26 Vt Jobs

To coordinate, conduct, and documentNon-Destructive Testing (NDT) activities across all welding stages and projectrequirements , ensuring that all jobs meet therelevant code, client standards, and acceptance criteria without delaying flowor compromising safety. Key Responsibilities 1. Plan and coordinate NDT testing (in-house oroutsourced) for all welds as per project specifications, ITPs, andclient-approved procedures. 2. Ensure the availability and readiness of NDT personnel,tools, and documentation before the job reaches its inspection stage. 3. Carry out or coordinate the following NDT methods asapplicable: o VisualTesting (VT) primary inspection of weld bead, surfacedefects, undercut, and overlap o LiquidPenetrant Testing (LPT/DPT) for surface cracks in filletwelds, corner joints, and SS jobs o MagneticParticle Testing (MPT) for ferromagnetic jobs (lessapplicable in SS, but relevant for any MS assemblies) o UltrasonicTesting (UT) for subsurface and volumetric inspection incritical butt joints or heavy welds o RadiographicTesting (RT/X-ray) for full-penetration welds where specifiedby client or code o PositiveMaterial Identification (PMI) for material mix-up preventionin high-specification SS components o Hardness,Ferrite, or Surface Roughness Checks where required byQA/Welding Expert or client 4. Ensure tests are conducted only after job is fullyready avoid premature offers or repeated attempts. 5. Mark and isolate jobs pending NDT prevent them fromproceeding to next stage until cleared. 6. Coordinate with third-party agencies for witnessing andapproval where needed. 7. Maintain NDT reports, maps, and traceability documentsin proper formats linked to job ID, weld ID, operator ID, and shift. 8. Escalate repeat failures, inconsistent readings, ortest rejections to QC Lead and Welding Expert for investigation. 9. Monitor equipment calibration, validity of NDT agencyapprovals, and Level II/III certification documents. 10. Provideinspection data during client audits and walkdowns; support QA in maintainingNDT records in ISO or client formats. 11. Supporttraining of junior QC staff on NDT interpretation and reporting discipline. Responsibilities Outsidethe Scope of This Role Does not interpret test standards oraccept/reject results independently unless certified escalates to LevelII/III or QC Lead as required Does not perform welding, rework, or repair only validates results and traceability Does not schedule project flow tests must alignwith fabrication sequence and readiness Does not control quality systems but ensurestesting aligns with QA-defined ITP and project specs Qualifications Experience Diploma or B.Tech in Mechanical / Metallurgy /Welding Engineering / NDT Technician 2 + years of experience in NDT coordination or execution in fabrication or EPC projects NDT Level IIcertification (at minimum) in VT and LPT; UTand RT preferred Familiarity with ASME, AWS, EN, and ISOstandards applicable to SS fabrication Experience coordinating outsourced NDT orin-house lab teams Strong understanding of NDT documentation,mapping, and traceability Good communication for the client, agency, andshift coordination Preferred: Experience in stainless steel or infrastructure fabrication setup

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. 7-14 yrs experience in Physical Design and timing signoff for high speed cores. Should have good exposure to high frequency design convergence for physical design with PPA targets and PDN methodology. Masters/Bachelors Degree in Electrical/Electronics science engineering with at least 7+ years of experience in IC design. Experience in leading block level or chip level Physical Design, STA and PDN activities. Work independently in the areas of RTL to GDSII implementation. Ability to collaborate and resolve issues wrt constraints validation, verification, STA, Physical design, etc. Knowledge of low power flow (power gating, multi-Vt flow, power supply management etc.) Circuit level comprehension of time critical paths in the design Understanding of deep sub-micron design problems and solutions (leakage power, signal integrity, DFM etc.) Tcl/Perl scripting Willing to handle technical deliveries with a small team of engineers. Strong problem-solving skills. Applicants Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

