71 Circuit Design Jobs

Electronics Hardware Lead Bachelor’s or master’s degree in electrical engineering, Electronics Engineering, or related field. • Min 10 Yrs of expnc in electronics H/w design, preferably with a focus on inertial navigation or aerospace apps.

We are largest 2nd stand company in Electrical Contractor in Mumbai ,Maharastra We are looking for Candidate with Electrical Background and Experience We are currently looking for Position on Urgent Basis We are looking candidate only from Electrical Infra structure /Electrical Contranctor Background Billing Engineer Eletcricalsalary45000 to 1 lac Autocad Designer Electrical Salary35000 to 75000 Tender EngineerElectricalSalary45000 to 1 lac 50k Autocad EngineerSalary35000 to 75000 Electrical EngineerSalary 35000 to 1 lac Electrical SupervisorSalary 30000 to 60000 ElectricianSalary 20000 to 35000 Salary would be depend on the experience of the candidate

- We are looking for Electronics Hardware Engineers in the team. In this role, it is expected that the candidate should have hands-on experience in electronics hardware design and development of digital analogue and mixed domain functional and performance circuits solutions. As a core member of EE team you will create design with microprocessors/ microcontrollers and peripheral interface such as memory devices, GPIO, power supply electronics and embedded systems bring-up. Responsibilities : 1. Designing and development of new hardware functional system for multiple products. 2. Collaborate with with the embedded software development team for hardware/ firmware co-design and system performance requirement translating to design implementation ; optimization. 3. Ability to synthesize user and technical performance hardware requirements and develop appropriate solutions. 4. Electronic component and circuit analysis to design functional sub-system by simulation and physical implementation. Requirements & Skills : Must to have : 1. 2 years to 5 years of experience in low-power circuit design, system bring-up, engineering-build integration and debug. 2. 2 years to 4+ years of experience driving design development from component selection, schematic capture, PCB layout and routing, Component foot-print for the product Electronics BoM through assembly. 3. 3+ of experience in Multi-layer, mixed-signal board-level design in Altium/ Eagle. 4. Experience of power topology: DC-DC, Flyback Converters, LDOs, etc. 5. Experience of Battery charger design, fuel gauge, analogue sensor instrumentation; protection circuits. 6. Hand-on experience in hardware implementation of embedded system data communication protocols such as 1-wire, I2C, SPI, UART, USB. 7. Experience of BDC/BLDC or steppers motors, motor drive circuit design and its working principles. 8. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. - Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCB assembly level. 9. Ability to design and implement smart sensors, sensors instrumentation like current, voltage signal conditioning, Time-of-Flight, Proximity, Position, ALS, etc on a PCB assembly level. 10. Knowledge about Design calculations/Documentation during Product Development Life Cycle milestones. 11.Knowledge of EMI- EMC and ESD standards and practices is a plus Good to have : 1. Strong communication and documentation skills and ability to operate independently. 2. Experience with portable, battery operated designs and power budgeting. 3. Knowledge about Wi-fi, Bluetooth, BLE, RF Antenna design Technologies is a plus. 4. Experience of Microphone and Speaker circuit design is a plus 5. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. 6. Hand-on experience of manufacturing process including DFM and DFT for consumer products at scale. 7. Familiar with MIPI Camera CSI and DSI interface implementation ; display Modules and their communication protocols; Audio signal processing interface.

Role Purpose The purpose of this role is to perform the development of VLSI system by defining the various functionalities, architecture, layout and implementation for a client Do 1. Conduct verification of the module/ IP functionality and provide customer support a. Understand the architecture of the module or the IP and create verification environment and the development plan as per Universal Verification Methodology b. Create test bench development and test case coding of the one or multiple module c. Write the codes or check the code as required d. Execute the test cases and debug the test cases if required e. Conduct functional coverage analysis and document the test cases including failures and debugging procedures on SharePoint/ JIRA or any other platform as directed f. Test the entire IP functionality under regression testing and complete the documentation to publish to client g. Troubleshoot, debug and upgrade existing systems on time & with minimum latency and maximum efficiency h. Write scripts for the IP i. Comply with project plans and industry standards 2. Ensure reporting & documentation for the client a. Ensure weekly, monthly status reports for the clients as per requirements b. Maintain documents and create a repository of all design changes, recommendations etc c. Maintain time-sheets for the clients d. Providing written knowledge transfer/ history of the project Deliver No. Performance Parameter Measure 1. Verification Timeliness Quality of Code/ Number of defects Customer responsiveness Project documentation (scripts, test cases etc) 2. Self-development Skill test for next level clearance on Trend Nxt Mandatory Skills: Analog Circuit design.Experience3-5 Years.

