265 Wonderware Jobs

Job Title: PLC & SCADA Automation Engineer Experience Required: 2–4 Years Location: Puri Job Type: Full-time Key Responsibilities: Design, develop, and implement automation solutions using PLC, SCADA, and HMI systems. Troubleshoot and maintain PLC/SCADA/HMI systems in industrial automation projects. Work with control panels, sensors, VFDs, and other field instruments. Prepare and modify control logic, ladder diagrams, function block diagrams, and structured text programming. Configure and integrate SCADA systems for monitoring, control, and reporting. Support commissioning and installation at client sites. Ensure compliance with safety standards and operational requirements. Provide technical documentation, training, and support to clients/teams. Technical Skills Required: Hands-on experience with PLC programming (Siemens, Allen Bradley, Mitsubishi, Delta, Schneider, etc.). Expertise in SCADA software (Wonderware, WinCC, iFIX, Citect, etc.). Knowledge of HMI development and communication protocols (Modbus, Profibus, Profinet, Ethernet/IP). Basic knowledge of electrical circuits, instrumentation, and control systems . Experience in troubleshooting and commissioning industrial automation projects. Qualifications: Bachelor’s/Diploma in Electrical, Electronics, Instrumentation, or Automation Engineering . 2–4 years of hands-on experience in PLC & SCADA automation projects. Soft Skills: Good problem-solving and analytical skills. Strong communication and teamwork abilities. Ability to work independently under deadlines. Willingness to travel to client sites if required. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Work Location: In person

Electrical - SCADA Engineer Location: Noida Education: A Bachelor’s degree in Electrical Engineering Relevant certifications in SCADA systems, automation, or control systems (e.g., Siemens, Schneider, ABB, GE, Honeywell) are preferred. Experience: Minimum 8 years of experience working with SCADA systems in the Oil & Gas, Petrochemical, or industrial sectors. Strong understanding of SCADA software (e.g., Wonderware, Siemens, GE iFIX, Schneider Electric, etc.). Experience with PLCs, RTUs (Remote Terminal Units), and DCS systems. Knowledge of communication protocols like Modbus, OPC, Profibus, DNP3, and Ethernet. Familiarity with IT infrastructure (servers, networks, databases) and their role in SCADA systems. Experience with alarm management, data logging, and historical data analysis. Working knowledge of industrial control systems security best practices. Job Description: Reports to the Lead Engineer (LE) Design, implement, and maintain SCADA systems for monitoring and control of Oil & Gas operations. Prepare and review design documentation, including specifications, drawings, and operation manuals for SCADA systems. Carry out procurement activities such as MR, TBE, Vendor print review etc. for SCADA System Configure and program SCADA servers, workstations, and communication protocols. Monitor real-time data acquisition, alarm systems, and data visualization to ensure optimal performance and reliability. Oversee the installation and commissioning of SCADA systems, ensuring compliance with technical specifications and safety regulations. Troubleshoot, diagnose, and resolve SCADA-related issues in a timely manner. Collaborate with control systems engineers and operations teams to ensure seamless integration of SCADA with DCS (Distributed Control Systems), PLC (Programmable Logic Controllers), and other automation systems. Perform regular system backups, updates, and software patching. Support system upgrades and modifications as per project requirements. Ensure that SCADA systems meet safety, security, and regulatory standards, particularly within the Oil & Gas industry. Generate reports on SCADA system performance, alarms, and data trends for analysis and optimization. Perform root-cause analysis for SCADA system faults and implement corrective actions. Manage vendors and contractors for SCADA systems procurement, installation, and commissioning. Assist in the development and documentation of operating procedures and system configurations. Provide technical support and training for end-users on SCADA systems. Work with vendors and third-party contractors to support SCADA software and hardware systems. Provide training to junior engineers and technicians on the operation, maintenance, and troubleshooting of SCADA systems. Maintain records of inspections, maintenance, and system performance for reporting purposes. Work closely with the project management team to meet project schedules, budgets, and quality standards. Interact and support with other Teams/ Departments for Detail engineering activities. Participate in vendor/ subcontractor meetings Model Review in Navis Works / Working experience in AutoCAD Familiarity with ISO/Quality control procedures. Skills: Strong problem-solving, troubleshooting, and diagnostic skills. Excellent communication skills for interacting with cross-functional teams, contractors, and clients. Project management skills, with the ability to manage multiple tasks and meet deadlines. Ability to work independently and in a team environment. Familiar with MS Office Word/Excel/PowerPoint, and similar computer program Good Interpersonal skills, Communication skills in English Other Desirable Requirements Knowledge of SCADA system integration with enterprise software like ERP and asset management systems. Understanding of the specific challenges and technologies in the Oil & Gas industry, such as remote monitoring of offshore platforms or pipelines. Willing for overseas office / site deputation

Job Title: Design Engineer – Automation Location: Ahmedabad Positions: 1 Experience: 15–18 Years Qualification: BE – Instrumentation / Electronics & Telecommunication Salary: ₹15–20 LPA Key Role: Lead the design, integration & implementation of automation systems for high-speed packaging machinery. Responsibilities: Lead concept-to-deployment automation control design. PLC, HMI & SCADA programming (Siemens, Allen-Bradley, Schneider). Servo drives, motion control, VFD system integration. Hardware selection & control panel design (EPLAN/AutoCAD Electrical). Compliance with ISO, CE & safety standards. FAT & SAT execution, troubleshooting & optimization. Skills Required: PLC programming: Siemens S7, Allen-Bradley, Omron, Mitsubishi. HMI/SCADA: WinCC, Wonderware, FactoryTalk. Industrial communication: Profinet, Profibus, Modbus, EtherNet/IP. Servo systems, motion control, robotics integration. Strong leadership & project management skills. Fluent English communication. Benefits: Performance-linked incentives. Global project exposure. Training & career development. With Regards, Himani(HR) 9377165778 Job Types: Full-time, Permanent Pay: ₹1,000,000.00 - ₹2,000,000.00 per year Work Location: In person

