88 Pspice Jobs

The System Integrator is responsible to integrate the developed sub-systems according to the system architecture to a whole system and verify the interfaces between the sub-systems. This includes: • Uniting the already integrated hardware-software system with the mechanical system • Specifying the tests for the interfaces between the sub-systems • Performing the tests and reporting the results. The Hardware Tester is responsible for the proper execution of the hardware system tests to ensure the hardware’s degree of maturity in compliance with quality, cost and time goals. The tester is responsible for the execution of the system test and integration tests in accordance to the PDP in order to assure the product degree of maturity in compliance with Quality/Costs/Timings. • Should have experience in automotive product development & testing • Creation of the system integration test specification according to the product requirements and responsible for obtaining the required approvals • Development of a system integration plan & test including regression tests • Execution of system integration tests according to the specification • Supporting the implementation the test strategies • Creation of the system integration test report & Documenting and evaluating test results • Maintenance of the error documentation and transfer of test results to the project team • Support of the analysis of detected failures, ensuring the correct test setup and execution • Supporting optimizing hardware systems based on test results. • Experienced in test specification and performing for complex systems • Test engineering and test equipment (HW, SW, standards, HIL, etc.) • Test automation, methodical testing • CAN, LIN, diagnostics • Configurations management • Robustness testing • EMI/EMC test standards & experience on EMI/EMC testing & meeting compliance • Hardware Testing & Integration • Special tool handling experience – MS-office, DOORS, Config. management, CANoe / LIN • Experienced with tools like DSO, MSO, Vector tools CANoe, Power supply, Spectrum Analyzer, Protocol analyzer, Ltspice, Pspice • Preferred to have experience of HVAC control application Show more Show less

TSClarity Systems (TSCS) is a deep-tech startup at the forefront of India’s self-reliance movement in defense and strategic technologies. Aligned with the Make in India and Atmanirbhar Bharat initiatives, we are pioneering the design and development of state-of-the-art electro-optical systems , including advanced imaging and sensing platforms for defense, aerospace, and industrial applications. As a homegrown innovator, we combine cutting-edge research with indigenous manufacturing to deliver high-performance, mission-critical systems built entirely in India. Join us as we redefine the future of Indian electronics and optical technologies. About the Role: We are seeking a highly skilled and motivated Electronic System Engineer with strong expertise in PCB design experience (2-3yrs) to join our engineering team. This role involves end-to-end design and development of state of the art electronic systems, including schematic capture, PCB layout, system integration, and testing. If you're passionate about electronics and thrive in a collaborative environment, we’d love to hear from you. Responsibilities: Design, develop, and test electronic systems and embedded hardware solutions. Create detailed schematics and perform PCB layout using industry-standard tools (e.g., Altium Designer, Eagle, KiCad). Conduct component selection, signal integrity analysis, and power distribution design. Collaborate with mechanical, firmware, and software teams to ensure system compatibility. Oversee prototyping, testing, and validation of PCB assemblies. Troubleshoot hardware issues and perform design revisions as needed. Prepare design documentation, BOMs, and technical reports. Work with external vendors for fabrication and assembly support. Requirements: Bachelor’s or Master’s degree in Electrical/Electronic Engineering or related field. 3+ years of experience in electronic hardware design and PCB layout. Proficiency with PCB CAD tools (e.g., Altium, OrCAD, KiCad). Solid understanding of analog and digital circuit design. Experience with embedded systems and microcontroller integration is a plus. Knowledge of EMC/EMI compliance, DFM/DFT principles. Strong problem-solving skills and attention to detail. Excellent communication and teamwork skills. Experience in high-speed digital or RF PCB design. Familiarity with simulation tools like LTspice, PSpice, or HyperLynx. Experience with firmware development or basic scripting for automation. What We Offer: Competitive salary and benefits package Opportunity to work on cutting-edge technology A collaborative and innovative engineering culture Career development and growth opportunities How to Apply: Please submit your resume and portfolio (if available) through LinkedIn or email us at tsclaritysystems@gmail.com. Show more Show less