Dear Sir, We are hiring for the below role if interested please send me your update resume to [HIDDEN TEXT] Application and Planning Engineer Job Description We are looking for an experienced Technical Leader to join our Application Engineering team.The Technical Engineer will be responsible for various firmware application engineering activities related to solution design, selection of controllers, programming / configuration of PLC controllers, DDC controllers, Protocol converters, etc., providing pre-sale technical support, participating in site surveys, providing inputs to software development team, verifying the developed software and participating in commissioning processes. You will gain valuable experience in the fields of Building Automation Systems, electrical, electronics, and mechanical control systems. Key Responsibilities: Support the pre-sale technical support activities, including generating IO summaries and controller selection for BMS and CPM/CPO projects. Prepare technical submittals for client proposals, including system designs, and MEP drawings. Conduct site surveys to assess existing systems, understand customer requirements, and gather necessary data for designing control systems. Programming and configuring Direct Digital Controllers (DDC) , Programmable Logic Controllers (PLC) and Protocol Converters for automation systems and provide an interface to applications over standard protocols like BACnet/IP. Collaborate with cross-functional teams to integrate control systems into larger automation solutions. Provide support for commissioning of DDC/PLC or Protocol converter systems, including system testing, troubleshooting, and ensuring the system meets design specifications. Support installation teams on-site and assist with troubleshooting, configuration, and system optimization during commissioning. Hands-on experience with industry-standard tools, controllers, and software used in building automation Requirements Required Qualifications: Educational Background: M.E / M.Tech / B.E. / B.Tech in Electronics and Communication, Electrical and Electronics Engineering (EEE) Required Skills: Hands-on experience with Electronics, Electrical systems, Circuit design (analog and digital) Experience with handling popular DDCs , PLCs, Protocol converters , control systems, networking, protocols like BACnet, Modbus, etc Desired: Knowledge of HVAC systems and Building Automation Systems I/O summary creation and controller selection for BMS applications. Prepare technical submittals to clients. Experience and willingness to assist in site surveys to understand customer needs and current system configurations. Exposure to commissioning activities, including testing and troubleshooting DDC/PLC systems. Experience with electrical drawings , control panel layouts , and system designs Good communication skills

RELEVANT EXPERIENCE Having 3-7+ years of experience in Automotive ECU development Hands on experience in HW Circuit design and development (Automotive ECU) Schematic, Design justification, circuit simulation, worst case analysis, Derating, thermal analysis and component selection. Design Failure mode effect analysis (DFMEA), FTA Strong Technical Knowledge in small signal electronics (analog and digital) (Opamp, MOSFET, BJT) knowledge on automotive electronics technology, test standards and processes Hands-on with Automotive ECU components selection and validation, Power supply topologies - Linear, LDOs, DC-DC switching power supplies (Buck, Boost, Buck-Boost) Micro controllers and Digital circuit boards with communication protocols I2C, SPI, LIN, CAN Memory Interfaces: EEPROM, Flash and DDR memories EMI/EMC design guidelines and knowledge on Environmental Reliability test. Hands-on with complete Automotive ECU validation/development preferred. Knowledge on components obsolescence/shortage analysis Tools: Orcad cadence, Pspice simulation, LTspice, PCB design entry. PERSONAL CHARACTERISTICS & BEHAVIOURS Strong communication, organization and interpersonal skills Negotiation skills Ability to work with deadlines & without supervision. Analytical and problem-solving skills and logical thinking Ability to foresee technical problems that may derail the project schedule. Adaptability and learning skills.

Requirements- Qualification: BTech/MTech Skills/Experience: MTech+3years / BTech+5years Knowledge of CMOS processes and issues in deep submicron process technologies. CMOS circuit design and layout methodology & flow; basic understanding of analog/mixed signal circuitry, familiarity with basic ESD concepts is an advantage. Familiarity with ASIC design flow. Knowledge of JEDEC requirements for DDR interfaces & standards, DDR Timing, ODT and SDRAM functionality would be a plus. Ability to execute assigned circuit design tasks with best product quality and efficiency. Good written and verbal communication skills in interactions with internal development teams.

About the job: Key responsibilities: 1. Design, develop, and test embedded systems like flight controllers, electronic speed controllers, and wireless video systems 2. Develop firmware for ARM-based microcontrollers and other SoC platforms 3. Implement real-time operating systems (RTOS) and embedded Linux where necessary 4. Design hardware and required firmware using SOC 5. Design and implement communication protocols for wireless video transmission and reception 6. Conduct thorough testing and debugging of embedded systems to ensure high reliability and performance 7. Optimize firmware for power efficiency and performance 8. Develop and maintain documentation for design, development, testing, and user manuals 9. Stay updated with the latest developments in embedded systems and incorporate new technologies where appropriate 10. Work closely with cross-functional teams to ensure seamless integration of embedded systems with other components of the product Requirements: 1. Experience of hardware design principles and experience with schematic and PCB design tools (e.g., Altium Designer, Eagle, KiCad) 2. Strong grasp on electronics circuit and design principal 2. Proficiency in programming languages such as C, C++, or Python 3. Experience with ARM microcontrollers (e.g., Cortex-M, Cortex-A) and SoC platforms 4. Strong knowledge of embedded firmware development, including real-time systems and embedded Linux 5. Experience with communication protocols such as I2C, SPI, UART, CAN, and wireless protocols (e.g., Wi-Fi, Bluetooth, LoRa) Tools and software you should know how to work with: 1. IDEs: Keil, IAR Embedded Workbench, Eclipse, VS Code 2. Version Control: Git, GitHub, Bitbucket 3. PCB Design: Altium Designer, Eagle, KiCad 4. Debugging: JTAG, SWD, oscilloscopes, logic analyzers, multimeters 5. Simulation: MATLAB/Simulink 6. Scripting: Python 2 year of experience in hardware designing is mandatory (excluding internship). Who can apply: Only those candidates can apply who: have minimum 1 years of experience are Electronics Engineering students Salary: ₹ 4,00,000 - 6,00,000 /year Experience: 1 year(s) Deadline: 2025-06-28 23:59:59 Other perks: Informal dress code, Free snacks & beverages Skills required: ARM Microcontroller, Raspberry Pi, Embedded Systems, Circuit Design, C Programming, PCB Design, C++ Programming, EAGLE, SOC and PCB Soldering Other Requirements: 1. Experience with drone flight controllers and electronic speed controllers 2. Knowledge of signal processing and control theory 3. Experience with FPGAs and VHDL/Verilog 4. Familiarity with agile development methodologies About Company: EDITH Defence Systems (EDS) is a modern-day defence company that uses advancements in artificial intelligence, computer vision, machine learning, and sensor fusion to develop world-class defence products.

