Leads the Project with autonomy at site according to the plan Propose the appropriate technical solution to the client Coordinates quality complaints reported to multi-national companies (automotive industry, electronics) Required Candidate profile Minimum 10 years hands on experience in automotive/ engineering/ aircraft industry Extensive and broad ranging commodity knowledge and experience to include structures, Hydraulics, Painting, Coating

Description Responsibilities: Product Development of Fuel Tank and SCR systems for different OEM'S Plan and control all technical issues related to assigned project and support the Program Manager in delivering highest quality solutions to our customers. Cooperate with designer to ensure that tank system architecture meets customer specifications and demands. Act as technical liaison between product development teams and the customer and all other internal functions like design, manufacturing and industrialization. Interpretation of test results and introduction of the necessary actions and modifications as required to ensure that all necessary parts for the customer are available on time. Continuous work with FMEA and DFM/A tools. Knowledge about and compliance to the customer specific requirements A requirement to follow IATF 16949. Ensure proactive requirements and risk management for all technical aspects. Ensure that customer specifications as well as cost targets, design-to-manufacture and timing goals are met Supervise product testing including handling of hazardous substances, interpretation of test results, introduction of the necessary actions and modifications as required to ensure that all requirements are met Support flawless launches by planning and controlling all technical issues related to assigned project and support the Program Manager in delivering highest quality solutions to our customers Provide product engineering expertise in a professional manner during customer visits and audits, with the team as well as in collaboration with other departments (e.g. manufacturing) Act as a Technical Project Lead Engineer with responsibility for a technical team in small/medium complex projects Requirements Degree in Mechanical or Electronical Engineering, Mechatronics or a comparable education 2-4 years experience in Product Engineering or Product Development Ideally experience in automotive engineering for complex mechatronics systems Blow molding or injection molding product design knowledge including welding and assembly is a strong plus Business English & fluent German language skills are necessary Willingness for frequent business travels Additional Competencies Customer focus/Business acumen Communication and presentation skills Dealing with ambiguity Drive for Results Priority Setting Intercultural awareness Enthusiasm for the automotive industry Structured and team-oriented work method Customer intimacy/active listening Integrity and Trust Compassion/Interpersonal savvy Self-Development/Learning on the fly Qualifications Degree in Mechanical or Electronics Engineering, Mechatronics or a comparable education Recruiting Company: Kautex Primary Location: India-Mylasandra-Bangalore Job Function: Engineering Schedule: Full-time Job Level: Individual Contributor Job Type: Entry Job Shift: First Shift Job Posting: 06/13/2025, 11:50:12 AM Job Number: 331815 Show more Show less

📢Exciting Internship Opportunities for Graduates! Are you a recent graduate eager to kick-start your career and gain valuable experience? ASAP Kerala is thrilled to present Internship vacancies in prestigious organizations. Don't miss the chance to embark on a journey of growth and learning. Organization : Fabrion Engineering Designation : Design Engineer, Quality Engineer, Fabricators & Welding Eligibility Criteria Design Engineer & Quality Engineer : B.Tech In Mechanical Engineering. Fabricators: ITI/Diploma in Mechanical Engineering. Welders: ITI in Welders. No of vacancy : 4 Location : Coimbatore, Tamil Nadu Financial Benefits Design Engineer & Quality Engineer: 35000 - 40000 Fabricators & Welders: 25000 - 30000 Experience Design Engineer: 2-3 years’ experience in Design of Piping, Pressure Vessels, Tanks etc. Quality Engineer: 2-3 years’ experience as Quality Engineer for Piping projects/ vessel and tank fabrication etc. Fabricators: 4 years’ experience as Piping, Vessels and Tanks, Structural fitter/fabricator. Welders: 2 years’ experience (SMAW/TIG/MIG) in Radiography quality pipe and vessel/ tank welds Last date to apply : 26/04/2025 How To Apply To apply, https://careerlink.asapkerala.gov.in/ visit and submit your application. Show more Show less

