40 Spectrum Analyzer Jobs

As a Microwave NMS Engineer at Computronics Systems (India) Private Limited in Bengaluru, you will be responsible for tasks related to circuit design, microwave engineering, RF design, spectrum analysis, and network analysis. You will play a key role in ensuring the efficiency and effectiveness of the network management systems. To excel in this role, you should possess strong Circuit Design and RF Design skills, along with expertise in Microwave Engineering. Your proficiency in Spectrum Analyzer and Network Analyzer skills will be crucial for analyzing and optimizing network performance. Previous experience in working with network management systems will be beneficial in fulfilling the responsibilities of this position. Your problem-solving and analytical skills will be put to the test as you troubleshoot and resolve issues related to microwave technologies. A Bachelor's degree in Electrical Engineering or a related field is required for this role, along with relevant certifications in microwave or RF technologies. If you are passionate about working with cutting-edge technologies and driving innovation in the telecommunications industry, this role at Computronics Systems (India) Private Limited presents an exciting opportunity to contribute to the company's mission of enhancing the way the world works and lives.,

You are an Electronics Hardware Engineer being sought after to join the team at Amara Raja Design Alpha Pvt Ltd in Kochi, Infopark. In this role, you will be responsible for handling challenging design tasks with a focus on electronics and embedded systems. Your primary requirements for this position include having 2 to 3 years of experience in Electronics Design, Hardware Testing, and PCB Design. You should possess practical experience in working on intricate micro-controller and microprocessor or SoC-based designs. Proficiency in Schematic design, BOM utilizing Cadence software, and hands-on involvement in board bring-up are essential. Experience with tools such as Oscilloscope, Spectrum analyzer, logic analyzer, and protocol analyzers is a must. Your role will also involve designing circuits involving ADC, Sensors, signal conditioning, as well as hardware for various communication protocols like BLE, WIFI, UART, RS232, SPI, I2C, I2S, USB3.0, and ensuring regulatory compliance. Additionally, you should have strong people management and communication skills to effectively collaborate within the team. A preferred qualification for this position is a B.Tech degree in Electronics or Electronics and Communication. The job location is in Kochi with potential travel to client sites abroad. If you meet the above requirements and are excited about this opportunity, please forward your resume to oshian@designalpha.in with the subject line: CV_Engineer- Project Lead: Electronics Hardware.,

Marvell is a leading semiconductor company that provides innovative technology solutions across various industries such as enterprise, cloud, AI, automotive, and carrier architectures. By joining Marvell, you will have the opportunity to impact individual lives, shape industries, and contribute to the transformative potential of the future. If you are passionate about purposeful and enduring innovation and seek a place to thrive, learn, and lead, Marvell is the place for you. As a member of the Hardware Board Design Team at Marvell, you will play a crucial role in designing, developing, and maintaining various components during the design phases. You will have the opportunity to work on next-generation SSD/HDD and Compute-based SoC products, platforms, and infrastructure. Key Responsibilities: - Develop board and system level design specifications based on technical marketing requirements. - Define and architect the board and perform schematic capture. - Collaborate with silicon design, package team, and board CAD team for package ball assignments, board routing, and layer count optimization. - Conduct signal and power integrity simulations on high-speed serial interfaces. - Provide PCB layout constraints, stack-up details, and document board design guidelines. - Work closely with design engineers, firmware engineers, and software engineers for functional verification and debug activities. - Validate board design functionality and qualify high-speed interfaces based on SI/PI simulation results. - Offer reference platform design characterization and design guideline documentation for customers. - Review customer designs with FAEs and board layout group. - Collaborate with FAEs on customer issues, lead root cause analysis, and corrective actions for hardware design issues. Qualifications: - Bachelor's or Master's degree in Electrical, Electronics, or ETC/E&TC. - Bachelor's degree with 5-10 years of experience or Master's degree with 2-5 years of experience in designing complex & dense boards for the client market using OrCAD tool. - Direct experience with DDR3/4, PCIe Gen3/4, SATA3, SPI, I2C interface design. - Hands-on experience with bus and network analyzers, high-speed oscilloscopes, TDR, and spectrum analyzers. - Expertise in 3D/2D EM simulation tools and transmission line theory. - Strong interpersonal, teamwork, verbal, and written communication skills. - Proficient in debug, analysis, problem-solving, and leading root cause analysis across teams. - Ability to work with a sense of urgency, accountability, and multitask in a fast-paced environment. At Marvell, we offer competitive compensation and great benefits within a work culture that promotes collaboration, transparency, and inclusivity. We are committed to providing our employees with the necessary tools and resources to succeed, grow, and develop with us. Learn more about working at Marvell by visiting our Careers page.,

