397 Compressors Jobs

You will be responsible for installing, maintaining, and troubleshooting industrial refrigeration systems, cold rooms, chillers, freezers, and their associated controls. Your primary focus will be on conducting preventive and reactive maintenance on cooling systems to ensure consistent temperature control for perishable goods. Monitoring refrigerant levels, handling charging, recovery, and leak detection as required will also be part of your duties. In addition, you will need to maintain compressors, condensers, evaporators, and defrost systems to ensure optimal performance. Inspecting electrical connections, sensors, thermostats, and control boards associated with refrigeration equipment will also be a key aspect of your role. It is essential to document all work and maintain service logs for audits and compliance purposes. Ensuring compliance with safety regulations, refrigerant handling guidelines, and environmental standards will be crucial. Moreover, you should be able to work in Ammonia and Firon Plant environments. This is a full-time position that offers benefits such as Provident Fund. You should have a Diploma and a minimum of 2 years of experience in refrigeration. Shift availability includes both Day Shift and Night Shift, with a preference for both. The work location is in person at Chaundheri, Punjab. If you are willing to work in a 12-hour shift and meet the education and experience requirements, we encourage you to apply for this role.,

You will be responsible for the basic and detail design engineering of utility systems such as pumps, compressors, pressure vessels, HVAC, tanks, and storage systems. Your key tasks will include conducting basic and detailed engineering, developing design basis, process flow diagram, heat and material balance, equipment sizing & specification, process equipment datasheet, P&IDs, pipeline sizing, and HAZOP analysis. To excel in this role, you should have experience in conducting engineering for utility systems and be proficient in using process modelling software such as ASPEN, AFT Arrow, AFT Fathom, SP3D, as well as have a good understanding of International Codes and Standards. Additionally, exposure to the Chemical, Refinery, Petrochemical, or Electrolysis industry would be beneficial. The ideal candidate should possess a Bachelor's degree in Mechanical or Chemical Engineering (BE/B.Tech) with 3 to 7 years of relevant experience. A Master's degree (ME/M.Tech) in Mechanical or Chemical Engineering is preferred. If you are looking for a challenging opportunity to apply your engineering skills in the energy sector, this role of Process Design Engineer based in Kolkata could be the next step in your career.,

Develop and execute comprehensive sales strategies to drive significant revenue growth and market expansion for air compressors. Conduct detailed market analysis to identify new sales opportunities and adjust strategies accordingly.

Role & responsibilities 1. To achieve assigned DG sets sales targets in units & value in the assigned areas. 2. To create awareness about GCL DG sets in assigned areas across all business segments. 3. To ensure good presales, during sales & post sales response to keep customers delighted with GCL services. 4. Regional sales experience preferably in DG sets industry in relevant region will be essential -- Regards, Pranita Tangade Skillventory Ahmedabad | Bangalore | Delhi | Indore | Mumbai | Pune

HCLTech is #hiring for #MechanicalAuxiliaries at #Bangalore location. Experience in #3Dmodels #auxiliary #OilandGas #turbomachinary #piping #lubeoil #UGNX Job Details: Work Location: Bangalore Experience: - 5-20 years Position: Mechanical Auxiliaries (Lead, Technical Lead, Sr. Technical Lead, Tech Manager) Job Description: - Reviewing customer specifications and project requirements for designing Mechanical Auxiliaries. - Collaborating with external engineering suppliers for creating and reviewing engineering drawings and 3D models. - Conducting structural analysis using FEA tools like Ansys for baseplates, foundation loads, and more. - Developing piping line specifications, material selection, and valves selection. - Designing lube oil systems and components. - Creating skid packaging with a focus on ergonomics and maintenance. - Designing external BOP skids in collaboration with OEM vendors. - Overseeing project closure to ensure zero punch list and resolving non-conformities. - Supporting vendor technical alignment and achieving cost productivity. Interested candidates kindly share your updated resume to Kalaivani T ( Kalaivani.t@hcltech.com ) / Hemalatha (hemalatha_a@hcltech.com) with below details: Years of Exp: Current Company - Current CTC- Expected CTC- Notice Period- Current Location - Preferable Location- Link to vist: https://www.linkedin.com/posts/kalaivani-t-3173291a0_hiring-mechanicalauxiliaries-bangalore-activity-7355625483830521856-Lt7o?utm_source=share&utm_medium=member_desktop&rcm=ACoAAC8IxIMBCK7h27k43DuVGT8dtqgkRgJzT6o