Responsibilities: Product Development of Fuel Tank and SCR systems for different OEM'S Plan and control all technical issues related to assigned project and support the Program Manager in delivering highest quality solutions to our customers. Cooperate with designer to ensure that tank system architecture meets customer specifications and demands. Act as technical liaison between product development teams and the customer and all other internal functions like design, manufacturing and industrialization. Interpretation of test results and introduction of the necessary actions and modifications as required to ensure that all necessary parts for the customer are available on time. Continuous work with FMEA and DFM/A tools. Knowledge about and compliance to the customer specific requirements A requirement to follow IATF 16949. Ensure proactive requirements and risk management for all technical aspects. Ensure that customer specifications as well as cost targets, design-to-manufacture and timing goals are met Supervise product testing including handling of hazardous substances, interpretation of test results, introduction of the necessary actions and modifications as required to ensure that all requirements are met Support flawless launches by planning and controlling all technical issues related to assigned project and support the Program Manager in delivering highest quality solutions to our customers Provide product engineering expertise in a professional manner during customer visits and audits, with the team as well as in collaboration with other departments (e.g. manufacturing) Act as a Technical Project Lead Engineer with responsibility for a technical team in small/medium complex projects Requirements: Degree in Mechanical or Electronical Engineering, Mechatronics or a comparable education 2-4 years experience in Product Engineering or Product Development Ideally experience in automotive engineering for complex mechatronics systems Blow molding or injection molding product design knowledge including welding and assembly is a strong plus Business English & fluent German language skills are necessary Willingness for frequent business travels Additional Competencies: Customer focus/Business acumen Communication and presentation skills Dealing with ambiguity Drive for Results Priority Setting Intercultural awareness Enthusiasm for the automotive industry Structured and team-oriented work method Customer intimacy/active listening Integrity and Trust Compassion/Interpersonal savvy Self-Development/Learning on the fly Degree in Mechanical or Electronics Engineering, Mechatronics or a comparable education Recruiting Company Kautex Primary Location India-Mylasandra-Bangalore Job Field Engineering Schedule Full-time Job Level Individual Contributor Job Type Entry Job Shift First Shift Job Posting 06/13/2025, 5:50:12 AM Show more Show less

We are hiring skilled Co2 welders Who is having good knowledge of Co2 welding.Freshers also can apply Job Types: Full-time, Part-time, Permanent, Fresher, Internship Pay: ₹15,600.00 - ₹18,200.00 per month Expected hours: 48 per week Schedule: Day shift Supplemental Pay: Overtime pay Work Location: In person

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Job Summary: In this role you will perform documented inspections in the verification of conformance of parts to applicable drawings, procedures, specifications and all applicable statutory and regulatory requirements. The QC Inspector is responsible for the content of the Inspection Test Plan (ITP) and project quality plan according to customer’s and Flowserve’s specifications and international standards. Besides, the QC Inspector is responsible for defining, advising and controlling all project required QC documents. The QC Inspector reports directly to the QC Supervisor/Manager. Responsibilities & Requirements: Documenting dimensional and visual inspections to the drawing or applicable procedures Documenting non-conforming material utilizing an NCR (nonconforming materials) process Reviewing and verify internal and external qualifications of suppliers, welders, NDE personnel with regard to Non-Destructive Examinations (NDE), welding procedures and/or other applicable requirements. Reviewing and approve supplier’s manufacturing and testing documents/procedures and to take care for approval (when required) of these documents by the customer, his customer and the authorized inspection body Preparing and define test and inspection requirements for the required projects such as ITP and procurement specifications. HS Diploma / GED and / or 0-2 years relevant experience And any other duties assigned Preferred Experience / Skills: Knowledge of welding, NDE and quality systems Knowledge of the established quality standards, laws and regulations of national and international authorities Must have knowledge of inspection equipment generally found in machining, assembly and test operations Effective utilization of CMMs is a plus Flexible, eager to learn, accurate, analytical with positive, can-do attitude Flexibility and willingness to travel Good interpersonal, communication, negotiation, analytical and presentation skills Problem solving skills Operational Excellence & High Level of Customer Service Standard Req ID : R-15079 Job Family Group : Operations Job Family : OP Quality Assurance EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to [email protected] . In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Grand Rapids, MI Beverlin Manufacturing, a family owned, niche supplier of perforated metal tubes products and assemblies used in the global filtration, exhaust, and industrial markets is looking for an experienced, full time hand welder and fabricator on 1st Shift at our Grand Rapids facility. We run a primary 4 Day Work Week, (Monday – Thursday) 10 hours a day, two shifts with occasional overtime as customer needs dictate. We have a quarterly Bonus based on Metrics and performance We offer a 80 hours of paid time off and insurance upon hire We have competitive Wages that are based on experience, and you can't beat our Culture. If you can demonstrate a strong mechanical aptitude, have a consistent work record and are willing to learn, come and talk to us! Job Summary The individual in this position is responsible for the production of rolled tubes using a variety of equipment and methods including Urethane Rollers, Brake Press, Multi Stage Dies, Jet Line Seam Welder, and Hand Welding. This role requires flexibility and a willingness to “do what it takes” in a fast-paced environment. Required Knowledge, Skills, And Attributes Strong mechanical aptitude TIG welding experience High attention to detail Positive attitude - Team Player Willing to learn and follow established processes Consistent attendance and employment record Experience with measuring equipment (calipers, go/no go gages, etc.) Minimum Qualifications Physical: Ability to lift 50 lbs. on an infrequent basis Education: High School Diploma, equivalency, or relevant experience/certifications Experience: Experience in TIG Welding (1+ year), Sheet Metal Fabrication (1+ Year) Job Type: Full-time Show more Show less

