Roles & Responsibilities: Should be able to prepare the SLD, electrical layout -Plan & sections, EKD, DSLP Layout, Electrical clearance layout, Earthing Layout, cable trench layout, switch yard illumination, control building drawings (Panel arrangement, earthing, small power, lighting and Lighting protection etc), cable schedule, bill of materials (BOMs) etc. Should be well versed with various busbar schemes. Should be able to review the equipment vendors drawings/documents. Should be able to interface with control and protection requirements and knowledge of review of schemes is desirable. Should be well versed with design calculation for Earthing design, Sag tension, DSLP, Busbar sizing, short circuit forces, Cable sizing, battery sizing calculation, equipment sizing etc. Main equipment specification preparation Supporting to tendering department by preparing the tender stage Bill of material (BOM), pre bid quarries, Tender stage Drawing, coordination with site Engineers for technical input of site for green field /brown field projects. Role Summary: This position will be responsible for all aspects of the engineering design oversight and proposal engineering management of multiple complex utility projects. Ownership of the project scope. Interface and coordination of other disciplines for high and extra high voltage substations (HV and EHV) for utility substations and Wind/solar Power plant switchyards. Qualifications & Skills: Minimum of a bachelors degree in engineering or technical discipline (Electrical or Electronics Engineering function) from a recognized university. Minimum of Eight (8) years of experience in Design and Engineering of GIS and AIS Substations projects for voltage level of 110kV and above. Understands interfaces with civil, mechanical, Control & protection / automation (SCADA) systems, system study. Must be self-motivated with an ability to balance multiple projects under tight deadlines. Must have excellent written and verbal communications skills, including ability to write clear and detailed technical reports, presentations and emails. Must be a supportive team member, able to work in a team well as work on self-directed independent projects. Must be proficient in AutoCAD, Microsoft Word, Excel and Outlook. Candidate profile, experience in ETAP, CDEGS, DIALUX, CYMCAP, PSCAD will be preferred. **H&MV Engineering is an equal opportunity employer** ed candidate profile

Major Roles & Responsibilities Preparing Protection Single Line diagram / schematics based on the technical specification / customer requirement. Selection and Ordering of Protection IEDs, Auxiliary Relays & SCADA/RTU system for the project. Should be able to review the equipment vendor s drawings/documents. Preparing interlocks and logics / utility practices for different bus-bar arrangement. Supporting to tendering department by preparing the tender stage Bill of material (BOM), pre bid quarries, Tender stage Drawing, coordination with site Engineers for technical input of site for green field /brown field projects. Preparing SCADA architecture and review of Telecom system (FOTE, PLCC, etc.) by major manufacturers. Preparing the detailed schematic and logic diagrams for control and protection panel. Preparing optimized Control cable philosophy and cable schedules. Should have performed CT, PT, cables, battery banks, battery chargers, auxiliary transformers, UPS sizing calculations. Tendering support, detailed engineering of Both AIS and GIS Substation projects. Performing relay setting calculations. Role Summary This position will be responsible for all aspects of the engineering design oversight and proposal engineering management of multiple complex utility projects. ownership of the project scope. Interface and coordination of other disciplines for high and extra high voltage substations (HV and EHV) for utility substations and Wind Power plant switchyards. Qualification/Requirements Minimum of a bachelor s degree in engineering or technical discipline (Electrical or Electronics Engineering function) from an recognized university. Minimum of four (4) years of experience in Secondary Design and Engineering of GIS and AIS Substations projects for voltage level of 110kV and above. Understands interfaces with primary, civil, mechanical engineering, Testing and commissioning Dept. Must be self-motivated with an ability to balance multiple projects under tight deadlines. Must have excellent written and verbal communications skills, including ability to write clear and detailed technical reports, presentations and emails. Knowledge of Protection relays, SAS, Plant SCADA and Telecom system (FOTE, PLCC, etc.) by major manufacturers. Team player with strong communication and interpersonal skills. Must be proficient in Microsoft Word, Excel and Outlook. Preference for the candidate having knowledge on the design tool like AutoCAD, E3 and EPLAN.

