57 Multimeter Jobs

???? Now Hiring: Electronics & PCB Design Engineer Full-Time ???? Location: Hyderabad (On-Site Only) | ???? Immediate Joiners Preferred At GenXReality , were building Indias most affordable high-performance VR headset from the ground up. As we move into the next phase of development, we&aposre seeking a skilled and experienced Electronics & PCB Design Engineer to join our core team and lead the hardware development in our in-house lab. ???? Role Responsibilities Design and simulate analog and digital circuits for embedded VR hardware Develop multi-layer PCB layouts using Eagle / KiCad / Altium Assemble and debug prototypes; perform soldering and hands-on lab testing Integrate sensors like IMUs, displays, drivers, and microcontrollers Ensure power efficiency, thermal management, and EMI/EMC compliance Collaborate with software, mechanical, and product teams Manage BOMs, vendor sourcing, and PCB iteration cycles Document version control and testing reports ? Candidate Requirements 2+ years of experience in PCB design and electronic circuit development Proficiency in PCB CAD tools and embedded electronics Strong understanding of signal integrity, grounding, and power systems Hands-on experience with lab tools (multimeter, oscilloscope, etc.) (Bonus) Experience in VR hardware, wearable tech, or compact product design Bachelors in ECE, Electrical, Embedded, or related field ???? Position Details Type: Full-Time (On-Site) Location: Chengicherla, Hyderabad Relocation Support: PG assistance & travel reimbursement for out-of-state hires Working Hours: 9:30 AM 5:00 PM, Monday to Saturday Show more Show less

Key Responsibilities: • Assemble and wire electronic subsystems as per drawings and wiring schedules. • Perform soldering (through-hole and SMD), crimping, and connectorization. • Assist in internal and external cable harnessing and routing. • Perform continuity, insulation, and functional tests using multimeters, LCR meters, and other instruments. • Follow ESD and IPC standards (such as IPC-A-610, IPC/WHMA-A-620). • Read and interpret engineering drawings, BOMs, and schematics. • Assist in environmental and functional testing of subsystems. • Maintain tools, calibration logs, and work area cleanliness. • Record work progress and report issues to supervisors or engineers. Required Skills: • Knowledge of electronic components and subsystem assembly. • Experience in soldering, wiring, and use of hand tools. • Ability to read and follow schematics and wiring diagrams. • Familiarity with test instruments (multimeter, oscilloscope, etc.). • Good communication and teamwork skills. • Exposure to MIL-grade connectors and aerospace/defense standards is a plus. Preferred Qualifications: • Certification in IPC-A-610 or IPC/WHMA-A-620 • Experience in aerospace, defense, or industrial electronics projects • Knowledge of HAL/DRDO/ISRO quality standards (if applicable)

Job Description: Should have worked on vehicle/component level DVP testing Should have basic Understanding on electric vehicle architecture Hands on experience on Oscilloscope, Multi-meter, 12V and 48V Power supply, voltage and current measurement, etc used in vehicle testing. Should have knowledge on CAN tools, Electric vehicle architecture for troubleshooting the issue in vehicle/component. Should have good knowledge on vehicle controllers, sensors and actuators Should be able to understand and execute the test cases on vehicle/Component. Should be able to assemble and route the harness and components as per specification. Good to have knowledge on Analysing the CAN data and Oscilloscope data.

You are an experienced Hardware Board PCB design engineer with over 3 years of experience, based in Vadodara, India. You possess a strong systems knowledge and have the ability to grasp high-level concepts quickly to achieve results effectively. Your skills include: - Working experience across various stages of hardware product development cycles - Expertise in High-speed board design - Proficiency in working with protocols such as PCIe, USB3.0, MIPI CSI/DSI, LVDS, HDMI, DDR3/4, SD/eMMC, NAND, SPI/I2C - Experience with peripherals like Image sensors, LCD displays, Flash memory, etc. - Strong knowledge of Timing, Pre and Post Signal Integrity Analysis, and simulation tools - Solid experience in board power supply design, Switching and linear regulators, and power supply filtering - Good understanding of board design guidelines, implementation, and EMI/EMC aspects - Skills in board bring-up, functional testing, DVT measurements, and validation - Proficiency in using EDA tools like Cadence Orcad, Allegro, Visio, Altium - Hands-on experience with board level testing and lab instruments such as Function generator, Oscilloscope, Multimeter - Awareness of board mechanical fitment - Excellent analytical and problem-solving skills - Strong team player with effective communication skills for cross-functional collaboration About A&W Engineering Works: A&W Engineering Works is focused on developing and deploying innovative solutions to real-world problems. The team at A&W Engineering Works is skilled in hardware, software, mechanical, and system development, and aims to address challenging problems by leveraging unique innovative development techniques for fast prototyping and delivering quick proof of concepts while preparing for production. To apply, please send your resume and cover letter to [email protected] with the job title in the subject line.,

