BTL India is looking for an electronics hardware Engineer for a senior role with 6 to 8 years of experience to join our R&D Improvement and Support team, which play a major role in ensuring continued design support to post market releases. ROLES AND RESPONSIBILITIES As part of the R&D team, should be able to perform the following duties as assigned by Manager/Leads to support the team’s goals but not limited to the following: Understanding of system level, hardware design & requirements of the system/product. Lead the investigation of production and field issues/failures - Understand the technical issues and drive the root cause analysis. - Collaborate with engineering and production to provide solutions. -Work on closures as per commitments Own and execute mitigations for components obsolescence/supply chain issues: - Provide timely solutions to prevent production stop situations -Identify alternate components based on design requirements & component specification/datasheet comparisons - Perform evaluation & testing as needed for alternate qualifications Perform necessary hands-on testing at circuit level / module level / product level to evaluate the hardware performance for identified HW design changes. Work on circuit simulations, schematics entry, BOM management and PCB layout reviews as needed. Responsible in design change implementations through ECO -Own documentation and co-ordinate reviews and approvals required to process the ECO. Own and implement new feature developments, compliance testing and country registrations for products in production. Responsible for planning, coordinating and implementing considering the timeline, capacities and cost impact etc. Work efficiently with cross functional and production teams to deliver the assigned task/project with quality within the timelines. Production testing – Responsible in fixture and tools development needed for production. ESSENTIAL QUALIFICATION AND EXPERIENCE QUALIFICATION: BE / B.Tech / ME / M.Tech in Electrical/Electronics/Biomedical engineering or equivalent. 6 to 8 Years of experience in working with Hardware designs TECHNICAL COMPETENCY: Strong in fundamentals of Analog and digital electronics. Familiar with the concepts of Microcontrollers / Microprocessors operation and the hardware requirements for designing circuits using them. Understanding of power management systems – DCDC (Buck/Boost) and LDOs. Knowledge of hardware design for communication protocols like UART, SPI, I2C, RS232, USB. Proficient in component selection for circuit design. Experience in using common lab equipment like DMMs, Oscilloscopes, power supplies, Signal generators. Understanding of production process of PCB assembly & production testing BEHAVIORAL COMPETENCY: Good analytical skills Passion for success and being proactive - Take risk and time sensitive approach. Systemic and going in-depth approach Be flexible, hands-on and willing to learn new technologies Be a good team player, with good collaboration skills. ADDITIONAL QUALIFICATION AND EXPERIENCE Circuit simulation experience (LT spice or equivalent) Familiar or exposure in EMI/EMC testing Understanding of Production, Regulatory and Standards Project Management - planning and effort estimation experience will be an added advantage.
Company Description BTL India, part of the globally established BTL, is a leading manufacturer of medical and aesthetic equipment with direct offices in over 80 countries worldwide. Established in New Delhi in 2011, BTL India set up an advanced R&D center in Bengaluru in 2013 that focuses on end-to-end product development. The company aims to introduce innovative technologies to the healthcare industry, supporting BTL Global in adding new products in physical therapy, cardiology, and medical aesthetics. BTL India fosters a culture of inclusivity, trust, teamwork, and continuous improvement, offering best-in-class benefits, flexible work timings, and work-from-home options. Role Description This is a full-time on-site role for a Service Engineer located in Mumbai. The Service Engineer will be responsible for troubleshooting, providing field service, and offering technical support for our medical and aesthetic equipment. Additional responsibilities include maintenance and repair of equipment, ensuring optimum performance and compliance with international standards. The role demands effective communication skills to interact with team members and clients. Qualifications Troubleshooting and Technical Support skills Field Service experience and Maintenance & Repair skills Good Communication skills Ability to work independently and as part of a team BSC or bachelor's degree in engineering, Biomedical Engineering, or related field Experience in the medical equipment industry is a plus Strong problem-solving skills and attention to detail