About Us: We are a leading HV Electrical Contracting company with a specialization in the design and construction of electrical substations. Our expertise lies in delivering full EPC (Engineering, Procurement, Construction) turnkey projects, primarily catering to the data centre and renewable sectors. Our comprehensive service offerings encompass both electrical and civil packages, ensuring a holistic solution for our clients. Job Overview: The Admin Executive is responsible for overseeing the daily operations of the office, ensuring it runs smoothly and efficiently. This includes managing office supplies, handling administrative tasks, supporting the team, and maintaining office organization and communication. Key Responsibilities: Office Management: Oversee daily office functions, including ordering supplies, managing equipment, and ensuring the office environment is organized and efficient. Administrative Support: Assist with scheduling meetings, making travel arrangements, and preparing reports and documents. Provide general support to managers and staff as needed. Team Coordination: Supervise and support office staff, ensuring they have the resources and guidance needed for their tasks. Communication: Serve as a point of contact for staff and external parties, handling calls, emails, and general inquiries. Facility Management: Ensure the office space is clean, safe, and well-maintained. Coordinate with building management for repairs and safety compliance. Budget & Expenses: Assist with tracking office-related expenses, managing budgets, and processing invoices. Health & Safety: Maintain office safety protocols and ensure the office complies with health regulations. HR Support: Assist with employee onboarding, maintain records, and help manage attendance and benefits. Qualifications & Skills: Bachelors degree required (preferably in Business Administration or related field). 5 or more years in office administration or a related field. Strong organizational and communication skills. Proficiency in Microsoft Office (Word, Excel, etc.). Ability to multitask and manage time effectively. **H&MV Engineering is an equal opportunity employer**

Looking for Lead Engineer candidates with 8+ years of experience Major Roles & Responsibilities - Preparing Protection Single Line diagram / schematics based on the technical specification / customer requirement. Selection and Ordering of Protection IEDs, Auxiliary Relays & SCADA/RTU system for the project. Should be able to review the equipment vendors drawings/documents. Preparing interlocks and logics / utility practices for different bus-bar arrangement. Supporting to tendering department by preparing the tender stage Bill of material (BOM), pre bid quarries, Tender stage Drawing, coordination with site Engineers for technical input of site for green field /brown field projects. Preparing SCADA architecture and review of Telecom system (FOTE, PLCC, etc.) by major manufacturers. Preparing the detailed schematic and logic diagrams for control and protection panel. Preparing optimized Control cable philosophy and cable schedules. Should have performed CT, PT, cables, battery banks, battery chargers, auxiliary transformers, UPS sizing calculations. Tendering support, detailed engineering of Both AIS and GIS Substation projects. Performing relay setting calculations. Role Summary – This position will be responsible for all aspects of the engineering design oversight and proposal engineering management of multiple complex utility projects. ownership of the project scope. Interface and coordination of other disciplines for high and extra high voltage substations (HV and EHV) for utility substations and Wind Power plant switchyards. Qualification/Requirements – Minimum of a bachelor’s degree in engineering or technical discipline (Electrical or Electronics Engineering function) from an recognized university. Minimum of four (8) years of experience in Secondary Design and Engineering of GIS and AIS Substations projects for voltage level of 110kV and above. Understands interfaces with primary, civil, mechanical engineering, Testing and commissioning Dept. Must be self-motivated with an ability to balance multiple projects under tight deadlines. Must have excellent written and verbal communications skills, including ability to write clear and detailed technical reports, presentations and emails. Knowledge of Protection relays, SAS, Plant SCADA and Telecom system (FOTE, PLCC, etc.) by major manufacturers. Team player with strong communication and interpersonal skills. Must be proficient in Microsoft Word, Excel and Outlook. Preference for the candidate having knowledge on the design tool like AutoCAD, E3 and EPLAN