We’re Hiring – Quality Engineer (Welding & Fabrication – TPI) Location: Ahmedabad / Vadodara / Surat, Gujarat Industry: Water & Wastewater Treatment | Environmental Engineering | Manufacturing Are you experienced in quality control, welding, and fabrication inspection? We are looking for a skilled Quality Engineer to join our growing team focused on delivering high-performance solutions in the water and environmental sector. Key Responsibilities Inspect welded structures, piping, and fabricated items as per WPS/PQR standards Coordinate with Third Party Inspection (TPI) agencies and manage documentation Prepare and review Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) Ensure compliance with industry codes and standards (ASME, IS, API, etc.) Oversee QA/QC processes in manufacturing and project execution Support non-destructive testing (NDT) and report quality deviations Collaborate with internal teams to ensure consistent product quality Requirements Diploma or B.E./B.Tech in Mechanical, Metallurgy, or related field 2 to 6 years of experience in QA/QC in welding, fabrication, or manufacturing Sound knowledge of welding techniques, WPS, PQR, TPI, and NDT Familiarity with ISO standards and QMS documentation Experience in water or wastewater treatment equipment manufacturing is preferred Why Join Us Work with a company contributing to critical water and environmental projects Exposure to fabrication, EPC, and manufacturing environments Strong technical team and growth-focused culture How to Apply To apply, share your resume at archita@dreamhrconsulting.com or message us directly on LinkedIn. Please mention your location and relevant QA/QC experience. Show more Show less

SUMMARY Welder We are seeking a dedicated welder to contribute to the achievement of our company's objectives by maintaining machines that manufacture and repair metal structures, tools, and equipment. The ideal candidate will complete all welding and gas cutting tasks within specified timeframes while strictly adhering to safety procedures. In addition to welding responsibilities, the welder will be expected to perform fitting tasks assigned by the Maintenance Supervisor, maintain a clean and organized work area, and ensure compliance with safety regulations. Embracing the company's vision and actively working on waste reduction are also key aspects of this role. Key Responsibilities: Complete welding and gas cutting tasks within specified timeframes while adhering to safety procedures Perform fitting tasks assigned by the Maintenance Supervisor Maintain a clean and organized work area to hygiene standards Weld materials using correct techniques and specialized machinery Assess welded surfaces, structures, and components to identify errors Enforce strict safety regulations and monitor machinery usage and temperature Weld components in various positions and embrace the company's vision Actively work on waste reduction and comply with company policies and procedures Support and promote the highest standards of hygiene at our company's Group Salary Range: Rs 40,000 to Rs 55,000 Key Technical Skills & Knowledge: Knowledge of various welding techniques, including TIG, MIG, arc, and oxy-fuel welding Knowledge of manual and mechanical welding techniques Ability to carry out jobs independently Education/Qualification: Any degree/diploma Experience: A minimum of 5 years of experience as a welder Salary - 50 - 55k Requirements Requirements: Proven experience as a welder Knowledge of various welding techniques Ability to work independently Strong commitment to safety and hygiene standards Benefits 3 years Contract, if performance good renewed for another 3 years. In-case contract is renewed, then wages will be increased for a period of another 3 years. Will be given 1 Round Trip Air Fare (India-Fiji-India) free of cost every 3 years. Will get free accommodation in Fiji & free travel to work while fooding cost will be borne by the candidate which is approx. Rs 5,000 per month. Annual Leaves: Sick Leave will be 10 days, Annual Leave will be 10 days per year along with Gazetted Holidays listed by the Govt of Fiji.

Role & responsibilities Knowledge of Welding and fabrication shop Knowledge of PQCDSM data analysis & action plan for Gap. Knowledge of 5S, TPM, Kaizen. Knowledge of SAP T Code Knowledge of safety measures and procedures Knowledge of IATF 16949 Documentations Knowledge of MIG/TIG/Seam/ Projection/Spot welding processes. Knowledge of Labor deployment monitoring & control Cost consciousness & monitoring Knowledge of budgeting and cost control

Role & responsibilities Knowledge of Welding and fabrication shop Knowledge of PQCDSM data analysis & action plan for Gap. Knowledge of 5S, TPM, Kaizen. Knowledge of SAP T Code Knowledge of safety measures and procedures Knowledge of IATF 16949 Documentations Knowledge of MIG/TIG/Seam/ Projection/Spot welding processes. Knowledge of Labor deployment monitoring & control Cost consciousness & monitoring Knowledge of budgeting and cost control