BTL India is looking for a passionate Mechanical Engineer (2-4 years) for the Design & Development of medical devices in its Bangalore R&D Center. The engineer will be working on New Product Design & Development & will be responsible to plan, design & execute all mechanical design requirements as assigned by the Project Lead right from concept to detailed design, engineering verification & followed by transfer of design to production. ROLES & RESONSIBILITIES As part of the R&D team, the employee should be able to perform following duties to support the team’s goals but not limited to the following: Actively participate in following product development activities – Concept design, design planning, design development & execution stages of new products. Analyze, interpret and establish design requirements based on marketing inputs & available technical data. Collaborate with cross functional teams including Industrial design, Electrical, Marketing and purchasing teams. Research design options and perform experiments to determine potential design feasibility. Prepare clear, concise and accurate conceptual/design models & drawings, defining tolerances, fits, clearances & space requirements Conduct & actively participate in Design reviews. Interact with global design and manufacturing teams to design for manufacturability, reliability and cost-effectiveness. Create DFMEA, Simulations, Tolerance analysis, design calculations to ensure First time right designs Prototyping of designs. Design Verification-Part & mechanical system level verification. Production documentation support. Pre-production, Pilot and Production support. Ensure all mechanical engineering activities are executed as per the development procedure. ESSENTIAL QUALIFICATION AND EXPERIENCE QUALIFICATION & EXPERIENCE: Bachelor’s degree or Masters in Mechanical Engineering or Product design (Mechanical) with 2 to 4 years working experience in a Product Design and Development environment. TECHNICAL COMPETENCY: Experience in design of Electro-Mechanical products (Ex: Medical devices, Consumer appliances) Able to work independently & experience with working in cross functional teams. Experience in working in designs for various manufacturing technologies including plastic injection molding, silicones, precision machining & sheet metal. Experience in selection of materials & various finishing processes. Design calculation and optimization for component & system level, strong foundation and working knowledge in GD & T & stack up analysis. Exposure to working with HW teams for ECD-MCAD convergence & design for electrical safety. Exposure to solving thermal management within the device. Experience with rapid prototype and different prototyping techniques for building proof of concept and Functional prototype for testing. Good analytical skills in problem solving, identifying the technical risks and mitigating them systematically. Hands on Experience with CAD software’s like Solid works with exposure to surface modelling, skeleton model/Master model concept. BEHAVIOURAL COMPETENCY: Excellent Analytical and problem-solving skills. Self-motivated and passion to finish (fire in belly). Clear thinker & able to see the big picture behind every goal in the project. Flexible, hands-on and willing to learn new technologies. Good team player with good collaboration skills. Well organized & effective at work. Additional QUALIFICATION AND EXPERIENCE Medical devices product development experience will be an added advantage. Experience with Medical Device Directive (MDD), ISO 13485, Design controls or similar regulatory environment and QMS will be an added advantage.
Job Description: We are seeking a dynamic and results-driven Sales Representative to join our team in the Physiotherapy Sector, specializing in medical equipment sales. As a Sales Representative, you will play a crucial role in promoting and selling our innovative range of physiotherapy equipment to healthcare professionals and institutions. Job Location : Rajasthan, Gujarat & Madhya Pradesh Responsibilities: Develop and implement effective strategies to achieve or exceed sales targets in the physiotherapy sector. Identify and establish relationships with key decision-makers, including physiotherapists, medical professionals, and healthcare facilities. Conduct product presentations and demonstrations to showcase the features and benefits of our medical equipment. Stay abreast of industry trends, competitor products, and market developments to maintain a competitive edge. Collaborate with the marketing team to create promotional materials and campaigns to enhance product visibility. Provide exceptional customer service by addressing client inquiries, resolving issues, and ensuring overall satisfaction. Prepare and submit sales reports, forecasts, and market intelligence to the management team regularly. Attend industry conferences, trade shows, and networking events to expand professional networks and promote the brand. Qualifications: Bachelor's degree in Physiotherapy, Business, Marketing, or a related field. Proven track record of success in medical equipment sales, preferably in the physiotherapy sector. Excellent communication and interpersonal skills to build and maintain strong relationships with clients. Self-motivated, target-driven, and able to work independently as well as part of a team. Knowledge of physiotherapy equipment and an understanding of the healthcare industry. Ability to travel as required to meet clients and attend industry events. Familiarity with CRM software and other sales tools. Salary: Competitive salary based on market standards.
