1249 Safety Management Jobs - Page 49

Role & responsibilities Responsible for safeguarding the Centre from all fire related threats and ensure preparedness for any emergency situation. Be responsible for centrally coordinating and managing on a day to day basis. Frequently check fire and security systems for proper operation. Ensure compliance with established rules and regulations Provide effective support to the team to enable them to use right equipment and in correct manner.

Develop and implement project-specific safety plans, procedures, Conduct thorough risk assessments and hazard analyses for project sites, equipment, and activities.and protocols in compliance with regulatory requirements and industry standards,

Job Description Safety Specialist Contractor Safety Management Reporting To Project Safety Manager/ Lead Educational Qualification Required BE -Mechanical /Electrical/Chemical/Civil etc., + ADIS/PDIS or Similar safety qualification Experience Required Quantity: Around 10 years He should have project safety management experience. Must have hands on experience on green field / brown field projects Purpose of the Position: To ensure implementation of contractor safety management through developing/Implementing Contractor safety management procedure, setting expectation during onboarding of contractors and On field contractor safety performance monitoring. He is responsible for successfully implementing CSM procedure at AM/NS with a support and coordination of all Contractor safety committee Key Role & Responsibility: To conduct on boarding meeting with the contractor owner /incharges along with Engineer incharges to verify fulfilment of contract safety clauses for supply of materials and manpower and obtain agreement for implementation of all safety system in their activities during the project To facilitate evaluation of competence of critical activities through other safety specialist, i.e WAH, Lifting and rigging, electrical and RA(Safety officers) To provide advice on the matters related to carrying out project safety inspections at the sites. To identify training needs for contractor workers and coordinate training through Trainers To schedule contractor safety audit and coordinate for conducting periodical audit through contractor safety committee To obtain safety observations on contractor and evaluate their performance To obtain near miss reporting/incident reporting from contractor and monitor implementation of investigation recommendation Participate in Contractor safety meeting and raise high severity points related to implementation of contractor safety procedures To obtain monthly MIS from the contractor and review their safety performance and develop contractor safety das board Organise various safety promotion activities for contractors as per the advice of project safety Manager To implement progressive consequence management procedure as per CSM Provide inputs to management on strengthening the over all contractor safety management system To prepare and submit weekly/Monthly MIS to Project Safety manager END

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : SAP Environment Health & Safety Management Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Lead, you will lead the effort to design, build, and configure applications, acting as the primary point of contact. You will be responsible for overseeing the application development process and ensuring successful project delivery. Roles & Responsibilities: Expected to be an SME Collaborate and manage the team to perform Responsible for team decisions Engage with multiple teams and contribute on key decisions Provide solutions to problems for their immediate team and across multiple teams Lead the application development process Ensure timely project delivery Provide guidance and support to team members Professional & Technical Skills: Must To Have Skills:Proficiency in SAP Environment Health & Safety Management Strong understanding of SAP EH&S modules Experience in configuring and customizing SAP EH&S solutions Knowledge of SAP EH&S regulatory compliance requirements Hands-on experience in SAP EH&S implementation Good To Have Skills:Experience with SAP S/4HANA integration Additional Information: The candidate should have a minimum of 5 years of experience in SAP Environment Health & Safety Management This position is based at our Bengaluru office A 15 years full-time education is required Qualifications 15 years full time education

TechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and global collaboration and we want you to be part of it. Youll be joining a culture that values curiosity, expertise, and ideas as well as diversity, inclusion, and authenticity. Bring your unique energy to our team of more than 20,000 people worldwide, and discover a rewarding, fulfilling, and varied career that you can take in anywhere you want to go. Job Purpose Ensure assembly and test operating tasks and activities within time frame in agreement with the objectives fixed in term of performance, quality, and safety OR Ensure supervision of a team of assemblers Job Description Assembles, tests, paints surface components following highly complex specifications Assists others during assembly of components in area of expertise. Resolves routine questions and problems in mastered subassemblies. Refers more complex issues to higher levels. Completes required test documentation including test reports, failed test reports and Non-Conformance Reports (NCR). Uses material handling equipment to move parts, components and subassemblies from one work or storage area to another as required. Understand and follow all safety requirements and procedures Act as a referent for most complex assembly and test activities You are meant for this job if: Technical Bachelor Degree 2 - 3 years of experience

Job Purpose Ensure assembly and test operating tasks and activities within time frame in agreement with the objectives fixed in term of performance, quality, and safety OR Ensure supervision of a team of assemblers Job Description Assembles, tests, paints surface components following highly complex specifications Assists others during assembly of components in area of expertise. Resolves routine questions and problems in mastered subassemblies. Refers more complex issues to higher levels. Completes required test documentation including test reports, failed test reports and Non-Conformance Reports (NCR). Uses material handling equipment to move parts, components and subassemblies from one work or storage area to another as required. Understand and follow all safety requirements and procedures Act as a referent for most complex assembly and test activities You are meant for this job if: Technical Bachelor Degree 2 - 3 years of experience

