66 Mechanical Assembly Jobs

As a skilled individual in UAV technology, you will be responsible for handling various tasks related to UAV assembly, maintenance, deployment, and troubleshooting. Your primary duties will include wiring, soldering, and making electrical connections as part of drone assembly and maintenance. Additionally, you will assist in the mechanical assembly of drones, ensuring the correct integration of all mechanical and electrical components. You will be required to travel to operational sites and provide field support to the team by assisting with UAV deployment, troubleshooting, and repairs. Conducting pre-flight checks, calibrating UAVs, and ensuring optimal performance before deployment will also be part of your responsibilities. In the event of any electrical or mechanical issues, your expertise will be crucial in diagnosing and resolving them efficiently. Collaboration with engineers and operators will be essential to enhance UAV performance and reliability. Your technical skills should include hands-on experience in soldering and electrical connections, proficiency in mechanical assembly, and a basic understanding of UAV components like motors, ESCs, flight controllers, and power distribution systems. You should also be capable of reading circuit diagrams and troubleshooting electrical problems effectively. Soft skills such as strong attention to detail, problem-solving abilities, teamwork, and the ability to work in fast-paced environments are crucial for success in this role. A willingness to travel for field operations when necessary is also required. Preferred qualifications include experience with UAV flight controllers, knowledge of LiPo battery handling, familiarity with RF communication systems, and basic programming knowledge for UAV customization. Joining our team will provide you with the opportunity to work on cutting-edge UAV technology, gain hands-on experience in real-world drone operations, and be part of an innovative and collaborative environment. This is a full-time, permanent position with benefits including health insurance and provident fund. The work schedule may involve day and morning shifts, with a yearly bonus. The work location is in person.,

As an experienced professional with over 8 years of experience, you will be responsible for assembly repair and testing of electronic devices, L4 soldering, harness assembly, mechanical and electrical assembly, as well as testing, repairing, and troubleshooting. You will be based in Noida and expected to work from the office. To be successful in this role, you should have an educational background in ITI or Diploma in a relevant field, along with basic computer knowledge. Your expertise in assembly repair and testing of electronic devices, soldering, harness assembly, mechanical and electrical assembly, as well as your ability to troubleshoot and repair will be crucial for this position.,

Job Description: Kitron is currently seeking a Product Quoting Engineer to join our team in Chennai, India. As a Product Quoting Engineer, your primary responsibilities will include calculating labor costs for assigned projects, analyzing technical data provided by customers, leading the labor calculation aspect of projects, providing technical support to Key Account Managers and Quoting specialists, conducting investigations and assessing process flows at Kitron manufacturing sites, participating in cross-functional projects, sharing knowledge to contribute to process improvement, ensuring work quality aligns with established procedures, and collaborating with site engineers to gather necessary data. Requirements: To be successful in this role, you should have a Bachelor's or Master's degree in manufacturing or electronics engineering. Alternatively, relevant work experience can substitute for formal education. You must have a minimum of 3 years of work experience and a solid background in electronics manufacturing with a comprehensive understanding of technical processes. Proficiency in reading PCBA and electronic drawings is essential, along with strong English language skills. Attention to detail, a commitment to excellence, the ability to meet challenging deadlines, adaptability, and resilience are key qualities for this position. You should possess strong interpersonal skills, a collaborative mindset, initiative in problem-solving, and goal achievement. Proficient knowledge of mechanical assembly is considered an advantage. We offer: Joining Kitron provides you with the opportunity to be part of a global team working on diverse projects. We offer opportunities for personal and professional development, along with training and competence development courses to support your growth.,

Manage daily assembly operations and team tasks Ensure quality, deadlines, and material availability Interpret technical drawings and instructions Train staff and enforce safety and 5S standards Maintain records and support process improvements Required Candidate profile Willing to work in shifts Skilled in engineering drawings, GD&T, MS Office (SAP a plus) Must be ready to relocate to Pirangut, and subsequently to Khandala after 3 months

