195 Dcs Operation Jobs

Role & responsibilities Perform routine field operations including start-up, shutdown, and equipment monitoring. Conduct field rounds and ensure safe operation of all unit equipment. Adhere strictly to SOPs, safety procedures, and operational checklists. Coordinate with control room and report abnormalities to shift in-charge. Handle equipment isolation, depressurization, and maintenance support. Maintain operational logs, safety registers, and shift handover notes. Support emergency response as per HRRL protocols. Participate in PFD, P&ID, and line tracing familiarization. Preferred candidate profile ITI/Diploma in relevant engineering discipline. 2 - 5 years experience in water treatment plant, refinery or continuous process plant, Petrochemical engineering, Fertilizer/ Oil & Gas processing industry preferred. Physically fit and safety-conscious with good communication skills. Experience in pre-commissioning, commisioning and operation of Utilities will be preferable.

Role & responsibilities Monitor and control plant operations via DCS system. Take immediate corrective actions on process deviations. Maintain DCS logbook and shift records accurately. Coordinate effectively with process engineers and field operators. Report abnormalities promptly to the section head. Support during plant emergencies as per HRRLs emergency response plan. Experience in Refinery / Petrochemical industries. Familiar with day-to-day operations and maintenance requirements, Familarity with PLC / DCS based control system shall also be required. Preferred candidate profile B.E./ B.Tech in Chemical / Instrumentation / Petrochemical / Mechanical Engineering, M.Sc Chemistry. Hands-on experience in DCS operations (Honeywell, Yokogawa, etc.). Fluent in Hindi and English. Vigilant, proactive, and safety-conscious.

Well developed Trouble shooting capabilities. Good communication and organisation skills. Extensive knowledge of control room DCS operations Required Candidate profile Emergency handling and response.Minimum of 5 years experience within the Oil & Gas processing / Refining / Petrochemical field in DCS operations)

To monitor shift activities, plan and ensure timely production completion activities as per plan and dispatch thereby ensuring optimal utilization of resources and esuring quality standards being maintained at all time.

Walk in Interview for the post of Production Supervisor/Executive @ Vadodara Location on 17th September 2025 Details are as follows:- Job Location: Jambusar, Gujarat Qualification: - B. Sc. / M. Sc. (Chemistry) / Diploma (Chemical) or B.E./B. Tech in Chemical Experience for Production: 4 to 9 years Experience for Supervisor & Executive role, Interview Date: 17th September 2025; Wednesday Interview Location: Baroda Productivity Council, Productivity House, 2nd floor,BPC Road, Alkapuri, Vadodara, Gujarat - 390007 E-mail- jmb.onboarding@piind.com Requirement for Production Candidates must have hands-on experience with DCS panel operation or filed operation in a DCS-operated plant Handling of multiple unit operations and processes simultaneously Knowledge of safety practices is a must. Experience in handling hazardous chemicals and solvents. Roles and Responsibilities:- 1. operational knowledge of YOKOGAVA DCS 2. Production planning, control and executing batches, optimization in the plant. 3. Supervising of batches charging and verification of RM quintets 4. Monitoring and maintaining of the parameter as per SOP 5. Handling Of solvent recovery process. 6. Basic knowledge of process safety standards (MSDS) & general industry standards 7. Distillation Column (Atmospheric & vacuum), 8. Formulation of Final products for dispatch, packaging of the material, final products, at the warehouse. 9. Operating of GLR and SS reactor, Centrifugal pump, piston pump, vacuum pump, Jet Ejector system. 10. Safety Knowledge, Permit

Role & responsibilities : Responsible of DCS operations, plan to attain the manufacturing targets and of implementing various manufacturing practices to increase production . Should have knowledge and working experience of a) DCS b) PLC c) QCS operation related to Paper machine. Overall responsible for shift operation of Paper machine Preferred candidate profile : Preferred with BSc Chemistry, B Tech Chemical, BASc Pulp and Paper.

