out space, such as Fan Coil Units (FCUs) , Air Handling Units (AHUs) , and Variable Refrigerant Flow (VRF) systems. Boiler and Chiller Hookups: Installing and connecting pipes and fittings to mechanical room equipment (boilers, pumps, expansion tanks, and sub-meters) that serve the fit-out area. Ductwork and Insulation: While often separate, coordinating with HVAC technicians and ensuring proper installation of pipe insulation to meet energy efficiency and anti-condensation requirements. 2. Specialized Plumbing and Utility Installation Domestic Water Systems: Fabricating and installing specialized domestic water supply piping (hot and cold) to kitchens, restrooms, and utility areas, using materials like copper, galvanized, or PEX, based on fit-out specifications. Drainage Systems (Limited Scope): Installing floor drains, connecting specialized drainage for commercial kitchen equipment, or installing new drain lines where the fit-out dictates a change in fixture location. Gas/Fuel Piping: Installing and testing piping for natural gas or propane that may be required for commercial kitchen equipment (e.g., ovens, cooktops) or specialized mechanical equipment. 3. Precision, Aesthetics, and Coordination Spatial Planning: Working in close collaboration with interior designers and general contractors to ensure pipe routing is hidden, fits within tight ceiling plenums, walls, and floor voids, and avoids aesthetic clashes. Penetration Management: Carefully managing and sealing all pipe penetrations through fire-rated walls, floors, and ceilings to maintain fire separation integrity. Quality Finishes: Ensuring all exposed piping (if part of an industrial/exposed design) is fabricated, joined, and finished to a high aesthetic standard. System Testing: Conducting hydrostatic, pneumatic, and pressure tests on all newly installed piping segments to certify them as leak-free and compliant before walls and ceilings are closed up. 4. Documentation and Safety Drawing Compliance: Strictly adhering to MEP (Mechanical, Electrical, and Plumbing) coordination drawings and red-lining any field modifications for As-Built documentation. Code Adherence: Ensuring all work complies with specific local building codes and plumbing standards relevant to the commercial or residential facility. Site Safety: Maintaining a clean and safe work area, which is particularly critical in finished or partially-finished fit-out environments. Job Type: Full-time Pay: Up to ₹40,000.00 per month
AC Technicians (Interior Fit-Out)1. Installation and System Modification Unit Installation: Installing various types of air conditioning units required for the fit-out, including ducted split units, ducted/non-ducted Fan Coil Units (FCUs), Air Handling Units (AHUs), Variable Refrigerant Flow (VRF) systems, and cassette/package units. Refrigerant Piping: Fabricating, installing, brazing, and insulating copper refrigerant piping and copper or PEX chilled water piping, ensuring all connections are leak-free and pressure-tested. Ductwork Installation: Installing, modifying, and balancing Galvanized Iron (GI) or Pre-Insulated (PI) ductwork and flexible ducts to match the new layout and ceiling design, coordinating closely with interior designers for aesthetic clearances. Grilles and Diffusers: Precisely installing air supply and return grilles, diffusers, and linear slots according to the reflected ceiling plans (RCP) to ensure even air distribution and alignment with architectural finishes. 2. Testing, Commissioning, and Handover Commissioning: Performing comprehensive pre-commissioning checks and final commissioning of all installed HVAC units and systems to verify they operate according to design specifications. Air Balancing: Carrying out Testing, Adjusting, and Balancing (TAB) procedures to ensure correct airflow rates (CFM) are delivered to each new zone and room as per the final design load. Controls & Wiring: Installing and connecting control wiring, thermostats, sensors, and integrating components into the Building Management System (BMS) or independent control panels. Troubleshooting: Diagnosing and resolving electrical, mechanical, and refrigerant faults that arise during and after installation, often under pressure to meet handover deadlines. 3. Coordination and Documentation Drawing Interpretation: Reading and interpreting detailed HVAC shop drawings, mechanical schematics, load calculations, and architectural reflected ceiling plans to execute work accurately. Trade Coordination: Actively participating in MEP (Mechanical, Electrical, and Plumbing) coordination meetings to ensure that HVAC ducting and piping do not clash with electrical conduits, lighting fixtures, or plumbing lines. Quality Assurance: Ensuring all installations meet required safety standards, local building codes, and manufacturer specifications. Documentation: Preparing and updating "As-Built" drawings to reflect any final changes made on-site and completing detailed test and commissioning reports. Job Type: Full-time Pay: Up to ₹40,000.00 per month
