24 Vision System Jobs

PLC programming,HMI, Visions Software

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview The Aerospace, Defense and Marine (Aerospace, Defense and Marine or AD&M) business unit of TE is part of the Industrial Solutions segment (Industrial Solutions) and is a world leader in the design of components and electrical interconnection solutions that are used for applications in extreme and rigorous environments. These interconnection solutions make possible applications of avionics, jet and propulsion engine management, flight controls, grounding systems and on-board entertainment for today's "connected aircraft". This capability is extended to military, marine, aviation, space, land and drone vehicles, as well as oil and gas exploration of open-ocean deposits. TE offers solutions for enhanced connectivity that work and resist in the most extreme environments on Earth, from the deepest oceans to the ends of space. ROLE OBJECTIVE NC collection, review / MRB Dispositions / Piece Part rejections handling- co-ordinate with incoming quality / Rejection summary reports / Quality cost reports preparations Responsibilities Day to day general maintenance and monitoring of plant utilities such as : 1. Generator 2. Compressor 3. LT Panel 4. Electrical & Civil maintenance (furniture s, fixtures & fitting, plumbing etc.,) Routine & periodical checks of machines & equipment s used for production as per the planning Must put a visible maintenance planning on each equipment and prepare a maintenance planning for the tools. Executing the preventive maintenance as per the planning. As well review & validate the effective functioning of equipment. Effective handling of break down maintenance, by studying MTTR, MTBF & other effectiveness monitoring tools. Effective communication, as well as analytical and problem-solving skills Maintain records of preventive and break down maintenance as per ISO and AS requirement. Effective monitoring & implementation of permanent action about breakdown. Knowledge & execution of continual improvements, SMED etc To keep list of machineries and equipment s and check list. Define and maintain an inventory of spares in order to repair the equipment s as per the technical documents. Prepare specifications for purchase of materials & spares. Knowledge on TPM, and other basic tools. To Co-ordinate for installation and setup activity. Assure product quality by testing product and system capabilities (Cm, Cmk) Adequate knowledge about PLC/CNC controls. & Monitoring of electrical equipment. Liaising with supplier, fabricators & other contractors. Develop budgets, estimating labor, material costs. Plan layout of electric power generating units, pneumatics lines and distribution lines and stations. Prepare and study technical drawings, specifications of electrical systems, and operations conform to standards and customer requirements. Ensure EHS standards are being implemented and followed. Supervising the team of permanent and temp workforce Ensure that required AMCs are established and that the contracts are renewed periodically. Keep equipment operational by following manufacturer s instructions and procedures. Requesting service repairs. Should bring improvement proposals in respect cost controlling and improvement activities. Candidate Desired Profile: EDUCATION/KNOWLEDGE / QUALIFICATIONS & EXPERIENCE BE/BTec E&C/ E&E / Mechatronics or equivalent. CRITICAL EXPERIENCE Minimum 10-12 yrs in maintenance TECHNICAL COMPETENCIES PLC/CNC Controls/Automation supports with Vision system Electrical and Mechanical Systems. Basic Knowledge on Pneumatic /Hydraulic systems. BEHAVIOURAL COMPETENCIES Good communication skills Strong Presentation skills Organizing and Time management skills Customer focus SET Strategy, Execution, Talent ValuesIntegrity, Accountability, Teamwork, Innovation, Inclusion MOTIVATION/CULTURE FIT: Passion for technology Quick learner Innovative in thinking Team player Competencies Managing and Measuring Work Motivating Others Building Effective Teams SET Strategy, Execution, Talent (for managers) ABOUT TE CONNECTIVITY TE Connectivity plc (NYSETEL) is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 9,000 engineers, working alongside customers in approximately 130 countries, TE ensures that EVERY CONNECTION COUNTS. Learn more at www.te.com and on LinkedIn , Facebook , WeChat, Instagram and X (formerly Twitter). WHAT TE CONNECTIVITY OFFERS: We are pleased to offer you an exciting total package that can also be flexibly adapted to changing life situations - the well-being of our employees is our top priority! Competitive Salary Package Performance-Based Bonus Plans Health and Wellness Incentives Employee Stock Purchase Program Community Outreach Programs / Charity Events Across our global sites and business units, we put together packages of benefits that are either supported by TE itself or provided by external service providers. In principle, the benefits offered can vary from site to site. Location

