1. To assist leads during the execution of the project. 2. Able to deliver complete areas of design work under supervision of leads. 3. Able to manage design changes autonomously. 4. Seeks technical guidance on complex and unusual problems. 5. Has specialized knowledge of components and their functions. 6. May conduct simple standardized calculations. 7. Able to work within project time restraints. 8. Has some exposure to construction. 9. Has a perspective of work involvement for the next three months. 10. Makes suggestions to improve (design) processes and designs. 11. Takes care of interfaces with other disciplines. 12. Checks other Designers work and progress. 13. Provides on-the-job technical guidance to other juniors. 14. Any other relevant activities as defined by the Lead/Manager. Show more Show less
Position: Electrical Engineer Experience Required: Minimum 5 to 18 years Technical Skills: a. Proficient in MS Office b. Proficient in AutoCAD c. Experience with lighting design software (e.g., Chamlite, Optiwin, Luxicon, etc.) d. Familiarity with power system study software (ETAP preferred) e. Experience with heat tracing calculation software (preferable) f. Familiarity with document control systems (preferable) g. Basic knowledge of 3D design software tools (preferable) Roles and Responsibilities: a. Ability to read and understand project specifications and scope of work b. Familiar with relevant international standards c. Able to read tender documents and attend pre-bid meetings d. Capable of preparing and reviewing FEED (Front-End Engineering Design) documents e. Skilled in preparing/reviewing design basis documents, equipment specifications, data sheets, bid evaluations, and procurement documents f. Experienced in project estimation and bidding g. Proficient in preparing and checking: HT and LT cable sizing and cable schedules Load lists and equipment lists Single line diagrams and schematics Control and indication schedules Lighting calculations and lighting distribution schedules Loop diagrams, block diagrams, interconnection diagrams Equipment data sheets and I/O lists h. Ability to lead engineering and design teams i. Capable of reviewing 3D models in Navisworks j. Strong problem-solving skills for both inter-discipline and intra-discipline coordination k. Responsible for the quality of engineering documents and 3D models Show more Show less
Position: Electrical Designer Experience Required: Minimum 8 to 18 years Technical Skills: a. Proficient in 2D drafting tools (AutoCAD) b. Experienced with 3D design tools such as E3D or PDMS c. Familiarity with Navisworks Simulate d. Knowledge of document control systems Roles and Responsibilities: a. Familiarity with relevant international standards b. Ability to read and understand project specifications and Scope of Work (SOW) c. Capable of reviewing tender and pre-bid documents, budgeting, and assessing software requirements for modeling and drafting tasks d. Ability to lead and guide the entire design team e. Competent in reading and understanding engineering documents f. Strong communication skills with the ability to interact effectively with other disciplines and clients g. Participation in internal and external model reviews h. Proficient in checking electrical layouts and installation drawings i. Review and validation of Material Take-Offs (MTOs) j. Review of vendor documents k. Basic understanding of PDMS/E3D administration activities l. Responsible for ensuring the quality of design documents and 3D models produced by the design team Show more Show less
To assist leads during the execution of the project. Able to deliver complete areas of design work under supervision of leads. Able to manage design changes autonomously. Seeks technical guidance on complex and unusual problems. Has specialized knowledge of components and their functions. May conduct simple standardized calculations. Able to work within project time restraints. Has some exposure to construction. Has a perspective of work involvement for the next three months. Makes suggestions to improve (design) processes and designs. Takes care of interfaces with other disciplines. Checks other Designers work and progress. Provides on-the-job technical guidance to other juniors. Any other relevant activities as defined by the Lead/Manager. Show more Show less
JOB TITLE:Engineering Interface Co-ordinator Role Purpose Responsible for managing overall interface activities involved in the project, quality control, management reporting, risk planning etc. To maintain effective project governance, processes, and systems to be utilized throughout project and meeting the Company's requirements. Building and managing effective relationships across multiple interfaces to achieve optimum performance outcomes. Identifying and managing key risks throughout project, recommending appropriate solutions. Key Tasks And Responsibilities Overall technical stewardship of multi-disciplinary team drawn from engineering function. Ability to assimilate, organize and integrate information from numerous sources and communicate effectively with internal project and external teams and stakeholders. Focal point of contact with Customer’s Interface manager / Project Manager / Discipline Leads. Drive timely receipt of input data / exchange of information from customers, required to produce project deliverables within schedule. Review & facilitate manpower plan and timely availability. Drive quality adherence and system compliance. Drive collaboration and delivery. Drive effective implementation of change order management procedure/strategy. Effective manpower utilization. Facilitate quality delivery on time. Identify specific construction and installation needs and incorporate the same. Ensure the interfaces (Interdisciplinary 3D model clashes, Tie-in Locations, Vendor interface, Topside to Marine interface, etc.) are formally closed and approved by all parties before the design is frozen. Review/update 3D model maturity for various stages i.e. 30%, 60% and 90% and ensure closure of comments recorded through various model reviews. Monitor, update and record revision and status of interfaces. Maintain and update the interface registers that are planned on the project. Review the engineering deliverables and coordinate with other disciplines to ensure adherence to interface agreements. Produce and maintain appropriate, standardized documents and regular reporting to the senior management and other stakeholders reflecting key issues, resolutions, and performance to enable them to effectively understand risks and impacts on the project. Ensure a collaborative approach is maintained across the team to facilitate the planning and delivery of interface works, ensuring all issues are clearly understood by teams and addressed, and appropriate interventions developed and implemented. Managing internal and external stakeholder relationships. Assisting in review and finalization of overall Project Schedules, Progress monitoring and expediting. Requirements Required Qualifications: Master’s Degree / bachelor’s degree with 11+ years of relevant experience in Oil & Gas Projects. Seasoned professional with broad project management experience. Should be able to manage different processes & technical aspects of Large Projects. Benefits New position.