Position Title Senior Engineer, CIS Function/Group Supply Chain Location Mumbai (Powai) Shift Timing 1.30 pm – 10.30 pm Role Reports to Sr. Manger, Engineering Solutions Remote/Hybrid/in-Office Hybrid About General Mills We make food the world loves: 100 brands. In 100 countries. Across six continents. With iconic brands like Cheerios, Pillsbury, Betty Crocker, Nature Valley, and Häagen-Dazs, we’ve been serving up food the world loves for 155 years (and counting). Each of our brands has a unique story to tell. How we make our food is as important as the food we make. Our values are baked into our legacy and continue to accelerate us into the future as an innovative force for good. General Mills was founded in 1866 when Cadwallader Washburn boldly bought the largest flour mill west of the Mississippi. That pioneering spirit lives on today through our leadership team who upholds a vision of relentless innovation while being a force for good. For more details check out http://www.generalmills.com General Mills India Center (GIC) is our global capability center in Mumbai that works as an extension of our global organization delivering business value, service excellence and growth, while standing for good for our planet and people. With our team of 1800+ professionals, we deliver superior value across the areas of Supply chain (SC) , Digital & Technology (D&T) Innovation, Technology & Quality (ITQ), Consumer and Market Intelligence (CMI), Sales Strategy & Intelligence (SSI) , Global Shared Services (GSS) , Finance Shared Services (FSS) and Human Resources Shared Services (HRSS).For more details check out https://www.generalmills.co.in We advocate for advancing equity and inclusion to create more equitable workplaces and a better tomorrow. Job Overview Function Overview The GIC Supply Chain team manages end-to-end operations, encompassing planning, sourcing, manufacturing, logistics, and analytics. They strategically plan to meet market demands, optimize sourcing, ensure efficient production, and oversee the seamless movement of goods from production to delivery. The team employs advanced analytics throughout these processes, fostering adaptability and operational excellence. This collaborative approach ensures a well-coordinated supply chain that aligns with both organizational goals and dynamic market conditions. For more details about the Function please visit this Link Purpose of the role The purpose of this role is to leverage Controls Engineering expertise to virtually lead initiatives and solutions aimed at assessing, solving, and improving manufacturing plant productivity and optimizing costs. This requires strong functional knowledge in plant engineering and effective customer relationship skills. Key Accountabilities Controls Systems Engineering: Drive productivity (system utilization), reduce manual effort, production waste and manufacturing cost through strategic use of controls technology Develop global GMI Controls Systems solutions to meet the emerging business needs by leveraging plant process automation technology (viz. Wonderware Archestra, Siemens, Rockwell) Identify operational, quality, system performance opportunities and then recommend / execute controls standard solutions and verify results Share learning’s across the CE/CIS Community Serve as corporate wide resource Provide tactical and strategic operation support to plants in controls and information systems Manage control system architecture Optimize controls infrastructure to Support Business Needs Ensure control systems reliability Software / Hardware up to date Manage Obsolescence Educate plant Engineers and technicians on leveraging GMI Global Controls Engineering standards Technical Problem Solving Analyze cost and performance data, diagnose root cause of manufacturing losses and make recommendations to improve system, equipment and material requirements by leveraging existing and emerging control system technology and methodologies Understand and leverage reliability metrics, system planning and cost tracking systems Collaborate with the plants and central engineering teams for diagnosis, solution design and creating recommendation Perform As a Subject Matter Expert Coach and mentor other engineers on the team as well as plant employees Work effectively in a cross-cultural virtual team using influence and collaboration Create, maintain and adhere to process documentation and strive for continuous improvement Perform other duties as assigned Education Minimum Qualifications Bachelor’s degree in engineering in anyone: Instrumentation, Electrical, Electronics, Telecommunication Any relevant Certification in Control Engineering Experience: Related Experience: 5-8 years Specific skills requirement: Demonstrated experience in Controls and Systems Engineering domain on the Shop Floor - Automation experience in the areas of PLCs (Rockwell /Siemens), SCADA (Aveva Wonderware/Ignition), and Historian configuration Familiarity with common field devices and instruments (VFDs, load cells, control valves, level, pressure, temperature, flow, and position sensors) Understanding of network architecture and various industrial communication technologies and topologies, including Ethernet, ControlNet, Device Net, and experience with remote I/O Experienced in OT related data and communications (Wonderware system platforms, Modbus, OPC UA, MQTT) Knowledge in IT Systems (Servers, Windows Operating Systems, Terminal Services, Virtualization, Cloud solutions) Understanding of manufacturing industry standards (ISA S88 S95) and Familiarity with a relevant and globally supported framework Ability to navigate through changes and uncertainty with professionalism. The willingness and experience to work hands-on is most important for this role. Demonstrated ability to motivate and innovate, excellent team building and leadership skills. Able to communicate clearly and effectively with all levels.

Role Overview: As a Rolling Mill Level 1 Automation Engineer based in Hyderabad, you will be responsible for engineering, programming, testing, and commissioning automation systems for flat and long rolling mills. Your role will involve preparing IO lists, I/O engineering, and related automation drawings, as well as commissioning automation systems based on PLCs for various types of mills and processing lines in India and abroad. Additionally, you will provide post-commissioning and service support to ensure the smooth operation of the systems. Key Responsibilities: - Perform Level 1 Automation tasks including PLC/Technological controls/HMI Software engineering for flat and long rolling mills. - Prepare IO lists, I/O engineering, and automation drawings. - Detail interfaces for MCCs, drives, measuring systems, Level 2 systems, and package units. - Commission automation systems for hot mills, cold mills, long rolling mills, and processing lines. - Provide post-commissioning and service support. Qualifications Required: - University Degree in Electrical or Electronics Engineering (B.E or B. Tech). - 4 to 12 years of work experience. - Good knowledge of PLC programming using Ladder logic/Function block diagram/Continuous flow charts (CFC) on platforms like Siemens/ABB/TMEIC. - Programming knowledge of technological systems like Siemens PCS7/Siemens TDC/SMS X-pact/Hi-Pac is desirable. - Working knowledge of HMI systems like Siemens WinCC/Wonderware. - Familiarity with the process of hot mills, cold rolling mills, long rolling mills, and processing lines is desirable. - Good communication, analytical skills, and interpersonal skills. - Willingness to travel for site commissioning work in India and abroad. Additional Details: SMS India Pvt Ltd, a subsidiary of SMS group Mnchengladbach, Germany, is located in Gurugram with offices in Pune, Kolkata, and Mumbai. The company also has a state-of-the-art manufacturing and service workshop in Bhubaneswar, Odisha, and a new production facility in Sanand, Gujarat. SMS group is committed to shaping the future of the metals industry towards carbon-neutral and sustainable practices. If you are passionate about contributing to innovative projects and working in an international environment, SMS India offers a performance-driven work culture and the opportunity to achieve a balance between work and personal life. To apply for the role of Rolling Mill Level 1 Automation Engineer, please send your application to Buena Mathew at buena.mathew@sms-group.com.,

Hyderabad OR Chennai We are seeking talented individuals to join our growing team! CONVERGIX Automation Solutions leverages the strengths, experience, and capabilities of our existing businesses, along with new talent, to transform and grow into the ultimate automation solutions trusted partner, capable of solving any industrial automation challenge. Responsible for virtually all technical work with respect to projects and service provided to customers. As an MES and Controls Engineer, you apply creativity and technical knowledge to develop, design, and implement control and information systems solutions. The role involves direct interaction with customers, providing tier-1 service, support, and expertise in project management and business development. What would a typical day be like? Work on various stages of information and control projects including PLC programming, HMI design, SCADA system design, electrical design and code development for data management systems Testing, troubleshooting, debugging and commissioning complex systems Leveraging industry best practices and tools to deliver solutions across multiple industries (i.e., food, beverage, CPG, automotive, pharmaceutical, etc.) Working with a team of highly functioning professionals who have a passion for integrating world-class solutions for Fortune 500 customers What qualifies you for this opportunity? Experience in the manufacturing software arena, particularly using software that can be described as Information/MES/IIoT Experience working in an industrial manufacturing environment and with industrial controls Proven expertise in areas such as requirements specification, architecting solutions, systems analysis, and design. Certified with Inductive Automation’s Ignition Platform software; experience with Sepasoft and/or Cirrus Link Solutions integrated modules an asset. Demonstrable understanding of industrial automation PLC platforms, network design and implementation, OT/IT configurations, production and engineering processes. Advanced experience using industrial software packages provided by any or all the following vendors: Rockwell, Siemens, Aveva/Wonderware and GE. Experience with network architecture design, system virtualization, and associated design tools Experience using software and systems like MQTT, Azure DevOps, AWS, Node-Red, and Docker an asset. Development experience using Python, Java, JavaScript, and/or Microsoft .NET Experience with database software such as Microsoft SQL Server, PostgreSQL, MySQL, Oracle, and/or InfluxDB Familiar with application development methodologies, techniques and standards, configuration management, middleware, networking and communication, and hardware configuration Project management experience an asset. Physical Demands While performing the duties of this position, the employee is regularly required to stand, walk, sit, use hands to feel objects, reach with hands and arms, stoop, kneel, talk and hear. Specific vision abilities required for the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. What does CONVERGIX Offer You? Here at CONVERGIX, we offer a very generous compensation and benefits package including: Clear paths for career advancement and opportunities for professional development Hands on experience with the latest automation technologies and tools The chance to be part of a globally recognized workplace that consistently develops cutting-edge solutions that set industry standards A diverse and inclusive atmosphere that provides support for employees from all walks of life About Convergix Automation Solutions Convergix Automation Solutions is a Global Systems Integrator specializing in custom automated manufacturing systems including, robotics, controls, material handling, information and software systems, process automation in a variety of manufacturing industries. With over 900 employees, 25+ Locations worldwide and $300M in Sales, Convergix is growing organically as well through acquisition to become a leading $1B Automation Integration global partner. We are a single source automation solutions provider that leverages the geography, technology, industry expertise and capacity of the entire Convergix portfolio across the entire value chain for our customers in a diverse set of industries. Learn more about us: https://convergixautomation.com/ What does CONVERGIX value? Our values are our foundational concepts on which we build CONVERGIX; we adhere to these no matter what mountain we climb. Integrity - Respect, Transparency, Commitment Excellence - Continuous Improvement, Innovation, Collaboration, Communication Passion - Momentum, Sense of Urgency, Growth, Success, Velocity Why join the CONVERGIX team? As a growing company in the industrial technology industry and rooted with strong corporate values, CONVERGIX Automation Solutions can offer a unique value proposition to employees. We are expanding at a rapid pace as we continue the path to be a $1 Billion company. CONVERGIX brings a new, holistic approach to automation throughout the value chain. At CONVERGIX, products, technology, experience, support and expertise intersect to empower customers in every industry to reach their full potential. We thank all candidates for their interest, however only those considered for an interview will be contacted. CONVERGIX Automation Solutions has an accommodation program in place that provides reasonable accommodations for employees with disabilities. If you require a specific accommodation because of a disability or a medical need, please contact Human Resources.

