24 Work Measurement Jobs

The SITE ENGINEER should settle the final bill measurement immediately as per bid after completion of Project after complete rectification of notified defects by developer Shall be responsible to verify day to day consumption of cement in the work and shall see that the cement used in work is as per the theoretical requirement Shall preserve field books and measurement books by completion of project or as advised by Employer/Engineer-in-charge /Architect / Consultant Supervision of construction activities, preparation & certification of bills Shall scrutinize bills of agencies after recording measurements in MB s and recommend payment to agencies by preparing final bills, as per direction of Engineer-in Charge/Employer/Architect / Consultant Keep a check on the operating staff so as to ensure that all the systems are operated to the satisfactory level Supervision/ monitor works for conformity with quality, good workmanship, line, levels etc and provide total supervision of works Co-ordinate with agencies to ensure all the works progress in a systematic, synchronized and time bound manner Conduct daily site meeting to sort-out the bottlenecks holding the progress Interact daily with respective UDA/ULBs/ implementing agencies/ contractors on all matters related to execution (ie, site condition, progress of various components with respect to timeline, highlight the issues, planning of the execution, status of pending approvals NoCs, requirement of fund, extra/ excess/ savings of the components, etc ) including submission of monthly/ quarterly progress report, cost status etc Verify contractor s site measurements, bills and issue appropriate payment certificate and recording MB (Measurement Book), if required and maintenance of all records/ documents Verification & Certification of Measurement Sheet, Certification of Invoices raised by Contractor Monitor and inspect the contractor s methods of construction for permanent and temporary works, including false work, checking of centering & scaffolding, reinforcement and supervision of concrete & other civil work, as well as materials and equipment installation, workmanship and other site operations in regard of compliance with the requirements of the specification, the applicable standards and the manufacturer s recommendations, with all due attention being given to adherence to safety codes, labor laws, either laws, bye-laws and regulations and avoidance of public nuisance Record the work measurement and certify the contractor s bill The Field Engineer shall record all the measurement of work However, 100% measurement of hidden items shall be verified by the Site/ Municipal Engineer In addition, Consultant shall also assist the employer in verification of measurement by the engineer of the ULB/ State

We are looking for a Factory Manager cum Industrial Engineer for our garment Industry in Tumkur. As the Factory Manager, you will be responsible for various aspects of factory management. Your key responsibilities will include Production Planning and Scheduling, Resource Allocation, Quality Control, Cost Management, Safety and Compliance, Inventory Management, Collaboration and Communication, and Problem Solving. In terms of Factory Management, you will need to develop and manage production schedules to ensure timely delivery and adherence to deadlines. You will also be tasked with optimizing the use of resources like labor, machinery, and materials to maximize efficiency. Implementing and maintaining quality control measures to ensure products meet specified standards will be crucial. Tracking production costs, identifying areas for cost reduction without compromising quality, and ensuring a safe working environment and compliance with relevant regulations are also part of the role. Managing inventory levels of raw materials and finished goods to minimize waste and ensure timely availability is essential. Collaborating with various departments, including design, merchandising, and sales, to coordinate production activities and identifying and resolving production issues will be key responsibilities. As an Industrial Engineer, you will focus on work measurement and analysis, process optimization, layout and flow analysis, automation and technology implementation, capacity planning, cost reduction, data analysis, and training and development. Conducting time studies, analyzing work processes, and implementing industrial engineering techniques to optimize production processes will be crucial. Evaluating and optimizing factory layouts and production flow to improve efficiency will also be part of your responsibilities. Researching and implementing new technologies and automation to enhance productivity and reduce costs will be important. Analyzing factory capacity, making recommendations for optimizing capacity utilization, identifying and implementing strategies to reduce production costs, and using data to track performance and make informed decisions will be key aspects of the role. Additionally, developing and delivering training programs for factory personnel to improve skills and knowledge will be essential. This is a full-time position with benefits including health insurance and Provident Fund. The work schedule is during the day shift, and the work location is in person. The application deadline is 25/06/2025, and the expected start date is also 25/06/2025.,

