135 Simulator Jobs

Objective: We are looking for a results-driven Product validation engineer with experience in testing and qualifying inverter, solar, and battery-based backup products. The candidate will be responsible for validating the design, performance, safety, reliability, and life cycle testing of inverter-based applications such as domestic inverters, UPS, power backup solutions, grid-tied and hybrid inverters with a particular focus on power electronics and control circuits. Job Description: 1. Develop and execute validation plans (DVP&R) for inverters, UPS, and solar products. 2. Test performance under varying electrical, loading, thermal, and target application conditions. 3. Validate solar and battery charging algorithms, start/stop and change over behaviour, fault protections, and performance under different operating modes. 4. Validate power and control PCBs for electrical and thermal performance, EMI/EMC, and firmware behaviour. 5. Conduct simulations for different fault injection to verify robustness of control logic. 6. Design and conduct accelerated life testing to assess durability, wear, and power/control circuit endurance. 7. Apply HALT (Highly Accelerated Life Testing), thermal cycling, and endurance runs simulating real-world use cases. 8. Conduct safety testing in accordance with applicable standards (IEC, BIS, IS). 9. Support certification testing (BIS, CE, etc.) for electrical safety, thermal safety. 10. Identify failure modes using DFMEA / FMEA, and ensure corrective actions are implemented. 11.Design and maintain automated test setups including data acquisition, electronic loads, power analysers, and thermal chambers. 12. Maintain high accuracy in instrumentation - power analysers, data loggers, thermal cameras, etc. 13. Automate test processes for repetitive life and endurance testing. 14. Document test plans, protocols, results, and deviations. 15. Prepare detailed validation reports and support cross-functional teams with findings and recommendations. 16. Maintain traceability and compliance documentation aligned with quality management systems. Qualification: 1. Bachelor’s degree in electrical / Electronic Engineering. 2. 5–10 years of experience in product validation and reliability testing of inverter, solar inverter, hybrid inverter and different types of batteries. Must Have Skills: 1. Hands-on experience with power electronics, inverter circuits, embedded system and firmware validation. 2. Proficient in using lab instruments – oscilloscopes, power meters, DAQs, grid simulator and solar simulators, power supply, temperature probes, thermal imagers etc. 3. Experience with low and high frequency-based inverter circuits, PWM, MPPT, SMPS circuits. 4. Strong understanding of different solar panel technologies and their characteristics. 5. Strong understanding of different battery chemistries (lead acid, lithium-ion, sodium ion) and their behaviour in different test conditions. 6. Experience with high-voltage or high-power systems (above 5 kW). 7. Proficiency in MS Office. Desirable Skills: 1. Working knowledge of reliability prediction tools and techniques. 2. Knowledge of EMI/EMC compliance testing. 3. Test automation techniques, data analysis. 4. Certification in Reliability Engineering. 5. Statistical reliability analysis (Weibull, Arrhenius) to estimate MTBF and predict failures. Show more Show less

Job Title: Game/Simulation Developer – MSME Entrepreneurship Simulator (StartupSimX) Location: Remote/Hybrid (Preferred: Lucknow) Experience: 2+ Years in Game Development / Simulation Design Employment Type: Full-Time / Contract Skills: Unity / Phaser / Godot / JavaScript, JSON scenario logic, gamification, PWA-first UI CTC: As per industry standards About the Project – StartupSimX StartupSimX is a first-of-its-kind MSME entrepreneurship simulation platform , designed to help aspiring and existing entrepreneurs across India navigate real-world business scenarios. This interactive sandbox mimics decisions around GST, vendor sourcing, loans, staffing, and crisis handling. You’ll help build a powerful simulation engine and gamified learning experience for India's next-generation entrepreneurs. Key Responsibilities Design and develop modular simulation engines that replicate real-life business decision-making processes. Build roleplay-driven micro-simulations such as GST filing, procurement, staffing, and crisis handling. Implement branching scenario logic using weighted decision trees or JSON-based configs. Integrate AI/NLP-driven mentor responses with our GPT-based assistant and feedback engine. Design gamification systems : levels, missions, badges, and leaderboards. Build a PWA-compatible, mobile-first frontend with multilingual support (Hindi, English, regional languages). Coordinate with product managers, designers, and domain experts to implement sector-specific logic (e.g., food processing, textiles). Integrate mock APIs: Razorpay, ONDC, GeM, Zoho/KhataBook for realistic simulations. Assist in building an admin dashboard for scenario creation and analytics monitoring. Required Skills ✅ 2+ years of experience in simulation/game development (Unity, Phaser.js, Godot, or custom JS/TS engines) ✅ Strong knowledge of JavaScript/TypeScript , HTML5 Canvas/WebGL or React-based frontends ✅ Experience designing decision trees, simulation loops , and gamified mechanics ✅ Understanding of JSON-based scenario configuration and modular simulation architecture ✅ Experience with API integration (RESTful, OAuth, sandbox testing) ✅ Comfortable with agile workflows , Jira/Trello, GitHub ✅ Basic knowledge of Indian MSME ecosystem or eagerness to learn Bonus Skills (Preferred but not Mandatory) Experience with PWA development Voice-enabled or speech-to-text integration Familiarity with GPT, LLM-based assistants, or NLP tools Prior work on ed-tech, fintech, or social impact projects Hindi/regional language UI support experience Interested candidates can share their CV at 📩 hr@varionadvisors.com or WhatsApp 📱 9236454882 .Tips: Provide a summary of the role, what success in the position looks like, and how this role fits into the organization overall. Show more Show less

Company Description Gamma Rotors Pvt. Ltd. is dedicated to creating innovative UAVs and camera stabilization systems that redefine camera placement and logistics capabilities. Our UAVs are made indigenously, combining state-of-the-art technology with world-class hardware without compromising on quality. We deliver on our promises by addressing individual needs and committing to unparalleled R&D. Our culture of constant innovation and curiosity drives our success. Role Description This is a full-time, on-site role located in Noida for a Drone Instructor. The Drone Instructor will be responsible for training individuals in drone piloting and handling UAV operations. The instructor will also develop training materials, provide one-on-one and group training sessions, ensure safety standards are met, and stay updated on the latest drone technologies and regulations. Responsibilities: Conduct hands-on drone flight training sessions for civilians, professionals, and defense personnel. Deliver theoretical training covering drone fundamentals, DGCA rules, safety protocols, and flight planning. Prepare and update training material, SOPs, and documentation for internal and external use. Customize training programs based on audience (e.g., industrial trainees vs. defense forces). Assist in simulator-based training and post-training evaluations. Ensure all training adheres to regulatory and company safety standards. Provide support during field demos, trials, and operational deployments as needed. Required Skills & Qualifications: Strong drone piloting experience (multirotor and/or fixed-wing platforms). Prior experience as a drone trainer/instructor preferred. Familiarity with DGCA drone guidelines and airspace classifications. Excellent communication and interpersonal skills. Ability to work with discipline and adaptability when training defense personnel. Technical knowledge of drone components, troubleshooting, and mission planning. Willingness to travel and conduct on-site training programs. Show more Show less

About Client Our client is a market-leading company with over 30 years of experience in the industry. As one of the world’s leading professional services firms, with $19.7B, with 333,640 associates worldwide, helping their clients modernize technology, reimagine processes, and transform experiences, enabling them to remain competitive in our fast-paced world. Their Specialties in Intelligent Process Automation, Digital Engineering, Industry & Platform Solutions, Internet of Things, Artificial Intelligence, Cloud, Data, Healthcare, Banking, Finance, Fintech, Manufacturing, Retail, Technology, and Salesforce Hi....! We are hiring for below Positions Job Title: Firmware Developer Key Skills: Firmware , Embedded C/C++ , Emulator, Simulator, and Debuggers , 32/64-bit processors , CAN, CAN_FD, I2C, SPI, UART. Job Locations: Hyderabad Experience: 7 – 15 Years Budget: 18 - 24 LPA Education Qualification : Any Graduation Work Mode: Hybrid Employment Type: Contract Notice Period: Immediate - 15 Days Interview Mode: 2 Rounds of Technical Interview + Including Client round Job Description: B. Tech/ M. Tech or equivalent in ECE/EEE from reputed institutes with 7+ years of hands-on experience in developing firmware . Must have developed multiple products from concept through production (has been through one or more big project cycle) Should be very strong in ‘C’ / C++ and assembly Language programming. Hands-on Firmware development experience on 32/64-bit processors with multi core and into heterogeneous systems and development tools like Emulator, Simulator, and Debuggers etc. Hands-on experience in system programming & kernel programming in RTOS, Embedded Linux. Experience in protocols like CAN, CAN_FD, I2C, SPI, UART . Interested Candidates please share your CV to sushma.n@people-prime.com Show more Show less