Job Summary:. We are looking for a skilled Software Deployment Specialist / Patch Management Specialist to manage software deployments, patch management, and IT infrastructure maintenance. The ideal candidate will have experience with Tanium for deployment, along with expertise in Microsoft Server environments, Windows 10 & 11, Apple OSX, virtualization, sandboxing, and network security, Key Responsibilities:. Manage the end-to-end patch management lifecycle, including assessment, testing, deployment, and reporting, Develop and maintain patch management policies, procedures, and schedules, Deploy security patches, updates, and hotfixes across endpoints, servers, and applications using patch management solution, Ensure compliance with internal security policies and regulatory requirements, Collaborate with the Cybersecurity team to analyse vulnerability scan reports and prioritize patching based on severity levels, Work with Cyber security team to mitigate security threats related to unpatched systems, Track and report patch compliance metrics, including failed deployments and unpatched systems, Investigate and resolve patch deployment failures and compatibility issues, Provide technical support to teams for patch-related issues, Enhance automated patching processes to reduce manual intervention and downtime, Work on patching schedules to minimize impact on business operations, Required Skills & Experience:. Technical Expertise:. Strong experience with Microsoft Intune, Hands-on experience with Tanium for endpoint security and remediation, Knowledge of Windows patching processes, Familiarity with third-party application patching (Adobe, Java, etc,), Cybersecurity Knowledge:. Understanding of vulnerability management frameworks (e-g., CVSS, NIST, CIS), Experience working with Cyber security team to address security gaps, Other Skills:. Strong analytical and troubleshooting skills, Ability to work in fast-paced environments and prioritize tasks effectively, Experience with compliance frameworks (ISO 27001, NIST, CIS benchmarks) is a plus, Qualifications:. Education: Bachelor’s degree in computer science, IT, or a related field, Experience: Five or more years in software deployment, patch management, and IT infrastructure, **H&MV Engineering is an equal opportunity employer**. Show more Show less

Role & responsibilities Responsibilities: Perform power system simulation studies, including Load Flow, Voltage Regulation, Short Circuit Analysis, Relay Settings Calculation, and Protection Coordination. Conduct ARC Flash analysis and develop mitigation methods. Carry out Transient Analysis, such as TOV (Temporary Overvoltage), Lightning Impulse, and Switching Overvoltage studies. Calculate and provide Unit Protection for equipment like Transformers, Busbars, Lines, and Cables. Ensure adherence to relevant standards and guidelines applicable to power systems. Requirements: Proficiency in software tools such as ETAP and PSCAD. Hands-on experience with DIgSILENT Power Factory is an added advantage. Proficient in using MS Office. Strong communication skills and a good command of the English language Preferred candidate profile Must be conversant with the Power system simulation studies : Load flow, Voltage regulation, Short circuit study, Relay settings calculation and Protection co-ordination. ARC flash analysis and its mitigation method. Transient Analysis, viz : TOV, Lightning Impulse, Switching over voltage. Calculation and provision of Unit Protection, viz. Transformer, Busbar, Line, Cable. Reactive power compensation and Harmonic analysis : Optional Must have knowledge of relevant standards as applicable should be able to handle team and solve the technical problems Should have problem solving skills