You will be a member of the FPGA development team designing and developing complex FPGAs for use in state-of-the-art embedded systems. As an FPGA Senior Design Engineer / Module Lead, you will be involved in requirements gathering, architecture and detailed design of FPGAs, coding, code walk, development of verification and validation plans, documentation of design, verification / validation, user guides, etc., technical reviews, maintaining Quality standards as per the Project Quality Guidelines and mentoring team members. Experience in architecture design, development and verification of complex FPGAs is crucial for this role. You should possess excellent RTL coding skills in Verilog/VHDL and be familiar with AMD (Xilinx) / Intel (Altera) / Lattice / Microchip FPGAs. Additionally, familiarity with AMD (Xilinx) ISE, Vivado / Intel (Altera) Quartus / Lattice Diamond / Microchip Libero FPGA tools is required. Experience in Functional verification using ModelSim and familiarity with high-speed interfaces such as PCIe, SPI-4.2, SFI-4.2, Gigabit Ethernet, UTOPIA, POS PHY, USB2/3, DDR3, SPI, UART, I2C, Aurora etc. is necessary. Exposure to FPGA Static Timing Analysis and knowledge of scripting languages like TCL and Python are desired skills. You should also have knowledge of Interfacing FPGA to ADC, DACs and experience in FPGA on-chip debugging with Chipscope/ Signaltap. Test bench development in VHDL / Verilog / System Verilog and familiarity with hardware test equipment like High-Speed DSO, Logic Analyzer, Spectrum Analyzer, Network Analyzers, Traffic Generators, etc. are important aspects of this role. Understanding of high-speed Microprocessors / Micro-controllers, L2/L3 switching, TCP/IP, and other networking protocols is beneficial. Knowledge of Hardware Schematics, Quality Process, and Configuration Management tools is also required for this position. Good oral and written communication skills, strong organizational, presentation, and motivational skills are essential qualities. The ideal candidate should have 3 to 5 years of experience in FPGA Development and hold a BE / B.Tech / M.Tech degree in Electronics & Communication Engineering.,

You are seeking an Embedded Software Senior Engineer who is proficient in C/C++ Programming Language and Linux. Your responsibilities will include understanding requirements, designing, developing, unit testing, and debugging Embedded Software Real-time applications, Device Drivers, Bootloader, porting, and Linux kernel. You will also be responsible for documenting Requirement Specification and Design, as well as leading a team of 3 or 4 engineers. Additionally, you will need to provide effort estimation, planning, and customer interaction. To excel in this role, you should have 2 to 10 years of experience in Embedded Software with a strong foundation in C. Expertise in the Linux kernel and Linux kernel device drivers such as PCIe, display interface (e.g., HDMI, DP), v4l2, and DRM is required. Knowledge of GPU, using APIs or CUDA programming, is also essential. Hands-on experience with embedded Linux building, Uboot configuration, kernel compilation, Linux start-up sequencing, file-systems, and debugging kernel messages for cross platforms is crucial. You should be familiar with development using Host-Target tool chains for embedded platforms and have experience in system-level debugging, reverse engineering, Linux Internals, and Protocol level knowledge of interfaces. Proficiency in debugging tools like GDB, KGDB, JTAG, ADB, as well as familiarity with tools like Logic Analyzer, DSO/CRO, and Spectrum Analyzer, will be advantageous. Sound knowledge of SW development tools such as Git, CVS, Confluence, JIRA, bit-bucket, and SourceTree is a must. A passion for learning new technologies, methodologies, strategies, and processes is desired, along with the ability to work in an aggressive, high-pressure environment. Excellent written and verbal communication skills, self-starting attitude, problem-solving mentality, and creativity are essential. You should also be proficient in documentation and able to prepare specification and design documents from requirements. Technical ownership of software driver modules is expected. Desired skills include independent leadership of a module with 3 or 4 engineers, knowledge of quality processes like CMMi and Agile Scrum, and experience with open-source software packages. Contribution to the open-source Linux kernel codebase and close cooperation with other leaders and project managers would be beneficial for this role.,