Position - Electronics AM/ DM / Manager Location - Rajpura Exp - 5 - 13 yrs Edu -B.Tech/Diploma/M.Tech Instrument Knowledge - CRO, Power Analyser,LCR Meter,HV & TR Test Equipment,EMI Equipment. Industry preferrence - Power Electronics Company - HVAC

About the job: Key responsibilities: 1. Low-power PCB design - Optimize power consumption for extended battery life. 2. Battery management & efficiency - Design circuits for efficient power regulation, charging, and battery protection. 3. Wireless communication integration - Incorporate LoRa, NB-IoT, BLE, Wi-Fi, or other wireless modules while ensuring signal integrity. 4. RF layout optimization - Minimize interference and ensure proper antenna placement for reliable connectivity. 5. Power supply & voltage regulation - Implement efficient DC-DC converters and low-power voltage regulators. 6. Thermal management - Optimize heat dissipation for battery-operated devices to prevent overheating. 7. Compact & energy-efficient design - Ensure minimal PCB footprint while maintaining performance. 8. EMI/EMC compliance - Design for regulatory compliance and noise reduction in wireless environments. 9. Prototyping & testing - Validate battery life, power consumption, and RF performance through iterative testing. 10. Collaboration with firmware & mechanical teams - Work closely with embedded developers and enclosure designers for seamless integration. Who can apply: Only those candidates can apply who: have minimum 1 years of experience are Electronics Engineering students Salary: ₹ 2,60,000 - 3,00,000 /year Experience: 1 year(s) Deadline: 2025-06-27 23:59:59 Skills required: Embedded Systems, Circuit Design, PCB Design, Internet of Things (IoT), PCB Soldering and Battery Management Systems Other Requirements: 1. Experience in the development of IoT-based devices. 2. Experience in battery-based devices. About Company: A luxury brand dedicated to merging sustainable living with effortless style. Our mission is to redefine fashion by blending timeless designs with eco-conscious practices. At Vivir, we offer an array of collections that go beyond just fashion; they represent a lifestyle of sustainable luxury, with pieces that include elegant linen, versatile formal wear, striking capes, festive attire, and an eclectic mix of different clothing styles and silhouettes.

Job Title : Embedded Hardware Engineer - Schematic/Layout Job Summary : An Embedded Hardware Engineer is responsible for designing, developing, and testing electronic circuits and printed circuit boards (PCBs). This role involves creating schematics, performing circuit simulations, and ensuring the final product meets design specifications and quality standards. Key Responsibilities : Designing Electronic Circuits : Create detailed schematics for various electronic components and systems. PCB Layout : Use CAD software to design the physical layout of PCBs, ensuring optimal placement of components. Component Selection : Choose appropriate electronic components that meet design requirements and ensure compatibility. Circuit Simulation and Analysis : Perform simulations to test and analyze circuit designs before physical implementation. Prototyping and Testing : Build prototypes and conduct tests to verify that the design meets specifications. Documentation : Maintain detailed documentation of designs, schematics, and test results. Collaboration : Work closely with other engineers, including software engineers, to ensure seamless integration of hardware and software. Skills and Qualifications : Technical Skills : Proficiency in CAD software (e.g., Orcad, Altium, Cadence), knowledge of electronic communication protocols (e.g., Wi-Fi, CAN, Bluetooth), and experience with circuit simulation tools. Educational Background : Typically a Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field. Experience : Hands-on experience with PCB design, component selection, and circuit analysis. Attention to Detail : Strong attention to detail to ensure accuracy in designs and documentation. Problem-Solving : Ability to troubleshoot and resolve design issues effectively. In Short : 1. HW PCB tool knowledge - Orcad & Expedition 2. Hands on HW design experience - Schematic and Layout 3. SOC & High-speed peripherals understanding