We are seeking a dynamic and detail-oriented professional to join our Hot Rolling Mechanical Maintenance team in the role of Manager as Preventive Maintenance In charge. Job Purpose: Strong knowledge of preventive maintenance planning, execution, and documentation Experience in roll assembly, bearing mounting, and mechanical fitment practices. Familiarity with hydraulic, pneumatic, and lubrication systems used in rolling mills Ability to analyze equipment failures and implement corrective/preventive actions Proficient in reading mechanical drawings and understanding tolerances Good coordination skills to work with production, planning, and procurement teams Working knowledge of SAP system will be an added advantage Strong safety orientation and adherence to industrial safety practices Key Responsibilities: Preventive Maintenance Planning Execution: Responsible for planning, scheduling, and executing preventive maintenance of critical equipment in the Hot Rolling Mill to ensure maximum uptime and reliability. Assembly Supervision: Oversee roll and bearing assemblies, fitments, and related mechanical sub-assemblies with precision and adherence to standards. Breakdown Analysis Troubleshooting: Identify root causes of equipment failures and implement corrective and preventive actions to avoid recurrence. Documentation Reporting: Maintain proper maintenance records, history logs, and job reports; ensure adherence to compliance and audit requirements. Coordination Safety Compliance: Coordinate with operations, planning, and procurement teams; ensure strict adherence to safety protocols during all maintenance activities.--- Qualifications Experience: B.E./B.Tech in Mechanical Engineering 520 years of relevant experience in Hot Rolling Mill maintenance and mechanical assembly Experience with hydraulic and lubrication systems Key Skills Competencies: Strong understanding of mechanical systems, fits, tolerances, and assemblies Skilled in troubleshooting mechanical equipment in high-speed rolling environments Knowledge of preventive maintenance tools, practices, and CMMS (e.g., SAP PM) Good communication, coordination, and team management abilities High attention to detail and strong safety mindset

Strong knowledge of preventive maintenance planning, execution, and documentation Experience in roll assembly, bearing mounting, and mechanical fitment practices. Familiarity with hydraulic, pneumatic, and lubrication systems used in rolling mills Ability to analyze equipment failures and implement corrective/preventive actions Proficient in reading mechanical drawings and understanding tolerances Good coordination skills to work with production, planning, and procurement teams Working knowledge of SAP system will be an added advantage Strong safety orientation and adherence to industrial safety practices Key Responsibilities: Preventive Maintenance Planning Execution: Responsible for planning, scheduling, and executing preventive maintenance of critical equipment in the Hot Rolling Mill to ensure maximum uptime and reliability. Assembly Supervision: Oversee roll and bearing assemblies, fitments, and related mechanical sub-assemblies with precision and adherence to standards. Breakdown Analysis Troubleshooting: Identify root causes of equipment failures and implement corrective and preventive actions to avoid recurrence. Documentation Reporting: Maintain proper maintenance records, history logs, and job reports; ensure adherence to compliance and audit requirements. Coordination Safety Compliance: Coordinate with operations, planning, and procurement teams; ensure strict adherence to safety protocols during all maintenance activities.--- Qualifications Experience: B.E./B.Tech in Mechanical Engineering 5 to 20 years of relevant experience in Hot Rolling Mill maintenance and mechanical assembly Experience with hydraulic and lubrication systems Key Skills Competencies: Strong understanding of mechanical systems, fits, tolerances, and assemblies Skilled in troubleshooting mechanical equipment in high-speed rolling environments Knowledge of preventive maintenance tools, practices, and CMMS (e.g., SAP PM) Good communication, coordination, and team management abilities High attention to detail and strong safety mindset

Assemble mechanical and electromechanical components according to technical drawings and work instructions. Machine testing. Sheet metal work Inspection of parts Perform drilling, tapping, and basic machining operations as required for part fitting and assembly. Use precision measuring instruments (e.g., calipers, micrometers, dial indicators) to inspect and verify part accuracy. Assist in troubleshooting and rectifying assembly issues. Work closely with engineering and quality teams to meet production and quality goals. Ensure proper handling, storage, and maintenance of tools and measuring instruments. Outdoor site visits for machine installation and servicing.

You will be responsible for performing routine maintenance on electric vehicles to ensure efficient and safe operation. This includes conducting regular inspections and maintenance tasks to keep the vehicles in optimal condition. Your role will also involve diagnosing and repairing problems with electric vehicle components such as batteries, electric motors, charging systems, and control systems. You will need to identify issues and conduct necessary repairs or replacements to ensure the vehicles are functioning properly. As part of your responsibilities, you will be managing battery systems by monitoring battery health, diagnosing battery issues, and performing maintenance or replacement of batteries when required. You will also be involved in installing, maintaining, and repairing electric vehicle charging systems, both at home and public charging stations. Additionally, you will work with the electronic and software systems integrated into electric vehicles. This includes understanding diagnostic tools, software updates, and ensuring that all electronic components are functioning correctly. Safety compliance is a critical aspect of this role, and you will be expected to ensure that all work performed meets safety standards and regulations specific to electric vehicles. You will also communicate with vehicle owners to understand issues, explain necessary repairs, and provide guidance on vehicle maintenance and operation. This is a full-time position with a flexible schedule. The job is based in Dharuhera, Haryana, and requires the ability to commute or relocate to the area. The ideal candidate should have at least 1 year of experience in electrical engineering, quality management, mechanical assembly, R&D, and PCB work. Join us in this exciting opportunity to work with electric vehicles and contribute to the future of sustainable transportation.,