As the Engineering Head at a renowned Container Glass Manufacturing Factory in Mumbai, your role will be crucial in ensuring the smooth operation of the plant's engineering and maintenance activities. With over 15 years of experience, preferably in glass manufacturing, and a qualification of B.E./Diploma in Mechanical/Electrical, you will be responsible for overseeing various key aspects of the plant's operations. Your primary responsibilities will include managing maintenance activities to ensure the uninterrupted functioning of furnaces, IS machines, lehrs, and utility systems. You will also lead project execution, including installations, upgrades, and CapEx projects, while effectively managing timelines and budgets. In addition, you will be tasked with overseeing utility and energy systems, focusing on energy efficiency and cost control. Your expertise in predictive maintenance will play a crucial role in improving machine uptime and reliability. Furthermore, you will be responsible for leading and mentoring engineering and maintenance teams, building their technical capabilities. Ensuring safety compliance and adherence to environmental norms will be a key aspect of your role, along with managing spare parts inventory and procurement coordination. Collaborating closely with production and quality departments, you will provide cross-functional support to enhance overall plant performance. To excel in this role, you must possess strong knowledge of industrial equipment, especially IS machines, furnaces, compressors, blowers, and DG sets. Hands-on experience with automation and PLC/SCADA systems, as well as proficiency in project management and budgeting, will be essential. A leadership mindset, coupled with problem-solving skills, will enable you to effectively navigate the challenges of the role. If you believe that your profile and skill set align with the requirements of this position, we encourage you to apply for further discussions regarding this exciting opportunity.,

Job Description: As an Electrical & Instrumentation Engineer at CRA, you will be responsible for preparing data sheets and selecting various instruments such as PT, TT, DPT, pH meter, Density meter, Thermocouple/RTD, Flow meter, Level Indicator, Pressure Gauge, etc. You will also be involved in selecting PLCs, logic configuration, and programming for systems related to piping & valves, pressure vessels, pumps, blowers, compressors, heat exchangers, etc. Additionally, your role will include preparing SLD, P&ID, Load List, Instrument-Index, I/O List, Instrument hook-up diagram, etc. You will be tasked with testing HV/LV (MCC) Panels and commissioning field instruments and PLC systems. Exposure to the oil & gas sector is mandatory for this position. Requirements: - Minimum 2 years of experience as an E & I Engineer - Bachelors B-Tech or Diploma in Electrical and Instrumentation - Proficiency in MS Excel and AutoCAD - Ability to take ownership and accountability for producing tangible results - Flexibility and experience in working with cross-functions and handling teams About Us: CRA is an engineering company involved in projects in the Defence, Aerospace, Oil and Gas, and Biogas sector. Our focus on design and manufacturing excellence ensures unparalleled quality, innovation, and customer satisfaction. Benefits: - Medical Insurance - Competitive Salary,

RFQ, TBE, vendor doc review Design of vessels, exchangers, tanks Tools: PV-Elite, B-JAC, HTRI Codes: ASME Sec.VIII, TEMA, API, IBR Review pumps, compressors, turbines Coordination with piping/procurement Review datasheets & inspection docs

Roles and Responsibility Operate and maintain turbine equipment for optimal performance. Monitor and control turbine speed, pitch, and other parameters. Perform routine maintenance tasks on turbine components. Collaborate with other teams to ensure smooth operation. Troubleshoot issues with turbine equipment. Implement safety procedures to prevent accidents. Job Requirements Minimum 1-8 years of experience as a Turbine Operator or related field. Strong knowledge of turbine operations and maintenance. Ability to work independently and as part of a team. Excellent problem-solving and communication skills. Familiarity with industry standards and regulations. Ability to adapt to changing situations and priorities.

