277 Cmm Jobs

Develop, review, and update Component Maintenance Manuals (CMMs) as per customer and industry standards. Interpret engineering drawings, service bulletins, and design data for creating accurate maintenance procedures. Ensure compliance with international standards such as ATA iSpec 2200 and S1000D where applicable. Work closely with engineering, quality, and customer teams to resolve technical queries. Perform quality checks and peer reviews to maintain high documentation standards. Update existing manuals based on engineering changes, modifications, and customer feedback. Required Skills & Experience 2 3 years of experience in aerospace technical publications with focus on CMM authoring . Good understanding of ATA iSpec 2200 and S1000D standards. Ability to read and interpret engineering drawings, parts lists, and technical data . Proficiency in authoring tools such as Arbortext/FrameMaker, or SGML/XML-based tools . Strong communication and collaboration skills. Attention to detail with a commitment to quality and accuracy.

RESPONSIBILITIES The SPE (Supplier Performance Engineer) develops and maintains relationships with suppliers to ensure they are executing our purchase orders in accordance with TE Grid AD&M requirements. Participate in the company initiative to expand the supply base globally. Collaborate with all stakeholders (internal & external) for sustained annual performance targets across quality, delivery, and cost with nominated critical poor-performing suppliers. Primary Activities Drive supplier selection, defined by the Strategic Sourcing Plan, through robust qualification processes. Support, collect, evaluate, and perform audit requests from the product lines. Confers with suppliers and analyzes supplier questions to determine factors affecting performance (quality, delivery, and cost). Perform periodic & surveillance supplier audits and coordinate supplier self-assessments as required. Evaluates supplier quotes and services to determine if they are compatible with company objectives and supplier capacities & capabilities. Identify competency gaps within the supply chain process by analysis of Key Performance Indicators and intelligence gathering to develop, introduce, and lead supplier improvement plans. Works with product lines and global commodity leaders to address critical issues related to customer needs and supplier performance. Identify potential new suppliers and prepare a development plan. Develop and maintain communications with all levels of staff and suppliers by communicating openly and honestly and treating all people with dignity, respect, and courtesy. Provide leadership during investigations of major problems and or special projects, focusing on developing working relationships with suppliers and the supply chain about product development and procurement of parts. CRITICAL EXPERIENCE Good knowledge of manufacturing processes such as mold design, stamping, and machining. Experience in handling measurement equipment as a gauge to CMM. Capable of drawing, reading & understanding the impact of tolerance w.r.t. manufacturability. Strong communication skills, both written and verbal. Proficient in MS Office Suite, including advanced Excel and PowerPoint. Previous SAP experience or training is a plus. Ability for periodic travel required

We are seeking an experienced CMM Engineer, with 1. CMM Operating & Programming (Archocad Software) 2. Layout Inspection 3. Inward Inspection 4. PDI Inspection 5. Drawing readings 6. System knowledge 7. Process Audit Required Candidate profile Experienced with mechanical background. Should have basic knowledge of forged or machined components. Must be Use CMM machines and program. Perks and benefits (1) overtime (2) lunch(3) ESIC (4) EPFO

Job Title: CNC Swiss Machinist Location: Remote Position Overview We are seeking a CNC Swiss Machinist to join our production team. This role is responsible for operating and maintaining CNC Swiss machines in a collaborative environment, ensuring high-quality output that meets medical device standards. While prior experience is preferred, training will be provided in blueprint reading, geometric dimensioning and tolerancing (GD&T), inspection methods, and tooling adjustments. Key Responsibilities Operated and maintained multiple CNC Swiss machines in a production environment. Performed daily preventive maintenance on machines to support consistent operations. Conducted in-process inspections to verify quality using calipers, micrometers, visual checks, and programmed CMM equipment (training provided). Read and interpreted blueprints and applied basic GD&T principles (training provided). Made tooling changes and offsets per production layouts (training provided). Ensured compliance with all safety protocols and company guidelines. Documented production status, inspection results, and communicated progress or quality issues with team members and supervisors.

We are seeking a skilled CMM Programmer responsible for programming, operating, and maintaining Coordinate Measuring Machines (CMM) to ensure precision inspection of components, tools, and assemblies in line with customer and industry standards.