Senior Electronics Hardware Engineer - We are looking for a Senior Electronics Hardware Engineer in the team. In this role, candidate is expected to have a hands-on experience in hardware design and development of digital and analogue electronics; analogue and mixed domain circuits solutions. As a core member of Electronics system design team you will drive microprocessors/ microcontrollers, SoC based processing unit design and peripheral interface control, power electronics for power supply, power distribution and battery charging management and embedded systems bring-up, integration and qualification. Core Responsibilities : 1. Design and develop new hardware platform for multiple projects. 2. Partner with the embedded software team for hardware/ firmware co-design and development; optimization. 3. Ability to make sense of complex functional requirements and buld-up appropriate electronics hardware based solutions. 4. Create a reliable and modular design and qualify the integrated design with respect to the performance requirements. Requirements & Skills : Must to have : 1. 6 year to 10 years of experience in low-power circuit design, system bring-up, engineering-build integration and debug the performance issues in the integrated product. 2. 4 year to 8 years of experience driving design development from component selection, schematic capture, PCB layout, assembly and integration with other modules of product. 3. 5+ of experience in development of Multi-layer, mixed-signal board-level design in Altium/ Eagle. 4. Experience of power supply topologies: DC-DC, Flyback Converters, LDOs, etc. 5. Experience of Battery charger design, signal conditioning, sensor interface; protection circuits. 6. Hand-on experience in hardware implementation of embedded system data communication protocols such as 1-wire, I2C, SPI, UART, USB, TCP/ IP, wireless, BLE 7. Experience of BDC/ BLDC or steppers motors, motor driver circuit design and its working principles. 8. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. - Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCBA level. 9. Ability to Interface sensors like current-voltage, Time-of-Flight, Proximity, Position, ALS, etc on a PCBA level. 10. Knowledge about Design calculations/ Worst-case performance analysis, Design Documentation during Product Development Life-Cycle milestones. 11. Knowledge of EMI/ EMC/ ESD standards and practices is preferred. Good to have : 1. Strong communication and documentation skills and ability to operate independently. 2. Experience with portable, battery operated designs and power budgeting. 3. Knowledge about Wi-fi/ Bluetooth/ RF/ Antenna Technologies . 4. Experience of Microphone and Speaker circuit design is a plus 5. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. 6. Hand-on experience of manufacturing process including DFM and DFT for consumer products at scale. 7. Familiar with MIPI Camera CSI and DSI ; display Modules and their communication protocols applications; Audio signal Processing interface.

Electronics Hardware Engineer - We are looking for Electronics Hardware Engineers in the team. In this role, it is expected that the candidate should have hands-on experience in electronics hardware design and development of digital analogue and mixed domain functional and performance circuits solutions. As a core member of EE team you will create design with microprocessors/ microcontrollers and peripheral interface such as memory devices, GPIO, power supply electronics and embedded systems bring-up. Responsibilities : 1. Designing and development of new hardware functional system for multiple products. 2. Collaborate with with the embedded software development team for hardware/ firmware co-design and system performance requirement translating to design implementation ; optimization. 3. Ability to synthesize user and technical performance hardware requirements and develop appropriate solutions. 4. Electronic component and circuit analysis to design functional sub-system by simulation and physical implementation. Requirements & Skills : Must to have : 1. 2 years to 5 years of experience in low-power circuit design, system bring-up, engineering-build integration and debug. 2. 2 years to 4+ years of experience driving design development from component selection, schematic capture, PCB layout and routing, Component foot-print for the product Electronics BoM through assembly. 3. 3+ of experience in Multi-layer, mixed-signal board-level design in Altium/ Eagle. 4. Experience of power topology: DC-DC, Flyback Converters, LDOs, etc. 5. Experience of Battery charger design, fuel gauge, analogue sensor instrumentation; protection circuits. 6. Hand-on experience in hardware implementation of embedded system data communication protocols such as 1-wire, I2C, SPI, UART, USB. 7. Experience of BDC/BLDC or steppers motors, motor drive circuit design and its working principles. 8. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. - Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCB assembly level. 9. Ability to design and implement smart sensors, sensors instrumentation like current, voltage signal conditioning, Time-of-Flight, Proximity, Position, ALS, etc on a PCB assembly level. 10. Knowledge about Design calculations/Documentation during Product Development Life Cycle milestones. 11.Knowledge of EMI- EMC and ESD standards and practices is a plus Good to have : 1. Strong communication and documentation skills and ability to operate independently. 2. Experience with portable, battery operated designs and power budgeting. 3. Knowledge about Wi-fi, Bluetooth, BLE, RF Antenna design Technologies is a plus. 4. Experience of Microphone and Speaker circuit design is a plus 5. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. 6. Hand-on experience of manufacturing process including DFM and DFT for consumer products at scale. 7. Familiar with MIPI Camera CSI and DSI interface implementation ; display Modules and their communication protocols; Audio signal processing interface.