As an organisation our Culture & Values are a critical part of our ability to meet the challenges of today s demanding utility market, enabling us deliver least cost solutions that do not compromise safety, quality, or customer service. H&MV Engineering is growing fast so this position presents a great opportunity for the right candidate, as we are looking for someone who will embrace the opportunity, and progress with the business as it grows. So, if you feel you are the right fit for H&MV, and the above Culture and Values resonate with you, then we would be delighted to hear from you. Roles & Responsibilities: Coordinate the entire bid process from initiation to submission, ensuring all deadlines are met. Liaise with engineering, procurement, finance, and project teams to gather technical and commercial information for bids. Review tender documents and clarify any requirements or ambiguities with relevant stakeholders, highlight any client requirement gaps & escalate. Prepare and format bid documentation, ensuring compliance with client specifications and company guidelines. Maintain and update the bid register and ensure proper documentation control. Support the preparation of pricing schedules, Project programme, BOQ, commercial terms, and contractual documents. Assist in risk analysis and highlight potential issues related to bids. Organize and schedule bid meetings and support follow-ups internally & client side. Ensure bids are submitted on time through the appropriate channels. Support the post-bid review process, including lessons learned and feedback incorporation. Maintain confidentiality and security of bid-related information. Keep abreast of industry trends, competitors, and market conditions relevant to H&MV engineering. Qualifications & Skills: bachelors degree in engineering, or related field preferred. Minimum of 2-4 years of experience in bid coordination, preferably in engineering, construction, or related industries. Strong understanding of H&MV engineering projects and terminology is an advantage. Excellent organizational and multitasking skills with strong attention to detail. Proficient in MS Office Suite (Word, Excel, PowerPoint, Project). Ability to work under pressure and meet tight deadlines. Strong communication and interpersonal skills. Ability to work collaboratively with cross-functional teams. Knowledge of tendering platforms and procurement processes. Problem-solving mindset with the ability to anticipate and mitigate risks.

We are seeking an experienced Lead Tendering Engineer with a strong background in the electrical T&D sector to join our team. The successful candidate will be responsible for leading the tendering process for HV substation projects, ensuring the accurate preparation of technical and commercial proposals. This role requires a deep understanding of HV substation engineering, strong project management skills, and excellent communication abilities to liaise with clients, suppliers, and internal teams effectively. Roles & Responsibilities: Lead the tendering process for HV substation projects, from initial inquiry to proposal submission, ensuring compliance with client requirements and project specifications. Conduct thorough technical and commercial assessments of project documents, including technical specifications, drawings, and contract terms and conditions. Prepare comprehensive and accurate technical and commercial proposals, considering cost estimates, project timelines, resource requirements, and risk assessments. Collaborate with various internal teams, including engineering, procurement, and project management, to gather necessary information and ensure timely and accurate tender submissions. Liaise with clients, suppliers, and subcontractors to clarify technical requirements, negotiate terms, and address any queries or concerns during the tendering process. Monitor market trends, competitor activities, and industry developments to ensure H&MV Engineering remains competitive and up to date with industry best practices. Support the commercial team in contract negotiations and provide technical expertise to ensure successful project award. Participate in tender review meetings to identify lessons learned, drive continuous improvement, and enhance the tendering process. Qualifications & Skills: Extensive experience in the electrical T&D sector, with a focus on HV substation projects. In-depth knowledge of HV substation engineering principles, including substation design, equipment specifications, protection systems, and control systems. Proven track record of leading and managing the tendering process for HV substation projects, including the preparation of technical and commercial proposals. Strong project management skills, including the ability to manage multiple tenders simultaneously, prioritize tasks, and meet deadlines. Excellent communication and interpersonal skills, with the ability to effectively collaborate with clients, suppliers, and internal stakeholders. Sound commercial acumen, with the ability to understand and negotiate contract terms and conditions. Proficient in using tendering tools and software, as well as MS Office applications. Demonstrated problem-solving skills and the ability to analyze complex technical requirements. A proactive approach to work, with a high level of attention to detail and a commitment to delivering quality results. Preferred Qualifications: Bachelor s degree in Engineering, Quantity Surveying, Business, or a related field. Eight plus years of relevant experience in tendering, estimation, or proposal management Additional certifications or training related to HV substation engineering, project management, or commercial negotiations is a plus. **H&MV Engineering is an equal opportunity employer**