The Engineer 1 or Scientist 1 will typically work independently but within a team framework, to develop and support products within the Technology groups and to achieve objectives. Work is still performed within defined parameters and skills are improved upon for making work decisions, applying concepts to issues of moderate complexity, and resolving issues through immediate action or short-term planning. This level requires a greater knowledge and demonstration of competencies to use the tools, materials, products, and processes in the development and support of the technology. Coordinates expertise in one or more engineering and science disciplines across the technology project portfolio, assuring rigor is applied through the design and development processes. Ensures needed personnel skills and expertise are in place across the organization for the discipline. Gas Turbine – Combustion Aero & Heat Transfer Design Engineer, Do you relish the prospect of working with advanced cutting-edge energy technology products? Do you love designing products that will innovate? Join our Industrial & Energy Technology Team! The Industrial & Energy Technology (IET) organization brings together incredible expertise, technologies, and services. Together we are creating a portfolio of powerful technologies and solutions. We focus on supporting industrial and energy customers, driving industrial productivity, and enabling a reliable, efficient, net-zero energy system. Partner with the best As a Gas Turbine – Combustion Aero & Heat Transfer Design Engineer, you will be responsible for activities contributing to the design and development of products, solutions, and systems. Also, you be responsible for activities linked to technical improvement of existing products and components which requires Comprehensive in-depth understanding of complex and highly technical concepts and principles in the own part of the function You will provide technical contribution towards New Product Development. You will be an expert in gas turbine thermal and secondary flows design as well as strictly collaborate with combustion, aerodynamics As a Gas Turbine – Combustion Aero & Heat Transfer Design Engineer, you will be responsible for: Perform Aero-Thermal studies on Gas Turbine Combustion architecture comprising of Burner, Liner, Transition piece and several other parts of Combustion system. Developing 1D, 2D & 3D models for Aero-Thermal studies, using analytical calculations with inhouse and commercial tools while using the domain knowledge to make design decisions. Perform Aero-Thermal model updates based on experimental outcomes and perform data validation and subsequently support the cross functional Mechanical design team to know components durability. Should look out for IP opportunities within the project scope or other and prepare invention disclosures to protect the technology that provides competitive advantage to the business Participate as a presenter or reviewer in technical and program reviews Collaboration with cross-functional teams to achieve program and business objectives. Assure proper documentation of technical data generated for the assigned projects and/or tasks consisted with engineering policies and procedures Fuel your passion To be successful in this role you will: Have a Master’s in Mechanical, Thermal & Aerospace Engineering from reputed Institutes with 1 to 5 years of relevant experience. Have knowledge in Heat Transfer, Fluid dynamics & Numerical methods closely related to turbomachinery design Have extensive knowledge of thermal design processes for gas turbine components. Mandatory Tools required: Ansys Workbench, UG NX ; CFX ; Fluent ; Microsoft Excel ; Microsoft Power Point Tools exposure: ICEM CFD ; Auto-grid ; SIMCENTER ; Flow Simulator ; Python One-dimensional flow network solvers knowledge Work in a way that works for you. We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns: Working flexible hours - flexing the times when you work in the day to help you fit everything in and work when you are the most productive. Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we must push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect: Contemporary work-life balance policies and wellbeing activities Comprehensive private medical care options A safety net of life insurance and disability programs Tailored financial programs. Additional elected or voluntary benefits About Us: We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for people and the planet. Join Us: Are you seeking an opportunity to make a real difference in a company that values innovation and progress? Join us and become part of a team of people who will challenge and inspire you! Let’s come together and take energy forward. Baker Hughes Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. R149090 Show more Show less

Yularatech is an IT Consulting & Services Company offering high quality end-to-end IT solutions to partner clients. We specialize in IT consulting, IT skills resourcing, and outsourced end-to-end application development and support. Position Summary We are seeking a highly experienced Senior QA to independently handle manual testing for critical payment systems. This role requires deep expertise in payment processing, transaction validation, compliance testing, and defect management. The candidate will be fully responsible for ensuring the accuracy, security, and reliability of payment transactions, from initiation to settlement. This is a hands-on manual testing role—no automation skills are mandatory though an added advantage, but strong domain knowledge and testing expertise are mandatory. The selected individual will lead the end-to-end testing efforts, ensure regulatory compliance, and work closely with cross-functional teams to uphold the highest quality standards. If you are passionate about ensuring the highest standards of quality in every product you test, and have an innovative mindset that will contribute to continuous improvement in QA practices, PLEASE APPLY. Key Skills & Qualifications required · Strong expertise in financial/payment systems: Deep understanding of payment processing, authorization flows, settlements, chargebacks, and financial reconciliation. · Standards Expertise (AS2805 & ISO8583) : Must have hands-on testing experience with AS2805 and ISO8583 payment message formats. · Scheme Compliance (Visa, Mastercard, Others): Proven experience in executing and validating scheme compliance tests for major card networks. · Simulator Proficiency (FINsim, OTS, Paysim): Practical knowledge of payment simulators for test execution and transaction validation. · End-to-End Authorization Flow Understanding: Strong grasp of full payment transaction lifecycle from POS to host, including switch behavior. · Manual Testing Mastery: Ability to design, execute, and document detailed test cases for complex financial transactions. · Defect Lifecycle Management: Proficiency in logging, tracking, and prioritizing issues using JIRA, Bugzilla, HP ALM. · API Testing: Hands-on experience testing payment APIs manually using Postman, SoapUI, or equivalent tools. · SQL & Database Testing: Strong ability to validate financial data using SQL queries in databases like Oracle, PostgreSQL, MySQL. · Compliance & Regulatory Knowledge: Solid understanding of PCI DSS, EMV, PSD2, ISO 20022, ISO 8583 & SWIFT protocols. · End-to-End Testing Expertise: Ability to validate cross-border transactions, multi-currency processing, tax handling, and compliance reporting. · Agile delivery Toolsets: Expertise in using JIRA, Confluence, TestRail, Bugzilla etc. for bug reporting and management · Test management tools: E.g., TestRail, QTest to organize and manage test cases · Mobile testing tools and frameworks: E.g., Appium, Espresso) for iOS and Android applications. Soft Skills ● Highly Impactful communication - Oral, written and presentation to effectively communicate with stakeholders, present and document test plans, test reports, test cases and defects. ● High precision in validating financial transactions, calculations, and reports. ● Ability to detect hidden issues in financial workflows and suggest improvements. ● Candidate must have an independent work ethic, strong communication skills for effective team mentoring and handling. ● Excellent proficiency in English language as the role requires to mentor the junior team members. ● Ability to work autonomously and produce high-quality outputs with minimal daily interventions. ● Demonstrates leadership qualities and mentor the team as needed. ● Professionalism, Positivity, Integrity, and ability to handle confidential information. ● Ability to take ownership of enhancing the QA processes and drive continuous improvement initiatives. Primary Responsibilities 1. Ownership & Leadership of QA for Payment Systems: · Independently manage the entire QA process for the payment system. · Define test strategies, plans and execution roadmaps for payment transactions. · Ensure the end-to-end test coverage including payment flows, settlements, refunds, chargebacks, and reconciliations. · To work closely with business analysts, developers, and product owners to validate requirements and assess risk. · Provide detailed test reports, defect analysis, and risk assessments to stakeholders. 2. Comprehensive Functional & System Testing: · Perform manual functional testing for: o Transaction Processing: Authorization, Clearing, Settlement, Refunds & Reversals. o Payment Gateway Integrations: Visa, Mastercard, AMEX, PayPal, UPI, SWIFT, ACH, SEPA etc. o Reconciliation & Ledger Validation: Ensure transactional consistency across systems. o Card & Bank Payments: Debit/Credit Cards, Net Banking & Digital Wallets. o Cross-Border Payments: Validate multi-currency payments and exchange rate calculations. · Verify invoice generation, fee calculation, and taxation rules. 3. Compliance & Security Testing: · Ensure adherence to PCI DSS, ISO 8583, ISO 20022, PSD2, EMV, SWIFT regulatory standards. · Validate data encryption, tokenization, and masking of sensitive payment data. · Conduct manual security validation to identify data leaks, incorrect permissions, and risk vulnerabilities in payment transactions. · Test fraud detection mechanisms and ensure that alerts are triggered for suspicious activities. 4. API & Backend Testing: · Manually validate REST/SOAP API responses using Postman, SoapUI, or equivalent tools. · Test payment APIs for accuracy, response codes, and error handling. · Validate database transactions using SQL queries to confirm data integrity, reconciliation, and reporting. 5. Performance & Failure Scenario Testing (Manually Identifying System Weaknesses): · Conduct boundary value testing for large transaction amounts. · Simulate failed transactions, declined payments, and chargeback cases. · Identify edge cases in payment failure handling (e.g., expired cards, incorrect CVV, insufficient balance). 6. Defect Management & Risk Reporting: · Log defects in JIRA, HP ALM, Bugzilla, or equivalent tools with clear reproduction steps. · Categorize defects based on severity and prioritize critical payment bugs. · Perform root cause analysis for recurring payment issues and suggest preventive measures. · Collaborate with developers, support teams, and business analysts to ensure quick issue resolution. 7. UAT Support & Production Validation: · Assist business teams in conducting User Acceptance Testing (UAT). · Validate production deployments to ensure smooth go-live without financial discrepancies. · Provide post-production monitoring support to confirm system stability. Mandatory / MOST IMPORTANT Pre-requisites Ø A total of 10 years and a minimum of 3-5 years of professional experience working specifically in payment systems or Financial application testing. Ø Ability to balance quality, security, usability, and efficiency in payment system testing. Ø Bachelor’s / Master’s degree in Computer Science, Information Technology or a related field is preferred. Ø Strong knowledge of payment system architectures and components, including payment gateways, processors, acquirers, issuers, card networks, and digital wallets. Ø Experience in working for International clients and projects with cross-cultural audiences. Ø Understanding of the end-to-end payment processing lifecycle, including authorization, authentication, clearing, and settlement. Ø Decent exposure to performance testing tools (e.g., JMeter, LoadRunner) to evaluate system performance under load. Ø Understanding of Security testing practices and tools (e.g., OWASP ZAP, Burp Suite) to identify vulnerabilities Ø Experience working in Agile or Scrum environments for iterative development and delivery. Ø Ability to manage multiple projects, coordinate tasks, and ensure timely delivery of test reports. Desirable ● Experience with performance and load testing tools (e.g., JMeter). ● Proficiency with CI/CD tools (e.g., Jenkins, Travis CI, CircleCI) ● Exposure to cloud-based payment solutions (AWS, Azure, or Google Cloud). ● Familiarity with risk management and fraud detection techniques in payment systems. ● Certifications such as Certified Software Tester (CSTE), Certified Payment Professional (CPP), or Certified Payment Card Industry Security Auditor (CPISA). ● Familiarity with BDD tools and frameworks (e.g., Cucumber, Spec Flow) Additional Information ● We offer competitive salary package and a comprehensive benefits package. ● You will have the opportunity to work on exciting and impactful projects. ● You will be joining a collaborative and inclusive work environment. ● Enjoy continuous learning and professional development opportunities. ● Candidate is expected to work with the client’s team based in Australia (On split time zones i.e. both IST Or AEST on need basis) Show more Show less