Description We are seeking a skilled and motivated Electrical Project Engineer to oversee and coordinate the electrical aspects of engineering projects from conception through completion. The ideal candidate will have a strong background in electrical engineering principles, project management, and compliance with safety and industry standards. You will work closely with multidisciplinary teams to ensure project specifications, budgets, and timelines are met. RAMYA HR - 9962245815 Responsibilities Design and develop electrical systems and components for projects. Collaborate with project managers and other engineers to ensure project specifications are met. Conduct site visits to evaluate electrical installations and ensure compliance with safety standards. Prepare technical documentation including specifications, reports, and drawings. Assist in troubleshooting electrical issues and provide solutions during project execution. Participate in project planning and scheduling to meet deadlines. Skills and Qualifications Strong understanding of electrical design principles and practices. Proficiency in electrical design software such as AutoCAD, ETAP, or similar tools. Knowledge of electrical codes and standards in India (IS, IEC standards). Basic understanding of project management principles. Excellent analytical and problem-solving skills. Strong communication and teamwork abilities.

For More Information Call / WhatsApp to Ms.Neha-9870170629 Responsibilities Design, develop, and test electrical systems and components for various applications. Collaborate with cross-functional teams to ensure project requirements are met. Conduct feasibility studies and write technical reports on electrical engineering projects. Troubleshoot and resolve electrical issues in existing systems and equipment. Ensure compliance with safety standards and regulations in all engineering practices. Prepare project documentation and present findings to stakeholders. Exciting Job Opportunities Abroad Apply Now!??????????????????????????????????????????????????????? ???? Note: This position is strictly for overseas locations. Not for jobs in India. We are currently hiring for multiple roles in top global destinations: ? Canada ? Australia ? Germany ? Singapore ? Luxembourg ? New Zealand ? USA ???? Important Eligibility Criteria: Must be an Indian passport holder Open to relocation abroad (This job is not based in India ) Only serious candidates willing to work overseas should apply Freshers and experienced professionals are both welcome (role-specific) ???? Why Apply International exposure and career growth High-quality work environments Attractive compensation packages ???? Please Do NOT Apply If: You are looking for a job in India You are not willing to relocate to another country

We are looking for a Senior Electronics Hardware Engineer in the team. In this role, candidate is expected to have a hands-on experience in hardware design and development of digital and analogue electronics; analogue and mixed domain circuits solutions. As a core member of Electronics system design team you will drive microprocessors/ microcontrollers, SoC based processing unit design and peripheral interface control, power electronics for power supply, power distribution and battery charging management and embedded systems bring-up, integration and qualification. Core Responsibilities: 1. Design and develop new hardware platform for multiple projects. 2. Partner with the embedded software team for hardware/ firmware co-design and development; optimization. 3. Ability to make sense of complex functional requirements and buld-up appropriate electronics hardware based solutions. 4. Create a reliable and modular design and qualify the integrated design with respect to the performance requirements. Requirements & Skills: Must to have: 1. 2+ years of experience in low-power circuit design, system bring-up, engineering-build integration and debug the performance issues in the integrated product. 2. 2+ years of experience driving design development from component selection, schematic capture, PCB layout, assembly and integration with other modules of product. 3. 2+ years of experience in development of Multi-layer, mixed-signal board-level design in Altium/ Eagle. 4. Experience in embedded Linux based SOCs design along with microcontrollers. 5. Experience of power supply topologies: DC-DC, Flyback Converters, LDOs, etc. 6. Experience of Battery charger design, signal conditioning, sensor interface; protection circuits. 7. Hand-on experience in hardware implementation of embedded system data. communication protocols such as 1-wire, I2C, SPI, UART, USB, TCP/ IP, wireless, BLE 8. Experience of BDC/ BLDC or steppers motors, motor driver circuit design and its working principles. 9. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCBA level. 10. Ability to Interface sensors like current-voltage, Time-of-Flight, Proximity, Position, ALS, etc on a PCBA level. 10. Knowledge about Design calculations/ Worst-case performance analysis, Design Documentation during Product Development Life-Cycle milestones. 11.Knowledge of EMI/ EMC/ ESD standards and practices is preferred. Good to have: 1. Strong communication and documentation skills and ability to operate independently. 2. Experience with portable, battery operated designs and power budgeting. 3. Knowledge about Wi-fi/ Bluetooth/ RF/ Antenna Technologies . 4. Experience with RTOS 5. Experience with ESP32 and ESP-IDF 6 Experience of Microphone and Speaker circuit design is a plus 7. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. 8. Hand-on experience of manufacturing process including DFM and DFT for consumer products at scale. 9. Familiar with sensor interface, MIPI Camera CSI and DSI ; display Modules and their communication protocols applications; Power Supply design and distribution for low power applications, motor drive control design, Pwm, DMA control and Audio signal Processing interface.

Key Responsibilities Develop systems for guidance, navigation, and control (GNC). Design and integrate embedded systems with sensors and controllers. Integrate and characterize sensors including EO, LiDAR, sonar, and radar. Implement algorithms for path planning and vehicle coordination. Apply control strategies such as PID and MPC. Enhance tracking, collision avoidance, and classification systems. Conduct lab/field tests and SITL simulations. Prepare technical documentation and support hardware integration. Candidate Profile Qualifications: Bachelor's or Master's in Electronics, Mechatronics, Automation, or related engineering disciplines/equivalent professional experience. Skills & Experience Proficiency in C/C++ for embedded systems. Experience with STM32 or equivalent platforms. Circuit design, assembly, and debugging. Hands-on with electromechanical integration and test tools. Familiarity with platforms like Pixhawk, PX4, Ardupilot. Working knowledge of MATLAB, Python, ROS/ROS2. Strong design, integration, and testing skills. Good command of productivity tools like MS Office. Personal Attributes Excellent communication and interpersonal skills. Analytical problem-solving ability. Leadership and project management competence. Commitment to continuous learning and quality delivery.