Company Profile: Headquartered in Arvada, Colorado (USA) with operations and presence in Europe, the Middle East, India, Asia, Japan, and China, Sundyne is a global manufacturer of precision-engineered, highly reliable, safe and efficient centrifugal pumps and compressors for use in chemical, petrochemical, hydrocarbon, hydrogen, pharmaceutical, power generation and industrial applications. Sundyne is a leader in delivering precision-engineered and highly reliable pumps & compressors to many of the worlds most important markets, including energy, chemical, industrial, carbon capture, clean hydrogen, and renewable fuels. Sundyne pumps and compressors are available in API, ANSI/ASME, ISO and other industry compliant designs. To learn more about the Sundyne family of precision-engineered pumps and compressors, please visit www.sundyne.com. Position Summary: We are seeking a proactive and detail-oriented Graduate Engineer Trainee (E&I) to join our Electrical and Instrumentation team. The GET will support the design, integration, testing, and commissioning of electrical systems and instrumentation solutions for industrial pumps and compressors. This is an excellent opportunity for fresh graduates to build a strong foundation in E&I engineering within a leading manufacturing/Engineering setup. Key Responsibilities: Assist in the design, selection, and integration of electrical and instrumentation components for pump and compressor systems. Support the preparation of wiring diagrams, control panel layouts, cable schedules, and loop diagrams. Participate in PLC/SCADA programming, configuration of instrumentation, and system testing. Help in preparing technical documents including data sheets, Input / output lists, functional design specifications, and test reports. Coordinate with cross-functional teams including Mechanical, Production, Quality, and Project Engineering. Participate in panel inspection, FAT (Factory Acceptance Testing), and site commissioning support. Ensure compliance with relevant electrical codes, safety standards, and customer specifications. Assist in troubleshooting, root cause analysis, and corrective actions for E&I issues in products or systems. Technical/Functional Skills: Internship or project experience in industrial automation or process instrumentation. Basic understanding of electrical systems, instrumentation devices, and industrial automation. Familiarity with control systems, sensors, actuators, VFDs, and motor starters. Knowledge of electrical CAD software (e.g., AutoCAD Electrical, EPLAN) is preferred. Understanding of PLCs, HMI, SCADA, and industrial communication protocols is an added advantage. Qualifications & Experience: B.E. / B. Tech in Electrical Engineering, Electronics & Instrumentation Strong academic background with a good understanding of electrical & Instrumentation engineering principles. Proficient in MS Office tools (Excel, Word, PowerPoint). Good analytical and communication skills; willingness to learn and work in a team environment.

Role & responsibilities : Drive sales of boilers, heaters, and combustion systems in the assigned territory (Hyderabad, Vizag, and surrounding industrial belts). Build and maintain strong relationships with industrial customers , consultants, OEMs, and EPC contractors. Working with Steam engineering products where incumbent with the background of Steam Engineering Product/Boilers/Heaters is suitable. Achieve ABP targets for the respective territory directly and through the dealer network. Ensure Market coverage across geographies & industrial segments to analyze key market trends. Monitor lead generation to ensure sufficient enquiry pipeline for achieving sales target. Understanding the customer needs & identifying opportunities at existing plants for upgrades & improvements. Concept selling & drive new product /application sales. Develop and generate business through identified OEMs / Key Accounts / Channel Associates/ Consultants to get additional business. Track market trends, competitor activities, and project developments within the territory. Coordinate with service, project execution, and aftermarket teams for customer satisfaction and repeat business. Achieve territory sales targets and contribute to overall regional performance. Preferred candidate profile

Designation : AC Technician Qualification : Dip / B.E Experience : 3 to 6 Years Salary : 1500 to 2000 AED ( 35,000 to 45,000 INR) + OT Free Accommodation and Transport Direct Employment visa Contact: HR - Priya - 7845580688. Required Candidate profile Required Documents 1. Resume 2. Qualification Certificate 3. Experience Certificate 4. Original Passport 5. Photo Contact & share your resume through Whatsapp - Priya - 7845580688. Perks and benefits Free Accommodation and Transport

Role & responsibilities Knowledge in injection moulding machine breakdown attending Troubleshooting knowledge in key bitting machine is added advantage Troubleshooting knowledge in SPM machines Responsible for Utility units-Transformer, Capacitor Bank, Generator set, compressor overall system servicing on time. Down time recording & doing trend Analysis for MTBF, MTTR. Knowledge in IATF,EHS, OHSAS and other Customer Audits Driving continuous improvement of the machines by providing safety interlocks and poka-yoke on machines. PM scheduling & effective execution, MIS preparation for the same Preparing daily MIS and quantifiers to keep a track of MTTR, MTBF, and total downtime. To drive Low Cost Automation Projects. 5S Standard Implementation. System Implementation i.e. Kaizen, Poka-Yoke, 5S etc . To reduce the Repair & Maintenance cost, and tracking the cost as per the maintenance budget. Responsible for energy cost Preferred candidate profile Should have minimum 10+ Years Experience Candidate from Automotive Manufacturing Industry would be Preferred Candidate should have B.E Electrical background Candidate should have rich experience on PED and Maintenance Should have experience on Troubleshooting and Injection Moulding

Must to have exp. electrical substations operation, DG operation and maintenance including switchgears, safety relays, AC drives, starters, and motors used in various applications such as compressors, blowers, cooling towers, and conveyors.

maintenance of Rotary Dryer/Kiln, Roller Mill, Boiler, Compressor, Conveyors, Pumping & Piping systems, ETP, and related equipment in the chemical, mineral, or manufacturing industry.

