5303 Welding Jobs - Page 6

Ø Purpose of Position The job incumbent is responsible for inspection in QA/QC field of IND business (Oil & Gas, Power and Petrochemical Industries) He usually carries out his tasks independently, with minimum supervision, and these may be on well-identified, or isolated assets, or on complex installations. The position performs in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy Ø Major Responsibilities Review of applicable contractual requirements (technical standards, specifications, etc) & highlight execution/inspection problems if any. Inspection of Pressure Vessels & components: (Filters, Boilers, Storage Tanks etc) from raw material stage to final stage, as per different codes & standards like ASME Sec-VIII. Including Documents review like QAP, WPS, PQR, WPQR, NDT procedures, material identification, applicable testing, stage-wise inspection of welding & fabrication like joint fit-up, welding inspection, NDT, components inspection, final inspection like leakage testing by hydraulic & pneumatic means etc. Inspection of Piping: Piping inspection for Process Plant, including activities like stage-wise inspection, components inspection, Dimensional, Spool inspection at fabricator’s site. Inspection of Pipes & Tubes: Inspection of ERW & SS pipes as per ASTM, IS and API standards. Including Raw-material stage to Final inspection i.e. review of documents, witness of strip & pipe U.T., Eddy-current testing, MPT, Hydro-test, mechanical test & other test requirements for black as well as galvanized pipes. Handled many projects of pipes inspection as per different grades. Inspection of piping components like Flanges, Fittings, Valves, Pumps including various testing activities as per applicable piping code & product standard. Inspection of Castings: Inspection of Critical jobs like Shafts & Roller assemblies, Gears, Mill Heads, with activities like Raw Material Identification, Applicable physical & chemical Testing, U.T. in proof machined condition, final inspection after machining, M.P.I., D.P.T. Inspection of Steel structure for hydro power plants: Inspection of structural parts of hydropower projects like radial gates, spillway stop logs, surge shaft, trash racks etc M.P.I., D.P.T., and UT of parts. Also includes inspection of other structural parts like structural steel section, trusses, and towers. Selection of the most appropriate inspection techniques. Monitoring, coaching and supervising of one or more inspectors. Vendor Assessment: An audit activity on documentation & different aspects of quality control & quality assurance at vendor’s site, analysis of system of NC follow ups & effectiveness of implementation of QMS, product testing. Subsequent Vendor Rating on the basis of observations. Capacity assessment of manufacturing facilities of manufacturers for various clients. Project coordination & management: Preparation & implementation of inspection checklists. Project coordination & management for inspection of bought out items and site inspections for various Project coordination for fabricated structural parts Ø Roles & Responsibilities for HSE Must comply the BV Cardinal Safety Rules in all situations. To comply company HSE requirements e.g. policies, Procedures, guidelines etc. and local legal requirements on HSE as applicable To take care of own health and safety as well as colleagues and others. Immediate reporting of any shortcomings on HSE i.e. any incident, unsafe work practices / conditions to his/her immediate Line Managers. Sharing opportunities for improvement on HSE aspects Ø Qualification, Experience & Technical Knowledge B. Tech (Mechanical) with 8 years experience /Diploma (Mechanical) with 10 years experience & ASNT qualification Knowledge of QA/QC is a must Level II qualification in NDT as per service line requirement Knowledge about methodology required for the inspection activities Should have knowledge of IS, ASME, ASTM, API (National and International code ,standard & Specification) and customer requirements

We are looking for an experienced Plumber to join our hotel team. Work Includes: Fixing water pipes, taps, flush, sinks, etc. Repairing bathroom and kitchen plumbing. Taking care of water tanks, pumps, and geysers. Solving plumbing issues quickly in rooms and hotel areas. Keeping tools and plumbing areas clean and safe. Requirements: 2+ years of plumbing experience ITI or basic plumbing knowledge Honest, hardworking, and ready to work in shifts We Offer: Good salary Food and stay (if needed) Apply Now: share your CV at 8279377037 Job Type: Full-time Pay: ₹18,000.00 - ₹20,000.00 per month Benefits: Food provided Health insurance Paid sick time Paid time off Provident Fund Schedule: Day shift Morning shift Night shift Rotational shift Ability to commute/relocate: Rishikesh, Uttarakhand: Reliably commute or willing to relocate with an employer-provided relocation package (Required) Location: Rishikesh, Uttarakhand (Required) Work Location: In person