Safety Officer Qualification: ME / B.E Experience: 5 to 9 yrs Work Location: Chennai Should be from Automotive background (MANDATORY) Should have experience in ISO Implementation Implement standard Systems and ISO IF YOU ARE INTERESTED TO APPLY FOR THIS JOB SHARE YOUR RESUME TO careers@leadhr.net Contact No: 99406 32343

mplement and configure SAP EHS module to meet organizational needs. Ensure compliance with all relevant regulatory requirements. Identify, assess, and manage environmental, health, and safety risks. Provide training and support to end-users on SAP EHS functionalities. Develop and maintain EHS documentation and reporting. Collaborate with various departments to integrate EHS practices into operations. Monitor and audit EHS performance to identify areas for improvement. Stay updated with latest EHS regulations and industry best practices.

remote typeOn-site locationsGurugram, HRMumbai, MH time typeFull time posted onPosted 4 Days Ago job requisition idREQ398526 Safety CultureDriving a Good catch / Near Miss Program and Publish best practices via Monthly Dashboard TrainingDeveloping HSE training plan and coaching the team on HSE topics Contractor Safety ManagementPeriodic inspections during the contractors performing the activity on site. Site inspections of All Hyd sites. Emergency Mock DrillsBased on Building risk level, Establish Annual planner and conduct 2 scenarios per quarter. Coordination and Interaction with stakeholders (Mock drills and 3rd party assessments) to articulate & advice the stakeholders on the right solutions for stakeholders team. Once agreed, develop and monitor the implementation program. Minor Works - Creation of SOPs, monitoring and governance of the HSE practices followed by all relevant parties including 3rd party contractors and suppliers ComplianceProviding assistance on regulatory norms (NBC) and other regulations. Work Permits - To review the PTW and Safe Work Method Statement Minor WorksHSE Assessment for the Upcoming Capex Projects 3rd Party AuditsCoordinate and Track closure of observations (As & when required) Incident ManagementReview RCA & CAPA on all EHS incidents Risk RegisterIdentify & review mitigation plans for site specific risk register (Monthly) Establish Annual HSE Plan and report performance metrics during MMRs & QMRs. Location On-site Gurugram, HR, Mumbai, MH Scheduled Weekly Hours: 48 . Jones Lang LaSalle (JLL) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process including the online application and/or overall selection process you may contact us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL.

remote typeOn-site locationsHyderabad, TS time typeFull time posted onPosted 2 Days Ago job requisition idREQ424769 Position: Fire Officer, Business Property and Asset Management, Hyderabad What this job involves You will oversee and ensure environmental health & safety at your site. You will use the assigned apparatus and follow the command structure instructions for fire suppression or a related emergency service. Your duties will involve: Performing equipment set-up upon arrival at a fire scene. Dispatching and accompanying ERT (Emergency response team). Preparing plans and executing (fire and life safety) evacuation drills and other fire safety related trainings to the team members and occupants available in the premises. Completing appropriate rescue, firefighting and salvage operations at a fire scene. Using established procedures to determine if individuals are trapped within a burning facility and taking appropriate actions to secure their rescue. Performing the lift evacuation and rescue drill periodically. Securing affected structure to prevent rekindling. Taking inventory of all equipment after suppression has been achieved, recording all equipment, which must be left at the site and incident report. Attending and providing information for pre-fire planning studies and maintaining an updated knowledge of pre-fire plans. Liaison with Government authorities for periodic renewal of the NOCs. Report and maintain record of all the incidents of site. Keep all the checklists and records updated related to Fire equipments maintenance and training records. Reporting: You will be reporting to the Property Manager as the case may be. Sound like you? Here is what were looking for: Being Analytical and Meticulous You will ensure that all fire and life safety systems installed in the premises are working in an effective and efficient manner; and provide criteria on determining the number or type of fire equipments needed in a given area. Qualifications You will have a Diploma/Degree in Fire Engineering OR Fire Safety with work experience of 3-5 years. If you have a good knowledge of current fire suppression and firefighting techniques along with knowledge of the principles and practices involved in emergency medical services, you will be our preferred candidate. What we can do for you: At JLL, Apply Today! Location On-site Hyderabad, TS Scheduled Weekly Hours: 48 . Jones Lang LaSalle (JLL) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process including the online application and/or overall selection process you may contact us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL.