You are required to have a minimum of 2 to 5 years of experience as an Assembly Engineer in the refrigeration industry. Your responsibilities will include, but are not limited to, bending, cutting, and brazing copper pipelines, handling refrigerant gases, monitoring pressure gauges, and ensuring gas balancing. You should also be proficient in interpreting engineering documentation, such as material lists and refrigeration assembly drawings. A basic understanding of the electrical components of refrigeration systems and knowledge of various refrigeration items, including valves, copper pipes, capillary tubes, compressors, driers, and oil separators, is essential. Experience in manufacturing hot and cold chambers, as well as the ability to coordinate mechanical assembly activities related to chamber assembly, such as cutting, drilling, and tapping, is required. You will also be expected to assist with the field/site installation of equipment and service activities as needed. A strong grasp of the production assembly process, the ability to detect and resolve technical issues, problem-solving skills, and a quality-focused approach are crucial for this role. Maintaining 5S standards, effective communication skills, a willingness to learn, and the ability to work full-time are essential requirements. Preferred qualifications include 3 years of experience as an Assembly Engineer, 2 years of experience in refrigeration, and a total of 4 years of relevant work experience. This is a full-time position located in Poonamallee.,

Roles and Responsibilities Assemble, fit, and fabricate mechanical components according to specifications. Perform tapping, drilling, and other metalworking operations as required. Collaborate with team members to complete projects efficiently. Maintain a clean and organized work environment. Conduct quality control checks on assembled parts to ensure accuracy and precision.

You are seeking an Electrician/technician who has completed ITI in Electrical. Your responsibilities will include being proficient in basic electric wiring and soldering of surface mount and thru-hole components. You will be required to independently install devices at the customer's location and should be willing to travel when necessary. A basic knowledge of components such as resistors, capacitors, and diodes is essential. You must also know how to use an oscilloscope and test electronic circuits. While an understanding of microcontrollers is desirable, it is not mandatory. Additionally, having some hands-on experience in mechanical assembly or mechanical engineering would be advantageous but not necessary. Effective communication, explanation, and demonstration skills will be highly valued in this role. The required educational qualification is a High School diploma or equivalent, and a minimum of 1 year of relevant experience is necessary.,

As an ITI Fitter at Stud Automation in Ludhiana, you will play a crucial role in assembling, installing, and servicing customized industrial robots. Your responsibilities will involve reading and interpreting technical drawings, fitting adjustable parts with precision, troubleshooting mechanical issues, and performing routine maintenance checks. Collaboration with the engineering team is essential to ensure the adherence to precision and performance standards. To excel in this role, you should possess technical skills in mechanical assembly, fitting, and maintenance. The ability to interpret technical drawings and blueprints accurately is a must. Prior experience with industrial automation and robotic systems will be advantageous. Strong troubleshooting and problem-solving abilities are key requirements, along with effective team collaboration and communication skills. Candidates with an ITI certification in the Fitter trade and relevant work experience in industrial or manufacturing settings are encouraged to apply. Stud Automation offers a dynamic work environment where you can contribute to the development of innovative automation solutions tailored to meet the unique needs of our clients.,