Core Responsibilities: 1. Design and develop new hardware platform for multiple projects. 2. Partner with the embedded software team for hardware/ firmware co-design and development; optimization. 3. Ability to make sense of complex functional requirements and buld-up appropriate electronics hardware based solutions. 4. Create a reliable and modular design and qualify the integrated design with respect to the performance requirements. Requirements & Skills: Must to have: 1. 6 year to 8 years of experience in low-power circuit design, system bring-up, engineering-build integration and debug the performance issues in the integrated product. 2. 4 year to 8 years of experience driving design development from component selection, schematic capture, PCB layout, assembly and integration with other modules of product. 3. 5+ of experience in development of Multi-layer, mixed-signal board-level design in Altium/ Eagle. 4. Experience in embedded Linux based SOCs design along with microcontrollers. 4. Experience of power supply topologies: DC-DC, Flyback Converters, LDOs, etc. 5. Experience of Battery charger design, signal conditioning, sensor interface; protection circuits. 6. Hand-on experience in hardware implementation of embedded system data. communication protocols such as 1-wire, I2C, SPI, UART, USB, TCP/ IP, wireless, BLE 7. Experience of BDC/ BLDC or steppers motors, motor driver circuit design and its working principles. 8. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCBA level. 9. Ability to Interface sensors like current-voltage, Time-of-Flight, Proximity, Position, ALS, etc on a PCBA level. 10. Knowledge about Design calculations/ Worst-case performance analysis, Design Documentation during Product Development Life-Cycle milestones. 11.Knowledge of EMI/ EMC/ ESD standards and practices is preferred. Good to have: 1. Strong communication and documentation skills and ability to operate independently. 2. Experience with portable, battery operated designs and power budgeting. 3. Knowledge about Wi-fi/ Bluetooth/ RF/ Antenna Technologies . 4. Experience with RTOS 5. Experience with ESP32 and ESP-IDF 6 Experience of Microphone and Speaker circuit design is a plus 7. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. 8. Hand-on experience of manufacturing process including DFM and DFT for consumer products at scale. 9 Familiar with sensor interface, MIPI Camera CSI and DSI ; display Modules and their communication protocols applications; Power Supply design and distribution for low power applications, motor drive control design, Pwm, DMA control and Audio signal Processing interface.

Responsibilities: 1. Designing and development of new hardware functional system for multiple products. 2. Collaborate with with the embedded software development team for Electronics hardware/ firmware co-design and system performance requirement translating to design implementation ; optimization. 3. Ability to synthesize user and technical performance hardware requirements and develop appropriate solutions. 4. Electronic component and circuit analysis to design functional sub-system by simulation and physical implementation. Requirements & Skills: Must to have: 1. 2 years to 4+ years of experience in low-power circuit design, system bring-up, engineering-build integration and debug. 2. 2 years to 4+ years of experience driving design development from component selection, schematic capture, PCB layout and routing, Component foot-print for the product Electronics BoM through assembly. 3. 3+ of experience in Multi-layer, mixed-signal board-level design in Altium/ Eagle. 4. Experience of power topology: DC-DC, Flyback Converters, LDOs, etc. 5. Experience of Battery charger design, fuel gauge, analogue sensor instrumentation; protection circuits. 6. Hand-on experience in hardware implementation of embedded system data communication protocols such as 1-wire, I2C, SPI, UART, USB. 7. Experience of BDC/ BLDC or steppers motors, motor drive circuit design and its working principles. 8. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCB assembly level. 9. Ability to design and implement smart sensors , sensors instrumentation like current, voltage signal conditioning, Time-of-Flight, Proximity, Position, ALS, etc on a PCB assembly level. 10. Knowledge about Design calculations/Documentation during Product Development Life Cycle milestones. 11.Knowledge of EMI- EMC and ESD standards and practices is a plus Good to have: 1. Strong communication and documentation skills and ability to operate independently. 2. Experience with RTOS 3. Experience with ESP32 and ESP-IDF . 4. Experience with portable, battery operated designs and power budgeting. 5. Knowledge about Wi-fi, Bluetooth, BLE, RF Antenna design Technologies is a plus. 6. Experience of Microphone and Speaker circuit design is a plus 7. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. 8. Hand-on experience of manufacturing process including DFM and DFT for consumer products at scale. 9. Familiar with MIPI Camera CSI and DSI interface implementation ; display Modules and their communication protocols; Audio signal processing interface.