Role Purpose: The Cybersecurity Lead Engineer is primarily responsible for the technical execution & delivery of a range of lifecycle Cybersecurity solutions and services for our external customers, Key responsibilities include performing site visits to maintain security solutions, evaluating existing and new technologies, providing security training, and consulting on security matters when required, The Cybersecurity Lead Engineer also represents Schneider Electric as a technical consultant with the proficiency to identify and discuss new Cybersecurity opportunities with customers and Account Managers, Preferred Experience: Experience working within an OT Industrial Control Systems which may include one or more of the following technologies: DCS, SCADA, PLCs, HMI, Data Historians including OSI PI, EDNA, Wonderware An understanding of Cybersecurity Frameworks (e-g NIST, NCSC, ISO 270001, COBIT) and ICS protocols (e-g BACnet, Modbus, PROFINET, PROFIBUS) Experience of performing the installation and/or management Intrusion detection systems (IDS) and intrusion prevention systems (IPS) Experience performing the installation and/or management of network-based firewall products (Fortinet, Cisco, Juniper, Palo Alto, Sophos, SonicWall etc) Experience implementing and managing virtual environments including performing network troubleshooting (VMware, Microsoft Hypervisor) Experience with advanced Windows administration (e-g AD, DNS, DHCP, RAS, WSUS, GPOs) Experience in implementing Host-based security technologies including end point protection technologies (e-g Antivirus, Data Leakage Prevention, Host IPS, Whitelisting, XDR, EDR, NDR) Experience in implementing backup, NAS, SAN and restoration technologies (e-g Symantec, VERITAS, ACRONIS, VEEAM) Experience in developing and delivering end user training Experience in developing, evaluating, implementing Security Policy and Procedures Competencies: Excellent Consultancy and Communication skills to help identify, prioritise/negotiate customer needs anticipate issues, trends and opportunities for improvement, present compelling recommendations for change and follow through to a conclusion, Analytical skills to critically evaluate the information gathered from multiple sources Effective time management, stakeholder management and organizational skills, Can take full responsibility for executing tasks, sometimes at remote locations, Proficient technical writing skills to communicate information effectively to customers, Project Managers, and other Cybersecurity staff Fluent English (fluency in another language also an advantage Qualifications: Bachelors Degree in a computer related field, plus one of the following certifications: Cisco Certified Network Associate Security (CCNA Security) Cloud Security Certification (CCSP) Certified Information Systems Security Professional (CISSP) Certified Information Security Manager (CISM) Certified Information Systems Auditor (CISA) Certified Ethical Hacker (CEH) Global Industrial Control System Security Professional (SANS-GICSP) Computer Hacking Forensic Investigator (CHFI) ISA99 or IC32-34 related OT certification Let us learn about you! Apply today, You must submit an online application to be considered for any position with us This position will be posted until filled, Looking to make an IMPACT with your career When you are thinking about joining a new team, culture matters At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success We believe that our IMPACT values Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork starts with us, IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world, We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization We celebrate IMPACT Makers and believe everyone has the potential to be one, Become an IMPACT Maker with Schneider Electric apply today! ?36 billion global revenue +13% organic growth 150 000+ employees in 100+ countries #1 on the Global 100 Worlds most sustainable corporations You must submit an online application to be considered for any position with us This position will be posted until filled, Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best We mirror the diversity of the communities in which we operate, and ?inclusionis one of our core values We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do, At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders You can find out more about our Trust Charter here Schneider Electric is an Equal Opportunity Employer It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct, Show more Show less

Hyderabad OR Chennai We are seeking talented individuals to join our growing team! CONVERGIX Automation Solutions leverages the strengths, experience, and capabilities of our existing businesses, along with new talent, to transform and grow into the ultimate automation solutions trusted partner, capable of solving any industrial automation challenge. Responsible for virtually all technical work with respect to projects and service provided to customers. As an MES and Controls Engineer, you apply creativity and technical knowledge to develop, design, and implement control and information systems solutions. The role involves direct interaction with customers, providing tier-1 service, support, and expertise in project management and business development. What would a typical day be like? Work on various stages of information and control projects including PLC programming, HMI design, SCADA system design, electrical design and code development for data management systems Testing, troubleshooting, debugging and commissioning complex systems Leveraging industry best practices and tools to deliver solutions across multiple industries (i.e., food, beverage, CPG, automotive, pharmaceutical, etc.) Working with a team of highly functioning professionals who have a passion for integrating world-class solutions for Fortune 500 customers What qualifies you for this opportunity? Experience in the manufacturing software arena, particularly using software that can be described as Information/MES/IIoT Experience working in an industrial manufacturing environment and with industrial controls Proven expertise in areas such as requirements specification, architecting solutions, systems analysis, and design. Certified with Inductive Automation’s Ignition Platform software; experience with Sepasoft and/or Cirrus Link Solutions integrated modules an asset. Demonstrable understanding of industrial automation PLC platforms, network design and implementation, OT/IT configurations, production and engineering processes. Advanced experience using industrial software packages provided by any or all the following vendors: Rockwell, Siemens, Aveva/Wonderware and GE. Experience with network architecture design, system virtualization, and associated design tools Experience using software and systems like MQTT, Azure DevOps, AWS, Node-Red, and Docker an asset. Development experience using Python, Java, JavaScript, and/or Microsoft .NET Experience with database software such as Microsoft SQL Server, PostgreSQL, MySQL, Oracle, and/or InfluxDB Familiar with application development methodologies, techniques and standards, configuration management, middleware, networking and communication, and hardware configuration Project management experience an asset. Physical Demands While performing the duties of this position, the employee is regularly required to stand, walk, sit, use hands to feel objects, reach with hands and arms, stoop, kneel, talk and hear. Specific vision abilities required for the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. What does CONVERGIX Offer You? Here at CONVERGIX, we offer a very generous compensation and benefits package including: Clear paths for career advancement and opportunities for professional development Hands on experience with the latest automation technologies and tools The chance to be part of a globally recognized workplace that consistently develops cutting-edge solutions that set industry standards A diverse and inclusive atmosphere that provides support for employees from all walks of life About Convergix Automation Solutions Convergix Automation Solutions is a Global Systems Integrator specializing in custom automated manufacturing systems including, robotics, controls, material handling, information and software systems, process automation in a variety of manufacturing industries. With over 900 employees, 25+ Locations worldwide and $300M in Sales, Convergix is growing organically as well through acquisition to become a leading $1B Automation Integration global partner. We are a single source automation solutions provider that leverages the geography, technology, industry expertise and capacity of the entire Convergix portfolio across the entire value chain for our customers in a diverse set of industries. Learn more about us: https://convergixautomation.com/ What does CONVERGIX value? Our values are our foundational concepts on which we build CONVERGIX; we adhere to these no matter what mountain we climb. Integrity - Respect, Transparency, Commitment Excellence - Continuous Improvement, Innovation, Collaboration, Communication Passion - Momentum, Sense of Urgency, Growth, Success, Velocity Why join the CONVERGIX team? As a growing company in the industrial technology industry and rooted with strong corporate values, CONVERGIX Automation Solutions can offer a unique value proposition to employees. We are expanding at a rapid pace as we continue the path to be a $1 Billion company. CONVERGIX brings a new, holistic approach to automation throughout the value chain. At CONVERGIX, products, technology, experience, support and expertise intersect to empower customers in every industry to reach their full potential. We thank all candidates for their interest, however only those considered for an interview will be contacted. CONVERGIX Automation Solutions has an accommodation program in place that provides reasonable accommodations for employees with disabilities. If you require a specific accommodation because of a disability or a medical need, please contact Human Resources.