Job Title: Hydro Mechanical (HM) Manager Location: Madhya Pradesh / Nashik Role Overview We are seeking a highly experienced and result-oriented Hydro Mechanical Manager to oversee the execution and management of Hydro Power/pumped storage projects. The incumbent will be responsible for managing HM works including fabrication, erection, testing, commissioning, and maintenance of hydro mechanical equipment, gates, penstock lining, and related structures. The role requires strong leadership, technical expertise, and hands-on experience in hydro power/pumped storage project execution. Key Responsibilities Lead and manage the Hydro Mechanical (HM) team to ensure smooth execution of all HM-related activities at the project site. Supervise installation, alignment, welding, and quality control of penstocks, gates, hoists, and other HM equipment. Plan, monitor, and control HM construction schedules, manpower deployment, and material requirements. Coordination with civil, electrical, and project planning teams to ensure timely completion of milestones. Ensure adherence to safety standards, quality specifications, and statutory regulations at the site. Review engineering drawings, technical specifications, and ensure compliance during execution. Liaise with consultants, customer, contractors, and equipment suppliers to resolve technical and execution-related issues. Provide on-site technical guidance, troubleshooting, and mentoring to staff. Monitor cost control measures and prepare progress reports for management review. Ensure preventive and corrective maintenance of HM works during execution and post-commissioning stages. Qualifications & Experience Education: Bachelor’s degree in mechanical engineering (preferred) or Diploma in Mechanical Engineering. Experience: 15 to 20 years of proven experience in Hydro Power/ Pumped Storage projects, specifically in hydro mechanical works. Strong expertise in penstock fabrication & erection, HM equipment installation, testing, and commissioning. Hands-on experience in site management, manpower handling, and coordination with multiple stakeholders. Skills Required: In-depth knowledge of hydro mechanical systems, standards, and best practices. Strong leadership, team management, and problem-solving skills. Ability to read and interpret engineering drawings and technical documentation. Good communication and coordination skills to work with cross-functional teams. Commitment to workplace safety and quality standards.

We have a vacancy for: Quality Inspector Company Name : Catalydd Engineering & Consulting Services LLP. Website : www.catalydd.com Company Profile : Quality Management Services to Automobile sector. Company Head Office Location : https://maps.app.goo.gl/bJp294HFcmjKkTc29 Catalydd Head Office Address : Besides Raaga Hotel, Office No. 3, First Floor, Above Design9 Office, Royal Arcade, near Akurdi Railway Station Road, Sector No. 26, Pradhikaran, Nigdi, Pimpri-Chinchwad, Maharashtra 411044 Job Role : Quality Inspector (Quality Associate) Work Location : MIDC, Ranjangaon, Tq. Shirur, Dist. Pune 412 209 Education : Diploma/B.E./B.Tech. (Mechanical/Automotive/Production) only Experience : Experience candidate in the Product Quality inspection Min 1 year & Max 2 years Industry : Sheet Metal / Stamping / BIW Manufacturing Industry with Welding & Painting background Responsibilities : 1. Experience in Product i.e. Sheet Metal / Staming Part inspection (Visual & Dimensional). 2. Good knowledge of Stamping defects / welding defects / paining defects. 2. Hands-on experience in measuring instruments handling like (Vernier , Micrometer, Height Gauge, Attribute gauges, Air gauges, TPG etc.) 3. Good knowledge of inspection, measurement techniques, GD&T. 4. Good understanding of Quality standards; inspection reports; Quality Plan. 5. Ability to read Blueprints/Drawings. 6. Good written & verbal communication skills Other Requirement : 1. Aggressive Attitude. 2. Willing to stay near the plant location. 3. Medically fitness mandatory. 4. Work Discipline (Safety, Quality). 5. Communication on daily work management to Client SPOC person/ Project Leader Monthly CTC : 19000/- Rs to 21000/- Monthly In Hand Salary : 14000/-Rs to 16000/-Rs Food Facility: Not Available. (1000/-Rs per month extra paid) Transport Facility: Not Available. (1000/-Rs per month extra paid) Working Days : 6 Working Hours : 8 Hrs (Excluding Breaks) Shift : Rotational Shift Weekly Off : Sunday Attendance bonus: For 100% attendance you will get 500/- Rs attendance bonus every month. Benefits : * PF, ESIC , etc. * Will help in building a career in the Quality Department * Will get training on various Quality Tools. If JD, position, department, salary & location matches with your expectation and you can join immediately or max in 15 days of time then share the updated resume at the earliest. You have to attend a first telephonic interview & found suitable then Face To Face Technical interview at Ranjangaon. Regards, Name : Ashish Ingole Designation : HR Manager Mobile No. : 8956434981 Email Id : hrm@catalydd.com