Job Title: VMC Operator & Programmer Location: talawade Salary 20000 to 30000 1 to 3 years experience Department: Production / VMC Machining Reports To: Production Manager / CNC Shop Supervisor Job Summary: The VMC Operator & Programmer is responsible for creating CNC programs, setting up VMC machines, and executing machining operations to manufacture high-precision components as per technical drawings. This dual-role position requires expertise in CNC programming (G-code, M-code), machine operation, tool selection, and quality inspection. Key Responsibilities: Programming: • Develop and write CNC programs (G-code, M-code) for VMC machines using CAD/CAM software (e.g., Mastercam, Fusion 360, SolidCAM). • Optimize machining strategies for cycle time reduction and tool life. • Simulate and verify programs to avoid collisions or errors before machining. • Modify existing programs to improve performance or accommodate design changes. Machine Operation: • Set up VMC machines with proper tooling, fixtures, and workpieces. • Load CNC programs into the machine and perform dry runs to ensure correctness. • Operate machines to produce precision parts according to engineering drawings. • Monitor the machining process and make on-the-fly adjustments as needed. Quality Control: • Inspect machined parts using measuring instruments like micrometers, vernier calipers, height gauges, and CMM (if available). • Ensure all components meet dimensional and surface finish requirements. • Maintain records of inspection results and production output. Maintenance & Safety: • Perform routine machine maintenance and basic troubleshooting. • Maintain a clean and organized workstation. • Follow safety protocols and wear PPE at all times. Qualifications: • ITI / Diploma / Degree in Mechanical Engineering or related field. • 3–7 years of experience in VMC operation and CNC programming. • Proficiency in CAD/CAM software (e.g., Mastercam, Fusion 360, SolidWorks + CAM plugins). • Strong knowledge of G-code, M-code, and CNC controllers (Fanuc, Siemens, Mitsubishi, etc.). • Ability to read and interpret engineering drawings, GD&T symbols, and process sheets.

As a Lab Engineer / Technician, you will be required to have knowledge of Measuring Instruments, including their application and usage. Any experience ranging from 1-2 years will be considered an added advantage. Key Responsibilities: - Utilize your knowledge of Measuring Instruments to effectively carry out tasks in the lab As a Lab Manager / Technical Manager / Quality Manager, you must possess knowledge of ISO:17025-2017. Your role will involve overseeing and controlling overall lab activities, which includes Sales & Marketing. A minimum of 2-5 years of experience in Calibration or Quality Control is necessary. Key Responsibilities: - Ensure compliance with ISO:17025-2017 standards - Manage and supervise lab activities, including Sales & Marketing Marketing Engineers are expected to travel to customer locations in and around Indore. The company will provide a bike/scooter for transportation. Having sufficient knowledge of measuring instruments will be beneficial for this role. Electrical / Electronic Engineers should have expertise in Electro-Technical calibration activities. Service Engineers will be required to travel extensively, with approximately 10-15 days of touring per month. Proficiency in Mechanical Drawings and Geometry is essential. Knowledge of CMM will be advantageous. Key Responsibilities: - Engage in Electro-Technical calibration activities - Travel for field service and maintenance tasks Additional Details: The company offers benefits such as commuter assistance, leave encashment, and Provident Fund. The job types available are Full-time and Permanent. Please note that the expected start date for this position is 05/09/2025.,