Position: Junior Engineer Sales Reporting to: Asst. Manager Sales Position Overview: Visit customers, generate enquiries of our products and estabish our market presence. Experience: 1 to 2 Years in Marketing of Industrial Products Age: 22 to 25 Years Qualification:B.E- Mechanical / DME Place of Posting:PAN India Responsibilities: Responsible for Sales & Marketing. Customer visits, new customer’s addition, dealer Management. Key requirements: Knowledge of products in the range of Welding Electrodes, Lubricating oils, Electrical Equipment’s. Cold welding products, Fire retardant Coatings, Specialty Coating etc. Good communication & presentation skills.Must have own two-wheeler. Personal Characteristics: Should be presentable, sincere, hard working capable of smart working. Job Category: Junior Engineer Sales Job Type: Full Time Show more Show less

Their responsibilities include: Inspecting and repairing electrical, plumbing, HVAC, and mechanical systems. Performing routine maintenance on guest rooms, public areas, and hotel grounds. Responding promptly to guest requests for maintenance assistance. Maintaining cleanliness and safety of hotel features like swimming pools and parking lots. Coordinating with vendors and contractors for repairs and upgrades. Keeping detailed records of maintenance activities and supplies used. Following safety protocols and ensuring compliance with industry standards. Job Types: Full-time, Permanent, Fresher Pay: ₹13,000.00 - ₹20,000.00 per month Benefits: Food provided Provident Fund Schedule: Day shift Morning shift Night shift Rotational shift Work Location: In person

Creating passion: Your responsibilities Roles & Responsibilities: Global Welding Standards and Compliance: Establish, interpret, and enforce global welding standards and codes of practice, ensuring full compliance with international regulations and specifications. Continuously monitor changes in international standards and update company procedures accordingly. Process Optimization and Continuous Improvement: Lead global efforts to optimize welding processes, including assessing welding methods, equipment, and materials, with a focus on enhancing efficiency and reducing costs. Initiate and oversee global continuous improvement projects to drive innovation in welding technology and techniques. Procedure Development and Harmonization: Develop and maintain a unified set of welding procedures that encompass various materials, applications, and international locations, ensuring consistency and adherence to global standards. Collaborate with local teams to adapt welding procedures to meet specific project requirements while remaining compliant with international standards. Quality Assurance and Auditing: Develop and implement global welding quality assurance programs, including auditing international sites to assess compliance with quality standards. Conduct comprehensive audits and assessments of international welding activities and provide guidance on corrective actions. Training and Certification Oversight: Establish and oversee global welding training and certification programs to ensure that all welding personnel meet international qualification standards. Monitor and facilitate the certification of welding personnel across international locations. Project Support and Technical Consultation: Provide expert guidance to international projects by evaluating weldability, material selection, and welding process optimization for diverse applications and geographical regions. Serve as a technical authority, offering consultation and problem-solving expertise for complex welding challenges encountered across international projects. Supplier Collaboration and Quality Assurance: Collaborate with international suppliers to evaluate and ensure their compliance with international welding standards. Conduct supplier audits as necessary to maintain high-quality welding materials and components. Documentation Management and Reporting: Maintain comprehensive records of international welding activities, including inspections, certifications, and compliance documentation. Prepare and present detailed reports for management and regulatory agencies, demonstrating international compliance. Safety Leadership and Protocol Enforcement: Lead global safety initiatives by establishing and enforcing international safety protocols and best practices in all welding activities. Foster a culture of safety consciousness and awareness across international teams. Global Welding Project Management: Manage international welding projects, overseeing scheduling, resource allocation, and budget management on a global scale. Monitor project progress, identify potential bottlenecks, and implement solutions to ensure timely completion. Contributing your strengths: Your qualifications Educational & Professional Criteria: Bachelor's degree in Welding Engineering, Mechanical Engineering, or a related field. Certified International Welding Engineer (IWE) or equivalent international welding certification. Proficiency in relevant software and tools for welding engineering and documentation. Experience Level: Minimum of 7 years of international welding engineering experience. Extensive experience with international welding standards and codes. Proven track record in implementing welding quality control systems across diverse international sites. Skill Set Requirements : Profound knowledge of international welding processes, metallurgy, and materials. Expertise in developing and qualifying welding procedures for various materials and applications. Strong problem-solving and analytical skills for addressing complex international welding challenges. Excellent communication and cross-cultural teamwork abilities. Familiarity with international welding inspection techniques and equipment. Have we awoken your interest? Then we look forward to receiving your online application. If you have any questions, please contact Sonali Samal. One Passion. Many Opportunities. The Company Liebherr CMCtec India Private Limited in Pune (India) was established in 2008 and started its manufacturing plant in its own facility on Pune Solapur Highway in 2012. The company is responsible for the production of tower cranes and drives. Location Liebherr CMCtec India Private Limited Gat No. 196-199, Dhaygudewadi Nh-9 Pune India (IN) Contact Sonali Samal sonali.samal@liebherr.com Show more Show less