Educational Qualification : B.E./B.Tech/M.Sc/M.E./M.Tech in Mechanical Engineering, Aerospace Engineering, or a related field. Work Experience : Minimum 3-4 years of experience in Mechanical Assembly integration of components/products within the aerospace, satellite manufacturing, automotive or defence industries. Role Description: A Mechanical AIT Engineer in the PRD team of the Space Department of Pixxel. Responsibilities Duties: Oversee and execute satellite assembly, integration, and testing processes with a team of technicians and engineers, managing the production of a set of Pixxel satellites. Draft detailed, step-by-step mechanical AIT procedures and assembly checklists for technician implementation, based on Engineering Team designs and input. Verify and validate each step of the AIT procedures post-implementation by technicians on the shop floor, encompassing Structural Assembly, Thermal control implementation, and subsequent environmental testing. Lead the development of all Mechanical Ground Support Equipment (MGSE), including comprehensive 3D CAD design, basic stress analysis, vendor identification and management, and the inspection and qualification of all MGSE. Supervise all satellite environmental testing processes, such as Thermal tests, vibration tests, and motion simulations. Collaborate with the production management team to plan the daily satellite production schedule. Address and resolve any issues that emerge during satellite AIT. Document the progress of the satellite AIT process and record observations during the inspection and validation of procedures after implementation, utilizing enterprise software or manual record entry. Ensure the proper handling, storage, and tracking of all satellite components on the shop floor following handover from the Inventory Manager. Desirable Skills Certifications: Excellent English communication skills are essential (Hindi and Kannada proficiency is a plus) for effective daily interaction with the production team and technicians. Must be proficient in 3D CAD software such as SolidWorks and NX. Hands-on experience in operating power tools (like cutting tools) to conduct basic reworks and participate in developing prototype assemblies. Requires a basic understanding of thermal control implementation on satellites (including MLI, OSR, heaters, sensors, etc.). Must have experience reading and interpreting datasheets, technical reports, technical drawings, schematics, and assembly/test plans. Good experience with resource and production planning enterprise tools (e.g., SAP, ERP) is expected. High proficiency in documentation and planning tools (e.g., Google Workspace - Docs, Sheets; MS Projects; Jira) is required. Understanding of electrical and mechanical integration concepts and processes, along with a strong command of relevant tools, is necessary. A good understanding of mechanical engineering and the operation of environmental test equipment (e.g., thermal vacuum chambers, shaker tables, 3-axis motion simulators) is expected. A strong understanding of test campaigns and the ability to quickly and accurately document test reports and results is required, along with a good understanding of satellite environmental testing. Strong experience and proficiency in understanding and maintaining tools and test equipment are necessary. Knowledge of ESD phenomena and best practices for prevention, as well as surface cleaning and preparation processes, is a plus. Certification from organizations like ISRO in areas related to Mechanical AIT of spacecraft and satellites is a bonus. Candidate Acumen: A strong desire to work in an unstructured, high-growth, fast-paced start-up environment. Ability to deal with challenges and work out innovative solutions to tackle them. Building a team and guiding them towards success. Benefits: Health insurance coverage Unlimited leaves flexible working hours Role-based remote work and work-from-home benefit

Responsibilities: Right from quotatiaon making to design, follow up, dispatches, site supervision, etc. Annual bonus

As an ITI Mechanical Technician at Dyna Energy Solutions LLP in Bhiwandi, Mumbai, you will be an integral part of our electric vehicle (EV) manufacturing team. Dyna is a leading manufacturer of electric two-wheelers, dedicated to transforming urban transportation with sustainable and innovative solutions. Your primary responsibilities will include mechanical assembly, installation, and maintenance of EV components such as chassis, suspension, and drivetrain systems following engineering drawings and standard operating procedures. Ideal candidates for this position will have a background in mechanical fitting or vehicle mechanics, practical experience with tools and measuring instruments, and a strong focus on quality and safety. Working collaboratively with cross-functional teams in production, service, and R&D, you will contribute to the efficient manufacturing process of electric two-wheelers. This role is suitable for both freshers and technicians with up to 3 years of experience who are enthusiastic about advancing within a dynamic EV company. Key Responsibilities: - Carry out mechanical assembly of EV components including chassis, motor mounts, wheel assemblies, battery enclosures, and body panels. - Assist in vehicle assembly, testing, and Pre-Delivery Inspections (PDI). - Support the installation and alignment of essential powertrain components like motors, axles, and suspension. - Perform routine and preventive maintenance on EVs, with a focus on mechanical systems such as brakes and steering. - Participate in prototype builds and provide support during pilot production. - Undertake basic fabrication tasks like drilling, grinding, and welding as necessary. - Utilize tools like torque wrenches, spanners, drills, grinders, and mechanical jigs/fixtures. - Interpret and adhere to assembly drawings, SOPs, and work instructions accurately. - Conduct visual inspections and quality checks during the assembly process. - Work closely with the electrical and electronics team for integrated vehicle assembly. - Maintain a clean and safe work environment, ensuring compliance with all PPE and safety standards. Skills Required: - Minimum of 3 years of experience in EV or automotive mechanical assembly. - Basic knowledge of high-voltage safety procedures. - Familiarity with EV drivetrain, hub motors, or battery systems is advantageous. - Proficiency in using mechanical tools, industrial machinery, and measuring instruments like calipers, micrometers, and gauges. - Ability to interpret mechanical drawings effectively. - Strong problem-solving and diagnostic capabilities. - Excellent teamwork, discipline, and communication skills. - Willingness to learn rapidly and follow instructions meticulously. This is a full-time, permanent position with benefits such as cell phone and internet reimbursement, as well as Provident Fund. The work schedule is during the day shift or morning shift. If you meet the required qualifications and are eager to contribute to the future of EV manufacturing, we encourage you to apply.,