As a Hardware Engineer, you will play a key role in the design, debugging, and validation of cutting-edge hardware solutions for Nokias Optical Networking products. Your work will directly contribute to the development of high-performance systems that power global communications infrastructure. You will collaborate with cross-functional teams including system architects, software developers, and test engineers to bring innovative hardware designs to life. From schematic design and component selection to design analysis and lab testing, youll be involved in the full product development lifecycle. Youll have the freedom to explore new ideas and grow your technical and professional skills. Required Skills: Experience in designing boards with Microprocessors, Microcontrollers, FPGAs and CPLDs Working knowledge of high-speed interfaces like PAM4, PCIe, DRR4, SATA, USB, SGMII etc. Knowledge of various memories (DDR, NAND, NOR etc) Experience in designing boards in telecom domain Knowledge of SI and PI concepts, Timing concepts Experience with Concept HDL schematic entry Hands-on experience with lab equipment like high speed oscilloscope, signal source analyzer, spectrum analyzer, logic analyzer, bode analyzer etc. Good communication and documentation skills Role & Responsibilities: Conduct feasibility analysis during the architecture phase. Design hardware that meets requirements. Perform component selection, schematic entry, BoM release, support layout engineers, and support the manufacturing team during prototyping. Conduct board bring-up, functional testing, and support cross-functional teams during system testing and debugging issues. Debug field issues of released products.

Key Responsibilities To Analyze domain specific technical or low level requirement and modification as per end customer or system requirement. Perform software testing including unit, functional and system level requirement including manual and automated Write firmware for the specific System module. Write integration Code and make push requests to the git repository. Performs code peer-review following coding guidelines and static code analysis Troubleshoots software problems of limited difficulty. Documenting technical deliverables like software specifications, design document, code commenting, test cases and test report, - Release note etc. throughout the project life cycle. Follow defined process for software Development life cycle Provide technical support to Team and contribute towards their Growth Generate Reusable Code that can be contributed towards Code bank. Get hands on with new Technologies and Skill to keep yourself updated. Expertise Skills Excellent programming skills in C/C++ Experience 4+ years Working experience in bare metal, RTOS, and device driver development Linux board bring up and kernel level programming skills, device driver development End to end design and architecture level experience in Embedded and IoT based products Porting open source porting experience. Knowledge of ARM based various processors and microcontrollers Excellent analytical and problem-solving skills Excellent debugging skills and hands on with the coding Object oriented fundamentals and design Reading schematics, datasheets, technical reference manual and Silicon revision sheets Using tools like Logic Analyzer, DSO/CRO, Spectrum Analyzer. Used Confluence, JIRA, GIT, SVN, bit-bucket, etc. Experience of team leadership and/or project management in multi-cultural multi-disciplined team Good To Have Understanding of Android architecture and elements like AIDL, Binder, Lifecycle, System Services, Android Framework, and AOSP Knowledge of Cloud Platforms like AWS, AZURE or Google cloud Power Management for Low Power devices

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. BDC Post Silicon Engineering group has an opening for a Digital Bench characterization Engineer. This group develops Test solutions for Design verification of Highly integrated SOCs (System on Chip) designed by Qualcomm. We work with Design, System, Program Management, Yield, Reliability and Manufacturing teams to Test, support and commercialize Qualcomms products. As part of the Post Silicon Engineering group, you will be responsible for developing Test strategy & executing Bench characterization for leading edge LPDDR & PCDDR Subsystem components (DRAM, DRAM Controller, DRAM PHY, IOs, PLL/DLL, clocking architecture, Delay circuits, Power Distribution Network) and High-Speed IO interfaces (PCIe, USB2/3, Display Port, HDMI, MIPI-CSI/DSI, UFS & PLL). You will drive first Silicon debug, qualify semiconductor fabrication process, evaluate parametric performance of DDR & High-Speed IO IPs and perform failure analysis to root-cause a design problem. You with be working with IC design engineering, system engineering and Hardware applications engineering teams across the globe in a time critical environment. Education Requirements MTech, BTech or Equivalent in Electronics or Electrical Engineering with 1-3 years of related work experience Skills/Experience: Solid understanding of Electronics engineering fundamentals, DDR & High-Speed IO circuit analysis techniques and Semiconductor manufacturing process, Good understanding of Test and characterization methodology of DDR and High-Speed IO interfaces In-depth understanding of Mobile & PC DDR 2/3/4 protocol, timing diagrams, HSIO IPs PHY level understanding and Electrical parametric compliance specifications (eye diagram, differential signaling, jitter analysis, Receiver-Jitter-Tolerance, signal integrity, transmission line considerations, de-embedding). Hands-on experience using Bench instruments such as oscilloscopes, J-BERT, network / spectrum analyzers, signal generators and Logic analyzers is a must. Solid software skills for writing and debugging Test code using C, C# or Python. LabView knowledge is a plus. Using CAD software such as Mentor Graphics DA or Cadence Allegro is a plus. Ability to work effectively in a fast-paced environment with strong verbal and written communication skills. Keywords DDR, High-Speed IO, Electrical Spec compliance, Eye Diagram, Jitter, C, C#, Python, LabVIEW Applicants Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Responsibilities Perform RF design development and testing at both board and system level meeting 3GPP, customer desense/coexistence, and major EMC regulatory+ US carrier OTA approval requirements. Work with USI functional lead to address RF issues and perform follow-up debugging for resolution. Skills & Technology Proficient in RF matching tuning, RF bring up, calibration, validation testing for smart phone type products, particularly with 5G NR ENDC, Wi-Fi6, BT, GNSS, NFCetc. Experienced in 5G sub-6 wireless test equipment and their automation tools such as ATS with Anritsu MT8000/MT8820C/MT8870, TA/RA with Keysight UXM. Knowledge of general RF equipment operation for Network Analyzer, Spectrum Analyzer, Signal Generator etc. and practical usage of schematic and layout design tools such as Allegro and OrCAD. Familiar with QCT 5G platform and QDART development tool with hands on experience for single band/ENDC/SA calibration and connection testing verification. Qualifications Bachelor of Science degree in Engineering or a related field, or equivalent practical experience. Strong command of English, both written and spoken. Independent, adaptable, capable of multitasking in development.