You will be working as a full-time, on-site PCN NDT LEVEL2 Technician at SATYAKIRAN ENGINEERS PRIVATE LIMITED in Delhi, India. In this role, you will be responsible for conducting non-destructive testing using various methods such as Eddy Current and Ultrasonics. Your tasks will include performing NDT inspections, ensuring compliance with safety standards, documenting inspection results, and collaborating with the quality control team. To qualify for this position, you should hold a PCN Level 2 or ISO 9712 Level 2 certification in UT, MT, RT, PT, ET, or VT with relevant experience in the testing methods. You should have a minimum of 2 years of hands-on practical experience in the field. Good communication skills are necessary to interact with customers on-site. Attention to detail and strong documentation skills are essential for this role. You should be able to work independently and be based in Delhi. Possessing relevant certifications and qualifications in non-destructive testing is required, and experience in Third-Party inspections would be advantageous.,

Post- Senior Engineer and Assistant Manager Email - punejobs02@gmail.com Contact - 9356395439 Location - Pune Chakan Alandi Phata Education: A degree in engineering, manufacturing, or a related field is often preferred. Experience: 8 to 10 Year Prior experience in quality assurance or fabrication, Heavy fabrication, NDT, Powder coating, Painting environment is typically required. Technical Skills: Knowledge of quality control methodologies, tools (like Six Sigma,7QC Tool), and fabrication processes. Role & responsibilities Key Roles and Responsibilities 1. Quality Assurance Oversight: Assist in developing and implementing quality assurance processes and standards. Conduct regular audits and inspections of fabrication processes to ensure compliance with quality standards. 2. Team Management: Supervise quality control inspectors and technicians. Train staff on quality control procedures and standards. 3. Data Analysis: Analyze quality control data to identify trends, defects, and areas for improvement. Prepare reports on quality metrics for management review. 4. Problem Solving: Investigate quality issues and coordinate with fabrication teams to implement corrective actions. Facilitate root cause analysis for defects and non-conformances. 5. Documentation and Compliance: Maintain accurate records of inspections, tests, and quality control activities. Ensure compliance with industry standards, regulations, and company policies. 6. Collaboration: Work closely with engineering, production, and supply chain teams to enhance product quality. Participate in cross-functional teams to improve fabrication processes. 7. Continuous Improvement: Drive initiatives for continuous improvement in quality processes and systems. Stay updated on industry trends and best practices in quality management. 8. Customer Interaction: Address customer complaints related to product quality and provide timely resolutions. Gather feedback from customers to inform quality improvements.

We at Marquardt India are looking for a highly skilled professional with 4 to 6 years of experience in the automotive embedded domain, who can efficiently handle both Service & Solutions (S&S) and Testing responsibilities. The ideal candidate should have deep expertise in Vector tools and automotive protocols, and should be capable of designing, configuring, and maintaining HIL setups as well as executing end-to-end testing (manual & automated) for products such as Battery Management Systems (BMS), High Voltage Sensors, and other EV domain components. Role & responsibilities:- -Design and build Vector HIL setups including Canoe configuration, wiring harness design, and HIL bench setups -Develop and maintain Canoe configurations and CAPL/Python scripts for simulation and automation - Support VT System configuration and debugging for various ECUs - Read and interpret electronic schematics and wiring diagrams - Collaborate with development teams to understand product test needs and ensure infrastructure readiness - Develop and execute test cases (manual and automated) for embedded automotive products - Perform automated testing using VT HIL systems Good to Have: - Experience with Battery Management Systems (BMS), OTA features, and High Voltage Sensors - Exposure to EV vehicle architectures Interested candidates can write to - sheetal.gaikwad@marquardt.com