Working Location : Magarpatta City , Pune Job Description - Tool & Fixture Design Engineer Hands-on experience in the Fixture Design ,Welding Fixture Design ,Tool Design using the Creo CAD Tool Good understanding of various Manufacturing processes, Resting, locating, and clamping (3,2,1) principles Good in GD&T and Drafting Knowledge of PDM, Windchill, Materials used for Fixture design, welding symbol, and heat treatment process. Knowledge of Limit Fit and tolerances, Geometric tolerances. Good communication . Required skill Minimum 1 years of hands-on experience in assembly tools and fixture design. Proficiency in utilizing Creo Software for design of tools & Fixtures Expertise in creating 2D drawings with GD&T knowledge. Strong understanding of manufacturing processes like welding, machining -required for tool design Ability to select suitable materials for the construction of tools, fixtures, and tackles. Skills & Experience Fixtures Design, Heat Treatments, Welding, Manufacturing, and Manufacturing Processes. About GGS Engineering Services:- GGS Engineering Services is a market leader in providing engineering services and technology solutions for Major OEMs around the globe. We offer comprehensive, innovative, and cost-effective solutions covering Product Development, Systems Engineering, and Manufacturing Engineering for global customers. GGS ES group companies have 5,000+ associates across global locations. We adopt a proactive approach to serving our clients in America, Europe, the Middle East, and Asia Pacific. Our expertise lies within the Automotive, Commercial Vehicles, Farm Equipment, Aerospace, and Construction and Industrial Equipment. For further details please refer to our website:- https://ggsengg.com/

Job Title: Quality Engineer Company: Raunaq Engineering Pvt. Ltd. Location: Pune, Maharashtra (Unit I) Experience: 2-5 Years Industry: Heavy Fabrication & Machining Department: Quality Assurance / Quality Control Employment Type: Full-Time Company Overview: Raunaq Engineering Pvt. Ltd. is a trusted name in the field of heavy-duty fabrication and machining. We are committed to delivering precision-engineered solutions with a focus on quality, safety, and timely delivery. We are an ISO-certified company with modern facilities and a strong reputation in the engineering sector. Job Description: We are seeking a dedicated Quality Engineer to join our QA/QC team. The role involves ensuring that all fabrication and machining activities meet customer specifications, internal quality standards, and statutory regulations. Key Responsibilities: Conduct in-process and final inspections of fabricated and machined components Review and maintain quality records, inspection checklists, and reports Coordinate with the PPC and Production teams to ensure timely inspections and rectification of quality issues Perform root cause analysis and drive corrective & preventive actions (CAPA) Handle customer quality audits and third-party inspections Review welding documentation, NDT reports, and final quality dossiers Ensure compliance with ISO 9001, ASME, IBR, and other relevant industry standards Manage calibration of instruments and ensure proper use of inspection tools Support internal audits and maintain QMS documentation Candidate Requirements: Diploma / B.E. / B.Tech in Mechanical Engineering 3–5 years’ experience in QA/QC in a heavy fabrication & machining environment Sound knowledge of fabrication drawings, GD&T, welding procedures, and NDT Familiar with standards like ISO 9001, ISO 3834, ASME, and IBR Strong reporting, documentation, and communication skills Hands-on experience in handling customer inspections Job Type: Full-time Pay: ₹20,000.00 - ₹40,000.00 per month Benefits: Provident Fund Application Question(s): How many years have you worked in metal fabrication or related quality roles? Do you have experience with metal fabrication processes (e.g., sheet metal, welding, machining)? What is your current or most recent annual CTC ? What are your salary expectations for this role at Raunaq Engineering? How have you applied quality control techniques—like SPC, FMEA, or weld inspection—in past metal fabrication projects? Do you have audit experience? What is your total experience, and how many of those years are in fabrication? Work Location: In person

Role Description This is a full-time on-site role for a Senior Mechanical Design Engineer located in Dehradun. The Senior Mechanical Design Engineer will be responsible for developing and designing mechanical systems and components. Daily tasks include creating detailed designs, using Auto Cad & Solid Works software, overseeing the product design process, and collaborating with cross-functional teams to ensure design specifications are met. The role also involves conducting design reviews, troubleshooting design issues, and ensuring compliance with relevant standards and regulations. Qualifications Bachelor's degree in Mechanical Engineering or a related field with min. 7-8 years of experience Design Engineering, Product Design, Machine Design skills Mechanical Engineering skills Proficiency in Computer-Aided Design (CAD) software & Solid works Excellent problem-solving and analytical skills Strong attention to detail and accuracy Ability to work effectively both independently and within a team Fabrication & welding line experience is a plus Salary ₹4.0–5.0 LPA (negotiable based on expertise)