Key Responsibilities Development : Design and develop complex document templates and layouts using SmartCOMM tools, including Communication Designer, Template Editor, Data Model Designer, and Interactive Editor. Integrate SmartCOMM with external systems (e.g., Guidewire, Salesforce, Duck Creek, etc.) via APIs or batch processing. Configure and maintain Data Models, Data Transforms, Content Rules, and Layout Mappings. Collaborate with business analysts to understand business requirements and translate them into technical solutions using SmartCOMM. Optimize performance and ensure best practices in document generation and rendering. Testing Create and execute unit tests, functional tests, and regression tests for SmartCOMM communications. Conduct end-to-end testing including data input, template rendering, and output validation (PDF, email, SMS, etc.). Work with QA teams to identify bugs and ensure smooth releases. Validate integrations with upstream/downstream systems using XML/JSON data files. Maintain test documentation, test cases, and traceability matrices. Support & Collaboration Provide technical support for SmartCOMM configurations during development and post-go-live phases. Participate in agile ceremonies such as stand-ups, sprint planning, and retrospectives. Document solutions and contribute to knowledge sharing and continuous improvement initiatives. Technical Skills SmartCOMM Tools : Communication Designer Template Editor Data Model Designer Layout Designer Interactive Communications Document Output Formats PDF, Word, Email, SMS Languages & Markup XML, XSLT, JSON, HTML, CSS Integration Skills REST/SOAP APIs, File-based integrations (batch mode) Testing Tools JIRA, Zephyr, Postman, SOAP UI, SmartCOMM Preview and Simulator Version Control Git, Bitbucket, SVN CI/CD & DevOps Jenkins, Azure DevOps, GitHub Actions Experience with insurance platforms (Guidewire/Duck Creek), or CRM (Salesforce) is a plus. Qualifications Bachelors degree in Computer Science, Information Technology, or a related field. 3-6 years of hands-on experience in SmartCOMM development and testing. Strong understanding of customer communications management (CCM) platforms. Solid analytical and problem-solving skills. Strong attention to detail and ability to multitask. Excellent communication and documentation skills. Preferred Certifications (Nice To Have) SmartCOMM Developer Certification ISTQB Certified Tester Agile/Scrum Certification What We Offer Opportunity to work on next-generation communication solutions. Flexible working environment with strong learning and development support. Competitive salary, benefits, and performance-based incentives. Work with industry leaders in insurance, healthcare, or BFSI sectors (ref:hirist.tech) Show more Show less

Job Description We are seeking a talented Unity 3D Developer with at least 3 years of hands-on experience in developing 3D applications, games, or simulations using Unity. The ideal candidate will be proficient in Unity's tools and workflows and have a strong understanding of 3D concepts, rendering techniques, and optimization. You will be responsible for building, implementing, and optimizing real-time 3D environments, ensuring high-quality performance and user experience across a range of platforms. Key Responsibilities Design, develop, and maintain interactive 3D applications and games in Unity. Work closely with cross-functional teams including designers, artists, and project managers to implement features and achieve a high level of quality and performance. Develop and optimize game logic, user interfaces, animations, and complex 3D models within Unity. Integrate assets, animations, and other resources into Unity projects. Write clean, maintainable, and efficient code, following best practices and design patterns. Troubleshoot, debug, and optimize applications for performance and memory usage across different platforms (e.g., PC, console, mobile). Stay up-to-date with the latest trends, tools, and best practices in Unity development and 3D programming. Collaborate in a team environment to meet deadlines and deliver high-quality products. Required Skills & Qualifications 3+ years of experience in Unity 3D development, with a strong portfolio of projects (games, simulations, applications). Experience in Web GL (Web Graphics Library), Serious Games, Training simulator and Published experiences. Solid understanding of C# programming and object-oriented principles. Experience with 3D rendering, animation, physics, and AI in Unity. Strong knowledge of Unity’s UI system (Canvas, Prefabs, Animations). Experience with optimizing 3D environments for performance (LOD, batching, culling, etc.). Familiarity with Unity Asset Store, third-party tools, and plugins. Experience with multi-platform development (mobile, desktop, VR/AR, etc.). Knowledge of version control systems (e.g., Git). Strong problem-solving skills and ability to debug complex issues. Excellent communication skills and the ability to work well within a team. Preferred Skills Experience with multiplayer game development and networking in Unity. Familiarity with shaders and materials in Unity. Experience with virtual reality (VR) or augmented reality (AR) development. Knowledge of continuous integration/continuous delivery (CI/CD) pipelines. Understanding of game monetization, in-app purchases, or advertising. Education Bachelor’s degree in Computer Science, Game Development, or a related field (or equivalent experience). Show more Show less

About Client: Our Client is a global IT services company headquartered in Southborough, Massachusetts, USA. Founded in 1996, with a revenue of $1.8B, with 35,000+ associates worldwide, specializes in digital engineering, and IT services company helping clients modernize their technology infrastructure, adopt cloud and AI solutions, and accelerate innovation. It partners with major firms in banking, healthcare, telecom, and media. Our Client is known for combining deep industry expertise with agile development practices, enabling scalable and cost-effective digital transformation. The company operates in over 50 locations across more than 25 countries, has delivery centers in Asia, Europe, and North America and is backed by Baring Private Equity Asia. Job Title :Performance Tester Key Skills :AWS,Jmeter,AppDynamics, New Relic, Splunk, DataDog Job Locations :Chennai,Pune Experience : 65-7 Education Qualification : Any Graduation. Work Mode : Hybrid. Employment Type : Contract. Notice Period : Immediate Job Description: Experience, Skills and Qualifications: • Performance Engineering, testing and tuning cloud hosted digital platforms (e.g. AWS) • Working knowledge (preferably with an AWS Solutions Architect certification) on Cloud Platforms like AWS and AWS Key Services and DevOps tools like CloudFormation, Teraform • Performance engineering and testing of web Apps (Linux) Performance testing and tuning web-based applications • Performance engineering toolsets such as JMeter, Microfocus Performance Center, BrowserStack, Taurus, Lighthouse, • Monitoring/logging tools (such as AppDynamics, New Relic, Splunk, DataDog) • Windows / UNIX / Linux / Web / Database / Network performance monitors to diagnose performance issues along with JVM tuning and Heap analysing skills • Docker, Kubernetes and Cloud-native development and container orchestration frameworks, Kubernetes clusters, pods & nodes, vertical/horizontal pod autoscaling concepts, High availability • Performance Testing and Engineering activity planning, estimating, designing, executing and analysing output from performance tests • Working in an agile environment, "DevOps" team or a similar multi-skilled team in a technically demanding function • Jenkins and CI-CD Pipelines including Pipeline scripting • Chaos engineering using tools like Chaos toolkit, AWS Fault Injection Simulator, Gremlin etc. • Programming and scripting language skills in Java, Shell, Scala, Groovy, Python and knowledge of security mechanisms such as OAuth etc. • Tools like GitHub, Jira & Confluence • Assisting with Resiliency Production support teams and Performance Incident Root Cause Analysis • Ability to prioritize work effectively and deliver within agreed service levels in a diverse and ever-changing environment • High levels of judgment and decision making, being able to rationalize and present the background and reasoning for direction taken • Strong stakeholder management and excellent communication skills. • Extensive knowledge of risk management and mitigation • Strong analytical and problem-solving skills Show more Show less

Job Title: CPL Ground Instructor Location: Hyderabad (On-site) Employment Type: Freelance/Contractual Job Summary : We are seeking a knowledgeable and experienced CPL Ground Instructor to join our aviation training team. The ideal candidate will possess in-depth subject matter expertise in areas including navigation, meteorology, air regulations, and RTR, and will be responsible for delivering high-quality theoretical and practical instruction to aspiring flight operations professionals. Key Responsibilities: Develop and deliver instructional materials based on practical analysis and aviation insights. Serve as a subject matter expert and provide relevant supporting content tailored to learners with diverse experience levels and backgrounds. Prepare comprehensive instructional modules aligned with certification standards for various flight operation categories. Design training content covering a wide range of aviation topics including operational procedures, aircraft systems, emergency procedures, and navigation, in accordance with standard procedures and regulatory policies. Conduct practical training sessions that complement theoretical lessons, ensuring a well-rounded learning experience. Utilize and create effective training manuals, equipment-specific course materials, and additional instructional resources as per institutional guidelines. Organize and lead cockpit familiarization sessions; assess and report on student proficiency using established evaluation parameters. Monitor student progress and offer additional coaching and counselling to support struggling learners. Innovate and implement new instructional techniques, training aids, and methodologies to enhance training effectiveness and engagement. Collaborate with instructional system designers to develop classroom materials, simulator and aircraft training sessions, as well as instructor and student guides. Review and update existing training materials and methods to ensure alignment with current and future industry requirements. Requirements & Skills: ❖ Mandatory Qualifications: Valid CPL or ATPL License Valid Instrument Rating Valid Medical Certification ❖ Experience: • Minimum of 2–3 years of teaching/training experience in aviation. • Proven expertise in the following areas: ✓ Navigation ✓ Meteorology ✓ Air Regulations ✓ RTR (Radio Telephony Restricted) ❖ Skills: • Strong communication and presentation skills • Ability to engage students with varying levels of experience • Proficient in curriculum development and lesson planning • Analytical mindset with a focus on training outcomes • Comfortable with using training tools and simulators If you are interested share your resume at hr3@tncaviation.in Show more Show less