As a Dimensional Inspection Specialist at Siemens Energy, you will play a crucial role in ensuring that inspections are conducted in accordance with specifications. Your responsibilities will include reviewing technical and formal documentation, identifying any discrepancies, and effectively communicating these issues to the relevant teams for resolution. Collaboration with cross-departmental colleagues will be essential in implementing necessary corrective actions. You will have the opportunity to work as part of a distributed team, engaging with coworkers from various regions. Your impact will be significant as you take the lead in preparing, executing, and following up on dimensional inspections for both raw and finished cast components. Conducting manual dimensional inspections at supplier sites for components used in power generation equipment, such as gas, steam turbines, and generators, will be a key aspect of your role. You will also spearhead supplier qualification and development initiatives, contributing actively to enhancing supplier quality and the quality of purchased parts. Proactively implementing preventive measures at suppliers to address and mitigate potential quality issues will be crucial. Your ability to collaborate effectively with internal teams and drive quality improvements will be instrumental in your success. Additionally, conducting internal reviews of technical drawings to ensure compliance and accuracy will be part of your regular tasks. To excel in this role, you should possess a minimum of 8 years of relevant professional experience in dimensional inspection. A background in mechanical engineering, manufacturing technology, or metalworking, coupled with experience in quality assurance and measurement techniques, will be advantageous. Strong collaboration and communication skills, a proactive approach, and flexibility are qualities that will contribute to your success in this position. Familiarity with advanced measurement methods, including 3D captured and evaluated measurement data, will be beneficial, with modeling experience considered a plus. Proficiency in MS Office applications and SAP, as well as fluency in English, are essential requirements. Willingness to travel nationally, internationally, and intercontinentally as needed is expected. Knowledge of quality methodologies such as 5 Whys, FMEA, 8D, and RCA would be advantageous, while experience or certifications in NDT (VT, PT, or MT) are preferred. Joining the collaborative and forward-thinking team at Siemens Energy's Industrial Application business, you will work alongside colleagues dedicated to enhancing the competitiveness and profitability of the company. The team collaborates closely with sales, proposal, and R&D teams to drive cost-out projects from idea generation to full implementation. Open communication, innovation, and a shared commitment to delivering high-quality, cost-effective solutions for customers are values that the team upholds. At Siemens Energy, you will be part of a global company with over 100,000 employees in more than 90 countries. The organization is committed to developing energy systems of the future to meet the growing energy demand sustainably. The company's research departments and factories create technologies that drive the energy transition and contribute to a significant portion of the world's electricity generation. Siemens Energy's distributed team is dedicated to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is achievable. The company's 150-year legacy of innovation underscores its commitment to decarbonization, new technologies, and energy transformation. Diversity is celebrated at Siemens Energy, with employees from over 130 nationalities contributing their creative energy to drive innovation and progress. Inclusion and diversity are core principles that fuel the organization's success. As an employee of Siemens Energy, you will enjoy benefits such as remote working arrangements, medical insurance coverage for you and your family, and the option to opt for a Meal Card as part of your compensation package. Discover how you can contribute to Siemens Energy's mission by visiting: [Siemens Energy Careers Page](https://www.siemens-energy.com/employeevideo),

Basic instrument knowledge knowledge about GD&T & NTD Level 2 Certified Updates job knowledge by participating in educational opportunities and reading technical publications, Keeps measurement equipment operating by following operating instructions

Basic Instrument Knowledge Experience in NDT Level 2 (VT) Knowledge about Fabrication, welding and GD&T (Symbols or Drawings) Quality Inspection