Employee Name : Job Details Job TitleGDC EngineerDepartmentQualityReporting toSection Head Quality ManagerJobs Reporting IntoOperator / InspectorsLocation/PlantJakkasandraNo. of Reportees (Direct & Indirect)- Job Objective Responsible to lead the team of Supervisors and Operators, providing them with technical guidance to ensure adherence to quality parameters on regular basis with focus on quality produced and rejections. The position is also responsible to focus on continuous improvement activities for the section like 5S, Kaizen etc on a regular basis Primary ResponsibilitiesFinancial Support the production team to minimize the cost due to rejection and rework Ensure adherence to department budget Customer ¢ Prepare timely and accurate counter measures to address customer issues related to respective section ¢ Provide support to the production and dispatch team by ensuring timely conduct of Patrol Inspection Process ¢ Monitor the in-process quality in respective section by conducting periodic product audits ¢ Conduct patrol inspection as per schedule & review check sheets filled by inspectors ¢ Prepare dimensional report / PQCS/ critical parameters etc. periodically ¢ Check quality of the components- inline and off line and ensure that all components that move to next process are as per the required dimensional parameters ¢ Supervise tool & die changeovers, and prepare loading/unloading report ¢ Ensure that all output classified as Rework is sent back to the production team immediately ¢ Coordinate with concerned departments for timely closure of CAPA points ¢ Follow up for implementation of quality related improvement projects at the plant including customer projects as well as internal improvement initiatives ¢ Ensure that all quality related compliances and standards for the plant are met Learning & Development ¢ Ensure timely completion of all stages of Performance Appraisal Process ¢ Take responsibility for people development initiatives and building in-house capabilities for the employees in the department Key Result Areas (KRAs) & Key Performance Indicators (KPIs)CategoryKRAKPIFinancial Cost Optimization% Adherence to BudgetCost Savings owing to quality related improvement projects% reduction in cost owing to rejections and rework Process Business Excellence% reduction in product rejections by customerRatio of rejection at PDI owing to in-process inspection% adherence to the timelines of implementation of improvement projectsNumber of issues regarding gauge alignmentAudits & Compliances% deviation from agreed quality standards% adherence to timelines of MIS Customer Customer SatisfactionTarget vs. Actual customer rating% adherence to TAT for resolving customer issues Learning & Development Performance ManagementAdherence to timelines of PMS processTraining & DevelopmentTarget vs. Actual man days of training programs attendedTarget vs. Actual hrs of OJT training programs delivered% of inspectors covered during OJT Job Descriptions for ARETE22 (P) LTD | Note : Please note that these are the primary roles and responsibilities of the job above . However there maybe changes or addition to the same from time to time at the discretion of the management.

About The Role We are seeking a skilled and detail-oriented Technical Author IPC to join our Aerospace Technical Publications team. The successful candidate will be responsible for the creation, modification, and revision of Illustrated Parts Catalogs (IPC) for Airbus aircraft programs, ensuring compliance with Airbus standards and documentation processes. This role involves close collaboration with engineering, configuration, and illustration teams to deliver accurate and high-quality IPC content. Key Responsibilities Create, modify, and revise IPC content for Airbus programsSA, LR, MB, and XWB (A319, A320, A321, A330, A340, A350, A380). Analyze and interpret engineering drawings, BOMs, and change requests to update IPC content. Ensure compliance with Airbus documentation standards and processes. Perform impact analysis to assess and implement changes accurately. Guide and mentor junior authors and illustrators. Conduct reviews of completed work orders and provide constructive feedback. Perform root cause analysis for rejections and implement preventive actions. Develop and deliver content for internal knowledge sharing and training sessions. Primary Skills Strong experience in IPC authoring for Airbus aircraft programs. Proficiency in interpreting engineering drawings, parts lists, and exploded views. Hands-on expertise with Airbus tools and platforms: GIPSY GIDOCA SAP ZAMIZ DACAS PDMLink Familiarity with ATA chapters related to parts and assemblies. Secondary Skills Knowledge of documentation standards: ATA iSpec2200 S1000D ASD-STE100 Strong attention to detail and quality assurance. Ability to work independently and meet deadlines. Effective communication and collaboration skills. Experience in mentoring and training team members. Preferred Qualifications B.E/B.Tech in Aeronautical Engineering, AME, or Diploma in Aeronautics with relevant technical publication experience. 28 years of experience in IPC authoring within the aerospace domain. Certification in S1000D or ASD-STE100 is a plus. Experience working with Airbus documentation tools and standards. Knowledge of aircraft parts, assemblies, and maintenan