1. Fitting & Assembly 2. Wiring, Routing & Cabling Support 3. BOM Execution, Parts Sourcing & Inspection before assembly 4. Fixture & Jig setups, Prototype Development 5. Maintenance & Calibration 6. Workshop & Workplace Management

Key Responsibilities: Develop and conduct proving tests for assembly lines and products. Validate assembly processes against design and quality standards. Identify, analyze, and resolve assembly issues and bottlenecks. Collaborate with design, quality, and production teams to optimize assembly processes. Document test results and recommend corrective actions. Assist in preparing assembly work instructions and SOPs. Support continuous improvement and Lean manufacturing initiatives. Ensure compliance with safety and regulatory standards during testing. Qualifications & Skills: Bachelors degree in Mechanical, Industrial, or Manufacturing Engineering. 2+ years of experience in assembly process validation/testing preferably in automotive, aerospace, or electronics sectors. Strong knowledge of assembly tools, fixtures, and mechanical joining techniques. Hands-on experience with testing equipment and interpreting technical data. Familiarity with Lean Six Sigma and quality assurance methodologies is a plus. Excellent analytical, problem-solving, and communication skills. Ability to work in a team-oriented, fast-paced environment.

Qualifications and Experience: [Immediate Only] - ITI or Diploma with a minimum of 3 years of experience in: 1. Soldering (Level 4) 2. Wire Harness 3. Wiring 4. Mechanical Parts Assembly - Good communication skills

You will be joining our machine manufacturing team as a Technician Trainee with the opportunity to receive on-the-job training in various aspects of industrial machine assembly, testing, maintenance, and quality control. This entry-level position is specifically designed to help you develop technical skills and gain practical knowledge within a real-world manufacturing environment. Your main responsibilities will include assisting in the assembly and installation of mechanical and electromechanical machinery according to technical drawings and standard operating procedures. Additionally, you will be supporting maintenance activities, such as preventive maintenance and basic troubleshooting of machines. You will have the opportunity to learn and safely operate hand tools, power tools, and precision measuring instruments. Furthermore, you will participate in machine testing and inspection under the guidance of senior technicians and record work activities, defects, and measurements in daily logs and checklists. Maintaining cleanliness and safety in the work area, as well as following all safety procedures, will be crucial aspects of your role. You will be expected to follow instructions from supervisors and senior technicians while working collaboratively in a team environment. Continuous improvement of your technical knowledge through on-site training and mentorship will also be encouraged. This is a full-time position suited for fresher candidates. The benefits include Provident Fund, and the work location is in person during day shifts.,

PCB Soldering, PCB Assembly, Circuit understanding, Product Assembly, Testing and Integration of sub-systems. Diagnose and repair electronic devices, PCB components and systems. To understand and interpret technical schematics, circuit diagrams, and manuals for product build and troubleshooting. To perform routine inspections and preventive maintenance on electronic equipment and test equipment.

As an ITI Fitter at Stud Automation, your primary responsibility will be to assemble, install, and service customized industrial robots. This is a full-time on-site role located in Ludhiana. You will play a crucial role in enhancing the efficiency and productivity of manufacturing processes through your technical expertise. Your day-to-day tasks will involve reading and interpreting technical drawings, fitting adjustable parts to prescribed tolerances, troubleshooting mechanical issues, and conducting routine maintenance checks. It is essential to collaborate closely with the engineering team to ensure that precision and performance standards are consistently met. To excel in this role, you should possess technical skills in mechanical assembly, fitting, and maintenance. Additionally, the ability to read and interpret technical drawings and blueprints is crucial. Experience with industrial automation and robotic systems will be an added advantage. Strong troubleshooting and problem-solving skills are required to address any mechanical issues effectively. Effective communication and collaboration skills are essential as you will be working closely with the engineering team. An ITI certification in the Fitter trade and relevant work experience in industrial or manufacturing settings are necessary qualifications for this role. If you are passionate about industrial automation and have a keen eye for detail, this role at Stud Automation offers an exciting opportunity to contribute to the development and deployment of cutting-edge robotic systems. Join us in delivering innovative automation solutions that meet the unique needs of our clients.,