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. Additional 7-14 yrs experience in Physical Design and timing signoff for high speed cores. Should have good exposure to high frequency design convergence for physical design with PPA targets and PDN methodology. Masters/Bachelors Degree in Electrical/Electronics science engineering with at least 7+ years of experience in IC design. Experience in leading block level or chip level Physical Design, STA and PDN activities. Work independently in the areas of RTL to GDSII implementation. Ability to collaborate and resolve issues wrt constraints validation, verification, STA, Physical design, etc. Knowledge of low power flow (power gating, multi-Vt flow, power supply management etc.) Circuit level comprehension of time critical paths in the design Understanding of deep sub-micron design problems and solutions (leakage power, signal integrity, DFM etc.) Tcl/Perl scripting Willing to handle technical deliveries with a small team of engineers. Strong problem-solving skills. Applicants Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Desired Skills Knowledge:Knowledge of ASME, TEMA, EIL, EN, IS-codes, etc. Skills :CSWIP 3.1/ AWS-CWI/ IWE certification is mandatory, EN 9712 VT Level 2 is mandatory, NDT Level II (RT, UT, MT, VT, LPT) Role & Responsibilities Familiar with Pressure Vessel, Heat Exchangers and Piping inspections and documentations. Welding inspection techniques, Preparation and approval of WPS, PQR, WPQ, Preparation of Weld maps and Weld Test Plans (WTP) are mandatory. Knowledge of Welding and cutting processes, PWHT cycle, Welding techniques, and welding sequencing is desired. Knowledge of ASME, AWS and EN codes is desired. ASNT NDT (PT, RT, MT, UT, VT) Level II certification. Knowledge about quality Procedures Inhouse & Outside Inspection & expediting at vendor place Offering the equipment/s for TPIA/Client inspection and testing. Customer complaint Role & responsibilities Preferred candidate profile - Experience - Min. 10-15 Years Preferred Industry- Oil & Gas / Refining / Petrochemicals/ Chemical Education/Qualification- Min: Diploma/BE/ME Mechanical

The opportunity: As an Engineering authority specializing in design studies and performance evaluation studies for projects and tenders related to Flexible A.C. Transmission Systems (FACTS) technology within the Power Quality Solutions (PQS) Business, you will play a crucial role in shaping the future of power systems. How you'll make an impact: You will be responsible for defining topology and single line diagrams for FACTS solutions based on customer requirements. Additionally, you will specify main circuit components such as Power Transformers, Power Electronics Valves, Reactors, Capacitors, CT, VT, Breakers, etc., according to customer specifications and international standards. Coordinating with suppliers to optimize the design of these components and evaluating their design and test record documents will be a key aspect of your role. Your responsibilities will also include performing design studies such as harmonic performance assessments, protection design, insulation coordination (including TOV/TRV/lighting studies), loss evaluation, and reliability studies. You will create and validate power system equivalents in RMS using software packages such as PSSE, DIgSILENT, PSCAD, and EMTP. Staying updated with new control methodologies for FACTS application and developing a deep understanding of control algorithms will be essential. You will conduct dynamic performance studies using FACTS devices integrated into power system networks, developing FACTS solution models in multiple software packages, and coordinating with other disciplines involved in project and tender deliveries. Your role will also involve close coordination and participation in research and development activities as per business requirements, as well as engaging in customer discussions to support Project Management, Product Management, and Application Engineering teams in customer acquisition and consultation. Your background: To excel in this role, you should hold a Ph.D. in Power Systems with 1-3 years of relevant work experience, an M. Tech in Power Systems with 2-5 years of relevant work experience, or a B.E/B. Tech in Electrical Engineering with 5-10 years of relevant work experience. It is essential to have experience in specifying power system components, evaluating vendor documents, and/or conducting grid integration studies for power electronics converter-based applications like FACTS, HVDC, wind, solar, and battery energy storage plants. Having knowledge of simulation tools such as PSCAD, PSSE, DIgSILENT, EMTP, RTDS, MATLAB, and an in-depth understanding of international standards (IEEE/IEC/GIGRE) for specifying power system components and solutions will be beneficial. Your ability to work effectively in multi-disciplinary and multi-cultural teams, excellent communication skills, attention to detail, and commitment to delivering high-quality digital solutions are crucial for success in this role. In conclusion, this position offers a unique opportunity to contribute significantly to the advancement of power systems technology while upholding Hitachi Energy's core values of safety and integrity. If you are a motivated, creative thinker with a passion for problem-solving and a desire to work in a dynamic environment, we encourage you to apply and be part of our innovative team.,