Preferred candidate profile: Diploma/ITI/Fresher/BE-MECH Available in Hosur, Tamil Nadu Knowledge in 2D and 3D Mechanical drawing. Supervising, Report making, Inspection on Mechanical components. Freshers are welcome. Food allowance Annual bonus

Key Responsibilities and Accountabilities Should Program the Robots as per Customer Requirement. Should Travel across the India, if opportunity comes across Globe. Should be Communicating with Customer, Understand his requirement & satisfies the same requirement. Strong interpersonal skills enabling candidates to work comfortably in both office and shop floor environments while interfacing with people from all levels of the customers organization Able to work flexible hours, based on customer needs and availability of equipment / facilities Support for and participation in team collaborative design, simulation, and offline programming of robotic manufacturing automation systems. Review multiple scenarios in simulation for optimizing system performance Assist with developing and evaluating alternate system layouts, fixture tooling designs, robot configurations, and robot end-of-arm tooling designs Assist with robot reach studies, cycle time analysis, human interface design, and suggest improvements to these. Document the results of these for presentation to the customer. On-site robot programming & teaching, installation & commissioning, troubleshooting & debug. Adhere to and advocate for all Safety Protocols, Safe Operating Procedures, and proper use of Personal Safety Equipment, without exception. (Safety Role Model) Provide technical support for robot installation work done by contractors or customer skilled trades at build, integration, and end-user customer sites Start-up, test, and calibrate all robots on site according to manufacturers procedures Download, install, and debug all robot programs. Touch-up points and paths to achieve design intent, cycle time targets, and eliminate any safety issues Modify existing robot programs or provide new ad-hoc programming on-site to complete system design intent, or to improve robot reliability, maintainability, or performance. Assist with training the customers people in the proper operation and maintenance of all robots in the system Participate in and provide technical support to customers robot safety system testing, validation, approval (production release), and Risk Assessments.

🚨 We're Hiring – Quality (HOS / TL / HOD) 🚨 📍 Location : [Chennai] 🏢 Industry : Tier 1 Automotive (MNC) 👤 Experience : 15+ years in Quality (with 5+ years as Quality Head) Are you a seasoned Quality professional with a passion for excellence and leadership? We are looking for a dynamic Head of Quality to lead our plant's quality function and drive customer satisfaction, process improvement, and supplier quality performance. Key Responsibilities: ✅ Lead and manage a team of 100+ quality personnel ✅ Ensure compliance with Hyundai’s 5-Star Quality System ✅ Implement APQP, PPAP, FMEA, SPC, MSA, 8D, and Six Sigma tools ✅ Collaborate with cross-functional teams to reduce defects and improve quality ✅ Handle customer audits and elevate satisfaction levels ✅ Drive continuous improvement initiatives and cost reductions Preferred Qualifications: 🎓 B.E./B.Tech in Mechanical or Automobile Engineering 🎓 MBA preferred 🔧 Hands-on experience in Sheet Metal, Welding & Stamping 📑 Knowledge of IATF 16949 / ISO 9001 standards If you're a strategic thinker with a strong technical background and leadership capabilities, this is your chance to make a big impact! 📩 Interested candidates can share their resumes at [hr.monisha@bdarttech.com] 📞 Contact: [9840449275] #QualityHiring #AutomotiveJobs #QualityConsultant #QualityHead #ManufacturingJobs #HyundaiSystems #IATF16949 #ProcessImprovement #Leadership #QualityExcellence #NowHiring #SheetMetal #APQP #PPAP Show more Show less

We are looking for a proficient Panel Beater to join our team. Removing, repairing, and replacing damaged panels, frames, and other components, ensuring the reassembly of the vehicle back to the pre-accident condition. Candidates should be experienced in using various tools and techniques to shape, cut, and weld metal panels. Check received parts on arrival, disassemble vehicle as per job sheet, ensuring that all work performed meets industry and safety standards. Responsibilities: Inspect damaged vehicles to assess the extent of repairs needed. Remove, repair, or replace damaged panels, alignment, and fitment. Use hand and power tools to straighten, file, grind, and sand vehicle surfaces. Weld, grind, and smooth surfaces to restore the original shape of panels. Apply body filler to repair dents and scratches, then sanding for a smooth finish. Reassemble vehicles and ensure all parts are functioning properly. Work with paint technicians to prepare vehicles for refinishing. Follow all safety procedures and ensure a clean and organized workspace. Maintain records of work completed and ensure timelines are me. Requirements Proven experience as a Panel Beater or in a similar automotive repair role. Strong knowledge of vehicle body repair techniques and tools. Ability to work with a variety of materials, including steel and aluminum. Proficiency in using welding equipment, hydraulic presses, and spray equipment. Excellent attention to detail and craftsmanship. Ability to read and interpret technical diagrams and specifications. Physical stamina and dexterity to perform manual tasks. Relevant certifications or qualifications in automotive repair. Job Type: Full-time Pay: ₹50,000.00 - ₹70,000.00 per month Schedule: Day shift Work Location: In person