Job Description Assists customers to identify their technical specifications and determine what application development and documentation is required to incorporate the organization's products into customer applications | Prepares engineering drawings, system and process specifications and schedules, and contract modifications to ensure that customers' technical requirements are met | Develops application notes that clearly describe how the organization's products should be used in the customers' target application | Develops test applications used for testing solutions, including customer-specific aspects. PROFESSIONAL CAREER BAND: Work is primarily achieved by an individual or through project teams, with emphasis on technical/discipline knowledge rather than managing people. Requires the application of expertise in professional area(s) to achieve results. May have limited direct reports, but spends the majority of their time on their personal contributions to work. Progression within the Career Band reflects increasing depth of professional knowledge, project management and ability to influence others. Entry-level jobs within the Professional Career Band typically require a university degree or equivalent work experience that provides knowledge of and exposure to fundamental theories, principles and practices. PROFESSIONAL LEVEL D: Working knowledge and experience in own discipline. Continues to build knowledge of the organization, processes and customers. Performs a range of mainly straightforward professional assignments. Uses prescribed guidelines or policies to analyze and resolve problems. Receives a moderate level of guidance and direction. PROFESSIONAL SUB-LEVEL D2: Working knowledge of relevant concepts and procedures; performs a variety of routine professional tasks or assignments. Typically follows prescribed guidelines or procedures to resolve problems. May train new team members and provide input to employee performance evaluations. Works with a moderate level of guidance. When you join Renishaw, we’re committing to your future career. That’s because we believe in developing our people’s skills and prompting them internally. We also offer a benefits package that’s highly desirable; including discretionary annual bonus, 25 days leaves plus 10 company paid holidays (National & Festival holidays), Insurance coverage, education support etc. At Renishaw we believe that our success is powered by welcoming a workforce of diverse and talented people. Through encouraging an inclusive culture, where all our employees are free to be themselves, we can achieve our core values: Innovation, Inspiration, Integrity and Involvement. If you are passionate about this role and meet most of the requirements, we encourage you to apply. You might be the right fit for this position or another opportunity at Renishaw. We are committed to providing reasonable adjustments to make interviews and jobs more accessible. Should you have any difficulty during the recruitment process, or require any reasonable adjustments please contact the recruitment team on 020-6674670 or Recruitment.India@Renishaw.com Employment Type Permanent Time Type: Full time Requisition Number: R7793 CMM Applications Engineer (Open)

ROLES & RESPONSIBLITIES: 1) Responsible for regular parts stage inspection 2) Responsible for conducting the layout inspection for NPD parts in CMM as per plan 3) Responsible for measuring the tools, inserts & electrodes in CMM 4) Responsible for recording of inspection results in the inspection reports. 5) Responsible for All Plastic & Die casting regular components fully Inspection in CMM. 6) Communicating of any deviation to CMM incharge 7) Responsible for maintaining the documents and records related to their area. 8) Responsible for measuring the gauges in CMM 9) Maintain with Development of 5s Activities Tool Validation Cell Area 10) Responsible for measuring the NPD/Regular parts and Inserts in VMS Preferred Industry: REQUIRED SKILL: CMM Programming, Drawing, Model review, GD&T knowledge, Customer Interaction and Joint Inspection, Plastic Injection parts knowledge & Tool steel inspection knowledge Required Experience, Skills And Qualifications: REQUIRED KNOWLEDGE: 1) CMM 2) Measuring the tools, inserts & electrodes in CMM

Job Description :- 1. CMM programming- Kotem, Calypso, Metrolog X4 2. CMM Operating- Contura G2(Zeiss), Romer Arm(Hexagon) 3. Roughness Tester Operating-SmartTouch50(Zeiss) 4. Shopfloor instrument operating- Height Gauge, vernier caliper, bevel protector, micrometer, etc. 5. 3D scanning for reverce engg in Geomagic design x 6. 3D printing operating & maintenance- Stratasys, Ultimaker 2, Ultimaker 5S, Markforged 2 Qualification :- Diploma / Degree- Mechanical Interested candidates can share their profiles on rupendra.singh@sodexo.com