remote typeOn-site locationsHyderabad, TS time typeFull time posted onPosted Today job requisition idREQ428479 Project Engineer Project and Development Services What this job involves: Maintaining smooth site operations Maintaining seamless and orderly site operations will be your main agenda every day. In this role, you will take on various site-related tasks, such as solving site design problems, managing construction works and keeping timesheets and records for reporting purposes. Aside from these, you will also see to it that the projects comply with corresponding occupational health and safety legislations, standards and codes of practice. Likewise, you will prepare and manage the implementation of the Project Management Project Safety Plan. Are you comfortable facing people on a daily basis? Part of your job is to assemble and lead a team of experts and bring out the best in each member. You will constantly coordinate with key stakeholders, and manage subcontractors and suppliers. You will carry out negotiations with contractors and suppliers as well. Creating lasting client relationships What value do you place on relationships? At JLL, we prioritise client satisfaction above everything elsea virtue that has given us a solid, reputable image for more than 200 years. As the person in charge, you will uphold this passion for customer care by understanding our clients business needs and constraints. Representing the client during the projects stagesfrom construction to completionand oversee the processes throughout the projects duration will be an important part of your job. Aside from these, you will also represent and promote JLL throughout the project; and ensure that we meet company profit targets set for the project. Sound like you? To apply you need to be: Proven expertise in site management An ideal candidate is a certified professional in a building-related discipline, with significant experiences in site supervision. A solid background in various relevant sectorsincluding residential, commercial, hotels, industrial and retail fitoutmay also help you win the job. Apply today and lets discuss. Leadership skills above par This role calls for a high level of competence to bring out the best that we has to offer. As the person in charge, you will need to demonstrate willingness and ability to improve existing competencies. Likewise, are expected to exhibit a strong willingness to learn the ropes of the job. You will also need to have superior interpersonal and communications skills to effectively delegate tasks and motivate contractors. Do you have what it takes to be an exceptional leader? If yes, we are more than happy to take you aboard. What we can do for you: At JLL, we make sure that you become the best version of yourself by helping you realize your full potential in an entrepreneurial and inclusive work environment. We will empower your ambitions through our dedicated Total Rewards Program, competitive pay and benefits package. Apply today! Location On-site Hyderabad, TS Scheduled Weekly Hours: 48 . Jones Lang LaSalle (JLL) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process including the online application and/or overall selection process you may contact us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL.

remote typeOn-site locationsHyderabad, TS time typeFull time posted onPosted 3 Days Ago job requisition idREQ427851 What this job involves: Putting safety firstalways This challenging yet exciting role puts you in the driving seat of our efforts to build and maintain an environmentally sustainable, healthy and safe workplace. Youll provide safety support to all projects, ensuring they all meet our own established standards and that of local safety regulations. Specifically, youll conduct safety review meetings with project and design team at the initial stage of the project. As well, youll ensure that all high-risk activities have proper safety work method statement (SWMS). Additionally, youll promote workplace safety by performing site inspections, risk reports, timely safety-related corrections, and weekly safety meetings. Youll also constantly coordinate with the project manager and operations manager to ensure that everybody will be out of harms way. Promoting safety awareness Getting everyone on board our environment, health and safety initiatives falls on your shoulders. To do you, you need to create awareness and educate our people and stakeholders. Youll achieve this through consistent sharing of success stories and best practices among project JLL teams, and also by doing regular mentoring and coaching of our safety officers and non safety professionals. Another step would be obtaining the relevant professional licenses and ensuring they stay up-to-date. Sound like you? To apply, you need to have: Education and experience An ideal candidate holds a solid healthy, safety and environmental (HSE) background, and has at least 10 years experience in construction safety. You are also a safety license holder, with a proven track record in providing safety trainings. We also expect you to be well versed in project safety systems, processes, tools and best practicesultimately, applying such sources in the delivery of flawless projects. An eye for detail Well expect you to be good at identifying, and devising measures to meet, our stakeholders business needs and requirements. Having strong written and spoken communication skills are vital and, of course, youll be good at building team relationshipsthat is, listening to your team and being open to suggestions and knowledge exchangeand interacting effectively with business partners. What we can do for you: At JLL, we make sure that you become the best version of yourself by helping you realize your full potential in an entrepreneurial and inclusive work environment. We will empower your ambitions through our dedicated Total Rewards Program, competitive pay and benefits package. Apply today! Location On-site Hyderabad, TS Scheduled Weekly Hours: 48 . Jones Lang LaSalle (JLL) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process including the online application and/or overall selection process you may contact us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL.