ROLES AND RESPONSIBILITIES : As part of the R&D team, should be able to perform the following duties as assigned by Manager/Leads to support the team’s goals but not limited to the following: o Understanding the hardware design & requirements of the system/product o Perform root causing of production and field issues/failures o Understand the technical issues and drive the root cause analysis. o Collaborate with engineering and production to provide solutions. o Work on closures in line with commitments o Implement mitigations for components obsolescence/supply chain issues: o Provide timely solutions to prevent production stop situations o Identify alternate components based on design requirements & component specification/datasheet comparisons o Perform evaluation & testing as needed for alternate qualifications o Perform necessary hands-on testing at circuit level / module level / product level to evaluate the hardware performance for identified HW design changes. o Work on circuit simulations, schematics entry, BOM management and PCB layout reviews as needed. o Support in design change implementations through Engineering Change Orders (ECO) o Support in product safety & compliance testing and country registrations for products in production. o Work efficiently with cross functional and production teams to deliver the assigned task/project with quality within the timelines. o Production testing – understanding current production test methods and support for development of new fixtures / tools needed for identified improvements o Do design and test documentation for the developed design. ESSENTIAL QUALIFICATION AND EXPERIENCE : QUALIFICATION: o BE/Btech/ME/Mtech in Electrical/Electronics/Biomedical engineering or equivalent o 3 to 6 Years of experience in working with Hardware designs. TECHNICAL COMPETENCY: o Familiar with the concepts of Microcontrollers / Microprocessors operation and the hardware requirements for designing circuits using them. o Understanding of power management systems – DCDC (Buck/Boost) and LDOs o Knowledge of hardware design for communication protocols like UART, SPI, I2C, RS232, USB o Proficient in component selection for circuit design o Experience in using common lab equipment like DMMs, Oscilloscopes, power supplies, Signal generators o Understanding of production process of PCB assembly & production testing o Familiar with CAD tools like Altium or equivalent for circuit and PCB design BEHAVIORAL COMPETENCY: o Good analytical skills o Passion for success and being proactive o Systemic and going in-depth approach o Be flexible, hands-on and willing to learn new technologies o Be a good team player, with good collaboration skills. ADDITIONAL QUALIFICATION AND EXPERIENCE o Circuit simulation experience (LT spice or equivalent) o Familiar or exposure in EMI/EMC testing o LabVIEW knowledge is an advantage
As a member of the New Product Development (NPD) team, you will be responsible for a variety of tasks related to hardware design and development. Your duties will include requirement detailing, understanding system/product requirements, deriving hardware requirement specifications, proposing innovative hardware ideas, and solving complex design challenges with your technical expertise. You will take ownership of conceptual studies, design, build, test, and troubleshoot feasibility prototypes at the module or system level. Your role will also involve component selections, circuit designs, circuit simulations, BOM management, PCB design, and layout reviews. You will contribute to the integration of various hardware sub-systems into the mechanical assembly, identify technical risks, propose mitigation strategies, and participate in DFMEA processes. Additionally, you will prepare hardware test plans, perform testing at various levels, and work on technical issue closures. Collaboration is key in this role, as you will closely work with project managers, other hardware engineers, software engineers, mechanical engineers, purchase teams, and production teams to ensure the successful delivery of tasks/projects within timelines. Your essential qualifications for this position include a BE/Btech/ME/Mtech in Electrical/Electronics/Biomedical/Instrumentation Engineering or equivalent, along with 6 to 8 years of experience in hardware design. In terms of technical competency, you should have expertise in analog circuit designs, measurement & instrumentation techniques, hardware design integrating Microcontrollers/DSP, communication protocols, power supply designs, and familiarity with circuit simulation tools and equipment like oscilloscopes and signal generators. Behavioral competencies such as analytical skills, proactive attitude, systemic approach, willingness to learn new technologies, and good collaboration skills are essential for this role. Additional competencies/experience in understanding medical standards, EMI/EMC tests, embedded programming, and test automation using Python/LabVIEW would be advantageous.,