Hello Candidate, We are hiring for a Well-known Indian Product based MNC Position : Senior Hardware Engineer Exp : 6 to 10 Years Location : Gurgaon Notice period : 30 Days / 60 Days Job Type : Fulltime / Direct payroll with company Work Mode : On-site 𝗜𝗳 𝗶𝗻𝘁𝗲𝗿𝗲𝘀𝘁𝗲𝗱, 𝘀𝗵𝗮𝗿𝗲 𝘆𝗼𝘂𝗿 𝗿𝗲𝘀𝘂𝗺𝗲 𝗼𝗻 𝗵𝗿𝟮𝟴@𝘁𝗲𝗰𝗵𝗻𝗼𝗺𝗲𝗰𝗵𝗽𝗹𝗮𝗰𝗲𝗺𝗲𝗻𝘁𝘀.𝗰𝗼𝗺 Hardware Engineer Requirements / pre-requisites: • Hardware design experience in automotive domain is must. • Design experience to comply standards like CISPR25, ISO7637, ISO16750, ISO10605, ISO26262. • Design experience on Analog and digital electronic design like DC-DC power supply, sensors interfaces, microcontrollers, H-bridge etc. • Ability to perform design calculations / simulations using various tools such as Mathcad/PSPICE. • Worst case analysis, Thermal design and parts selection for cost competitive design. • Experience in eBOM management for RFQs. • Thermal design considerations and management at PCB and product level • Hands on experience in all kind of hardware testing including functional testing, environmental testing such as EMI EMC and certification. • Hands on experience in design simulation tools like Altium Designer, Mentor Graphics Xpedition etc. • Expertise in communication protocols like CAN, RS485, RS232, Ethernet, USB, I2C, SPI, UART • Good knowledge on Signal integrity and Power integrity • Good understanding on product development life cycle. • Experience on working with RF interfaces like GSM, LTE, Wi-Fi, BT/BLE, GNSS. • Hands on experience on DFMEA, Reliability calculations. Secondary skill sets: • Excellent organizational and leadership abilities. • Highly analytical mind-set, with an ability to see both the big picture and the details. • Strong communication and presentation skills. Regards!! Aditya Kakade hr28@technomechplacements.com Talent Aquisition Specialist Show more Show less

Job Description: Power Electronics Engineer Project: Energy storage application Experience : 2-5 yrs Salary: As per industry norms About the Role: Power Electronics Engineer will contribute to the development of cutting-edge control schemes and hardware solutions for the Energy storage application. The ideal candidate will possess a strong background in designing, developing, and testing power electronics systems with an emphasis on motor drive solutions, converters, inverters, and energy management systems. Key Responsibilities: Design & Development: Design, simulate, and develop power electronics circuits and systems, including SRM drive converters and control schemes. Develop power electronics solutions for SRM drives, SRM generators, and DC-DC converters. Select appropriate components such as power semiconductor switches and sub-systems. Apply advanced control techniques to optimize system performance and efficiency. Testing & Validation: Conduct in-depth testing and validation of power electronics systems, ensuring alignment with performance, efficiency, and energy integration requirements. Use simulation tools such as MATLAB/Simulink, LTspice, and PSpice to model, simulate, and validate designs. Diagnose and resolve issues related to efficiency, circuit performance, thermal management, and overall system reliability. Documentation & Reporting: Prepare comprehensive technical documentation, including system specifications, test plans, and validation reports, ensuring clarity and precision. Provide clear analysis of test results, offering recommendations for optimization and improvements . Skills and Qualifications: Education: Btech & Mtech in Electrical Engineering, Power Electronics, Electric Drives, or a related field. Experience: Proven experience in power conversion systems, inverters, converters, renewable energy systems, and motor drives. Familiarity with rapid control prototyping tools such as dSPACE, DSP, FPGA, OPAL-RT. and Typhoon is a plus. Technical Skills: Proficiency in simulation, modeling tools such as MATLAB and other tools. Strong knowledge of power semiconductor devices (e.g., MOSFET, IGBT), passive components, magnetic components, converter design, and real-time control techniques. Experience with power electronics systems in energy applications is highly desirable. Show more Show less

*Key Responsibilities:* - *Designing and Developing Hardware Components*: Create detailed schematics, PCB layouts, and technical drawings using CAD software. - *Testing and Validation*: Conduct thorough testing and validation of hardware components to ensure functionality and reliability. - *Collaboration*: Work closely with cross-functional teams, including software engineers, product managers, and manufacturing teams. - *Troubleshooting*: Identify and resolve hardware issues during design and testing phases. - *Project Management*: Manage hardware projects, including project planning, resource allocation, and risk assessment. *Design and Development:* - Develop embedded digital systems incorporating microprocessors and FPGAs. - Design simulations using pSPICE, LTSpice, and other relevant software. - Create technical specifications and diagrams to guide manufacturing and assembly processes. - Optimize hardware designs for cost, performance, and reliability ¹ ² ³. *Requirements and Qualifications:* - Bachelor's degree in Electrical Engineering, Computer Science, or a related field. - Proven experience as a Hardware Design Engineer or in a similar role. - Experience with computer-aided design (CAD) software. - Strong understanding of electronic systems and component materials. - Excellent communication and teamwork abilities ⁴ ⁵. *Nice to Have:* - Experience with IoT design, SMPS, and high-level programming languages like C/C++ and scripting languages like Perl/TCL/Python. - Knowledge of signal processing and data acquisition. - Familiarity with industry standards and regulations ¹ ³. Job Type: Full-time Pay: ₹204,947.50 - ₹979,980.99 per year Schedule: Day shift Application Question(s): Immediat joiner? Work Location: In person