Job Description Summary Are you inspired for future oriented, challenging role? Join our dynamic FACTS team at Noida and play a key role in shaping the future of electrical power systems through FACTS engineering. Apply your expertise and passion to deliver innovative solutions that empower our customers and enhance the grid reliability and efficiency. You will have the opportunity to work on projects worldwide, leading the energy transition with high-quality products and services. This offers opportunities for professional growth that is supported by trainings arranged internally and externally We are seeking a highly skilled and experienced FACTS (Flexible AC Transmission Systems) electrical engineer with a strong background in control software, simulation. Work involves performing control system design targeting to implement control features complying with highly demanding customer specifications. In addition, you get to see the work put into action, first in real time testing in laboratory and then in the commissioning of the compensator at the actual site. The work may also include taking part in R&D activities on your areas of expertise FACTS PDG part of GE Vernova business delivers high power (>100MVAr) Flexible AC Transmission Systems (FACTS) as Static Synchronous Compensators (STATCOM) and Static Var Compensators (SVC), Fixed Series Capacitors (FSC) and Synchronous Condensers (SC) systems. These FACTS devices are used to control power system voltage and reactive power flow, also typically used to improve the integration of renewables to the power system making the future power system more sustainable, well as to improve the power system stability and transmission system efficiency. FACTS technology is at the heart of electrifying tomorrow's energy. https://www.gevernova.com/grid-solutions/facts.htm Job Description In this position, you will be mainly involved in design and engineering of SVC and STATCOM solutions in close coordination with various engineering team globally. As a key member of team, you will be responsible for designing of Flexible AC Transmission Systems (FACTS) solution for global projects & tenders Role & Responsibilities Defining control system requirements for the software architecture, development, and verification Performing PSSE/PSCAD and PSSE/RSCAD Power system network conversion, modelling, and verification, Prepare RSCAD model and perform study on Real Time Digital Simulator (RTDS) model FACTS project Plant modelling in various simulation tools (MATLAB, RSCAD, PSCAD etc) and its verification, dynamic performance studies using both offline and online simulation tools Protection coordination design and validation, control, protection, and sequencing strategy specifications, parameters tuning to meet grid stability criteria specified in customer technical specifications. Technical leadership during FST and FAT programs to ensure proper verification and validation of control and protection system performance against requirements, support to validation team for analysis of results during Factory performance test (FPT), factory acceptance test (FAT) on Real Time Digital Simulators (RTDS) Execute control and protection testing and system energizing, troubleshooting of site issue related to control software in coordination with commissioning team Research and development in the field of FACTS control system design Required Qualifications B.Tech/ BE / M.TECH/M.E (or higher) in Electrical/ Power Electronics/Power Systems/ control system with 3-10 years of relevant experience. Knowledge and experience on some of simulation tools for electric systems such as EMTDC / PSCAD, PSS/E, RTDS, MATLAB/Simulink. Specialized knowledge in Electrical Power Engineering with good understanding of compensation systems, power electronics and understanding of control theory behind HV/EHV grid connected devices. Strong oral and written communication skills in English. Must be flexible with working hours and willing to travel to support projects globally. Desired Qualifications Experience in modelling of converters for FACTS/HVDC/ drives is considered as an advantage Knowledge of RTDS/RSCAD will be an added advantage. Knowledge of waveform and fault analysis. Ability to take leading role in project and willingness to work in groups as well as individually Experience in international projects with working exposure of international standards as IEC, IEEE etc Additional Information Relocation Assistance Provided: Yes Show more Show less

About Client: Our Client is a global IT services company headquartered in Southborough, Massachusetts, USA. Founded in 1996, with a revenue of $1.8B, with 35,000+ associates worldwide, specializes in digital engineering, and IT services company helping clients modernize their technology infrastructure, adopt cloud and AI solutions, and accelerate innovation. It partners with major firms in banking, healthcare, telecom, and media. Our Client is known for combining deep industry expertise with agile development practices, enabling scalable and cost-effective digital transformation. The company operates in over 50 locations across more than 25 countries, has delivery centers in Asia, Europe, and North America and is backed by Baring Private Equity Asia. Job Title :Performance Tester Key Skills :AWS,Jmeter,AppDynamics, New Relic, Splunk, DataDog Job Locations :Chennai,Pune Experience : 65-7 Education Qualification : Any Graduation. Work Mode : Hybrid. Employment Type : Contract. Notice Period : Immediate Job Description: Experience, Skills and Qualifications: • Performance Engineering, testing and tuning cloud hosted digital platforms (e.g. AWS) • Working knowledge (preferably with an AWS Solutions Architect certification) on Cloud Platforms like AWS and AWS Key Services and DevOps tools like CloudFormation, Teraform • Performance engineering and testing of web Apps (Linux) Performance testing and tuning web-based applications • Performance engineering toolsets such as JMeter, Microfocus Performance Center, BrowserStack, Taurus, Lighthouse, • Monitoring/logging tools (such as AppDynamics, New Relic, Splunk, DataDog) • Windows / UNIX / Linux / Web / Database / Network performance monitors to diagnose performance issues along with JVM tuning and Heap analysing skills • Docker, Kubernetes and Cloud-native development and container orchestration frameworks, Kubernetes clusters, pods & nodes, vertical/horizontal pod autoscaling concepts, High availability • Performance Testing and Engineering activity planning, estimating, designing, executing and analysing output from performance tests • Working in an agile environment, "DevOps" team or a similar multi-skilled team in a technically demanding function • Jenkins and CI-CD Pipelines including Pipeline scripting • Chaos engineering using tools like Chaos toolkit, AWS Fault Injection Simulator, Gremlin etc. • Programming and scripting language skills in Java, Shell, Scala, Groovy, Python and knowledge of security mechanisms such as OAuth etc. • Tools like GitHub, Jira & Confluence • Assisting with Resiliency Production support teams and Performance Incident Root Cause Analysis • Ability to prioritize work effectively and deliver within agreed service levels in a diverse and ever-changing environment • High levels of judgment and decision making, being able to rationalize and present the background and reasoning for direction taken • Strong stakeholder management and excellent communication skills. • Extensive knowledge of risk management and mitigation • Strong analytical and problem-solving skills Show more Show less

At Cadence, we hire and develop leaders and innovators who want to make an impact on the world of technology. Job Description GCS AE Job Description Document Job Title: Returnship – GCS Location: Noida/Bangalore Special Internship (Returnship) of 6-months for Women candidates with prior experience and a minimum of 2-year gap/break for Application Engineer Role at Global Customer Success Team of Cadence Design Systems Cadence is a pivotal leader in electronic design, building upon more than 30 years of computational software expertise. The company applies its underlying Intelligent System Design strategy to deliver software, hardware, and IP that turn design concepts into reality. Cadence customers are the world’s most innovative companies, delivering extraordinary electronic products from chips to boards to systems for the most dynamic market applications, including consumer, hyperscale computing, 5G communications, automotive, aerospace industrial, and health. The Cadence Advantage The opportunity to work on cutting-edge technology in an environment that encourages you to be creative, and innovative, and to make an impact. Cadence’s employee-friendly policies focus on the physical and mental well-being of employees, career development, providing opportunities for learning, and celebrating success in recognition of the specific needs of the employees. The unique “One Cadence – One Team” culture builds and fosters diversity, equity, and inclusion to maximize our ability to innovate, drive growth, and win with our customers. Cadence is committed to equal employment opportunity and employment equity throughout all levels of the organization. Multiple avenues of learning and development available for employees to explore as per their specific requirements and interests You get to work with a diverse team of passionate, dedicated, and talented individuals who go above and beyond for our customers, our communities, and each other—every day. Job Summary Inviting applications from Women candidates for the 6-month training program to enable re-entry to work as an Application Engineer in the Global Customer Success team at Cadence. The program involves a 6-month training (by our experienced Application Engineers), including In-Class and On the Job training, which prepares candidates to work as an Application Engineer in Global Customer Success (GCS). GCS provides remote technical support to WW customers of Cadence in all its Software products. Application Engineers apply their expertise and debugging skills to resolve customer issues quickly, collaborate with R&D to ensure bug fixes and create technical artifacts for Cadence Support Portal to enable customer self-help. The role requires continuous learning, excellent problem-solving, and communication skills. As a member of the GCS Organization for the Custom IC & Simulation group, you will partner with worldwide Cadence customers to provide post-sales technical consultation for Custom IC domain products involving Front End (Design Editing, Netlisting, Simulation), Back End (Layout Generation, Placement and Routing, Verifying), Design Porting, Tool Setup, and Customization for implementing cutting-edge designs. This involves working closely with the customers to understand and debug complex issues enabling them to proceed further with design cycle phases, helping them leverage the latest tool capabilities, and guiding them with the implementation of software in their design methodologies. You will have an opportunity to acquire both breadth and depth of technical knowledge, get wide exposure to the latest design practices in the industry, and demonstrate expertise by authoring high-impact knowledge content. This role also provides an opportunity to participate in the evolution of key technology solutions to the most pressing design problems. In this role, you will have the opportunity to work with product teams to identify and prioritize product improvement initiatives with your timely feedback and observations. This an excellent opportunity to work in a supportive, flexible, and friendly work environment that GCS offers, where we are vested in each other’s success, and are passionate about technology and innovation. Job Responsibilities Duties include but are not limited to assisting customers with flow-setup, queries, and issues raised by them, working with Product R&D on defects and enhancements, and Creating a knowledge database for Cadence Online Support customers on common problems and solutions. Goal is to provide a superior Support experience to Cadence customers. Additional responsibilities may include working on various company projects that require excellent teaming skills and the ability to work across functional areas to optimize the support flow. Qualifications Minimum of 2 Years of break post the earlier experience. Bachelor’s Degree in Electrical / Electronics / Electronics and Communication / Embedded System Engineering with 3-5 years related experience. OR Masters with 1-3 years of related experience. Experience And Technical Skills Required Applicable experience includes working product knowledge of Virtuoso Schematic Editor (L/XL), Virtuoso Analog Design Environment (Explorer, Assembler), Virtuoso Layout Suite (L/XL/GXL), Design Framework (DFII) Environment and Various Translators, Any Spice Simulator, PCells, OpenAccess, Installation and Licensing, Technology file, SKILL, and Customization, Standard Cell or Library Characterization, Mixed Signal Simulation etc. Working knowledge & Hands on experience of Cadence or competitor or in-house EDA tools; technical customer support problem-solving experience is a must. Must have excellent debugging skills and the ability to separate out critical issues from trivial ones. Behavioral Skills Required Must possess strong written, verbal, and presentation skills. Ability to establish a close working relationship with customers, peers, and management. Explore what’s possible to get the job done, including creative use of unconventional solutions. Work effectively across functions and geographies. Push to raise the bar while always operating with integrity. Regards K Madhu Prasad (Madhu Reddy) K Madhu Prasad kmadhup@cadence.com Hiring Team www.cadence.com | We’re doing work that matters. Help us solve what others can’t. Show more Show less

