Purpose of Function This position is responsible for delivering all aspects of the Supplier Quality Assurance function. Ensuring the product quality of supplier manufactured products & processes. Responsible for ensuring that the products produced meet quality standards required to minimize quality costs and maximized customer satisfaction whilst ensuring that procedures and processes are adhered to, Tasks and Responsibilities Support new product launches to ensure that supplier quality meets the required. Prepared and analyze supplier evaluation and audits, and take appropriate actions where evaluation results out of target. Performed Supplier improvement program for key suppliers and monitor progress to achieve 1000 ppm. Work with Engineering (Design and Manufacturing Engineers) team to define process parameters and criteria to ensure supplier process capability is effective to meet product and process requirements. Lead the supplier approval process by assessing manufacturing/technology capabilities and Health, Safety and Environmental risks. Good knowledge and hands on experience in conducting technical audits/process audits for plating, powder coating, special process and achieve target ppm. Good knowledge and hands on experience in inspection of mechanical components like Casting, Seals, Plastics, Sheet metal, Cables, PCBA’s commodities. Perform Quality systems, Technical and Process audits at suppliers’ place. Part qualification through PPAP (FAI) process and perform process qualification audits for critical components. Perform SPC/SQC for key products and processes. Facilitate SCAR / CAPA and Perform on-site supplier visits for root cause analysis and verification of correction actions of supplier quality issues. Collate and evaluate supplier quality data to identify process improvement opportunities within the supply chain Work with the supplier directly, create correction action plans to address process failures. Review supplier manufacturing processes, collaborate with suppliers on process improvement and value enhancement opportunities. Promote the use of customer preferred techniques for continuous Improvement such as Lean, Six-Sigma, Poka-Yoke (Error Proofing), Measurement System Analysis, and Process Failure Mode and Effects analysis. (PFMEA). Provide concise, complete and accurate documentation of inspection. Results relative to area of responsibility. In appropriate functional areas. This refers to supporting inspection and test status requirements defined by regulations, engineering product specifications or Control Plans. Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers. Support the Quality Manager to monitor and report on supplier product quality and performance. Hands on experience in preparing and review control plans for manufacture processes. Report on Key Performance Indicators (KPIs) in order to adhere to process and prevent occurrence of any non-conformity relating to product, process or system. Perform First Article inspection and sample approvals. Participate in cross-functional teams in the development of new products or changes related to current products in meeting customer requirements! Contribute to continuous improvement activities. Quality control of work by appropriate reviews Stay current and up to date on any changes that may affect the supply and demand of needed products and materials and advise others of any Impact. Support technicians and engineers. Communicate efficiently throughout the shop floor and with own and customer’s management. Liaise and communicate with other departments, customers, suppliers and other service providers. Support in Quality process implementation and internal audits. Education Engineering Degree/Diploma in Mechanical Related Experience 7 to 10 years of working experience in manufacturing industry preferably medical devices. Experience of working in Quality Assurance Experience of Supplier quality developments ( Audits, Improvements, Part Qualification, Performance monitoring for suppliers ) Experience of dealing with customers and suppliers Experience in testing, calibration, and documentation Skills & Attributes: Knowledge of quality and business systems Knowledge of Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Failure Mode and Effect Analysis (FMEA),SPC,SQC Knowledge of CE Marking, ROHS,REACH requirements Knowledge of ISO 9001/13485 Knowledge of ISO45001/14001 Knowledge of measurement techniques Metrology, Inspection Methods and Equipment Knowledge of Six sigma method – DMAIC Understanding and interpretation of engineering drawings Understanding manufacturing processes. General Competencies - Good communication and interpersonal skills Logical & Rational Tactful Result oriented. Attention to details. Team player Show more Show less

Purpose of Function: To ensure legal, compliance and secretarial compliance for the company. Tasks and Responsibilities: Company Secretary Assistance in Drafting and preparation of all the board, committee and general meeting notices, agendas, notes to agenda, attendance sheet and respective minutes of the aforesaid meetings. Assistance in drafting and preparing necessary board resolutions, circular resolutions, and members resolutions, as may be required by the Companies from time to time. To prepare and update the statutory registers as per Companies Act, 2013. To prepare and file all the statutory forms as required from time to time as per Companies Act, 2013 and ROC’s directions. To coordinate with accounts team and other internal stakeholders to carry out secretarial work. To prepare necessary documents and make necessary filing with Reserve Bank of India (“RBI”) as the case may be. To do all such work, as may be required and assigned from time to time. Legal To assist in legal work as may be required and assigned from time to time. Key Skills and Requirements Ability to communicate clearly (written and oral). Ability to collaborate with cross functional teams and have excellent stakeholder management skills. Ability to establish, develop and maintain good relationships with internal and external stakeholders across levels. Good attention to detail including when operating under pressure. Ability to multitask competing priorities and deliver the tasks assigned in a timely and efficient manner.