As a Service Manager at Swiss MNC's Indian Subsidiary with over 15 years of presence and 1000+ clients/installations in India, your role will involve: - Lead the integration of automation devices into customers" production lines. - Develop integration guidelines and examples for PLCs, SCADA systems, and fieldbus communication protocols. - Provide advanced troubleshooting support to customers and internal teams. - Train and mentor service engineers in industrial automation and communication systems. - Collaborate with international experts and stay updated on the latest technologies. - Manage client relationships, ensuring successful project delivery and support. Qualifications required for this role include: - B.E. or Diploma in Electrical, Instrumentation, or Electronics & Communication. - 5-10 years of experience in PLC, SCADA, Industrial Automation & Communication. Desired Skills: - Strong expertise in industrial communication systems and PLC/SCADA integration. - Hands-on experience with Siemens, Allen-Bradley, Beckhoff PLCs and SCADA tools (Codesys, WinCC, Wonderware, etc.). - Excellent communication and leadership skills. - Proactive, customer-oriented, and able to lead a distributed team. - Fluency in English; Hindi & additional language knowledge is an added advantage. In addition to the above responsibilities and qualifications, as part of Swiss MNC's Indian Subsidiary, you will have the opportunity for leadership growth in a collaborative, global environment. The company offers a competitive 13-month salary package based on experience & skills, performance-based incentives, medical insurance, festival bonus, and a supportive work environment for your professional development.,

Role & responsibilities Design, develop, and configure SCADA applications using AVEVA System Platform (Wonderware), Historian, and InTouch HMI. Implement object-oriented design in System Platform (templates, instances, symbols, attributes). Develop dashboards, alarms, reports, and trends for real-time monitoring and decision support. Integrate SCADA/MES with PLC/DCS systems (Siemens, Allen-Bradley, Schneider, etc.). Configure and maintain AVEVA Historian and SQL database connectivity for data storage and reporting. Support MES functionalities such as OEE, downtime tracking, and production monitoring. Ensure cybersecurity, redundancy, and system performance optimization. Preferred candidate profile Strong hands-on experience with AVEVA System Platform (ArchestrA, Galaxy, InTouch OMI). Experience with AVEVA Historian, InTouch HMI, MES Operations, Performance, and Batch (any combination). Knowledge of object-oriented development in industrial SCADA environments. Familiarity with PLC/DCS programming & industrial communication protocols (Modbus, OPC DA/UA, Ethernet/IP, Profibus, etc.). SQL database knowledge (queries, stored procedures, reporting tools).

Roles and Responsibilities: PLC/HMI/SCADA Programming for various applications and various sectors like Mining, O&G, Power, Pharma, Automotive etc. Design and develop Industrial automation applications for discrete, process and hybrid Manufacturing. Collaborate with multi-functional teams to provide Industrial Automation solutions for Digital Manufacturing. Assure all design & project work is completed in compliance with all Regulatory requirements, Quality, Engineering design requirements & procedures. Mandatory skills : Bachelors Degree in Instrumentation/Electronics/Electrical Engineering with 5 to 10 years experience in Industrial Automation area. Experience in working with various Automation OEM or Systems Integrators – PLC controllers like -Rockwell/Siemens/Schneider/Codesys etc. Knowledge of PLC programming, configuration of SCADA software packages, display building, database creation, testing and report generation. Experience in providing the network architecture for connectivity of PLC/DCS/OPC/HMI for software integration Experience in various SCADA platforms such as – AVEVA Plant SCADA 2020, Citect, GE Proficy, Wonderware, Siemens Win CC, RA Factory Talk Must have good knowledge on Communication and SCADA protocols like IEC101, IEC104, MODBUS and DNP Understanding of single line diagrams (SLD) of substations, I/O list. Expertise in Industrial automation - Best Practices, Industry Standards and integration methodologies Knowledge regarding concepts Smart Factories and Industry 4.0 is considered as plus. Desired Skills: Ability to work independently with minimum direct supervision. Good problem-solving skills and ability to dig in to research issues as needed. Strong collaboration skills working in a team environment. Experience in project realization, local/ international project environment. Good communication and interpersonal skills and the ability to effectively communicate and report at all levels Verbal and written fluency in English. Proficient in Microsoft Office (Excel, Word, PowerPoint & Visio). Roles and Responsibilities Under general supervision, develops, codes, test, and debugs new software or enhancements to existing software customers. Requires good understanding of business application. Works with technical staff to understand problems with software and resolve them. Resolves customer complaints with software and responds to suggestions for improvements and enhancements from customers. May assist in development of software user manuals. Demonstrates software. Note: If the incumbent is responsible for the development of software for internal use, please match to a position in the Application Development sub-family grouping.