Life on the team Its an exciting opportunity for a technical role in Computacenters dynamic and rapidly expanding Network team. You will bring your IT experiences and deliver the quality of services to our customers across the globe and will help us to shape the team. Youll get to work with some of the most talented and passionate people in the business and get exposure to leading edge technologies which will enable you to advance your skills. Once you started journey in Computacenter, you’ll get to know the work lifestyle and culture of Computacenter in no time. What you’ll do Remote management - Perform a range of technical work activities remotely to meet business and customer requirements. You will be working on industry leading technology and products including Cisco, HP, Aruba, etc. You will be working on monitoring tools including Spectrum, NNMi, Solarwinds, HP IMC. Ticketing tools like Service-Now. Provide quality of service to our customers for the ticket assigned to you. Communicate effectively to the customers on the ticket you are working to avoid escalations and improve customer satisfaction levels. You will be working with dynamic team, who supports our customers 24/7. Maintain SLA performance targets. Understand and adhere to compliance policies and procedures. Keep skills up to date with IT industry standards as appropriate to the role/contract. What you’ll need 2+ years industry experience in a network operations/support environment. • Cisco CCNA or equivalent. • Technical ability to provide 1st level network monitoring. • Technical ability to provide basic fault finding and fault escalation. • Monitoring ticket queue and resolving issues within defined SLA • Working with global team to resolve issues. • Monitoring connectivity and troubleshooting • Good understanding of incident management activities. • Good ability to follow and documented operational processes. • Strong experience with ticket management and change request management systems. • Strong experience with network monitoring / management tools/ analysis tools. • Experience with liaising with carriers and vendors for faults; and • Good communications and interpersonal skills. • A self-starter able to work independently but comfortable working in a team environment. • Good analytical and problem-solving skills.

1. Define/complete test plan and validationof of RF performance for products, debug/fix issue and track status 2. Test data analysis and generate report according to request 3. Coordinate projects technical issue with clients, be able to summarize and provide clear problem statements with data and details. 4. Draft testing SOP, RF technical standard and regulation research.

We are hiring for US based MNC and job location is Bangalore Interested candidates can directly share CV at pratibha@myndsol.com mentioning the job title in the subject line. Looking for immediate joiners Job Title - Technical Support Application Engineer The role is part of the KeysightCare Customer Support Organization, delivering post-sales customer support directly to key customers and strategic partners. The KeysightCare Technical Support Application Engineer is a key player in the customer value-chain and you are critical in supporting our customers technical problems. We are looking for an experienced RF&W Component Test application/product specialist engineer who can demonstrate a broad knowledge of instrumentation, applications and technologies. You will develop to get the go to knowledge expert within KeysightCare and will engage with customer and partners across EMEAI to deliver post-sales customer support. You will be a key contributor to the KeysightCare EMEAI regional strategy and will work across KeysightCare to lead projects requiring coordination with other functions, customers, third parties. The successful candidate must demonstrate a real passion for customer success and enjoy taking on complex technical challenges working in a customer facing deep technical environment. Responsibilities include: - Engage with customers, sales and/or service representatives across EMEAI to deliver post-sales customer support, solving technical questions of varied scope and complexity. - Manage day to day operations and workload expectations autonomously. - Share technical expertise across the EMEAI team and write deep technical articles for the customer knowledgebase - Close cooperation with the Keysight product and software and solution centres. The technical support application engineer is the technical interface between the customers and the Keysight Worldwide support team. - Take proactive actions while interacting with customers in terms of solving current questions or addressing potential future needs. - Deliver Getting Started and Start Up Assistance to customers remote and onsite. - Develop into the Component Test knowledge expert within KeysightCare for products and solutions Job Qualifications: - Bachelor and/or Masters degree in Electronic and Communication Engineering. - Typically, 5-8 years relevant experience working in Vector Network Analysis, Impedance Analysis and DC Device Parameter Analysis. - Is familiar with calibration techniques, like SOLT, TRL, De-embedding in coax, waveguide and on-wafer. - Brings experience of testing passive and active components from filters to high power amplifier or mixers with VNAs. - Solid understanding of modern VNA measurements beyond S-Parameters like, gain compression, IMD, Noise Figure. - Requires in-depth technical knowledge and experience in job and ability to work independently. Solid understanding of RF/W fundamentals with practical experience using RF/W test equipment. - Solid understanding of the generation, demodulation and analysis of digital communication signals. - Advanced instrument programming skills with SCPI and instrument drivers with C++, C#, VEE, LabView, Python, MATLAB or VB, is an advantage. - Strong organisational skills, ability to multi-task, prioritise and work well under pressure. - A strong level of English written and Oral is essential for this role. - Extra languages are an advantage. - Understands the local market, customer needs and dynamics, strong communicator who can positively interact with customers. Interested candidates can directly share CV at pratibha@myndsol.com mentioning the job title in the subject line.