Develop and implement time and motion studies, line balancing, and productivity improvement plans. Design plant layouts Industrial Automation, PFD,PFMEA, CP & Work Instructions. Experience in Assembly line set, Line balancing, SMED Layout Required Candidate profile to improve productivity, reduce costs, and ensure quality applying industrial engineering principles Problem solving( Lean & six sigma) New Machine, Jig , fixture design & development

JOB SUMMARY Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES Monitor and continuously improve daily quality/efficiency performance for assigned areas. Design and procure production tooling, processing equipment and workstations. Coordinate layout and workstation move activities. Prepares time estimates for proposed projects and evaluates time factors. Minimize change over time by ensuring programs use common set-ups where possible. Verify that machine maintenance is being performed on schedule. Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations. Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations. Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. May perform other duties and responsibilities as assigned. JOB QUALIFICATIONS KNOWLEDGE REQUIREMENTS Key Requirements: o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.) o Understanding of Jabils global strategies and direction o Understanding of sites facilities, capabilities and how they tie back to the Jabil strategies and direction o Strong analytical ability o Able to implement continuous improvements and cost reduction programs o Good communication skills Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

Role & responsibilities Arriving Manpower Planning on monthly basis based on production plan. Maintaining direct / Indirect labor at any point of time to the required international standard and to the required skill. Developing work force internally through proper training with HR. Increase Productivity by doing Industrial engineering Methods such as Time and Work study. Identifying Bottleneck operations in advance and educate Supervisors and preparation of Pilot Study. Generating Efficiency Reports of the Factory & presenting to management on Daily Basis Monitoring the manpower, machine utilization in shop floor. Arrive at smo and calculate cutting and packing efficiency regularly. To Provide thread consumption ,elastic, drawcord etc...for Costing to Marketing & purchase. In Conducting with planning work on pre-production meeting . Analyze work methods and determine the Best Possible Method for Each Operations thru GSD/MTM/ Observation method. Work on regular skill upgradation of the operators. Develop folders, attachments for Upcoming orders along with Maintenance department. Testing & using new kind of folders & other attachments to simplify the operations. Allocating the manpower as per the style & requirement on work place on daily basis. Performing Time & Motion Study to arrive capacity of operators and line capacity. Making standard operating procedure for all operations. Train the people on all aspects of IE. Preferred candidate profile Perks and benefits

JD for the position of Manager: Industrial Engineering/PPC & Productivity Improvement: Metro Tyres Ltd. A Competent and result oriented professional with extensive experience of 10 to 15 years in Industrial engineering, PPC/Productivity improvement function in the Tyre Industry. All factors being equal, a couple of years experience in Two-Three-Wheeler Tyres Manufacturing company shall be an advantage Core team member for manpower & Improvement activities like kaizen. Excellence in Process Lean manufacturing concepts - VSM, 5S , throughput, SMED , Industrial Engineering concepts - Time study, Method study, Ergonomics. Time & Motion study. An effective communicator with strong leadership, people management, coordination, relationship management, analytical and problem-solving skills. Qualifications: B.Tech/BE in Industrial Engineering/Production Engineering/Equivalent degree A Brief on the Company: Metro Tyre Ltd. prestigious unit of the Metro Tyre group; The Plant has a capacity to produce 20000 Nos. Continental Cycle tyres , 15000 Nos. 2/3 Wheeler tyres and 40000 Nos. domestic Cycle tyres per Month, and also having in house Tube and Flap production facility. A Specific Synopsis of JD: Heading the Industrial Engineering Dept. for Metro group of Companies. Calculation & updating of machine capacity and set Targets. Responsible for Productivity and Efficiency improvement (OEE optimization). Responsible for the Capacity Calculations & Analysis and Layout Preparations. Setup time reduction thru SMED Responsible for Material Handling Equipment Calculations and Requirement. Value Stream Mapping analysis for current & future states. IATF 16949 documentation & internal auditing. Responsible for the Manpower Calculations, Requirement and Sanctioning. Responsible for Automations for the Expansion and the New Plant Development. Identification of Non Value Adding activities and reduction Manpower Calculations (Direct & Indirect) Indirect manpower optimization by Work sampling & Organizations methods Feasibility study & Implementation of Low Cost Automation. Training to workman and executives. Implementation of 5S and Kaizen activities throughout the group of organisation. Improvement in Manpower productivity through automation and manpower optimization. Salary & Emoluments : Attractive salary shall be given to the selected candidate. Location : Ludhiana(Punjab) Apply to : rstanwar1711@gmail.com Role & responsibilities Preferred candidate profile