Employee Name : Job Details Job TitleGDC EngineerDepartmentQualityReporting toSection Head Quality ManagerJobs Reporting IntoOperator / InspectorsLocation/PlantJakkasandraNo. of Reportees (Direct & Indirect)- Job Objective Responsible to lead the team of Supervisors and Operators, providing them with technical guidance to ensure adherence to quality parameters on regular basis with focus on quality produced and rejections. The position is also responsible to focus on continuous improvement activities for the section like 5S, Kaizen etc on a regular basis Primary ResponsibilitiesFinancial Support the production team to minimize the cost due to rejection and rework Ensure adherence to department budget Customer ¢ Prepare timely and accurate counter measures to address customer issues related to respective section ¢ Provide support to the production and dispatch team by ensuring timely conduct of Patrol Inspection Process ¢ Monitor the in-process quality in respective section by conducting periodic product audits ¢ Conduct patrol inspection as per schedule & review check sheets filled by inspectors ¢ Prepare dimensional report / PQCS/ critical parameters etc. periodically ¢ Check quality of the components- inline and off line and ensure that all components that move to next process are as per the required dimensional parameters ¢ Supervise tool & die changeovers, and prepare loading/unloading report ¢ Ensure that all output classified as Rework is sent back to the production team immediately ¢ Coordinate with concerned departments for timely closure of CAPA points ¢ Follow up for implementation of quality related improvement projects at the plant including customer projects as well as internal improvement initiatives ¢ Ensure that all quality related compliances and standards for the plant are met Learning & Development ¢ Ensure timely completion of all stages of Performance Appraisal Process ¢ Take responsibility for people development initiatives and building in-house capabilities for the employees in the department Key Result Areas (KRAs) & Key Performance Indicators (KPIs)CategoryKRAKPIFinancial Cost Optimization% Adherence to BudgetCost Savings owing to quality related improvement projects% reduction in cost owing to rejections and rework Process Business Excellence% reduction in product rejections by customerRatio of rejection at PDI owing to in-process inspection% adherence to the timelines of implementation of improvement projectsNumber of issues regarding gauge alignmentAudits & Compliances% deviation from agreed quality standards% adherence to timelines of MIS Customer Customer SatisfactionTarget vs. Actual customer rating% adherence to TAT for resolving customer issues Learning & Development Performance ManagementAdherence to timelines of PMS processTraining & DevelopmentTarget vs. Actual man days of training programs attendedTarget vs. Actual hrs of OJT training programs delivered% of inspectors covered during OJT Job Descriptions for ARETE22 (P) LTD | Note : Please note that these are the primary roles and responsibilities of the job above . However there maybe changes or addition to the same from time to time at the discretion of the management.

The ideal candidate for this role should possess knowledge of Control Plan, PFMEA, and APQP. You will be responsible for conducting in-process rejection analysis using tools like CMM or Gear tester. Additionally, you will be involved in preparing data for Glass wall & Jomm meetings and monitoring internal deviations status and actions. As part of your responsibilities, you will be required to perform process and product audits as per the plan, verify processes with control plans, and conduct process audits. You will also need to carry out Kaktora & Pokayoke verification, analyze in-process rejections, and develop action plans accordingly. Moreover, you will be responsible for preparing data for Asaichi meetings, Glass wall & Jomm meetings, investigating chronic issues, and implementing appropriate countermeasures. You will also be involved in creating inspection procedures and maintaining sorting records. Overall, this role requires a detail-oriented individual with strong analytical skills and the ability to effectively manage various tasks related to process control and quality assurance.,

Thank you for considering job opportunities with Zeta Softech. At Zeta Softech, we pride ourselves on our expertise in diverse verticals, extensive service capabilities, and sound training practices. We offer a workplace that provides more variety, more opportunities, and more support for your career growth. Our company values the growth of our employees as they are integral to our success. Whether you are joining us in core operations, support staff, or management roles, you will be expected to maintain a strong focus on delivering the highest quality solutions for our customers. At Zeta Softech, we provide special benefits to our employees, including industry-competitive compensation plans, employee profit-sharing options, and opportunities for partnerships. We also prioritize the training and continual enhancement of skills for all our team members. If you are seeking a challenging, dynamic, and professional workplace where you will be respected, treated equitably, and remunerated based on merit and performance, Zeta Softech is the place for you. We encourage initiative, prioritize your career and professional development, and provide a learning environment regardless of your level of experience. To apply for opportunities at Zeta Softech, you can submit your CV to info@zetasoftech.com. Your CV will be carefully reviewed and matched with the most suitable positions based on your education, experience, and exposure. All positions at Zeta Softech require an appropriate technical qualification from a renowned institution, along with 3 to 8 years of relevant experience and subject knowledge. Familiarity with ISO, CMM, or equivalent processes would be desirable. Excellent communication skills, both verbal and written, strong interpersonal skills, potential leadership qualities, a good attitude, and the ability to work well in a team are also essential attributes we look for in our candidates. We are particularly interested in applications from LLB graduates with experience in drafting headnotes to judgments. Candidates should have a strong understanding of the law, proficient written English language skills, good reading comprehension, and the ability to write coherent and well-formed text. This specific requirement is for our Nagpur office, and preference will be given to Law graduates from Nagpur. Candidates from outstations must be willing to relocate to Nagpur to be considered for this position.,