Roles and Responsibilities As part of the New Product Development (NPD) team, the candidate should be able to perform the following duties, but they are not limited to the following: Requirement detailing Responsible for understanding the system/product requirements Derive the hardware requirement specifications Derive the Hardware interface specifications for software Hardware System / Subsystem design Propose innovative hardware ideas and apply technical expertise to solve complex design challenges. Take ownership and lead the conceptual studies by designing, building, testing, and troubleshooting feasibility prototypes at the module or system level. Involve in component selections, draw the circuit designs (schematics entry), perform circuit simulations, BOM management, PCB design and layout reviews Prepare the hardware detailed design documentations for the designs Contribute to the integration of various hardware sub-systems of the product, including cables and connectors, into the mechanical assembly Identify the technical risks in the design, propose / implement mitigation strategies and actively participate in DFMEA processes Design Qualification Prepare the hardware test plans and perform necessary hands-on testing at circuit level / module level / product level to evaluate the circuit and system performance. Plan and perform pre-compliance testing for EMI/EMC and safety tests Identify the technical issues and work on their closures Collaboration Work closely with project manager and other hardware engineers to deliver the assigned task/project with quality within the timelines. Coordinate with cross functional teams including software and mechanical engineers, purchase team and production teams to ensure cohesive project execution. ESSENTIAL qualification and experience QUALIFICATION: BE / Btech / ME / Mtech in Electrical/Electronics/Biomedical/Instrumentation Engineering or equivalent 6 to 8 Years of experience in working with Hardware designs. Technical competency: Experienced and strong expertise in Analog circuit designs Op-amps, instrumentation amplifiers for low noise signal conditioning, precision analog front end design , and ADCs for data acquisition. Strong in measurement & instrumentation techniques Impedance measurement principles , Impedance calculation (Phase/Amplitude), frequency response analysis, evaluation of measurement accuracy, resolution, and stability. Experienced in hardware design integrating Microcontrollers / DSP . Good understanding of their architecture, operation, and the requirements for designing circuits using them. Familiar with HW-SW interface specification and defining them Knowledge of communication protocols like UART, SPI, I2C, RS232, RS485, Ethernet Know-how on power supply designs: DC- DC converters (Buck/Boost/LDOs) Tool competency: Circuit simulation tools, Schematic & Layout tools: Altium or similar Experience using equipment like DMMs, Oscilloscopes, power supplies, Signal generators, LCR meters BEHAVIOURAL competency: Good analytical skills Passion for success and being proactive Systemic and going in-depth approach Be flexible, hands-on and willing to learn new technologies Be a good team player, with good collaboration skills. ADDITIONAL COMPETENCY/experience Understanding and working knowledge of medical standards IEC60601-1 Awareness of EMI/EMC tests and design for its compliance. Awareness of embedded programming is a plus Basic knowledge of test automation using Python/LabVIEW is a plus Show more Show less
ROLES AND RESPONSIBILITIES: As a member of the Product Development team, the candidate will be responsible for the following key duties, including but not limited to: Understanding requirements and contributing to ideation and solution generation Conducting feasibility analysis and exploratory research Designing circuits, performing analysis and simulation, selecting components, and designing PCB layouts Drafting and executing hardware design tests, as well as participating in system-level tests such as safety, EMI, and EMC Preparing design and testing documentation Collaborating with cross-functional teams including Mechanical, Software, Testing and Operations team to ensure seamless project execution. ESSENTIAL QUALIFICATION AND EXPERIENCE: QUALIFICATION: o BE/B-Tech/ME/M-tech in Electrical/Electronics/Biomedical engineering or equivalent (2025 pass outs only) TECHNICAL COMPETENCY: o Passionate about hardware engineering with a strong foundation in both analog and digital electronics o Proficient in electronics fundamentals, including circuit design and analysis o Good understanding of microcontroller/microprocessor operations o Familiarity with embedded C programming is an advantage BEHAVIOURAL COMPETENCY: o Possess strong analytical and problem-solving abilities o Flexible, hands-on, and enthusiastic about learning new technologies o Takes a thorough, in-depth approach with a focus on understanding the "why" o Is proactive and capable of effective collaboration with cross-functional teams BTL India.