Dear Candidate, We are hiring a Machine Vision Engineer to develop vision-based inspection, object detection, and automation systems. Great for engineers skilled in image processing and deep learning. Key Responsibilities: Design vision systems for defect detection, OCR, and tracking Develop image processing algorithms using OpenCV or MATLAB Integrate vision hardware with robotic systems and automation platforms Apply deep learning techniques for object recognition and classification Required Skills & Qualifications: Proficiency in C++, Python, and vision libraries (OpenCV, Halcon) Experience with camera calibration, lighting, and lens systems Knowledge of ML/DL frameworks (TensorFlow, PyTorch) Bonus: Experience with industrial cameras and automation protocols Note: If interested, please share your updated resume and preferred time for a discussion. If shortlisted, our HR team will contact you. Kandi Srinivasa Reddy Delivery Manager Integra Technologies

Role & responsibilities Plant Machinery Maintenance (PM,BM& CM). Maintain the departments Documentation. Knowledge of PLC Programming. Knowledge of Vision system. Knowledge of LT Panel ,VCB, Transformer.

Job location - Hyderabad Job title - Sr. Network Engineer PC & IS Network engineer Job description - Education and Experience: B.Tech in IT/Electrical Engineering with at least 5 years of experience . Experience working in P&G preferred. Skills Required: Controls & PC&IS: 1. Logic and programming in Allan Bradley PLC 2. Logic and programming in Mitsubishi PLC 3. Communication setup across HDL line PLCs and vision system Network: 1. Defining network architecture (AED/TID) 2. Execution and implementation of network architecture 3. Completing iRisk and CSV for applications 4. Switch and port configuration and enabling firewall rules, configuring ping integrations on applications 5. Establishing communication between OT/IT layers Admin & communication: 1. Coordinating with Europe and US teams 2. Incorporating inputs, creating documentation, and sharing MoM

Experienced Automation Engineer with a strong background in PLC programming, MES, and SCADA system implementation. Proficient in database administration, Kepware integration, and OPC communication, with expertise in IIoT applications using AVerMedia, Linux, and ESP32. Skilled in vision systems, robotics with Omron cobots and Fanuc robots, and various control systems. Adept at optimizing industrial processes through SCADA solutions (Iconics, FactoryTalk View SE), Node-RED, and MSSQL. Role & responsibilities Preferred candidate profile

Role & responsibilities We are seeking highly skilled and motivated Special Purpose Machine (SPM) Designers to join our dynamic team in Bangalore. As an SPM Designer, he will play a key role in conceptualizing, designing, and developing custom automation solutions to address the specific requirements of our clients. As a leader he will lead a team of other designers Preferred candidate profile BE/ B.tech, Diploma Mechanical engineer, with good experience in Designing SPM's, Expert in PLC programming and Vision Systems

hands-on exp in robotic maintenance within the automotive manufacturing sector, specifically in wheel manufacturing. (Exp with vision systems and automated material handling equipment.)

It will be good if he is already working or having hands on experience in flexible packaging industry. Having minimum sales experience of 3-7 years in Sales Our product required the basic skills of electronics, electrical and Mechanical Required Candidate profile Generating new enquiries and customers for company product range through various channels (cold calling, networking, referrals) Ensure to retain existing customers and add new customers.

PLC Programmer In Automation & Robotic Job Description: -We have requirement for PLC Programmer with 5+ year experience in Automation & Robotic application -Candidate must have thorough knowledge and hands- on experience of PLC, HMI, SCADA ladder programming and its logic designing (Omron,Delta, & Mitsubishi, Allen Bradley, Siemens). -Candidate must have thorough knowledge Servo Motor driver, stepper motor driver -Must be conversant with all electrical and electronics components, all communication systems like Modbus,RS232,Ethernet TCP/IP, and PI Protocol etc. -Able to design and draw the electrical control circuits in AUTOCAD software. -Able to select the component as per logic and make BOM. SALARY: INR 4, 00,000- 8, 00,000 PA.(negotiable) Industry: Industrial Products, Heavy Machinery Functional Area: Engineering Design , R&D Role Category: Engineering Design(Programming) Role: Technical Lead/Project Lead Employment Type: Full Time, Permanent