Job family: Manufacturing Business area: Hydropower Contract location: Village Prithla, HR, IN Working location: Village Prithla Location type: Office Location / Office-based Contract type: Permanent Job description: Every day, ANDRITZ continues to deliver successful innovative solutions to our customers globally. Why are we so successful? Because we are passionate and love what we do! We are at the forefront of future engineering technologies, with solutions that ensure the success of our clients in key industries that are shaping the future of the world we live in. What you’ll do: Maintenance Manager to oversee the efficient plant maintenance and safety of our organization’s facilities. As the Maintenance Leader, you will be responsible to manage complete preventive & breakdown maintenance, repairs and spare parts management. As a Maintenance Manager, you will be responsible for managing a team of facility technicians, 3rd parties and coordinating all aspects of investments and facility management and compliance. Candidate should have exposure of handling a green/brown field project or manufacturing expansion project. YOU’RE GOOD AT: Lead, mentor, and manage a team of maintenance engineers and technicians, providing guidance, training, and support. Develop and implement maintenance strategies, policies, and procedures to ensure the smooth operation and functionality of the plant. Oversee the planning and execution of preventive and corrective maintenance programs, ensuring the timely completion of work orders and adherence to quality standards. Coordinate and prioritize breakdown management tasks, managing own resources and co-ordinating with 3rd party service providers effectively and optimizing workflow efficiency. Conduct regular inspections and health assessments of our machines and manufacturing equipment to identify maintenance needs, safety hazards, and compliance issues. Manage vendor relationships and contracts, including obtaining quotes, negotiating pricing and terms, and supervising the performance of outsourced services. Maintain accurate records and documentation of our facilities including work orders, equipment logs, and inventory levels. Develop and monitor investment and maintenance budgets, controlling costs and identifying opportunities for cost savings and operational efficiencies. Ensure compliance with relevant regulatory requirements, building codes, and safety standards. Collaborate with cross-functional teams, such as Manufacturing, HR-ADMIN, IT to address facility-related needs and support their operational requirements. Stay informed about industry best practices, emerging trends, and advancements in facility management and maintenance techniques. Should have hands on experience on VTL & Boring machines Knowledge of Siemens system controller. Formulating action plans for correction of repetitive failure through implementing kaizen to reduce MTBF & MTTR. Facilitating the overall development of team members through effective & need based training and proper work allocation. Experience & Qualifications Bachelor’s degree in Mechanical/Electrical engineering, or a related field and relevant work experience of 15+ years. Minimum 5+ years of maintenance of heavy mechanical manufacturing workshop with following facilities: Large turning & boring machines of 100+ Ton’s capacity & diameter 8 metre+ CNC machines with 3 axis and 5 axis. Fabrication facilities with welding & grinding machines, stress relieving equipment’s, hydraulic press & rolling machines. Facilities for shot blasting, painting and pressure testing units. EOT cranes range from 10T to 100 T. Experience in handling of 1 or 2 green/brown field projects or plant expansion projects. Proven experience in maintenance of heavy machines & utilities at a leadership role and problem solving to make the machines / plant running. Proven experience in plant maintenance or facility management for complete facilities. Demonstrated leadership skills with the ability to effectively manage a team and delegate tasks. Proficient in using computerized maintenance management systems and other relevant software tools. Good understanding of safety regulations and compliance requirements. Exceptional communication and interpersonal skills to lead a team and to collaborate with various stakeholders, including employees, vendors, and contractors. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Requisition ID: 15020