BTL India is looking for a passionate Mechanical Engineer (2-4 years) for the Design & Development of medical devices in its Bangalore R&D Center. The engineer will be working on New Product Design & Development & will be responsible to plan, design & execute all mechanical design requirements as assigned by the Project Lead right from concept to detailed design, engineering verification & followed by transfer of design to production. ROLES & RESONSIBILITIES As part of the R&D team, the employee should be able to perform following duties to support the team’s goals but not limited to the following: Actively participate in following product development activities – Concept design, design planning, design development & execution stages of new products. Analyze, interpret and establish design requirements based on marketing inputs & available technical data. Collaborate with cross functional teams including Industrial design, Electrical, Marketing and purchasing teams. Research design options and perform experiments to determine potential design feasibility. Prepare clear, concise and accurate conceptual/design models & drawings, defining tolerances, fits, clearances & space requirements Conduct & actively participate in Design reviews. Interact with global design and manufacturing teams to design for manufacturability, reliability and cost-effectiveness. Create DFMEA, Simulations, Tolerance analysis, design calculations to ensure First time right designs Prototyping of designs. Design Verification-Part & mechanical system level verification. Production documentation support. Pre-production, Pilot and Production support. Ensure all mechanical engineering activities are executed as per the development procedure. ESSENTIAL QUALIFICATION AND EXPERIENCE QUALIFICATION & EXPERIENCE: Bachelor’s degree or Masters in Mechanical Engineering or Product design (Mechanical) with 2 to 4 years working experience in a Product Design and Development environment. TECHNICAL COMPETENCY: Experience in design of Electro-Mechanical products (Ex: Medical devices, Consumer appliances) Able to work independently & experience with working in cross functional teams. Experience in working in designs for various manufacturing technologies including plastic injection molding, silicones, precision machining & sheet metal. Experience in selection of materials & various finishing processes. Design calculation and optimization for component & system level, strong foundation and working knowledge in GD & T & stack up analysis. Exposure to working with HW teams for ECD-MCAD convergence & design for electrical safety. Exposure to solving thermal management within the device. Experience with rapid prototype and different prototyping techniques for building proof of concept and Functional prototype for testing. Good analytical skills in problem solving, identifying the technical risks and mitigating them systematically. Hands on Experience with CAD software’s like Solid works with exposure to surface modelling, skeleton model/Master model concept. BEHAVIOURAL COMPETENCY: Excellent Analytical and problem-solving skills. Self-motivated and passion to finish (fire in belly). Clear thinker & able to see the big picture behind every goal in the project. Flexible, hands-on and willing to learn new technologies. Good team player with good collaboration skills. Well organized & effective at work. Additional QUALIFICATION AND EXPERIENCE Medical devices product development experience will be an added advantage. Experience with Medical Device Directive (MDD), ISO 13485, Design controls or similar regulatory environment and QMS will be an added advantage.
Roles and Responsibilities As part of the R&D team, the candidate should be able to perform following (but not limited to) duties to support the team’s goals: Own the complete multilayer PCB design cycle from concept to production release Import mechanical outlines (DXF/EMN/EMP), define constraints, and perform precise component placement as per schematic and layout guidelines Execute PCB routing , focusing on signal integrity, EMI/EMC, and manufacturability Generate and validate Gerber outputs, ensuring conformance with BTL’s in-house manufacturing guidelines Create and maintain CAD libraries (symbols and footprints) aligned with IPC standards and BTL guidelines. Collaborate with hardware engineers for layout reviews and constraint management Work closely with the MCAD team to ensure mechanical compatibility and integration Ensure adherence to DFM/DFT/DFA guidelines and BOM optimization Handle project deliverables independently , managing timelines and quality checkpoints Support documentation, version control , and release workflows using BTL’s internal systems Contribute to process improvements , share layout best practices, and help evolve internal checklists and guidelines. ESSENTIAL qualification and experience QUALIFICATION: Bachelor’s degree in Electrical/Electronics/Instrumentation Engineering or equivalent 6 to 8 Years of hands-on experience in PCB layout for embedded hardware systems Technical competency: Tool Proficiency: Expert in Altium Designer (schematics, library management, PCB layout, Gerber generation) Design Expertise: Multilayer rigid and rigid-flex PCB designs High-speed routing, impedance control, grounding techniques Mixed-signal layout including differential pairs (LVDS, RS485, USB, Ethernet) Design for EMI/EMC , thermal management, and mechanical fit Manufacturing Knowledge: Strong understanding of DFM/DFA principles Knowledge of PCB fabrication processes and assembly standards Experience coordinating with FAB and assembly house for reviews and engineering queries DFT and Variants: Design for testability using ICT/FPT BOM management and variant generation in Altium BEHAVIOURAL competency: Passion for success, proactive and quality focused Strong sense of ownership and ability to deliver with minimal supervision Detail-oriented with a structured and systematic design approach Open to learning, feedback, and working in fast-paced, multi-project environments Strong collaboration skills, especially in cross-functional hardware-mechanical teams