As an innovative telecommunication company, we are currently looking for a RF Product Engineer to be a valuable addition to our Product engineering team. Your role will involve various responsibilities including the transition of products from development to production, providing support and training to subcontractors" production lines, leading and implementing DFXs methods, offering ECO and Zero Series SPC support, preparing and escorting Z.S & R.U documentation for SMT and test stations, managing yield responsibility, qualifying follow-ups, and driving corrective and preventative actions. You will also be required to make periodic visits to production facilities. To qualify for this position, you must have a BSC in Electrical Engineering and possess solid knowledge and experience in RF, including NF, IP3, RL, etc. Additionally, you should have expertise in antenna and RF passive components, be proficient in operating RF Test Equipment such as Spectrum Analyzer, Signal Generator, Power Meter, Network Analyzer, and have experience in writing technical documents in English. Excellent communication skills in verbal and written English are a must, along with the ability to work independently and creatively. Ideally, you should have experience in providing technical support for the introduction of new products into manufacturing, collaborating with Manufacturing, Quality, Process Engineering, and Maintenance teams on product-related issues, resolving technical challenges in production, understanding engineering processes and PDM software, and being a team player with strong technical and communication skills. If you are a qualified and driven RF Product Engineer with a passion for innovation and a desire to contribute to a dynamic team, we encourage you to apply for this exciting opportunity.,

Role & responsibilities 4G and 5G strong knowledge in analysis and rework of mobile PCBA. Need strong knowledge in Schematics circuit traceability. BGA level analysis and rework knowledge must need. Need strong knowledge in SMT failure analysis like MBT,CAL,RFT. Spectrum analyzer knowledge. Voltage signal traceability knowledge. Must be well strong in mobile motherboard rework (Glue and Non Glue) is preferred examination will be available while interview based on practical skills only will proceed further. Good knowledge in SMT test Failure analysis is preferred (Download and CAL failure)

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: WLAN RF Front-end design, validation and debug. Skills/: - 4-6 years of experience in RF Front-end design, tuning and debug preferably in WiFi domain.- Strong RF board design and debug experience.- Experience in using EDA tools like ADS, HFSS , AWR for RF design and Layout simulation.- Must be hands on bench level debug and testing.- Experience with lab equipment’s including Spectrum analyzer, Network analyzer, Signal generator, etc- Experience in using the circuit design tools(Cadence/Mentor) and Layout tools.- Experience with EMI/EMC testing - System level architecture design is desirable. - Candidates must possess good oral and written communication skills. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 4-6 years of experience Bachelors/Masters in Engineering

Knowledge on RF Test Equipments (Spectrum, VNA, Sig Gen, Powermete Power supplies etc.. Knowledge an MS office Knowledge on RF and Microwave components and module Testing Knowledge on EMIEMC Testing Knowledge on Screening and the activities

Design and develop RF and analog circuits such as LNAs, mixers, power amplifiers, VCOs, PLLs, and ADC/DACs. Perform system-level analysis to optimize RF performance parameters like gain, noise figure, linearity, and phase noise. Conduct circuit simulations using tools like Cadence Spectre, ADS, HFSS, Momentum, and EMX. Collaborate with layout engineers to ensure optimal floorplanning, parasitic extraction, and RF routing. Conduct post-layout verification and EM simulations for high-frequency designs. Participate in lab validation and characterization of fabricated ICs, debugging issues, and improving performance. Work closely with system architects and digital design teams for mixed-signal integration. Support product engineering and test development for production ramp-up. Qualifications: 2 to 5 years of experience in RF/analog IC design. Strong understanding of RF circuit design principles, including impedance matching, S-parameters, and nonlinearity analysis. Hands-on experience with Cadence Virtuoso, Spectre RF, ADS, HFSS, or similar EDA tools. Knowledge of CMOS/BiCMOS process technologies and parasitic-aware design methodologies. Experience in EM simulation and modeling of on-chip passives (inductors, transmission lines, baluns). Familiarity with RF lab equipment (network analyzers, spectrum analyzers, signal generators). Strong problem-solving skills and ability to work in a fast-paced startup environment. Excellent communication and teamwork skills.