The opportunity: As an Engineering authority specializing in design studies and performance evaluation studies for projects/tenders related to Flexible A.C. Transmission Systems (FACTS) technology aligned with Power Quality Solutions (PQS) Business, you will play a crucial role in shaping the future of power systems. How you'll make an impact: - You will define the topology and single-line diagram for FACTS solutions based on customer requirements. - You will specify main circuit components such as Power Transformer, Power Electronics Valves, Reactors, Capacitors, CT, VT, Breaker, etc., according to customer specifications and international standards. - Coordinating with suppliers, you will ensure optimal design of the mentioned components and evaluate their design and test record documents. - Your responsibilities will also include performing design studies such as harmonic performance, protection design, insulation coordination, loss evaluation, and reliability study. - You will create and validate power system equivalents in RMS (PSSE/DIGSILENT) and EMT (PSCAD/EMTP) software packages. - Developing an understanding of control algorithms and staying updated with new control methodologies for FACTS applications will be a key part of your role. - Dynamic performance studies, with FACTS devices integrated into power system networks, will be conducted using RMS and EMT software packages. - You will develop FACTS solution models in multiple RMS and EMT software packages, ensuring accuracy and efficiency. - Collaboration and communication with other disciplines involved in project and tender deliveries will be essential. - Your involvement in research and development activities as per business requirements is expected. - Participating in customer discussions and supporting Project Management/Product Management/Application Engineering teams in customer acquisition and consultation will be part of your responsibilities. - Ensuring compliance with applicable external and internal regulations, procedures, and guidelines will be your responsibility, reflecting Hitachi Energy's core values of safety and integrity. Your background: - Ideally, you hold a PhD in Power Systems with 1-3 years of relevant work experience, an M. Tech in Power Systems with 2-5 years of relevant work experience, or a B.E/B. Tech in Electrical Engineering with 5-10 years of relevant work experience. - You should have an in-depth understanding of the basics of power system steady state, dynamic, and transient behavior. - Experience in specifying power system components, evaluating vendor documents, and/or conducting grid integration studies for power electronics converter-based applications is desired. - Knowledge of simulation tools like PSCAD, PSSE, DIGSILENT, EMTP, RTDS, and MATLAB, as well as an understanding of international standards for specifying power system components/solutions, is beneficial. - You should be a good team player, capable of working effectively in multi-disciplinary and multi-cultural teams. - Strong communication skills, organizational abilities, attention to detail, ambition, creativity, problem-solving skills, and the ability to work in a fast-paced environment are essential qualities for this role. Qualified individuals with disabilities requiring accessibility assistance during the job application process can request reasonable accommodations by completing a general inquiry form on the Hitachi Energy website. Specific details about the required accommodation should be included to support applicants during the application process.,

Department: Design Location: Aurangabad, Maharashtra Qualification: Bachelors or Master’s degree in Electrical Engineering. Experience: • 3 to 5 years of experience in Instrument transformers (12kV and above), manufacturing industry. Experience with CAD software and simulation tools (e.g., ANSYS, SolidWorks). Preferred Skills: Should have knowledge of Indian & International standards applicable for MV & HV switchgear products like breaker, Instrument Transformer, Vacuum Interrupter, HT capacitor etc. Thorough knowledge of Electromagnetic & Electrostatic design for Instrument transformer and condenser bushings. Knowledge of Electrostatic, Electromagnetic & thermal engineering and verification/validation of product design by using ANSYS software. Knowledge of calculating design stage product Raw Material cost. Knowledge of type testing of products. Basic Knowledge Six Sigma tools such as FMEA. Should be able to do Spec-in in Tenders , support marketing team for preparing sales pitch. Technical Presentation skills Job Summary: We are seeking a highly motivated and experienced Design & Development Engineer to join our team specializing in electrical switchgear products, with a strong focus on instrument transformers and condenser Bushing. The idea candidate will have Strong understanding of electrical switchgear principles, instrument transformer design and applications. Key Responsibilities: To prepare Technical Instructions for the procurement, production & QA team Assembly and disassembly of In-house and benchmark products. Study, Design and Implement best manufacturing practices. Development of New products by--- 1. Electrical design that includes design calculations, drawings, bill of material schematics etc. 2. Coordination with Internal and External Customers and suppliers for manufacturing of components. 3. Active participation in assembly of new designed products . 4. Addressing corrective and preventive actions. 5. Validation of products at inhouse type or third -party lab. 6. Preparation of technology/product transfer manual. 7. Preparation of technical specifications, technical manufacturing instructions & SOPs for new product development. 8. Involved in RM cost reduction initiatives.