Role & responsibilities Job Responsibilities : - Handling of all Measuring Instruments (Profile Projector,UTM,Height Gauge,Hardness Gauge...etc) - Calibration of Instruments - Maintain Dimensions Reports/Layout Report & Lab Reports - MSA & SPC Study Preferred candidate profile We are looking for candidates with a minimum of 2-3 years of experience.

• Knowledge of Metrology products (HG, VMM, CMM, Scanner) • Strong communication, interpersonal, customer service, and sales skills. • Generation of new sales orders • Follow-up on customer payments

1. To do the daily calibration of CMM with Master Sphere. 2. Daily cleaning of CMM working table with oil and Stylus with standard Cotton Cloth. Cleaning of rest of the areas of Machine with normal cotton cloth. 3. To perform measurement, Inspection & Testing of production parts using previously prepared inspection program. 4. Inspection of New Receiving gauges & jigs & fixtures as per Drawing. 5. To ensure the required working environment for CMM i.e. Temperature and Humidity to be mentioned. 6. To ensure the external Calibration of CMM as per Plan and from NABL approved Lab / Manufacturer

Job Description Experience in machinery such as CNC milling, HSM, EDM, Wire cut, Grinding, CMM, and Laser welding machines to manufacture mold tool components, in accordance with Work Instructions and Process Quality Instructions. Experience in preventative maintenance, repair of injection molds and associated dies and fixtures, tool assembly and fitting process. Tool management system knowledge - tooling spare part quality improvement and stock optimization. Mechanical Design & development of new mold tools for new products/projects. Design review with tool suppliers to ensure lesson learnt & design standards are implemented. New tool tryouts & trouble shooting. Good knowledge of Tool design software (MFA, Catia, ProE) Tool room experience to make dies, punches as well as fixtures is desired. knowledge of interpretation of tool and engineering drawings, GD&T, sketches, templates, manuals, etc. Skilled in Mold tool supplier development, coordination & negotiations. Basic knowledge on quality management system, process audits, special process (IATF-16949, VDA6.3 & CQI 23) Basic know-how on APQP, PPAP Hands on experience on SPC Qualifications Bachelors in Engineering (Mechanical, Polymer, tool design and manufacturing) Min. 6 years of experience in purchasing quality/ quality management system. (3 years of experience in tool design & development (desired)) Additional Information Competency requirements : 1. Tooling and Manufacturing - Plastic Molds 2. Design of Experiments 3. Quality management System (IATF16949, CQI, VDA) 4. Presentation skills 5. Negotiation skills 6. Understanding of basic tool costing

Location- Bommasandra/Jigani. Prefer Aerospace industry, PFD, PDCA/8D methodology, PPAP Level 3, GRR study , SPC, APQP core tools like PFD , FMEA & Control Plan.GD&T. Drawing Specifications , plating, machining, VMM,CMM, Required Candidate profile Location- Bommasandra/Jigani. Prefer Aerospace industry, PFD,PDCA/8D methodology, PPAP Level 3, SPC, APQP core tools like PFD , FMEA Control Plan. GD&T. Machining,