Job description Embedded Hardware Engineer Qualification and Experience : Diploma/Graduate in Electronics/ ENTC/ Instrumentation. 1.5 to 3 years of Work Experience Technical Skills : Hardware Development Skills for Automotive, Defence, Industrial IOT Domains. Strong Analog, Digital and Power Electronics. Fundamentals like MOSFETs, Transistors, IGBTs, Filters, Bulk Boost Converters, , Power Supplies, ADC, Amplifiers, DC-DC Converters Board bring-up and Strong HW Debugging Skills ( Using Oscilloscope Etc.) Knowledge of Hardware Design as per EMI/EMC ( Automotive and Defence ( MIL461) desirable Experience in Product Testing and Certification - Environment, Temperature, EMI/EMC Test, JSS55555 Should have hands on knowledge of ORCAD for Schematic Design & Should be able to review PCB Layout Must have knowledge of Hardware Simulation Tools Like PSPICE , TINA Good to have knowledge of Tools like SVN, JIRA , GIT, MS Office etc Job Type: Full-time Salary: ₹240,000.00 - 800,000.00 per month Schedule: Day shift Education: Diploma , Bachelor’s degree in Electronics, Electronics & Telecommunication (E&TC) Experience: Embedded Hardware: 1 .5 to 2 year (Preferred) Work Location: In person Job Types: Full-time, Permanent Pay: ₹240,000.00 - ₹800,000.00 per year Benefits: Health insurance Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Yearly bonus Ability to commute/relocate: Bavdhan, Pune - 411021, Maharashtra: Reliably commute or planning to relocate before starting work (Preferred) Application Question(s): Current CTC in Lakh/PA? (Please Answer) Notice Period in Months? (Please Answer) How many years of work experience do you have using Embedded Systems?(Please Answer) Work Location: In person

Job Title: Senior Hardware Design Engineer (Power Electronics) Experience: 5+ Years Open Positions: 3 Job Responsibilities: · Design and develop power electronics circuits and systems, including DC/DC and AC/DC converters, motor drivers, and related hardware. · Execute analog and digital circuit design, including signal conditioning, amplification, and filtering. · Perform schematic capture and multi-layer PCB layout using tools such as Altium, Cadence, or Eagle, ensuring manufacturability and testability. · Use simulation tools like LTspice, PSpice for design optimization and signal integrity analysis. · Lead hardware troubleshooting, bring-up testing, and validation using oscilloscopes, logic analyzers, and other lab equipment. · Ensure designs comply with EMI/EMC and regulatory standards. · Collaborate with firmware/software teams for embedded system integration. · Conduct power management and thermal analysis for electronic components. · Prepare and maintain technical specifications, test plans, and detailed reports. · Mentor junior engineers and manage project timelines and deliverables. Job Requirements: · Bachelors or Master’s Degree in Electronics, Electrical Engineering, or a related field. · Minimum 5 years of relevant experience in hardware design, preferably in power electronics. · Proficiency in circuit simulation, PCB design, and lab testing tools. · Strong problem-solving, project management, and communication skills. Job Type: Full-time Pay: ₹400,000.00 - ₹500,000.00 per year Schedule: Day shift Work Location: In person

Power the Future with us! SolarEdge ( NASDAQ: SEDG), is a global leader in high-performance smart energy technology, with over 5000 employees, offices in 34 countries, and millions of products installed in over 133 countries. Our diverse product offering comprises intelligent solar inverters, battery storage, backup systems, EV charging, and complete home energy management ecosystems. By leveraging world-class engineering capabilities and with a relentless focus on innovation, we strive to create a world where clean, green energy from the sun is the primary source of power for our homes, businesses, and just about everywhere we thrive. Our R&D division is growing globally, and we are looking for an experienced Power Electronics Engineer to join our dynamic team at the new R&D site in Bangalore, India. As a Power Electronics Engineer at SolarEdge India R&D, you will play a pivotal role in the design, development, and optimization of power electronics and power electronics systems for our advanced solar energy products. You will be responsible for driving the innovation and technical excellence of our power solutions, contributing to the success of SolarEdge's mission to make solar energy more accessible and efficient. Responsibilities: Design, analysis, and development of advanced power electronics and power systems for SolarEdge's solar energy products, including inverters, power optimizers, and energy storage solutions. Collaborate with cross-functional teams, including electrical engineers, Mechanical Engineers/Designers, PCB Layout Engineers, and firmware developers, to ensure seamless development, integration, and optimization of power systems. Conduct power system studies, such as load flow analysis, transient stability, and harmonic analysis, to assess system performance and reliability. Perform detailed design and analysis of power electronic circuits, ensuring compliance with industry standards and safety regulations. Prepare detailed design documentation, Schematics, BoM, and test procedures. Lead the testing and verification of power electronics and power systems, both in the lab and field, to ensure they meet design specifications and quality standards. Participate in design reviews, providing technical expertise and guidance to the team to drive continuous improvement and innovation. Collaborate with suppliers and manufacturing teams to support the transition of designs from R&D to mass production, addressing any design-related issues during production. Mentor and guide junior engineers, fostering a collaborative and innovative work environment. Requirements: Bachelor’s (B.E/B.Tech) or master’s (M.E./M.Tech) degree in electrical /electronics Engineering with a specialization in Power Electronics or Power Systems. 4+ years of hands-on experience in power electronics design and power system analysis, preferably in the solar energy or renewable energy industry. Strong understanding of power semiconductor devices (Including SiC and GaN), gate drive circuits, and magnetic components used in power converters. Experience with simulation tools (e.g., PSpice, LT SPICE, Simulink etc.) Knowledge of power converter topologies (e.g., DC/DC, DC/AC and AC/DC), including resonant and bi-directional converters and grid-tied inverters. Excellent knowledge of PCB layout rules, considering high-current traces, thermal management, creepage, clearance requirements for HV and LV traces. Ensure compliance with best practices for power distribution, component placement, and impedance control. Implement EMI/EMC best design practices to ensure compliance with regulatory standards. Familiarity with international safety and regulatory standards for power electronics and solar energy products. Excellent problem-solving skills and the ability to troubleshoot and resolve complex technical issues. Strong communication and interpersonal skills to work effectively in a cross-functional team environment. Proven track record of delivering high-quality power electronics designs from concept to production. Results-oriented mindset with a focus on achieving tangible and measurable results. SolarEdge recognizes its talented and diverse workforce as a key competitive advantage. Our business success is a reflection of the quality and skill of our people. SolarEdge is committed to seeking out and retaining the finest human talent to ensure top business growth and performance. Show more Show less