We are seeking a talented and detail-oriented Physical Backend Design Engineer to join our IC (Integrated circuit) development team. The role involves key aspects of physical design, including automated place and route, floorplanning, clock tree synthesis (CTS), static timing analysis (STA), power analysis, and physical verification (DRC/LVS). The ideal candidate will have a strong knowledge of physical design methodologies, experience with industry-standard tools, and a passion for delivering high-quality semiconductor solutions. You have: Bachelors Degree in Electrical Engineering, Computer Engineering, or a related field (Masters preferred) 3+ years of experience in physical backend design for ICs. Complex chip designs through all stages of physical implementation Experience with tape-out of designs for advanced nodes is highly desirable Strong knowledge of physical design concepts, including place and route (PnR), clock tree synthesis (CTS), static timing analysis (STA) and power grid design Experience with physical verification tools like Cadence Pegasus or Mentor Calibre Familiarity with parasitic extraction tools (e.g., StarRC, Quantus, Calibre xRC) Scripting skills in Python, Tcl, Perl, or Shell for automation Required ToolsCadence Innovus, Cadence Quantus, Cadence Tempus, Cadence Pegasus suite It would be nice if you also had: Experience with advanced process nodes (e.g., 7nm and below) Knowledge of low-power design techniques, such as multi-Vt, multi-Vdd, or clock gating Familiarity with DFT concepts and tools, Chip packaging and thermal analysis considerations, FinFET technology and 3D IC design methodologies Perform floorplanning, partitioning, and optimization to achieve area, power, and performance targets. Execute automated place and route (PnR) using industry-standard tools to generate physical layouts. Implement clock tree synthesis (CTS), ensuring low skew and efficient clock distribution. Conduct static timing analysis (STA) to verify timing closure and ensure the design meets performance requirements. Perform power analysis, including IR drop and electromigration (EM) checks, to optimize power distribution networks. Conduct physical verification tasks, including design rule checks (DRC) and layout vs. schematic (LVS) checks, to ensure manufacturability and compliance with foundry standards. Collaborate with design, verification, and DFT teams to resolve physical design challenges and improve chip performance. Work closely with foundry teams to address process technology issues and implement best practices.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 2-4 yrs experience in Physical Design and timing signoff for high speed cores. Should have good exposure to high frequency design convergence for physical design with PPA targets and PDN methodology. Masters/Bachelors Degree in Electrical/Electronics science engineering with at least 7+ years of experience in IC design . Experience in leading block level or chip level Physical Design, STA and PDN activities. Work independently in the areas of RTL to GDSII implementation. Ability to collaborate and resolve issues wrt constraints validation, verification, STA, Physical design, etc. Knowledge of low power flow (power gating, multi-Vt flow, power supply management etc.) Circuit level comprehension of time critical paths in the design Understanding of deep sub-micron design problems and solutions (leakage power, signal integrity, DFM etc.) Tcl/Perl scripting Willing to handle technical deliveries with a small team of engineers. Strong problem-solving skills.