Educational Qualifications: Bachelors degree in Electrical Engineering, Electronics Engineering, or a related technical field. Preferred : Master’s degree or MBA in Operations, Quality Management, or Industrial Engineering. Technical Skills and Certifications: Strong knowledge of : Electrical panel design (LT/HT panels, MCC, PCC, PLC panels) Electronic components and PCB manufacturing Wiring and testing of control panels Familiarity with Standards : IEC, IS, UL, ANSI, IEEE ISO 9001 (Quality Management) IPC standards for electronics (e.g., IPC-A-610, IPC-A-620) Certifications (preferred) : Six Sigma (Green Belt or higher) ISO 9001:2015 Internal Auditor Electrical safety certifications Experience Requirements: Minimum 9-12 years in Quality Control, with at least 2–3 years in a leadership/supervisory role. Hands-on experience with electrical panel inspection, electronics testing, fault diagnosis, and root cause analysis . Experience in internal audits, customer quality assurance , and regulatory compliance . Soft Skills: Strong leadership and team management Analytical thinking and problem-solving Attention to detail and documentation skills Good communication and reporting ability Ability to handle customer complaints and drive corrective actions Tools & Software Knowledge: ERP/SCADA systems (for production and testing traceability) Quality Management Systems (QMS) Electrical testing tools: Megger, Multimeter, HV tester, etc. Familiarity with AutoCAD (for electrical drawings) Microsoft Office (Excel, Word, PowerPoint) for reports and QC documentation

Job Title: Vending Machine Electrician @ Justvend Private Limited Department: Electrical / Technical Services Location: Bangalore Job Type: Full-Time // Field work - 2 wheeler should be there compulsorily Job Summary: The Vending Machine Electrician is responsible for the installation, repair, maintenance, and troubleshooting of electrical systems and components in vending machines. The role ensures machines are operational, safe, and comply with electrical codes and company standards. Key Responsibilities: Install, wire, and commission vending machines and related electrical components. Diagnose and repair electrical and minor mechanical faults in vending machines. Perform routine preventive maintenance to minimize downtime and improve reliability. Replace or repair components such as circuit boards, motors, switches, sensors, and wiring. Read and interpret electrical schematics, wiring diagrams, and technical manuals. Test machines for proper functionality after repairs or installations. Work with refrigeration components if machines include cooling units. Keep accurate records of work completed, parts used, and maintenance logs. Ensure compliance with safety regulations, electrical codes, and company procedures. Coordinate with suppliers and vendors for spare parts and technical support. Support other technicians and provide guidance when necessary. Qualifications: Graduate or Diploma in Electrical / Electronics Licensed electrician or relevant electrical certification will be addon. Proven experience in electrical repair and maintenance (vending machine experience is a plus). Strong understanding of electrical systems, wiring, and troubleshooting techniques. Ability to work independently and manage time efficiently. Familiarity with tools such as multimeters, soldering irons, and hand tools. Basic knowledge of refrigeration systems is a plus. Valid drivers license (if travel to vending locations is required). Physical Requirements: Ability to lift and move up to 50 pounds. * Two wheeler compulsorily required - Field work Ability to stand, kneel, bend, and crouch during service and installation work. Comfortable working in tight spaces or outdoors depending on machine placement. Work Environment: Involve travel to various customer or company vending machine locations. Indoor and outdoor work, depending on placement of machines. May require occasional evening or weekend work for emergency repairs or installations. Role & responsibilities Preferred candidate profile

Post: Testing AND repairing Technician/Engineer - Diploma/ITI Electronics Job Location: Faridabad Delhi/NCR Company: Embedded Design Service Pvt. Ltd. Faridabad WhatsApps/Mobile: 9899546490 Hardware Board bring-up first level testing Required Candidate profile Assist with Assembling & Testing of Electronics Circuits and Hardware Prototype. Support setup & operation of test equipment like Oscilloscops, Multimeter, Signal Generators & Power Supplies

You are a highly experienced hardware board design engineer with a minimum of 5 years of experience. In this role based in Vadodara, India, you will be responsible for designing hardware boards, demonstrating strong systems knowledge, and the ability to understand high-level concepts efficiently to produce effective results. Your key responsibilities will include working on various stages of hardware product development cycles, specializing in high-speed board design, and demonstrating expertise in protocols such as PCIe, USB3.0, MIPI CSI/DSI, LVDS, HDMI, DDR3/4, SD/eMMC, NAND, SPI/I2C. You should have hands-on experience with peripherals like Image sensors, LCD displays, and flash memory, among others. Additionally, you must possess a good understanding of timing, pre and post signal integrity analysis, and simulation tools. Furthermore, you will be expected to have a solid background in board power supply design, including switching and linear regulators, power supply filtering, and knowledge of board design guidelines and EMI/EMC aspects. Your role will also involve board bring-up, functional testing, DVT measurements, and validation, utilizing tools like Cadence Orcad, Allegro, Visio, and Altium. As a successful candidate, you should be proficient in board level testing and adept at using lab instruments such as function generators, oscilloscopes, and multimeters. An understanding of board mechanical fitment, excellent analytical skills, and strong problem-solving abilities are essential. Moreover, you must be a collaborative team player capable of effective communication with cross-functional teams. A&W Engineering Works, the organization you will be joining, is dedicated to developing and implementing innovative solutions to real-world challenges. The company's expertise spans hardware, software, mechanical, and system development, with a focus on fast prototyping and delivering quick proof of concept while preparing for production. To apply for this position, please send your resume and cover letter to [email protected], ensuring to include the job title in the subject line.,

We need experienced electronics ITI holder for assembling the PCB. Must be able to read the drawings, resistor and capacitor values and other electronic components. Good soldering technique required for through hole and SMD components.

As a member of the R&D-EV Sys D&D-EEArch&IntgrC/V team at TVS Motor Company's Hosur Plant in Tamil Nadu, India, you will be responsible for the design and development of electrical and electronics components such as ECU, Headlight, Switches, ISG controller, Sensors, etc. Your role will involve preparing architectures and integrating them at the vehicle level, as well as creating test cases for DVP for electrical parts. Additionally, you will be involved in making drawings and preparing SRS documentation. To excel in this position, you should be proficient in using tools like Oscilloscope, Multimeter, Power analyzer, Electronic load, etc. You will also be expected to conduct Proof of Concept (POC) activities for electrical components in accordance with the SRS. Your contributions will play a crucial role in advancing TVS Motor Company's commitment to innovation, customer satisfaction, and industry-leading products. Join us at TVS Motor Company, where we offer a diverse range of 2-wheelers and prioritize customer needs, quality, and timely delivery. With a strong focus on research and development, we are dedicated to providing innovative, user-friendly, and eco-friendly products that bring smiles to more than 44 million customers worldwide. Be a part of our team and help us continue our legacy of excellence in the automotive industry.,

Test Engineer for Pune Job description Roles and Responsibilities- The Test Engineer will be responsible for all Test equipment's, maintenance and management. Power supply calibration and maintenance. Making a testing jig validation plan and execute it, ICT Testing, test Fixture installation and verifications. He will also be responsible for Validation of test setups, Reading customer drawing and making a plan for testing PCBa. Candidate should have Experience of testing of different types of PCBa in Automotive/other electronics. Also Candidates with 5-7years of experience in MANUFACTURING INDUSTRY will be given preference. Walk in candidates will be given priority on a first come first serve basis. Outstation candidates may apply by email to opportunities@frontlineelectronics.com or WhatsApp on 8888841701

Role & responsibilities • Electronics circuit analysis • Repairing & testing of PCBs and electronic modules • Knowledge of digital and analog electronics • Soldering and desoldering (SMT and through-hole components) • Hands-on experience with multimeter, oscilloscope, LCR meter, function generator, etc. • Troubleshooting of electronic hardware issues • Calibration of test instruments and tools • Reading and interpreting electronic schematics and datasheets • ESD safety handling and procedures • Familiarity with electronic testing software and data logging tools • Basic knowledge of power electronics (DC-DC converters, SMPS, etc.) • Root cause analysis and failure diagnostics • Knowledge of test jigs and fixture operation Preferred candidate profile

As a Field Application Engineer at Vecmocon, you will play a crucial role in the testing and integration of electric vehicle sub-systems. Your primary responsibility will involve leveraging your strong understanding of electrical engineering fundamentals to conduct integration and testing of Battery Management Systems (BMS), EV chargers, and Vehicle Intelligence Modules (VIM) for electric vehicles. Working in close collaboration with the R&D team, you will contribute to the development of cutting-edge solutions that prioritize safety, reliability, and performance. Your key responsibilities will include comprehending project requirements and electrical schematics to facilitate the integration and testing of BMS, chargers, and IOTs at both bench and vehicle levels. You will conduct testing, collect and analyze CAN data, ensure protocol adherence, generate test reports, and offer valuable feedback to the R&D team. Root cause analysis, test plan development, data analysis for performance optimization, technical support at customer sites, and training customer technicians on Vecmocon software and tools will also be part of your role. Moreover, you will be expected to travel to customer locations for integration and testing, as this is a field job that requires a willingness to travel. To excel in this position, you should possess a strong foundation in Electrical and Electronics concepts, proficiency in documentation tools like Word and Excel, hands-on experience in CAN communication, familiarity with testing tools such as a multimeter and DSO, and proficiency in English communication. Excellent problem-solving and analytical skills, basic soldering experience, and the ability to interpret schematics are also essential for success in this role. While not mandatory, it would be advantageous to have knowledge of battery management systems, including cell balancing and fault protection, as well as an understanding of different battery types and components. The ideal candidate for this role would hold a Bachelor's or Diploma in Electrical and Electronics, with a preference for individuals with experience in industries related to automotive electronics, IOT, inverters, chargers, or solar technologies. At Vecmocon, we are dedicated to developing reliable, robust, and cost-efficient systems that drive the widespread adoption of electric vehicles globally. Join our passionate team and be part of the innovation shaping the future of intelligent and sustainable mobility solutions.,

The role based in Jalkot, Maharashtra, India requires you to conduct site visits, carry out various electrical tasks, coordinate with both senior and junior technicians, and supervise and mentor junior electrical engineers. Your responsibilities will include coordinating, scheduling, executing, and reporting on activities, performing electrical works such as installation, preventive and corrective maintenance, managing technicians, and guiding junior electrical engineers. To qualify for this position, you should hold a B.E/M.E degree in ECE, EEE, or a related field and possess a minimum of 3 years of experience in electrical works, covering both AC and DC applications. The ideal candidate should be proficient in using laptops, smartphones, and mobile applications, have knowledge in handling AC and DC equipment, testing instruments, multimeters, and telecommunications systems. Effective technical skills, critical thinking, problem-solving abilities, good communication skills (both verbal and written), project management expertise, and team management and leadership skills are also essential for this role. Key skills required for this position include coordination with candidates, servicing inverters, troubleshooting DC sub-systems, and the use of laptops, smartphones, and EIRA APP. If you meet these qualifications and possess 4-6 years of relevant experience, we look forward to receiving your application by May 7, 2024.,

As a Senior Lead Engineer/ Technical Lead specializing in wiring harness, your responsibilities will include functional and fitment testing of wiring harness and sub-aggregates on bench level as well as providing support for Proto build activities. You will be involved in wiring harness rework based on rework instructions, diagnosing faults, and conducting root cause analysis for all failures observed on proto vehicles. You will also be responsible for testing and validating wiring harnesses on Lab Cars, supporting new proto sample development, and conducting routing and packaging audits of wiring harnesses in vehicles during New Product development. Additionally, you will manage Vehicle Prototypes and prepare them, as well as assemble wiring harnesses and electrical components on vehicles. Your role will involve conducting complete electrical checklists on vehicles, checking wiring harness schematics, and performing on-vehicle diagnostics, troubleshooting, and root cause analysis on development vehicles. It is essential to have a good understanding of Vehicle Electrical Systems such as Starting system, Charging system, and Lighting system. Moreover, you should possess good knowledge of using testing instruments like Insulation Tester, Multimeter, Current Meter, and Environmental testing equipment. Your expertise in these areas will be crucial in ensuring the efficiency and reliability of the wiring harness systems in vehicles.,

Soldering and rework of electronic assemblies (including all types of SMD/Non-SMD components) based on BOMs and Process Sheets followed by thorough verification and Testing Testing of the prototype design before delivery to engineers

Dear All, We have urgent opening for Executive customer support - Chakan (Pune) Location Please find below Job description. Role & responsibilities 1)To look after Installation & services like Maintenance & Troubleshooting of GPS Units. 2)Need to visit Customer Site regularly & resolve their Problem related to GPS. 3)Basic Knowledge of electronics & electrical with multimeter knowledge is must. 4)Should be Energetic & ready to do field Job. 5)Should be customer friendly. 6)Two-wheeler is a must 7) Fresher with ITI or Diploma degree preferably in Electronics. Company Website- www.aryaomnitalk.com Preferred candidate profile Experience - 0 to 3 years Education - ITI/ Diploma (Electrical/Electronics) Must have Bike Perks and Benefits Mediclaim Travelling Allowance Interested Candidates can Share CV on yogini.pattekar@aryaomnitalk.com or call on 7757091336

We are hiring for US based MNC and job location is Bangalore Interested candidates can directly share CV at pratibha@myndsol.com mentioning the job title in the subject line. Looking for immediate joiners Job Title - Technical Support Application Engineer The role is part of the KeysightCare Customer Support Organization, delivering post-sales customer support directly to key customers and strategic partners. The KeysightCare Technical Support Application Engineer is a key player in the customer value-chain and you are critical in supporting our customers technical problems. We are looking for an experienced RF&W Component Test application/product specialist engineer who can demonstrate a broad knowledge of instrumentation, applications and technologies. You will develop to get the go to knowledge expert within KeysightCare and will engage with customer and partners across EMEAI to deliver post-sales customer support. You will be a key contributor to the KeysightCare EMEAI regional strategy and will work across KeysightCare to lead projects requiring coordination with other functions, customers, third parties. The successful candidate must demonstrate a real passion for customer success and enjoy taking on complex technical challenges working in a customer facing deep technical environment. Responsibilities include: - Engage with customers, sales and/or service representatives across EMEAI to deliver post-sales customer support, solving technical questions of varied scope and complexity. - Manage day to day operations and workload expectations autonomously. - Share technical expertise across the EMEAI team and write deep technical articles for the customer knowledgebase - Close cooperation with the Keysight product and software and solution centres. The technical support application engineer is the technical interface between the customers and the Keysight Worldwide support team. - Take proactive actions while interacting with customers in terms of solving current questions or addressing potential future needs. - Deliver Getting Started and Start Up Assistance to customers remote and onsite. - Develop into the Component Test knowledge expert within KeysightCare for products and solutions Job Qualifications: - Bachelor and/or Masters degree in Electronic and Communication Engineering. - Typically, 5-8 years relevant experience working in Vector Network Analysis, Impedance Analysis and DC Device Parameter Analysis. - Is familiar with calibration techniques, like SOLT, TRL, De-embedding in coax, waveguide and on-wafer. - Brings experience of testing passive and active components from filters to high power amplifier or mixers with VNAs. - Solid understanding of modern VNA measurements beyond S-Parameters like, gain compression, IMD, Noise Figure. - Requires in-depth technical knowledge and experience in job and ability to work independently. Solid understanding of RF/W fundamentals with practical experience using RF/W test equipment. - Solid understanding of the generation, demodulation and analysis of digital communication signals. - Advanced instrument programming skills with SCPI and instrument drivers with C++, C#, VEE, LabView, Python, MATLAB or VB, is an advantage. - Strong organisational skills, ability to multi-task, prioritise and work well under pressure. - A strong level of English written and Oral is essential for this role. - Extra languages are an advantage. - Understands the local market, customer needs and dynamics, strong communicator who can positively interact with customers. Interested candidates can directly share CV at pratibha@myndsol.com mentioning the job title in the subject line.