Inspection and Verification: Perform comprehensive visual and instrumental inspections of incoming materials, in-process components, finished products, equipment, structures, and installations. Verify adherence to engineering drawings, specifications, procedures, and quality control plans (QCPs) and Inspection and Test Plans (ITPs). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalie s, electrical faults, and deviations. Witness and review various tests (e.g., hydrostatic tests, load tests, electrical insulation tests, material tests, welding NDT, functional tests) to ensure correct procedures are followed and results are accurate. Compliance and Standards Adherence: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, IS codes, relevant electrical codes, local building codes, environmental standards). Verify material traceability and certification. Promote and ensure compliance with all health, safety, and environmental (HSE) policies and procedures during all inspection activities and project work. Report any unsafe practices or conditions. Documentation and Reporting: Prepare detailed, accurate, and timely inspection reports, checklists, test reports, and non-conformance reports (NCRs). Maintain comprehensive records of all inspection activities, findings, observations, measurements, photographic evidence, test results, and corrective actions taken. Document measurements and observations meticulously. Contribute to the development and update of inspection checklists, procedures, and methodologies. Problem Solving and Continuous Improvement: Identify deviations, non-conformities, and potential risks, initiating and tracking the resolution of non-conformities. Participate in root cause analysis for quality issues and contribute to the development and implementation of effective corrective and preventive actions (CAPA). Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Contribute to the continuous improvement of inspection processes, procedures, and the overall quality management system. Stay updated with the latest industry standards, technologies, and regulatory changes in relevant engineering fields. Liaison and Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel, production teams, maintenance teams) and external parties (e.g., clients, suppliers, third-party inspection agencies, regulatory bodies). Communicate inspection findings, recommendations, and compliance issues clearly and concisely to all relevant stakeholders, both verbally and in writing. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. This job is provided by Shine.com

Job Description: Production Head Company: Architecture Metalworks Location: Vasai – Mumbai Department: Production Company Overview Architecture Metalworks is a leading innovator in precision metal fabrication and advanced manufacturing. We deliver bespoke metal components and large-scale structures, known for engineering excellence, timely delivery, and operational perfection. Job Summary Architecture Metalworks seeks an experienced Production Head to lead our manufacturing operations. This role oversees all production aspects, from planning to quality control. We need a strategic leader with a proven track record in optimizing workflows, managing teams, and driving continuous improvement in metalworking or heavy manufacturing. Key Responsibilities Strategic Planning & Execution: Develop and implement production plans to ensure efficient, cost-effective manufacturing, meeting quality and delivery targets. Operational Management: Oversee daily production, including scheduling, resource allocation, inventory, and maintenance, ensuring smooth operations. Team Leadership: Lead, mentor, and motivate production teams, fostering accountability, safety, and high performance. Process Optimization: Identify and resolve inefficiencies, implementing lean principles and best practices to boost productivity and reduce waste. Quality Assurance: Collaborate with Quality Control to maintain stringent standards, ensuring products meet specifications and regulations. Budget Management: Manage the production budget, monitoring expenditures and identifying cost savings without compromising quality or safety. Safety & Compliance: Champion a strong safety culture, adhering to company policies and industry standards. Technology & Innovation: Recommend new technologies and methods to improve efficiency, capacity, and quality. Cross-functional Collaboration: Partner with Engineering, Sales, Supply Chain, and Maintenance to align production with business goals. Reporting: Prepare and present performance reports to senior management. Qualifications Required: Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering. 10+ years in production management within metal fabrication, heavy manufacturing, or automotive. 5+ years in a senior leadership role (e.g., Production Manager, Plant Manager). Expertise in lean manufacturing, Six Sigma, or continuous improvement. Strong understanding of metalworking processes (cutting, welding, forming, machining, assembly). Proficiency in ERP/MRP systems. Preferred: MBA or related technical Master's degree. Lean, Six Sigma, or PMP certifications. Experience with advanced manufacturing technologies (robotics, automation). Skills Exceptional leadership and team-building. Strong analytical and problem-solving. Excellent communication (written and verbal). Strategic thinking and results-oriented. Ability to manage multiple priorities in a fast-paced environment. Proficiency in MS Office Suite; CAD/CAM knowledge is a plus.