Design and develop power electronics circuits and systems, AC/DC converters, motor drivers Utilize simulation tools (LTspice, PSpice) for design optimization and signal integrity analysis. Please email your CVs to hrd@mic.co.in

Job Description Summary Design, Sizing, Simulation, Lab testing of Power electronic/ Electrical equipment (VSD/ VFD’s). Activities contributing to the design and development of products and solutions LV/MV drive power system fault calculations and sizing various protection components like contactors, isolators, and circuit breakers and basics of arc flash analysis. Includes activities linked to technical improvement of existing products and components Job Description LV/MV Drive Engineering – Core Power Electronics (AC / DC systems) and Control cabinet design as per requirement. Engage in Sizing, product hardware design / loss budget calculation / filter & protection circuits. Familiar with LV/MV drive power system fault calculations and sizing various protection components like contactors, isolators, and circuit breakers and basics of arc flash analysis. Understand product / project specifications and realize requirements to design using calculations, modeling and simulations. Design system/equipment to meet reliability, testing standards, manufacturability, material and cost guidelines Prepare & validate design documents - configurations, principles of operation, application guidelines, specifications, BOM, SLD & drawings as per requirement. Verify functional performance of prototype hardware under all specified operating conditions. Support Manufacturing of equipment at factory / vendor facility. Document functional test requirements and conduct test according to applicable standards (UL/IEC etc.…) /conduct project FAT’s. Coordinate with Lead Engineer and team Manager on product / project execution on a continuous basis. May require travel to commission engineered projects as required. Required Qualifications Bachelors/Master Degree in Engineering (Electrical or Electronics ) Preferred with relevant experience (10-15 yrs) Electrical design / Simulation tools like MATLAB/Simulink, PLECS, PSCAD, PSPICE ,EPLAN / PLM (Team center) tools etc. Desired Characteristics Lead initiatives of moderate scope and impact. Strong oral and written communication skills to influence at all levels. Strong interpersonal and leadership skills. Effective problem solving skills Demonstrate to work independently within and between teams and as an individual. Ability to work effectively in a culturally diverse and highly matrix environment. Ability to energize teams and perceive change as an opportunity About Us GE is an equal opportunity employer and supports diversity. GE (NYSE:GE) drives the world forward by tackling its biggest challenges. By combining world-class engineering with software and analytics, GE helps the world work more efficiently, reliably, and safely. GE people are global, diverse and dedicated, operating with the highest integrity and passion to fulfill GE’s mission and deliver for our customers. www.ge.com GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Disclosure of your Gender or Sexual orientation is completely Voluntary and not mandatory. Note To follow US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. Additional Information Relocation Assistance Provided: Yes Show more Show less

3+ Years 1. Component selection experience in alternate part selection and Schematics preparation. 2. Work experience in Microcontrollers, Analog and digital circuit design 3. Experience in Board level power supply design (On board SMPS Design, Buck, Boost, LDO, Linear) 4. Experience with design Simulation tools: Orcad, LTSpice/PSpice. Schematics tool expertise in Zucken CR8000 is an added advantage. 5. Knowledge of layout guidelines and co-ordinate with Layout design engineers 6. Hands on experience in board bring up and testing 7. Knowledge in communication interfaces like I2C, SPI, UART 8. Basic knowledge of EMI/EMC Standards. Design with EMI/EMC Requirement and design Review from EMI/EMC Perspective. Hands on experience in EMI/EMC Testing. 9. Good communication skills for interaction/meetings with the customer and other support team members. 10. Able to execute the tasks independently.