Hiring: Operator / Maintenance Oran, Sabarkantha & Nashik ITI/Diploma (Mech/Elec/Instr) 1+ yr in O&G maintenance/troubleshooting Third-party Payroll – Authentic Staffing Jagruti: 91575 49257 career@authentic-staffing.com

Maintenance of plastic injection molding machines and auxiliary equipment. Resolve mechanical, hydraulic, pneumatic, electrical issues in machines. Maintain compressors, chillers, cooling towers, DG sets. Support mold changeover. Spares Control Required Candidate profile Engineer with knowledge of injection molding machine maintenance, preferably brands Ferromatic, Haitian, Toshiba, Engel. Experience in mechanical, hydraulic, pneumatic systems. Electrical/PLC systems

As a Rotating Equipment Engineer at Tecnimont, you will be responsible for providing technical expertise and support for the design, installation, and maintenance of rotating equipment in the oil and gas industry. Your role will involve working closely with project teams, clients, and vendors to ensure that rotating equipment meets all performance, reliability, and safety standards. Additionally, you will be expected to participate in troubleshooting and resolving any issues related to rotating equipment during the operational phase of projects. Your key responsibilities will include providing technical support for the design, selection, and specification of rotating equipment, encompassing pumps, turbines, compressors, and motors. You will be required to review and approve equipment datasheets, specifications, and procurement packages, as well as conduct technical evaluations of vendor bids and proposals. Furthermore, you will participate in factory acceptance tests and site inspections of rotating equipment, offering input and recommendations for equipment installation, commissioning, and start-up activities. Developing maintenance and inspection plans for rotating equipment to ensure optimal performance and reliability will also be part of your duties, along with investigating and resolving any issues related to rotating equipment performance or failures. Collaboration with other engineering disciplines and project teams to ensure the successful integration of rotating equipment into overall project designs is essential, as is staying up to date with industry standards, best practices, and technological advancements related to rotating equipment. To qualify for this position, you should hold a Bachelor's degree in Mechanical Engineering or a related field and have accumulated 8-15 years of experience in engineering and design of rotating equipment within the oil and gas industry. Strong technical knowledge of rotating equipment, including pumps, turbines, compressors, and motors, is required, along with familiarity with industry standards and codes related to rotating equipment design and installation. Effective problem-solving and analytical skills, excellent communication and teamwork abilities, and the capacity to work in a dynamic and fast-paced environment are all essential qualities for success in this role. If you are a motivated and experienced engineer with a passion for rotating equipment, we encourage you to apply for this exciting opportunity at Tecnimont. Join our team and contribute to our success in delivering innovative solutions to our clients in the oil and gas industry. Take the next step in your career by applying now!,

Sodexo Food Solutions India Pvt. Ltd. is looking for Operator - Hvac to join our dynamic team and embark on a rewarding career journey Installation: Install heating, ventilation, air conditioning, and refrigeration systems in new construction projects or existing buildings Follow blueprints, specifications, and local building codes to ensure proper installation and functionality Maintenance: Perform routine maintenance tasks, including cleaning, lubricating, and inspecting HVAC/R systems and components Replace filters, belts, motors, and other worn or damaged parts as needed to ensure optimal performance and energy efficiency Repair: Diagnose and troubleshoot HVAC/R systems to identify malfunctions, leaks, or performance issues Repair or replace defective components, such as compressors, coils, thermostats, and valves, using hand tools, power tools, and specialized equipment System Optimization: Calibrate controls, adjust settings, and fine-tune HVAC/R systems to maximize efficiency, comfort, and performance Recommend upgrades or modifications to improve system reliability and energy efficiency Refrigerant Handling: Handle, recover, recycle, and recharge refrigerants in compliance with EPA regulations and industry best practices Ensure proper handling and disposal of refrigerants to prevent environmental contamination and comply with safety standards Customer Service: Interact with customers, building owners, and property managers to assess their HVAC/R needs, provide recommendations, and address concerns Communicate effectively and professionally to build positive relationships and ensure customer satisfaction Safety Compliance: Follow safety protocols, guidelines, and regulations to prevent accidents, injuries, and property damage during HVAC/R installation, maintenance, and repair activities Use personal protective equipment (PPE) and adhere to safety procedures at all times Documentation: Maintain accurate records of HVAC/R service calls, inspections, repairs, and maintenance activities Document equipment readings, test results, and recommendations for future reference and compliance purposes

Good sound in LT , PT , TT & RTD Weigh scales & Filling stations. Pneumatic ON/OFF valves & Control valves LT,PT calibration. Basic knowledge in troubleshooting PLC. Foundation field bus knowledge.