Well developed Trouble shooting capabilities. Good communication and organisation skills. Extensive knowledge of control room DCS operations Required Candidate profile Emergency handling and response.Minimum of 5 years experience within the Oil & Gas processing / Refining / Petrochemical field in DCS operations)

Role - Shift Officer (Pilot Plant) Purpose : To operate and monitor pilot plant equipments / operations safely and efficiently Ensuring experimental/scale-up batches are produced according to defined procedures (SOP). Recording process data. Maintaining the cleanliness and readiness of the plant. Challenges of the role: Accurately following varying process parameters for multiple experimental batches. Responding to process deviations promptly and safely. Maintaining a high level of attention to detail to ensure quality and safety. Working in shifts, including nights and weekends, while maintaining focus and consistency. Handling chemicals safely and always using appropriate PPE. Principal Accountabilities & Responsibilities : Operate pilot plant equipment as per approved (SOP) Monitor process parameters (temperature, pressure, flow, level) and adjust as instructed by the Shift In-charge. Record observations, readings, and any deviations accurately in logbooks. Follow all safety guidelines, wear required PPE, and report any unsafe conditions immediately. Assist in start-up, shutdown, charging, sampling, and cleaning of equipment. Start-up, shutdown, and cleaning of pilot plant equipment following SOPs. Support small-scale maintenance activities like equipment cleaning, tightening connections, and checking for leaks. Maintain good housekeeping standards in the pilot plant area. Participate in toolbox talks, safety drills, and EHS training sessions. Support other team members to ensure smooth shift operations and handover. Maintain detailed logbooks and batch records of all trials, including observations, deviations, and process changes. Ensure proper calibration and functionality of instruments and sensors. Participate in safety drills, risk assessments, and HAZOP studies for new processes. Key Skills & Competencies: Good understanding of chemical process operations and pilot-scale equipment. Basic knowledge of safety procedures and chemical hazards. Ability to follow written instructions and standard operating procedures. Basic troubleshooting skills and attention to detail. Good communication and teamwork skills. Good understanding of PFDs, P&IDs, and basic instrumentation. Awareness of chemical handling, MSDS, and safe operating practices. Education : Diploma (Chemical), MSc, BSc (Chemistry) Nature of Experience : Fine chemicals, specialty chemicals, batch process industry Experience : 2 to 5 years Role Competencies : Good interaction/communication skills.

Role - DCS Engineer (Pilot Plant) Purporpose : Ensure safe, efficient, and reliable operation of the Distributed Control System (DCS). Configuring the recipe, monitoring, troubleshooting, and optimizing the DCS to support scale-up trials. Providing automation support, implementing control logic modifications, and maintaining system integrity. Challenges of the role: Managing frequent changes in process recipes, control logic, and interlocks due to experimental batches. Supporting operators and shift In-charges with DCS troubleshooting under time constraints. Driving the regular process in absence of shift-in-charge. Principal Accountabilities & Responsibilities Operate, monitor, and maintain the DCS to ensure smooth plant operation. Develop, modify, and test DCS control setpoints, strategies, interlocks, alarms, and graphics as and when required. Ensure robust data logging and trend availability for process analysis. Review the process trends and report to plant manager on any abnormalities observed. Ensure all process interlocks are implemented and simulated Coordinate with the Instrumentation and ABB for complex issues and upgrades Provide first-line troubleshooting and support for DCS-related issues during shifts. Zero incidents and adherence to safety protocols Start-up, shutdown, and emergency handling of process units. Acknowledge and analyse process alarms; take corrective actions promptly. Maintain plant operation within specified limits and comply with standard operating procedures (SOPs). Record critical parameters like temperature, pressure, flow, level, and maintain logbooks. Prepare daily shift reports, production summaries, and handover notes. Position Specification Education: B.E/ B.Tech - Chemical Engineering Nature of Experience: Fine chemicals, Specialty chemicals, Batch process industry Duration of Experience: - 5 to 8 Years

Monitor and control the plant operations through Distributed Control Systems (DCS) to ensure efficiency and safety. - Maintain optimal process parameters for bromine production and troubleshoot any deviations. - Handling Destillinstion Collumn.