We are currently seeking an Assembly Engineer for our HVAC, Air conditioning, Chamber, and Cold room industries in Chennai, Poonmallee. As an Assembly Engineer, you will be responsible for refrigeration assembly tasks such as copper pipe line bending, cutting and brazing, handling refrigerant gases, monitoring pressure gauges, gas balancing, and more. To qualify for this position, you should have a Diploma in RAC / ITI with at least 3-8 years of relevant experience in the field. You should possess in-depth knowledge of refrigeration assembly processes and be capable of understanding engineering documentation like material lists and assembly drawings. In addition, you should have a basic understanding of electrical components related to refrigeration systems and must be able to conduct incoming inspections of various refrigeration items including valves, copper pipes, compressors, and more. Experience with hot and cold chambers manufacturing is highly preferred. As an Assembly Engineer, you will be involved in coordinating and performing mechanical assembly activities required for chamber assembly, which may include cutting, drilling, tapping, and other relevant tasks. You will also assist with field/site installations of equipment and service activities when needed. The ideal candidate should have a problem-solving aptitude, a quality-focused approach, and be familiar with production assembly processes. Maintaining 5S, effective communication, and a willingness to learn are key attributes for success in this role. If you meet the qualifications and are interested in this position, please share your resume with us at Hrsiruvasri@gmail.com. This is a full-time, permanent position with an immediate start date. Thank you for considering this opportunity.,

Job Summary: We are seeking a skilled Assembly Engineer to join our jig manufacturing team. The role involves precision assembly of mechanical and pneumatic components to build jigs and fixtures used in industrial applications. The ideal candidate should be technically sound, hands-on with assembly tools, and capable of understanding technical drawings to deliver high-accuracy assemblies. Key Responsibilities: Assemble jigs, fixtures, and tooling systems as per engineering drawings. Align and fit mechanical components like plates, pins, bushes, guide blocks, and clamps. Integrate pneumatic systems: cylinders, solenoid valves, air pipes, etc. Read and interpret 2D/3D CAD drawings, part lists, and assembly instructions. Perform functional testing and validation of assembled jigs. Coordinate with design, CNC machining, and QC departments for fitment or quality issues. Maintain accurate documentation and records of each assembly project. Ensure compliance with safety and quality standards throughout the assembly process. Suggest improvements in jig design or assembly methods for better efficiency. Required Skills: Strong mechanical aptitude and hands-on assembly experience. Proficient in reading engineering drawings and BOMs. Familiarity with pneumatic fittings, ESD-safe assembly (if applicable), and functional testing. Skilled in using measuring tools (vernier, dial gauge, height gauge, etc.). Basic knowledge of welding, tapping, drilling, and grinding is a plus. Qualifications: ITI / Diploma / BE in Mechanical / Tool & Die / Mechatronics Engineering. 13 years of experience in jig/fixture/tool assembly (preferred in mobile/automotive/aerospace sectors). Ability to work independently as well as in a team environment. Work Environment: Workshop-based role with possible visits to customer sites for installation or support. Fast-paced and precision-focused manufacturing environment.

BE/Diploma in Mechanical Engineering Experience in mechanical assembly of electro-mechanical products/components Skilled in using hand tools, torque wrenches, power tools, pneumatic tools Ability to read and interpret mechanical drawings and assembly instructions Familiarity with fasteners, fittings, seals, and torque requirements Knowledge of basic electrical connections, wiring, and cable routing (added advantage) Conducting visual inspections and functional checks during assembly Ensuring assembly quality and adherence to processes Ability to troubleshoot assembly fitment issues Maintaining 5S and safety standards at the workstation

Design and development of high-precision electro-mechanical systems Develop and implement comprehensive testing and verification strategies Identify and mitigate risks associated with embedded software development & mechanical systems Required Candidate profile Bachelor’s or Master's degree in Electronics, Mechatronics, robotics, Aeronautical (Avionics). 8-12 years experience Strong electro-mechanical design instincts Basic in GD&T and tolerance stack-up.