As a candidate for this position, you should hold a BE/Diploma in Instrumentation and possess a minimum of 12 to 18 years of relevant experience in the discipline. You should demonstrate proficiency in using software such as E3D, PDMS, and AutoCAD. Your responsibilities will include understanding the Project Guidelines, project Standards, and applicable International codes and standards. You will need to plan effectively, delegate tasks, monitor progress, and maintain control over the project. Additionally, you will be responsible for training, coaching, and developing staff members. You should have the ability to engage directly with the Client for project-related discussions and queries. Reviewing construction documents like Cable tray layouts, hook-up diagrams, and data sheets will be crucial aspects of your role. You will also be expected to review vendor documents related to the design interface. Supporting continuous improvement and change management efforts within the team will be essential. You will play a key role in ensuring that policies, procedures, and processes are effectively implemented and communicated to the workgroup.,
JOB TITLE:Engineering Interface Co-ordinator Role Purpose Responsible for managing overall interface activities involved in the project, quality control, management reporting, risk planning etc. To maintain effective project governance, processes, and systems to be utilized throughout project and meeting the Company's requirements. Building and managing effective relationships across multiple interfaces to achieve optimum performance outcomes. Identifying and managing key risks throughout project, recommending appropriate solutions. Key Tasks And Responsibilities Overall technical stewardship of multi-disciplinary team drawn from engineering function. Ability to assimilate, organize and integrate information from numerous sources and communicate effectively with internal project and external teams and stakeholders. Focal point of contact with Customer’s Interface manager / Project Manager / Discipline Leads. Drive timely receipt of input data / exchange of information from customers, required to produce project deliverables within schedule. Review & facilitate manpower plan and timely availability. Drive quality adherence and system compliance. Drive collaboration and delivery. Drive effective implementation of change order management procedure/strategy. Effective manpower utilization. Facilitate quality delivery on time. Identify specific construction and installation needs and incorporate the same. Ensure the interfaces (Interdisciplinary 3D model clashes, Tie-in Locations, Vendor interface, Topside to Marine interface, etc.) are formally closed and approved by all parties before the design is frozen. Review/update 3D model maturity for various stages i.e. 30%, 60% and 90% and ensure closure of comments recorded through various model reviews. Monitor, update and record revision and status of interfaces. Maintain and update the interface registers that are planned on the project. Review the engineering deliverables and coordinate with other disciplines to ensure adherence to interface agreements. Produce and maintain appropriate, standardized documents and regular reporting to the senior management and other stakeholders reflecting key issues, resolutions, and performance to enable them to effectively understand risks and impacts on the project. Ensure a collaborative approach is maintained across the team to facilitate the planning and delivery of interface works, ensuring all issues are clearly understood by teams and addressed, and appropriate interventions developed and implemented. Managing internal and external stakeholder relationships. Assisting in review and finalization of overall Project Schedules, Progress monitoring and expediting. Requirements Required Qualifications: Master’s Degree / bachelor’s degree with 11+ years of relevant experience in Oil & Gas Projects. Seasoned professional with broad project management experience. Should be able to manage different processes & technical aspects of Large Projects. Benefits New position.