Job Description: Maintenance Department - Associate Role Position : Associate in Maintenance Department (Press / Body / Assembly / Engine Shop) Experience : 3-8 Years Location : Pune (Talegaon) Education : Diploma in Electrical/Mechanical Engineering (Full-time only) CTC : Competitive based on experience About the Company: We are a globally recognized OEM in the automotive industry, committed to innovation, quality, and sustainability. Our team focuses on delivering superior products, and we are looking for highly skilled professionals to join us in maintaining high standards in all aspects of manufacturing operations. Roles & Responsibilities: Electrical Engineer: Experience in Industrial Robotics and PLC Troubleshooting , with knowledge of various PLC communications. Experience working with Vision Systems and Siemens Drives / SEW Drives , as well as different types of sensing devices and electrical hoists . Mechanical Engineer: Expertise in different types of conveyors (Power & Free, Friction, Roller, and Chain), as well as vertical drop lifters . Experience with Industrial Robots and Sealer Application Systems . Hands-on experience with Fluid Filling Machines (Coolant, AC, Brake fluid, etc.) and air handling units . Common Skills: Strong understanding of Pneumatic Systems , Hydraulics , and Preventive Maintenance techniques. Proven ability in Breakdown Maintenance , ensuring minimal production downtime. Skills & Competencies: Electrical Engineering : Proficiency in industrial robotics, PLCs, vision systems, and electrical hoists. Mechanical Engineering : Experience with conveyors, fluid filling machines, industrial robots, and sealer application systems. Problem-Solving : Strong troubleshooting skills with the ability to address complex maintenance issues swiftly and efficiently. Preventive Maintenance : Ensuring proper maintenance schedules and reducing unplanned downtime. Teamwork : Ability to work effectively within a team environment to ensure smooth production operations. Education: Qualification : Diploma in Electrical/Mechanical Engineering (Full-time only ) Experience : 3-8 years of relevant experience in maintenance, with exposure to automotive manufacturing environments. please share your cv at contact rajni.tiwari@taggd.in

PLC Programing (Siemens, Rockwell, Mitsubishi, Allen Bradley). Drives Programing (Siemens, Rockwell, Mitsubishi, Allen Bradley). HMI Programing (Siemens, Rockwell, Mitsubishi, Allen Bradley). Vision System (Cognex, Keyence). Required Candidate profile Candidate should be B.E. Mechanical / Electrical / Automobile with 6-10 years experience as "PLC Programmer" in an "Industrial Automation Company". Perks and benefits Company's Transportation & Canteen Facility.

Role & responsibilities To improve current process - Machines by modifying PLC programs, adding sensors vision system to include POKA YOKE control and deskilling. To develop New SPMs with Automation, Machine sensors to meet Industry 4.0 Practices. To work on Digitalization and interlinking of Traceability systems in Machines by connecting all shop floor machines. Preferred candidate profile LabView Dot net PLC programming - To create new logic, modify improve and add on in existing logics for improvement Vision system installation, Programming using Python program and other inbuilt software's with Keyence, Cognex etc., Servo Motor, Drives, HMI programming, troubleshooting Troubleshooting and improvements in Servo based, Hydraulic and Pneumatic based SPMs Traceability systems - Dot marking, Laser marking handling and its interlink with Machines Proximity switches, Sensors applications Perks and benefits

Role & responsibilities Knowledge of following software and hardware. Cognex software (Spread sheet and Easy Builder) Labview Software (troubleshooting) Selection of Camera & Lens as per requirement. PC hardware and window and image download

Job Description: Machine Vision Engineer Vision-Based Inspection Systems Position: Machine Vision Engineer Location: Hyderabad Company: Optomech Engineers Pvt. Ltd. Experience: 1-2 years (Preferred in Vision Systems & Automation) Employment Type: Full-time About Us: Optomech Engineers Pvt. Ltd. is a leading manufacturer of precision vision-based inspection machines for industrial quality control. With over 40 years of experience , we specialize in machine vision solutions for industries such as packaging, pharmaceuticals, FMCG, and automotive. To enhance our automated inspection systems , we are looking for a LabVIEW-trained engineer to develop and optimize software for high-performance vision inspection solutions . Key Responsibilities: Software Development: Design, develop, and implement LabVIEW-based applications for vision inspection machines . Machine Vision Integration: Work with industrial cameras, image processing algorithms, and NI Vision libraries to enhance inspection capabilities. Hardware & Software Interface: Interface LabVIEW applications with PLC, motion control systems, sensors, I/O modules, and industrial communication protocols (Modbus, OPC, TCP/IP, etc.) . Algorithm Optimization: Develop and fine-tune image processing algorithms for defect detection, pattern matching, barcode reading, OCR, and other vision applications. Testing & Debugging: Perform rigorous testing to ensure accuracy, speed, and reliability of the inspection software. System Calibration: Collaborate with mechanical & electrical teams to calibrate cameras, lighting, and optics for optimal vision performance. Technical Documentation: Create user manuals, system flow diagrams, and software documentation. Customer Support: Provide remote and on-site support for software updates, troubleshooting, and optimization. Required Skills & Qualifications: Bachelors/Masters degree in Electronics, Instrumentation, Computer Science, or related field. 1 + years of hands-on experience in LabVIEW application development. Proficiency in NI Vision Development Module & LabVIEW FPGA/Real-Time is a plus. Knowledge of image processing techniques, OpenCV, and AI-based vision inspection is an advantage. Experience with DAQ, NI hardware, and industrial automation systems . Strong debugging, analytical, and problem-solving skills. Ability to work independently and in a cross-functional team . Why Join Us? Work on cutting-edge vision-based inspection technology . Exposure to industry-leading automation & AI solutions . Opportunity to lead innovative projects in machine vision & automation. Competitive salary, growth opportunities, and a dynamic work environment. If you are passionate about LabVIEW, vision systems, and industrial automation , we would love to hear from you!

Role & responsibilities Expertise in troubleshooting electrical hardware, including sensors, servo motors, stepper motors, switches, drives, and more. Hands-on experience with Vision CCD systems, such as Cognex, Keyence, and similar technologies. Comprehensive experience in automation equipment installation and validation processes. Familiar with key machine validation metrics, including CPK, GRR, safety standards, and more. Proficient in industrial communication protocols such as Ethernet/IP, Modbus, RS232, RS485, and ProfNet. Extensive maintenance experience in laser welding, laser marking, glue dispensing and pick-and - place automation equipment.

Siemens S7 1200 & S7 1500 Series PLC programming for“MACHINE CONTROL”application using TIA Portal Siemens KTP/TP Series HMI Interfacing of field devices Proximity sensors Photo sensors Bar code printers Bar code scanners RFID reader Vision systems Required Candidate profile . B.E-Electrical/Electronics/Instrumentation Experience on working with Siemens WinCC SCADA Siemens VFDs G120 , V20 Rockwell (Allen Bradley) PLCs CompactLogix Mitsubishi PLCs FX / Q / R Series PLCs

A PLC & SCADA Engineer is responsible for designing, programming, troubleshooting, and maintaining Programmable Logic Controllers (PLC) and Supervisory Control and Data Acquisition (SCADA) systems. The role involves automation system development, integrating control systems, and ensuring seamless industrial operations. Key Responsibilities: 1. PLC Programming & Configuration Develop, test, and implement PLC programs for automation systems. Configure and troubleshoot PLC hardware and software (Siemens, Allen-Bradley, Schneider, etc.). Optimize PLC logic for improved system efficiency and performance . Modify and update existing PLC programs as per process changes. 2. SCADA System Development & Integration Design and configure SCADA systems for industrial automation. Develop HMI (Human-Machine Interface) screens for operator control and monitoring. Integrate SCADA with PLCs, sensors, and databases for real-time data acquisition. Ensure proper alarm management and reporting in SCADA systems. 3. Troubleshooting & Maintenance Diagnose and resolve PLC/SCADA-related faults and malfunctions . Perform preventive maintenance and ensure system reliability. Provide technical support for automation-related issues. Work with electrical and mechanical teams to resolve equipment failures. 4. Industrial Automation & Process Control Develop and implement automation strategies to improve efficiency. Work with process engineers to optimize control logic for better output. Ensure proper communication between field devices, PLCs, and SCADA . Conduct Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) . 5. Documentation & Compliance Prepare detailed technical documentation (PLC logic, SCADA configuration, wiring diagrams). Ensure compliance with industry standards (IEC, ISA, etc.) and safety regulations. Maintain records of program changes, backups, and configurations . Develop and update Standard Operating Procedures (SOPs) for automation systems. 6. Project Management & Collaboration Work with project teams, clients, and vendors for automation projects. Participate in system design, commissioning, and validation activities. Coordinate with IT teams for SCADA networking and cybersecurity . Provide training to operators and maintenance personnel on PLC/SCADA systems. Technical Skills: Proficiency in PLC programming (Siemens, Allen-Bradley, Schneider, Mitsubishi, etc.) . Expertise in SCADA/HMI development (Wonderware, WinCC, Ignition, GE iFIX, etc.) . Knowledge of industrial communication protocols (Modbus, Profibus, Ethernet/IP, OPC, etc.) . Familiarity with VFD (Variable Frequency Drive) control and integration . Understanding of pneumatic, hydraulic, and electrical control systems . Hands-on experience with DCS (Distributed Control Systems) and IIoT solutions is a plus. Soft Skills: Strong problem-solving and analytical skills . Ability to work independently and in a team environment . Good communication and documentation skills . Ability to work under tight deadlines and handle multiple projects . . Certifications (Preferred but Not Mandatory): Siemens PLC Certification Rockwell Automation Certification SCADA System Certification Industrial Safety & Control System Training Work Environment & Conditions: Office-based work with frequent visits to manufacturing plants/sites . May require travel for installation, commissioning, and troubleshooting. Availability for on-call support for critical automation systems.

Role & responsibilities 1. Proficiency in PLC & Motion programming languages (e.g., Ladder Logic, Structured Text) 2. Familiarity with robotics programming and integration 3. Knowledge of SCADA system configuration and operation 4. Understanding of industrial networking protocols (e.g., Ethernet, Profibus) 5. Expertise in electrical and mechanical systems System Design and Implementation: Develop automation concepts and designs for manufacturing processes, including control logic, hardware selection, and system architecture. Configure and program PLCs (Programmable Logic Controllers) to control machinery and production lines. Integrate SCADA (Supervisory Control and Data Acquisition) systems for data monitoring and visualization. Design and implement robotic systems within production lines. Installation and Commissioning: Install and wire automation components on-site. Conduct system testing and commissioning to ensure proper functionality. Troubleshoot and resolve system errors during installation and operation. Maintenance and Support: Provide ongoing maintenance and support for automated systems, including software updates and hardware repairs. Monitor system performance and identify potential issues. Respond to system malfunctions and implement corrective actions. Project Management: Collaborate with cross-functional teams to define project scope, timeline, and budget. Develop project documentation including design specifications, technical drawings, and user manuals. Manage project deliverables and ensure timely completion within budget constraints. Preferred candidate profile Bachelor's degree in Electrical, Electronics, Instrumentation or Mechatronics Engineering or a related field Experience with industrial automation systems and components Strong programming skills in PLC languages Ability to read and interpret electrical schematics Excellent problem-solving and troubleshooting skills Perks and benefits Travel Allowance Food Allowance Incentive PF & Insurance ( Coming Soon )

Role & responsibilities CCD Vision Expert Hands on experience in Cognex /Keyence or relevant *Candidates who are currently staying in Pune & willing to relocate to Bangalore only apply*

Role & responsibilities We seek a highly skilled Senior Software Developer Automation to drive the development, testing, deployment, and support of PC-based automation software in the EMS industry . The ideal candidate will be responsible for machine qualification (MQ1 & MQ2, FAT & SAT) , software integration with MES/ERP systems , and providing post-MQ2 customer support. You will lead innovative software solutions for industrial automation , ensuring standardization and best practices across the team. Preferred candidate profile Develop, test, and deploy PC-based automation software for manufacturing systems. Design and implement Windows applications using VB.Net & C# within Visual Studio . Develop DAQ-based (NI/Advantech/Adlink) applications for real-time data acquisition and control. Work on motion control systems & vision system integration . Ensure seamless software integration with MES/ERP systems . Offer technical assistance for machine qualification (MQ1 & MQ2) , including Factory Acceptance Testing (FAT) & Site Acceptance Testing (SAT) . Technical Skills : LabVIEW Development (Must) Languages: VB.Net, C++, C#, python (added advantage) Development Tools: Visual Studio Database Management: MS SQL Perks and benefits

Role: Application Engineer Location: Bangalore Experience: 1-3 years in Machine vision/industrial automation Joining Date: 1 Month Company: Qualitas Technologies Pvt Ltd and Group of companies (Datasensor India Pvt ltd) Overview:- We are seeking a motivated and technically proficient Application Engineer to join our dynamic team and work closely with cutting-edge Machine Vision product line-up . This position offers excellent growth opportunities in cutting-edge industrial automation technologie s like machine vision, artificial intelligence, and advanced automation. Selected candidates will play a pivotal role in assisting our customers with system integration and optimization. The candidate should possess a strong sense of initiative and a passion for solving complex technical challenges. Technical Requirements: A technical degree (B.E./M.E./M.Tech.) in Mechatronics, Electrical, Electronics, Instrumentation, or similar engineering domain. Good understanding of electrical parts/components used in an automation control panel. Ability to follow procedures. Identifying the right machine vision solution (including image acquisition hardware and deployment software) for an industrial automation application. Experience in machine vision application engineering/industrial automation. Regular communication and visiting sites for study and analysis of customer requirements. Drive the project throughout its life cycle, from design to deployment & support. Regularly monitoring project status and updating progress to supervisors. Installation and commissioning of the machines at client sites. Supporting/attending breakdown calls and troubleshooting of machine faults. Conduct system integration testing for performance verification. Desired Candidate Profile: Electrical parts/components used in an automation control panel. Ability to follow procedures. Must be familiar with Microsoft Office applications. Willingness to travel to customer sites (25%) travel within India required. Good to Have: Familiarity with machine learning, deep learning, and computer vision will be preferred. PLC Programming will be a bonus Behavioral Requirements: Must be detail-oriented and analytical. Must possess good communication (written and oral) Must possess presentation and problem-solving skills. Must have a strong desire to learn. Possess a positive attitude and is a quick learner. Must be able to work independently and in a team with limited supervision.

Implement equipment maintenance for production efficiency Install new equipment for new product implementation electrical & pneumatic circuit understanding Required Candidate profile Diploma in Electrical, Electronic, mechanical or Mechatronics 2-5 years experience(preferred in automation/electronics industries) experience in Automation, Robotics & Process equipment

********NEW PLC PROGRAMMING MAKING & TROUBLESHOOTING REQUIRED******** Location : Neemrana Qualification :B.Tech (Electrical/Mechatronics) Experience : Min 4 years Designation : Engineer Work Description & performance Plan Summary of Job Profile/ Purpose of the position: To carry out SPM Building activities/Automation in plant premises including Low- cost automation in different section to reduce other variable heads such as manpower, electrical spare, consumable. Essential Duties & Responsibilities: 1. To plan for develop SPM press fit and SPM assembly inhouse for productivity improvement. 2. To plan for retrofit of existing machine improvement. Knowledge of Solid work design. 3. To plan for jig/Fixture development for smooth changeover and productivity. 4. Responsible for PLC Programming improvement activity . 5. To lead & assist job/ activities to subordinates & provide them resources to carry out these activities. 6. To prepare new spare procurement accordingly. 7. To maintain services for new machine installation & commissioning details. 8 To have cross functional team interactions & support for line Poke Yoke & improvements. Competencies required to successfully perform the job: Technical/Function Competencies 1. Should have Technical knowledge of various Electrical/Mechanical/Pneumatic/Hydraulic Systems. 2. Should be able to define the design of machine/equipment. 3. Should be able to define the alternate solution for critical equipments. 4. Should be able to plan/arrange required spares/equipments for smooth plant operation. 5. Should be able to perform design concept of SPM. 6. Should have able to guide subordinates & impart technical trainings to them. 7. Should have hands on experience of PLC, HMI, and Servo- Omron, Keyence, Mitsubishi and Siemens.