As a Hardware Engineer, you will play a key role in the design, debugging, and validation of cutting-edge hardware solutions for Nokias Optical Networking products. Your work will directly contribute to the development of high-performance systems that power global communications infrastructure. In an increasingly connected world, the pandemic has highlighted just how essential telecom networks are to keeping society running.The Network Infrastructuregroup is at the heart of a revolution to connectivity, pushing the boundaries to deliver more and faster network capacity to people worldwide through our ambition, innovation, and technical expertise Join Optical Networks division, where innovation meets scale in the AI-driven data center era. With the recent acquisition of Infinera, weve united two industry leaders to create an optical networking powerhousecombining cutting-edge technology with proven leadership to redefine the future of connectivity. Infinera is now part of the Nokia Corporation and its subsidiaries. When you apply, the information you share will be handled with care and used only for recruitment purposes within the group. Youll have the freedom to explore new ideas and grow your technical and professional skills. Experience in designing boards with Microprocessors, Microcontrollers, FPGAs and CPLDs Working knowledge of high-speed interfaces like PAM4, PCIe, DRR4, SATA, USB, SGMII etc. Knowledge of various memories (DDR, NAND, NOR etc) Experience in designing boards in telecom domain Knowledge of SI and PI concepts, Timing concepts Experience with Concept HDL schematic entry Hands-on experience with lab equipment like high speed oscilloscope, signal source analyzer, spectrum analyzer, logic analyzer, bode analyzer etc. Good communication and documentation skills Conduct feasibility analysis during the architecture phase. Design hardware that meets requirements. Perform component selection, schematic entry, BoM release, support layout engineers, and support the manufacturing team during prototyping. Conduct board bring-up, functional testing, and support cross-functional teams during system testing and debugging issues. Debug field issues of released products.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. Title: PMIC Reference Board Design Engineer Location: Bangalore, India : The QCT PMIC Systems group has an opening for a PMIC Reference Board Design Engineer. This group owns PMIC PCB design guidelines for Qualcomm chipset-based phone design. This includes design and optimization of PMIC PCB Floorplan, Schematic, Layout, phone thermal solution and eBOM selection for test platforms and customer reference design and evaluation kits. Qualcomm PMIC hardware design typically consists of modules such as switch-mode power supplies and linear voltage regulators for a variety of cores and peripherals, battery chargers, low noise clocks, ADCs, user interfaces such as display, camera flash and haptics, Power-on and Reset hardware. Responsibilities: ** NOT A LAYOUT POSITION** Job responsibilities for this position include design of Qualcomm PMIC Reference Board design and evaluation kits and working closely with PMIC IC designers and Test HW platform teams for optimizing performance and cost on test hardware platforms. The engineer will develop PMIC PCB reference design consisting of schematics, PCB layout, eBOM selection, layout guidelines and specs (by working closely with CAD engineer) based on interaction with chipset architecture, chip design and test teams. Experience in Mentor PADs Logic and PADs Layout, DxDesigner and Expedition is desirable but not essential. The engineer is required to perform the required board level simulations (based on Power Integrity and Signal Integrity tools) to review and sign off on hardware designs developed by various test teams. The engineer will be responsible for characterizing and publishing performance and cost optimized reference BOM lists (power inductors, capacitors, third party components etc) based on component characterization and BOM reduction and optimization tests in lab. Skills/Experience: ** NOT A LAYOUT POSITION** Understanding and ability to apply electrical engineering concepts and circuit solving skills. Able to work with common lab test equipments (oscilloscope, spectrum analyzer, logic analyzer, network and impedance analyzer, etc.). Experience in Power Management (SMPS, LDO, battery chargers, Clocks, ADC) PCB design and component selection including CAD interface. Experience in high layer count multilayer boards (6/8/10 layers) preferred. Good understanding of common Signal and Power Integrity issues on test hardware and ability to identify and provide alternate solutions using Signal and Power Integrity simulators (eg. powerSI, SIWave, Ansys) is also a plus. It is important the candidate has ability to communicate technical understandings and project status clearly. Also important is the ability to organize effectively and document work thoroughly and follow required procedures and methodologies . Ability to contribute seamlessly as a member of the reference HW design team across multiple chipsets. Education: RequiredB.E/ M.Tech /MS with 1 to 7 years of relevant experience. Keywords PMIC Reference Board Design, Power Electronics, PCB Design, Power Delivery, Power Integrity