You will be responsible for performing electronic assembly works for various products at Genrobotics. This includes interpreting wiring diagrams, schematic wiring drawings, and utilizing your knowledge of basic electronic devices. Experience in soldering, crimping, and using equipment such as a multimeter is required. Familiarity with MCB, RCCB, and experience in PCB assembly (both SMD & through hole) will be beneficial. A positive attitude, willingness to work as part of a team, and the ability to take initiative and lead when necessary are essential qualities for this role. You should be prepared for frequent travels and be open to working remotely for extended periods. Problem-solving skills and effective communication are a must-have. The basic qualification required for this position is a Diploma in Electronics or Instrumentation, along with 2-4 years of relevant experience. The job location is at KSIDC Plant Palakkad with service activities throughout Kerala, including remote work. Candidates from Palakkad are preferred for this role. Your skills in through hole soldering, communication, RCCB, PCB assembly, electronic assembly, working overtime and in shifts, interpreting wiring diagrams, crimping, and troubleshooting electronic issues will be crucial for success in this position.,

We are urgently hiring Helpers with ITI in Electrical or Mechanical for our growing operations. The candidate will be responsible for assisting technicians, maintaining machinery/equipment, and performing basic electrical and mechanical tasks. Key Responsibilities: Assist technicians in electrical or mechanical maintenance work Help in installation and troubleshooting of machines/equipment Carry tools and materials for maintenance work Follow safety and standard operating procedures Maintain cleanliness and organization in the work area Candidate Profile: ITI qualified in Electrical / Mechanical trade 12 years of experience (Freshers welcome) Basic understanding of electrical/mechanical tools Willingness to learn and work in a team Physically fit and hardworking Benefits: Fixed monthly salary Overtime allowance Accommodation Career growth opportunities

Responsible for researching, designing, and developing innovative PCB testing solutions for Testing fixtures. Involves concept development, schematic design, PCB layout, prototyping, and validation. Collaborates with cross-functional teams to optimi

Testing and Troubleshooting of Electronic PCBs/Systems Depth knowledge of Electronics hardware Skilled to use Test Measurement equipment like Oscilloscope, Multimeter, LCR Meter Good Documentation Skills

Role & responsibilities Hands-on experience in electronics testing. Practical knowledge in testing SMPS-based products or Key Requirements Solid understanding of Basic Electronics Fundamentals and Circuit Theory. Good knowledge of Electronic Components and how to test . Skilled in using Electronic Measuring Equipment (e.g. Multimeters, oscilloscopes, etc.). Preferred candidate profile Work Experience in PCA testing , Strong troubleshooting skills for electronic circuits and PCBs. Debug and analyse PCBs (cards) with process-related issues to identify and resolve faults. Conduct on-site testing and support at customer production centers, ensuring proper product functionality in real-time environments. Operational skill of measuring equipment -Oscilloscope, Multi meter, functional generator, Rheostat

Hardware Design Engineer Job Title : Hardware Design Engineer Location : Chennai, Hyderabad, Bangalore Experience : 2-5 Overview: Designs and develops complete hardware systems, integrating various components and ensuring functionality, reliability, and manufacturability. Key Responsibilities: Develop system-level hardware architecture. Select and integrate components. Perform testing and debugging. Collaborate with software and mechanical teams. Tools & Technologies: Altium, OrCAD, SolidWorks (for enclosures) Oscilloscopes, multimeters EMI/EMC compliance tools Career Path: Senior Hardware Engineer Hardware Architect Product Development Manager

1) Carry out the site calibration activities of mechanical instruments such as dimension measuring, torque wrench, pressure gauges, durometer, weighing balance etc.. 2) Control of calibration and certificate related activities 3) Monitoring, maintaining & recording environmental conditions 4) Control on master equipment 5) Control of calibration data 6) Capable for NABL audits.