Job Overview: The Senior Source Inspection Specialist uses best practices and knowledge of internal or external issues to improve the Source Inspection discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Source Inspection discipline. They solve complex problems and use their discipline-specific knowledge to improve their products or services. The Senior Source Inspection Spec impacts a range of customer, operational, project, or service activities with the Source Inspection team and other related teams and ensures that they are working within the appropriate guidelines and policies. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably. For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries. Key Tasks and Responsibilities: Act as project-level Focal Point for the SQS process Provide the source inspection plan, work hour budget, and source inspection costs in support of opportunity bidding efforts Manage the complete SQS efforts for multiple projects Develop and implement the source inspection process and coordination/execution plan Manage a team of Inspectors assigned to a specific project Review inspector’s resume and select a qualified inspector for all inspection package Identify key inspection requirements and clarify the inspection scope at the bid stage to the suppliers Review of Material Requisition (MR), Purchase Requisition (PR), and Technical Bid Evaluation (TBE) as applicable per project requirements Develop inspection schedule and plan based on project requirements & number of Pos Develop and distribute inspection assignment packages to the Inspection Agency coordinator Review supplier’s Inspection & Test Plan (ITP), applicable procedures and ensure completeness of manufacturing data records Coordinate the schedule of inspection visits with suppliers, clients, and the Agency Inspector Ensure inspection notices are sent on time to all parties Notify all concerned parties promptly if circumstances require the inspection date to change Participate in Kick-off meetings, Lead the Pre-inspection meeting, and attend critical inspection stages as per the approved ITP Periodically attend meetings/inspections when Agency inspectors conduct the meetings and inspections to evaluate their effectiveness Ensure inspection reports are completed professionally and on time Expedite inspection reports as necessary to maintain the contractual PO delivery date Manage the distribution of inspection reports after review and facilitate the issuance of Inspection release notes after close out of NCRs, and Punch lists if any Manage administration of Inspection resources and close out all SQS assignments Facilitate Supplier Performance Evaluation as required Conduct surveys and audits of manufacturing facilities where necessary Track and manage project inspection budgets against the actual costs incurred by Agency Inspectors Participate in SQS alignment processes with the Quality Management team Perform initial supplier site surveys when qualifying new suppliers or requalifying existing suppliers; update records accordingly Manage the progress of Agency inspectors when they conduct surveys Implement corporate SQS procedures Ensure all SQS personnel are trained in the latest procedure revisions Provide training to other Procurement personnel on SQS corporate requirements as needed Provide reports to Procurement management on source inspection activities and supplier quality issues Provide methods for tracking statistics regarding supplier quality Essential Qualifications and Education: Bachelor’s degree/diploma in, Engineering, Industrial Operations, or Welding preferred 7 to 10 years of Inspection experience preferred. Similar experience in Industrial Engineering, Quality, or Welding will be considered Preferably with experience in Heavy Industrial, Oil and Gas Industry or EPC business Experience in Microsoft Office Professional Experience in the relevant manufacturing industry, lump sum turnkey and modular experience preferred Shows a proven ability to manage and oversee the work of others is desirable Shows attention to detail and an ability to maintain a schedule is preferred CSWIP/AWS, ASNT/ISO 9712 Level II, NACE/BGAS/FROSIO Level II, API certifications, ISO 9001 Lead Auditor etc. are a plus #LI-PM1

Job Overview: The Source Inspection Specialist applies their conceptual knowledge of Source Inspection and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward Source Inspection problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Source Inspection Specialist understands key business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably. For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries. Key Tasks and Responsibilities: Act as project-level Focal Point for the SQS process Provide the source inspection plan, work hour budget, and source inspection costs in support of opportunity bidding efforts Manage the complete SQS efforts for multiple projects Develop and implement the source inspection process and coordination/execution plan Manage a team of Inspectors assigned to a specific project Review the inspector’s resume and select a qualified inspector for all inspection package Identify key inspection requirements and clarify the inspection scope at the bid stage to the suppliers Review of Material Requisition (MR), Purchase Requisition (PR), and Technical Bid Evaluation (TBE) as applicable per project requirements Develop inspection schedule and plan based on project requirements & number of Pos Develop and distribute inspection assignment packages to the Inspection Agency coordinator Review supplier Inspection & Test Plan (ITP), and applicable procedures and ensure completeness of manufacturing data records Coordinate the schedule of inspection visits with suppliers, clients, and the Agency Inspector Ensure inspection notices are sent promptly to all parties Notify all concerned parties promptly if circumstances require the inspection date to change Participate in Kick-off meetings, Lead the Pre-inspection meeting, and attend critical inspection stages as per the approved ITP Periodically attend meetings/inspections when Agency inspectors conduct the meetings and inspections to evaluate their effectiveness Ensure inspection reports are completed professionally and promptly Expedite inspection reports as necessary to maintain the contractual PO delivery date Manage the distribution of inspection reports after review and facilitate the issuance of Inspection release notes after closing out of NCRs, and Punch lists if any Manage administration of Inspection resources and close out all SQS assignments Facilitate Supplier Performance Evaluation as required Conduct surveys and audits of manufacturing facilities where necessary Track and manage project inspection budgets against the actual costs incurred by Agency Inspectors Participate in SQS alignment processes with the Quality Management team Perform initial supplier site surveys when qualifying new suppliers or requalifying existing suppliers; update records accordingly Manage the progress of Agency inspectors when they conduct surveys Implement corporate SQS procedures Ensure all SQS personnel are trained in the latest procedure revisions Provide training to other Procurement personnel on SQS corporate requirements as needed Provide reports to Procurement management on source inspection activities and supplier quality issues. Provide methods for tracking statistics regarding supplier quality Essential Qualifications and Education: Bachelor’s degree / Diploma in Engineering, Industrial Operations, or Welding preferred 3 to 7 years of Inspection experience preferred; similar experience in Industrial Engineering, Quality, or Welding will be considered Prefer experience in Heavy Industrial, Oil and Gas Industry or EPC business Experience in Microsoft Office Professional Experience in the relevant manufacturing industry, lump sum turnkey and modular experience preferred Shows a proven ability to manage and oversee the work of others is desirable Shows attention to detail and an ability to maintain a schedule is preferred CSWIP/AWS, ASNT/ISO 9712 Level II, NACE/BGAS/FROSIO Level II, API certifications, ISO 9001 Lea Auditor, etc., are a plus #LI-PM1