Will be responsible for managing the sales in the North India of the country Will Travelling throughout North India for sales enquiry. Maintaining relation with key clients Must score throughout 70 percent of marks. Perks and benefits 2 Lacs As Variable depending on Seles achievement.

Will be responsible for managing the sales in the North India of the country Will Travelling throughout North India for sales enquiry. Maintaining relation with key clients Must score throughout 70 percent of marks. Perks and benefits 2 Lacs As Variable depending on Seles achievement.

The role of Junior Electrical Engineer in the Manufacturing Sector is suitable for individuals who are enthusiastic about utilizing their electrical engineering expertise within an industrial environment. As a recent graduate or a professional with limited experience, you will play a pivotal role in ensuring the smooth operation of electrical systems and equipment within the manufacturing facility. Your responsibilities will include assisting in the installation, maintenance, and troubleshooting of various electrical systems and equipment such as generators, compressors, CCTV systems, and building facilities. Additionally, you will collaborate with senior engineers to enhance electrical circuits and control panels. Routine inspections, testing, and calibration of electrical components will be conducted by you to maintain efficiency and safety standards. In the event of electrical failures, you will be responsible for analyzing the issues and implementing solutions to minimize downtime while ensuring all work adheres to safety standards, regulations, and company policies. Your exposure to PLC programming, sensors, and industrial automation will be under the guidance of senior staff. Furthermore, you will contribute to energy efficiency projects aimed at enhancing sustainability and reducing operational costs. It is essential to maintain accurate documentation and reports related to electrical work, inspections, and repairs. To qualify for this role, you should possess a Bachelor's degree or diploma in Electrical Engineering or a related field. While 0-2 years of experience in an industrial or manufacturing environment is preferred, internships or apprenticeships are advantageous. Proficiency in electrical circuits, power distribution, and industrial control systems is essential, along with knowledge of motors and automation systems. An understanding of electrical safety standards and regulations is also required. Strong analytical skills, a willingness to learn, teamwork, and effective problem-solving abilities are valuable soft skills for this position. This is a full-time job opportunity that offers benefits such as health insurance, leave encashment, paid sick time, paid time off, and provident fund. The work schedule is during the day shift, and the preferred work experience is one year. The position requires in-person work at the designated location.,

About Company Job Description • Installation, Operation, maintenance, troubleshooting and commissioning of 66 / 33 KV GIS and above switchyard with all associated equipment’s i.e. CB, CT, PT, LA, Isolator, CVT, Protection relays, CRP Panel, RTCC panel,25MVA Transformer, SCADA, SAS and battery charger Panel with battery. • Testing, Commissioning, relay setting, troubleshooting of Protection relays, PLC and SCADA system. • Fault analysis of various electrical faults in electrical system. • Operation and maintenance of 33KV, 11 KV HT switchgear panel, Fast bust transfer system,11KV Motor, 33/11KV & 33/0.400 KV Transformers, NGR, PCC, MCC Panel, AMF Panel, Synchronization Panel, LT motors and VFD drives. • Operation, maintenance, commissioning and troubleshooting of DG and UPS system. • Operation, maintenance, commissioning and troubleshooting of Large utility System, i.e. Air compressors, HVAC, PEN, PUW, PEX, N2 generation plant and other associated equipment’s with Electrical system. • 7.Effective operation and maintenance for HT/LT Electrical System. • Spare and Inventory management for electrical System in SAP/ERP system. • Training to Sub ordinates. • IMS implementation with preparation of SOP, Work instruction, maintenance schedule, 5S etc. • 11.Preparation & Monitoring of Energy reports with cost saving analysis. • 12. Implement safety culture within department and organization. • 13.Hands on experience of Erection, testing commissioning and operation and maintenance of Power distribution & Utility electrical System including SCADA and SAS.

About Company Job Description Roles and Responsibilities: • Installation, Commissioning and Safe and trouble-free operation and maintenance of utility equipment -HT/LT Panels, Switchgears, Transformers, Pumps, Cooling towers, Gearbox, Compressors, Chillers, DI Plant, ETP, Exhaust, CDS (Chemical Dispensing System) etc. • Execute preventive maintenance and predictive maintenance of utility equipment. • Ensure that all standby equipment is always available for operation. • Troubleshoot the problems and make timely repairs. • Plan, execute and coordinate within the department. • Tools requirement, spare management and team management. • Shift schedule, corrective actions, special activities planning. • Maintain safety and adhere all recommendations