Roles & Responsibilities: Position Overview The Secretary of the Central Safety Council is responsible for overseeing key safety processes, implementation of The Mahindra Safety Way (TMSW), safety trainings, and facilitating a culture of zero accidents through rigorous analysis and spreading best practices. Key responsibilities are: Process Ownership: Lead the implementation of The Mahindra Safety Way (TMSW) and it s continuous improvement Coordinate the Safety Rise Awards for recognition of outstanding safety practices and results Work closely with the TMW team for conducting GCPP assessments and providing feedback Safety Facilitation: Facilitate zero accidents target through data-driven analysis and adherence to Life Saving Principles. Develop and promote safety best practices across Group companies. Training and Consultation: Provide training and consultation on safety management to employees Consultation to Group companies to implement Safety compliances and best practices Collaboration and Communication: Plan and execute the annual Safety Conclave, bringing together safety leaders and experts to share knowledge and strategies. Work closely with other businesses to integrate safety into all operations. Reporting and Coordination: Investigation of serious safety incidents in coordination with businesses and horizontal deployment of corrective actions across the Group. Prepare the Quarterly Group Safety Report for Leadership. Future readiness: Scan external environment for new safety standards; Creating new common standards for Group and deploy for future readiness. Proactively spread emerging digital safety solutions to overcome safety challenges. Additional Requirements Technical Skills: Strong understanding of safety regulations and standards. Good understanding of Safety best practices Proficiency in conducting safety assessments and reports Excellent analytical and problem-solving skills. Soft Skills: Excellent interpersonal and influencing skills. Excellent training and communication skills Good report writing and written communication abilities. Ability to work collaboratively with diverse / cross functional teams. High level of integrity and ethical standards. PERSONAL PROFILE:- Educational Qualifications: - Engineer with Advanced Diploma in Safety Management. Experience :- Minimum 20 years experience in operations and safety management, with around 4 years in a Safety Head role in a large manufacturing organisation. Proven track record of developing and implementing safety programs in a large organization is essential. Other Requirements: The position requires extensive travel to various Group sites

Role & responsibilities Implement EHS standards according to Shapoorji Pallonji EHS Standards and contract requirements for the project. Develop health and safety plans ensuring compliance with legal, customer, and organizational guidelines. Implement and monitor EHS Management Systems as per ISO 14001 and ISO 45001 standards, including corporate and customer requirements. Identify workplace hazards and establish control measures including but not limited to Electrical works Installation, testing & commissioning), Hot Work, Height Work, Civil Work, Mechanical and manual material handling, confined space, machine safety. Ensure the use of Personal Protective Equipment (PPE) and the availability of safety equipment on project sites. Guide and train site personnel on EHS practices and safety protocols. Identify training needs and coordinate EHS training programs across different levels. Conduct EHS assessments, identify unsafe acts, conditions, near misses, and ensure prompt corrective and preventive actions. Investigate incidents and recommend corrective actions to the Project Manager Preferred candidate profile Diploma / Degree in Engineering with Diploma in Industrial Safety from state Board 8-13 Years of Experience

Project Role : Application Developer Project Role Description : Design, build and configure applications to meet business process and application requirements. Must have skills : SAP Environment Health & Safety Management Good to have skills : NA Minimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Developer, you will design, build, and configure applications to meet business process and application requirements. A typical day involves collaborating with team members to understand project needs, developing innovative solutions, and ensuring that applications function seamlessly within the existing infrastructure. You will engage in problem-solving discussions, contribute to the overall project strategy, and adapt to evolving requirements while maintaining a focus on quality and efficiency. Roles & Responsibilities: Expected to perform independently and become an SME. Required active participation/contribution in team discussions. Contribute in providing solutions to work related problems. Assist in the documentation of application processes and workflows. Engage in continuous learning to stay updated with industry trends and technologies. Professional & Technical Skills: Must To Have Skills: Proficiency in SAP Environment Health & Safety Management. Strong understanding of application development methodologies. Experience with integration of safety management systems. Familiarity with regulatory compliance and risk management processes. Ability to troubleshoot and resolve application issues effectively. Additional Information: The candidate should have minimum 3 years of experience in SAP Environment Health & Safety Management. This position is based at our Mumbai office. A 15 years full time education is required. Qualification 15 years full time education

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : SAP Environment Health & Safety Management Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Lead, you will lead the effort to design, build, and configure applications, acting as the primary point of contact. Your day will involve overseeing the application development process and ensuring seamless communication within the team and stakeholders. Roles & Responsibilities: Expected to be an SME Collaborate and manage the team to perform Responsible for team decisions Engage with multiple teams and contribute on key decisions Provide solutions to problems for their immediate team and across multiple teams Lead the application development process Ensure effective communication within the team and stakeholders Professional & Technical Skills: Must To Have Skills: Proficiency in SAP Environment Health & Safety Management Strong understanding of SAP EHSM modules Experience in configuring and customizing SAP EHSM solutions Knowledge of SAP EHSM integration with other SAP modules Hands-on experience in leading SAP EHSM implementation projects Additional Information: The candidate should have a minimum of 5 years of experience in SAP Environment Health & Safety Management This position is based at our Hyderabad office A 15 years full-time education is required Qualification 15 years full time education