A Structural Engineer with a minimum of 5 years of experience in fabrication structures, proficiency in relevant software, and the ability to provide stability certificates is needed. This role requires expertise in structural analysis, design, and planning of various structures, ensuring their safety and compliance with regulations. The engineer will be responsible for preparing detailed structural plans, performing calculations, and issuing stability certificates. Key Responsibilities: Structural Analysis and Design: Analyse and design various structural components and systems, considering safety, technical, economic, and environmental factors. Fabrication Knowledge: Possess a thorough understanding of fabrication processes, including welding, material handling, and quality control. Software Proficiency: Be proficient in using relevant structural analysis and design software. Stability Certificate Issuance: Be able to prepare and issue stability certificates, ensuring compliance with relevant regulations and standards. Compliance with Regulations: Adhere to relevant building codes, safety standards, and other regulatory requirements. Project Management: May be involved in project planning, scheduling, and coordination. Qualifications: Education: Bachelor's degree in Civil Engineering or related field, with a specialization in structural engineering. Experience: Minimum of 5 years of experience in structural engineering, with a focus on fabrication structures. Certifications: Indian Association of Structural Engineers accreditation or other relevant certifications may be beneficial. Skills: Strong analytical and problem-solving skills, ability to work with detailed plans and drawings, good communication and interpersonal skills. Software Proficiency: Structural Analysis Software: Software like ETABS, SAP2000, STAAD Pro, or RISA can be used for structural analysis. · Design Software: Software like AutoCAD, Revit, or SolidWorks may be used for creating detailed structural plans. Stability Certificates: · Stability certificates are documents issued by qualified engineers confirming the structural soundness of a building or structure. Job Location -GF 11, Wing 2, Hans Bhawan IP Estate, New Delhi 110002. Share your resume at hr@exhicongroup.com Call us:- 9867945578 Website:- https://exhicongroup.com/ Job Type: Full-time Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Health insurance Paid sick time Provident Fund Schedule: Day shift Work Location: In person

Designation : Welder Skill : Mig welding Experience : 2+ years Salary : 20k-45k Location : chennai Job Description : Should have experience in Mig welding , 2G,2F & 3G,3F Must have experience in minimum 16mm welding thickness Willing to work in rotational shift 8 hours work Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹45,000.00 per month Benefits: Food provided Schedule: Day shift Morning shift Rotational shift Experience: Welder: 2 years (Required) MIG welding: 2 years (Required) 2G,2F: 2 years (Required) Work Location: In person

We are seeking for a skilled and experienced fitter reviews specifications and plans before fitting, replacing or constructing parts and equipment using machinery and tools, while adhering to health and safety standards. Your duties include using welding equipment, performing maintenance checks and making, assembling and disassembling metal parts and tools. Material and equipment requirements Operating Computer Numerical Control (CNC) machines Drilling, machining and milling Configuring and fine-tuning metalworking machinery Manually creating fitting components Fitting and assembling metal parts and tools Following health and safety requirements Checking the quality of finished products Implementing the Preventative Maintenance programs for the cooling & heating systems to ensure efficient services to site; Monitor & develop new schedules (where required) for equipment & plant and other relevant data to identify faults and take action as necessary; Performing scheduled and ad-hoc safety checks as per instructions; Investigating failures and making recommendations to reduce risk and improve systems / processes; General maintenance within a factory environment, including blowmoulding, filling machines, packaging equipment, boilers and refrigeration systems. Requirements The ability to competently use hand and power tools The ability to interpret blueprints for mechanical systems Strong analytical and problem-solving skills A relevant trade qualification (mechanical or electrical); Proven experience working as a fitter True team player, with a positive a Can Do attitude essential. Maintenance software experience. ie MEX. International candidates - Demonstrated English language proficiency, which usually involves passing an IELTS or equivalent test Job Type: Full-time Pay: ₹200,000.00 - ₹250,000.00 per month Schedule: Day shift Work Location: In person