As a member of the New Product Development (NPD) team, your role involves various responsibilities including: - Understanding and detailing system/product requirements - Deriving hardware requirement and interface specifications - Designing hardware systems/subsystems - Proposing innovative hardware solutions to solve complex design challenges - Leading conceptual studies, designing prototypes, and troubleshooting feasibility - Selecting components, drawing circuit designs, performing simulations, BOM management, PCB design, and layout reviews - Preparing detailed hardware design documentation - Integrating hardware sub-systems into mechanical assemblies - Identifying technical risks, proposing mitigation strategies, and participating in DFMEA processes - Creating hardware test plans and conducting testing for circuit and system performance - Performing pre-compliance testing for EMI/EMC and safety - Collaborating with project managers, hardware engineers, software engineers, and other cross-functional teams for project delivery Qualification required for this role includes: - BE / Btech / ME / Mtech in Electrical/Electronics/Biomedical/Instrumentation Engineering or equivalent - 6 to 8 years of experience in hardware designs Your technical competencies should include: - Strong expertise in Analog circuit designs, Op-amps, instrumentation amplifiers, precision analog front end design, ADCs, etc. - Proficiency in measurement & instrumentation techniques, impedance calculation, frequency response analysis, etc. - Experience in hardware design integrating Microcontrollers / DSP and communication protocols like UART, SPI, I2C, RS232, RS485, Ethernet - Knowledge of power supply designs and circuit simulation tools, schematic & layout tools - Experience with testing equipment like DMMs, Oscilloscopes, power supplies, etc. In terms of behavioral competencies, you should possess: - Good analytical skills - Proactive attitude towards success - Systemic and in-depth approach to problem-solving - Flexibility, hands-on approach, and willingness to learn new technologies - Strong collaboration and teamwork skills Additional competencies/experience that would be beneficial for this role include: - Understanding and working knowledge of medical standards like IEC60601-1 - Awareness of EMI/EMC tests and compliance design - Knowledge of embedded programming and test automation using Python/LabVIEW is a plus This comprehensive description outlines the key responsibilities, qualifications, technical competencies, behavioral competencies, and additional competencies/experiences required for the role.,
Role Overview: As a member of the New Product Development (NPD) team, your role will involve understanding product specifications and software requirements. You will be responsible for designing software modules to ensure they meet quality, performance, maintainability, and extensibility standards. Additionally, you will engage in hands-on software development, assist in debugging, and resolve critical issues as needed. Providing technical guidance to junior engineers, conducting design/code reviews, estimating software development activities, and ensuring compliance with BTL quality management process are key aspects of your role. Key Responsibilities: - Understand product specifications and software requirements - Design software modules meeting quality, performance, maintainability, and extensibility criteria - Perform hands-on software development and assist in debugging - Provide technical guidance to junior engineers and conduct design/code reviews - Estimate software development activities and ensure compliance with quality management process Qualification Required: - Bachelor or master's degree in Electronics or similar engineering stream - Around 5 years of experience in design and development of embedded firmware Additional Details: The ideal candidate should have proven experience in designing and developing microcontroller-based embedded firmware. Proficiency in firmware development using C, C++ with and without any OS, experience in unit testing and automated unit test frameworks, good knowledge of embedded system fundamentals, including microcontrollers, peripherals, communication protocols, etc., system-level understanding, and experience in agile development processes and continuous integration tools are essential. Behavioral competencies such as being proactive, having good analytical thinking, being systematic and organized, and working collaboratively with the team are highly valued for this role.,
ROLES AND RESPONSIBILITIES As part of the R&D team, should be able to perform the following duties as assigned by Manager/Leads to support the team’s goals but not limited to the following: o Understanding of system level, hardware design & requirements of the system/product o Lead the investigation of production and field issues/failures o Understand the technical issues and drive the root cause analysis. o Collaborate with engineering and production to provide solutions. o Work on closures as per commitments o Own and execute mitigations for components obsolescence/supply chain issues: o Provide timely solutions to prevent production stop situations o Identify alternate components based on design requirements & component specification/datasheet comparisons o Perform evaluation & testing as needed for alternate qualifications o Perform necessary hands-on testing at circuit level / module level / product level to evaluate the hardware performance for identified HW design changes. o Work on circuit simulations, schematics entry, BOM management and PCB layout reviews as needed. o Responsible in design change implementations through ECO o Own documentation and co-ordinate reviews and approvals required to process the ECO. o Own and implement new feature developments, compliance testing and country registrations for products in production. o Responsible for planning, coordinating and implementing considering the timeline, capacities and cost impact etc. o Work efficiently with cross functional and production teams to deliver the assigned task/project with quality within the timelines. o Production testing – Responsible in fixture and tools development needed for production ESSENTIAL QUALIFICATION AND EXPERIENCE : QUALIFICATION: o BE/Btech/ME/Mtech in Electrical/Electronics/Biomedical engineering or equivalent o 6 to 8 Years of experience in working with Hardware designs. TECHNICAL COMPETENCY: o Strong in fundamentals of Analog and digital electronics o Familiar with the concepts of Microcontrollers / Microprocessors operation and the hardware requirements for designing circuits using them. o Understanding of power management systems – DCDC (Buck/Boost) and LDOs o Knowledge of hardware design for communication protocols like UART, SPI, I2C, RS232, USB o Proficient in component selection for circuit design o Experience in using common lab equipment like DMMs, Oscilloscopes, power supplies, Signal generators o Understanding of production process of PCB assembly & production testing BEHAVIORAL COMPETENCY: o Good analytical skills o Passion for success and being proactive o Systemic and going in-depth approach o Be flexible, hands-on and willing to learn new technologies o Be a good team player, with good collaboration skills. ADDITIONAL QUALIFICATION AND EXPERIENCE o Circuit simulation experience (LT spice or equivalent) o Familiar or exposure in EMI/EMC testing o Understanding of Production, Regulatory and Standards o Project Management - planning and effort estimation experience will be an added advantage.