Job Description: You will be responsible for inspecting CNC/VMC machined parts using precision measuring instruments such as micrometers, vernier calipers, height gauges, and CMM. Your role will involve performing both in-process and final inspections to ensure that the parts meet dimensional and surface finish specifications. It will be essential for you to interpret engineering drawings and technical documents to determine inspection criteria accurately. Additionally, you will collaborate closely with production and engineering teams to resolve any quality issues that may arise during the manufacturing process. Key Skills & Qualifications: - ITI/Diploma in Mechanical Engineering or a relevant field. - Minimum of 1 year of experience in quality inspection. - Freshers are also encouraged to apply. Please note that male candidates are preferred for this position. Candidates from Palghar to Borivali are preferred, and applications from other locations will not be considered at this time. This is a full-time, permanent position suitable for fresher candidates. Benefits: - Health insurance - Yearly bonus Schedule: - Day shift Work Location: - In-person (Note: This job description does not include headers and is formulated in standard format.),

As a full-time employee at FIS, you will join a dynamic team that is at the forefront of the fintech industry. With a Bachelor's degree in Commerce or Business, you will have the opportunity to be part of a diverse and inclusive work environment that celebrates collaboration and innovation. With a focus on providing top-notch customer service, you will play a crucial role in coordinating product events and shareholder communications in the Asia EMEA region. Your responsibilities will include working closely with various departments and teams, collaborating with customers and vendors, and enhancing reporting and data management. You will provide in-depth product support to FIS clients, resolving inquiries and concerns through various communication channels such as telephone, email, or chat sessions. Your excellent communication skills, both written and verbal, will be essential in effectively conveying complex concepts to a diverse audience. To excel in this role, you must possess strong analytical, decision-making, and problem-solving skills. Proficiency in Excel and data analytics is required, along with the ability to work in a Windows-based environment. Knowledge of the financial services industry, basic financial analysis principles, and industry-standard process methodologies would be advantageous. Additionally, your willingness to share knowledge and expertise with other team members is highly valued. At FIS, we offer a rewarding career that goes beyond just a job. You will have the opportunity to shape the future of fintech, engage in continuous learning and development, work in a collaborative environment, and give back to the community. In addition to a competitive salary and benefits package, you will have a voice in the future of fintech and the opportunity to make a meaningful impact in the industry. FIS is committed to protecting the privacy and security of personal information and operates on a direct sourcing model for recruitment. We do not accept resumes from recruitment agencies that are not on our preferred supplier list. Join us at FIS and be part of a team that is driving innovation and excellence in the fintech industry.,

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity s Product Engineering Teams optimize existing products from information or input provided by marketing, customers, Operation Teams, Development Engineers or other employees. They maintain existing products, processes, and specifications including modifications for new applications consistent with manufacturing techniques and economies. They also initiate and implement programs to continuously improve quality, and cost, while meeting customer requirements and may support and implement product extensions to existing platform products to meet specific customer requirements. They are the key experts in the products they are responsible for at TE. Responsibilities Understand stakeholder request and establish scope of work Evaluate form, fit, function and application of the products under study Dis-assemble products systematically for comparative study with competitor products Prepare sample for functional test and material characterization Perform dimensional study using metrology tools 2D CMM & generate models using 3D Scanners Prepare samples for metallurgical evaluation and characterization using high end equipment such as scanning electron microscope, spectrometers etc. Conduct basic functional tests for mechanical and electrical parameter measurement Assess products for functional value and associated cost using Value Engineering methodologies Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities. Develop comprehensive report on product analysis and generate cost out ideas Execute & drive VAVE projects starting from Idea generation to Implementation Co-ordinate with Global & local stake holders for project execution Provide Technical support , root cause failure analysis and problem-solving assistance on manufacturing or quality issues related to VAVE projects Skill Set and Profile Experience in electrical & mechanical design consideration for Mechanical and electromechanical product development in industrial / aerospace / automotive / medical / energy domain Experience in understanding top level functional requirements of a product and designing the components/subsystems to meet Product Performance criteria. Hands on experience for tearing apart assemblies / sub-assemblies of electromechanical parts Experience in manufacturing operations such as stamping, molding, machining & coating Experience in metal & polymer characterization for material type, grade & secondary operations Experience in should costing of components related to multiple commodities like, plastic, sheet metal, machining, extrusion etc. Knowledge on VAVE methodology & project life cycle Capable of Handling Multiple Projects simultaneously. Good Conceptual, problem solving and Analytical Skills. Should be Self-Motivated, Adaptive, Passionate about results and a Good Team Player Strong Interpersonal & stake holder management skill Strong Technical Aptitude with Willingness to explore & learn new Technologies. Demonstrated Experience of working in a fast paced and changing environment with tight deadlines Knowledge of aPriori tools will be an added advantage. Qualification and Experience B.E./B.Tech. in Metallurgy / Mechanical Engineering 8+ years of experience in engineering field for reverse engineering, competitor product benchmarking, should costing & Value Engineering Competencies ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at www.te.com and on LinkedIn , Facebook , WeChat, Instagram and X (formerly Twitter). WHAT TE CONNECTIVITY OFFERS: We are pleased to offer you an exciting total package that can also be flexibly adapted to changing life situations - the well-being of our employees is our top priority! Competitive Salary Package Performance-Based Bonus Plans Health and Wellness Incentives Employee Stock Purchase Program Community Outreach Programs / Charity Events Across our global sites and business units, we put together packages of benefits that are either supported by TE itself or provided by external service providers. In principle, the benefits offered can vary from site to site. Location