Company Qualcomm India Private Limited Job Area Engineering Group, Engineering Group > Software Engineering General Summary As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world class products that meet and exceed customer needs. Qualcomm Software Engineers collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Minimum Qualifications Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. Thorough Embedded C programming knowledge & experience (especially pointers, structures, linked lists etc.,) & Assembly programming knowledge Hands On Experience for Device Driver development with any of standard protocols such as SPI, UART, USB etc., Thorough RTOS knowledge and experience (Mutex, spinlocks, Queues, Signaling, Events, Deferred function calls & Callbacks, Multi-thread & Multi-process environments, Concurrency Scenarios etc.,), Linux Knowledge, Kernel & User Space knowledge Thorough experience of Operating systems, Microprocessor / computer architecture. Strong analytical and debugging skills Hardware and architectural knowledge / experience (Processor Architecture, Cache, interrupts, Memory barriers, Strong ordering etc.,) Emulator, simulator environment & JTAG debugging knowledge / experience Nice to Have - Hands On Experience or knowledge for Inter Processor Communication Protocol, Debug Logging framework, Heap Management & Timer implementations Applicants : Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies : Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers. 3071258 Show more Show less

Job Type Full-time Description SIGN ON BONUSES AVAILABLE** Provide MH-60R training and instruction to foreign military students employing academics, simulation devices, and in-aircraft flight experience. Provide a full range of MH-60R subject matter expertise in development of safe, sound flight operations and training. May provide additional special services such as courseware and publication reviews, grade sheet development, safety, quality audits, scheduling, training tracking, functional check flights, and other duties as may be assigned. THIS POSITION IS LOCATED IN INDIA Company Information ATC is a professional consulting/training development and manufacturing company that specializes in pilot, aircrew, ground-crew, and maintenance training solutions for rotary-wing, fixed-wing, and tilt-rotor aircraft operations. Since our inception in 2001, we have built an excellent reputation for designing, manufacturing, and implementing creative training solutions to the Department of Defense (DoD), United States Marine Corps (USMC), and NAVAIRSYSCOM. ATC's growth can be largely attributed to a corporate policy of integrity, synergized client collaborations, and completing all contracts early and under budget. That’s the ATC difference. Job Description The primary duty of the Instructor Pilot (IP) is to train foreign students, and will involve direct interface with foreign transition pilot trainees, government contractors, active-duty Navy instructors, and other local personnel, while operating aircraft and associated trainers and equipment (manning trainer/equipment instructor station(s) and classroom instruction). Conduct scheduled IP led/supported training for training devices and systems trainers, including operating and static aircraft, including briefs and debriefs, using traditional and modern tools such as interactive white boards, computers and video projectors. Evaluate and document student training/mission performance as required. Evaluate and record trainer performance in accordance with established Navy doctrine. Review curriculum, assess, and recommend improvements to the training program via the appropriate training management officials. Perform flights and flight training consistent with USG-approved flight syllabus. Conduct training device operation/instruction to personnel as necessary, to include briefing, debriefing and grading/assessments. Provide academic instruction to include instructor-led lecture discussion for self-paced computer aided instruction (CAI), computer-based training (CBT), etc. in support of courses required for MH-60R Sensor Operators. Provide classroom instruction and recommendations for improvement, to include test materials, lesson plans, and trainee guides under the guidelines of current directives. Attend required scheduled meetings (e.g., Scheduling, Standardization, Instructor Pilot/Aircrew, Safety). Perform administrative duties such as record keeping, student progress monitoring, counseling, quality assurance, safety, security, and maintenance of training programs and equipment. Safely conduct classroom, academic and practical labs, simulator, and flight instruction, maintaining a clean workspace and classroom environment. Perform daily/weekly flight schedule writing duties as assigned. Assist the IMSO for support of student movement through the training program. Stand external door security/entry control point watch for a secure facility. Assist with other administrative and non-administrative duties as assigned. Complete additional duties as assigned by the Program Manager. Requirements Aviation instruction is a highly specialized function that requires the instructor to have credibility established by prior aircraft operational experience, prior instructional experience, and the ability to hold the attention of the students. IP shall have a minimum of 500 pilot in command hours as an MH-60R IP or Evaluator. Comparably experienced H-60B/F/H/S pilots with ASW experience also considered. CFI/II or equivalent military instructor ratings preferred. Shall have previous anti-submarine and anti-surface warfare mission experience. Possess and maintain a FAA Class II Medical Certificate. Must be eligible to hold a SECRET DoD Personal Security Clearance. Must be willing to work any hours, any shift, or day of the week as required. Must be able to work overtime as required. Additional Requirements Complete and maintain all required aviation physiology and water survival qualifications. Successfully complete an MH-60R refresher syllabus, if required, including instructor under training (IUT) syllabus and functional check pilot (FCP) syllabus. Be designated an instructor by designated naval authority. Annually pass/maintain an MH-60R NATOPS and instrument evaluations/qualifications administered by designated naval authority in accordance with naval aviation flight directives and civilian contract governing directives. Complete other necessary qualifications annually or as required, including but not limited to laser safety, spatial disorientation training, and NITE lab. Remain flight current/proficient as per squadron flight directives and civilian contract governing directives. Maintain instrument, take-off, landing, emergency procedure, and mission systems operation proficiency. Maintain proficiency in operation of essential all MH-60R aircrew training devices. Security Responsibilities Must comply with all company security and data protection / usage policies and procedures. Personally responsible for proper handling of all information and materials in any form. Shall not divulge any information or afford access to other employees not having a need-to-know. Shall not divulge information outside company without management approval. All government and proprietary information will be accessed and stored electronically on company provided resources. Work Environment Office, hangar, flight line, simulator bays, aircraft. Will at times be exposed to the following conditions: extreme heat, airborne particles, high-decibel noise, hazardous materials, vibration, and confined spaces. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Occasional domestic or international travel may be required. Must be able to walk and climb stairs and ladders into/onto simulators or aircraft. Must be able to stoop, bend, and crawl on top of or under machinery. Must be able to detect odors or hear noises, bangs, or other sounds to detect problems or flaws in the functioning of simulators, aircraft, or the surrounding environment. Language Skills Must have the ability to read, analyze, and interpret complex documents. Will be required to respond effectively to sensitive inquiries and complaints. Must be able to generate effective oral and written presentations and proposals on complex subjects. Show more Show less

Company Qualcomm India Private Limited Job Area Engineering Group, Engineering Group > Software Engineering General Summary As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world class products that meet and exceed customer needs. Qualcomm Software Engineers collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Additional Job Description 3 To 5 Years Of Experience Hands on experience with embedded distributions such as Yocto. Thorough Embedded C programming knowledge & experience (especially pointers, structures, linked lists etc.,) & Assembly programming knowledge Hands On Experience for Device Driver development with any of standard protocols such as SPI, UART, USB etc., Thorough knowledge and experience on operating systems and kernel Thorough RTOS knowledge and experience (Mutex, spinlocks, Queues, Signaling, Events, Deferred function calls & Callbacks, Multi-thread & multi-process environments, Concurrency Scenarios etc.,), Linux Knowledge, Kernel & User Space knowledge Thorough experience of Operating systems, Microprocessor / computer architecture. Strong analytical and debugging skills Hardware and architectural knowledge / experience (Processor Architecture, Cache, interrupts, Memory barriers, Strong ordering etc.,) Emulator, simulator environment & JTAG debugging knowledge / experience Leading a team of junior engineers for managing design, development, delivery and execution of various projects through entire software development life cycle Ownership, accountability, commitment and delivery of project commitments Technology leadership and representation Nice to Have - Hands On Experience or knowledge for Inter Processor Communication Protocol, Debug Logging framework, Heap Management & Timer implementations Minimum Qualifications Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. Applicants : Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies : Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers. 3072322 Show more Show less

Company Qualcomm India Private Limited Job Area Engineering Group, Engineering Group > Software Engineering General Summary As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world class products that meet and exceed customer needs. Qualcomm Software Engineers collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Minimum Qualifications Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. Preferred Qualifications Job Description (3–5-year experience) Thorough Embedded C programming knowledge & experience (especially pointers, structures, linked lists etc.,) & Assembly programming Hands on experience in Designing Debug Architecture & Framework, development of SoC Debug Drivers, development of Debug logging framework, debug logs analytical skills Strong Debug & analytical skills for embedded systems and architecture Hardware and architectural knowledge / experience (Processor Architecture, Cache, interrupts, Memory barriers, Strong ordering etc.,) Thorough RTOS knowledge and experience (Mutex, spinlocks, Queues, Signaling, Events, Deferred function calls & Callbacks, Multi-thread & Multi-process environments, Concurrency Scenarios etc.,), Linux Knowledge, Kernel & User Space knowledge Thorough experience of Operating systems, Microprocessor / computer architecture. Emulator, simulator environment & JTAG debugging knowledge / experience Nice to Have Skills: Hands On Experience for Device Driver development with any of standard protocols such as SPI, UART, USB etc., Level Of Responsibility Works under supervision. Decision-making may affect work beyond immediate work group. Requires verbal and written communication skills to convey information. May require basic negotiation, influence, tact, etc. Tasks do not have defined steps; planning, problem-solving, and prioritization must occur to complete the tasks effectively. Applicants : Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies : Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers. 3074336 Show more Show less

Company Qualcomm India Private Limited Job Area Engineering Group, Engineering Group > Hardware Engineering General Summary As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. Key Technical Skills Requirement Candidate should have deep and sound understating of: Memory basic design understating for different architectures Memory measurement parameters Memory timing/power characterization and compiler engine building with all accuracy parameters involved Memory power views All the LVF/different forms of variation parameter Memory lib w.r.t. parameters/arcs/SDF conditions/variation parameters/QA steps/different formats Different Simulator tools Should have thorough understanding of release process to customers Knowledge of scripting languages such as Shell, Perl Good working knowledge of MS excel, PPT Mentoring skills to Juniors Applicants : Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies : Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers. 3075899 Show more Show less

Location: Noida Experience: 3-5 years of experience in testing, including 1+ years of experience in Smart IoT/Embedded Products. Position Summary: Pentair is currently seeking IoT Application QA Engineer for IoT projects in the Smart Products & IoT Strategic Innovation Centre in India team. This role is responsible for driving the testing activities for IoT projects in a business unit. Duties & Responsibilities: · Defining Testing strategy for IoT applications. · Testing using IoT Device simulator. · Writing and executing test cases in the following areas of IoT application: o Cloud Server Side / API o Web Application o Mobile App (iOS & Android) o Integration with Enterprise systems. · Test Automation of API, mobile, and web applications. Qualifications and Experience: · Bachelor's degree in Electrical Engineering, Software Engineering, Computer Science, Computer Engineering, or related Engineering discipline. · Experience in Validation & Verification of Software by conducting Smoke testing, Sanity testing, Black box testing, System testing, Regression testing, Integration testing, Functional/Non-functional testing. · Experience in all stages of Software testing including Requirement gathering, Requirement Traceability matrix, and Preparation of Test plan, Test case, Test Bed setup, Test Scripts & Defect tracking by using tools like JIRA, Zephyr, Confluence. · Experience in APIs testing using Postman, SoapUI, Rest Assured. · Experience in mapping business requirements into test specification, designing test cost estimations, preparing test scope & approach. · Experience in complete Software testing life cycle by performing end-to-end call flow for test deliverable through SDLC. · Experience with SCRUM/Agile process, Scaled Agile Framework (SAFe), project planning, tracking, monitoring, and risk management. · Good to have experience in designing and building robust & reliable automated test frameworks for web & mobile applications using automation tools & frameworks like Selenium with Java/C#, Appium, Test project. · Good to have experience in AWS Cloud environment. · Good to have experience in Load & Performance testing using Jmeter for large applications. · Good hands-on source code control tools like Git/SVN etc. along with documentation tools (Confluence, Wiki). Location: Noida Experience: 2-5 years of experience in testing, including 1+ years of experience in Smart IoT/Embedded Products. Position Summary: Pentair is currently seeking IoT Application QA Engineer for IoT projects in the Smart Products & IoT Strategic Innovation Centre in India team. This role is responsible for driving the testing activities for IoT projects in a business unit. Duties & Responsibilities: · Defining Testing strategy for IoT applications. · Testing using IoT Device simulator. · Writing and executing test cases in the following areas of IoT application: o Cloud Server Side / API o Web Application o Mobile App (iOS & Android) o Integration with Enterprise systems. · Test Automation of API, mobile, and web applications. Qualifications and Experience: · Bachelor's degree in Electrical Engineering, Software Engineering, Computer Science, Computer Engineering, or related Engineering discipline. · Experience in Validation & Verification of Software by conducting Smoke testing, Sanity testing, Black box testing, System testing, Regression testing, Integration testing, Functional/Non-functional testing. · Experience in all stages of Software testing including Requirement gathering, Requirement Traceability matrix, and Preparation of Test plan, Test case, Test Bed setup, Test Scripts & Defect tracking by using tools like JIRA, Zephyr, Confluence. · Experience in APIs testing using Postman, SoapUI, Rest Assured. · Experience in mapping business requirements into test specification, designing test cost estimations, preparing test scope & approach. · Experience in complete Software testing life cycle by performing end-to-end call flow for test deliverable through SDLC. · Experience with SCRUM/Agile process, Scaled Agile Framework (SAFe), project planning, tracking, monitoring, and risk management. · Good to have experience in designing and building robust & reliable automated test frameworks for web & mobile applications using automation tools & frameworks like Selenium with Java/C#, Appium, Test project. · Good to have experience in AWS Cloud environment. · Good to have experience in Load & Performance testing using Jmeter for large applications. · Good hands-on source code control tools like Git/SVN etc. along with documentation tools (Confluence, Wiki). Skills and Abilities Required: · Can-do positive attitude, always looking to accelerate development. · Driven; commit to high standards of performance and demonstrate personal ownership for getting the job done. · Innovative and entrepreneurial attitude; stays up to speed on all the latest technologies and industry trends; healthy curiosity to evaluate, understand, and utilize new technologies. · Must be able to provide leadership to technology team while managing multiple tasks and responsibilities. · Excellent communication and presentation skills for interactions with technology team members, SBU stakeholders, company leadership, partners.· Can-do positive attitude, always looking to accelerate development. · Driven; commit to high standards of performance and demonstrate personal ownership for getting the job done. · Innovative and entrepreneurial attitude; stays up to speed on all the latest technologies and industry trends; healthy curiosity to evaluate, understand, and utilize new technologies. · Must be able to provide leadership to technology team while managing multiple tasks and responsibilities. · Excellent communication and presentation skills for interactions with technology team members, SBU stakeholders, company leadership, partners. Show more Show less

Mobile App Developer. Location : Hubli/ Bangalore. Experience : 4-7 years. Job Type : Freelancer (3 months contract)/ Full-time. About Us Vegam Solutions is a leading IT product company that provides innovative solutions that empower businesses to achieve their goals. Our Smart Factory Solutions are designed to offer seamless integration and unmatched functionality, catering to a diverse range of manufacturing industries. Role Overview We are seeking a passionate and highly motivated Mobile App Development Freelancer to join our team. The freelancer will play a key role in developing a mobile application that communicates with BLE (Bluetooth Low Energy) sensors to download and visualize data. This is an exciting opportunity to work on a real-world IoT project, gaining hands-on experience in BLE communication, mobile app development, and data visualization. Key Responsibilities Develop a mobile app for Android and/or iOS to interface with BLE sensors. Implement BLE communication protocols, including data discovery, pairing, and data transfer. Parse, format, and store data from BLE sensors in a structured format. Design and develop intuitive user interfaces for viewing and analyzing data. Implement secure data transmission and storage. Handle connection drops, retries, and state management efficiently. Work closely with cross-functional teams to align app functionality with business requirements. Conduct testing on real devices and simulators to validate performance and stability. Provide documentation and support for the developed features. Required Skills And Qualifications Programming Languages : Proficiency In The Following Phonegap/Cordova (for both Android/iOS). Html, css, javascript, knockout.js, jQuery. SQLite mobile db. Mobile App Development Strong understanding of mobile app lifecycle and state management. Experience in developing mobile application using phonegap /cordova and build it for both android and iOS platforms. Bluetooth Low Energy (BLE) Basic understanding of BLE architecture and communication protocols (GATT, Characteristics, Services). Experience or interest in implementing BLE scanning, connection, and data transfer. Data Handling And Parsing Ability to process and format data received from BLE devices. Experience with local storage solutions (SQLite). UI/UX Development Experience with data visualization (Highcharts). Testing And Debugging Familiarity with device testing tools and debugging techniques. Android Studio Emulator. Xcode Simulator. Preferred Qualifications Previous experience working on IoT or sensor-based projects. Familiarity with handling background processes and data synchronization. Understanding of data security and encryption in mobile apps. Experience with Git version control. What We Offer Hands-on experience in a cutting-edge IoT project. Flexible working hours and remote working options. Opportunity to work on real-world products with direct customer impact. (ref:hirist.tech) Show more Show less