As attached Key Responsibilities: Experience and Expertise in Mfg Engg/ Work Measurement /Productivity / Capex planning and execution/ Capacity Enhancement/ Cost optimization/ Lean Initiatives/ Low Cost Automation/ Digitation Initiatives Short Info Posted: 0 day(s) ago Location: Himachal Pradesh Qualifications: BE - Mechanical/ Industrial/ Production Engineering Experience: 15 Years - 0 Months To 20 Years - 0 Months

To support our extraordinary teams who build great products and contribute to our growth, were looking to add a Senior Engineer - Operations Engineering located in Pune. What a typical day looks like: Coordinate and support the deployment of global systems at multiple sites, ensuring smooth project management, proactive site readiness, timely issue escalation, and dependable post-launch support as needed. Collaborate effectively with operations teams and technical stakeholders to gather user inputs, develop clear business concepts, prepare detailed requirement documents, and drive deliverables through the full development lifecycle from intake to production deployment. Take ownership of creating, reviewing, and executing test cases, performing feature validation, and supporting user acceptance testing to secure successful, high-quality releases. Develop, maintain, and enforce process standards, guidelines, and policies to uphold consistency and compliance across all supported sites. Prepare clear, well-structured training materials and deliver engaging sessions to ensure site teams confidently adopt new processes, system features, and performance metrics. Maintain accurate and up-to-date project trackers, reports, and presentations to keep stakeholders informed on status, risks, and site readiness. Demonstrate strong ownership and accountability for assigned projects, ensuring effective planning, timely updates, clear progress tracking, and prompt issue resolution throughout the project lifecycle. Leverage sound knowledge of industrial engineering principles, TPM concepts for downtime, and LEAN techniques to guide discussions, shape requirements, and ensure practical, efficient solutions that fit real-world shopfloor needs. Foster a collaborative, solutions-oriented work style, contributing individually while working closely with teams across time zones as needed to support global stakeholders and ensure project goals are met. The experience we're looking to add to the team: Bachelor’s degree in a relevant field or equivalent combination of education and practical experience. Typically requires 6+ years of hands-on experience in operations, with exposure to operations management; experience in global or regional roles, including global deployments or implementations, is preferred. Strong ability to think strategically, analyze complex problems, collect and interpret data, and draw sound conclusions. Working knowledge of Industrial Engineering fundamentals such as work measurement, cycle time analysis, basic MOST/PMTS, layout design, line balancing, material flow, capacity and manpower calculations, and process improvement methods like Kaizen, Kanban, Poka-yoke, SMED, etc. Proficient in MS Office tools (Excel, PowerPoint, Word) Excellent verbal and written communication skills in English. Proven ability to work effectively in a global, cross-functional environment. What you’ll receive for the great work you provide: Health Insurance PTO

Industrial engineer- junior required at ai, sonipat for a garment industry Qualification- any graduate Exp- min 2 yrs in garments Salary-upto 50k

Responsible for productivity improvement with application of latest tools and technologies.Good in IE function with strength in work,motion and time study.TQM,TPM,VSM,Lean,Six sigma,Line balancing,cycle time improvement,Layout planning,ergonomics. Required Candidate profile BE-Mechanical / Industrial with 8-12 yrs exp in Industrial engineering function with leading automotive groups.Proven track of productivity improvement with application of latest tools & techniques.

Responsible for productivity improvement with application of latest tools and technologies.Good in IE function with strength in work,motion and time study.TQM,TPM,VSM,Lean,Six sigma,Line balancing,cycle time improvement,Layout planning,ergonomics. Required Candidate profile BE-Mechanical / Industrial with 5-8 yrs exp in Industrial engineering function with leading automotive groups.Proven track of productivity improvement with application of latest tools & techniques.