*Immediate Joiners Preferred* Purpose of Function This position plays a crucial role in ensuring the efficient and effective management of inventory levels and material flow within the organization. This position involves advanced planning, coordination, and control of inventory and materials to support production schedules and customer demands. The MRP Controller also provides mentorship and guidance to junior team members, driving continuous improvement in MRP processes and strategies. Tasks and Responsibilities Daily Planning Process: Generation of weekly/daily ordering schedules Plan and release abnormal demand report ensuring decisions are focused on what is best for the whole customer base. Plan and release intercompany orders using our Draeger bespoke plant to plant process (ZPTP) Review Draeger bespoke forecasting tool (ZDPS) for items which fall outside of acceptable stocking parameters and ensure most suitable options are utilized. Master Data Creation & Maintenance Manage deletion workflows to ensure master data on obsolete items is up to date in the SAP system. Working alongside material expediting you will periodically review safety stocks on inbound materials to ensure continuity in supply whilst also maintaining cycle turn targets. Periodically review abnormal demand quantities based on global guidelines. Material master data (MRP relevant) maintenance and optimization. Periodically review lot size parameters based on global guidelines using ABC/XYZ methodologies. Make any necessary adjustments to the SAP system to minimize slow moving stock or dead inventory. All exceptions are to be flagged in SAP using the low cycle turns indicator for reporting purposes. Maintain planning profile on materials which are deemed as suitable for forecasting based on analysis of past sales and business plans. Business Support Provide general support to production helping to resolve booking issues and other ad-hoc requests which could impact customer OTIF or create inaccuracies within the system. Where possible create works orders to handle rework requests and seek opportunities to release blocked stock into unrestricted. Provide information to the warehouse function on overdue line items Material Supply and availability assurance Release Purchase orders with given appropriate order specification. Ensure material available on time according to sales requirement with close tracking and adjustment of material delivery time. Non-conforming material, Missing parts claim handling and support Support material localization and new product/Project Order management and Delivery fulfilment Production order release and management. Customer order material availability confirm and delivery fulfilment. Delivery priority alignment with order management Advanced Material Requirements Planning: Develop and manage complex MRP plans and schedules, considering multiple variables such as production forecasts, lead times, and demand variability. Optimize MRP parameters including safety stock levels, reorder points, and order quantities to balance inventory costs and service levels. Ensure timely availability of materials for production while minimizing excess inventory. Strategic Inventory Management: Conduct in-depth inventory analysis to identify trends, inefficiencies, and opportunities for improvement. Implement strategies to reduce excess and obsolete inventory, improve turnover rates, and enhance overall inventory health. Coordinate and oversee physical inventory count and reconciliations, ensuring accuracy and completeness. Data Analysis and Reporting: Utilize advanced analytical tools and techniques to generate detailed inventory reports and dashboards. Provide actionable insights and recommendations to senior management based on data analysis. Monitor key performance indicators (KPIs) related to inventory and MRP performance, driving continuous improvement initiatives. Position requirements: Bachelor’s degree in supply chain management, Business Administration, Industrial Engineering, or a related field. 5-7 years of experience in MRP, inventory management, or supply chain management. Proven experience with advanced MRP/ERP systems (e.g., SAP, Oracle, Microsoft Dynamics). Required Related Experience IT literate and knowledge of Microsoft Office SAP knowledge preferred but, on the job, training can be provided. Capacity for analytical thinking Skills, Special Competencies, or Certifications Advanced analytical and problem-solving skills. Proficiency in using MRP/ERP systems and advanced Microsoft Excel functions. Excellent organizational and time management abilities. Strong leadership and team collaboration skills. Effective communication and interpersonal skills. High attention to detail and accuracy. Ability to manage complex projects and multiple priorities simultaneously.