External Job Title Engineer - Third Party, NDT O&I Offshore Blades * Describe the Department NDT Department is part of Manufacturing Launch and Execution under PE Blades o organization. This department is responsible for ensuring NDT Evaluation and Quality of Towers and Blades which is produced in various factories. * Responsibilities • Zero Errors and Customer complaints. • Follow agreed NDT Process flow with zero deviation. • Create/Update NC for all deviations, track & close NC as per agreed SLA. • Train the Evaluators on new Blade model and get them certified. • Initiate QIP / SIP • Conduct Weekly Meetings with factory. • Participation in CIM Case Evaluation. • Active participation in Weekly meeting with Stake holders. • Performing TPR as per Process Flow. • Participate in Internal / External Audit. • Provide input for PII Revisions * Qualifications Bachelor's in Engineering in any of the following disciplines - Mechanical / Manufacturing / Production / Industrial/Electrical Or any other Equivalent engineering degree. Experience: 4 to 8 years of working in... Heavy Engineering industries, Oil & Gas, Wind, Automobile, Aeronautical Industries and CADD Services / Consultancy. Minimum 1 year of hands-on experience in NDT (UT and VT) for Bachelor's in EngineeringNDT UT Level 2 certified - ASNT / PCN / Equivalent * Competencies Required good knowledge on Blades manufacturing process Ability to setup & use NDT (UT) equipment's and relevant analysis softwarePerform Hand & Machine UT Scan Proficient in Microsoft Office for reporting day to day developments Ability to work under pressure & get things done with quality Ability in being a good team player. Possess good analytical skills with methodological approach Fluent in English (Oral & Written) Contact me @ 73589 51352 for interview schedule.

Responsibilities: * Conduct mechanical inspections using NDT methods. * Ensure compliance with QC engineering standards. * Perform UT, RT, PT, VT, MPT, painting, and LPT tests. * Collaborate on quality assurance initiatives. Travel allowance Accidental insurance

Perform inspections using UT, MPI, DI/LPT, RT, and VT techniques as per project and code requirements. Select appropriate NDT methods based on material, defect type, and testing environment. Ensure proper calibration and function

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. Additional 7-14 yrs experience in Physical Design and timing signoff for high speed cores. Should have good exposure to high frequency design convergence for physical design with PPA targets and PDN methodology. Masters/Bachelors Degree in Electrical/Electronics science engineering with at least 7+ years of experience in IC design. Experience in leading block level or chip level Physical Design, STA and PDN activities. Work independently in the areas of RTL to GDSII implementation. Ability to collaborate and resolve issues wrt constraints validation, verification, STA, Physical design, etc. Knowledge of low power flow (power gating, multi-Vt flow, power supply management etc.) Circuit level comprehension of time critical paths in the design Understanding of deep sub-micron design problems and solutions (leakage power, signal integrity, DFM etc.) Tcl/Perl scripting Willing to handle technical deliveries with a small team of engineers. Strong problem-solving skills.

Planning and Co-ordinating with execution and client Report preparation and closing from client Inspection IMIR preparation

Experienced and innovative Lead Engineer - Power lead the design, implementation, testing, and commissioning of protection and control systems projects. Develop testing and commissioning plans for MV/HV systems. Client Management

Dear all, Greeting from Manpower Group Services.... We are hiring NDT ENGINEER for one of leading Wind turbine company Designation: NDT Engineer No. of positions:15 Location: Chennai-Pallavaram Budget: 10LPA-11 LPA Qualification: BE ANY Transport &Food-Yes External Job Title Engineer - Third Party, NDT O&I Offshore Blades * Describe the Department NDT Department is part of Manufacturing Launch and Execution under PE Blades o organization. This department is responsible for ensuring NDT Evaluation and Quality of Towers and Blades which is produced in various factories. * Responsibilities Adhere On time delivery as per SLA. • Zero Errors and Customer complaints. • Follow agreed NDT Process flow with zero deviation. • Create/Update NC for all deviations, track & close NC as per agreed SLA. • Train the Evaluators on new Blade model and get them certified. • Initiate QIP / SIP • Conduct Weekly Meetings with factory. • Participation in CIM Case Evaluation. • Active participation in Weekly meeting with Stake holders. • Performing TPR as per Process Flow. • Participate in Internal / External Audit. • Provide input for PII Revisions * Qualifications Bachelor's in Engineering in any of the following disciplines - Mechanical / Manufacturing / Production / Industrial/Electrical Or any other Equivalent engineering degree. Experience: 4 to 8 years of working in... Heavy Engineering industries, Oil & Gas, Wind, Automobile, Aeronautical Industries and CADD Services / Consultancy. Minimum 1 year of hands-on experience in NDT (UT and VT) for Bachelor's in Engineering NDT UT Level 2 certified - ASNT / PCN / Equivalent * Competencies Required good knowledge on Blades manufacturing process Ability to setup & use NDT (UT) equipment's and relevant analysis software Perform Hand & Machine UT Scan Proficient in Microsoft Office for reporting day to day developments Ability to work under pressure & get things done with quality Ability in being a good team player. Possess good analytical skills with methodological approach Fluent in English (Oral & Written) interested candidate can send resume@m.venkatesh@manpower.co.in Regards, Venkatesh.M Manpower Group -HR TEAM