Developing customers, strategizing, understanding requirements, negotiating, managing orders, and coordinating support

Job Title: Civil Engineer Experience Required: 5-8 Years. Location: Bangalore, Patna, Patliputra Industry: Building Construction / Real Estate Employment Type: Full-Time Key Responsibilities: Execute and supervise all stages of building construction Look into excavation, foundation, RCC frame structure, brick/block work Plastering, flooring, tiling, waterproofing, and finishing works Coordinate with architects, structural consultants, MEP teams, and contractors. Review architectural and structural drawings, ensuring proper implementation at site. Ensure timely procurement and delivery of construction materials. Manage day-to-day site activities, ensuring progress as per schedule and budget. Maintain site records, prepare daily/weekly progress reports, and report deviations. Handle subcontractor billing, BOQ verification, and work measurements. Ensure implementation of safety protocols and adherence to company standards. Qualifications & Skills: B.E./B.Tech or Diploma in Civil Engineering 5-8 years of relevant experience in building construction Knowledge of materials, construction methods, and latest technologies in the field Proficient in AutoCAD, MS Office, and project scheduling tools like MS Project or Primavera Excellent problem-solving, site coordination, and communication skills

Key Deliverables: Optimize production layouts and workflows for garment manufacturing Conduct time and motion studies to improve efficiency Implement lean manufacturing practices across operations Analyze and balance production lines for maximum output Role Responsibilities: Monitor daily productivity and suggest process improvements Coordinate with production teams to resolve bottlenecks Track capacity utilization and suggest enhancements Maintain documentation for industrial engineering activities

Key Deliverables: Optimize production layouts and workflows for garment manufacturing Conduct time and motion studies to improve efficiency Implement lean manufacturing practices across operations Analyze and balance production lines for maximum output Role Responsibilities: Monitor daily productivity and suggest process improvements Coordinate with production teams to resolve bottlenecks Track capacity utilization and suggest enhancements Maintain documentation for industrial engineering activities

Key Deliverables: Optimize production layouts and workflows for garment manufacturing Conduct time and motion studies to improve efficiency Implement lean manufacturing practices across operations Analyze and balance production lines for maximum output Role Responsibilities: Monitor daily productivity and suggest process improvements Coordinate with production teams to resolve bottlenecks Track capacity utilization and suggest enhancements Maintain documentation for industrial engineering activities

Job Description: Industrial Engineer (I.E) Manager Company- FashionC Overseas Exports Position Title: I. E Manager Location: Sector-65, Noida Department: I.E Employment Type: Full-Time Pay: 90,000.00 - 1,20,000.00 per month Experience: total work: 10-15 + years (Preferred) Job Overview: We are seeking a skilled and motivated Industrial Engineer Manager to lead our industrial engineering team in a fast-paced garment manufacturing export house. The successful candidate will oversee production efficiency, workflow optimization, cost reduction, quality control, and the implementation of best practices to enhance manufacturing processes and ensure on-time delivery. This role requires a strong understanding of garment manufacturing systems, industrial engineering principles, and leadership experience. Key Responsibilities: Lead, train, and manage a team of industrial engineers to ensure effective project execution and continuous process improvement. Analyze production processes to identify inefficiencies and areas for improvement, implementing lean manufacturing techniques and best practices. Develop and implement time and motion studies, process flow analysis, and standard operating procedures to optimize labor, equipment, and material utilization. Collaborate with production and quality teams to improve productivity, reduce scrap rates, and ensure product quality. Design and optimize layouts for manufacturing facilities to maximize space utilization, minimize workflow bottlenecks, and improve overall efficiency. Work closely with the design and development teams to ensure manufacturability and cost-effective production processes for new garment styles and designs. Conduct root cause analysis for production issues, offering data-driven solutions to enhance operational performance. Monitor key performance indicators (KPIs) such as efficiency, productivity, yield, and cost to ensure targets are met. Develop and manage project timelines, ensuring timely implementation of engineering solutions and process improvements. Oversee capacity planning to align production schedules with customer demand and business requirements. Establish, monitor, and enforce safety standards and guidelines to maintain a safe working environment. Review and approve equipment procurement, installation, and maintenance schedules, ensuring proper functioning and cost-effectiveness. Prepare reports and presentations for senior management on process performance, improvement initiatives, and cost-saving opportunities. Key Requirements: Bachelors degree in Industrial Engineering, Manufacturing Engineering, or a related field. Strong knowledge of garment production processes, including fabric cutting, sewing, finishing, and quality control. Proven experience in process optimization, lean manufacturing, and cost-reduction initiatives. Excellent problem-solving skills and ability to lead teams through complex challenges. Proficient in using industrial engineering tools and software (e.g., AutoCAD, ERP systems, MS Excel, etc.). Strong analytical skills with the ability to interpret data and generate actionable insights. Solid understanding of health, safety, and environmental regulations in garment manufacturing. Excellent communication, interpersonal, and leadership skills. Ability to work effectively in a fast-paced, high-pressure environment. Preferred Skills and Qualifications: Experience with garment production and export operations. Knowledge of sustainability practices in the textile industry. Certification in lean manufacturing or Six Sigma.