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivitys Product Engineering Teams optimize existing products from information or input provided by marketing, customers, Operation Teams, Development Engineers or other employees. They maintain existing products, processes, and specifications including modifications for new applications consistent with manufacturing techniques and economies. They also initiate and implement programs to continuously improve quality, and cost, while meeting customer requirements and may support and implement product extensions to existing platform products to meet specific customer requirements. They are the key experts in the products they are responsible for at TE. Responsibilities Understand stakeholder request and establish scope of work Evaluate form, fit, function and application of the products under study Dis-assemble products systematically for comparative study with competitor products Prepare sample for functional test and material characterization Perform dimensional study using metrology tools 2D CMM & generate models using 3D Scanners Prepare samples for metallurgical evaluation and characterization using high end equipment such as scanning electron microscope, spectrometers etc. Conduct basic functional tests for mechanical and electrical parameter measurement Assess products for functional value and associated cost using Value Engineering methodologies Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities. Develop comprehensive report on product analysis and generate cost out ideas Execute & drive VAVE projects starting from Idea generation to Implementation Co-ordinate with Global & local stake holders for project execution Provide Technical support , root cause failure analysis and problem-solving assistance on manufacturing or quality issues related to VAVE projects Skill Set and Profile Experience in electrical & mechanical design consideration for Mechanical and electromechanical product development in industrial / aerospace / automotive / medical / energy domain Experience in understanding top level functional requirements of a product and designing the components/subsystems to meet Product Performance criteria. Hands on experience for tearing apart assemblies / sub-assemblies of electromechanical parts Experience in manufacturing operations such as stamping, molding, machining & coating Experience in metal & polymer characterization for material type, grade & secondary operations Experience in should costing of components related to multiple commodities like, plastic, sheet metal, machining, extrusion etc. Knowledge on VAVE methodology & project life cycle Capable of Handling Multiple Projects simultaneously. Good Conceptual, problem solving and Analytical Skills. Should be Self-Motivated, Adaptive, Passionate about results and a Good Team Player Strong Interpersonal & stake holder management skill Strong Technical Aptitude with Willingness to explore & learn new Technologies. Demonstrated Experience of working in a fast paced and changing environment with tight deadlines Knowledge of aPriori tools will be an added advantage. Qualification and Experience B.E./B.Tech. in Metallurgy / Mechanical Engineering 8+ years of experience in engineering field for reverse engineering, competitor product benchmarking, should costing & Value Engineering Competencies ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more atwww.te.com and onLinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). WHAT TE CONNECTIVITY OFFERS: We are pleased to offer you an exciting total package that can also be flexibly adapted to changing life situations - the well-being of our employees is our top priority! Competitive Salary Package Performance-Based Bonus Plans Health and Wellness Incentives Employee Stock Purchase Program Community Outreach Programs / Charity Events Across our global sites and business units, we put together packages of benefits that are either supported by TE itself or provided by external service providers. In principle, the benefits offered can vary from site to site.

You are expected to maintain a good rapport with customers, provide after sales assistance, inform them about new technological advancements, and create new sales opportunities by providing technical expertise in the field of Dimensional Metrology