About us: At Dräger, it is our passion and dedication to protect, support and save lives. Our dedication to life naturally extends to the quality of our employees’ lives. They are the essence of our company, and without them, we would not be what we are today – a world leader in medical and safety technology. We are searching for people who want to join us in building “Technology for Life”. Specific Skill set required to perform the Job: Experience in Medical Product development as a system designer preferably Anesthesia, Ventilators, and patient Monitors. Proficiency in systems engineering and meticulous requirements management. Overall understanding of Product Design, Reliability, Regulations, Serviceability, Safety, and Security Protocols. Proficient in translating Customer/Product Requirements and Technical System Requirements into detailed Subsystem/Unit requirements. Sound understanding of system, software, and hardware architecture. Collaborate closely with SW and HW teams to implement system designs, offering guidance and support throughout the development lifecycle. Prepare Technical system requirements and conduct thorough reviews with cross-functional teams. Ensure traceability between TSR to TSSRs and Risk management files. Good understanding of ISO 14971 and the Risk management process. Familiarity with Electronics/Electrical/Embedded/SW Design interfaces and key component selection. Good knowledge of FMEA and ability to drive DFMEA at system and sub-system levels. Exceptional problem-solving skills, with a sharp analytical mindset. Proficient in developing System integration plans, conducting tests, and generating reports. Excellent documentation and reporting capabilities. Strong collaborative skills, adept at working with cross-functional teams. Proficient in identifying the relevant global regulations and standards applicable to medical product development. Collaborate with cross-functional teams to plan system integration revisions. Specific Software/ IT Knowledge required: PLM tools, Requirement management tools, IBM DOORs, RQM, JIRA, ClearQuest, HP ALM, etc. Take Ownership and Collaborate with CFTM Good in Communication Lead and Drive System Design and Development Experience: 10 - 20 years of experience in Medical Product development as a system designer.

Purpose of Function: The Assistant Project Manager will play a crucial role in driving project-based sales and expanding business opportunities in the North Zone . This role requires strong expertise in selling hospital infrastructure solutions , including Medical Gas Pipeline Systems, Modular OTs, and Integration Solutions . The candidate will be responsible for managing projects from initiation to handover , working closely with internal teams and external stakeholders to ensure seamless execution. Tasks and Responsibilities: Sales & Business Development Identify brownfield and greenfield hospital projects and position the company as a preferred turnkey solution provider. Develop and maintain strong relationships with hospital administrators, architects, consultants, procurement heads, and project teams. Identify and collaborate with dealers/partners to expand market reach. Drive tender participation and handle the entire tender process effectively. Negotiate, close deals, and ensure successful contract execution. Project Management & Execution Develop business plans and sales strategies for new hospital projects in the region. Plan and execute projects based on customer and partner requirements, ensuring smooth coordination across departments. Work closely with internal project teams to improve market coverage and sales conversion rates. Establish and maintain contacts with key stakeholders, investors, architects, and planners to generate new business. Target Achievement & Strategy Execution Own and drive the project business strategy to achieve regional sales targets. Maintain an adequate sales funnel to ensure a high hit rate and consistent revenue growth. Collaborate with cross-functional teams to ensure smooth execution and project excellence. Travel Requirement The role involves extensive travel across North India to meet clients, partners, and project teams. Key Requirements: Industry Knowledge - Strong background in selling Medical Gas Pipeline Systems, Modular OTs, and hospital integration solutions. Skills: Excellent sales, negotiation, and business development skills. Strong knowledge of tendering, contract management, and project execution. Ability to build and maintain client relationships with key decision-makers. Good understanding of hospital infrastructure planning and execution. Position Requirements: Education - Degree / Diploma in Engineering Related Experience - In hospital Project sales, 4 – 8 years