About the position: The Safety Specialist Technical projects is responsible for ensuring compliance with Health, Safety, and Environment (HSE) regulations, company procedures and standards, conducting hazard analyses, and providing transactional HSE support and guidance to the Technical Projects team, including the delivery of all HSE management system deliverables and resourcing requirements within cross-functional teams. This position will primarily support technical projects in Phase 1 through Phase 5. This position will report to the Workforce Safety Team Lead within the HSE function of the Chevron ENGINE in Bengaluru, India. Key Responsibilities: Provide day-to-day support to the Technical Project team, including coordination and facilitation of risk assessments (HAZIDs) and/or support the development of ALARP statements and Key Decision Sheets. Ensure that all technical project activities comply with HSE related regulatory requirements, company procedures and standards, and other applicable safety regulations. Stay updated on changes in safety standards and implement necessary updates to company procedures. Develop, update, and communicate significant injury and fatality prevention programs specific to technical projects crews and contractors. Utilize IT tools for analysis of data and trends to identify hazards, root causes, and areas of improvement to provide actionable insights to enhance workplace safety. Perform hazard analyses for technical projects activities, identifying potential hazards and recommending control measures to mitigate risks. Review safety training requirements for technical projects staff and execution contractors, ensuring all personnel are trained/qualified for the activity and are informed about proper safety procedures, personal protective equipment (PPE) use, and emergency protocols. Support incident investigation and reporting of any incidents, accidents, or near-misses related to technical projects activities, identify root causes, and assist in the development and implementation of corrective actions. Manage and ensure the proper usage of the permit-to-work system, especially for high-risk technical projects tasks such as isolation of hazardous energy, confined space entry, lockout/tagout (LOTO), and hot work. Collaborate with the emergency response team to develop and update emergency procedures relevant to technical projects activities, ensuring the team is prepared for potential incidents. Ensure that all external contractors performing technical projects work comply with the company s safety policies and procedures, through routine audit of training and competency records and, for execution contractors an audit of a sample of eCoW records. Maintain detailed safety records, including training logs, inspection reports, incident reports, and corrective actions in the correct system of record. (e.g., MyPass, Impact, etc.) Identify opportunities to improve technical projects safety processes, reduce workplace hazards, and promote a proactive safety culture. Required Qualifications: Bachelor s degree in Occupational Health and Safety, Industrial Hygiene, Engineering, or a related field. Experience in safety management, preferably in technical projects or industrial environments. In-depth knowledge of regulatory regulations, particularly related to technical projects activities, including safety in design, isolation of hazardous energy, hot work, confined space entry, and hazard communication. Experience conducting safety risk analysis, safety training and implementing safety management systems. Strong analytical skills with the ability to identify and mitigate risks. Excellent communication skills and the ability to collaborate with cross-functional teams. Proficiency in Microsoft Office Suite and safety management software. Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Provides technical guidance on a wide range of personnel safety issues including the identification of risks, safeguards, and associated assurance activities. Manages the execution of all facets of Control of Work, including Managing Safe Work (MSW), Contractor Health Environment and Safety Management (CHESM), Motor Vehicle Safety (MVS), and other workforce safety programs. Provides workforce safety guidance and support to operations. Teams with technical safety specialists to develop Safety in Design for new and modified facilities. About the position: The Safety Specialist Maintenance is responsible for ensuring that work planning for maintenance activities builds in compliance with Health, Safety, and Environment (HSE) regulations, Control of Work standards and includes identification of HSE safeguards. This role is required to understand and align with the Front-End Loading and Planning to Execution models, to provide early HSE input during long range and detailed planning phases of maintenance activities. The role will work within cross functional teams within ENGINE and with business unit personnel. This position will report to the Workforce Safety Team Lead within the HSE function of the Chevron ENGINE in Bengaluru, India. Key responsibilities: Ensure that all maintenance activities comply with HSE related regulatory requirements, company standards and procedures, and other applicable safety regulations. Stay updated on changes in safety standards and implement necessary updates to maintenance work planning practices. Provide HSE input into maintenance work packs. Develop, update, and communicate safety and health aspects and safeguards specific to each workpack to maintenance crews and contractors. Utilize IT tools for analysis of safety and health data associated with maintenance activities and trends to identify hazards, root causes, and areas of improvement to provide actionable insights to enhance workplace safety. Facilitate hazard analyses (HAZIDs) for maintenance activities as required, identifying potential hazards and collaborating with stakeholders to recommend control measures to mitigate risks. Support efforts to prevent incidents with a focus on eliminating significant incidents and fatalities through providing guidance to field HSE, V&V Coaches and contractor crews on implementation and execution of safeguards for maintenance scopes. Develop safety training and/or communication briefings for maintenance staff and contractors, ensuring all employees are informed about proper safety procedures, personal protective equipment (PPE) use, and emergency protocols relevant to each scope of work. Support incident investigation and reporting of any incidents, or near-misses related to maintenance activities, identify root causes, and assist in the development and implementation of corrective actions. Schedule and conduct audits of the permit-to-work (electronic Control of Work) system after work completion, especially for high-risk maintenance tasks such as confined space entry, lockout/tagout (LOTO), and hot work, and identify trends. In conjunction with the Maintenance Planners, perform post job debriefs. Collaborate with the emergency response team to develop and update emergency procedures relevant to maintenance activities, ensuring the team is prepared for potential incidents. Ensure that contractor work crews performing maintenance work comply with the company s safety policies and procedures, by routine audit of contractor training records (MyPass), COEM field feedback data, COEM assurance data and eCoW completion records. Maintain detailed safety records, including training logs, inspection reports, incident reports, and corrective actions in the correct System of record (e.g., eCOEM, II&R etc.). Identify opportunities to improve maintenance safety processes, reduce workplace hazards, and promote a proactive safety culture. In conjunction with the Data Reporting team, develop routine presentations for asset leadership on maintenance activity HSE performance. Required Qualifications: Bachelor s degree in Occupational Health and Safety, Industrial Hygiene, Engineering, or a related field Experience in safety management, preferably in maintenance or industrial environments In-depth knowledge of Human and Organizational Performance principles and their application in an industrial environment In-depth knowledge of regulatory regulations, particularly related to maintenance activities, including isolation of hazardous energy, hot work, confined space entry, and hazard communication Experience conducting safety training and implementing safety management systems Qualifications and/or experience in safety management system auditing Strong analytical skills with the ability to identify and mitigate risks Excellent communication skills and the ability to collaborate with cross-functional teams Proficiency in Microsoft Office Suite and safety management software Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