Job Overview: The Electrical Designer is responsible for designing electrical systems and creating detailed drawings and schematics in accordance with project specifications, local codes, and regulations. They work closely with engineers, architects, and other professionals to ensure that electrical systems are integrated seamlessly into the overall design. Key Responsibilities: Designing Electrical Systems Develop electrical layouts, power distribution systems, lighting, and circuit designs. Create schematic diagrams, wiring diagrams, and panel schedules. Select appropriate electrical components and equipment based on project needs. Collaboration and Coordination Collaborate with electrical engineers to ensure designs meet project requirements and codes. Coordinate with other disciplines (mechanical, structural, architectural) to ensure systems work together seamlessly. Review contractor submittals and assist in resolving any design-related issues during construction. Drafting and Documentation Create accurate, detailed electrical drawings and documentation using CAD software (AutoCAD, Revit, etc.). Ensure all electrical design documentation is up-to-date, clear, and easily interpretable. Code Compliance and Safety Ensure that all designs comply with local electrical codes, industry standards, and safety regulations. Perform system calculations and analyze designs to confirm they meet performance and safety standards. Site Visits and Inspections Perform site visits to assess existing conditions, measure spaces, and ensure the accuracy of design. Assist with troubleshooting and resolving electrical issues during construction and installation phases. Project Support Assist project managers and engineers with project cost estimates, timelines, and progress tracking. Provide technical support for construction teams during installation and commissioning. Skills and Qualifications: Education: Typically a degree in Electrical Engineering Technology, Electrical Drafting, or a related field. Experience: At least 2-5 years of experience in electrical design or a related field, with proficiency in CAD software (AutoCAD, Revit, etc.). Technical Skills: Knowledge of electrical codes, standards, and regulations (NEC, IEC, etc.). Attention to Detail: Ability to work with precision and accuracy while meeting deadlines. Communication Skills: Strong ability to communicate technical information clearly, both verbally and in writing. Skills : - Electrical Systems Design CAD (Computer-Aided Design) AutoCAD Revit Power Distribution Lighting Design Circuit Design Wiring Diagrams Panel Schedules Load Calculations Electrical Codes (e.g., NEC, IEC, UL) Electrical Engineering Project Coordination Code Compliance Energy Efficiency Schematic Drawings Troubleshooting Construction Documentation System Integration Electrical Safety Electrical Loads Standards and Regulations Power Systems Lighting Control Systems Panel Design BIM (Building Information Modeling) Sustainability/Green Building Design Electrical Troubleshooting Installation Support Site Assessments Voltage Systems Energy Modeling Load Analysis Low Voltage Systems High Voltage Systems

Description We are seeking a skilled Computer Engineer to join our team in India. The ideal candidate will have 5-10 years of experience in designing, developing, and testing computer systems and components. You will work closely with other engineers and teams to create innovative solutions that meet our clients needs. Responsibilities Design and develop computer hardware and software systems. Analyze and test system requirements and specifications. Collaborate with cross-functional teams to ensure system integration and performance. Troubleshoot and resolve hardware and software issues. Stay updated with the latest technologies and industry trends. Skills and Qualifications Bachelor's degree in Computer Engineering or related field. Strong programming skills in languages such as C, C++, Java, or Python. Proficiency in hardware design and development tools. Experience with embedded systems and microcontrollers. Knowledge of operating systems and networking protocols. Excellent problem-solving and analytical skills. Strong communication and teamwork abilities.

About the job: We're Hiring: EV Electrical Engineer (0-3+ Years Experience) Location: Gurgaon, Sec 37 Experience: 0 - 3+ Year Key responsibilities: 1. Assist in designing and optimizing EV components including wiring harnesses, BMS, and power systems. 2. Help integrate motors, batteries, controllers, and sensors to ensure seamless system performance. 3. Support the development and execution of testing protocols for safety, performance, and AIS/ISO compliance. 4. Learn and apply EMI/EMC standards and ensure manufacturability of electrical systems. 5. Collaborate with mechanical, software, and testing teams for end-to-end system integration. 6. Contribute to R&D efforts for performance enhancement and cost efficiency. 7. Participate in diagnosing and troubleshooting electrical issues in prototypes and production vehicles Who can apply: 1. Diploma & B.E./B.Tech in Electrical, Electronics, Mechatronics, or related fields 2. Passion for electric vehicles and sustainable technology 3. Eagerness to learn and grow in a fast-paced environment 4. Basic understanding of EV systems, circuits, and electrical safety 5. For experienced candidates: Prior work in EV or automotive electrical design is a plus Who can apply: Only those candidates can apply who: are from Gurgaon only are Mechanical Engineering students Salary: ₹ 2,00,000 - 4,50,000 /year Experience: 0 year(s) Deadline: 2025-06-22 23:59:59 Skills required: Embedded Systems, Circuit Design, PCB Design and C++ Programming About Company: Ampra Power is a forward-thinking EV manufacturing company focused on advanced battery technologies and reliable EV charging solutions. With operations in Amritsar and Gurgaon, we are committed to powering the future of sustainable mobility through cutting-edge batteries and high-performance chargers