Job Description H&MV Engineering is a leading global Provider of Specialist Design, Engineering and Construction Services across a variety of key sectors including Data Centres, Renewables and Transmission and Distribution Utilities. Our ingenuity is developed and strengthened by 3 decades of experience delivering EPC projects across the world. We have active sites and offices across the EMEA region, where our local expert staff provide engineering solutions to our clients. H&MV Engineering is growing fast so this position presents a great opportunity for the right candidate, as we are looking for someone who will embrace the opportunity, and progress with the business as it grows. So, if you feel you are the right fit for H&MV, and the above Culture and Values. Roles & Responsibilities: Should be able to prepare the SLD, electrical layout -Plan & sections, EKD, DSLP Layout, Electrical clearance layout, Earthing Layout, cable trench layout, switch yard illumination, control building drawings (Panel arrangement, earthing, small power, lighting and Lighting protection etc), cable schedule, bill of materials (BOMs) etc. Should be well versed with various busbar schemes. Should be able to review the equipment vendor s drawings/documents. Should be able to interface with control and protection requirements and knowledge of review of schemes is desirable. Should be well versed with design calculation for Earthing design, Sag tension, DSLP, Busbar sizing, short circuit forces, Cable sizing, battery sizing calculation, equipment sizing etc. Main equipment specification preparation Supporting to tendering department by preparing the tender stage Bill of material (BOM), pre bid quarries, Tender stage Drawing, coordination with site Engineers for technical input of site for green field /brown field projects. Role Summary: This position will be responsible for all aspects of the engineering design oversight and proposal engineering management of multiple complex utility projects. Ownership of the project scope. Interface and coordination of other disciplines for high and extra high voltage substations (HV and EHV) for utility substations and Wind/solar Power plant switchyards. Qualifications & Skills: Minimum of a bachelor s degree in engineering or technical discipline (Electrical or Electronics Engineering function) from a recognized university. Minimum of four (8) years of experience in Design and Engineering of GIS and AIS Substations projects for voltage level of 110kV and above. Understands interfaces with civil, mechanical, Control & protection / automation (SCADA) systems, system study. Must be self-motivated with an ability to balance multiple projects under tight deadlines. Must have excellent written and verbal communications skills, including ability to write clear and detailed technical reports, presentations and emails. Must be a supportive team member, able to work in a team well as work on self-directed independent projects. Must be proficient in AutoCAD, Microsoft Word, Excel and Outlook. Candidate profile, experience in ETAP, CDEGS, DIALUX, CYMCAP, PSCAD will be preferred. ** H&MV Engineering is an equal opportunity employer**

About Company: H&MV Engineering is a trusted name in the electric power transmission industry. Established in 1997, we have quickly become a leading specialist in high voltage Transmission and Distribution systems. Our leading position in the market allows us to expand our services worldwide we re currently present in EU, UK, Asia and South Africa, exploring further possibilities to expand and finding ways to leverage the experience we gain internationally. Our main expertise is in the design and build of substations up to 420 kV. We have successfully completed projects across many sectors Transmission and Distribution, Renewables, Data Centres, Manufacturing and Pharmaceuticals, to name a few. H&MV is currently seeking a Document Controller to join their busy Limerick office to help support Projects and Project Teams. Roles & Responsibilities: Working as part of a high-performance project team, the document controller shall organise and maintain the Project Document Plan and provide the team with updates on a timely basis. Quality checks all documentation prior to sharing with client. Assist in the preparation of technical documents. Distribute reports & updates to Project Teams. Record and issue project meeting minutes as required. Store documentation as per Project Management and Document Control procedures. Maintain confidentiality around sensitive information in line with legal regulations. Provide guidance to users in correct use of document management system to ensure consistency of system usage. Assist with audit preparation and support. Participation in ad hoc project work and other administrative duties as requested by the Project Management Team. Provide day-to-day support to the project team and ensure quality systems are executed appropriately according to requirements. Qualifications & Skills: Ideally possess 2 years experience working in a Document Controller/Engineering/Project Administration position coming from an engineering/construction environment. Familiar with Quality Standards/Document Control Procedures Excellent planner and organizer with strong communication skills Dependable team player with strong leadership skills Ability to prioritise workload. Attention to detail. Self-motivated/able to work on their own initiative. Strong administration skills and IT literate, i.e., EDMS software, MS Office suite, SharePoint etc. **H&MV Engineering is an equal opportunity employer**