Hello talented techie! We're looking for dedicated individuals with the skills and vision to build a better tomorrow. Join our R&D team, develop your skills on the job and work. We know that the only way a business thrive is if our people are growing. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you? We are looking for Customer Support Engineer ! You'll make a difference by: Responsible for reproducing, troubleshooting Customer Problem Statements on SIMATIC DCS systems (PCS 7 & PCS neo) The work involves Handling Escalations and Support on SIMATIC DCS systems (PCS 7 & PCS neo) Set up the test environments in Lab for different types of Customer Problem Statements, which involves configuration of the products under test. In Addition, responsible for usage of diagnostic tools and related applications for troubleshooting. Responsible for writing bug reports and verifying them after fixes. Involves in interacting with Business Partners and Customers for technical clarifications. Involves Technical content preparation for trainings, Online Workshops, Virtual Class-room trainings. Conduct training sessions for our products as needed. Your unique perspectives and contributions will be vital in achieving our organization's goals and vision. You'd describe yourself as: Graduate BE - Electrical, Electronics & Communications or Instrumentation Engineering with 5 to 10 years of total experience in Industrial Automation. Worked on PCS7 & PCS neo Worked on Redundant PLCs / Failsafe configurations. Worked on SCADA HMI (in-depth knowledge) Hands on working exp on continuous and sequential control logics. Hands on working exp on field devices. Knowledge of communication interfaces like MPI, Profibus, Profinet, Ethernet, TCP/IP. Knowledge on Product Testing Commissioning experience of process plants (Batch applications) is additional advantage. Create a better #TomorrowWithUs! This role, based in Bangalore, is an individual contributor position. You may be required to visit other locations within India and internationally. In return, you'll have the opportunity to work with teams shaping the future. At Siemens, we are a collection of over 312,000 minds building the future, one day at a time, worldwide. We are dedicated to equality and welcome applications that reflect the diversity of the communities we serve. All employment decisions at Siemens are based on qualifications, merit, and business need. Bring your curiosity and imagination, and help us shape tomorrow Find out more about Siemens careers at:

Role & responsibilities Apply upgrades, patches, and updates to the OpenVMS Servers to maintain the OpenVMS OS and the layered products that make up the OpenVMS Servers. We also create, modify, and disable OpenVMS user accounts as requested and manage/monitor disk space, queues (printer and batch) and backups as required. We also support the 15 emulated OpenVMS Servers running on 9 Vere Technologies virtual servers, supporting multiple applications (CAPP+ being the most used application) for 13 different sites. Apply upgrades, updates, and patches to the VT Software. Create, modify, and disable OpenVMS user accounts as requested and manage/monitor disk space, queues (printer and batch) and backups as required. https://career.infosys.com/jobdesc?jobReferenceCode=INFSYS-EXTERNAL-211548 Preferred candidate profile

Exp. in designing Electrical Current & Voltage Transformers. Strong understanding of Standards applicable and required for designing of CT & VT. Sound knowledge of Auto CAD/ Solid edge/ Catia/ NX. Excellent problem solving skills.