As we continue to grow, so does our commitment to protecting our people, supporting our teams, and building a culture where safety and well-being come first from the field, to manufacturing, to the office, and everywhere in between. Were building something special: A proactive, people-first safety culture, A growing team of passionate professionals making a real impact, A place where your career can grow. If youre as driven by purpose as you are by performance and you re looking to be part of a safety-forward team check out our Health and Safety jobs. We re always on the lookout for smart, mission-minded people who care deeply about the work and the people behind it. We are seeking a dynamic Health and Safety Director to lead the Health & Safety team in the Asia, Africa and Middle Eastern Countries. Develops, implements, and monitors company occupational health and safety programs and policies to ensure compliance with all applicable regulations and policies. Develops training, providing guidance and consultation on topics such as emergency response, hazardous material handling, industrial hygiene, life safety, fall protection, ergonomics and Fleet Safety Recommends and implements corrective actions to eliminate or mitigate hazards. Promotes awareness of EHS culture and programs through communication and collaborative team interaction. Required Qualifications Fluent business English skills (Written and spoken). Demonstrated experience implementing EHS management systems (Safety Management software) Proven success in reducing workplace injuries and driving prevention initiatives . Expertise in developing and delivering training across varied audiences and geographies. Exceptional leadership, communication, and project management skills. Ability to travel in Asia, Africa and the Middle East as needed (30%) Bachelors Degree or equivalent work experience required. Typically has 10-12 years of experience in Environmental, Health and Safety and typically 4-6 years leadership experience. Fluent business English skills (Written and spoken). #LI-DD1 Design and implement a comprehensive global health and safety strategy , aligning with company goals and international standards. Lead the development and deployment of health and safety management systems , ensuring they are scalable, effective, and compliant with applicable regulations and ISO standards (e.g., ISO 45001). Drive global initiatives focused on injury reduction and prevention , including ergonomics, fleet safety and proactive hazard identification. Champion Prevention by Design principles , collaborating with engineering, operations, and facilities teams to integrate safety early in project and workplace design processes. Sets strategy, goals and metrics for assigned areas. Compiles and analyzes statistical data and trends relating to EHS compliance and operational effectiveness. Ensures that support activities meet or exceed established cost, time and quality standards. Engages with client stakeholders to evaluate outcomes, success and improvement opportunities. Captures lessons learned and ensures their application to future project planning and process improvement.

Job Description Manager Environmental Health & Safety Property and Asset Management What this job involves: Making workplace safety a top priority Safety and security are among the most important aspects of running a business—and JLL’s workplace safety measures are among the most lauded in the real estate industry. To uphold this image, the person in charge will focus mainly on monitoring workplace safety through total compliance with government and local regulations. You’ll be on top of all projects involving fire and thermal energy within or in close proximity to the property, and ensure that safety standards are religiously followed to ensure a risk-free work environment. Reporting to the property manager, you’ll also keep a close look at all documentations and records that need updating. Performing routine audits and inspections will also be within your scope. In this role, you’ll comb through our systems and panels for potential issues. Likewise, you’ll carry out crisis management duties during emergencies, and may even work with authorities to keep the situation confined. Promoting safety standards to clients, team What we’re looking for is an expert who can effectively influence others toward a common goal of maintaining a healthy and safe workplace. In this role, you’ll work closely with the clients and the EHS team in implementing a comprehensive energy management program that identifies risk factors. Aside from this, you’ll also be responsible for promoting our own health and safety standards across the board. You must also ensure that our contractors adhere to established safety standards. Your expertise in relationship building will also be handy as you’ll spearhead EHS trainings, support incident investigations, and identify opportunities for improvement. Sound like you? To apply you need to have: Top-level expertise in health and safety As the person in charge, you must have a degree in Environmental Science, and at least three years’ experience in managing EHS tools and systems across complex, multisite properties. It is also highly desirable to have Lead Auditor Qualifications, Chartered Membership of the Institute of Occupational Safety and Health (CMIOSH) certification or any other equivalent. An in-depth understanding of international safety standards is also a big plus. Likewise, the ideal candidate must demonstrate proficiency in root cause analysis, management system auditing and EHS-related research. You must also show a flair for reports and presentations—providing smart insights and developing policies when needed. Passion for delivering excellent service As the person in charge, you’ll demonstrate superior communication skills to earn the trust and respect of colleagues and clients—and ultimately, usher them toward a common goal of maintaining a risk-free workplace. Likewise, you are a results-driven leader with impeccable organizational skills and superior business acumen. You must also have excellent negotiation skills and expert-level background in policies, codes of practice and operating procedures. Furthermore, you must demonstrate an ability to work both independently and with a group. A proven capacity to handle multicultural teams is also a big plus. What we can do for you: At JLL, we make sure that you become the best version of yourself by helping you realise your full potential in an entrepreneurial and inclusive work environment. We will empower your ambitions through our dedicated Total Rewards Program, competitive pay and benefits package. Apply today! Contact : 9880612200