Inspection and Verification: Perform comprehensive visual and instrumental inspections of incoming materials, in-process components, finished products, equipment, structures, and installations. Verify adherence to engineering drawings, specifications, procedures, and quality control plans (QCPs) and Inspection and Test Plans (ITPs). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalie s, electrical faults, and deviations. Witness and review various tests (e.g., hydrostatic tests, load tests, electrical insulation tests, material tests, welding NDT, functional tests) to ensure correct procedures are followed and results are accurate. Compliance and Standards Adherence: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, IS codes, relevant electrical codes, local building codes, environmental standards). Verify material traceability and certification. Promote and ensure compliance with all health, safety, and environmental (HSE) policies and procedures during all inspection activities and project work. Report any unsafe practices or conditions. Documentation and Reporting: Prepare detailed, accurate, and timely inspection reports, checklists, test reports, and non-conformance reports (NCRs). Maintain comprehensive records of all inspection activities, findings, observations, measurements, photographic evidence, test results, and corrective actions taken. Document measurements and observations meticulously. Contribute to the development and update of inspection checklists, procedures, and methodologies. Problem Solving and Continuous Improvement: Identify deviations, non-conformities, and potential risks, initiating and tracking the resolution of non-conformities. Participate in root cause analysis for quality issues and contribute to the development and implementation of effective corrective and preventive actions (CAPA). Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Contribute to the continuous improvement of inspection processes, procedures, and the overall quality management system. Stay updated with the latest industry standards, technologies, and regulatory changes in relevant engineering fields. Liaison and Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel, production teams, maintenance teams) and external parties (e.g., clients, suppliers, third-party inspection agencies, regulatory bodies). Communicate inspection findings, recommendations, and compliance issues clearly and concisely to all relevant stakeholders, both verbally and in writing. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. This job is provided by Shine.com

Working at Freudenberg: "We will wow your world!" This is our promise. As a global technology group, we not only make the world cleaner, healthier and more comfortable, but also offer our 52,000 employees a networked and diverse environment where everyone can thrive individually. Be surprised and experience your own wow moments. Klüber Lubrication is a global leader in specialty lubrication and part of the Freudenberg Group. With subsidiaries in 30+ countries and partners worldwide, our custom solutions support nearly every industry - from automotive to food processing. Join us to drive innovation, sustainability, and lasting impact - Together beyond lubrication. Some of your Benefits Safe Environment: We strive to ensure safety remains a top priority, and provide a stable environment for our employees. Diversity & Inclusion: We focus on providing an inclusive environment and recognize our diversity contributes to our success. Health Insurance: Rely on comprehensive services whenever you need it. Personal Development: We offer a variety of trainings to ensure you can develop in your career. Sustainability & Social Commitment: We support social and sustainable projects and encourage employee involvement. India - Remote Remote Klüber Lubrication India Pvt. Ltd. You support our team as Territory Head – GIT HI East (F/M/D) Responsibilities Have customer centric approach and maintain a loyal customer base with his services, technical support and relationship. Effectively communicate with all cross-function departments like CSS, Logistics, Q&A, Finance, Production, Customers, CP to ensure sales, service commitments. Achieve the planned sales forecast for the year for both Klüber and OKS brand. To ensure that all the payments are collected from direct as well as channel partners on time. To see that the CRM Opportunity pipeline is adequately filled up. To see that the strategy for Heavy Industry is properly implemented. To see that the customer visits are sufficiently made and CRM discipline - works schedule, call reports, New Opportunities adequately filled time to time. To monitor the lead generated by Marketing and see that the maximum is converted to sales. To inculcate the culture of Value selling in the area. To collaborate with internal and external team for business growth and extend To see that all the Market segments have the desired growth. To work hand in hand with all the channel partners of the area and support them for business growth and through the available team members and achieve the desired goals. To motivate and train the channel partner's engineers time to time. To have a focus on the OEMs in the region and leverage the same to find a place in their lube charts. Organize customer seminars, tech days in the region. A focus on Price rise, price effect, Cross selling of products. To focus on Energy efficiency projects, sustainability and digitization projects. Qualifications Graduate Engineer in Mechanical / Chemical with 10 - 12 years of sales experience in Industrial lubricants / MRO products / Welding electrodes / Bearings / Other Industrial fields. Good Technical Knowledge, communication, motivation, meeting sales goals, negotiations, sales planning, building relationships, manage processes. The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law.

strong knoweldge in plumbing Job Type: Full-time Pay: ₹19,000.00 - ₹22,000.00 per month Benefits: Health insurance Provident Fund Work Location: In person

We are a forward-thinking company focused on establishing a strong presence in AI and machine learning, delivering innovative automation solutions across diverse industries. Job Position- Production Engineer. Qualification- BE / Diploma in Mechanical Engineering. Experience- 3 to 4 years. Location- Village Jambhe, Near Punawale, Pune. CTC- Rs.6L- 8L PA. 2nd and 4th Saturday off. Plan and oversee the production activities, manage manpower, maintain the quality standard, ensure compliance with safety protocols. Candidates from machine manufacturing / automation industries are preferred. Key skills- Production Planning and control. Manpower management. Material planning. Continuous improvement methods, Kaizen, 5s. Good communication skills. Innovative thinking. Fabrication, Welding, Machining, Machine assembly, Testing. Key Responsibilities. ● Develop and manage the production schedule to meet operational targets. ● Supervise daily production activities in alignment with the production plan. ● Ensure the availability of necessary resources, including manpower, materials, and machinery. ● Identify and resolve production-related issues to minimize delays and eliminate bottlenecks. ● Ensure strict adherence to safety protocols and workplace regulations. ● Implement and monitor the 5S system on the shop floor to maintain organization and efficiency. ● Uphold and maintain established quality standards throughout the production process. Email cv to : Dhairyasheel.jadhav@insightzz.com

Job Opening: Mechanical Assembly Fitter (02-05 Candidates) Location: [Badkhal Lake Chowk, Faridabad (HR)-121001] Job Type: Full-time Gender Preference: Male Salary Range: ₹15,000 – ₹30,000 (Based on skills and experience) Experience Required: Minimum 2–3 years Qualification: ITI or Diploma in Mechanical or relevant field Job Responsibilities: Read and interpret mechanical drawings and machine assembly diagrams. Understand tolerances and fits according to ISO standards. Knowledge of various engineering materials. Read and interpret pneumatic and hydraulic circuit diagrams. Perform quality inspection of machine parts as per drawings and defined tolerances. Carry out machine assembly as per technical drawings and standards. Install and commission machines at customer locations according to their specifications. Obtain MOM (Minutes of Meeting) sign-off post successful project completion. Lead small teams during projects, ensuring coordination and productivity. Use precision quality tools such as: Digital Vernier Caliper Digital Micrometer Height Gauge Dial Test Indicator Puppy Dial Slip Gauge Angle Protractor Modify parts using tool room equipment like M1TR, Surface Grinder, etc. Ensure project completion within deadlines. Maintain effective communication with internal team members and customers. Ideal Candidate Should Have: Strong mechanical aptitude. Attention to detail with quality and precision. Good communication and teamwork skills. Job Type: Full-time Pay: ₹15,000.00 - ₹30,000.00 per month Benefits: Provident Fund Schedule: Day shift Work Location: In person

Post- Marketing executive Product - THRESHER,CAGE WHEEL,RIDGER,LEVELER,CULTIVATORS, HAND TOOLS AND EQUPMENTS,RADIAL DRILL MACHINE,PILLAR DRILL MACHINE, MULTICUTTER MACHINE,LATHE MACHINE,AIR PLASMA CUTTER,WELDING MACHINE, Qualification- Min Graduation Experience – 4 Y to 5 Y Salary – AS par as Interview Location – Raipur (C.G) Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Language: English (Preferred) Work Location: In person

Date: Jul 31, 2025 Location: Pune, MH, IN Apply now » Apply now Apply for Job Enter your email to apply Position Name Senior Manager-Maintenance-Winger Factory-CV Operations -TMCV Position level L5 DEM position name Deputy General Manager – Maintenance DEM position level L4 FEM position name NA FEM position level NA Purpose of the position The position is responsible for timely support & attending PM and breakdowns at BIW Fixtures, Welding Controllers, Transformers, TCF equipment’s, EMS , Hoist Cranes, Filling Equipment’s and EOL equipment of Winger Factory . Personal Profile Education B.E./B.Tech in Electrical /Electronics Skills Strong knowledge in Maintenance and Reliability Problem solving techniques Electrical drawing reading Knowledge of Electrical & electronics Knowledge of upcoming machine technologies Ability to analyze & diagnose machine problems & chronological decisions for corrections. Ability to work under pressure Result oriented. Interpersonal skills People Management. Relevant Experience 3-8 years Having Maintenance knowledge of Computerized Maintenance management system (SAP-PM) Job Responsibility S.N. Job Responsibility 1 Functional Development Attend, Supervise and manage Electrical Break down of machines & equipment at BIW & TCF line of Winger Factory. Reduction in breakdown time & timely support to upkeep of machines & equipment. Schedule and execution of Electrical Preventive & predictive Maintenance activities Document and prepare daily progress reports and maintenance logs. Maintenance of electronics, electrical drives, PC ware and networking. Daily updation and monitoring of maintenance performance- SQPDCME, Breakdown time, 5’s, suggestion, improvements etc Daily monitoring usage of energy in terms of Electrical Power consumption. Identify new energy saving ideas and its implementation. Installation, commissioning and programming of VFD and its maintenance Resolve electrical maintenance issue raised in IRC & DSC meetings. Provision and maintenance of lighting and fan facilities in Shop. Compliance of portable equipment inspection. Periodic checking of earth pits. 3 Relationship Development Building the team for in-house electrical repair activity Building the electronics repair skill within team members. Imparting Small group activities within team members Participation of team members in various company initiatives Resolving the issue through internal and external communication Interaction with supply to understand & resolve issues timely Apply now » Apply now Apply for Job Enter your email to apply