We are seeking a Billing Engineer with a strong background in real estate and construction billing The candidate will be responsible for preparing subcontract bills The candidate have to maintain documentation in compliance with contract requirements Required Candidate profile Prepare client billing, sub-contractor billing, and internal project billing Verify work measurements and site reports in coordination with site engineers. Ensure all billing documents are complete

Roles and Responsibilities Lead manufacturing engineering projects, including capacity planning, process design, and line balancing. Conduct work measurement studies to optimize production processes and improve productivity. Collaborate with cross-functional teams to implement lean manufacturing principles and cycle time reduction strategies. Develop and maintain accurate capacity plans to ensure efficient use of resources. Analyze data from various sources (e.g., OEE reports) to identify areas for improvement.

Position: Industrial Engineer Location: Rai, Sonipat Qualification: Mechanical Experience: Min 5 yrs Salary: Up to 60000 Skills: Experience in textile/garment industry required

Job Purpose: To support continuous improvement initiatives by conducting work studies, enhancing operational efficiency, and driving cost optimization across fabrication and production processes. Key Responsibilities: Conduct Time Studies and Method Studies to evaluate and improve existing workflows. Identify bottlenecks in processes and implement corrective actions for their elimination. Lead initiatives to reduce waste and improve productivity across shop floor operations. Monitor and enhance Overall Equipment Effectiveness (OEE) and resource utilization . Perform in-house fabrication cost calculations to aid in accurate job costing and budgeting. Calculate Incentive as per Incentive Schemes. Collaborate closely with cross-functional teams including Production, Planning, Projects, Welding, and Maintenance to identify areas for operational improvement. Support deployment of Lean Manufacturing and Continuous Improvement (Kaizen) initiatives. Participate in data collection, analysis, and reporting for key productivity and efficiency metrics. Demonstrate a high level of learning agility , acquiring knowledge through observation and interaction on the shop floor. Desired Skills & Competencies: Comprehension of engineering drawings specifically for fabrication and machining Hands-on attitude with a keen interest in shop floor processes Knowledge of Lean tools and Industrial Engineering principles Proficiency in MS Excel, MS Word, MS Power Point, and data analysis tools Strong analytical and problem-solving skills Good communication and interpersonal skills Willingness to learn and work in a dynamic, collaborative environment

Production engineer(machine foundation) required for a Sheetmetal company Qualification- Any mechanical Exp- min 3 yrs Salary- upto 40k location- kuchch, gujrart WTsapp me resume at 8295842337- Mr. Bansal

About The Role This role involves the development and application of engineering practice and knowledge in designing, managing and improving the processes for Industrial operations, including procurement, supply chain and facilities engineering and maintenance of the facilities. Project and change management of industrial transformations are also included in this role. About The Role - Grade Specific Focus on Industrial Operations Engineering. Fully competent in own area. Acts as a key contributor in a more complex/ critical environment. Proactively acts to understand and anticipates client needs. Manages costs and profitability for a work area. Manages own agenda to meet agreed targets. Develop plans for projects in own area. Looks beyond the immediate problem to the wider implications. Acts as a facilitator, coach and moves teams forward. Skills (competencies)

We are seeking a Billing Engineer with a strong background in real estate and construction billing The candidate will be responsible for preparing subcontract bills The candidate have to maintain documentation in compliance with contract requirements Required Candidate profile Prepare client billing, sub-contractor billing, and internal project billing Verify work measurements and site reports in coordination with site engineers. Ensure all billing documents are complete