The Electrical Designer position requires a minimum of 8 to 18 years of experience in the field. As an Electrical Designer, you should be proficient in 2D drafting tools like AutoCAD and have experience with 3D design tools such as E3D or PDMS. Additionally, familiarity with Navisworks Simulate and knowledge of document control systems is essential for this role. Your roles and responsibilities as an Electrical Designer include being familiar with relevant international standards, adept at reading and understanding project specifications and Scope of Work (SOW), and capable of reviewing tender and pre-bid documents. You will also be responsible for budgeting, assessing software requirements for modeling and drafting tasks, and leading and guiding the design team. It is crucial that you have the competence to read and understand engineering documents and possess strong communication skills to interact effectively with other disciplines and clients. Moreover, you will participate in internal and external model reviews, proficiently check electrical layouts and installation drawings, review and validate Material Take-Offs (MTOs), and review vendor documents. A basic understanding of PDMS/E3D administration activities is required, and you will be accountable for ensuring the quality of design documents and 3D models produced by the design team.,
Sidvin in hiring for a Consultant Design Engineer on direct contract to be based in Bengaluru. Job Responsibilities Include Understanding the scope of work, Project documentation, Standards & Guidelines Able deliver the task assigned by leads within schedule Should be familiar with P&ID,PFD etc. Should be capable of preparing documents like Instrument index, I/O List, Datasheets, Specification, Material Requisitions, TBE, Cable Schedule, interconnection diagram, Loop Drawings, etc. Requirements BE Instrumentation with 3 - 6 years of experience in Oil & Gas industry preferably in Offshore Fixed Platforms / FPSO.
Position: Instrumentation Engineer Qualification: B.E. / B.Tech in Instrumentation Experience: Minimum 10+ years of relevant experience Technical Skills & Responsibilities: Proficient in software tools such as SPI, Aveva Instrumentation, Navisworks (added advantage). Knowledge of valve sizing, flow elements , and use of sizing software such as InstruCalc . Perform all aspects of conventional design engineering and analysis. Prepare Engineering Design Basis for instruments and review P&IDs . Review and develop engineering documents including Instrument Index, I/O List, Datasheets, Specifications, Material Requisitions, TBEs, C&E Matrix, Control Narratives, Cable Schedules, Interconnection Diagrams, Loop Drawings , etc. Review vendor documents and coordinate with design and interdisciplinary teams to ensure smooth design interface. Ability to review and work on all Instrumentation activities such as Datasheets, RFQs, TBEs, MTOs, Terminations, Loop Drawings , etc. Experience in design, review, and follow-up of vendor packages (Instrumentation/Mechanical). Ensure compliance with relevant International Standards . Leadership & Team Responsibilities: Provide technical guidance to project teams and disciplines. Manage assigned budget, schedule, and quality requirements . Plan, delegate, monitor progress, and control team deliverables to meet project schedules. Lead, train, coach, and mentor team members; ensure workload balance and cross-disciplinary coordination. Actively engage with clients to understand requirements, maintain strong relationships, and align project goals. Implement and communicate policies, procedures, and processes effectively within the team. Support performance management processes, mentoring, recognition, and corrective actions where required.
Instrumentation Engineer Qualification: B.E. / B.Tech in Instrumentation Experience: Minimum 10+ years of relevant experience Technical Skills & Responsibilities: Proficient in software tools such as SPI, Aveva Instrumentation, Navisworks (added advantage). Knowledge of valve sizing, flow elements , and use of sizing software such as InstruCalc . Perform all aspects of conventional design engineering and analysis. Prepare Engineering Design Basis for instruments and review P&IDs . Review and develop engineering documents including Instrument Index, I/O List, Datasheets, Specifications, Material Requisitions, TBEs, C&E Matrix, Control Narratives, Cable Schedules, Interconnection Diagrams, Loop Drawings , etc. Review vendor documents and coordinate with design and interdisciplinary teams to ensure smooth design interface. Ability to review and work on all Instrumentation activities such as Datasheets, RFQs, TBEs, MTOs, Terminations, Loop Drawings , etc. Experience in design, review, and follow-up of vendor packages (Instrumentation/Mechanical). Ensure compliance with relevant International Standards . Leadership & Team Responsibilities: Provide technical guidance to project teams and disciplines. Manage assigned budget, schedule, and quality requirements . Plan, delegate, monitor progress, and control team deliverables to meet project schedules. Lead, train, coach, and mentor team members; ensure workload balance and cross-disciplinary coordination. Actively engage with clients to understand requirements, maintain strong relationships, and align project goals. Implement and communicate policies, procedures, and processes effectively within the team. Support performance management processes, mentoring, recognition, and corrective actions where required.
As a candidate for this position, you will be expected to have a BE/Diploma in Instrumentation with a minimum of 10 to 18 years of relevant experience in the discipline. You should be proficient in using software such as E3D, PDMS, and AutoCAD. Your key responsibilities will include: - Understanding the Project Guidelines, project Standards, and relevant International codes and standards. - Planning, delegating tasks, monitoring progress, and maintaining control. - Training, coaching, and developing staff members. - Directly interacting with the Client for project-related discussions and queries. - Reviewing construction documents like Cable tray layouts, hook-up diagrams, etc. - Reviewing data sheets and vendor documents related to the design interface. - Supporting continuous improvement and change management efforts. - Ensuring effective implementation and communication of policies, procedures, and processes within the workgroup. If any additional details about the company are provided in the job description, they should be included here.,