Hands on experience with various PLC programming software (Preferably Rockwell, Siemens, Schneider) Hands on experience with various SCADA/HMI software application programming (Preferably with Rockwell, Wonderware, Siemens, Schneider). Minimal hands-on experience using the PLC and SCADA programming softwares. Electrical design knowledge in developing Control / MCC panel schematics. Knowledge on EPLAN software. Knowledge on PLC, MCC & PCC panel wiring. Open mindset and willing to learn MCC, PCC, PLC panel wiring. Lead a project team to execute the project from concept to completion. Develop design and development documents related to the project. Lead and Conduct Hardware & Software Factory Acceptance Test with clients. Lead and Conduct Field installation & commissioning including Site Acceptance Tests. Candidate must possess Diploma/Degree in Engineering (Electrical/ Instrumentation/ Mechatronic). Be flexible to travel within India & abroad for project implementation. This role includes 80 to 90% of travel. Willing to learn and have good growth mindset. Note - For first six months you will be in training, In the training period you will work in typical electrical panels (MCC & PCC). On successful completion of this training you will be moved to PLC role. Based on your performance your training period may increase or decrease. · Evaluates and performs basic to moderately complex troubleshooting, and obtains support from supervision, and engineering as needed. · Perform other duties as assigned or as needed. · The ability to meet deadlines under pressure · Must take initiative to evaluate, troubleshoot and resolve assembly problems. · Assembles very small to very large sized parts and performs wiring assembly. · When discrepancies occur between bill of materials and drawings, utilizes independent judgement to determine course of action. · Performs entire wiring assembly operation of one job (from pre-arranged kit) from start to finish. Candidate should able to fluently communicate in tamil & english. Job Types: Full-time, Permanent, Fresher Pay: ₹10,000.00 per month Ability to commute/relocate: Eachanari, Coimbatore, Tamil Nadu: Reliably commute or planning to relocate before starting work (Required) Application Question(s): Did you read the note section in job description? Education: Diploma (Required) Language: Tamil, English (Required) Willingness to travel: 75% (Required) Work Location: In person

About The Role Skill required: IX Intelligent Capital Project Operations - Low Carbon Grid Capital Projects Designation: Capital Projects Management Specialist Qualifications: BTech Years of Experience: 7 to 11 years About Accenture Accenture is a global professional services company with leading capabilities in digital, cloud and security.Combining unmatched experience and specialized skills across more than 40 industries, we offer Strategy and Consulting, Technology and Operations services, and Accenture Song all powered by the worlds largest network of Advanced Technology and Intelligent Operations centers. Our 699,000 people deliver on the promise of technology and human ingenuity every day, serving clients in more than 120 countries. We embrace the power of change to create value and shared success for our clients, people, shareholders, partners and communities.Visit us at www.accenture.com What would you do? We are looking for a skilled and detail-oriented SCADA Display Engineer to join our team. The SCADA Display Engineer will be responsible for the design, development, and maintenance of the SCADA system displays used to monitor and control power systems, industrial processes, or other critical infrastructure. The role involves working closely with operational teams, engineers, and IT specialists to ensure real-time visualization of system data is accurate, intuitive, and user-friendly SCADA Display Design & DevelopmentDesign, develop, and optimize graphical user interfaces (GUIs) for SCADA systems. Create intuitive, clear, and informative displays that represent system status, trends, alarms, and other relevant data for operators and engineers. Develop custom widgets, symbols, and dashboards to meet specific project requirements. Implement dynamic features such as real-time data updates, trending, alarms, and event displays. System Integration & ConfigurationCollaborate with control engineers and SCADA system integrators to ensure that displays are correctly integrated with real-time data sources, such as PLCs, RTUs, and sensors. Configure SCADA systems to enable seamless data flow from field devices to graphical displays. Test and validate the integration of system data into the SCADA interface to ensure accuracy and reliability. User Experience (UX) OptimizationWork with end-users, such as operators and control engineers, to gather feedback and ensure displays meet their needs and enhance operational efficiency. Prioritize ease of use, clarity, and quick decision-making in display design. Continuously improve user interfaces based on feedback and evolving system needs. Alarms and NotificationsConfigure alarm indicators and event handling within SCADA displays, ensuring that operators can quickly identify issues. Ensure proper alarm management, such as color coding, alarm priority, and clear visual cues for critical events. Design and configure event logs and historical data access within the SCADA system. What are we looking for? Work closely with control systems engineers, SCADA system administrators, and IT teams to ensure the SCADA system s integrity, security, and efficiency. Participate in cross-functional project teams, supporting system design and operational needs. Stay up-to-date with the latest SCADA software, display technologies, and best practices in the industry. Suggest improvements to display functionality and user interaction based on emerging technologies and evolving industry standards. Data Driven Approach Data Reporting Roles and Responsibilities: Bachelors degree in electrical engineering, Computer Science, or a related field. 3-5 years of experience in SCADA display design, control systems, or human-machine interface (HMI) development. Proficiency in SCADA/HMI software such as Wonderware, iFix, Ignition, or Siemens WinCC. Strong understanding of SCADA system architecture, control systems, and industrial automation. Experience with graphical design software (e.g., Adobe Illustrator, CorelDRAW) is a plus. Knowledge of industrial protocols (e.g., Modbus, OPC, DNP3, IEC 61850) and networking. Familiarity with data visualization principles, including trends, charts, and real-time monitoring. Excellent problem-solving and analytical skills. Strong communication skills, both written and verbal, for documentation and collaboration. Qualification BTech

About The Role Project Role : Enterprise Technology Architect Project Role Description : Support sales teams in solution development, managing an internal matrix team to scope and price solutions. Lead customers through the design process. Work directly with Internal Accenture Domain Architects, Partner Architects, Client Architects, and Accenture project teams to design solutions. Must have skills : Manufacturing Operations Good to have skills : NA Minimum 15 year(s) of experience is required Educational Qualification : BE or BTech or MBA not mandatory Summary :As an Enterprise Domain Architect for CG&S Manufacturing, you will provide deep functional process and high-level technical expertise to analyze, define, design and support the delivery of functional and technical capabilities for an application/ group of applications, in the manufacturing operations space for Consumer Goods and Services (CG&S) clients. This role involves collaborating with various teams and ecosystem partners to design and implement efficient, scalable, and secure solutions for CG&S clients. Roles & Responsibilities:-Conceptualization and design of manufacturing operations solutions for CG&S clients, from a functional process perspective as part of client pursuits and projects.-Actively leading and participating in sales pursuits and presales engagements, with responsibility for new project wins. This will involve multiple discussions and presentation of our capability and solution to potential clients and other stakeholders/ leaders.-Work with top ecosystem partners towards building solutions for client pursuits and projects and proof of concepts esp. around their niche and latest offerings. -Facilitate and drive impact assessment, due diligence and solution blueprint activities and assist in developing and reviewing estimates for client work requests.-Lead solution design and delivery of large and complex transformation programs around manufacturing operations, working with rest of organization, client leaders and ecosystem partners to bring the best tools and delivery methods.-Acting as the go-to-person between business process and technical SMEs.-Active participation and leadership in driving industry related thought leadership activities like patents, authoring whitepapers/ POVs, proof of concepts, conference/ academia presentations, capability presentations etc.Professional & Technical Skills: - Must have Skills: Strong knowledge of batch manufacturing (preferably in CPG/ Food & Bev. industry) and supply chain domain, including manufacturing strategy, regulatory compliance norms, KPIs, industry trends and standards, quality processes (in-line and process completion), Track & Trace, Packaging, in-plant logistics, sustainability etc. -Driving industrial process improvement engagements in own industrial organization or as a consultant.-Strong thought leadership, articulation and presentation skills with the ability to articulate through compelling story telling.-Good to Have Skills: Knowledge of industrial automation involving equipment connectivity, SCADA, HMI, Historian, MES-MOM-QMS knowledge for any package -Knowledge of PLM-ERP-MES connectivity.-Intelligent Warehousing & Plant Logistics, ASRS, AGVs, AMRs etc. Additional Information:-This position is based at Bengaluru, Pune location.-A BE/ BTech, MBA (not mandatory) is required. Qualification BE or BTech or MBA not mandatory