ROLES AND RESPONSIBILITIES: As part of the medical product development and support team, should be able to perform the following duties to support the company's goals: Analyze software requirements and create the design for an assigned module, subsystem or a new feature. Implement the module as per design and perform unit testing. Integrate modules within the software architecture and contribute to the integration testing. Analyze released products to understand architecture and design details and identify possible upgrades, feature additions etc. Analyze, troubleshoot and implement solutions to support time to time upgrade as per medical standards requirements and specific to various new country registrations. Analyze issues/complaints reported from production/field/service and respond quickly with trouble shooting solutions. Conduct detailed verifications and testing for the formal release of upgrades or new features to production through the ECO process. Develop prototypes to evaluate various libraries, frameworks and to support the hardware team. Contribute in software documentation in all the phases of the product life cycle. Comply with the requirements of the Quality Management System, including understanding the quality requirements for the role. Understand the identified technical issues and work on closures as per guidance. Work efficiently with hardware, software and mechanical development teams to deliver the assigned task/project with quality within the timelines. ESSENTIAL QUALIFICATION AND EXPERIENCE QUALIFICATION: Bachelors or Masters engineering degree in Electronics and Communications or similar discipline. TECHNICAL COMPETENCY: 5-8 years of experience in developing firmware, drivers and applications on embedded platforms using C/C++. Experience in developing firmware for STM microcontrollers. Good knowledge of embedded system fundamentals like microcontrollers, peripherals, embedded operating system concepts, communication protocols, etc. Experience in working with the hardware teams for hardware / software integration points. Experience in build automation, continuous integration, automated unit test frameworks and config management tools. BEHAVIOURAL COMPETENCY: Excellent analytical and problem-solving skills. Self-motivated and passionate to finish on time. Ability to learn new areas quickly. Good team player with good collaboration skills.
As part of the New Product Development (NPD) team, you will be responsible for the following key responsibilities: - Requirement detailing - Understanding the system/product requirements - Deriving the hardware requirement specifications - Deriving the Hardware interface specifications for software - Hardware System / Subsystem design - Proposing innovative hardware ideas and applying technical expertise to solve complex design challenges - Taking ownership and leading the conceptual studies by designing, building, testing, and troubleshooting feasibility prototypes at the module or system level - Involving in component selections, drawing the circuit designs (schematics entry), performing circuit simulations, BOM management, PCB design and layout reviews - Preparing the hardware detailed design documentations for the designs - Contributing to the integration of various hardware sub-systems of the product, including cables and connectors, into the mechanical assembly - Identifying the technical risks in the design, proposing/implementing mitigation strategies, and actively participating in DFMEA processes - Design Qualification - Preparing the hardware test plans and performing necessary hands-on testing at circuit level/module level/product level to evaluate the circuit and system performance - Planning and performing pre-compliance testing for EMI/EMC and safety tests - Identifying the technical issues and working on their closures - Collaboration - Working closely with project manager and other hardware engineers to deliver the assigned task/project with quality within the timelines - Coordinating with cross functional teams including software and mechanical engineers, purchase team, and production teams to ensure cohesive project execution Qualifications Required: - BE / Btech / ME / Mtech in Electrical/Electronics/Biomedical/Instrumentation Engineering or equivalent - 6 to 8 Years of experience in working with Hardware designs Additional Details: - Understanding and working knowledge of medical standards IEC60601-1 - Awareness of EMI/EMC tests and design for its compliance - Awareness of embedded programming is a plus - Basic knowledge of test automation using Python/LabVIEW is a plus Technical competencies required: - Experienced and strong expertise in Analog circuit designs: Op-amps, instrumentation amplifiers for low noise signal conditioning, precision analog front end design, and ADCs for data acquisition - Strong in measurement & instrumentation techniques: Impedance measurement principles, Impedance calculation (Phase/Amplitude), frequency response analysis, evaluation of measurement accuracy, resolution, and stability - Experienced in hardware design integrating Microcontrollers / DSP. Good understanding of their architecture, operation, and the requirements for designing circuits using them - Familiar with HW-SW interface specification and defining them - Knowledge of communication protocols like UART, SPI, I2C, RS232, RS485, Ethernet - Know-how on power supply designs: DC- DC converters (Buck/Boost/LDOs) - Tool competency: Circuit simulation tools, Schematic & Layout tools: Altium or similar - Experience using equipment like DMMs, Oscilloscopes, power supplies, Signal generators, LCR meters Behavioral competencies required: - Good analytical skills - Passion for success and being proactive - Systemic and going in-depth approach - Be flexible, hands-on and willing to learn new technologies - Be a good team player, with good collaboration skills,
Job Title: Service Engineer- Medical Equipment (Physiotherapy & Aesthetic) Job Location: Mumbai Job Description: The Service Engineer is responsible for the installation, maintenance, and repair of physiotherapy and aesthetic medical devices in customer facilities. This role requires a blend of technical expertise, customer service skills, and the ability to work independently in a fast-paced environment. Responsibilities: 1. Install physiotherapy and aesthetic medical equipment according to manufacturer's specifications. 2. Perform preventive maintenance procedures to ensure optimal performance and longevity of equipment. 3. Troubleshoot equipment malfunctions, diagnose problems, and implement effective repairs. 4. Provide technical support and training to customers on proper use and operation of the equipment. 5. Maintain accurate service records, including documentation of all installations, repairs, and maintenance activities. 6. Ensure compliance with safety regulations and protocols for medical devices. 7. Stay up-to-date on the latest technologies and advancements in physiotherapy and aesthetic medical devices through ongoing training. 8. Extensive travel for field service calls. Qualifications: · Diploma or degree in Electronics Engineering, Biomedical Engineering, or a related field. · Good customer service skills with the ability to communicate effectively with healthcare professionals. · Minimum of 1-2 years of experience in servicing medical equipment, preferably in physiotherapy or aesthetics. · Strong understanding of electrical and mechanical principles. · Excellent troubleshooting and problem-solving skills. · Proficiency in using diagnostic tools and equipment. · Ability to work independently, manage time effectively, and meet deadlines.
Job Title: Service Engineer- Medical Equipment (Physiotherapy & Aesthetic) Job Location: Mumbai Job Description: The Service Engineer is responsible for the installation, maintenance, and repair of physiotherapy and aesthetic medical devices in customer facilities. This role requires a blend of technical expertise, customer service skills, and the ability to work independently in a fast-paced environment. Responsibilities: 1.Install physiotherapy and aesthetic medical equipment according to manufacturer's specifications. 2.Perform preventive maintenance procedures to ensure optimal performance and longevity of equipment. 3.Troubleshoot equipment malfunctions, diagnose problems, and implement effective repairs. 4.Provide technical support and training to customers on proper use and operation of the equipment. 5.Maintain accurate service records, including documentation of all installations, repairs, and maintenance activities. 6.Ensure compliance with safety regulations and protocols for medical devices. 7.Stay up-to-date on the latest technologies and advancements in physiotherapy and aesthetic medical devices through ongoing training. 8.Extensive travel for field service calls. Qualifications: Diploma or degree in Electronics Engineering, Biomedical Engineering, or a related field. Good customer service skills with the ability to communicate effectively with healthcare professionals. Minimum of 1-2 years of experience in servicing medical equipment, preferably in physiotherapy or aesthetics. Strong understanding of electrical and mechanical principles. Excellent troubleshooting and problem-solving skills. Proficiency in using diagnostic tools and equipment. Ability to work independently, manage time effectively, and meet deadlines.