Work Profile : - Work on development of custom Analog circuit boards for applications related to RF, interfaces etc. - Implement new features and bug fixes - Verify analog/mixed-signal integrated circuits - Develop test cases to verify new features and bug fixes - Review and update the user manuals for software tools. - Supporting digital modelling of analog circuits for mixed-signal verification - Creating design specifications and circuit schematics - Work both independently and in a team environment, with the opportunity to provide technical leadership to other members of the engineering team - Create and/or modify specification documents detailing system design and enhancements to meet marketing requirements - Collaborate with others in the creation of technical reports, whitepapers, and user documentation Requisites : - EE/EEE/ECE graduate, undergraduate degree from reputed Tier 1 or Tier 2 colleges . - Strong knowledge of analog integrated circuit design fundamentals - Proven experience taking designs from concept to production - Experience in analog/mixed-signal IC design & verification - Understanding of BJT, CMOS and Op-Amp technologies. - Good understanding of analog/mixed-signal design flows (Cadence, Synopsys) - Transistor and system level simulation skills - Discrete time and continuous time signal processing skills - Strong lab and silicon validation skills - Verilog based digital design and test bench development, is a plus - Strong communication skills, both written and verbal

About the job: Key responsibilities: 1. Design and develop embedded hardware and firmware for battery diagnostic instruments and test systems 2. Work with high-end lab instruments for measurements and data acquisition 3. Integrate precision measurement circuits and sensors for electrical, thermal, and electrochemical parameter monitoring (voltage, current, temperature, impedance) 4. Develop battery characterization tools using techniques such as OCV-SOC mapping, DCIR, EIS (Electrochemical Impedance Spectroscopy), and SoH estimation 5. Implement embedded communication protocols (e.g., CAN, UART, RS485, SPI, I2C) for data acquisition and system integration 6. Collaborate with data science teams to ensure seamless integration of battery test instruments with higher-level analytics platforms 7. Develop and validate algorithms for SoH and SoC estimation implemented on embedded platforms 8. Lead prototype development, hardware validation, and field testing of diagnostic equipment Who can apply: Only those candidates can apply who: are Electronics Engineering students Salary: ₹ 5,00,000 - 8,00,000 /year Experience: 0 year(s) Deadline: 2025-06-18 23:59:59 Skills required: MATLAB, Python, Raspberry Pi, Embedded Systems, Arduino, Circuit Design, C Programming, C++ Programming, PCB Soldering, Battery Pack Testing, Battery Management Systems, Digital Circuits and Analog Circuits Other Requirements: 1. Bachelor’s or master’s degree in electrical engineering, electronics or computer science 2. Strong programming skills (Python, MATLAB, embedded C) 3. Familiar with battery characterization equipment (Cell Cycler, Pack Cycler, Thermal chamber, Impedance Analyser, etc.) 4. Foundational knowledge about Li-Ion Battery (cell, pack, BMS, Equivalent circuit modeling, etc.) 5. Experience in battery cell and pack characterization techniques (OCV curves, DCIR, cycle life testing, EIS) About Company: ThinkClock Battery Labs is an R&D-driven company focused on battery health analytics using spectroscopy techniques, namely EIS (electrochemical impedance spectroscopy), acoustic, and RF spectroscopy. We reveal the diagnostic insight about the battery health while relating the microscopic data of the battery to the observable system-level behavior with the help of the models based on physics and machine learning. ThinkClock offers lab-based battery characterization services (for performance and uniformity assessment) to cell OEMs and battery pack manufacturers. We are creating a cell benchmarking database for the commercially available cells using the lab-based characterization data to provide an independent source of truth for the system integrators. While leveraging our cell benchmarking database, we have developed a portable tool, CellScope, which can quickly assess the health of a cell using spectroscopic techniques.

About the job: Key Responsibilities: 1. Design and develop embedded systems utilizing ARM Microcontrollers for various electronic products 2. Work on circuit design and PCB layout using EAGLE software to ensure optimal performance and functionality. (Any other PCB design software also works) 3. Program microcontrollers in C language to implement desired features and functionality 4. Collaborate with cross-functional teams to integrate hardware and software components for seamless operation 5. Conduct testing and debugging of embedded systems to identify and resolve any issues or malfunctions 6. Stay updated on industry trends and advancements in embedded systems technology to incorporate into projects 7. Assist in the documentation and technical support for developed embedded systems to ensure smooth operations and maintenance Who can apply: Only those candidates can apply who: have minimum 1 years of experience are Electronics Engineering students Salary: ₹ 2,50,000 - 5,00,000 /year Experience: 1 year(s) Deadline: 2025-06-14 23:59:59 Other perks: Informal dress code, Free snacks & beverages Skills required: ARM Microcontroller, Embedded Systems, Arduino, Circuit Design, C Programming, PCB Design and EAGLE About Company: Since our incorporation in the year 1985, we, 'Prestige Electronics', are a trustworthy organization involved in manufacturing, and exporting a comprehensive range of Electronic Test and Measuring instruments like Micro Ohm Meter, Winding Resistance Meter, Contact resistance meters, Circuit breaker Timer, Million Mega Ohm Meters and Digital Mega Ohm-Meters. Our offered instruments are highly acknowledged in the market for their features like high precision, dimensional accuracy, minimal maintenance, robust construction, precise design, easy to operate, user-friendly, accurate readings, highly efficient and excellent performance. Our organization is strengthened by a team of highly passionate and multi-talented professionals, who carry out our business related activities in a streamlined manner. These professionals are appointed after stringent assessment of their knowledge and skills, which they incorporate in developing these instruments.