🔹 About the Role We are l o oking for a skilled PLC & SCADA Programmer to join our automation team. The ideal candidate will have hands-on experience in industrial automation, programming, commissioning, and troubleshooting PLC & SCADA systems for various industries. 🔹 Key Responsibilities • Design , develop, and program PLCs (Siemens, Allen-Bradley, Delta, Mitsubishi, etc.) • Config ure and customize SCADA/HMI applications (WinCC, Wonderware, Ignition, etc.) • Perfor m testing, debugging, and troubleshooting of automation systems • Suppor t installation, commissioning, and maintenance of control systems on-site • Collab orate with cross-functional teams to deliver automation projects on time • Prepar e technical documentation, reports, and system manuals 🔹 Requirements • Diplom a/Degree in Electrical, Electronics, Instrumentation, or related field • Proven experience in PLC & SCADA programming • Strong knowledge of industrial communication protocols (Modbus, Profibus, Ethernet/IP, OPC, etc.) • Abilit y to read and interpret electrical drawings & P&ID diagrams • Hands- on experience in field commissioning and system integration • Strong problem-solving skills and willingness to travel for project work 🔹 Nice to Have • Experi ence in robotics, motion control, or IIoT solutions • Famili arity with VFDs, sensors, and instrumentation systems 🔹 What We Offer • Compet itive salary package • Exciti ng and challenging automation projects • Growth opportunities in a fast-developing industrial automation company • Suppor tive and innovative work environment

Job Responsibilities: Develop, program, and test PLC logic for various automation projects (Siemens, Allen-Bradley, Schneider, ABB, etc.). Configure and integrate SCADA/HMI systems with PLCs. Design and implement control logic as per process requirements, P&IDs, and functional specifications. Conduct FAT (Factory Acceptance Tests) and SAT (Site Acceptance Tests) along with commissioning at client sites. Troubleshoot PLC, SCADA, and instrumentation issues during execution. Collaborate with design, panel building, and execution teams to deliver complete automation solutions. Prepare documentation (I/O lists, program backups, user manuals, as-built drawings). Ensure compliance with safety and industry standards in programming and commissioning. Job Requirements: Education & Experience: Diploma / B.Tech in Electrical / Electronics / Instrumentation Engineering. 2–5 years of experience in PLC programming and automation projects (freshers with strong knowledge can also be considered). Technical Skills: Hands-on programming experience with at least one major PLC brand (Siemens, Allen-Bradley, Schneider, ABB, Mitsubishi, Omron, etc.). Knowledge of SCADA/HMI software (WinCC, FactoryTalk, Wonderware, iFix, etc.). Familiarity with industrial protocols (Modbus, Profibus, Profinet, Ethernet/IP, OPC). Understanding of process instrumentation, control loops, and interlocks. Ability to read P&IDs, wiring diagrams, and control philosophy documents. Soft Skills: Strong analytical and problem-solving skills. Ability to work independently as well as in a team environment. Good communication skills for client interaction and technical discussions. Willingness to travel for site commissioning and support. Job Type: Full-time Pay: ₹15,000.00 - ₹30,000.00 per month Benefits: Health insurance Paid sick time Work Location: In person

1. System Design & Development Design and develop automation systems using PLCs, SCADA, HMIs, Robotic Systems and industrial control systems. Prepare engineering documentation including functional design specifications, control narratives, and electrical schematics. Select appropriate hardware and software components for automation systems. 2. Programming & Configuration Develop and test PLC programs (Siemens, Allen-Bradley, Schneider, etc.). Configure SCADA and HMI systems (Wonderware, WinCC, Ignition, etc.). Program, configure, and troubleshoot industrial robots (e.g., FANUC, ABB, KUKA, Yaskawa, Mitsubishi). Develop and optimize robotic motion paths, pick-and-place sequences, welding, palletizing, or other automated processes. Integrate robots with PLCs, vision systems, conveyors, and safety devices. Perform robot simulations and offline programming using tools such as RoboDK, ABB RobotStudio, or FANUC Roboguide. Integrate sensors, actuators, vision systems, robotics, and other industrial devices. 3. Installation & Commissioning Supervise installation, wiring, and commissioning of automated equipment. Conduct system integration tests (FAT, SAT) and ensure systems meet operational requirements. Troubleshoot and debug automation systems during commissioning and production support. 4. Maintenance & Support Provide technical support for automated systems, including diagnosing and resolving faults or performance issues. 5. Training Programmes To Train operators and maintenance personnel on automated systems. Skills: Bachelor’s degree in Electrical, Electronics, Mechatronics, or Automation Engineering. 2–5+ years of experience in industrial automation or control systems engineering. Strong knowledge of PLC, HMI, SCADA, VFDs, Robot brands such as (FANUC, ABB, KUKA, Yaskawa, UR Cobot), industrial communication protocols (Ethernet/IP, Modbus, Profibus, etc.). Experience with control panel design, instrumentation, and industrial sensors. Proficient in AutoCAD, EPLAN, or similar electrical design tools. Excellent problem-solving, analytical, and troubleshooting skills. Ability to work independently and in a team-oriented environment. Strong knowledge of robot brands such as FANUC, ABB, KUKA, Yaskawa, or Mitsubishi. Experience with vision systems, end-of-arm tooling (EOAT), and robotic safety systems.

Job Description – PLC Developer Location: Swargate, Pune Openings: 3 Positions Experience Required: 5+ Years Educational Background: B.E. / B.Tech / Diploma in Electronics & Telecommunication (E&TC) , Electrical , or Instrumentation Engineering Role Overview: We are looking for experienced PLC Developers with strong expertise in industrial automation, control systems, and PLC programming. The ideal candidate will be responsible for designing, developing, testing, and commissioning PLC-based automation solutions for our projects. Candidates should also have a willingness to learn LabVIEW software for integration with DAQ and test automation solutions. Key Responsibilities: Develop, program, and troubleshoot PLC applications (Siemens, Allen Bradley, Schneider, or equivalent). Design and implement automation solutions for industrial processes. Work on HMI/SCADA integration with PLC systems. Collaborate with project teams to define system requirements and specifications. Conduct FAT (Factory Acceptance Test), SAT (Site Acceptance Test), and commissioning activities. Troubleshoot hardware/software issues and provide technical support during project execution. Ensure documentation of PLC logic, wiring diagrams, and project reports. Maintain compliance with industry standards, safety protocols, and client requirements. Provide training and technical guidance to junior engineers/technicians if required. Be open to learning and applying LabVIEW software for automation and DAQ projects. Required Skills & Experience: 5+ years of hands-on experience in PLC programming, troubleshooting, and commissioning . Strong knowledge of industrial automation, sensors, actuators, and control systems . Experience with HMI/SCADA software (e.g., WinCC, Wonderware, Ignition, FactoryTalk). Ability to read and interpret electrical schematics, control drawings, and P&IDs . Familiarity with industrial communication protocols (Modbus, Profibus, Ethernet/IP, OPC, etc.). Strong problem-solving and analytical skills with on-site troubleshooting experience. Excellent communication and coordination skills. Willingness to learn LabVIEW software for future project needs. Educational Qualification: B.E. / B.Tech in Electronics & Telecommunication (E&TC) , Electrical Engineering , or Instrumentation Engineering Diploma in Electrical / E&TC / Instrumentation with relevant experience can also be considered Work Location: Swargate, Pune (On-site requirement; willingness to travel for commissioning if required) What We Offer: Opportunity to work on cutting-edge industrial automation projects Professional growth and learning environment Exposure to diverse industry domains (Defence, Automotive, Process etc.) Training and exposure to LabVIEW software integration Job Types: Full-time, Permanent Work Location: In person