Responsibilities: Install, repair, and maintain plumbing systems and fixtures Read blueprints and drawings to determine the layout of plumbing systems Inspect and test plumbing systems for safety and functionality Handle pipe fitting, drainage systems, water supply lines, and sanitation units Follow safety standards and building regulations Requirements: Proven experience as a plumber Ability to work independently and as part of a team Good knowledge of water distribution and waste disposal systems Relevant trade certification or license (preferred) Willingness to travel to different sites if needed Job Types: Full-time, Permanent, Fresher Pay: ₹15,000.00 - ₹30,000.00 per month Benefits: Paid time off Schedule: Day shift Morning shift Work Location: In person

POSITION - ARC WELDER LOCATION SURAT, GUJARAT. SALARY RS.18-25K + ACCOMODATION+LOCAL TRANSPORT+ SUBSIDISED FOOD+ INSURANCE+ MEDICAL TRANSPORT FEE FOR THE SELECTED CANDIDATES WILL BE PROVIDED ON PRODUCTION OF TRAIN TICKET. EXPERIENCE 2 YEARS OR MORE INTERESTED ONE CAN CALL 8584828345 Job Types: Full-time, Permanent Pay: ₹18,000.00 - ₹28,000.00 per month Experience: Arc Welding: 1 year (Preferred) License/Certification: welder test certificate (Preferred) Work Location: In person

Job Title: Welder Experience: 4+ Years Location: South America(Guyana) Contact no:9500399685 Email ID: [email protected] Job Description: 1. Welding: Perform various welding techniques, such as MIG, TIG, and stick welding, to repair and fabricate components of crushers and related equipment, including crusher frames, conveyor systems, and chutes. 2. Blueprint Interpretation: Read and interpret blueprints, schematics, and engineering drawings to understand project requirements and welding specifications. 3. Material Preparation: Prepare materials by cutting, grinding, and shaping them to the required dimensions, ensuring a proper fit and alignment during welding. 4. Weld Inspection: Inspect welds for quality, accuracy, and structural integrity, and make any necessary adjustments or repairs. 5. Maintenance and Repair: Conduct routine maintenance and repair tasks on crushers and associated equipment, including welding wear plates, liners, and other components. 6. Safety Compliance: Adhere to safety protocols and guidelines, including the use of personal protective equipment (PPE), to ensure a safe work environment and prevent accidents. 7. Equipment Maintenance: Maintain welding equipment and tools in good working condition, performing regular inspections and minor repairs. Job Type: Full-time Pay: ₹60,000.00 - ₹70,000.00 per month Expected Start Date: 01/08/2025

ITI (Industrial Training Institute) with a welding qualification can find job opportunities in various manufacturing and fabrication industries. These roles typically involve performing welding tasks using different techniques like MIG, TIG, and ARC welding, as well as reading technical drawings and ensuring weld quality. Typical Job Description for an ITI Welder Fresher: · Welding Operations: Performing welding tasks using various methods like MIG, TIG, ARC, or Gas welding. · Material Handling: Assisting with material preparation, equipment maintenance, and ensuring a safe working environment. · Blueprint Reading: Interpreting technical drawings, blueprints, and welding symbols. · Quality Control: Ensuring weld quality meets standards and specifications. · Fabrication and Repair: Assisting in fabricating and repairing metal structures, components, and equipment. · Following Instructions: Working under the supervision of experienced welders and following instructions related to specific tasks. · Safety Practices: Adhering to safety regulations and procedures in the workplace. Skills and Qualifications: · ITI in Welding: A certificate or diploma in welding from a recognized ITI. · Basic Welding Knowledge: Understanding of welding processes, techniques, and safety practices. · Physical Fitness: Ability to perform manual tasks and work in various positions. · Attention to Detail: Ensuring accuracy and quality in welding work. · Teamwork: Ability to work effectively with other welders and team members. · Willingness to Learn: Eager to learn new skills and adapt to different welding techniques. What we’re looking for: You've recently completed or are about to complete your ITI in any relevant trade like o Fitter o Welder o Sheet Metal Worker o Fabricator You're eager to learn and have a good attitude. You pay attention to details. You're able to follow instructions. You're comfortable working with your hands. You're interested in learning a valuable skill in the manufacturing industry. What We Offer : A chance to learn a valuable skill in a growing industry. Training and guidance from experienced professionals. A supportive and friendly work environment. Salary & Perks : 12500/- Per Month. Overtime Duty Timing: Mon-Sat 9:00AM to 5:30PM. Ready to Start Your Career at KVIS? If you're a motivated ITI fresher looking for a great opportunity to learn and grow, we encourage you to apply! Send your resume or a simple description of your skills. We're excited to hear from you! Share your Resume on mail-id kvisengg@gmail.com Job Types: Full-time, Permanent, Fresher Pay: From ₹12,500.00 per month Ability to commute/relocate: Mohali, Punjab: Reliably commute or planning to relocate before starting work (Required) Education: Higher Secondary(12th Pass) (Required) Language: Hindi (Required) Punjabi (Required) Location: Mohali, Punjab (Required) Work Location: In person