Roles & Responsibilities: HW Requirement analysis Hardware design, development and debugging Hardware board bring-up and Design validation testing Must have worked in a design environment for complete Hardware development life cycle (HDLC). Must be able to understand & document design requirements at module level & functional level. Good knowledge of Analog, digital and mixed circuit design. Good knowledge of component selection (passives, microprocessor, micro controller, PMIC, Op Amp etc.) Hands on experience on any Schematic and layout design tool like OrCAD, Altium etc. Hands on experience on PSPICE tools like TINA, OrCAD, LTspice Good knowledge of EMI/EMC testing. Must be able to handle BOM stock, online ordering & communicate with vendors for pricing & delivery. Good knowledge of PCB design, Multilayer PCB Design (8-10 Layer) and EMI/EMC compliant PCB layout Basic knowledge of signal integrity, power integrity and High-Speed.

Job Summary We are seeking a Sr. Hardware Engineer with 6 to 10 years of experience in Hardware Architecture. The ideal candidate will be responsible for designing developing and testing hardware components and systems. This role requires a deep understanding of hardware architecture and the ability to work collaboratively with cross-functional teams to deliver high-quality products. Responsibilities Experience in designing Analog Circuits Digital Circuits and Power Supply designs Experience in Design simulate verify analog circuits such as operational amplifiers data converters (ADC/DAC) voltage regulators and filters Experience in Design microprocessors architectural circuit design and different micro-controller circuit designs Exposure to Memory devices (DDR NAND NOR etc..) Familiarity with industry standards for IO (4-20mA HART DI/DO Universal IOs) and industrial standard communications (Ethernet/IP EtherCAT ModBus CAN-FD etc.). Sound Digital design skills and having design knowledge on different communications UART RS422 RS485 I2C SPI CAN USB Ethernet TCP/IP Knowledge in circuit simulators and analysis tools - SPICE PSPICE and HSPICE Experience in different product development stages Manufacturing and EMI/EMC Environmental and Safety Testing and Certifications Familiar with the latest hardware testing equipment oscilloscopes and logic analyzer Familiar with board layout schematic capture vendor interface analysis and simulation. Experience in MTBF DFMEA Derating Analysis. Experience in preparing SyRS HDD HTP BOM etc.. Experience in using Cadence Mentor Altuim. Experience in Signal Integrity and Power Integrity Experience in using Oscilloscopes Function generator Multimeters and other test Equipements Certifications Required Certified Hardware Design Engineer (CHDE) Certified FPGA Designer Show more Show less

The candidate should have background in Design and engineering of electrical and electronic system for mission critical equipment. The candidate should have knowledge of wiring harness and wiring chart generation in tools like E3, Solidworks or AutoCad. The candidate should have knowledge of MIL standards like JSS55555, MIL461, BR3021, EED-Q, etc The candidate should have understanding of sensors and instrumentations The candidate should have expertise in electrical panel design, selection of components, layout development. The candidate should have good interpersonal skills, team player, ready to travel as per project requirements The candidate should have understanding of VME, Vxworks, PLC, SCADA, LINUX. The candidate should be well versed with simulation tools like Pspice, Matlab, Simulink, The candidate should be well versed in making unit level scheme, bill of material, general arrangement drawing, acceptance test procedure. The candidate should be well versed in making system level scheme, bill of material, cable layout. Show more Show less

Job Title : Director – Hardware Engineering Location : Pune Compensation : Up to ₹65 LPA Must have Metering Experience Role Summary Lead end-to-end hardware product development, including power electronics design, system architecture, and deployment. Drive innovation in energy systems aligned with Husk’s mission of rural electrification. Key Responsibilities Lead hardware lifecycle from concept to deployment Design and validate SMPS and power converters (AC-DC, DC-DC) Develop control hardware for high-power battery chargers Ensure compliance with global standards (UL, IEC, IEEE) Conduct DFMEA, FMECA, and reliability analysis Manage documentation, testing, and cross-team collaboration Requirements B.E./B.Tech or M.E./M.Tech in Electrical/Electronics 6+ years in power electronics hardware design Proficient in Altium/OrCAD, PSpice, Embedded C/C++ Strong problem-solving and leadership skills Show more Show less