Fit-Out Duct Installers Fabrication, Measurement and Interpretation Blueprint Analysis: Reading and accurately interpreting detailed HVAC shop drawings, reflected ceiling plans (RCPs) , and MEP coordination drawings to determine duct routing, size, and layout within the confined space of a fit-out. Fabrication: Measuring, cutting, shaping, and fitting various duct materials—including Galvanized Iron (GI), Pre-Insulated (PI) panels, and flexible ducts —using hand and power tools to create elbows, transitions, offsets, and straight runs. Support Installation: Marking and installing supporting structures, such as trapeze hangers, threaded rods, and brackets , ensuring they are correctly positioned, level, and strong enough to safely support the entire duct system according to SMACNA standards (Sheet Metal and Air Conditioning Contractors' National Association). 2. Installation and Sealing Assembling Ductwork: Assembling and securing duct sections and fittings, often working in tight ceiling plenums and elevated areas. Airtight Sealing: Crucially, sealing all duct joints and seams meticulously with approved sealants (e.g., mastic or specialized tape) to prevent air leakage, which is vital for system efficiency and code compliance. Insulation: Installing the specified thermal and acoustic insulation and vapor barriers around the ductwork to prevent energy loss and condensation, coordinating with other trades to prevent damage to the insulation. Accessory Installation: Installing necessary duct accessories, including Volume Control Dampers (VCDs) for air balancing, Fire Dampers (FDs) for safety, and access doors for future maintenance and inspection. 3. Coordination and Finishing Trade Coordination: Working actively with other site trades (Electricians, Plumbers, and Fire Suppression teams) to resolve clashes and ensure duct runs do not obstruct other essential systems or structural elements. Terminal Installation: Installing grilles, registers, diffusers, and linear slots onto the ductwork, ensuring they are perfectly aligned with the architectural ceiling and wall finishes for aesthetic completeness. Air Balance Preparation: Ensuring all installed VCDs and access points are ready for the HVAC Technician to conduct the final Testing, Adjusting, and Balancing (TAB) procedures to achieve the correct airflow rates (CFM). Quality and Safety: Adhering to all site-specific safety protocols, local building codes, and HVAC installation standards to guarantee a safe, durable, and highly efficient air distribution system. Job Type: Full-time Pay: Up to ₹40,000.00 per month
Key Responsibilities for Fit-Out Electricians1. Planning and Design Interpretation Blueprint Analysis: Reading and accurately interpreting architectural drawings, interior design layouts, and mechanical/electrical schematics to determine the placement of all electrical components. Shutterstock Electrical Planning: Developing or reviewing electrical layout plans , load schedules , and circuiting plans to ensure the design is technically feasible and meets the required electrical load. Coordination: Collaborating closely with other trades (e.g., HVAC, plumbing, carpentry, interior designers) to ensure electrical conduits and fixtures are seamlessly integrated into ceilings, walls, and flooring systems, often within very tight spaces. 2. Specialized Installation Work Lighting Systems: Installing a variety of specialized and decorative lighting fixtures, including recessed lighting, track lighting, chandeliers, architectural lighting, and LED strip lighting , often involving complex controls (e.g., dimmers, smart systems). Power and Data Points: Installing, connecting, and testing power sockets, floor boxes, data/communication outlets , and specialized connections for high-demand equipment (e.g., kitchen appliances, server rooms). Distribution Boards (DBs): Installing and connecting sub-main distribution boards and circuit breaker panels as required by the new fit-out layout. ELV (Extra-Low Voltage) Systems: Installation and wiring for low-voltage systems, which are critical in modern fit-outs: Security and Access Control (CCTV, door entry systems). Fire Alarm Systems. Data and Network Cabling. Building Management Systems (BMS). 3. Compliance, Testing, and Handover Code Compliance: Ensuring all electrical installations strictly comply with local authority electrical codes and safety regulations (e.g., NEC or specific regional codes). Inspection and Testing: Performing rigorous continuity, insulation resistance, and functional tests on all new and modified electrical systems before project handover. Troubleshooting: Rapidly diagnosing and rectifying any electrical defects or "snags" identified during final inspections to meet strict project deadlines. Documentation: Preparing and maintaining necessary project documentation, including test reports and As-Built Drawings (final diagrams showing the installed system). Job Type: Full-time Pay: From ₹40,000.00 per month