Key Responsibilities Material & Equipment Inspection Inspect raw materials and critical equipment at vendor sites and stores for compliance with project specs, QAPs, and datasheets. Conduct final inspections before dispatch of rotary and static equipment. Vendor Surveillance & Stage‑Wise Inspection Monitor vendor fabrication, assembly, and testing—using approved ITPs. Verify WPS/PQR, welder qualifications, NDT results, and test certificates. Issue clearance or NCRs based on findings. Third‑Party & Client Coordination Liaise with clients, consultants, and TPIs for joint inspections and approvals. Schedule inspections, track punch‑point closures, and expedite timely sign‑offs. Site Quality Control Activities Supervise installation and erection of mechanical machinery onsite. Conduct alignment, fit-up, welding, and quality checks at installation stage. Proactively implement corrective/preventive actions to avoid delays. Documentation & Reporting Prepare inspection reports, NCRs, MTCs, quality dossiers, and test records. Maintain log of inspection status, approvals, and non-conformances. Ensure full documentation is available for dispatch releases and final project handovers. Compliance to Codes & Standards Uphold engineering codes such as ASME, IS, API, IBR across pressures vessels, heat exchangers, piping, and rotating machinery. Validate thickness checks, hydro-tests, radiography, dye‑penetrant, and other NDT methods. QA/QC Plan Development Support creation of project-specific QAPs, ITPs, and SOPs. Drive continuous improvement in quality processes based on lessons learned. Safety & Risk Management Drive safe inspection practices; report unsafe conditions during handling or lifting heavy equipment. Cross-functional Coordination Collaborate with procurement, engineering, logistics, and project teams for smooth inspection flow and issue resolution. Qualifications & Experience Experience - 5+ years in mechanical QA/QC roles; experience with MSW, ZLD, or industrial projects Education - Bachelor’s in Mechanical Engineering Standards Knowledge - ASME Sec II/III/IX/V, API codes, IS, IBR, etc. Skills - Welding inspection, NDT review, root cause analysis, inspection tools, documentation, teamwork, communication Kindly share your CV on Shivani.singh@detoxgroup.in

Applications Invited for Service Technician Job Type: Full-time Pay: ₹10,000.00 - ₹18,000.00 per month Benefits: Health insurance Leave encashment Provident Fund Work Location: In person

What you will do : Product design & development; Understanding of regulations applicable to devices, particularly standards- including 21CFR820, ISO 13485 throughout the design and development process. Knowledge of material selection, International standards, and norms; Sheetmetal, Welding, Marking Methods like Laser marking, Engraving, Stamping, Silk screening, etc. Proficient in Pro-E; Concept design and development; dFMEA, DFM, Basic GD&T, Tolerance Stack-up. Understanding of biomedical and bio-mechanical engineering, or biomaterials; Basic inspection techniques, inspection methods; Knowledge of manufacturing process, engineering change process, Design Verification and Validation, Design and Risk Management documents; Blueprint/Engineering schematic reading and interpretation. Responsible for the timely and quality deliveries of the assigned tasks; Work as point of contact for all project related aspects with the stakeholders; Ensure continual improvement in delivering higher value services and productivity. Manage partnerships with vendors and SME’s as needed. Contribute to absorption of new technologies, processes and methods. Develop an open culture to instill confidence, diversity of perspectives and knowledge sharing and an environment to focus on customer needs. What you will need: Required- B. Tech / B.E / M. Tech / M.S. – Mechanical Experience: 5-7 years Preferred- Strong analytical skills Effective interpersonal skills Strong communications skills Stryker is a global leader in medical technologies and, together with its customers, is driven to make healthcare better. The company offers innovative products and services in MedSurg, Neurotechnology, Orthopaedics and Spine that help improve patient and healthcare outcomes. Alongside its customers around the world, Stryker impacts more than 150 million patients annually.