Key Responsibilities Development : Design and develop complex document templates and layouts using SmartCOMM tools, including Communication Designer, Template Editor, Data Model Designer, and Interactive Editor. Integrate SmartCOMM with external systems (e.g., Guidewire, Salesforce, Duck Creek, etc.) via APIs or batch processing. Configure and maintain Data Models, Data Transforms, Content Rules, and Layout Mappings. Collaborate with business analysts to understand business requirements and translate them into technical solutions using SmartCOMM. Optimize performance and ensure best practices in document generation and rendering. Testing Create and execute unit tests, functional tests, and regression tests for SmartCOMM communications. Conduct end-to-end testing including data input, template rendering, and output validation (PDF, email, SMS, etc.). Work with QA teams to identify bugs and ensure smooth releases. Validate integrations with upstream/downstream systems using XML/JSON data files. Maintain test documentation, test cases, and traceability matrices. Support & Collaboration Provide technical support for SmartCOMM configurations during development and post-go-live phases. Participate in agile ceremonies such as stand-ups, sprint planning, and retrospectives. Document solutions and contribute to knowledge sharing and continuous improvement initiatives. Technical Skills SmartCOMM Tools : Communication Designer Template Editor Data Model Designer Layout Designer Interactive Communications Document Output Formats PDF, Word, Email, SMS Languages & Markup XML, XSLT, JSON, HTML, CSS Integration Skills REST/SOAP APIs, File-based integrations (batch mode) Testing Tools JIRA, Zephyr, Postman, SOAP UI, SmartCOMM Preview and Simulator Version Control Git, Bitbucket, SVN CI/CD & DevOps Jenkins, Azure DevOps, GitHub Actions (preferred) Others Experience with insurance platforms (Guidewire/Duck Creek), or CRM (Salesforce) is a plus. Qualifications Bachelors degree in Computer Science, Information Technology, or a related field. 36 years of hands-on experience in SmartCOMM development and testing. Strong understanding of customer communications management (CCM) platforms. Solid analytical and problem-solving skills. Strong attention to detail and ability to multitask. Excellent communication and documentation skills. Preferred Certifications (Nice To Have) SmartCOMM Developer Certification ISTQB Certified Tester Agile/Scrum Certification What We Offer Opportunity to work on next-generation communication solutions. Flexible working environment with strong learning and development support. Competitive salary, benefits, and performance-based incentives. Work with industry leaders in insurance, healthcare, or BFSI sectors (ref:hirist.tech) Show more Show less

Job Description Summary Control engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts departmental operations and responsible for Tendering/execution. The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The current role is expected to deliver ITO/OTR for HVDC&AC Grid projects. Strong fundamental competency on projects on HVDC,EHV/HV Designs of Grid substation (AIS & GIS) is pre-requisite. Job Description Roles and Responsibilities: Protection coordination design and validation, control, protection, and sequencing strategy specifications, parameters tuning to meet grid stability criteria specified in customer technical specifications. Defining control system requirements for the software architecture, development, and verification Performing PSSE/PSCAD and PSSE/RSCAD Power system network conversion, modelling, and verification, Prepare RSCAD model and perform study on Real Time Digital Simulator (RTDS) model FACTS project. Plant modelling in various simulation tools (MATLAB, RSCAD, PSCAD etc) and its verification, dynamic performance studies using both offline and online simulation tools Design and develop substation control philosophies, protection single-line diagrams (SLD), as well as control and protection, and SCADA systems, auxiliary supply systems, and associated equipment. Develop and implement control and protection schemes for substation systems, including engineering BOQ, drawings, calculations, and technical specifications for both tender and execution stages. Collaborate with other functions to integrate control and protection systems into overall project designs. Strong understanding of electrical power systems, including generators, transformers, switchgear, and transmission lines. Ability to use control and protection software tools such as relay coordination software, and simulation programs. Deploy Engineering tools (CAD, PDM/DMS) as per project requirements. Knowledge of various protection schemes including overcurrent, differential, distance, and busbar protection. Ability to analyze and interpret relay settings, coordination curves, and fault records. Excellent problem-solving skills and the ability to troubleshoot complex electrical issues. Effective communication and teamwork skills to collaborate with internal and external stakeholders. Integrate EHS requirements based on project Strategy and deploy HAZID (Hazard identification) sessions at different project phases. Engineering management skills to handle engineering tasks, timelines, and resources efficiently. Deliver high technical quality of GE’s proposals in LV Secondary side including processes & programs that make the proposals more accepted (compliant or clarified), effective, and cost competitive to the customer with reduced overall-performance risk. Responsible for technical proposal accuracy including technical specifications & clarifications/ assumptions/ exceptions, quantifying design and deliverables, installation work scope definition, cost allocation, bill of materials, and estimation of engineering, installation and testing/commissioning based on customer specifications and/or industry standards (IEEE, NESC, ANSI, NEMA, IEC, etc.), sourcing, and historical data. Perform basic studies in LV Secondary side and necessary to verify proper specification and design of proposed solutions. Provide technical support to create subcontractors and power equipment bid packages. Design and implement methodologies, templates, and libraries that provide the most accurate cost estimates with the least amount of engineering effort for a given customer scope. Write technical specifications for LV and Control/Protection and services, working with PM’s & Sourcing to manage quotes and vendor responses. Work with the Proposal Manager, Engineering team, and assigned multi-discipline engineers to provide up to full “Engineer, Procure, & Construct” estimates for HV Substations, conventional utility, industrial, & renewable substations, P&C and equipment programs, Systems & Communications projects, and BOP projects including FACTS, HVDC Segments Required Qualifications Bachelor of Electrical Engineering or relevant educational degree. Fluency in English is mandatory At least 3 years experiences on substation integration design, with minimum 5 years experiences in substation protection, control and auxiliary system design. Power system behaviors and application of protection to power systems. Protection, Control and interlocking schematic, cubicle layout design, manufacturing and testing. Relevant IEC/IEEE standards for substation design. Experience in modelling of converters for FACTS/HVDC/ drives is considered as an advantage. Knowledge of RTDS/RSCAD will be an added advantage. Knowledge of waveform and fault analysis Able to interpretate and work with HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc. including undertaking Dynamic Performance Studies and Protection co-ordination. Sound knowledge of Transmission and Distribution protection, control, and auxiliary products. Familiar with substation automation system interfaces. Good command of secondary engineering tools (AutoCAD, Engineering Base). Experience with project risk management, financial processes, and global tendering requirements. Familiar with project technical management processes, preferably in a multi-disciplinary team’s context with multiple interfaces First experience in managing subcontracted design work package (preferably externally) Technical leadership and mentoring good technical communication skills. Strong interpersonal skills Desired Qualifications Experience in technical problem solving. Ability to deliver under pressure in a dynamic, fast-paced environment with a problem-solving mindset and attention to detail. Willingness to travel globally and work in diverse environments. Able to work to deadlines with high quality, sense of urgency and delivery. Additional Information Relocation Assistance Provided: No Show more Show less

Job Description Summary Control engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts departmental operations and responsible for Tendering/execution. The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The current role is expected to deliver ITO/OTR for HVDC&AC Grid projects. Strong fundamental competency on projects on HVDC,EHV/HV Designs of Grid substation (AIS & GIS) is pre-requisite. Job Description Roles and Responsibilities: Protection coordination design and validation, control, protection, and sequencing strategy specifications, parameters tuning to meet grid stability criteria specified in customer technical specifications. Defining control system requirements for the software architecture, development, and verification Performing PSSE/PSCAD and PSSE/RSCAD Power system network conversion, modelling, and verification, Prepare RSCAD model and perform study on Real Time Digital Simulator (RTDS) model FACTS project. Plant modelling in various simulation tools (MATLAB, RSCAD, PSCAD etc) and its verification, dynamic performance studies using both offline and online simulation tools Design and develop substation control philosophies, protection single-line diagrams (SLD), as well as control and protection, and SCADA systems, auxiliary supply systems, and associated equipment. Develop and implement control and protection schemes for substation systems, including engineering BOQ, drawings, calculations, and technical specifications for both tender and execution stages. Collaborate with other functions to integrate control and protection systems into overall project designs. Strong understanding of electrical power systems, including generators, transformers, switchgear, and transmission lines. Ability to use control and protection software tools such as relay coordination software, and simulation programs. Deploy Engineering tools (CAD, PDM/DMS) as per project requirements. Knowledge of various protection schemes including overcurrent, differential, distance, and busbar protection. Ability to analyze and interpret relay settings, coordination curves, and fault records. Excellent problem-solving skills and the ability to troubleshoot complex electrical issues. Effective communication and teamwork skills to collaborate with internal and external stakeholders. Integrate EHS requirements based on project Strategy and deploy HAZID (Hazard identification) sessions at different project phases. Engineering management skills to handle engineering tasks, timelines, and resources efficiently. Deliver high technical quality of GE’s proposals in LV Secondary side including processes & programs that make the proposals more accepted (compliant or clarified), effective, and cost competitive to the customer with reduced overall-performance risk. Responsible for technical proposal accuracy including technical specifications & clarifications/ assumptions/ exceptions, quantifying design and deliverables, installation work scope definition, cost allocation, bill of materials, and estimation of engineering, installation and testing/commissioning based on customer specifications and/or industry standards (IEEE, NESC, ANSI, NEMA, IEC, etc.), sourcing, and historical data. Perform basic studies in LV Secondary side and necessary to verify proper specification and design of proposed solutions. Provide technical support to create subcontractors and power equipment bid packages. Design and implement methodologies, templates, and libraries that provide the most accurate cost estimates with the least amount of engineering effort for a given customer scope. Write technical specifications for LV and Control/Protection and services, working with PM’s & Sourcing to manage quotes and vendor responses. Work with the Proposal Manager, Engineering team, and assigned multi-discipline engineers to provide up to full “Engineer, Procure, & Construct” estimates for HV Substations, conventional utility, industrial, & renewable substations, P&C and equipment programs, Systems & Communications projects, and BOP projects including FACTS, HVDC Segments Required Qualifications Bachelor of Electrical Engineering or relevant educational degree. Fluency in English is mandatory At least 3 years experiences on substation integration design, with minimum 5 years experiences in substation protection, control and auxiliary system design. Power system behaviors and application of protection to power systems. Protection, Control and interlocking schematic, cubicle layout design, manufacturing and testing. Relevant IEC/IEEE standards for substation design. Experience in modelling of converters for FACTS/HVDC/ drives is considered as an advantage. Knowledge of RTDS/RSCAD will be an added advantage. Knowledge of waveform and fault analysis Able to interpretate and work with HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc. including undertaking Dynamic Performance Studies and Protection co-ordination. Sound knowledge of Transmission and Distribution protection, control, and auxiliary products. Familiar with substation automation system interfaces. Good command of secondary engineering tools (AutoCAD, Engineering Base). Experience with project risk management, financial processes, and global tendering requirements. Familiar with project technical management processes, preferably in a multi-disciplinary team’s context with multiple interfaces First experience in managing subcontracted design work package (preferably externally) Technical leadership and mentoring good technical communication skills. Strong interpersonal skills Desired Qualifications Experience in technical problem solving. Ability to deliver under pressure in a dynamic, fast-paced environment with a problem-solving mindset and attention to detail. Willingness to travel globally and work in diverse environments. Able to work to deadlines with high quality, sense of urgency and delivery. Additional Information Relocation Assistance Provided: No Show more Show less