Job Summary The Senior Project Coordinator will play a crucial role in managing and coordinating projects within the MES and DCS domains. With a focus on manufacturing and supply chain the candidate will ensure seamless project execution in a hybrid work model. This role requires a blend of technical expertise and organizational skills to drive project success and contribute to the companys growth. Responsibilities Coordinate and oversee project activities related to MES and DCS systems to ensure timely completion. Collaborate with cross-functional teams to align project goals with business objectives. Monitor project progress and provide regular updates to stakeholders to maintain transparency. Identify potential risks and develop mitigation strategies to minimize project disruptions. Facilitate communication between technical teams and management to ensure alignment. Manage project documentation and ensure compliance with company standards. Utilize technical expertise in MES and DCS to troubleshoot and resolve project issues. Implement best practices in project management to enhance efficiency and effectiveness. Support the development of project plans and schedules to meet deadlines. Analyze project data to identify trends and opportunities for improvement. Ensure that project deliverables meet quality standards and client expectations. Contribute to the continuous improvement of project management processes. Leverage domain knowledge in manufacturing and supply chain to optimize project outcomes. Qualifications Possess strong technical skills in MES and DCS systems with proven experience. Demonstrate excellent organizational and coordination abilities. Exhibit strong problem-solving skills and attention to detail. Have experience in the manufacturing and supply chain domains is advantageous. Show proficiency in project management tools and methodologies. Communicate effectively with diverse teams and stakeholders. Adapt to a hybrid work model with a focus on productivity and collaboration.

About The Role Skill required: Financial Planning & Analysis - Financial Planning and Analysis (FP&A) Designation: Finance Process & Ops Specialist Qualifications: BCom Years of Experience: 7 to 11 years About Accenture Accenture is a global professional services company with leading capabilities in digital, cloud and security.Combining unmatched experience and specialized skills across more than 40 industries, we offer Strategy and Consulting, Technology and Operations services, and Accenture Song all powered by the worlds largest network of Advanced Technology and Intelligent Operations centers. Our 699,000 people deliver on the promise of technology and human ingenuity every day, serving clients in more than 120 countries. We embrace the power of change to create value and shared success for our clients, people, shareholders, partners and communities.Visit us at www.accenture.com What would you do? You will be aligned with our Finance Operations vertical and will be helping us in determining financial outcomes by collecting operational data/reports, whilst conducting analysis and reconciling transactions.Financial planning, reporting, variance analysis, budgeting and forecastingFinancial planning and analysis (FP&A) refers to the processes designed to help organizations accurately plan, forecast, and budget to support the company s major business decisions and future financial health. These processes include planning, budgeting, forecasting, scenario modeling, and performance reporting. What are we looking for? Ability to establish strong client relationshipAbility to meet deadlinesAbility to perform under pressureAbility to work well in a team Roles and Responsibilities: In this role you are required to do analysis and solving of moderately complex problems May create new solutions, leveraging and, where needed, adapting existing methods and procedures The person would require understanding of the strategic direction set by senior management as it relates to team goals Primary upward interaction is with direct supervisor May interact with peers and/or management levels at a client and/or within Accenture Guidance would be provided when determining methods and procedures on new assignments Decisions made by you will often impact the team in which they reside Individual would manage small teams and/or work efforts (if in an individual contributor role) at a client or within Accenture Please note that this role may require you to work in rotational shifts Qualification BCom

Job Description Desk Operations Location: Ratnagiri (4x300 MW Thermal Power Plant) Reports to: Shift Charge Engineer (SCE)/HOD Role Purpose Responsible for safe, efficient, and systematic operation of the thermal power plant from the control room, ensuring reliability, compliance, and adherence to safety and environmental standards. Key Responsibilities Operate and monitor unit parameters from the control room as per SOPs. Ensure adherence to PTW, LOTO, and safety systems during isolation, normalization, startup, and shutdown. Handle plant emergencies and support in AOH/COH/Shutdown/Commissioning activities. Maintain accurate logs, checklists, and SAP notifications for abnormalities. Guide field engineers during routine, isolation, and emergency operations. Optimize plant performance by maintaining heat rate, efficiency, PLF, and availability. Conduct incident/abnormality analysis and prepare RCFA reports. Operate auxiliary systems such as RO Plant, HCSD, and HVAC from control room. Participate in audits, safety committee meetings, and TQM activities. Ensure compliance with IMS, ISO, and safety documentation. Educational Qualification Diploma / Degree in Mechanical or Electrical Engineering PGDC in Thermal Power Plant (preferred) Experience Diploma: Minimum 10 years (in >100 MW Thermal Power Plant) Degree: Minimum 5 years (in >100 MW Thermal Power Plant) PGDC: Minimum 5 years (in >100 MW Thermal Power Plant) Key Competencies Strong technical and operational knowledge of thermal power plants Safety & compliance orientation Problem-solving and decision-making skills Planning and prioritization ability Good communication and interpersonal skills Leadership and team guidance