Responsibilities Create and execute application-level test plans to validate product functionality and performance under various conditions. Develops, modifies, verifies, troubleshoots, and evaluates analog and mixed signal electronic parts, components or integrated circuitry for analog and mixed signal electronic equipment and other hardware systems. Debug and troubleshoot complex customer application issues, proposing practical solutions and workarounds. Develop and present detailed technical documentation, including datasheets, application notes, and white papers. Conduct circuit simulation and analysis to validate designs. Performs signal integrity analysis and parasitic extraction and analysis to identify and minimize issues that could impact circuit performance Assist in the development of reference designs, evaluation boards, and simulations to facilitate product adoption. Minimum Qualifications Bachelor’s or Master’s degree in Electrical Engineering or a related field Minimum of 8-10 years of hands-on experience in analog and mixed-signal applications engineering or a related field. Proficient in analog and mixed-signal circuit design, simulation, and analysis. Strong understanding of key AMS domains, ESD protection devices, and other Analog and mixed signal ICs. Hands-on experience with lab equipment (e.g., oscilloscopes, spectrum analyzers, network analyzers) for debugging and testing. Excellent programming and scripting skills for automation and data analysis (e.g., PSpice, MATLAB, Labview). Demonstrated ability to develop and debug hardware prototypes and evaluation boards. Strong communication and presentation skills, with the ability to explain technical concepts to diverse audiences. Familiarity with semiconductor manufacturing processes and product lifecycle management is a plus. Show more Show less

Job Information Job Opening ID ZR_1692_JOB Date Opened 24/01/2023 Industry Technology Job Type Work Experience 4-6 years Job Title Sr. Hardware Engineer City Noida Province Uttar Pradesh Country India Postal Code 201301 Number of Positions 4 Roles & Responsibilities: HW Requirement analysis Hardware design, development and debugging Hardware board bring-up and Design validation testing Must have worked in a design environment for complete Hardware development life cycle (HDLC). Must be able to understand & document design requirements at module level & functional level. Good knowledge of Analog, digital and mixed circuit design. Good knowledge of component selection (passives, microprocessor, micro controller, PMIC, Op Amp etc.) Hands on experience on any Schematic and layout design tool like OrCAD, Altium etc. Hands on experience on PSPICE tools like TINA, OrCAD, LTspice Good knowledge of EMI/EMC testing. Must be able to handle BOM stock, online ordering & communicate with vendors for pricing & delivery. Good knowledge of PCB design, Multilayer PCB Design (8-10 Layer) and EMI/EMC compliant PCB layout Basic knowledge of signal integrity, power integrity and High-Speed. check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Job Title Senior Hardware Engineer Job Description As a Senior Hardware Engineer for high-volume consumer medical devices, you should be capable of architecting, designing, documenting, and implementing high-quality electronics on multiple platforms across multiple product ranges. This includes but is not limited to: Hardware development using 8-bit micro-controllers up to 32-bit microcontrollers, battery charging circuits, and BLE radios. Document, manage, and help to define/obtain/refine requirements, design docs, design reviews, and verification procedures, Help establish consistent ways of working with respect to embedded system electronics/software/firmware. Requirements: Degree in Electrical or Electronics Engineering.8+ years of experience in electronics hardware development in a professional organization, ideally in the Medical Device industry. Hands-on knowledge of small micro-controllers and analog interfaces. Mastery of oscilloscopes, function generators, power supplies, IDE’s and emulators for debugging and test. Technical leadership skills in a multi-discipline engineering project environment. Understanding of board and system-level technologies and the ability to read, interpret and review analog and digital circuit schematics. Experience with electronics simulation tools such as PSpice. Experience in wireless technologies such as BLE, Wi-Fi, Zigbee, etc. Desirable: Experience in a regulated industry (FDA strongly preferred). Six Sigma Black Belt certification. Experience with Altium and Mentor Graphics tools for PCBA design. Experience in defining, designing, documenting, testing, and implementing embedded firmware for 8-bit up to 32-bit microcontrollers using C. Basic concepts of system architecture, systems engineering, and model-based design. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others. Learn more about our business. Discover our rich and exciting history. Learn more about our purpose. If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here. Show more Show less

Job Responsibilities: Responsible for the hardware circuit design of the brushless DC/BLDC/PMSM motor and the controller of the DC motor, the simulation design and analysis of the core hardware part Responsible for hardware requirement capture, analysis and documentation. Electronic component selection, control circuit schematic design, PCB layout design, and commissioning and testing of single-board components Work with software engineers to complete the commissioning and testing of the motor drive; Responsible for the compilation of project-related technical documents, BOM output and DFEMA; Responsible for Hardware qualification (CVT, DVT and PVT), EMC/EMI certification Lead the development of Hardware design, prototyping and validation quality processes Job requirements: (Please alter the Job requirements as per the JD Please) Bachelor/Master degree, major in motor control, electronics, electrical, automation Familiar with the position sensorless control algorithm of BLDC square wave and sine wave, FOC, space vector control, experience in related projects is preferred Proficient in at least one 16 or 32-bit microcontroller software design; proficient in Infenon or arm cortex software/hardware design is preferred Familiar with Matlab/Simulink modeling and simulation, and proficient in using at least one circuit simulation (Multisim, Pspice, Seber, etc.) software. Experience in applying matlab motor control software to automatically generate is preferred Familiar with automotive electronics, body network (CAN/LIN protocol), experience in related automotive projects is preferred Practical experience with ARM-based SW architecture development for BLDC motor drives Lead complex projects Meet customers to understand and design products according to customers' requirements Share and transfer knowledge to other engineers Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do.

Job Responsibilities: Support for the design of embedded software (C language) for automotive brushless motor products, and participate in the design of the overall system scheme and the determination of software control algorithms Support for the construction of embedded software architecture, code writing and debugging, and system testing Support for product testing and monitoring, design of calibration software Support for the subsequent continuous improvement of product software Support for ASPICE process documentation and auditing for automotive SW projects Job requirements: Bachelor/Master degree, major in motor control, electronics, electrical, automation Familiar with the position sensorless control algorithm of BLDC square wave and sine wave, FOC, space vector control, experience in related projects is preferred Proficient in at least one 16 or 32-bit microcontroller software design; proficient in Infenon or arm cortex software/hardware design is preferred Familiar with Matlab/Simulink modeling and simulation, and proficient in using at least one circuit simulation (Multisim, Pspice, Seber, etc.) software. Experience in applying matlab motor control software to automatically generate is preferred Familiar with automotive electronics, body network (CAN/LIN protocol), experience in related automotive projects is preferred Practical experience with ARM-based SW architecture development for BLDC motor drives Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do.

- Job Responsibilities: Support for the design of embedded software (C language) for automotive brushless motor products, and participate in the design of the overall system scheme and the determination of software control algorithms Support for the construction of embedded software architecture, code writing and debugging, and system testing Support for product testing and monitoring, design of calibration software Support for the subsequent continuous improvement of product software Support for ASPICE process documentation and auditing for automotive SW projects Job requirements: Bachelor/Master degree, major in motor control, electronics, electrical, automation Familiar with the position sensorless control algorithm of BLDC square wave and sine wave, FOC, space vector control, experience in related projects is preferred Proficient in at least one 16 or 32-bit microcontroller software design; proficient in Infenon or arm cortex software/hardware design is preferred Familiar with Matlab/Simulink modeling and simulation , and proficient in using at least one circuit simulation (Multisim, Pspice, Seber, etc.) software. Experience in applying matlab motor control software to automatically generate is preferred Familiar with automotive electronics, body network ( CAN/LIN protocol ), experience in related automotive projects is preferred Practical experience with ARM-based SW architecture development for BLDC motor drives Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do.

Job Responsibilities: Support for the design of embedded software (C language) for automotive brushless motor products, and participate in the design of the overall system scheme and the determination of software control algorithms Support for the construction of embedded software architecture, code writing and debugging, and system testing Support for product testing and monitoring, design of calibration software Support for the subsequent continuous improvement of product software Support for ASPICE process documentation and auditing for automotive SW projects Job requirements: Bachelor/Master degree, major in motor control, electronics, electrical, automation Familiar with the position sensorless control algorithm of BLDC square wave and sine wave, FOC, space vector control, experience in related projects is preferred Proficient in at least one 16 or 32-bit microcontroller software design; proficient in Infenon or arm cortex software/hardware design is preferred Familiar with Matlab/Simulink modeling and simulation, and proficient in using at least one circuit simulation (Multisim, Pspice, Seber, etc.) software. Experience in applying matlab motor control software to automatically generate is preferred Familiar with automotive electronics, body network (CAN/LIN protocol), experience in related automotive projects is preferred Practical experience with ARM-based SW architecture development for BLDC motor drives Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do. Show more Show less

Job Responsibilities: Responsible for the hardware circuit design of the brushless DC/BLDC/PMSM motor and the controller of the DC motor, the simulation design and analysis of the core hardware part Responsible for hardware requirement capture, analysis and documentation. Electronic component selection, control circuit schematic design, PCB layout design, and commissioning and testing of single-board components Work with software engineers to complete the commissioning and testing of the motor drive; Responsible for the compilation of project-related technical documents, BOM output and DFEMA; Responsible for Hardware qualification (CVT, DVT and PVT), EMC/EMI certification Lead the development of Hardware design, prototyping and validation quality processes Job requirements: (Please alter the Job requirements as per the JD Please) Bachelor/Master degree, major in motor control, electronics, electrical, automation Familiar with the position sensorless control algorithm of BLDC square wave and sine wave, FOC, space vector control, experience in related projects is preferred Proficient in at least one 16 or 32-bit microcontroller software design; proficient in Infenon or arm cortex software/hardware design is preferred Familiar with Matlab/Simulink modeling and simulation, and proficient in using at least one circuit simulation (Multisim, Pspice, Seber, etc.) software. Experience in applying matlab motor control software to automatically generate is preferred Familiar with automotive electronics, body network (CAN/LIN protocol), experience in related automotive projects is preferred Practical experience with ARM-based SW architecture development for BLDC motor drives Lead complex projects Meet customers to understand and design products according to customers' requirements Share and transfer knowledge to other engineers Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do. Show more Show less

GURUGRAM, 122001, IN Job details Work flexibility: Hybrid or Onsite Req ID: R540900 Employee type: Full Time Job category: Engineering Travel: 10% Relocation: No Related content Looking for a place that values your unique talents? Discover Stryker's award-winning culture. We are proud to offer you our total rewards package which includes bonuses, healthcare, insurance benefits, retirement programs, wellness programs, as well as service and performance awards – not to mention various social and recreational activities, all of which are location specific. Job description What you will do: Design and develop electrical components and sub-systems for medical devices. Conduct or design prototyping and bench testing. Conduct problem solving, identify potential solutions, and evaluate them against component and sub-system requirements. Conduct research and studies to support product design. Translate design inputs to engineering specifications and produce component and sub-system level designs. Identify, evaluate, and select electronic components that meet design requirements, required specifications and standards. Monitor lifecycle of components, including obsolescence, end-of-life (EOL) notifications, and replacement strategies, design documents update, executes change orders(ECR/ECO/MCO). Ensure all components comply with environmental regulations, such as RoHS, REACH, and other relevant standards. Provide technical support to resolve component-related issues during design, manufacturing. What you need: Required Qualifications: Bachelor / Master degree in Electronics or related discipline from reputed institute & 4+ years of work experience. Working knowledge of electrical design process, electrical components, and manufacturing methods. Ability to interpret, analyze, and test electrical designs.Proficiency with design and concept generation Altium CAD, CAE, or simulation tools. Expertise in Analog & digital circuits, PCB design using Altium, Designing high-power and high-frequency circuits with low EMI emissions,Troubleshooting circuits using measurement tools, Hands-on experience with soldering/desoldering electronic circuits. Experience in performing design simulations using PSpice, LT Spice, SI analysis tools. Experience with FPGA systems and embedded systems Preferred Qualifications: Understanding of controlled impedance trace routing techniques Creating multi-layer PCBs an advantage Stryker is a global leader in medical technologies and, together with its customers, is driven to make healthcare better. The company offers innovative products and services in MedSurg, Neurotechnology and Orthopaedics that help improve patient and healthcare outcomes. Alongside its customers around the world, Stryker impacts more than 150 million patients annually.

JD: Director Hardware Engineering Renewable Energy Location: Pune Key Responsibilities ● Lead and manage complete product development lifecycle from hardware engineering to system architecture. ● Work with all stakeholders to prototype, test and deploy new products into operation. ● Responsible for design, development, of AC-DC & DC-DC SMPS, Flyback, Forward, Full Bridge, Half Bridge, and Push-Pull Converter for low, medium, and high Voltage ● Develop and validate power electronics for high power battery chargers. ● Develop and verify digital and analog power electronics control hardware. ● Performing analysis such as Derating, FMECA (Failure mode, effects and criticality analysis), Reliability, Theta-JC, DFMEA (Design Failure Mode and Effect Analysis). ● Design of converter which includes Selection of Topology, MOSFET, Capacitors, PWM IC, Driver circuit. ● Create test procedures to verify hardware designs. ● Develop and test power electronic circuits, digital logic, microcomputer and analog circuits. ● Ensure products satisfy UL, CSA, IEC, IEEE, EU and EN requirements. ● Prepare product or system layout and detailed drawings and schematics. ● Design, develop control systems and electrical hardware for various R&D projects related to electrification. ● Prepare product reports and documentation (Requirement specification doc, Systems diagram, Flowchart, Firmware architecture, Code documentation, etc.) ● Capture design specification in well documented requirement specifications and evolve appropriate systems architecture. Pre-requisites ● B.E/M.E/B.Tech/M.Tech Degree in Electrical/Electronics Engineering with 6+ years of relevant work experience. ● Proven competency in analog and digital circuit design and validation using Altium, Or CAD or other relevant tools. ● Experience using simulation and modeling tools such as PSpice. ● Proficient in rapid prototyping techniques. ● Advanced user of oscilloscopes, signal generators, logic analyzers and other instruments. ● Well versed in design failure mode and effect analysis (DFMEA) process. ● Strong critical thinking / problem solving skills. ● Demonstrated ability to solve practical problems with a variety of variables in situations where ● only limited standardization may exist. ● Solid understanding of core concepts including Power Electronics, Analogue Circuits, Microcontrollers, Embedded C & C ++ etc, Firmware, Mini Grid, Micro Grid, IOT, Renewable Battery Charger, high Voltage, Solar base. ● Creativity and analytical skills Ability to communicate technical knowledge in a clear and understandable manner ● Team Player, Can work well with maintaining track of projects during pilot and full rollout to production. #DirectorHardwareEngineering #DirectorHardware #RenewableEnergy #HardwareEngineering #PowerElectronics #AnalogueCircuits #Microcontrollers #EmbeddedC #C++ #C #Firmware #MiniGrid #MicroGrid #IOT #Renewable #BatteryCharger #HighVoltage #SolarPower #BatteryChargers #PSpice PSpice #ElectricalElectronicsEngineering #BE #BTech #ME #MTech Show more Show less