Job Summary: To lead end-to-end RF system design validation and troubleshooting for cutting-edge wireless and defense solutions. This role is perfect for experienced RF engineers ready to take ownership of complete RF subsystems from lab setup to field deployment. Key Responsibilities: Define and validate RF system-level specifications aligned with project goals. Lead testing, debugging, and validation of integrated RF subsystems. Develop and execute test plans, validation procedures, and technical protocols. Perform root cause analysis on RF signal issues and performance deviations. Collaborate with cross-functional teams for system integration and compliance testing. Create detailed technical documentation: test logs, integration manuals, design reviews, and compliance reports. Support field trials and optimize system performance under real-world conditions. Mentor junior engineers and review system setups for standard compliance.

Role: RF Design Engineer Location: Hyderabad Experiences : 5 to 8 yrs Role & responsibilities Should have a minimum 5 to max 8 years experience in RF & Microwave subsystem and system design Should have hands on design & Testing experience in Solid State High Power amplifiers in VHF, UHF to Ku Band Frequency Should be able to handle independently Should be an expert in handling all RF test equipment Experience in handling QA agencies i.e CRI, RCMA, SSQAG, MSQAA, RQA etc Should handle a team of 4 members Experience in Production planning Should handle multiple tasks/ projects Experience in making documentation

Amdocs helps those who build the future to make it amazing. With our market-leading portfolio of software products and services, we unlock our customers innovative potential, empowering them to provide next-generation communication and media experiences for both the individual end user and enterprise customers. Our employees around the globe are here to accelerate service providers migration to the cloud, enable them to differentiate in the 5G era, and digitalize and automate their operations. Listed on the NASDAQ Global Select Market, Amdocs had revenue of $5.00 billion in fiscal 2024. For more information, visit www.amdocs.com In one sentence Perform network design/optimization activities under technical supervision and Exposure on iBwave tool is mandatory. What will your job look like A minimum of 5 years professional experience in the wireless industry as a RF DAS Design engineer and experienced in 5G/LTE/LTEU/ WCDMA/ CBRS technologies Degree in Telecommunications, Electronics, or Electrical engineering. Experience designing and commissioning of multi-sector, neutral host DAS using most major DAS OEMs such as Corning, CommScope, SOLiD, ADRF, JMA/TEKO (Certification is a plus) Deep Knowledge of active and passive DAS components (e.g. remote units, DAS OEM models, coaxial and fiber cable, antennas, splitters). Experience with DAS design, commissioning, CW measurement, optimization, and troubleshooting. Knowledge at completing commissioning tasks, Sweep, PIM , and Fiber testing. CW measurements. Experience with Link Budgets for multiple technologies/frequencies, calculating noise figures, and calculating intermodulation products. Experience with iBwave software (certification is a plus). Must have recent experience with DAS Design and RF Testing Extensive knowledge about the RF Walk Testing and Optimization of inbuilding DAS solutions . Successful candidate will coordinate walk test data collection and Optimization. Design/ Optimize iDAS, oDAS, small cell solutions with iBwave. Participate in solution iBwave designs and proposals as needed. Use a variety of measures to confirm system designs including test equipment, power density and power meter, spectrum analyzer, and pilot scanner RF testing, reporting, and troubleshooting. Conduct field work and measurements. Operate test equipment and run post-processing software. Mentor/Train/Manage technicians and junior engineers for field work and measurements. Perform ongoing system testing, test analysis, troubleshooting, test reports. Excellent written, verbal, and interpersonal communication skills, as well as strong strategic and analytical skills. Being a team player in the truest sense, with an ability to work with partners across different time zones. A work ethic to drive projects and tasks to finish on time, overcoming any obstacles along the way. Solid skills with Microsoft Office Software (particularly Excel, Power point). In addition, qualified Candidates with have the ability to: Deliver customer service, use great communication skills, and demonstrate ability to work well on a team. Demonstrate ability to complete iBwave designs, optimization and commissioning activities independently as projects require, while working with a sense of urgency. All you need is... Why you will love this job:

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: Firmware (FW) Engineers are responsible for developing GPU system level power and control firmware on ARM Cortex M3. Engineers are also in charge of validating/commercializing Firmware in pre-silicon (DV) and post-silicon (Emulation/Windows/Linux-Android) platforms. Primary tasks in this role include: Firmware & Spec Ownership GPU Power and Control sequences/Spec. ramp up and ownership Review and signoff software usage model with hardware engineers Firmware & Software design of hardware sequences collaborating with hardware designers Firmware source code development, verification, integration, review and maintenance Review and analyze test results, propose failure hypothesis and debug steps across pre and post silicon On Silicon prototypes to feed future feature HW/FW Architectures Pre-Sil: Support & enable test environment development, test plan and firmware validation on DV & emulation platforms Post-Sil: Support & enable test and validation on post-silicon platforms across windows and Linux-Android Primary POC for customer issues during commercialization Good understanding of System/SW level security architecture and hierarchy Work with GPU HW/SW leads to ramp up on GPU security Architecture and requirements Participate in GPU security reviews & products review for select projects Qualifications: Experience in Embedded System Design Experience with system architecture and hardware design (Verilog/SystemVerilog) with emphasis on CortexM3 Experience in C/C++ coding/debug and scripting (PERL, Python) Experience with Lauterbach embedded system debug tools Experience with FW/HW debug utilizing Logic Analyzers, Spectrum Analyzers, Oscilloscope Bachelors/Masters degree in Electrical/Electronics Engineering, Computer Science, or related field Minimum 4 years of experience in firmware development, hardware design/verification, debug and support Good understanding of SW memory management architecture Any prior work experience on Automotive projects is a plus Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. BDC Post Silicon Engineering group has an opening for a Digital Bench characterization Engineer. This group develops Test solutions for Design verification of Highly integrated SOCs (System on Chip) designed by Qualcomm. We work with Design, System, Program Management, Yield, Reliability and Manufacturing teams to Test, support and commercialize Qualcomms products. As part of the Post Silicon Engineering group, you will be responsible for developing Test strategy & executing Bench characterization for leading edge LPDDR & PCDDR Subsystem components (DRAM, DRAM Controller, DRAM PHY, IOs, PLL/DLL, clocking architecture, Delay circuits, Power Distribution Network) and High-Speed IO interfaces (PCIe, USB2/3, Display Port, HDMI, MIPI-CSI/DSI, UFS & PLL). You will drive first Silicon debug, qualify semiconductor fabrication process, evaluate parametric performance of DDR & High-Speed IO IPs and perform failure analysis to root-cause a design problem. You with be working with IC design engineering, system engineering and Hardware applications engineering teams across the globe in a time critical environment. Education MTech, BTech or Equivalent in Electronics or Electrical Engineering with 1-3 years of related work experience Skills/Experience: Solid understanding of Electronics engineering fundamentals, DDR & High-Speed IO circuit analysis techniques and Semiconductor manufacturing process, Good understanding of Test and characterization methodology of DDR and High-Speed IO interfaces In-depth understanding of Mobile & PC DDR 2/3/4 protocol, timing diagrams, HSIO IPs PHY level understanding and Electrical parametric compliance specifications (eye diagram, differential signaling, jitter analysis, Receiver-Jitter-Tolerance, signal integrity, transmission line considerations, de-embedding). Hands-on experience using Bench instruments such as oscilloscopes, J-BERT, network / spectrum analyzers, signal generators and Logic analyzers is a must. Solid software skills for writing and debugging Test code using C, C# or Python. LabView knowledge is a plus. Using CAD software such as Mentor Graphics DA or Cadence Allegro is a plus. Ability to work effectively in a fast-paced environment with strong verbal and written communication skills. Keywords DDR, High-Speed IO, Electrical Spec compliance, Eye Diagram, Jitter, C, C#, Python, LabVIEW

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Preferred Qualifications: Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 3+ years of Hardware Engineering or related work experience. 2+ years of experience with circuit design (e.g., digital, analog, RF). 2+ years of experience utilizing schematic capture and circuit simulation software. 2+ years of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc. Principal Duties and Responsibilities: Applies Hardware knowledge and experience to plan, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems. Integrates features and functionality into hardware designs in line with proposals or roadmaps. Conducts simulations and analyses of designs as well as implements designs with the best power, performance, and area. Collaborates with teams (e.g., design, verification, validation, software and systems engineering, architecture development teams, etc.) to implement new requirements and incorporate the latest test solutions in the production program to improve the yield, test time, and quality. Evaluates, characterizes, and develops the manufacturing solutions for leading edge products in processes and bring-up product to meet customer expectations and schedules. Evaluates reliability of materials, properties, and techniques and brings innovation, automation, and optimization to maximize productivity. Assists in the assessment of complex design features to identify potential flaws, compatibility issues, and/or compliance issues. Writes detailed technical documentation for Hardware projects. Level of Responsibility: Works independently with minimal supervision. Decision-making may affect work beyond immediate work group. Requires verbal and written communication skills to convey information. May require basic negotiation, influence, tact, etc. Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively.