224 Visual Inspection Jobs - Page 4

Roles and ResponsibilitiesPreparation and training to Engineers/DETs/Associates about outgoing quality control plan, visual inspection procedures, AQL based inspection plan etc.Clearance of finished good in SAP as per FQA plan and maintain daily reports/records/MISRejecting and returning non-conforming materials to production department for rework/final rejects.Maintain documents of Inspection, reworks, AQL, defects trends analysisMaintain safe and healthy work environment by following defined standards and procedures.Regular feedback to production department about NCs observed and ensure their closures.Issue of SLN (Stop line note) in case of producing non-conformance materials or not following defined SOPs, and control plan and their closures.Handle internal and external CCRs and their closure as per defined SLAs.Ensure CAPA effectiveness for all the complaints by regular audits.Support production and process department in improvement of quality or cost reduction projects.Support packing and dispatch team in improving existing packing material, new packing material design and development to improve quality and cost reduction.Prepare samples for any new customers along with test reports.Quality improvement by working closely with customers by their feedback and requirements.Maintaining limit samples for all type of defectsBenchmarking of cells specifications with other cells in marketClearance of FG in SAP as per SLAs.Coordinate for PDI for customer at shop floor/FG storPrepare samples for reliability tests like PID/LID/Rip-Off/Soldering peel test or any other test as per IEC certification.Profile & Eligible Criteria6-8 years of experience in solar cells manufacturing with preferably in FQA functionDiploma/B.Tech/M.Sc.preferably in electronics

Inspection of Machined Parts Line Inspection Inward inspection Visual Inspection CMM inspection Quality related documentation Note: We require candidates from Mangalore/near by locations only

Roles and Responsibilities Conduct quality audits, inspections, and testing to ensure compliance with industry standards and company policies. NDT, final inspection, incoming inspection, in-process inspection, visual inspection, PDI (Pre-Delivery Inspection), and ASNT Level II certification. Collaborate with cross-functional teams to identify areas for improvement in the production process. Maintain accurate records of quality documentation including test results, inspection reports, and certifications. calibration Follow up for measuring and monitoring instruments .

visual inspection, final inspection

Description We are seeking a detail-oriented Welding Inspector to join our team in India. The ideal candidate will be responsible for ensuring that all welding operations meet the required standards and specifications. You will play a crucial role in maintaining quality and safety throughout the welding process. Responsibilities Conduct inspections of welding processes and finished welds to ensure compliance with specifications and standards. Review and interpret engineering drawings and welding specifications to ascertain requirements. Prepare and maintain detailed inspection reports and documentation of findings. Collaborate with the welding team to address any non-conformance issues and recommend solutions. Ensure that safety protocols are adhered to during welding operations. Perform visual inspections and non-destructive testing (NDT) as required. Skills and Qualifications 2-5 years of experience in welding inspection or related field. Certification in Welding Inspection (e.g., AWS CWI, CSWIP, or equivalent). Strong knowledge of welding processes, techniques, and materials. Proficient in reading and interpreting engineering drawings and specifications. Familiarity with quality control standards and procedures. Excellent attention to detail and strong analytical skills. Effective communication skills, both verbal and written.

Inspection of Machined Parts Line Inspection Inward inspection Visual Inspection CMM inspection Quality related documentation Note : We require candidates from Mangalore/near by locations only

Role & responsibilities Product & Process Quality Management Ensure quality at each stage of module manufacturing from incoming raw material to final module dispatch. Supervise in-process and final inspection activities (visual inspection, EL, IV, Hi-Pot, etc.) Ensure compliance with IEC 61215, IEC 61730, UL, and BIS standards during module testing and validation. Maintain and monitor key quality KPIs such as yield, rework, FPY, and scrap rate. Testing & Inspection Validate test results from equipment like EL tester, IV tester, Hi-Pot, and flash tester. Analyze and report non-conformities in testing parameters and drive resolution. Coordinate with equipment engineers for calibration and routine verification of test equipment. Problem Solving & Root Cause Analysis Lead root cause analysis (RCA) for product or process-related issues. Implement corrective and preventive actions (CAPA) using tools such as 8D, 5 Why, Pareto, and FMEA. Work closely with cross-functional teams (production, maintenance, design) to address and prevent recurring issues. Documentation & Standards Compliance Maintain quality records, test reports, SOPs, and work instructions as per ISO 9001:2015 and other quality systems. Support internal, external, and customer audits with required documentation and evidence. Train junior staff and operators on quality processes and new inspection criteria. Supplier & Customer Interaction Handle customer quality complaints and ensure effective resolution. Support incoming quality team to evaluate critical raw materials (glass, EVA, backsheet, cells, etc.) Participate in supplier evaluations, audits, and performance improvement initiatives. Preferred candidate profile B.E/B.Tech or Diploma in Electrical, Electronics, Mechanical, or related field 48 years of experience in solar module or electronic product manufacturing quality Strong understanding of IEC/UL standards, ISO 9001, BIS, and solar module test protocols Proficient in MS Excel, Minitab/SPC tools, and Quality Management Systems (QMS) Ability to lead audits and RCA independently Pls reach us with your updated Resume at Mail ID: jayanti.m@premierenergies.com Contact No: 8121702182

As a Required Job Inspector for Visual Inspection at Mahalaxmi Inspection Services, your primary responsibility will be to conduct visual inspections to ensure product quality and adherence to specifications. You will be required to perform thorough checks, identify any discrepancies, prepare detailed reports, and collaborate closely with the engineering team to address any issues. Your role will also involve ensuring compliance with industry standards and safety regulations. The ideal candidate for this full-time, on-site position should have experience in visual inspections and Quality Control. Proficiency in using inspection tools and equipment is essential, along with a keen attention to detail and strong analytical skills. Excellent written and verbal communication skills are required to effectively communicate findings and collaborate with team members. The ability to work both independently and as part of a team is crucial for success in this role. Candidates should possess relevant certifications such as ITI, Diploma, or a degree in Engineering, along with a minimum of 2 years of hands-on experience in handling instruments. Prior experience as a supervisor, with the ability to manage and execute daily activities while maintaining strong customer relations, would be advantageous. If you are passionate about ensuring product quality, have a meticulous eye for detail, and possess the necessary qualifications and experience, we encourage you to apply for this challenging yet rewarding opportunity at Mahalaxmi Inspection Services.,

You will be working as a Visual Inspector in a foundry-based company located in Erode, Tamil Nadu, India. Your primary responsibilities will include conducting quality control, inspection, testing, and training activities related to visual inspection processes on-site. To excel in this role, you should possess strong skills in Quality Control, Quality Management, Inspection, and Testing. Previous experience in providing training for visual inspection processes is required. Attention to detail, visual acuity, and the ability to work collaboratively in a team setting are essential qualities for this position. An added advantage would be having experience in the metals industry. A Bachelor's degree in Engineering or a related field is preferred for this role. If you are someone with a keen eye for detail, excellent visual inspection skills, and a passion for ensuring quality standards, then this opportunity might be an ideal fit for you.,

Role & responsibilities IPQA:- Responsible for line clearance and in process checks of Production. Responsible for Sampling of in-process, Finished Product, control samples, stability samples, and Process Validation samples as per procedure. To ensure online rejection activities and environment monitoring in manufacturing and packaging areas. To conduct periodical log review. To review of batch documents (Batch Manufacturing, Batch Packaging records, and Quality Control analysis data of the batch). To ensure online documentation during manufacturing and packaging area. To prepare and review of Quality Assurance Standard Operating Procedures. To ensure Re-processing and Re-packing activity. Responsible to perform Acceptance Quality Limit and Pre Dispatch Inspection of finished product. Responsible for preparation of Annual Product Quality Review. Responsible to maintain the document as per current Good Manufacturing Practices. Responsible to initiate Change control\Deviation\Incident\Market complaint\non-conformance investigation. To assist the Head of Department for preparation of regulatory inspection. Any other responsibility assigned by Head of Department. Quality Management System:- 1. To coordinate with cross functional department for execution of training planners and maintain training record for same. 2. To master, issue and retrieve of SOPs/BMR/BPR/QC dockets and other documents in-line with the laid down procedure. 3. To maintain vendor related documents and conduct vendor audits. 4. To investigate and prepare Market Complaint investigation report. 5. To take follow up and communicate with customer/vendor regarding Complaint. 6. To handle Change control/Deviations/Incidents/NCR/CAPA. 7. Review of quality technical agreements.

Raunaq Engineering Pvt. Ltd. is hiring a Production Engineer (25 yrs exp) for its Bhosari MIDC plant. Role involves planning, shop floor supervision, fabrication/machining, reporting, and coordination with PPC, QA, and Store Dept. Annual bonus Provident fund

You will be joining Mahalaxmi Inspection Services as a Required Job Inspector for Visual Inspection on a full-time, on-site basis. Your main responsibility will be to conduct visual inspections to ensure product quality and adherence to specifications. This will involve carrying out thorough checks, identifying any discrepancies, preparing detailed reports, and collaborating closely with the engineering team to address any issues. It is essential for you to ensure compliance with industry standards and safety regulations as part of your role. To excel in this position, you should have experience in visual inspections and Quality Control, along with proficiency in using inspection tools and equipment. Strong attention to detail and analytical skills are crucial, as well as excellent written and verbal communication abilities. You must be capable of working both independently and as part of a team. Possessing relevant certifications such as ITI, Diploma, or a degree in Engineering, along with a minimum of 2 years of hands-on experience in instrument handling, will be advantageous. Additionally, experience as a supervisor handling and executing daily activities while maintaining strong customer relations will be beneficial.,

As a Port Equipment Technician at Liebherr India Private Limited, your primary responsibility will be to diagnose, adjust, repair, and overhaul various port equipment such as harbour mobile cranes, reach stackers, ship cranes, offshore cranes, and construction machinery including duty cycle crawler cranes, crawler cranes, and foundation equipment. You will be utilizing your expertise in electrical, electronic, hydraulic, and mechanical theory to test and modify operational machinery and equipment. Operating machines for testing, inspection, diagnosis, and troubleshooting will also be part of your day-to-day tasks. Setting a positive example in punctuality and professional demeanor, maintaining respectful communication with all staff levels, ensuring clean and orderly work areas, and promoting safety regulations and company programs will be crucial aspects of your role. You will also be responsible for testing repaired or modified mechanical products and equipment to ensure proper performance and compliance with manufacturers" specifications. In addition, you will dismantle and reassemble heavy equipment, conduct routine maintenance work on Liebherr machines, and examine parts for damage or wear using relevant measuring devices. Reading and interpreting operating manuals, blueprints, and technical drawings will be essential for your tasks, along with ensuring the efficiency and safe operation of machines through overhaul and testing. Completing assigned paperwork accurately and timely, overseeing the maintenance of quality standards, handling hazardous wastes responsibly, and participating in factory authorized training are integral parts of your role. You will also be expected to demonstrate a working knowledge of Liebherr Service Software, prepare for jobs diligently, complete tasks independently, assist customers with troubleshooting, and attend training sessions as required. Furthermore, maintaining a minimal set of tools and Personal Protective Equipment (PPE), caring for company tools and equipment, and upholding a positive attitude as a role model for other employees are key components of your responsibilities. As a Port Equipment Technician, you will also be required to refuse any unsafe tasks, adhere to company procedures and technical rules, and restrict assigned tasks to ensure safety. To excel in this role, you must have completed a technical apprenticeship covering electric, electronic, mechanical, and hydraulic training. Experience with part lists, maintenance of cranes or similar machines, fault finding in electrical, mechanical, and hydraulic systems, and control systems is essential. Additionally, you should possess strong communication, negotiation, organizational, and problem-solving skills, along with the ability to handle confidential information. Liebherr India Private Limited offers compensation at par with industry standards, corporate health insurance, term life insurance, financial stability, annual reviews, service awards, career progression opportunities, and a dynamic and safety-focused team environment. If you are interested in joining our team, we encourage you to submit your online application. For any inquiries, please reach out to Ms. Akshata Haldankar. Join us at Liebherr India Private Limited and be part of a company dedicated to sales and customer service of various heavy machinery and equipment in India and neighboring countries. Location: Liebherr India Private Limited Head Office Unit A301- A305, 3rd Level, (5th Floor), A Wing, Tower 1, Seawoods Grand Central, Plot R-1, Sector - 40, Nerul Node, Seawoods, Navi Mumbai, Maharashtra 400706. Contact: Ms. Akshata Haldankar Email: akshata.haldankar@liebherr.com One Passion. Many Opportunities.,

Job Title: Line Inspector / Final Inspector (Machine shop) Fresher or 2-5 Years Experience Location: Coimbatore Salary Details: Position Experience Salary Range (/month) Line Inspector 2+ yrs. 20,000 25,000 Final Inspector 2+ yrs. 25,000 30,000 Fresher Diploma holders 17,000 Fresher B.E. 18,000 Job Roles: 1. Line Inspector Inspect machined parts on the production line Use measuring tools Ensure parts meet dimensional and visual standards Report issues to supervisors 2. Final Inspector Conduct final quality check of finished components Ensure product compliance before dispatch Prepare inspection reports and maintain documentation Key Skills: Basic knowledge of measurement tools and quality processes Ability to read engineering drawings (preferred) Attention to detail and documentation Qualification: Diploma in Mechanical / B.E. Mechanical or related streams Experience: Freshers eligible Candidates with 2-5 years experience in quality inspection / machine shop preferred Share your profiles to jayaprabha.a@cielhr.com WhatsApp/Call: 9789052080

Job Location: Khandala MIDC, Phase-II, Village Kesurdi, Tal.- Khandala, Dist.- Satara, Maharashtra. Designation: Officer Department: Quality Management Formal education: DME only Professional experience: 4 to 5 years Role & responsibilities: Perform dimensional & visual inspection of machined parts in house Inspection of machined/fabricated items at sub-vendors Perform instrument calibration Maintain records & reports of calibration. Prepare inspection report of parts. Defined competencies: Knowledge and well familiar with measuring instruments to measure linear and Geometric dimensions ( GD &T) Knowledge of instrument calibration Knowledge of machines and fabrication processes. Awareness of NDT Tastings. Well understood machining drawings. Behavioral Competencies: Communication Creativity Decision makin Good organiz Positive attitude Smart worker Knowing customer needs Capable to understand & resolve customer, TPI, work related issues. Perks and benefits: Insurance Transportation Canteen

Knowledge of instrument handling - vernier, mic, and height gauge. Knowledge in Drawing reading as per standard and updating in inspection sheet. Visual and dimension inspection. Performing Inspection using SOP. immediate joiner.

Good knowledge in Visual Inspection & Gauge Inspection. Ability to identy defects in Plastic Injection & Blow Moulding Shrinkage, Sinkmark, Excess.Material Damage, & Scratch mark. Knowledge in handling measuring Instruments.

As a Quality Inspector at Siemens Gamesa Wind Power, your day will be dynamic and engaging. You will start by conducting visual and dimensional inspections of wind turbine components on-site at a wind farm. Your meticulous attention to detail ensures compliance with technical specifications and quality standards. You will perform Non-Destructive Testing (NDT) and verify welding quality, coating thickness, and bolt torquing. Your role includes maintaining detailed inspection records and collaborating with a diverse team to resolve quality issues and implement improvements. You will conduct thorough inspections of wind turbine components to ensure flawless performance and perform Non-Destructive Testing (NDT) to identify potential issues and maintain safety. In addition, you will maintain and document comprehensive inspection records and quality control measures. Collaborating with engineering and project teams will be essential to successfully implementing quality improvements. Leading quality audits and participating in supplier assessments to ensure adherence to standards will also be part of your responsibilities. Furthermore, providing training and guidance to junior inspectors and site teams to foster a culture of excellence will be crucial. To excel in this role, you must have a proven ability to conduct visual and dimensional inspections with exceptional attention to detail. Expertise in Non-Destructive Testing (NDT) methods like ultrasonic, magnetic particle, and dye penetrant inspections is required. Strong organizational skills and the ability to work independently as well as part of a collaborative team are essential. Exceptional problem-solving skills and an attitude geared towards addressing challenges will be beneficial. Excellent communication and interpersonal skills are necessary to engage with colleagues and collaborators at all levels. A self-motivated attitude with the capability to make decisions with minimal supervision is also key. Joining the quality team at Siemens Energy, you will be part of a group of exceptionally skilled professionals dedicated to ensuring world-class quality in wind construction projects. The team works collaboratively across various functions, strictly adhering to international standards, and continuously striving for improvement. Together, you will drive Siemens Energy's mission forward by ensuring the highest quality standards in projects. Siemens Gamesa - Wind power, under Siemens Energy, innovates energy tech for balanced, reliable, and affordable solutions. The company values diversity and inclusion, celebrating character regardless of ethnic background, gender, age, religion, identity, or disability. The organization energizes society through diversity and inclusion, fostering an environment where all differences are embraced. Employees at Siemens Energy enjoy benefits such as automatic coverage under Medical Insurance, considerable Family floater cover, Meal Card option, comprehensive health and wellness benefits, opportunities for professional development and continuous learning, an encouraging and inclusive work environment that values collaboration and innovation, and the opportunity to work on brand-new technology and make a significant impact on the renewable energy industry.,

1. To perform Area cleaning. 2. To perform Equipment operation and cleaning. 3. To perform the visual inspection and packing activities. 4. To perform the documentation as per Batch record and SOP. 5. Responsible to maintain documents as per cGMP norms. 6. Ensure the training completion before doing activity. 7. Maintain personal hygiene. 8. Reporting all the activities, incidents and problems to Reporting officer.

1. To perform Equipment operation and cleaning. 2. To supervise the Visual inspection and batch packing execution as per plan. 3. To perform the documentation as per Batch record and SOP. 4. To perform the equipment qualification as per protocols and SOP. 5. Responsible to maintain documents as per cGMP norms. 6. Co-ordinate to cross functional team as per day-to-day activities. 7. Responsible for SOP, MPR and BPR preparation and revision. 8. Co-ordination with team to execute daily packing and visual inspection plan. 9. Ensure the training completion before doing activity. 10. To raise batch record request as per plan. 11. Responsible for QMS related activity(Change control, Deviations, Batch record) in packing and visual inspection activity. 12. Monitor day to day activities. 13. Reporting all the activities, incidents and problems to Reporting officer

1. To perform Equipment operation and cleaning. 2. To supervise the Visual inspection and batch packing execution as per plan. 3. To perform the documentation as per Batch record and SOP. 4. To perform the equipment qualification as per protocols and SOP. 5. Responsible to maintain documents as per cGMP norms. 6. Co-ordinate to cross functional team as per day-to-day activities. 7. Responsible for SOP, MPR and BPR preparation and revision. 8. Co-ordination with team to execute daily packing and visual inspection plan. 9. Ensure the training completion before doing activity. 10. To raise batch record request as per plan. 11. Responsible for QMS related activity (Change control, Deviations, Batch record) in packing and visual inspection activity. 12. Monitor day to day activities. 13. Reporting all the activities, incidents and problems to Reporting officer.

1. To perform Area cleaning. 2. To perform Equipment operation and cleaning. 3. To perform the visual inspection and packing activities. 4. To perform the documentation as per Batch record and SOP. 5. Responsible to maintain documents as per cGMP norms. 6. Ensure the training completion before doing activity. 7. Maintain personal hygiene. 8. Reporting all the activities, incidents and problems to Reporting officer.

Quality Engineer Bangalore FTC : 12 + Month Extendable Good knowledge of Measuring Instruments (CMM- Coordinate Measuring Machine, Contour) Good knowledge of Geometric Dimension & Tolerancing & Numerical Master Geometry. Good knowledge of components and sub-assemblies drawings. Good in dimensional and visual inspection of Machines components, Sheet Metal, Welded components/ Pipes and Jigs and Tools. Can verify calibration reports of Jigs and Fixtures. Can prepare inspection reports Joining will be Immediate, with in 15days Language: Kannada Must

Good knowledge in Visual Inspection & Gauge Inspection Ability to identy defects in Plastic Injection & Blow Moulding Shrinkage,Sinkmark,Excess MaterialDamageScratch mark Knowledge in handling measuring Instruments Vernier

As a Line Clearance Specialist, you will play a crucial role in ensuring the effective verification of job orders for correct resin, MB grade, packing quantity, product code, and customer details. Your responsibilities will include verifying the cleanliness and readiness of the machine and surrounding areas, ensuring compliance with FSMS requirements by removing any dust, dirt, oil, grease, loose nuts, bolts, and tools. Furthermore, you will be tasked with clearing the machine area of previous run documents, samples, raw materials, masterbatches, and regrind materials. It will be your responsibility to confirm the error-proofing mechanisms on the machine are operational, conducting visual and functional tests on line clearance samples, and promptly documenting test results for timely decision-making and communication. In addition, you will be required to provide line clearance reference samples and first shot approvals to the machine operator, conduct visual inspections and testing of finished goods according to approved sampling plans, and make decisions in alignment with applicable Acceptable Quality Levels (AQLs), with all results accurately recorded in the relevant forms. Identifying non-conforming products, blocking them in the Alpla production system, updating the Non-Conformance Report (NCP) tracker, monitoring rework activities, sampling, inspection, and documenting results will also be part of your duties. You will perform functional testing as per the specified frequency, make decisions based on the outcomes, and document the results accordingly. Moreover, as a detail-oriented professional, you will conduct dimension inspections of products as per the approved sampling plan, make decisions in line with the applicable AQLs, and document the results accurately. You will also be responsible for managing and maintaining monitoring and measuring equipment by performing internal calibrations of laboratory equipment as per the required schedule. Working with us, you can expect a range of benefits including free transportation, a positive working culture, a clear growth path, subsidized canteen meals, free uniforms, provided personal protective equipment (PPE), on-time salary disbursement, national and festival holidays, various celebrations, and opportunities for continuous training and development.,