POSITRON ENERGY PRIVATE LIMITED is looking for DCS SUPERVISOR to join our dynamic team and embark on a rewarding career journey DCS Operation and Maintenance:Supervise the day-to-day operation and maintenance of the Distributed Control System Monitor system performance, troubleshoot issues, and implement corrective actions to minimize downtime Team Leadership:Lead a team of control system engineers and technicians Provide guidance, training, and support to team members to enhance their skills and ensure a high level of expertise System Optimization:Collaborate with process engineers and other relevant departments to optimize DCS configurations for improved efficiency and productivity Implement system upgrades and enhancements as needed Emergency Response:Develop and implement emergency response procedures for DCS malfunctions or failures Coordinate with relevant personnel to quickly address and resolve critical issues Compliance and Documentation:Ensure compliance with industry regulations and standards related to control systems Maintain accurate documentation of DCS configurations, changes, and troubleshooting procedures Training and Development:Conduct training programs for DCS operators and other relevant personnel Stay updated on the latest developments in control system technology and share knowledge with the team

Power plant details: - 2* 40 TPH AFBC Boiler & 15 MW BHEL Make Turbine with working Pressure 62.6 Kg/Cm2, Water cooled condenser, counter flow cooling tower Requirement- Operation Shift In-charge, BOE Certified, Diploma/BE with min 5 to10 years of experience in CPP desk operation. Job Responsibility of Operation Shift In-charge Must focus more on desk operation. Desk Operation of Boilers & turbine and its Associated auxiliaries. Boiler preparation for light up and smooth operation with DCS, auxiliaries ESP, APRDS, coal handling plant, ash handling plant, air compressor, fan & pumps. Water treatment by anion, cation exchanger units. Operational knowledge about turbine, condenser, cooling tower, etc. Independently plan, co-ordinate and manage every aspect of site operation. Co-ordination with maintenance team. Ensure compliance & implementation of the terms and conditions of operation & maintenance agreement Ensure compliance with the statutory laws, safety & environment protection standards Check the healthiness of equipment in shift wise operation and note down the parameters through walk by inspections at the concerned areas Trouble shooting of Boiler & Turbine and its related equipment Emergency handling such as plant black-out, problems in coal feeding, water & steam leakages, etc. Defects to be listed out and coordinate with concern team for rectification Maintain the housekeeping of department Mandatory Requirements Must having minimum 5 years of Hand-on experience in AFBC Boiler (with minimum working pressure of 60kg/cm2 minimum capacity of 40 TPH) and Turbine Operation and Maintenance Must be read and write in English & Hindi Managing the shift manpower Ensure the 100% safety compliance Responsible for ensuring the safety of self and team members Vendor must ensure discipline and adherence of our Company H&S and HR policies & guidelines for their workmen working inside the company and those residing at Company colony premises. Statutory requirements such as PF / ESI / WC / Bonus / Gratuity are in vendor scope. Vendor must adhere to any other statutory compliance of Company H&S guidelines and HR policies. Vendor must ensure manpower availability Within two days (in case of attrition/absenteeism from more than week) All PPEs as per the job requirement is considered in vendor scope. Vendor is requested to submit the best offer meeting the above requirements and vendor has to share the clients list & Resume of manpower for our reference. ACC will conduct interview for the manpower before finalizing the contract and recruitment by vendor is based on the final consent from Company . The concerned person must be medically fit, young & energetic with good understanding of Health & safety systems and good emergency handling & troubleshooting skills. Benifits :- M/s Company will provide the accommodation either on sharing or individual quarter as per the availability. Company is just 1.5KM away from the Colony, Vendor has to arrange their own vehicle for transportation. if you are intersted please share your cv in below mail id or whatsapp :- Rahul.b@randstad.in Rahul 8178482052

Job Description Summary Lead overall operations of a Global Engineering & Competency Centre (GECC) team which delivers end to end solution for multiple Regions Projects and ensure Proper execution of the customer orders in full satisfaction to the customer. Lead, coach, and develop operational teams for respective Region across the Globe. Responsible for the operational performance of Grid Automation for the execution phase (OTR) of Global projects and associated services including highest degree of Safety, good quality, timely delivery and customer satisfaction in full compliance with GE Vernova Way. Job Description Essential Responsibilities Responsible for Basic and Detailed Design of DCS/Scada for Grid Automation Projects based on inputs received from respective Regions. Support the deployment of world-class processes, practices, methods and harmonized tools for engineering supported by Grid Automation Global Operations. Lead technical teams comprising of GE Vernova Internal members as well as Contractors to coordinate day-to-day execution as per plan along with Platform setup. Hold teams accountable for their commitments, removing roadblocks in their work, leveraging organizational resources to improve capacity. Responsible for Performance Appraisal, People growth & Talent Retention for their team members. Take Lead role in supporting ITO team for any technical clarification in liaise with respective engineering leader. Demonstrate superior decision making, persuasion and influencing skills to align Internal & external customers with project goals and execute the plan in the given time and budget Facilitate in structuring the operations in line with the Region delivery model and footprint and ensure all KPI targets are met on time. Ensure proper Technical competency Management development of the skill sets and capacity building within the team to meet the business requirement on a continuous basis. Promote decision making processes, Deploy Lean tools, Drive root cause analysis (RCA) to address project issues, identify and implement corrective & preventive actions with a continuous improvement mindset. Be responsible for building strong long-term relationships with internal/external customers within the Regions with a common goal Ability to travel to client sites (on need basis) and proficient in leading virtual meetings/conference with internal and external customers. Promote a safe working environment and ensure compliance with applicable EHS policies and Integrity. Qualifications / Requirements Bachelors degree in engineering from an accredited university or college. Experience above 10 years in leading projects/team and multi-cultural teams. Proven ability leading remote team members creating a single, coordinated, and high-effective team. Strong business acumen with successful management experience and discipline in managing the day-to-day business, Autonomous and strong resilience. Strong interpersonal and leadership skills that build a connection to the cross functional teams through personal involvement, inclusivity, and trust. Proven ability to influence and drive change through exceptional written and verbal communication skills. Ability to drive constant improvement in process, and ability to achieve organizational goals. In-depth knowledge of automation electrical control systems, SCADA/DCS systems, and networking communication protocols. Ability to interface with technical experts when required (engineering, expertise). Demonstrated ability to analyze and resolve problems. Hands on experience with DS Agile Systems

Your new role challenging and future-oriented Responsible for carrying detailed engineering, planning and scheduling for the below Instrumentation and Control (I C) package for power generating station in order to meet performance and contract specifications. Turbine supervisory Panel Governor, vibration monitoring Over speed protection system Control and Protection logic for steam turbines Auxiliary of various configuration Drawings like P ID, instrument hook-up, cable tray routine Documents like instrument index, instrument datasheets, DCS I/O list, setting list Load sharing and governor control for various Network and Turbine operating modes Selection and specification of various field instruments and junction box Cable and earthing engineering Familiar with reading and interpreting PID, control narratives. Knowledge of PLC/DCS system of is an added advantage Experience in EPC Engineering is an added advantage Experience on Site (On-field) is an added advantage Conversant with Indian and International codes standards viz IS, IEC, Knowledge of Industry Norms and Standards, field instrumentation and devices, standard control strategies. To partner the Project team to Execute orders in line with planned cost and time schedule, follow work procedures for compliance with quality systems and statutory requirements. Provide support to Project Purchase Groups by Freezing Purchase Specification, interactions with Vendors and evaluations of offers in implementing the technical and contractual requirement. Provide support to quality Site team for factory and site acceptance test ( SAT FAT ) Knowledge of schematic preparation and component selection for control Panels. We dont need superheroes, just super minds BE IC with experience of 8-12 Years in Thermal Power Plant Instrumentation and control Design Operations. Possess good communication, interpersonal skills and willingness to work in inter disciplinary teams. Hands on experience in AutoCAD drawings for the above categories of drawings. Hands on experience standard tools like MS Visio, MS Access MS Excel. Weve got quite a lot to offer. How about you

The purpose of this position is to execute the plan ensuring the on time production of batches in the Plant and adherence of the personnel to the standard operating procedures. Operating the plant Through DCS panel & managing field plant activities to comply QHSSE requirement with conservation of natural resources / utilities / RM. Key Responsibilities (State the primary duties and tasks of the position) • Provide confirmation to operator for batch charging. • Ensure process records are maintained in batch card. Where required call for the same for cross verification with panel readings. • Check record of charging qty, pressure, flow, temp, unloading etc (as applicable) in batch card. • Be vigilant in process monitoring, visual checks while batch is in process and coordinate with operator / shift in-charge for field report, process conformity and abnormalities observed, if any. • Maintain communication and coordination with the / shift in-charge while batch is in process. • Highlight deviations immediately to avoid rework / failure and control delay in delivery. • Check the labels for lot nos, batch nos etc prior to its issue for fixing on packages. • Ensure that necessary fitments and checks prior to tanker unloading or loading start-up are done. • Maintain all necessary records and provide details of process summary in shift Log books including those related to Safety, Quality, Mechanical problems / repairs and process changes • Implement / Maintain HSE practices in all activities. • Ensure that batch data in the DCS is archived properly and can be retrieved when required. • Maintain list of interlocks ensure that the same are in protected condition to avoid inadvertent use. HR Venkateswarlu K 9676590526

Responsible for the designing, controlling, and maintaining the distributed control system (DCS) to control the uninterrupted operations of the Boilers, Ash Handling Plant (AHP), and precipitators (ESP).

Role & responsibilities : Role requires a highly skilled individual who can safely and efficiently manage all aspects of boiler operations, including ensuring compliance with safety regulations and industry standards. Operate and monitor boiler systems to ensure efficient, safe, and reliable operation. Adjust pressure, temperature, and fuel flow to maintain optimal performance. Monitor indicators and controls to ensure that the boiler operates within safe limits and parameters. Perform routine maintenance, including inspections, cleaning, and minor repairs. Troubleshoot boiler issues and coordinate with maintenance staff for major repairs. Adhere to safety standards and regulations, including those set by OSHA, EPA, and local authorities. Report any safety concerns or hazards. Ensure the proper management of fuel sources, water levels, and water treatment to optimize boiler efficiency Maintain accurate logs of boiler performance, maintenance activities, and any incidents. Complete necessary reports as required by regulatory agencies. Assist with other plant maintenance activities as needed. Participate in continuous improvement initiatives. Ensuring Efficient and Safe Boiler Operation

Boiler Operation:Operate and control high-pressure boiler systems in a safe and efficient manner Monitor boiler parameters, such as pressure, temperature, and fuel levels Maintenance and Inspection:Conduct regular inspections of boilers and associated equipment to identify and address potential issues Perform routine maintenance tasks to ensure optimal performance Safety Compliance:Adhere to all safety regulations and procedures related to boiler operations Conduct safety checks and implement measures to prevent accidents or malfunctions Emergency Response:Respond promptly to any emergency situations, including equipment failures or malfunctions Implement emergency shutdown procedures when necessary Recordkeeping:Maintain accurate records of boiler operation, maintenance activities, and inspections Compile and submit reports as required by regulatory authorities Troubleshooting:Identify and troubleshoot issues related to boiler operation Collaborate with maintenance and engineering teams to resolve complex problems Efficiency Optimization:Implement measures to improve the energy efficiency and performance of boiler systems Recommend and implement upgrades or modifications when necessary Team Collaboration:Communicate effectively with other operators, maintenance personnel, and supervisors Collaborate with the engineering team on projects and modifications Training and Compliance:Stay informed about changes in regulations, technologies, and best practices in boiler operations Participate in training programs to enhance skills and knowledge

Designation : Instrument Engineer Qualification : BE Instrumentation Experience :3+Years in DCS and PLC system in working CTC :Best in industry Location : Bhavnagar

Role & responsibilities 1. Knowledge of ABB DCS Symphony Harmony with skill set of understanding & building logics, Tag database creation, Tag Building in HMI. 2. Verification of software checks regarding ABB DCS Symphony Harmony system & shall take immediate action at site regarding any problem of software patches. 3. EWS Server & PGP application checks and sorting out the problems at site related to software, hardware etc. 4. Historian server checks and sorting out the problems at site related to software, hardware etc. 5. Performance analysis of each and every BRC-300/400controller with suitable corrective actions & report. 6. Redundancy checks for the Communication Network modules and other redundant modules and NIS/NPM controllers also. 7. Instrumentation System Availability. 8. Corrective/ Breakdown Maintenance/Preventive Maintenance Compliance 9. Calibration Accuracy/Error Rate Number of Instrumentation Failures / Trips. Preferred candidate profile Workable SAP knowledge High esteem and energetic.

1) Expertise in Sales DCS of Honeywell, ABB, Siemens. 2) Best if already done sales in Sugar Industries. 3) Driving sales, Sales Targets. 4) Coordinating the flow of information for sales activities, including leads, billings, orders, contracts.

1) Expertise in Sales DCS of Honeywell, ABB, Siemens. 2) Best if already done sales in Sugar Industries. 3) Driving sales, Sales Targets. 4) Coordinating the flow of information for sales activities, including leads, billings, orders, contracts.