We are seeking a Project Supervisor with 2–4 years of experience to handle on-site execution and coordination for interior projects. Candidates with a background in Interior Design or Civil Engineering are preferred. Required Candidate profile Male, with 2–4 years of site execution experience. Diploma/Degree in Interior Design or Civil Engineering. Skilled in multitasking, communication, and site management. Proficient in MS Excel

To provide information, technical advice and support to all project team members on HSE related matters and to undertake regular review, inspections and audit to sustain the HSE standards in the project. Functional Relationships: Be an active member of site team and provide support and advice on HSE related matters. Actively participate on site related HSE activities and involve other site team members. Being a subject matter expert, focus on continuous development and growth of business. Key Functional Areas Undertake duties as directed by the Operations Manager & City Senior Safety Lead. Ensure the Project Safety Plan is maintained and adopted on site. Undertake regular review of HSE performance in the project and work with site team to ensure that HSE standards are communicated and followed on site. Conduct regular HSE inspections at site and circulate the report. Recommend for improvements and provide corrective actions for implementations. Follow-up on timely closure of Inspection points. Compile and submit monthly HSE Report at the end of each month to the Project Lead and keep track on all HSE statistical data. Establish and communicate site emergency plan and procedures and to carry out review and update in regular intervals. Maintain & assist site team for development of project HS risk assessment. To establish the level of controls before work commences. Monitor that all visitors to the project have signed the site attendance / visitors register and are escorted at all times unless they have been formally inducted. Ensure any hazard / complain raised related to HSE is properly investigated, rectified and closed and recorded on Hazard Report Log. Maintain & monitor the inspection & test plan of all plant & equipments on site. Provide information, technical advice and support to construction teams on HSE related issues. Maintain & disseminate statistical information regarding incidents near misses and injuries to all concerned. Ensure that all incidents occurred on site are reported on timely manners and provide necessary support to site team on incident management. Participate on incident investigation with recommended action plan and timely closure to prevent reoccurrence. Maintain all necessary HSE documents as per process & standards. Provide timely & constructive feedback to project lead on competency level of HSE performance of contractors and vendors on site. Conduct and monitor site HSE training as required for all members on site. To ensure that all latest legislation, code of practices, standards and procedures are communicated to all concerned. Assist site team to review HSE considerations for selection of contractors, subcontractors, vendors and suppliers. Facilitate possible HSE escalations to Operations Managers and City Senior Safety Lead before escalation from client and maintain client relationship. Ensure that team discipline is maintained at site To provide information, technical advice and support to all project team members on HSE related matters and to undertake regular review, inspections and audit to sustain the HSE standards in the project. Functional Relationships: Be an active member of site team and provide support and advice on HSE related matters. Actively participate on site related HSE activities and involve other site team members. Being a subject matter expert, focus on continuous development and growth of business. Key Functional Areas Undertake duties as directed by the Operations Manager & City Senior Safety Lead. Ensure the Project Safety Plan is maintained and adopted on site. Undertake regular review of HSE performance in the project and work with site team to ensure that HSE standards are communicated and followed on site. Conduct regular HSE inspections at site and circulate the report. Recommend for improvements and provide corrective actions for implementations. Follow-up on timely closure of Inspection points. Compile and submit monthly HSE Report at the end of each month to the Project Lead and keep track on all HSE statistical data. Establish and communicate site emergency plan and procedures and to carry out review and update in regular intervals. Maintain & assist site team for development of project HS risk assessment. To establish the level of controls before work commences. Monitor that all visitors to the project have signed the site attendance / visitors register and are escorted at all times unless they have been formally inducted. Ensure any hazard / complain raised related to HSE is properly investigated, rectified and closed and recorded on Hazard Report Log. Maintain & monitor the inspection & test plan of all plant & equipments on site. Provide information, technical advice and support to construction teams on HSE related issues. Maintain & disseminate statistical information regarding incidents near misses and injuries to all concerned. Ensure that all incidents occurred on site are reported on timely manners and provide necessary support to site team on incident management. Participate on incident investigation with recommended action plan and timely closure to prevent reoccurrence. Maintain all necessary HSE documents as per process & standards. Provide timely & constructive feedback to project lead on competency level of HSE performance of contractors and vendors on site. Conduct and monitor site HSE training as required for all members on site. To ensure that all latest legislation, code of practices, standards and procedures are communicated to all concerned. Assist site team to review HSE considerations for selection of contractors, subcontractors, vendors and suppliers. Facilitate possible HSE escalations to Operations Managers and City Senior Safety Lead before escalation from client and maintain client relationship. Ensure that team discipline is maintained at site Location: On-site Bengaluru, KA Scheduled Weekly Hours: 48

As our new Senior Engineer– FLS, Buildings you will be part of our global High-Rise department, Ramboll’s dedicated team of high-rise experts which have designed over 150 tall building projects globally, including some of the most technically challenging. You would be responsible in coordinating with project managers, and/or engineers for FLS work in the High-Rise department in Mumbai and supporting the global department which also has offices in Copenhagen, Dubai and Singapore. Your key tasks and responsibilities will be: Review of architectural and firefighting plans in accordance with applicable fire & life safety codes (i.e., NFPA, Saudi Building code, UAE Fire code) Preparation of fire & life safety strategy reports and provision of proactive advice to clients regarding design compliance Maintaining a high level of professional responsibility in undertaking the required review services Ensuring a high level of communication both verbal and in writing Management of individual projects to ensure each of the necessary deliverable required by clients are met Ensuring a thorough understanding of NFPA 101, NFPA 5000, UAE Fire code, Saudi Fire code and each of the relevant design standards such as NFPA 13, 14, 72, 92 etc Use of all necessary architectural and design software (CAD, Bluebeam) Experienced in CFD modelling and smoke management Qualification Must possess with 8 years of professional experience as fire & life safety engineer out of which minimum 5 years should be in Middle East Projects. Excellent organizational skills, effective time management, including the ability to deal with conflicting demands in order to meet deadlines, prioritize heavy workload and have a willingness to work flexibly. Additional Information Welcome to our Buildings division As one of the top 10 building designers in the world, Ramboll works on more than 10,000 building projects each year. 5,000 experts across the world specialize in creating more innovative, sustainable and liveable buildings. We place particular emphasis on our liveable buildings concept where we balance the cultural, social and physical values of buildings, to improve the quality of life for building users. Ramboll in India Ramboll has more than 1,000 experts working across five offices in India applying their passion to deliver innovative solutions in markets as diverse as Buildings, Transport, Planning & Urban Design, Water, Environment & Health and Energy. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative and empowering culture. How to apply Apply online. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application.

Role & responsibilities Regulatory Compliance: Ensure compliance with all applicable occupational health and safety laws and regulations. Maintain records and documentation as required under Factories Act, Maharashtra Pollution Control Board (MPCB), and other statutory bodies. Risk Assessment & Safety Inspections: Conduct regular safety audits, inspections, and hazard identification. Recommend corrective and preventive actions to mitigate risks. Training & Awareness: Conduct safety induction and periodic training for employees, contractors, and visitors. Promote safety culture through tool-box talks, safety posters, and campaigns. Incident Management: Investigate incidents, near misses, and accidents; prepare reports with root cause analysis and corrective actions. Maintain records of incidents and analyze trends for proactive safety management. Emergency Preparedness: Conduct mock drills (fire, chemical spill, etc.) and ensure availability of emergency response equipment. Maintain first-aid kits, fire extinguishers, and safety PPE inventory. Documentation & Reporting: Prepare safety MIS reports, incident logs, and compliance reports for internal and external audits. Maintain up-to-date MSDS (Material Safety Data Sheets) and SOPs. Coordination & Liaison: Liaise with external agencies such as DISH, MPCB, and Fire Department for audits and inspections. Coordinate with different departments to ensure safe work practices are followed during routine and shutdown activities. Qualification & Experience: Graduate in Science/Engineering with a Diploma in Industrial Safety (recognized under the Factories Act). Minimum 35 years of experience in safety management, preferably in chemical or pharmaceutical manufacturing. Skills Required: Good knowledge of EHS regulations and compliance standards. Strong observation and risk assessment skills. Excellent communication and training abilities. Proficient in documentation and incident reporting.

Assist in development & implementation of EHS policies, procedures & programs. Ensure compliance with all applicable environmental, health & safety regulations.Develop EHS training programs .Conduct regular risk assessments.Exp in power transmission Required Candidate profile Promote awareness & understanding of EHS practices & principles.Investigate accidents, incidents & near-misses to determine root causes & recommend corrective actions.exp in power transmission lines.