Job Title: SCADA Engineer Location: Odisha, Paradeep Experience Required: Minimum 2/3 Years Qualification: B. Tech Electrical with minimum 2 years of relevant experience , OR Diploma Electrical with minimum 3 years of relevant experience . Roles & Responsibilities: Design, develop, and implement SCADA systems for monitoring and controlling industrial processes. Configure and maintain PLC, RTU, and HMI systems . Perform system troubleshooting, debugging, and testing . Prepare technical documentation, configuration reports, and user manuals . Ensure network connectivity, data integrity, and cybersecurity of SCADA systems. Support commissioning, installation, and maintenance activities at project sites. Work closely with cross-functional teams for system integration and optimization . Ensure compliance with industry standards, safety protocols, and quality requirements . Key Skills Required: Strong knowledge of SCADA software platforms (e.g., Wonderware, WinCC, iFIX, Ignition). Hands-on experience with PLC programming (Siemens, Allen Bradley, Schneider, etc.) . Familiarity with industrial communication protocols (Modbus, Profibus, OPC, DNP3, IEC 61850, etc.). Experience in HMI design, data logging, and reporting tools . Ability to troubleshoot hardware/software issues in real-time. Job Type: Full-time Pay: ₹15,000.00 - ₹35,000.00 per month Benefits: Health insurance Paid sick time Provident Fund Work Location: In person

Job Description – PLC Developer Location: Swargate, Pune Openings: 3 Positions Experience Required: 5+ Years Educational Background: B.E. / B.Tech / Diploma in Electronics & Telecommunication (E&TC) , Electrical , or Instrumentation Engineering Role Overview: We are looking for experienced PLC Developers with strong expertise in industrial automation, control systems, and PLC programming. The ideal candidate will be responsible for designing, developing, testing, and commissioning PLC-based automation solutions for our projects. Candidates should also have a willingness to learn LabVIEW software for integration with DAQ and test automation solutions. Key Responsibilities: Develop, program, and troubleshoot PLC applications (Siemens, Allen Bradley, Schneider, or equivalent). Design and implement automation solutions for industrial processes. Work on HMI/SCADA integration with PLC systems. Collaborate with project teams to define system requirements and specifications. Conduct FAT (Factory Acceptance Test), SAT (Site Acceptance Test), and commissioning activities. Troubleshoot hardware/software issues and provide technical support during project execution. Ensure documentation of PLC logic, wiring diagrams, and project reports. Maintain compliance with industry standards, safety protocols, and client requirements. Provide training and technical guidance to junior engineers/technicians if required. Be open to learning and applying LabVIEW software for automation and DAQ projects. Required Skills & Experience: 5+ years of hands-on experience in PLC programming, troubleshooting, and commissioning . Strong knowledge of industrial automation, sensors, actuators, and control systems . Experience with HMI/SCADA software (e.g., WinCC, Wonderware, Ignition, FactoryTalk). Ability to read and interpret electrical schematics, control drawings, and P&IDs . Familiarity with industrial communication protocols (Modbus, Profibus, Ethernet/IP, OPC, etc.). Strong problem-solving and analytical skills with on-site troubleshooting experience. Excellent communication and coordination skills. Willingness to learn LabVIEW software for future project needs. Educational Qualification: B.E. / B.Tech in Electronics & Telecommunication (E&TC) , Electrical Engineering , or Instrumentation Engineering Diploma in Electrical / E&TC / Instrumentation with relevant experience can also be considered Work Location: Swargate, Pune (On-site requirement; willingness to travel for commissioning if required) What We Offer: Opportunity to work on cutting-edge industrial automation projects Professional growth and learning environment Exposure to diverse industry domains (Defence, Automotive, Process etc.) Training and exposure to LabVIEW software integration Job Types: Full-time, Permanent Pay: ₹284,702.58 - ₹1,205,144.47 per year Experience: PLC programming: 3 years (Required) Location: Swargate, Pune, Maharashtra (Required) Work Location: In person

About The Role Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Manufacturing Engineering MES Good to have skills : NAMinimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Lead for Packaged Application Development, you will be responsible for leading the effort to design, build, and configure applications, acting as the primary point of contact. Your typical day will involve utilizing your expertise in Manufacturing Engineering MES to ensure the successful delivery of projects. Roles & Responsibilities:-Well versed with ITIL and be able to handle Incidents, Problems, and Changes for MES, quickly resolving critical issues (P1/P2) and implementing changes.-Collaborate closely with business teams to understand needs and refine solutions.-Tackle complex technical and operational challenges effectively-Set up and roll out MES software, including Linux Docker applications.-Provide expert support, troubleshooting, and deep analysis for MES apps, especially on Linux and Werum PAS-X. Professional & Technical Skills: -Experience with Werum PAS-X, including end-to-end implementations, upgrades, and migrations, and daily operations in a Linux environment.-Strong skills in installing, deploying, and troubleshooting Linux Docker, Openshift or Kubernetes.-Hands-on experience with configuration and troubleshooting MES peripherals like Scales, Printers, Scanners, PASX2X adapters, and MSI/DCS Batch Adapters.-Ability to diagnose and troubleshoot SNET, firewall issues, and application performance problems related to network configurations.-In-depth understanding of the Pharma Industry, including GxP compliance.-Good working knowledge of Oracle databases and postgress.Mandatory Skills: -Werum PASX or any other MES pharma-Linux based Docker or Openshift or Kubernetes.-Oracle / Postgress DB experience-ITIL Management-Experience of L2/L3 support Additional Information:- The candidate should have a minimum of 7.5 years of experience in Manufacturing Engineering MES.- A 15 years full-time education is required.- This position is based out of multiple locations. Qualification 15 years full time education

About The Role Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Manufacturing Engineering MES Good to have skills : NAMinimum 15 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Lead for Packaged Application Development, you will be responsible for leading the effort to design, build, and configure applications, acting as the primary point of contact. Your typical day will involve utilizing your expertise in Manufacturing Engineering MES to ensure the successful delivery of projects. Roles & Responsibilities:-Well versed with ITIL and be able to handle Incidents, Problems, and Changes for MES, quickly resolving critical issues (P1/P2) and implementing changes.-Collaborate closely with business teams to understand needs and refine solutions.-Tackle complex technical and operational challenges effectively-Set up and roll out MES software, including Linux Docker applications.-Provide expert support, troubleshooting, and deep analysis for MES apps, especially on Linux and Werum PAS-X. Professional & Technical Skills: -Experience with Werum PAS-X, including end-to-end implementations, upgrades, and migrations, and daily operations in a Linux environment.-Strong skills in installing, deploying, and troubleshooting Linux Docker, Openshift or Kubernetes.-Hands-on experience with configuration and troubleshooting MES peripherals like Scales, Printers, Scanners, PASX2X adapters, and MSI/DCS Batch Adapters.-Ability to diagnose and troubleshoot SNET, firewall issues, and application performance problems related to network configurations.-In-depth understanding of the Pharma Industry, including GxP compliance.-Good working knowledge of Oracle databases and postgress.Mandatory Skills: -Werum PASX or any other MES pharma-Linux based Docker or Openshift or Kubernetes.-Oracle / Postgress DB experience-ITIL Management-Experience of L2/L3 support Additional Information:- The candidate should have a minimum of 15 years of experience in Manufacturing Engineering MES.- A 15 years full-time education is required.- This position is based out of multiple locations. Qualification 15 years full time education