Job Description Summary Control engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts departmental operations and responsible for Tendering/execution. The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The current role is expected to deliver ITO/OTR for HVDC&AC Grid projects. Strong fundamental competency on projects on HVDC,EHV/HV Designs of Grid substation (AIS & GIS) is pre-requisite. Job Description Roles and Responsibilities: Protection coordination design and validation, control, protection, and sequencing strategy specifications, parameters tuning to meet grid stability criteria specified in customer technical specifications. Defining control system requirements for the software architecture, development, and verification Performing PSSE/PSCAD and PSSE/RSCAD Power system network conversion, modelling, and verification, Prepare RSCAD model and perform study on Real Time Digital Simulator (RTDS) model FACTS project. Plant modelling in various simulation tools (MATLAB, RSCAD, PSCAD etc) and its verification, dynamic performance studies using both offline and online simulation tools Design and develop substation control philosophies, protection single-line diagrams (SLD), as well as control and protection, and SCADA systems, auxiliary supply systems, and associated equipment. Develop and implement control and protection schemes for substation systems, including engineering BOQ, drawings, calculations, and technical specifications for both tender and execution stages. Collaborate with other functions to integrate control and protection systems into overall project designs. Strong understanding of electrical power systems, including generators, transformers, switchgear, and transmission lines. Ability to use control and protection software tools such as relay coordination software, and simulation programs. Deploy Engineering tools (CAD, PDM/DMS) as per project requirements. Knowledge of various protection schemes including overcurrent, differential, distance, and busbar protection. Ability to analyze and interpret relay settings, coordination curves, and fault records. Excellent problem-solving skills and the ability to troubleshoot complex electrical issues. Effective communication and teamwork skills to collaborate with internal and external stakeholders. Integrate EHS requirements based on project Strategy and deploy HAZID (Hazard identification) sessions at different project phases. Engineering management skills to handle engineering tasks, timelines, and resources efficiently. Deliver high technical quality of GE’s proposals in LV Secondary side including processes & programs that make the proposals more accepted (compliant or clarified), effective, and cost competitive to the customer with reduced overall-performance risk. Responsible for technical proposal accuracy including technical specifications & clarifications/ assumptions/ exceptions, quantifying design and deliverables, installation work scope definition, cost allocation, bill of materials, and estimation of engineering, installation and testing/commissioning based on customer specifications and/or industry standards (IEEE, NESC, ANSI, NEMA, IEC, etc.), sourcing, and historical data. Perform basic studies in LV Secondary side and necessary to verify proper specification and design of proposed solutions. Provide technical support to create subcontractors and power equipment bid packages. Design and implement methodologies, templates, and libraries that provide the most accurate cost estimates with the least amount of engineering effort for a given customer scope. Write technical specifications for LV and Control/Protection and services, working with PM’s & Sourcing to manage quotes and vendor responses. Work with the Proposal Manager, Engineering team, and assigned multi-discipline engineers to provide up to full “Engineer, Procure, & Construct” estimates for HV Substations, conventional utility, industrial, & renewable substations, P&C and equipment programs, Systems & Communications projects, and BOP projects including FACTS, HVDC Segments Required Qualifications: Bachelor of Electrical Engineering or relevant educational degree. Fluency in English is mandatory At least 3 years experiences on substation integration design, with minimum 5 years experiences in substation protection, control and auxiliary system design. Power system behaviors and application of protection to power systems. Protection, Control and interlocking schematic, cubicle layout design, manufacturing and testing. Relevant IEC/IEEE standards for substation design. Experience in modelling of converters for FACTS/HVDC/ drives is considered as an advantage. Knowledge of RTDS/RSCAD will be an added advantage. Knowledge of waveform and fault analysis Able to interpretate and work with HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc. including undertaking Dynamic Performance Studies and Protection co-ordination. Sound knowledge of Transmission and Distribution protection, control, and auxiliary products. Familiar with substation automation system interfaces. Good command of secondary engineering tools (AutoCAD, Engineering Base). Experience with project risk management, financial processes, and global tendering requirements. Familiar with project technical management processes, preferably in a multi-disciplinary team’s context with multiple interfaces First experience in managing subcontracted design work package (preferably externally) Technical leadership and mentoring good technical communication skills. Strong interpersonal skills Desired Qualifications Experience in technical problem solving. Ability to deliver under pressure in a dynamic, fast-paced environment with a problem-solving mindset and attention to detail. Willingness to travel globally and work in diverse environments. Able to work to deadlines with high quality, sense of urgency and delivery. Additional Information Relocation Assistance Provided: No

Job Description Summary Control engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts departmental operations and responsible for Tendering/execution. The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The current role is expected to deliver ITO/OTR for HVDC&AC Grid projects. Strong fundamental competency on projects on HVDC,EHV/HV Designs of Grid substation (AIS & GIS) is pre-requisite. Job Description Roles and Responsibilities: Protection coordination design and validation, control, protection, and sequencing strategy specifications, parameters tuning to meet grid stability criteria specified in customer technical specifications. Defining control system requirements for the software architecture, development, and verification Performing PSSE/PSCAD and PSSE/RSCAD Power system network conversion, modelling, and verification, Prepare RSCAD model and perform study on Real Time Digital Simulator (RTDS) model FACTS project. Plant modelling in various simulation tools (MATLAB, RSCAD, PSCAD etc) and its verification, dynamic performance studies using both offline and online simulation tools Design and develop substation control philosophies, protection single-line diagrams (SLD), as well as control and protection, and SCADA systems, auxiliary supply systems, and associated equipment. Develop and implement control and protection schemes for substation systems, including engineering BOQ, drawings, calculations, and technical specifications for both tender and execution stages. Collaborate with other functions to integrate control and protection systems into overall project designs. Strong understanding of electrical power systems, including generators, transformers, switchgear, and transmission lines. Ability to use control and protection software tools such as relay coordination software, and simulation programs. Deploy Engineering tools (CAD, PDM/DMS) as per project requirements. Knowledge of various protection schemes including overcurrent, differential, distance, and busbar protection. Ability to analyze and interpret relay settings, coordination curves, and fault records. Excellent problem-solving skills and the ability to troubleshoot complex electrical issues. Effective communication and teamwork skills to collaborate with internal and external stakeholders. Integrate EHS requirements based on project Strategy and deploy HAZID (Hazard identification) sessions at different project phases. Engineering management skills to handle engineering tasks, timelines, and resources efficiently. Deliver high technical quality of GE’s proposals in LV Secondary side including processes & programs that make the proposals more accepted (compliant or clarified), effective, and cost competitive to the customer with reduced overall-performance risk. Responsible for technical proposal accuracy including technical specifications & clarifications/ assumptions/ exceptions, quantifying design and deliverables, installation work scope definition, cost allocation, bill of materials, and estimation of engineering, installation and testing/commissioning based on customer specifications and/or industry standards (IEEE, NESC, ANSI, NEMA, IEC, etc.), sourcing, and historical data. Perform basic studies in LV Secondary side and necessary to verify proper specification and design of proposed solutions. Provide technical support to create subcontractors and power equipment bid packages. Design and implement methodologies, templates, and libraries that provide the most accurate cost estimates with the least amount of engineering effort for a given customer scope. Write technical specifications for LV and Control/Protection and services, working with PM’s & Sourcing to manage quotes and vendor responses. Work with the Proposal Manager, Engineering team, and assigned multi-discipline engineers to provide up to full “Engineer, Procure, & Construct” estimates for HV Substations, conventional utility, industrial, & renewable substations, P&C and equipment programs, Systems & Communications projects, and BOP projects including FACTS, HVDC Segments Required Qualifications: Bachelor of Electrical Engineering or relevant educational degree. Fluency in English is mandatory At least 3 years experiences on substation integration design, with minimum 5 years experiences in substation protection, control and auxiliary system design. Power system behaviors and application of protection to power systems. Protection, Control and interlocking schematic, cubicle layout design, manufacturing and testing. Relevant IEC/IEEE standards for substation design. Experience in modelling of converters for FACTS/HVDC/ drives is considered as an advantage. Knowledge of RTDS/RSCAD will be an added advantage. Knowledge of waveform and fault analysis Able to interpretate and work with HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc. including undertaking Dynamic Performance Studies and Protection co-ordination. Sound knowledge of Transmission and Distribution protection, control, and auxiliary products. Familiar with substation automation system interfaces. Good command of secondary engineering tools (AutoCAD, Engineering Base). Experience with project risk management, financial processes, and global tendering requirements. Familiar with project technical management processes, preferably in a multi-disciplinary team’s context with multiple interfaces First experience in managing subcontracted design work package (preferably externally) Technical leadership and mentoring good technical communication skills. Strong interpersonal skills Desired Qualifications Experience in technical problem solving. Ability to deliver under pressure in a dynamic, fast-paced environment with a problem-solving mindset and attention to detail. Willingness to travel globally and work in diverse environments. Able to work to deadlines with high quality, sense of urgency and delivery. Additional Information Relocation Assistance Provided: No