Job role : Senior Project manager About Us Founded in 2000, Temflo is one of India's leading providers of best-in-class digital instrumentation and automation services to help businesses save time, money, and energy. At Temflo, we orchestrate and offer multifarious services that span across the broadest categories of power electronics, automation, and infrastructure, including state of the art solutions for instrumentation control, education, city beautification, and digital museums- all driven by next-gen technology and innovation. What we deliver- we provide best in AI, ML, cloud hosted solutions. Job Summary We are seeking an experienced Senior Project Manager who will be responsible for leading industrial automation projects, ensuring seamless integration of control systems, and optimizing manufacturing & process automation solutions. The ideal candidate will oversee design, implementation, testing, and commissioning activities while driving innovation in automation technologies Key Responsibilities Project Management : Lead end-to-end execution of Industrial Automation projects, including planning, budgeting, resource allocation, and risk assessment. Control System Design : Develop and implement PLC/DCS-based automation solutions for manufacturing, oil & gas, power, and other industries. SCADA & HMI Development : Design, configure, and integrate SCADA/HMI systems for real-time process monitoring and control. Process Optimization : Analyze, improve, and automate manufacturing processes using Industry 4.0, IoT, and AI-based solutions. Team Leadership : Manage a team of engineers, technicians, and external vendors to ensure timely project execution. Client & Stakeholder Management : Collaborate with customers, vendors, and internal teams to ensure successful project delivery. Technical Documentation : Prepare reports, commissioning documents, and user manuals for automation systems. Candidate Profile Required Qualifications & Experience : Bachelors degree 8+ years of experience in industrial automation projects, PLC/DCS programming(stand-alone), and commissioning. Expertise in Process & Instrumentation Diagrams (P&IDs), electrical schematics, and industrial communication protocols. Proficiency in PLC/DCS platforms (e.g., Siemens, Allen-Bradley, Schneider, GE-Fanuc, ABB, Honeywell, Emerson). Experience with SCADA/HMI systems (e.g., Wonderware, WinCC, FactoryTalk, Movicon, Cimplicity, Ignition). Knowledge of industrial communication protocols (Modbus, Profibus, Ethernet/IP, OPC, IEC61850, MQTT). Strong understanding of IIoT, Industry 4.0, and AI-drivenIoT, Industry 4.0, and AI-driven automation solutions. Preferred Skills & Competencies Excellent problem-solving, decision-making, and troubleshooting skills. Strong leadership, communication, and team management abilities. Ability to write technical reports, business correspondence, and process documentation. Periodic project progress review with Internal & External Stakeholders Vendor Management and strong Procurement, negotiation and order closure Benefits & Perks Competitive salary and performance bonuses Health insurance Professional training and career development opportunities (ref:hirist.tech)

As a Junior Automation Engineer, you will be responsible for working on various automation projects in the field of Electrical, Instrumentation & Control. Your primary focus will be on PLC, Scada, HMI, and VFD systems. You should have a strong educational background with a B.E in Electrical, Instrumentation & Control. To excel in this role, you must possess at least 1 year of experience in automation engineering. Familiarity with Siemens, Allen Bradley, and Wonderware systems will be advantageous. The position is based in Surat. Join our team and contribute to the exciting world of automation engineering!,

AVEVA is creating software trusted by over 90% of leading industrial companies. Job Description: MES Software Engineer/ Sr. Consultant / Consultant Location : Bangalore / Hyderabad Job Type : Full-Time Experience Level : 6–8 years The job We are seeking a skilled and experienced MES Software Engineer to join our team. The ideal candidate will have a strong background in C#, MS SQL Server, JavaScript, and RESTful Web APIs, along with hands-on experience or understanding of Manufacturing Execution Systems (MES). You will work closely with cross-functional teams to design, develop, and implement scalable MES solutions supporting manufacturing processes. Key Responsibilities Design, develop, and maintain applications using C#, .NET Framework/Core, and Web APIs Create and optimize SQL Server queries, stored procedures, and database schemas Implement responsive and interactive front-end components using JavaScript, HTML, and CSS Integrate with external systems (e.g., SAP, PLCs, SCADA) as part of MES architecture Participate in requirements gathering, system design, and code reviews Troubleshoot and resolve application issues in manufacturing environments Collaborate with process engineers and production teams to understand MES requirements Ensure best practices in coding, security, and system performance Maintain detailed technical documentation Required Skills And Qualifications Bachelor's degree in Computer Science, Information Technology, or a related field 6+ years of hands-on experience in C#, .NET, Web API development & MES Proficient in MS SQL Server, including T-SQL, stored procedures, and performance tuning Strong experience in JavaScript and front-end development Experience or exposure to MES systems (e.g., Aveva/Wonderware, Rockwell FT, Siemens Opcenter, etc.), having AVEVA MES technical stack experience is a plus Understanding of manufacturing processes, production workflows, and shop floor integration Familiarity with OPC, PLC communication, and industrial data protocols is a plus Strong problem-solving skills and attention to detail Excellent communication and teamwork skills Preferred Qualifications Knowledge of ISA-95, 21 CFR Part 11, or GMP compliance Experience with reporting tools, dashboards, or historian systems Familiarity with Agile methodologies What We Offer Competitive salary and benefits Opportunity to work on cutting-edge MES solutions Collaborative and growth-oriented work environment Exposure to real-world manufacturing digital transformation Services at AVEVA Our dynamic global team of 700+ engineers, developers, consultants, solution architects and project managers are at the forefront of delivering AVEVA cutting-edge solutions to customers. The work is complex and technical, but immensely rewarding: we empower customers to harness the full transformative potential of AVEVA’s solutions. If you’re analytical, pragmatic, and driven to make a tangible impact on the sustainability of the industrial sector, our team is the perfect place for you. Find out more: https://www.aveva.com/en/about/careers/ India Benefits include: Gratuity, Medical and accidental insurance, very attractive leave entitlement, emergency leave days, childcare support, maternity, paternity and adoption leaves, education assistance program, home office set up support (for hybrid roles), well-being support It’s possible we’re hiring for this position in multiple countries, in which case the above benefits apply to the primary location. Specific benefits vary by country, but our packages are similarly comprehensive. Find out more: aveva.com/en/about/careers/benefits/ Hybrid working By default, employees are expected to be in their local AVEVA office three days a week, but some positions are fully office-based. Roles supporting particular customers or markets are sometimes remote. Hiring process Interested? Great! Get started by submitting your cover letter and CV through our application portal. AVEVA is committed to recruiting and retaining people with disabilities. Please let us know in advance if you need reasonable support during your application process. Find out more: aveva.com/en/about/careers/hiring-process About AVEVA AVEVA is a global leader in industrial software with more than 6,500 employees in over 40 countries. Our cutting-edge solutions are used by thousands of enterprises to deliver the essentials of life – such as energy, infrastructure, chemicals, and minerals – safely, efficiently, and more sustainably. We are committed to embedding sustainability and inclusion into our operations, our culture, and our core business strategy. Learn more about how we are progressing against our ambitious 2030 targets: sustainability-report.aveva.com/ Find out more: aveva.com/en/about/careers/ AVEVA requires all successful applicants to undergo and pass a drug screening and comprehensive background check before they start employment. Background checks will be conducted in accordance with local laws and may, subject to those laws, include proof of educational attainment, employment history verification, proof of work authorization, criminal records, identity verification, credit check. Certain positions dealing with sensitive and/or third-party personal data may involve additional background check criteria. AVEVA is an Equal Opportunity Employer. We are committed to being an exemplary employer with an inclusive culture, developing a workplace environment where all our employees are treated with dignity and respect. We value diversity and the expertise that people from different backgrounds bring to our business. AVEVA provides reasonable accommodation to applicants with disabilities where appropriate. If you need reasonable accommodation for any part of the application and hiring process, please notify your recruiter. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.